[Flexradio] flex 1500 minideluxe and ddutil

I set up this spreadsheet to sort and pair VAC and VSPE ports for PowerSDR, MiniDeluxe.and DDUtil https://docs.google.com/spreadsheet/ccc?key=0AgYEwMpiXdqwdDBCZzc0MnpWZ29NTjIxVnAwTG1hblE&usp=sharing The spreadsheet also includes port pairs for WSPR, WSJT, Bob's S Meter and another instance of Power

Re: [Flexradio] How can PowerSDR S-Meter be corrected to read S9 at -93 dBm on VHF/UHF?

ncy is corrected in the PowerSDR software, we must remember to add 3.3 S-units (20 dB) to the PowerSDR S-meter reading in order to give accurate S-meter reports above 30 MHz. Thanks. Carol On Sun, Apr 13, 2014 at 11:09 PM, Carol F. Milazzo, KP4MD/W6 < kp...@cfmilazzo.com> wrote:

[Flexradio] How can PowerSDR S-Meter be corrected to read S9 at -93 dBm on VHF/UHF?

The IARU Region 1 Technical Recommendation R.1 defines -93 dBm as S9 on VHF/UHF frequencies above 30 MHz and -73 dBm below 30 MHz. How can the PowerSDR S-meter readings be adjusted to correctly indicate S9 at -93 dBm when above 30 MHz to comply with this specification? Carol, KP4MD http://www.lis

[Flexradio] Interfacing VHF/UHF and Microwave Transverters to Flex 5000

Here are diagrams and photos of a FlexWire controlled three transverter selector built into a recycled DB25 serial switch box using a K3TUF FlexWire interface and a homebrew relay logic board. I also incorporated a DEMI 10 MHz frequency reference distribution amplifier for weak signal digital work

Re: [Flexradio] Any recommendations on a good foot switch?

I modified a $11 power tool foot switch from Harbor Freight Tools. It was quick and works great! Harbor Freight Tools power tool foot switch ($11 with 25% discount coupon) > modified for use as a foot operated push to talk switch with the FlexRadio. > Photo journal at > https://picasaweb.google.c

[Flexradio] $10 Foot switch and $10 Headset/Boom Microphone for FlexRadio

Harbor Freight Tools power tool foot switch ($11 with 25% discount coupon) modified for use as a foot operated push to talk switch with the FlexRadio. Photo journal at https://picasaweb.google.com/114032640816757126398/10FootSwitch The $9 Inland 87052 headset is quite comfortable and provides exce

[Flexradio] Flex-1500 and external frequency reference.

My GPS disciplined 10 MHz square wave frequency reference did not work with the Flex 1500 since the Flex 1500 reference input uses a bridge rectifier as a frequency doubler and requires a sine wave source. Since a square wave consists of a sine wave at the fundamental frequency combined with all i

Re: [Flexradio] ADC L and ADC R Imbalance and Phase 2 Display

My Inquiry: My FLEX-1500 Phase 2 display is displaced outside the center circle to the lower right quadrant and the ADC-L and ADC-R readings show a 4 dB difference. However, the FLEX-3000 Phase 2 display is properly centered with only a 1 dB difference between the ADC-L and ADC-R readings. The F

[Flexradio] ADC L and ADC R Imbalance and Phase 2 Display

My FLEX-1500 Phase 2 display is displaced outside the center circle to the lower right quadrant and the ADC-L and ADC-R readings show a 4 dB difference. However, the FLEX-3000 Phase 2 display is properly centered with only a 1 dB difference between the ADC-L and ADC-R readings. The FLEXRadio Knowl

Re: [Flexradio] Cleaning FLEX-3000 heat sinks, fans & vents

Thanks for sharing your experiences! I found clear explanations and photos of the procedure to open the Flex-3000 at http://www.df2of.de/Fan_Mod_Flex_3000.pdf and at http://flex-3000.blogspot.com/2009_03_01_archive.html Carol, On Mon, Oct 1, 2012 at 5:34 PM, Carol F. Milazzo, KP4MD/W6 <

[Flexradio] Cleaning FLEX-3000 heat sinks, fans & vents

After about two years of operating, the fans in my FLEX-3000 have gradually become noisier, just like when my computer heat sinks need a dust cleaning. Is there a recommended procedure for cleaning the FLEX-3000 internal heat sinks, fans and vents that will have accumulated dust over time? Carol.

[Flexradio] VAC not available in SSB modes?

I read this post and need to know if VAC is no longer available in SSB modes in PowerSDR 2.4.4. Those of us who run SSTV and on the 60 meter channels where both data and voice are allowed need to have access to VAC while in the SSB mode. Carol, KP4MD Rich - W3ZJ rich at w3zj.com Wed Sep 5 09:10:

Re: [Flexradio] Is there a way to make a movie of the panadapter during a QSO?

With freeware CamStudio http://camstudio.org/ you can make quality video clips from screen captures of your PowerSDR or other panadapter and waterfall displays. I have posted such a video that shows WSPR signals being decoded at http://wsprnet.org/drupal/node/2846 Carol KP4MD/W6 > Message: 2 > Da

Re: [Flexradio] The new 472-479 kHz band - REAL DX

I agree a bandpass filter makes sense for just 472-479 kHz. My low-pass filter was intended for receiving the entire LF range. Carol, KP4MD/W6 On Tue, Feb 21, 2012 at 8:25 AM, Brian Lloyd wrote: > > > On Mon, Feb 20, 2012 at 10:56 AM, Carol F. Milazzo, KP4MD/W6 < > kp...@cfmil

[Flexradio] The new 472-479 kHz band - REAL DX

Here is a description of a simple low pass filter with a 510 kHz cutoff frequency I built for my FLEX-3000 http://www.qsl.net/kp4md/lpfilter.htm Carol, KP4MD/W6 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailma