;s up.
If you're into hacking around at things a bit there's an X Server
that'll run on cygwin (free) too. This is what I use.
IIRC there's a VNCserver in ports somewhere too
--
Benmailto:[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Friday, January 31, 2003, 8:08:00 AM, you wrote:
PG> Ben Williams schrieb:
>> Friday, January 31, 2003, 3:55:02 AM, you wrote:
>>
>> AWA> Hi,
>> AWA> I need to connect to my FreeBSD box from a Windows PC using some kind of X
>> AWA> server for Windo
subscribe freebsd-questions
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
;disklabel -e" to set its fstype to "vinum".
P> Thanks,
P> pete
Maybe I'm being obvious here but have you tried a different cable
and/or controller?
First step: eliminate hardware as the cause.
--
Benmailto:[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
Monday, February 3, 2003, 1:59:52 AM, you wrote:
GgL> On Monday, 3 February 2003 at 1:34:02 -0500, Ben Williams wrote:
>> Sunday, February 2, 2003, 1:50:20 PM, you wrote:
>>
>> P> Hello... I have three hard drives in my system. One of them (the first)
>> P> i
I need to
check? I've set this up in the past under earlier releases and all I had to
do was comment out the lines in the ttys file and do a kill -HUP 1 and the
fact it's not working is driving me nuts. I welcome any and all
suggestions. Thanks in advance for your help.
Ben Compton
f: 26843545504.2BSD 1024 819216 # (Cyl.0 -
266305*)
thanks for any help - ben
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
t;
ifconfig_fxp0_alias2="inet x.x.x.x netmask
255.255.255.248"
ifconfig_fxp0_alias3="inet x.x.x.x netmask
255.255.255.248"
ifconfig_fxp0_alias4="inet x.x.x.x netmask
255.255.255.248"
alias0 is used as the IP address for the gateway
machine and my intention is to redi
then the
FreeBSD site.
At any rate, please if you can, help... while I write 1,000 times on the
chalkboard "I will not attempt an upgrade on the server when I don't have it
sitting in front of me."
Thanks,
Ben
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscr
original
alias0 - aliasx lines from rc.conf so the only fxp0
line is now for the main IP address for the interface:
ifconfig_fxp0="inet x.x.x.x netmask 255.255.255.248"
Regards,
Ben Craig.
--- "Alvaro Rosales R." <[EMAIL PROTECTED]>
wrote: > that's the problema , y
1. I use booteasy to allow me to boot between FreeBSD and Win 2k. However, the boot
menu has "??" when referring to Win 2k. Is there any way I can configure booteasy so
that it'll display "Windows 2000"?
2. Whenever KDE starts, the GNOME top menu and bottom slide bar comes up. It is
quite
Is there a way to change the desktop (i.e. KDE, GNOME, WM) on a user-by-user
basis?
_
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?page=features/virus
_
nnecting in the daytime. I thought of using a cron job to
start and stop ppp but is there a more elegant way?
Thanks,
Ben.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
above.
Any thoughts?
-Ben Polidore
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Earlier today, Edy Lie wrote:
> Anyone happen to know any windows terminal server client which allow cut
> and paste ?
> I have tried rdesktop but i was not able to cut and paste from local box
> to the windows terminal server.
Thinsoft has a Linux client that can cut and paste text.
http://www.t
I am currently using Window Maker as my desktop. Whenever I run any GNOME
app such as XMMS or GAIM, the GNOME panel and menu is superimposed on my
current desktop. Is there any way to prevent this?
Thanks in advance,
Ben
_
MSN 8
I am looking for a monitoring tool that will notify my cell phone when my
FreeBSD box is down or off line. It could be as simple as an application
that runs on another FreeBSD box or Win box and pings the server and when it
doesn't respond to pings it sends and alert to my cell phone. I'm sure
ile available in the same
directory, and have also verified the path
/usr/bin/vacation is correct.
But no vacation message... =/ Any suggestions would
be most appreciated.
Regards,
Ben Craig.
__
Do You Yahoo!?
Everything you'll ever need on o
nections that it is
not likely to be developed.
One thing I can tell you is that if DSL or Cable becomes available in my
area, I'll dump the satellite immediately. If you want more
information about my satellite experience, contact me off list.
-Ben
Are QLogic 2310F and 2340 HBAs supported under 4.8 and better? The man
page for isp mentions 2300 and 2312 HBAs, but there's no actual 2300 or
2312 HBA that I can find.
Just want to be sure before i drop the cash on 4 or 5 of these things.
Thanks
ry hard to describe, I will attempt to grab a picture and
> Ill repost. What should I do about this bug?
>
This sounds like a problem with X and your monitor. do you have the same
XF86Config in 5x as in 4x?
--
Ben Calvert
Stonehenge NetWorks
www.stonehenge-net.com
I think I see what's wrong:
Remington L. said:
> And now for extensive information. Heres my XF86config
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName"Monitor Model"
> EndSection
you have no information at all specified for y
ot;kevent produced error: " << strerror(errno) <<
std::endl;
}[/CODE]
When I run my code the kevent call in the worker code doesn't block at all.
Any ideas what I'm missing? or if what I want to do is even possible?
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
en file: " << "/tmp/tt" << " Error: " <<
strerror(errno) << std::endl;
// todo throw exception
}
struct kevent ke;
EV_SET(&ke, fd, EVFILT_VNODE, EV_ADD, NOTE_DELETE | NOTE_RENAME |
NOTE_EXTEND, 0, NULL);
if (kevent(kq, &ke, 1, NULL
Hi everyone,
I've been doing a lot of google searching recently for variants of
"freebsd source-based routing" to look for how to get a dual-homed
FreeBSD machine to send to the correct default gateway based on the
source address of the packets it's expecting that gateway to pass along.
You can't
close filename;
print my_number * 2;
Or if I completely misinterpreted your question, let me know :-)
~Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
of each line of the input file". So if your file had multiple
lines, that block would run multiple times. But since I'm guessing your
file only has one line (that being the number in question), the awk
block will only run once.
~Ben
___
f
text content that you know was there.
Sorry! And... good luck!!
~Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
it *correctly*. It sounds to me like it's warning against
deviating too far from the steps given in the example.
I can see as how the text might allow other interpretations,
though!
~Ben
(who is always careful to avoid using out-of-range values
with mktime() w
process will be able to use before swap starts being used.
~Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
ng to
what you think it's pointing to...
~Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
les are different?
Now *I'm* curious. :-) I've honestly never seen a system do that
before. If you figure it out, I hope you'll let either me, or the
list, know what it was!
~Ben
___
freebsd-questions@freebsd.org mailing list
e related or not. But I'm curious what
it shows if you run:
sysctl machdep.wall_cmos_clock
~Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
D boot blocks -- I don't
know.
But it seems to me like a prerequisite, in any case, is going to
be to set the FreeBSD partition to partition type 165, so that
the installer will recognize it as a FreeBSD slice. Is it already
partition type 165? If no
Hello,
I am making an online man, and I would like to know where could I find the
man.cgi script, in order to use it.
Could you help me to find it ?
Regards
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Thank you very much, that was what I was looking for.
2010/9/21 Lowell Gilbert
> Ben GUILLER writes:
>
> > I am making an online man, and I would like to know where could I find
> the
> > man.cgi script, in order to use it.
> > Could you help me to find
Does anybody know? Is it supported? Initially, I'll be using only one
monitor, but would intend to have both outputs in use in the longer term.
Sorry, I know there's a lot of questions in there, but I've been unable
to find the answered for myself so f
On 21/11/2010 17:25, Maciej Milewski wrote:
On Sunday 21 November 2010 17:19:05, Ben Quick wrote:
I don't really know what either of them are. I'm assuming the Matrix
Storage is the RAID controller. Is this supported? If not, I'll just use
gmirror, but will obviously have to be
function would be
preferred.
Any suggestions?
Ben House
Unified Network Services Inc.
(519)624-9405 Ext. 33
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
What about cpio? cpio -dplm should do what you need it to.
This operates in pass-through to give you a recreation of the directories
rather than an archive. Input is from standard i/p.
HTH.
BH
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Chuck Swiger
tion fault.
Has anyone got any ideas why?
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
eonasm.mooo.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Mon Feb
20 01:22:19 UTC 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/PLEONASM i386
dmesg is attached (if it makes it through the list).
Thanks,
Ben Kaduk
dmesg.boot
Description: Binary data
Sorry. left off some information that might come in handy!
me$ uname -srm
FreeBSD 6.0-STABLE i386
me$ pkg_info | grep tar
gtar-1.15.1_1 GNU version of the traditional tar archiver
startup-notification-0.8_1 Library that supports startup notification spec
from freede
me$
Thanks,
Ben
>
On Tuesday 21 February 2006 19:12, Lowell Gilbert wrote:
> Ben Paley <[EMAIL PROTECTED]> writes:
> > Sorry. left off some information that might come in handy!
> >
> > me$ uname -srm
> > FreeBSD 6.0-STABLE i386
> > me$ pkg_info | grep tar
> > gtar-1.15
ion faults.
It's come to that, has it?
Oh well... thanks very much for your help, I'll be back in touch with more
information soon!
Thanks again,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/fr
On Tuesday 21 February 2006 19:12, Lowell Gilbert wrote:
> Ben Paley <[EMAIL PROTECTED]> writes:
> > me$ pkg_info | grep tar
> > gtar-1.15.1_1 GNU version of the traditional tar archiver
> You're obviously not *using* gnu tar, because you would be getting
>
command which works for me is:
# mount -t msdos /dev/da0s1 /flash
Good luck,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
file itself is inconsequential, but the fact of
such blatant and relentless data corruption is very worrying to me! I don't
know if it's the file or my system or some combination... I'd really
appreciate some advice, I've been staring at it for two days and I'm starting
gather, it seems as though the only way to do
this would be to put a record in the campus DNS which isn't possible.
Any insight?
Thanks.
-Ben Racine
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freeb
nd-run on the campus dns and get it listed as a subdomain without
adding a record in the campus dns. But it doesn't look like there is
Thanks though,
-Ben Racine
On 9/24/05, nawcom <[EMAIL PROTECTED]> wrote:
> I was having the same issue here at where I work at University of
What would be a good set of hardware to run free bsd on?
Ideally I would like to have on motherboard raid and use of my dual head
nvidia agp card. And the AMD 939 chip.
Does anyone have and comparable systems?
--
cheers
Ben Siemon
cs.baylor.edu/~siemon <http://cs.baylor.edu/~sie
have more fun building it up myself. I would be
glad for any suggestions any of you have.
--
cheers
Ben Siemon
254 723 6937
cs.baylor.edu/~siemon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
useing ccd and that all makes sense I jus do not see
how to mount the thing created with ccd in a usefull way outside of
/home/newDisks.
--
cheers
Ben Siemon
cs.baylor.edu/~siemon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
gt; http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
>
--
cheers
Ben Siemon
254 723 6937
cs.baylor.edu/~siemon
___
freebsd-questions@freebsd.org mailing list
http://list
I have a situation where we are using a samba file server 3.0.23d with WINS
enabled on FreeBSD 5.4. When the WINS is enabled in Samba the user
(Windows) PCs are having problems resolving other PCs on the network (using
NetBIOS), example: pinging "user" from a user PC is resolving to "user.com"
an
been unable to find it for a week. So I figured I would go crying
for help.
--
cheers
Ben Siemon
cs.baylor.edu/~siemon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Is there anyone that can share with me thier custom kernel conf for vmware
5.5?
--
cheers
Ben Siemon
254 723 6937
cs.baylor.edu/~siemon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
mething? /usr/ports/UPDATING seems to be talking about
installed ports that complain at run time about missing libraries - that
isn't the problem here. The problem with libxine is that it won't compile in
the first place without libdpstk, so to
; is that it won't compile in the first place without libdpstk, so to
> > "reinstall" as advised is impossible.
>
> If you have ImageMagick or transcode installed, recompile that first.
Both of them - and your solution works perfectly, thanks very much!
Cheers,
Ben
insight into the whole problem would be very much
appreciated.
--
cheers
Ben Siemon
254 723 6937
cs.baylor.edu/~siemon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
e the best solution would be to let it use jdk15, but it doesn't seem
to want to play.
Good luck,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
openssl and installed openssl-beta until I'd
installed OO, then got rid of openssl-beta and reinstalled openssl! It worked
fine, although i don't know what the security inplications of that might be,
if any.
Cheers,
Ben
___
freebsd-questions@fre
uild from ports seems to require
this tcl at some point, so my first few days of FreeBSD are not going as
well as I hoped... after much documentation searching and googling etc,
I come to this point for help (at least on how to get more help)
cheers
Ben
On Friday 21 April 2006 00:31, Alex de Kruijff wrote:
> On Thu, Apr 20, 2006 at 10:17:47AM +0000, Ben Paley wrote:
> > Hello,
> >
> > I have Apache 2 running on FreeBSD 6.1-PRERELEASE on a laptop on a small
> > office lan. Whenever one of the other machines (mostly Macs
the problem?
Or maybe I've been cursed for having an operating system of which the logo is
a devil ;-)
> Try to ask directly on the freebsd-apache mailing list.
OK, I'll try that too, thanks for the tip.
Cheers,
Ben
___
freebsd-question
st idea what
to look for or what to check - I've never had any problems with it before.
Cheers,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Wednesday 26 April 2006 10:24, Nick Withers wrote:
> On Wed, 26 Apr 2006 10:08:58 +
>
> Ben Paley <[EMAIL PROTECTED]> wrote:
> > Could anyone give me a hint as to how to get started checking the
> > hardware? It's a Dell Inspiron 6000 laptop. I really don&#
k problem on the exact spot where this file is? is fsck my friend in
this instance? I'll go and rtfm right now...
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
00% 0 -
Any more ideas?
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
'm inclined to look
for the problem in something about the file. That's why I mentioned the long
complicated journey it's been on in my first message - osx, freebsd, winnt,
solaris and back again via ethernet, wireless, usb flash, ftp...
Running out of idea
read the attached
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
uhid0: Western Digital External HDD, rev 2.00/6.02, addr 2, iclass 8/6
Thanks in advance for any suggestions.
Ben House
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Yes, I am using a GENERIC kernel with the related scsi modules.
Ben House
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andrew
Pantyukhin
Sent: Saturday, June 24, 2006 1:03 AM
To: Ben House
Cc: freebsd-questions@freebsd.org
Subject: Re: USB External
ind the library `'
(That's the whole line, it really does end with a back-tick and a single
quote).
I don't know where to begin with this since google has let me down, so I'd
really appreciate some help!
Cheers,
Ben
___
freebsd-ques
ber/src.
*** Error code 1
Stop in /root/kftpgrabber-0.8.0-alpha2/kftpgrabber.
*** Error code 1
Stop in /root/kftpgrabber-0.8.0-alpha2.
*** Error code 1
Stop in /root/kftpgrabber-0.8.0-alpha2.
[EMAIL PROTECTED]
There's more, of course, but that's how it ends. Has anyone got a cl
Thanks in advance for any help you can provide... On reply please cc my email
address.
http://www.bsdforums.org/forums/showthread.php?t=45514 [HISTORY]
http://lists.freebsd.org/pipermail/...rch/003877.html [Related Link]
I am trying to get Skype or Vonage softphone(via wine) working on my
isks). How do I tell the kernel to load a suspend-to-disk image rather
than booting?
I'm using the july snapshot of 6-CURRENT on a Thinkpad T43p.
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Fabian Keil <[EMAIL PROTECTED]> writes:
> Ben Jencks <[EMAIL PROTECTED]> wrote:
>
>> I'm trying to get suspend-to-disk (S4OS) working. (S3 doesn't work, but
>> I'll worry about that later). When I r
0 23 * * 3 /usr/local/sbin/expire_mail -l -M -a 60 /var/mail/*
Here you use expire_mail (no .pl)
Is this the problem?
- --
Ben
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.1 (FreeBSD)
iD8DBQFC03Hwpt3yYclAKVsRAnmPAJ0Sy0bKLgazEQSwPgA6J9Q23ClNhQCghuZn
9Cfxlz9jHx59JK2VL4h+qTY=
=
screen session with one keyboard/OS/keymap/method of connection,
and attempt to use it from another, it screws up the "special" keys.
- --
Ben
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.1 (FreeBSD)
iD8DBQFC1rWypt3yYclAKVsRAoApAJwMQ25E500MVlHeisT54TGY2dMvFgCfZNYo
WCJprkJoyags
reeBSD includes PF, which supports this.
http://www.openbsd.org/faq/pf/pools.html
You need to NAT to an address pool, with round-robin.
- --
Ben
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.1 (FreeBSD)
iD8DBQFC14TUpt3yYclAKVsRArs/AKCT6FmcsD8Y61uEpWEUFZfTsPx0XgCdGG75
KyXDfTEO
dev/da0s1. You have to
create a devfs ruleset in /etc/devfs.rules. Then you have to activate it
with the rc.conf knob devfs_system_ruleset. See devfs.rules(5) and
/etc/defaults/devfs.rules.
- --
Ben
-BEGIN PGP SIGNATURE-
Version:
tostart="YES"
Any suggestions as to how to sort this would be greatly appreciated.
Regards,
Ben Craig.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
plicant start ath0 and get the right
behavior. Is there a way to get wpa_supplicant to start on boot, and
only start dhclient as a result of the link-state event, not directly
during boot?
- --
Ben
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.1 (FreeBSD)
iD8DBQFC5rs1pt3yYc
"snd_via82c686"
device snd_vibes
#device "snd_vortex1"
device snd_uaudio
I'm sure I don't need all this stuff in there, but I haven't got round to
experimenting with what I can take out. Could that be my problem?
Thanks in anticipa
On Tuesday 02 August 2005 14:59, Lowell Gilbert wrote:
> Ben Paley <[EMAIL PROTECTED]> writes:
> > I guess I need to enable midi in the kernel, but what device / options?
>
> I'm not sure that MIDI is supported by the kernel these days.
> Does anyone know for sur
the card
are:
10661AS723YF
IBM Modem FRU: 04K0054
Googling these didn't reveal anything terribly helpful, though it
implied that this chipset was actually a winmodem, which would be
surprising.
Thanks
Ben Kaduk
___
freebsd-questions@freebsd.org mailing
Hello,
Anyone got any idea how I can access the built-in sd card reader on my dell
inspiron 6000 laptop? There's no /dev/sda at the moment. I can't seem to find
out how the card connects internally - neither usb nor scsi look very
likely...
Any more ideas?
C
On Monday 05 September 2005 11:04, Roland Smith wrote:
> On Mon, Sep 05, 2005 at 10:36:40AM +0100, Ben Paley wrote:
> > Anyone got any idea how I can access the built-in sd card reader on my
> > dell inspiron 6000 laptop?
>
> Is there anything in /var/log/messages?
Not so far
how far his efforts have
> come, and who the FreeBSD kernel developer is who is working on this.
Thanks a lot for your advice - I shall follow it, even if it is slightly
dispiriting. Perhaps I should learn C properly and start writing some
drivers... :-)
Cheers,
Ben
___
...PS -
Thanks not just for your advice, but for putting in the effort to find this
stuff out - I wouldn't have known where to start!
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/fr
th something
simpler.
> If you are serious about writing a driver, I would recommend reading
> "The Design and Implementation of the FreeBSD Operating System" by
> McKusick and Neville-Neil.
Good advice, once again! Thanks very much.
Cheers,
Ben
__
Hi,
Where can I find information on writing device driver for PCI-express
hardware on FreeBSD?
Regards
Ben
Ultra Electronics
Sonar and Communications Systems
Birdport Road
Greenford
Middlesex
UB6 8UA
England
Direct Line +44 (0)20 8813 4534
Switch Board +44 (0)20 8813
298649932 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 3909MB at ata0-master UDMA33
pccard0: (manufacturer=0x01bf, product=0x3302,
function_type=6) at function 0
pccard0:CIS info: Belkin, 11Mbps-Wireless-Notebook-Network-Adapter
acd0: DVDROM at ata1-master PIO4
Trying to mount root from
Hi all,
I'm trying to mount a fat32 drive with the permissions so the right
users (in the group "mine") can read & write to it.
[EMAIL PROTECTED] /mnt]# l
total 8
drwxrwxrwx 19 ben mine 4.0K Jan 1 13:21 downloads/
drwxrwxr-x 2 ben mine 512B Jan 1 17:31 drive/
I am trying to install Mercurial on FreeBSD in order to install Go
(programming language). I am running into a problem with Mercurial
which looks like this:
$ hg pull
abort: could not import module thread!
Exception AttributeError: "'httpsrepository' object has no attribute
'urlopener'" in > ignor
On Tue, Dec 15, 2009 at 7:52 PM, Emil Smolenski wrote:
> On Tue, 15 Dec 2009 05:36:55 +0100, Ben Schumacher
> wrote:
>
>> At any rate, I've been considering switching this to a ZFS RAIDZ now
>> that FreeBSD 8 is released and it seems that folks think it's stabl
ilities of ZFS, but I can probably just
dedicate a large chunk of storage to the ZVOL.
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
fetch -p ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/bash/FAQ
There's also an environment variable (FTP_PASSIVE_MODE) that you can
set to default to passive FTP. See fetch(3), but basically set it to
anything besides "no" to set the default.
Cheers,
Ben
___
since the labels write through and apparently can
get detected from the devices before the mirror is loaded? Or is this
a bug that I should file a pr for?
Thanks for your attention.
Cheers,
Ben
___
freebsd-questions@freebsd.org mailing list
http://list
201 - 300 of 341 matches
Mail list logo
