100318 Daniel Pielmeier wrote:
>> hpcups
> Is the new printer driver which replaces the hpijs driver.
>> hpijs
> See above.
Well, I replaced 'hpijs' with 'hpcups' & my printer wouldn't work,
so I restored 'hpijs' & dropped 'hpcups' & all was ok.
It's an ancient Deskjet 500C with the b+w '500' driv
On 19 March 2010 08:42, Mick wrote:
> Is there some bash incantation I can use then with OOo compiled from source,
> to keep the terminal open until I close OOo?
I guess something like this might do the trick:
while pgrep ooffice >/dev/null; do sleep 1; done
Although I'm not at my Gentoo box
=== On Thu, 03/18, Carlos Hendson wrote: ===
> I've experienced intermittent software RAID errors like those found in
> the "softraid-fail.txt" attachment.
===
That's most likely your disk starting to fail.
-- Keith Dart
--
--
Hi at all,
I'm trying to setup VPN on my Laptop but I'm stuck. When I'm at the
university I have to connect to their WLAN and then setting up a
VPN-Connection. All packets should take the VPN-tunnel. Here's what I've
got so far:
1) W-LAN connection works and I get an ip, default route and DNS-Ser
On Thu, Mar 18, 2010 at 2:45 PM, Carlos Hendson wrote:
> Hello,
>
> I've got a Dell Inspiron 1720 laptop with dual 2.5" hard drives setup
> using software RAID1. I've had this computer for about a year and half
> and all's been working well.
>
> I've experienced intermittent software RAID errors
Hello,
I've got a Dell Inspiron 1720 laptop with dual 2.5" hard drives setup
using software RAID1. I've had this computer for about a year and half
and all's been working well.
I've experienced intermittent software RAID errors like those found in
the "softraid-fail.txt" attachment.
Initially I
Am 13.03.2010 19:25, schrieb Stefan G. Weichinger:
>> If you are on linux soft raid you might check your disks for errors
>> with smartmontools. Other than that the only thing I can think of is
>> something like a performance regression in the ide/scsi/sata
>> controller (on host or virtual) or m
On 3/18/2010 3:55 PM, Dale wrote:
> I think avahi is a KDE thing. I don't really know what zeroconf is. If
> I recall correctly, some package said it had to have that so I turned it
> on. No clue what it is even after looking up the definition with euse.
> May as well be Greek. ;-)
Zeroconf
James schrieb am 18.03.2010 14:37:
> So I cannot find an explicit listing for this new model HP printer:
> "OfficeJet Pro 8500"; so I'm using this driver:
> HP OfficeJet Pro 1150C.
According to http://hplipopensource.com/hplip-web/supported_devices/index.html
your printer is supported sine hplip
On Thursday 18 March 2010 19:55:14 Dale wrote:
> James wrote:
> > Dale gmail.com> writes:
> >> [ebuild R ] net-print/cups-1.3.11-r1 USE="X acl avahi dbus gnutls
> >> java jpeg ldap pam perl png ppds python ssl tiff zeroconf -kerberos -php
> >> -samba -slp -static -xinetd" LINGUAS="en -de -es
On Thursday 18 March 2010 21:55:14 Dale wrote:
> James wrote:
> > Dale gmail.com> writes:
> >> [ebuild R ] net-print/cups-1.3.11-r1 USE="X acl avahi dbus gnutls
> >> java jpeg ldap pam perl png ppds python ssl tiff zeroconf -kerberos -php
> >> -samba -slp -static -xinetd" LINGUAS="en -de -es
On Thursday 18 March 2010 14:07:37 Renat Golubchyk wrote:
> Hi!
>
> On Wed, 17 Mar 2010 23:19:34 + Mick
>
> wrote:
> > In an aterm I launch top. Then press z c and Shift+W. I get:
> >
> >Wrote configuration to '/home/michael/.toprc'
> >
> > Fine I think, Ctrl+c to end it and move on.
James wrote:
Dale gmail.com> writes:
[ebuild R ] net-print/cups-1.3.11-r1 USE="X acl avahi dbus gnutls
java jpeg ldap pam perl png ppds python ssl tiff zeroconf -kerberos -php
-samba -slp -static -xinetd" LINGUAS="en -de -es -et -fr -he -id -it -ja
-pl -sv -zh_TW" 0 kB
I co
Neil Bothwick wrote:
On Thu, 18 Mar 2010 17:50:14 + (UTC), James wrote:
So hplip and cups work together? I thought is was one
or the other?
hplip is a set of drivers, for use by CUPS and other programs.
I think Neil is correct. I have both. I don't know if it will work
On Thursday 18 March 2010 03:29:00 Dan Wallis wrote:
> On 16 March 2010 12:41, Mick wrote:
> > On a x86 system, oocalc launches, I use the file and when I close it
> > shred removes it. On the amd64 system, the file is shredded as soon as
> > it is opened. This is what happens:
>
> I get somet
On Thu, 18 Mar 2010 17:50:14 + (UTC), James wrote:
> So hplip and cups work together? I thought is was one
> or the other?
hplip is a set of drivers, for use by CUPS and other programs.
--
Neil Bothwick
Programmer (n): A red-eyed, mumbling mammal capable of conversing
with inanimate objec
Dale gmail.com> writes:
> [ebuild R ] net-print/cups-1.3.11-r1 USE="X acl avahi dbus gnutls
> java jpeg ldap pam perl png ppds python ssl tiff zeroconf -kerberos -php
> -samba -slp -static -xinetd" LINGUAS="en -de -es -et -fr -he -id -it -ja
> -pl -sv -zh_TW" 0 kB
I could not help but
Dale gmail.com> writes:
> I think ppds and hpcups is the key ones. I would at least start with
> those.
So hplip and cups work together? I thought is was one
or the other?
You use the hpcups flag and not the new-hpcups flag?
James
Am Donnerstag 18 März 2010 schrieb walt:
> On 03/17/2010 05:29 PM, Iain Buchanan wrote:
> > ...That's why we have programming languages, because English is too
> > forgiving and fuzzy!
>
> By George, I think you've got it. From now on, all political campaign
> speeches should be written in C. We
Am 17.03.2010 22:00, schrieb Neil Bothwick:
> On Wed, 17 Mar 2010 21:44:34 +0100, Florian Philipp wrote:
>
>> Just for clarification: Is it really necessary to unplug the broken disk
>> for this to work?
>> If read access fails on sda and the BIOS tries sdb, would this also
>> work? Isn't grub's h
James wrote:
James tampabay.rr.com> writes:
Maybe some printer wiz will figure out how to just
edit the /etc/cups/printers.conf file directly
Well, I hate to keep answering my own posts
surely one of the more astute admins will jump in?
(and keep me from looking.fooli
Am Donnerstag 18 März 2010 schrieb Arnau Bria:
> Hi all,
>
> I'm trying to add some sub to a video with menconder (following a
> receipt).
>
> I run something like:
>
> mencoder mi_video.avi -oac pcm -ovc lavc -lavcopts
> vcodec=xvid:mbd=2:trell:autoaspect -sub mis_subs.srt -subfont-text-scale 3
James tampabay.rr.com> writes:
> Maybe some printer wiz will figure out how to just
> edit the /etc/cups/printers.conf file directly
Well, I hate to keep answering my own posts
surely one of the more astute admins will jump in?
(and keep me from looking.foolish?)
So continuing to
Dale gmail.com> writes:
> http://opensolaris.org/jive/message.jspa?messageID=400875#400875
> About the third one down. Maybe that will help.
The best driver I have found, is the
HP OfficeJet Pro 1150C Foomatic/cdj550 (color).
It works fine except no duplex printing.
Maybe some printer
Dale gmail.com> writes:
> http://opensolaris.org/jive/message.jspa?messageID=400875#400875
I tried those drivers:
6450 and the clj2605 and it made matters worse.
Any other ideas?
Maybe I need to start hacking the /etc/cups/printers.conf
file?
thanks,
James
On Thu, 18 Mar 2010 14:54:12 +0100
Norman Rieß wrote:
> Um...it is not the exact command you should use in your case with the
> subs, it is an example on how to bypass the lavc problem.
> Producing a working command, that suits _your_ needs is still your
> job ;-).
Oh! thanks, going to see into
Hi!
On Wed, 17 Mar 2010 23:19:34 + Mick
wrote:
> In an aterm I launch top. Then press z c and Shift+W. I get:
>
>Wrote configuration to '/home/michael/.toprc'
>
> Fine I think, Ctrl+c to end it and move on. Next time I fire up top,
> even from the same terminal, it's all looking
Am 03/18/10 13:14, schrieb Arnau Bria:
On Thu, 18 Mar 2010 12:38:01 +0100
Norman Rieß wrote:
Hello,
Hi Norman,
i allways had problems with lavc so i used xvid in mplayer directly:
mencoder sourcefile -ovc xvid -xvidencopts bitrate=vbitrate -oac
mp3lame -lameopts abr:br=abitrat
James wrote:
Hello,
I've successfully set up many printers, using cups and HPLIP
before. I prefer to use CUPS.
So I cannot find an explicit listing for this new model HP printer:
"OfficeJet Pro 8500"; so I'm using this driver:
HP OfficeJet Pro 1150C.
Everything works, admin from localhost:63
Hello,
I've successfully set up many printers, using cups and HPLIP
before. I prefer to use CUPS.
So I cannot find an explicit listing for this new model HP printer:
"OfficeJet Pro 8500"; so I'm using this driver:
HP OfficeJet Pro 1150C.
Everything works, admin from localhost:631 for CUPS;
HP
On Thu, 18 Mar 2010 13:06:20 +0100, Alex Schuster wrote:
> I tried with sys-process/procps-3.2.7, sys-process/procps-3.2.8 and sys-
> process/procps-3.2.8-r1 (all x86), all without the problem.
I had a similar problem in that I could save changes as a user but not
when logged in as root. In that
On Thu, 18 Mar 2010 12:38:01 +0100
Norman Rieß wrote:
> Hello,
Hi Norman,
> i allways had problems with lavc so i used xvid in mplayer directly:
> mencoder sourcefile -ovc xvid -xvidencopts bitrate=vbitrate -oac
> mp3lame -lameopts abr:br=abitrate -o result_path
I don't get it source file
o0o.atlantis@gmail.com writes:
> Same thing here, nothing was highlighted and my .toprc looked like
> yours I added Def, Job, Mem and usr in the file and it's fine now.
> The question is why is the file not having the right syntax?
> here:
> top: procps version 3.2.8 on amd64
I tried with sy
Am 03/18/10 12:20, schrieb Arnau Bria:
Hi all,
I'm trying to add some sub to a video with menconder (following a
receipt).
I run something like:
mencoder mi_video.avi -oac pcm -ovc lavc -lavcopts
vcodec=xvid:mbd=2:trell:autoaspect -sub mis_subs.srt -subfont-text-scale 3 -o
video_final.avi
b
Le Thursday 18 Mar 2010 à 12:06:12 (+0100), Alex Schuster a écrit :
> Mick writes:
>
> > In an aterm I launch top. Then press z c and Shift+W. I get:
> >
> >Wrote configuration to '/home/michael/.toprc'
>
> Cool. Didn't know about this yet.
>
> > Fine I think, Ctrl+c to end it and move on
Hi all,
I'm trying to add some sub to a video with menconder (following a
receipt).
I run something like:
mencoder mi_video.avi -oac pcm -ovc lavc -lavcopts
vcodec=xvid:mbd=2:trell:autoaspect -sub mis_subs.srt -subfont-text-scale 3 -o
video_final.avi
but I get the error:
[...]
Selected audio
Mick writes:
> In an aterm I launch top. Then press z c and Shift+W. I get:
>
>Wrote configuration to '/home/michael/.toprc'
Cool. Didn't know about this yet.
> Fine I think, Ctrl+c to end it and move on. Next time I fire up top,
> even from the same terminal, it's all looking white with
On Wed, Mar 17, 2010 at 06:57:59PM -0700, walt wrote:
> On 03/17/2010 05:29 PM, Iain Buchanan wrote:
>
> >...That's why we have programming languages, because English is too
> >forgiving and fuzzy!
>
> By George, I think you've got it. From now on, all political campaign
> speeches should be wri
stosss wrote:
On Wednesday, March 17, 2010, Frank Steinmetzger wrote:
Am Mittwoch 17 März 2010 schrieb Dale:
I only want plain text to the mailing lists and html for everyone else. I
send pics and other things to other folks.
Ya don’t need HTML for that. ;-)
I have even s
39 matches
Mail list logo