I was thinking.. Its not NCP (not loaded yet) so its not way you code
the NCP yet; its important to match the following in the NCP with the
number of the channel adapter you are using its also import to know
if you are using the Phisycal number or logical number.
the above is in the VTAM/NCP book
yes 201 413 8952 anthony
-
The information contained in this electronic mail message, and any and all
accompanying documents, constitutes confidential information. If you are
not the intended recipient of this information, any disclosure, copying,
distribut
if you want you can call me offline..anthony 2014138952.. i just did what
you are doing (3745 converter channel byte and block)
-
The information contained in this electronic mail message, and any and all
accompanying documents, constitutes confidential in
Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Ali Serdar Yakut
Sent: Friday, November 11, 2005 10:23 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: Fwd: 3745 , Does anybody remember?
No paths physically available message is given when I try to online
unconditionally.
3745 is connected throug
Since you are trying to vary 0820 online, the correct setting at the MOSS
console for the NSC or ESC address would be 20. In nearly all cases I ever ran
across the default settings for the other parameters were correct, or at least
would be close enough that the 3745 could be brought online and
Ali,
>From what I'm seeing here it look like the 3745 doesn't have the
subchannel address set properly. This is the last two bytes of the device
address (i.e. XXUU). From one of the 3745 configuration screens (Its been
a while and I can't remember which), you need to set the unit address fo
On Fri, 11 Nov 2005 17:22:47 +0200, Ali Serdar Yakut
<[EMAIL PROTECTED]> wrote:
>No paths physically available message is given when I try to online
>unconditionally.
> 3745 is connected through parallel cable - optica - escon channel.
> When I check the MOSS conssole there are parameters to be se
No paths physically available message is given when I try to online
unconditionally.
3745 is connected through parallel cable - optica - escon channel.
When I check the MOSS conssole there are parameters to be set -
Adapter Type: CADS/BCCA
NSC or ESC address
Channel Burst Length
Data Transfer Mod
One other thing to try is this VARY command; V 0820,ONLINE,UNCOND
which will bring it online for your system to use. Other than that, is
the CHP a block or escon?
HTH,
Claude
>>> [EMAIL PROTECTED] 11/11/05 9:53 AM >>>
-- Forwarded message --
From: Ali Serdar Yakut <[EMAIL PROTECTE
-- Forwarded message --
From: Ali Serdar Yakut <[EMAIL PROTECTED]>
Date: Nov 11, 2005 3:55 PM
Subject: Re: 3745 , Does anybody remember?
To: IBM-MAIN@bama.ua.edu
Hi,
I can not take the device online...
Although channel seems to be online,
As the path is not validated and can not
10 matches
Mail list logo