++
> 1 file changed, 2 insertions(+)
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Thu, Jan 14, 2021 at 11:07:30AM -0800, Saravana Kannan wrote:
> On Thu, Jan 14, 2021 at 11:03 AM Marek Szyprowski
> wrote:
> >
> > Hi Saravana,
> >
> > On 13.01.2021 21:27, Saravana Kannan wrote:
> > > On Wed, Jan 13, 2021 at 3:03 AM Marek Szyprowski
> > > wrote:
> > >> When Exynos power
On Wed, Jan 13, 2021 at 03:34:42PM +0100, Adrien Grassein wrote:
> Tested with a basic Build Root configuration booting from sdcard.
>
> Signed-off-by: Adrien Grassein
> ---
> arch/arm64/boot/dts/freescale/Makefile| 1 +
> .../dts/freescale/imx8mm-nitrogen8mm_rev2.dts | 364
On Wed, Jan 13, 2021 at 03:34:41PM +0100, Adrien Grassein wrote:
> The Nitrogen8M Mini is an ARM based single board computer (SBC).
>
> Signed-off-by: Adrien Grassein
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
R
be a problem if the external RTC isn't rtc0.
>
> Make the alias for rtc0 point to the external RTC all the time and
> rtc1 point to the SVNS in order to correctly hold date/time over
> a power-cycle.
>
> Signed-off-by: Adam Ford
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Sun, Jan 10, 2021 at 05:38:26AM -0600, Adam Ford wrote:
> The WiFi chip is capable of communication at SDR104 speeds.
> Enable 100Mhz and 200MHz pinmux to support this.
>
> Signed-off-by: Adam Ford
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Mon, Jan 11, 2021 at 03:57:16PM -0800, Danny Lin wrote:
> This energy model enables the use of energy- and capacity-aware CPU
> frequency scaling.
>
> Power and performance measurements were made using my freqbench [1]
> benchmark coordinator, which uses EEMBC CoreMark [2] as the workload
>
>
The bindings go before DTS change using them.
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
tml
>
> Signed-off-by: Martin Kepplinger
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
/imx8mq-librem5.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
1 file changed, 1 insertion(+)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Tue, Jan 12, 2021 at 11:25:25AM +, Guillaume Tucker wrote:
> Hi Vincent,
>
> Please see the bisection report below about a boot failure on
> rk3328-rock64 with the pwmg/integ branch.
>
> Reports aren't automatically sent to the public while we're
> trialing new bisection features on
On Mon, Jan 11, 2021 at 03:11:24PM +0100, Bartosz Golaszewski wrote:
> On Mon, Jan 11, 2021 at 2:35 PM Krzysztof Kozlowski wrote:
> >
> > On Mon, Jan 11, 2021 at 01:40:26PM +0100, Bartosz Golaszewski wrote:
> > > From: Bartosz Golaszewski
> > >
> > > T
> ---
> drivers/rtc/rtc-s5m.c | 31 +++
> 1 file changed, 7 insertions(+), 24 deletions(-)
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Mon, Jan 11, 2021 at 01:40:26PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski
>
> This function can fail if regmap operations fail so check its return
> value in probe().
>
> Signed-off-by: Bartosz Golaszewski
> ---
> drivers/rtc/rtc-s5m.c | 2 ++
> 1 file changed, 2
t; ---
> drivers/rtc/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
Fixes: 959df7778bbd ("rtc: Enable compile testing for Maxim and Samsung
drivers")
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Tue, 5 Jan 2021 18:44:40 +0100, Krzysztof Kozlowski wrote:
> After converting to builtin driver, the probe function should not call
> __init functions anymore:
>
> >> WARNING: modpost: vmlinux.o(.text+0x8884d4):
> Section mismatch in reference from the functio
l test robot
Fixes: 352bfbb3e023 ("soc: samsung: exynos-chipid: convert to driver and merge
exynos-asv")
Signed-off-by: Krzysztof Kozlowski
---
drivers/soc/samsung/exynos-chipid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/samsung/exynos-chipid.
On Thu, Dec 17, 2020 at 09:05:50PM +0300, Dmitry Osipenko wrote:
> Introduce core voltage scaling for NVIDIA Tegra20/30 SoCs, which reduces
> power consumption and heating of the Tegra chips. Tegra SoC has multiple
> hardware units which belong to a core power domain of the SoC and share
> the
On Sat, Jan 02, 2021 at 05:54:10AM -0600, Adam Ford wrote:
> The Renesas RPC-IF is present on the RZ/G2 Series. Add that to
> the description.
>
> Suggested-by: Biju Das
> Signed-off-by: Adam Ford
> ---
> drivers/memory/Kconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
On Sat, Jan 02, 2021 at 05:54:09AM -0600, Adam Ford wrote:
> The RZ/G2 Series has the RPC-IF interface.
> Update bindings to support: r8a774a1, r8a774b1, r8a774c0, and r8a774e1
>
> Signed-off-by: Adam Ford
> ---
> .../bindings/memory-controllers/renesas,rpc-if.yaml | 6 +-
> 1 file
On Mon, Dec 28, 2020 at 06:49:18PM +0300, Dmitry Osipenko wrote:
> Now Internal and External memory controllers are memory interconnection
> providers. This allows us to use interconnect API for tuning of memory
> configuration. EMC driver now supports OPPs and DVFS.
>
> Tested-by: Nicolas
On Mon, Dec 28, 2020 at 06:49:17PM +0300, Dmitry Osipenko wrote:
> EMC driver will become mandatory after turning it into interconnect
> provider because interconnect users, like display controller driver, will
> fail to probe using newer device-trees that have interconnect properties.
> Thus make
On Mon, Dec 28, 2020 at 06:49:16PM +0300, Dmitry Osipenko wrote:
> Add modularization support to the Tegra124 EMC driver, which now can be
> compiled as a loadable kernel module.
>
> Note that EMC clock must be registered at clk-init time, otherwise PLLM
> will be disabled as unused clock at boot
On Mon, Jan 04, 2021 at 09:24:49PM +, Mark Brown wrote:
> On Mon, Jan 04, 2021 at 07:38:21PM +0100, Krzysztof Kozlowski wrote:
> > On Mon, Jan 04, 2021 at 06:27:34PM +, Mark Brown wrote:
>
> > > We can indicate the presence of features without adding new compatible
On Tue, Jan 05, 2021 at 02:44:24PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski
>
> Use the managed variant of i2c_new_dummy_device() to shrink code and
> remove the goto label.
>
> Signed-off-by: Bartosz Golaszewski
> ---
> drivers/rtc/rtc-s5m.c | 24
On Mon, Jan 04, 2021 at 06:27:34PM +, Mark Brown wrote:
> On Mon, Jan 04, 2021 at 07:18:25PM +0100, Krzysztof Kozlowski wrote:
> > On Mon, Jan 04, 2021 at 01:51:56PM +, Mark Brown wrote:
>
> > > > +- charger: Node for configuring the charger driver.
> &
On Mon, Jan 04, 2021 at 01:51:56PM +, Mark Brown wrote:
> On Wed, Dec 30, 2020 at 08:52:07PM +, Timon Baetz wrote:
>
> > +- charger: Node for configuring the charger driver.
> > + Required properties:
> > + - compatible: "maxim,max8997-battery"
> > + Optional properties:
> > + -
On Sun, Jan 03, 2021 at 03:54:15AM +, Yangtao Li wrote:
> Use devm_pm_opp_* API to simplify code.
>
> Signed-off-by: Yangtao Li
> ---
> drivers/memory/tegra/tegra30-emc.c | 29 +
> 1 file changed, 9 insertions(+), 20 deletions(-)
Reviewed-by: K
On Fri, Jan 01, 2021 at 04:55:00PM +, Yangtao Li wrote:
> Use devm_pm_opp_* API to simplify code.
>
> Signed-off-by: Yangtao Li
> ---
> drivers/memory/tegra/tegra20-emc.c | 29 +
> 1 file changed, 9 insertions(+), 20 deletions(-)
>
R
On Fri, Jan 01, 2021 at 04:54:58PM +, Yangtao Li wrote:
> We can't always return -EINVAL, let's fix it.
>
> Signed-off-by: Yangtao Li
> ---
> drivers/memory/samsung/exynos5422-dmc.c | 10 +++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
Reviewed-by: Krzysztof
On Fri, Jan 01, 2021 at 04:54:59PM +, Yangtao Li wrote:
> Use devm_pm_opp_* API to simplify code.
>
> Signed-off-by: Yangtao Li
> ---
> drivers/memory/samsung/exynos5422-dmc.c | 21 +
> 1 file changed, 5 insertions(+), 16 deletions(-)
Reviewed-by: K
mar in commit log (s/controll/control
> s/comprised/consisting/)
> - removed underscore from remaining node names
> - removed blank line in hoggrp
> - removed unused assigned-clocks and assigned-clock-rates node from usdhc
> nodes
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Wed, Dec 30, 2020 at 09:58:43AM -0800, Tim Harvey wrote:
> The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development
> kits comprised of a GW700x SoM and a Baseboard. Future SoM's such
> as the GW701x will create additional combinations.
>
> The GW700x SoM contains:
> - i.MX 8M Mini
commit: bd96a89ca3fe874c98fe057cccb087603d76e5d4
Best regards,
--
Krzysztof Kozlowski
commit: 3803f461bd28c1c817281348509399778633e82f
Best regards,
--
Krzysztof Kozlowski
commit: 4a928b3b7c0f8a2ae382c3db3a78898877567786
Best regards,
--
Krzysztof Kozlowski
On Mon, Dec 07, 2020 at 08:05:15PM +0100, Krzysztof Kozlowski wrote:
> If regmap_read() fails, the product_id local variable will contain
> random value from the stack. Do not try to parse such value and fail
> the ASV driver probe.
>
> Fixes: 5ea428595cc5 ("soc: samsung:
On Mon, 7 Dec 2020 20:05:13 +0100, Krzysztof Kozlowski wrote:
> Changes since v1:
> 1. Drop patch "soc: samsung: exynos-chipid: initialize later - with
>arch_initcall" which is now superseded by convertin to a driver.
> 2. Include Marek's patch, just for the referenc
On Mon, Dec 07, 2020 at 08:05:14PM +0100, Krzysztof Kozlowski wrote:
> From: Marek Szyprowski
>
> Check if the SoC is really supported before gathering the needed
> resources. This fixes endless deferred probe on some SoCs other than
> Exynos5422 (like Exynos5410).
>
> Fixe
.
> Add missing include.
> Rename charger_data members.
> Disable regulator on regulator_set_current_limit() failure.
> Fix ret declaration.
> Remove unneeded variables.
> Don't dev_err() on deferral.
> Get regulator and extcon from DTS.
> Use dev
nitor
all external connectors")
Reported-by: kernel test robot
Signed-off-by: Krzysztof Kozlowski
---
include/linux/extcon.h | 23 +++
1 file changed, 23 insertions(+)
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index fd183fb9c20f..0c19010da77f 100644
---
On Thu, Dec 31, 2020 at 07:19:07AM +, Timon Baetz wrote:
> On Thu, 31 Dec 2020 07:22:22 +0800, kernel test robot wrote:
> > Hi Timon,
> >
> > Thank you for the patch! Yet something to improve:
> >
> > [auto build test ERROR on regulator/for-next]
> > [also build test ERROR on
On Mon, Dec 28, 2020 at 11:35:38AM +, Timon Baetz wrote:
> This allows the MAX8997 charger to set the current limit depending on
> the detected extcon charger type.
>
> Signed-off-by: Timon Baetz
> ---
> drivers/extcon/extcon-max8997.c | 4
> 1 file changed, 4 insertions(+)
It's
On Mon, Dec 28, 2020 at 11:36:02AM +, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
>
> Also enable and disable the
On Mon, Dec 28, 2020 at 04:21:17PM -0800, Tim Harvey wrote:
> The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development
> kits comprised of a GW700x SoM and a Baseboard. Future SoM's such
> as the GW701x will create additional combinations.
>
> The GW700x SoM contains:
> - i.MX 8M Mini
On Tue, Dec 29, 2020 at 08:00:44PM +0800, peng@nxp.com wrote:
> From: Peng Fan
>
> According to RM, there is a spba bus inside aips3 and aips1, add it.
This does not look like matching contents of commit.
Best regards,
Krzysztof
>
> Signed-off-by: Peng Fan
> ---
>
On Tue, Dec 29, 2020 at 06:26:41AM -0600, Adam Ford wrote:
> On Tue, Dec 29, 2020 at 6:15 AM wrote:
> >
> > From: Peng Fan
> >
> > According to RM, there is a spba bus inside aips3 and aips1, add it.
> >
> > Signed-off-by: Peng Fan
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 362
On Thu, 10 Dec 2020 22:28:55 +0100, Krzysztof Kozlowski wrote:
> The Samsung PMIC datasheets describe the interrupt line as active low
> with a requirement of acknowledge from the CPU. Without specifying the
> interrupt type in Devicetree, kernel might apply some fixed
> c
On Thu, 10 Dec 2020 22:18:58 +0100, Krzysztof Kozlowski wrote:
> The S3FWRN5 datasheet describe the interrupt line as rising edge. The
> current configuration as level high, could cause spurious interrupts.
Applied, thanks!
[1/1] arm64: dts: exynos: correct S3FWRN5 NFC interrupt trigger
Y operation, what caused the suspend failure. Fix this by learning
> the Exynos USB2 PHY driver about the Exynos5420 variant.
>
> [...]
Applied, thanks!
[2/2] ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible
commit: 75681980c4e3d89c55b5b8f20b8f4c1aace601be
Best regards,
--
Krzysztof Kozlowski
On Thu, Dec 10, 2020 at 10:25:19PM +0100, Krzysztof Kozlowski wrote:
> The Maxim fuel gauge datasheets describe the interrupt line as active
> low with a requirement of acknowledge from the CPU. The falling edge
> interrupt will mostly work but it's not correct.
>
> Fixes: e86
On Fri, Nov 20, 2020 at 12:07:44PM +0100, Marek Szyprowski wrote:
> Hi Krzysztof,
>
> On 20.11.2020 12:05, Krzysztof Kozlowski wrote:
> > On Fri, Nov 20, 2020 at 09:56:37AM +0100, Marek Szyprowski wrote:
> >> USB2.0 PHY in Exynos5420 differs from Exynos5250 variant a bit,
On Mon, Dec 28, 2020 at 11:02:40AM -0800, Tim Harvey wrote:
> > +
> > > + {
> > > + clock-frequency = <10>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <_i2c1>;
> > > + status = "okay";
> > > +
> > > + gsc: gsc@20 {
> >
> > Node name should describe class of a
On Fri, Dec 25, 2020 at 11:33:21AM +, Timon Baetz wrote:
> On Thu, 24 Dec 2020 15:00:38 +0100, Krzysztof Kozlowski wrote:
> > On Thu, Dec 24, 2020 at 02:37:06PM +0100, Krzysztof Kozlowski wrote:
> > > On Thu, Dec 24, 2020 at 01:13:02PM +, Timon Baetz wrote:
> > &g
On Mon, 28 Dec 2020 at 09:21, Jagan Teki wrote:
> > > #include "imx8mm.dtsi"
> > > #include "imx8mm-beacon-som.dtsi"
> > > #include "imx8mm-beacon-baseboard.dtsi"
> > >
> > > (SoC dtsi, SoM dtsi, Carrier board dtsi)
> > >
> > > > design which makes any sense. We do not create empty DTS files
_CLASS can only be a module
if ath9k driver is a module as well.
Reported-by: kernel test robot
Fixes: 72cdab808714 ("ath9k: Do not select MAC80211_LEDS by default")
Signed-off-by: Krzysztof Kozlowski
---
drivers/net/wireless/ath/ath9k/Kconfig| 18 --
drivers/ne
On Thu, Dec 24, 2020 at 02:37:06PM +0100, Krzysztof Kozlowski wrote:
> On Thu, Dec 24, 2020 at 01:13:02PM +, Timon Baetz wrote:
> > On Thu, 24 Dec 2020 10:55:59 +0100, Krzysztof Kozlowski wrote:
> > > > @@ -170,6 +237,28 @@ static int max8997_battery_probe(struct
> >
On Thu, Dec 24, 2020 at 01:13:02PM +, Timon Baetz wrote:
> On Thu, 24 Dec 2020 10:55:59 +0100, Krzysztof Kozlowski wrote:
> > On Wed, Dec 23, 2020 at 01:43:05PM +, Timon Baetz wrote:
> > > Register for extcon notification and set charging current depending on
> > &
On Wed, Dec 23, 2020 at 02:23:16PM -0800, Tim Harvey wrote:
> The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development
> kits comprised of a GW700x SoM and a Baseboard.
>
> The GW700x SoM contains:
> - IMX8MM SoC
> - LPDDR4 DRAM
> - eMMC FLASH
> - Gateworks System Controller
On Wed, Dec 23, 2020 at 02:23:16PM -0800, Tim Harvey wrote:
> The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development
> kits comprised of a GW700x SoM and a Baseboard.
>
> The GW700x SoM contains:
> - IMX8MM SoC
It's i.MX 8M Mini.
On Wed, Dec 23, 2020 at 02:23:15PM -0800, Tim Harvey wrote:
> Add bindings for the Gateworks Venice Development kit boards with
> IMX8MM System on Module.
>
> Signed-off-by: Tim Harvey
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff
On Thu, 24 Dec 2020 at 11:08, Jagan Teki wrote:
>
> On Thu, Dec 24, 2020 at 2:48 PM Krzysztof Kozlowski wrote:
> >
> > On Wed, 23 Dec 2020 at 13:07, Jagan Teki wrote:
> > >
> > > On Wed, Dec 23, 2020 at 5:29 PM Krzysztof Kozlowski
> > > wrote:
On Wed, Dec 23, 2020 at 01:43:05PM +, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
>
> Also enable and disable the
On Wed, Dec 23, 2020 at 01:42:43PM +, Timon Baetz wrote:
> Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
>
> Signed-off-by: Timon Baetz
I already acked this, why did you skip my tag?
Best regards,
Krzysztof
> ---
> .../bindings/regulator/max8997-regulator.txt
On Wed, 23 Dec 2020 at 13:07, Jagan Teki wrote:
>
> On Wed, Dec 23, 2020 at 5:29 PM Krzysztof Kozlowski wrote:
> >
> > On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote:
> > > Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> > >
On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core MX8M Mini is an EDIMM SoM
tions.
>
> .../dts/freescale/imx8mm-icore-mx8mm.dtsi | 232 ++
> 1 file changed, 232 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
this Carrier board for
> creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
>
> Add bindings for it.
>
> Signed-off-by: Jagan Teki
> ---
> Changes for v3:
> - add proper bindings
> Changes for v2:
> - updated commit message
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
dts: imx8mq: Move usdhc clocks assignment to
> board DT")
> Signed-off-by: Martin Kepplinger
> ---
> arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4
> 1 file changed, 4 insertions(+)
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
he Librem 5 phone")
> Signed-off-by: Martin Kepplinger
> ---
> arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 9 +
> 1 file changed, 9 insertions(+)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Wed, Dec 23, 2020 at 08:09:55AM +, Timon Baetz wrote:
> On Tue, 22 Dec 2020 09:40:04 +0100, Krzysztof Kozlowski wrote:
(...)
> > > .name = "max8997_pmic",
> > > .type = POWER_SUPPLY_TYPE_BATTERY,
> > > @@ -170,6 +237,33 @@
On Tue, Dec 22, 2020 at 09:25:40PM +0100, Krzysztof Kozlowski wrote:
> On Tue, 22 Dec 2020 at 19:28, Jagan Teki wrote:
> >
> > On Mon, Dec 21, 2020 at 8:17 PM Jagan Teki
> > wrote:
> > >
> > > On Mon, Dec 21, 2020 at 8:12 PM Krzysztof Kozlowski
>
On Tue, 22 Dec 2020 at 19:28, Jagan Teki wrote:
>
> On Mon, Dec 21, 2020 at 8:17 PM Jagan Teki wrote:
> >
> > On Mon, Dec 21, 2020 at 8:12 PM Krzysztof Kozlowski wrote:
> > >
> > > On Mon, Dec 21, 2020 at 08:09:47PM +0530, Jagan Teki wrote:
> > >
On Tue, Dec 22, 2020 at 02:20:55PM +0530, Jagan Teki wrote:
> On Tue, Dec 22, 2020 at 2:36 AM Krzysztof Kozlowski wrote:
> >
> > On Tue, Dec 22, 2020 at 01:03:07AM +0530, Jagan Teki wrote:
> > > On Mon, Dec 21, 2020 at 7:36 PM Krzysztof Kozlowski
> > > wrot
On Tue, Dec 22, 2020 at 07:31:40AM +, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
>
> Also enable and disable the
er.
>
> Signed-off-by: Timon Baetz
> ---
> drivers/mfd/max8997.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
tions(+)
>
Acked-by: Krzysztof Kozlowski
Best regards,
Krzysztof
sure it is right
> Changes for v2:
> - remove the subject prefix "LF-2571-1"
>
> .../bindings/soc/imx/imx8m-soc.yaml | 86 +++
> 1 file changed, 86 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Tue, Dec 22, 2020 at 01:03:07AM +0530, Jagan Teki wrote:
> On Mon, Dec 21, 2020 at 7:36 PM Krzysztof Kozlowski wrote:
> >
> > On Mon, Dec 21, 2020 at 05:01:51PM +0530, Jagan Teki wrote:
> > > Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitiv
On Mon, Dec 21, 2020 at 12:24:11PM -0800, John Stultz wrote:
> On Sat, Dec 19, 2020 at 3:06 AM Krzysztof Kozlowski wrote:
> > On Fri, Dec 18, 2020 at 09:11:42PM -0800, John Stultz wrote:
> > > On Wed, Nov 11, 2020 at 1:22 AM Serge Semin
> > > wrote:
> > >
On Mon, Dec 21, 2020 at 03:35:07PM +, Timon Baetz wrote:
> On Mon, 21 Dec 2020 15:16:27 +0100, Krzysztof Kozlowski wrote:
> > On Mon, Dec 21, 2020 at 09:53:15AM +, Timon Baetz wrote:
> > > Register for extcon notification and set charging current depending on
> > &
On Mon, Dec 21, 2020 at 08:09:47PM +0530, Jagan Teki wrote:
> On Mon, Dec 21, 2020 at 7:35 PM Krzysztof Kozlowski wrote:
> >
> > On Mon, Dec 21, 2020 at 07:29:22PM +0530, Jagan Teki wrote:
> > > On Mon, Dec 21, 2020 at 7:16 PM Krzysztof Kozlowski
> > > wrot
On Mon, Dec 21, 2020 at 09:53:41AM +, Timon Baetz wrote:
> Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
>
> Signed-off-by: Timon Baetz
> ---
> .../bindings/regulator/max8997-regulator.txt | 11 +++
> 1 file changed, 11 insertions(+)
I see you updated
On Mon, Dec 21, 2020 at 09:53:35AM +, Timon Baetz wrote:
> Value taken from Galaxy S2 vendor kernel [0] which always sets 200mA.
Subject: "Add", not "Added", as in Linux coding style.
>
> Also rearrange regulators based on definition in max8997.h.
>
> [0]
>
On Mon, Dec 21, 2020 at 09:53:28AM +, Timon Baetz wrote:
> muic node is only used for extcon consumers.
> charger node is used to specify muic and regulator.
>
> Signed-off-by: Timon Baetz
> ---
> arch/arm/boot/dts/exynos4210-i9100.dts | 10 ++
> 1 file changed, 10 insertions(+)
On Mon, Dec 21, 2020 at 09:53:22AM +, Timon Baetz wrote:
> Set CHARGER current and CHARGER_CV voltage according to Galaxy S2 vendor
> sources [0,1].
Mention that the vendor sources are for Galaxy S2 Epic 4G Touch SPH-D710
Android.
This seems to depend on driver changes, so it will have to
On Mon, Dec 21, 2020 at 09:53:15AM +, Timon Baetz wrote:
> Register for extcon notification and set charging current depending on
> the detected cable type. Current values are taken from vendor kernel,
> where most charger types end up setting 650mA [0].
>
> Also enable and disable the
On Mon, Dec 21, 2020 at 09:53:08AM +, Timon Baetz wrote:
> This allows the MAX8997 charger to set the current limit depending on
> the detected extcon charger type.
>
> Signed-off-by: Timon Baetz
Don't do this:
In-Reply-To: <20201202203516.43053-1-timon.ba...@protonmail.com>
It's a
On Mon, Dec 21, 2020 at 05:01:51PM +0530, Jagan Teki wrote:
> Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
> Evaluation Board.
>
> Genaral features:
> - LCD 7" C.Touch
> - microSD slot
> - Ethernet 1Gb
> - Wifi/BT
> - 2x LVDS Full HD interfaces
> - 3x USB 2.0
> - 1x USB 3.0
On Mon, Dec 21, 2020 at 07:29:22PM +0530, Jagan Teki wrote:
> On Mon, Dec 21, 2020 at 7:16 PM Krzysztof Kozlowski wrote:
> >
> > On Mon, Dec 21, 2020 at 05:01:47PM +0530, Jagan Teki wrote:
> > > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
On Mon, Dec 21, 2020 at 05:01:49PM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
>
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
>
> i.Core MX8M Mini is an EDIMM SoM
On Mon, Dec 21, 2020 at 05:01:48PM +0530, Jagan Teki wrote:
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini
> from Engicam.
>
> General features:
> - NXP i.MX8M Mini
> - Up to 2GB LDDR4
> - 8/16GB eMMC
> - Gigabit Ethernet
> - USB 2.0 Host/OTG
> - PCIe Gen2 interface
> - I2S
> - MIPI
On Mon, Dec 21, 2020 at 05:01:47PM +0530, Jagan Teki wrote:
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
>
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
>
> i.Core MX8M Mini needs to mount on top of this Carrier board for
igned-off-by: Jagan Teki
> ---
> Changes for v2:
> - updated commit message
>
> arch/arm64/configs/defconfig | 1 +
> 1 file changed, 1 insertion(+)
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
On Mon, Dec 21, 2020 at 03:10:52AM +, Alice Guo (OSS) wrote:
>
>
> > -Original Message-
> > From: Krzysztof Kozlowski
> > Sent: 2020年12月19日 20:17
> > To: Alice Guo (OSS)
> > Cc: robh...@kernel.org; shawn...@kernel.org; s.ha...@pengutronix.
On Mon, Dec 21, 2020 at 08:36:02AM +0100, Marek Szyprowski wrote:
> Hi Krzysztof,
>
> On 18.12.2020 15:22, Krzysztof Kozlowski wrote:
> > On Fri, Dec 18, 2020 at 02:25:39PM +0100, Marek Szyprowski wrote:
> >> On 10.12.2020 22:29, Krzysztof Kozlowski wrote:
> >>&
ale/imx8mq-librem5-devkit.dts | 4
> 1 file changed, 4 insertions(+)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
runtime suspend so
> let's revisit this at a later point.
>
> Signed-off-by: Guido Günther
> ---
> .../boot/dts/freescale/imx8mq-librem5-devkit.dts | 11 +++
> 1 file changed, 11 insertions(+)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
0 5
>
> Signed-off-by: Guido Günther
> ---
> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 5 -
> 1 file changed, 5 deletions(-)
>
Reviewed-by: Krzysztof Kozlowski
Best regards,
Krzysztof
601 - 700 of 16189 matches
Mail list logo
