On Wed, 2015-09-30 at 13:02 -0400, Josh Boyer wrote:
> Hi Johannes,
>
> We've seen a handful of reports that seem to have verbose output from
> the ieee80211_config_bw function in net/mac80211/mlme.c. It looks
> similar to this:
>
> [ 66.578652] wlp3s0: AP xx:xx:xx:xx:xx changed bandwidth,
On 09/30/2015 10:14 AM, Johannes Berg wrote:
On Wed, 2015-09-30 at 08:44 -0700, Ben Greear wrote:
Any idea how this could be done in the stack instead of the driver?
I don't see why it should be?
The problem is that this is a receiver-side issue, so even if I manage
to hack the ath10k
On Wed, 2015-09-30 at 19:24 +0200, Pavel Machek wrote:
> On Mon 2015-09-28 09:41:43, Johannes Berg wrote:
> > On Sat, 2015-09-26 at 12:24 +0200, Pavel Machek wrote:
> > >
> > > That would be equivalent to ping -Q, right? It does not seem to have
> > > any effect :-(. I'd expect at least local
On 09/30/2015 11:30 AM, Johannes Berg wrote:
On Wed, 2015-09-30 at 10:20 -0700, Ben Greear wrote:
Yes, it is a transmitter side problem, and A-MSDU on IBSS
is disabled by default in all ath10k firmware versions that I am aware of.
Right.
I was hoping there might be a way to allow A-MSDU +
* Pavel Machek [30.09.2015 19:27]:
> This should send the second ping to the priority queue based on -Q,
> but I don't see an effect against one access point and it seems to
> work somehow against second one. Good!
you still need to hack/tune minstrel, because a lot of magic
I've been asked to not post any ath10k CT firmware related info
to these lists. Not clear exactly what all I'm requested not to post
at this time, but until I get this resolved one way or another,
I at least won't post any firmware release notes.
For those that still want to be notified
On Wed, 2015-09-30 at 08:44 -0700, Ben Greear wrote:
>
> Any idea how this could be done in the stack instead of the driver?
I don't see why it should be?
> The problem is that this is a receiver-side issue, so even if I manage
> to hack the ath10k firmware or driver rx logic, it would not fix
On Mon 2015-09-28 09:41:43, Johannes Berg wrote:
> On Sat, 2015-09-26 at 12:24 +0200, Pavel Machek wrote:
> >
> > That would be equivalent to ping -Q, right? It does not seem to have
> > any effect :-(. I'd expect at least local machine to use shorter waits
> > for medium, and thus drop packets
On 2015-09-30 20:34, Ben Greear wrote:
> On 09/30/2015 11:30 AM, Johannes Berg wrote:
>> On Wed, 2015-09-30 at 10:20 -0700, Ben Greear wrote:
>>>
>>> Yes, it is a transmitter side problem, and A-MSDU on IBSS
>>> is disabled by default in all ath10k firmware versions that I am aware of.
>>
>>
>
> I'm not sure ratelimiting it would even work - it's not *that* high
> frequency? Not really sure though.
>
> I think we can do either, it's not such a terribly important message as
> far as I can tell.
>
Seems like Emmanuel would like to see the message stay in some form -
perhaps we
On Wed, 2015-09-30 at 10:20 -0700, Ben Greear wrote:
>
> Yes, it is a transmitter side problem, and A-MSDU on IBSS
> is disabled by default in all ath10k firmware versions that I am aware of.
Right.
> I was hoping there might be a way to allow A-MSDU + IBSS + ath10k
> to work in future kernels
* Ben Greear [30.09.2015 21:08]:
> I've been asked to not post any ath10k CT firmware related info
this makes me sad, because it is related.
whoever asked you, can she/he stand up and explain?
bye, bastian
--
To unsubscribe from this list: send the line "unsubscribe
On 26/09/2015 01:00, Ben Greear wrote:
> It seems that ath10k ar988X hardware has a bug where the BSSID
> for IBSS AMSDU frames is all zeros. The 'main' 636 ath10k firmware
> does not seem to use AMSDUs for IBSS, and when I enable it in my CT
> firmware, then I see the breakage. So, I suspect it
The kbuild test robot reports the following build error for
openrisc-allmodconfig.
>> drivers/staging/wilc1000/wilc_sdio.c:584:2: error: implicit
>> declaration of function 'memset'
The error occurs due to missing a standard header file as
so that three .c files are included it.
Signed-off-by:
On Fri, 2015-09-25 at 16:00 -0700, Ben Greear wrote:
> It seems that ath10k ar988X hardware has a bug where the BSSID
> for IBSS AMSDU frames is all zeros. The 'main' 636 ath10k firmware
> does not seem to use AMSDUs for IBSS, and when I enable it in my CT
> firmware, then I see the breakage.
On Thu, Sep 03, 2015 at 02:14:18PM -0700, Kees Cook wrote:
> [removed bounced email addresses]
>
> On Wed, Sep 2, 2015 at 2:37 PM, Luis R. Rodriguez wrote:
> > On Wed, Sep 02, 2015 at 01:54:43PM -0700, Kees Cook wrote:
> >> On Wed, Sep 2, 2015 at 11:46 AM, Luis R. Rodriguez
This patch renames strHostIfStaInactiveT to mac_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames strDelStaParam to del_sta_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
This patch renames strAddStaParam to add_sta_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
This patch renames struct set_beacon to beacon_attr to keep the naming
convention as scan_attr, connect_attr and channel_attr.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git
This patch renames strHostIfSetDrvHandler to drv to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
This patch renames strHostIfSetIP to ip_info to avoid CamelCase naming
convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git
This patch renames strPowerMgmtparam to pwr_mgmt_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames strEditStaParam to edit_sta_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
This patch removes struct timer_cb which is not used.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 15 ---
1 file changed, 15 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
On Wed, Sep 30, 2015 at 06:55:11PM +0900, Tony Cho wrote:
> This patch renames strHostIfRegisterFrame to reg_f to avoid CamelCase
> naming convention.
Could we go with "reg_frame"? f is very ambigous.
regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe
mwifiex_get_random_ba_threshold() uses a complex homegrown implementation
to generate a pseudo-random number from the current time as returned
from do_gettimeofday().
This currently requires two 32-bit divisions plus a couple of other
computations that are eventually discarded as only eight bits
The mac80211 code uses ktime_get_ts to measure the connected time.
As this uses monotonic time, it is y2038 safe on 32-bit systems,
but we still want to deprecate the use of 'timespec' because most
other users are broken.
This changes the code to use ktime_get_seconds() instead, which
avoids the
This patch renames strHostIFSetChan to channel_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
This patch removes struct del_beacon which is not necessary. This patch
also changes Handle_DelBeacon function by removing 2nd parameter, struct
del_beacon because it is not used inside.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 24
This patch renames strHostIFSetBeacon to beacon_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch removes struct get_channel from the driver because it is not
used anywhere.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 15 ---
1 file changed, 15 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
This patch renames strHostIFkeyAttr to key_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 100 +++---
1 file changed, 50 insertions(+), 50 deletions(-)
diff --git
This patch renames strHostIFCfgParamAttr to cfg_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames struct set_channel to channel_attr to keep the naming
convention such as scan_attr and connect_attr.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git
This patch renames strHostIfBASessionInfo to session_info to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git
Ugh... No. Just do this:
diff --git a/drivers/staging/wilc1000/wilc_msgqueue.c
b/drivers/staging/wilc1000/wilc_msgqueue.c
index 869736a..52d8f95 100644
--- a/drivers/staging/wilc1000/wilc_msgqueue.c
+++ b/drivers/staging/wilc1000/wilc_msgqueue.c
@@ -102,6 +102,8 @@ int
This patch renames strHostIFscanAttr to scan_info in order to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 30 +++---
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git
This patch renames strHostIFconnectAttr to con_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 32 +++
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git
This patch renames strRcvdNetworkInfo to net_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git
This patch renames strRcvdGnrlAsyncInfo to async_info to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git
This patch renames strHostIfRegisterFrame to reg_f to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git
This patch renames strHostIfSetMulti to multicast_info to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames strHostIfSetOperationMode to mode to avoid CamelCase
naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames strHostIfRemainOnChan to remain_on_ch to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 24
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git
This patch renames strHostIfSetMacAddress to set_mac_info to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames strHostIfGetMacAddress to get_mac_info to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
From: Leo Kim
This patch fix kernel fail after ifconfig wlan0 up.
- if normal operation, kfree functions don't execute.
Signed-off-by: Leo Kim
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/wilc_msgqueue.c | 16 ++--
This patch renames strHostIFDelAllSta to del_all_sta_info to avoid
CamelCase naming convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
This patch renames pUserData to data to avoid CamelCase naming
convention.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/host_interface.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/wilc1000/host_interface.c
The mwifiex_11n_aggregate_pkt() function creates a ktime_t from
a timeval returned by do_gettimeofday, which is slow and causes
an overflow in 2038 on 32-bit architectures.
This solves both problems by using the appropriate ktime_get_real()
function.
Signed-off-by: Arnd Bergmann
On Wed, Sep 30, 2015 at 05:52:14PM +0900, Chaehyun Lim wrote:
> The kbuild test robot reports the following build error for
> openrisc-allmodconfig.
>
> >> drivers/staging/wilc1000/wilc_sdio.c:584:2: error: implicit
> >> declaration of function 'memset'
>
> The error occurs due to missing a
On Wed, Sep 30, 2015 at 7:20 PM, Greg KH wrote:
> On Wed, Sep 30, 2015 at 05:52:14PM +0900, Chaehyun Lim wrote:
>> The kbuild test robot reports the following build error for
>> openrisc-allmodconfig.
>>
>> >> drivers/staging/wilc1000/wilc_sdio.c:584:2: error: implicit
This patch removes unnecessary definition, PLL_WORKAROUND from the
Makefile. There is no use throughout the driver.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
This patch removes AGING_ALG from the Makefile because it is always in
use.
Signed-off-by: Tony Cho
---
drivers/staging/wilc1000/Makefile | 1 -
drivers/staging/wilc1000/coreconfigurator.h | 2 --
2 files changed, 3 deletions(-)
diff --git
On Tue, Sep 29, 2015 at 05:31:53AM +0300, Dan Carpenter wrote:
> On Mon, Sep 28, 2015 at 11:43:55PM +0530, Chandra S Gorentla wrote:
> > - The message queue is replaced with standard Linux linked list
> > - kmem_cache is used for list members
> > - A check for return value of receive method is
On Wed, Sep 30, 2015 at 06:12:50PM +0530, Chandra Gorentla wrote:
> > > while (1) {
> > > - wilc_mq_recv(, , sizeof(struct host_if_msg),
> > > );
> > > + ret = wilc_mq_recv(, ,
> > > + sizeof(struct host_if_msg), );
> > > + if (ret)
> > >
Dear Dan,
Thank you!
Always helpful your advice listen carefully.
I will send in the morning.
Thanks, BR
Leo
-Original Message-
From: Dan Carpenter [mailto:dan.carpen...@oracle.com]
Sent: Wednesday, September 30, 2015 7:05 PM
To: Cho, Tony
Cc: gre...@linuxfoundation.org;
On Tue, Sep 29, 2015 at 02:44:02AM +0200, Greg KH wrote:
> On Mon, Sep 28, 2015 at 11:43:55PM +0530, Chandra S Gorentla wrote:
> > - The message queue is replaced with standard Linux linked list
> > - kmem_cache is used for list members
>
> Why?
The list entires are of fixed type and repeatedly
On Thu, Oct 01, 2015 at 01:01:18AM +0200, Ola Olsson wrote:
> >From 5239e8e9aa79a131b716398efbf7a1203decbd9b Mon Sep 17 00:00:00 2001
> From: Ola Olsson
> Date: Thu, 1 Oct 2015 00:43:06 +0200
> Subject: [PATCH] iw: Memory leak in error condition Signed-off-by: Ola
>
Oh yes! :)
Suddenly valgrind was happy as well.
>From 2724dd259f2bf61a2b7c85a70a70fd640a583453 Mon Sep 17 00:00:00 2001
From: Ola Olsson
Date: Thu, 1 Oct 2015 00:43:06 +0200
Subject: [PATCH] iw: Memory leak in error condition Signed-off-by: Ola Olsson
Hi Ola,
On Thu, Oct 1, 2015 at 9:39 AM, Ola Olsson wrote:
> I guess not since there is a goto statement in between. Please correct
> me if I am wrong.
Oh, wait, you are right. I'm used to goto-free code.
Sorry for the noise.
Thanks,
Julian Calaby
> /Ola
>
> On Thu,
I guess not since there is a goto statement in between. Please correct
me if I am wrong.
/Ola
On Thu, Oct 1, 2015 at 1:34 AM, Julian Calaby wrote:
> Hi Ola,
>
> On Thu, Oct 1, 2015 at 9:27 AM, Ola Olsson wrote:
>> Oh yes! :)
>> Suddenly valgrind
>From 5239e8e9aa79a131b716398efbf7a1203decbd9b Mon Sep 17 00:00:00 2001
From: Ola Olsson
Date: Thu, 1 Oct 2015 00:43:06 +0200
Subject: [PATCH] iw: Memory leak in error condition Signed-off-by: Ola
Olsson
---
scan.c |2 ++
1 file
On Wed, Sep 30, 2015 at 3:04 PM, Johannes Berg
wrote:
>
>>
>> I'm not sure ratelimiting it would even work - it's not *that* high
>> frequency? Not really sure though.
>>
>> I think we can do either, it's not such a terribly important message as
>> far as I can tell.
>>
Hi Ola,
On Thu, Oct 1, 2015 at 9:27 AM, Ola Olsson wrote:
> Oh yes! :)
> Suddenly valgrind was happy as well.
>
> From 2724dd259f2bf61a2b7c85a70a70fd640a583453 Mon Sep 17 00:00:00 2001
> From: Ola Olsson
> Date: Thu, 1 Oct 2015 00:43:06 +0200
>
On Mon, Sep 28, 2015 at 10:27:30AM -0700, Peter Oh wrote:
> I prefer the current design to this new approach because drivers already
> know if it's mesh capable or not at build time, hence adding runtime
> configuration is redundant.
I do think the proposed patch is a bit overboard, so I suppose
>
> I would think a small change to ath10k firmware could fix this though,
> vendor willing.
>
+1 for this. Or even coming out with mesh mode instead of using AP
mode in ath10k firmware.
---
Chun-Yeow
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a
On Wed, 2015-09-30 at 08:07 -0700, Ben Greear wrote:
>
> On 09/29/2015 11:46 PM, Johannes Berg wrote:
> > On Fri, 2015-09-25 at 16:00 -0700, Ben Greear wrote:
> > > It seems that ath10k ar988X hardware has a bug where the BSSID
> > > for IBSS AMSDU frames is all zeros. The 'main' 636 ath10k
On Wed, 2015-09-30 at 15:21 +, Aaron Kempf wrote:
> I am a tiny bit confused why this 'centrino' driver isn't in the 650mb
> cd download for Debian 8.2
The driver is included in the kernel, so it should be there already.
What may not be included on the CD is the firmware, which you may have
On 09/30/2015 08:17 AM, Johannes Berg wrote:
On Wed, 2015-09-30 at 08:07 -0700, Ben Greear wrote:
On 09/29/2015 11:46 PM, Johannes Berg wrote:
On Fri, 2015-09-25 at 16:00 -0700, Ben Greear wrote:
It seems that ath10k ar988X hardware has a bug where the BSSID
for IBSS AMSDU frames is all
On 09/29/2015 11:46 PM, Johannes Berg wrote:
On Fri, 2015-09-25 at 16:00 -0700, Ben Greear wrote:
It seems that ath10k ar988X hardware has a bug where the BSSID
for IBSS AMSDU frames is all zeros. The 'main' 636 ath10k firmware
does not seem to use AMSDUs for IBSS, and when I enable it in my
On 30 Sep 2015 at 9:10, James Cameron wrote:
> On Tue, Sep 29, 2015 at 05:21:28PM +0200, PaX Team wrote:
> > hi all,
> >
> > in drivers/net/wireless/mwifiex/sta_ioctl.c the following functions
> >
> > mwifiex_set_wpa_ie_helper
> > mwifiex_set_wapi_ie
> > mwifiex_set_wps_ie
> >
> >
I am a tiny bit confused why this 'centrino' driver isn't in the 650mb
cd download for Debian 8.2
I detest Ubuntu in all flavors.. and if you guys would get this driver
into the Debian kernel, and on the default CD installer.. it would
make my life a lot easier.
I wish I could help to do this..
On 09/25/2015 02:00 AM, Kyle McMartin wrote:
On Thu, Sep 24, 2015 at 08:45:04PM +0200, Arend van Spriel wrote:
A number of end-users reported issues with BCM43602 on the 2015
MacBook Pro. It turned out the previously released firmware did
not properly support that device [1]. Hence an update of
Hi Johannes,
We've seen a handful of reports that seem to have verbose output from
the ieee80211_config_bw function in net/mac80211/mlme.c. It looks
similar to this:
[ 66.578652] wlp3s0: AP xx:xx:xx:xx:xx changed bandwidth, new config
is 2437 MHz, width 2 (2447/0 MHz)
[ 68.522437] wlp3s0:
76 matches
Mail list logo