AIL PROTECTED]>
To: "beneo" <[EMAIL PROTECTED]>
Cc: "Peter Stuge" <[EMAIL PROTECTED]>; "LinuxBIOS"
Sent: Friday, April 22, 2005 10:51 AM
Subject: Re: Booting Linux using netboot and HD
> On Fri, 2005-04-22 at 10:40, beneo wrote:
> > Thanks Peter and N
S boot.
I assume after ramdisk loaded, Kernel would rely on Linux IDE driver and no
longer make any BIOS hard drive service call, right?
Thanks
Beneo
- Original Message -
From: "Peter Stuge" <[EMAIL PROTECTED]>
To: "LinuxBIOS"
Sent: Friday, April 22, 2005 9:53 AM
On Fri, Apr 22, 2005 at 10:20:36AM -0700, Nathanael Noblet wrote:
[..FILO..]
> >Indeed, this is another option. But a new kernel is still neccessary
> >since the one in the ELF image (/boot/initrd-2.4.20-8smp.img) came
> >with neither ext3 nor IDE drivers.
>
> Not so, according to his first email,
On Thu, Apr 21, 2005 at 06:46:51PM -0700, beneo wrote:
> Then my trouble starts, every time I get a Linux Kernel Panic
> during the boot. The message is like this.
>
> Loading ext3.o module
> Mounting /proc filesystem
> Creating block devices
> kmod: failed to exec /sbin/modprobe -s -k block-m
Try turning the device on too:
device pci 1.6 on end
-Original Message-
From: YhLu [mailto:[EMAIL PROTECTED]
Sent: Friday, April 22, 2005 3:26 PM
To: Nathanael Noblet; beneo
Cc: LinuxBIOS
Subject: RE: Booting Linux using netboot and HD
AMD8111: IDE controller at PCI slot 01:04.1
On Fri, 2005-04-22 at 10:40, beneo wrote:
> Thanks Peter and Nathanale for your reply. I will try the things you guys
> listed in the email and let you know.
>
> I have one more question on the comment Peter made,
> >Peter Wrote:
> > Indeed, this is another option. But a new kernel is still necces
I changed the Config.lb as YhLu recommanded and payload to filo, after some
struggle, I finally can boot Linux!!! Thanks!
However, my ethernet connection with LinuxBIOS are still no good. I get a
msg like this during boot:
Applying iptables firewall rules: [ OK ]
Setting network parameters:
On Apr 22, 2005, at 9:53 AM, Peter Stuge wrote:
On Fri, Apr 22, 2005 at 09:23:40AM -0700, Nathanael Noblet wrote:
I would suggest skipping the netboot portion and use FILO. It will
load a kernel directly from the filesystem, if you are planning on
using that as that root system, no point in pu
CTED]
> Sent: Friday, April 22, 2005 11:36 AM
> To: beneo
> Cc: LinuxBIOS
> Subject: Re: Booting Linux using netboot and HD
>
>
> On Apr 22, 2005, at 11:05 AM, beneo wrote:
>
> > Below is the dump from Console, starting from LinuxBIOS to Kenel
> > Panic,
On Apr 22, 2005, at 11:05 AM, beneo wrote:
Below is the dump from Console, starting from LinuxBIOS to Kenel
Panic, If
you see anything strange, please let me know.
It seems good to me. Here is where my lack of knowledge tells me to
stick with what I know. I don't know how the initrd is load
PROTECTED]>; "LinuxBIOS"
Sent: Friday, April 22, 2005 1:39 PM
Subject: Re: Booting Linux using netboot and HD
> I strongly recommend filo for people trying to boot off ide. It just plain
> works for me and etherboot, though it is wonderful, has not been as
> reliable.
>
On Fri, Apr 22, 2005 at 10:51:37AM -0700, Nathanael D. Noblet wrote:
> If you ask me, you have two possible problems.
> 1) LinuxBIOS isn't setting up the IDE controller properly so that
> your kernel can't find it
I agree.
> or
> 2) Something in the moving the kernel and initrd to the tftp
> ser
On Fri, 22 Apr 2005, beneo wrote:
> Does filo support ext3 file system? the intruduction say it supports ext2,
> but didn't say anything about ext3. If it doesn't support ext3, does it mean
> I have to re-install Linux to ext2?
IIRC read-only ext3 can almost always be read by ext2 file system c
On Fri, Apr 22, 2005 at 01:58:31PM -0700, beneo wrote:
> Does filo support ext3 file system? the intruduction say it
> supports ext2, but didn't say anything about ext3. If it doesn't
> support ext3, does it mean I have to re-install Linux to ext2?
On Fri, Apr 22, 2005 at 04:09:53PM -0600, Ronald
I strongly recommend filo for people trying to boot off ide. It just plain
works for me and etherboot, though it is wonderful, has not been as
reliable.
ron
___
Linuxbios mailing list
Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/list
On Apr 21, 2005, at 6:46 PM, beneo wrote:
I used a command like this to make the elf image.
mkelfImage --command-line="root=/dev/hda2 rw console=ttyS0,115200n8" \
--kernel=/boot/vmlinuz-2.4.20-8smp
--ramdisk=/boot/initrd-2.4.20-8smp.img \
--output=/root/elf/linuxImage
I think my root par
16 matches
Mail list logo
