I've briefly experimented with IN-9's, and I found them to be erratic.
Other people on this group have had better results, so I would conclude
there was inconsistent quality when these were manufactured. You *might*
get luckier with another batch from a different seller.
I,too, found that I nee
I don't see a circuit in the link - it links on to a dead site. Can you
post here? Some thoughts...
Are you sure you are using IN-13 not IN-9 ? 13mA to fully light the tube is
around what might be expected for a slightly cathode poisoned IN-9. It's
easy to check even if the tube markings have
No embedded image...
On Tue, May 17, 2016 at 4:40 AM, Joe Croft wrote:
> Hi Jon,
>
> I have embedded the picture below. It's a good guess if you post the
> circuit on a forum, you don't mind others re-posting it. I am definitely
> using in IN-13. 3 legs vs 2, it's hard to miss the 3rd leg ;).
>
Once more, but this time with feeling
On Tue, May 17, 2016 at 10:42 AM, Jon Jackson wrote:
> No embedded image...
>
>
> On Tue, May 17, 2016 at 4:40 AM, Joe Croft wrote:
>
>> Hi Jon,
>>
>> I have embedded the picture below. It's a good guess if you post the
>> circuit on a forum, you do
OK, that's better. Your problem is the 4K7 base resistor I think - not
needed for this configuration. Base current is limited by the emitter
resistor (620R).
Jon.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group
What purpose does the 3rd connection of the IN-13 serve ? According to the
schematic it should be sourcing around 100uA. There is no such terminal on
the IN-9; I'm wondering if the 3rd terminal results in more-stable
operation ??
--
You received this message because you are subscribed to the G
My guess is that it keeps a little pool of ionized gass at the bottom of
the tube so the line will always start at the bottom. That's just my guess
though.
-joe
On May 18, 2016 1:32 PM, "gregebert" wrote:
> What purpose does the 3rd connection of the IN-13 serve ? According to the
> schematic it
Though, the 4K7 is not needed, it does no harm. Even if the xstr had the
minimal hfe of 25, there would be less than a 1V drop across that resistor.
I have a IN-13 running right now, on my nixie thermometer. The drawing of
the pinout, is correct, from the viewed side of the tube. The aux cathode
Hi threeneurons,
What current does your in-13 draw to get it to show fullscale?
-joe
On May 18, 2016 2:41 PM, "'threeneurons' via neonixie-l" <
neonixie-l@googlegroups.com> wrote:
> Though, the 4K7 is not needed, it does no harm. Even if the xstr had the
> minimal hfe of 25, there would be less
~4.5mA. Just as advertised.
Just a note. These tubes do fail, in weird ways, after many hours of use.
They may still glow, but it shows up at odd spots. I've noticed in the last
few years, a lot of used tubes coming from Eastern Europe, being advertised
as NOS. Its easy to spot with nixies and
I'm wondering if there's something we're not seeing on the diagram which is
responsible for the observations - either on it's own or in combination
with the 4K7.
So, short out the 4K7 - does that materially alter what you see? Second,
tell us more about how Vc is generated - is it a reasonably
Best thing to do is gather data for several tubes, and plot it.
Inconsistent data suggests problems with the tubes; maybe they are used,
out-of-spec, reject, etc units.
I would use a voltmeter and measure the voltage at the following locations,
while adjusting Vc to obtain
(a) First speckle of
I do seem to have a problem with my board. I have pulled one of the tubes
and just tried it on a bread board and life is good. Though in the board,
not so good. I will have to dig harder on the layout. Something is just not
right.
-joe
On Thu, May 19, 2016 at 2:59 PM, gregebert wrote:
> Best th
It's hell being dyslexic! I have the tubes wired backwards :( What is
amazing is how they lit up and seem to work fine besides the issue of
drawing 3 times as much current they should.
Sigh... Off to add lots of cuts and jumpers too my board!
-joe
On Thu, May 19, 2016 at 5:32 PM, Joe Croft wrot
Joe, Don't fret too much over this. We've all been there at one time or
another in our lives. Good luck, you'll get er done. Ira.
On 5/19/2016 6:59 PM, Joe Croft wrote:
It's hell being dyslexic! I have the tubes wired backwards :( What is
amazing is how they lit up and seem to work fine besid
On 5/19/2016 6:59 PM, Joe Croft wrote:
It's hell being dyslexic! I have the tubes wired backwards :( What is
amazing is how they lit up and seem to work fine besides the issue of
drawing 3 times as much current they should.
Sigh... Off to add lots of cuts and jumpers too my board!
-joe
Arg
16 matches
Mail list logo