I know Rayovac will replace your batteries ;-) Not sure about Princeton.
Yeah, never leave batts inside your lights when not in use.
On Thu, Dec 4, 2014 at 11:56 PM, Mallory via Texascavers
texascavers@texascavers.com wrote:
Does anyone know if Princeton tecs warranty is rendered null and void
Mallory,
I have successfully replaced PT lights that were damaged by battery leakage,
though I think I tried to clean them up first to see if that revived them.
Sometimes if the corrosion isn't too bad, they will work again if you're
persistent with a Q-tip, some toothpicks and some rubbing
I can't speak directly to the corrosion warranty problem but I can tell you
that they have been cooperative in sending replacement parts for the poorly
engineered and prone to crack battery compartment doors on their *FUEL*
headlamps. Call 1-800-257-9080 and talk to them about your problem. I
Doesn't hurt to try.
--
Lyndon Tiu
On Dec 4, 2014 11:56 PM, Mallory via Texascavers
texascavers@texascavers.com wrote:
Does anyone know if Princeton tecs warranty is rendered null and void if
there's evidence of corrosion inside the battery pack? I apparently put
rayovac brand batteries in
I never call Princeton Tec. I just mail the broken lights in.
Unfortunately, the lights break *a lot*. Fortunately, they've replaced
every single one without question.
Dale
On Fri, Dec 5, 2014 at 8:44 AM, Lyndon Tiu via Texascavers
texascavers@texascavers.com wrote:
Doesn't hurt to try.
--
I have successfully removed corrosion with vinegar by dismantling and soaking.
Not PT per se, but on a couple of lost cause lights.
--Don
On Dec 5, 2014, at 7:53 AM, Diana Tomchick via Texascavers
texascavers@texascavers.com wrote:
Mallory,
I have successfully replaced PT lights that
A word of caution when using acids around circuit boards and connections. Acids
can promote corrosion. Rinse with a baking soda solution to neutralize the
acid.
Some people use a silicone RTV in their caving lights and flashes. Smell it
first. If it has a smell of vinegar (Acetic Acid) do
Agreed. I was speaking specifically about battery connections and springs,
which I pull out completely and soak, then rinse. I've resurrected several lost
causes this way.
--Don
On Dec 5, 2014, at 12:11 PM, Steve's IPhone via Texascavers
texascavers@texascavers.com wrote:
A word of
What's the difference between this stuff and Dielectric grease?
--Don
On Dec 5, 2014, at 12:11 PM, Steve's IPhone via Texascavers
texascavers@texascavers.com wrote:
Personally I use a thin coating of silicone grease also made by Dow Corning,
called Compound 4. It keeps corrosion from
I am not sure, but I would imagine the viscosity would be a consideration.
Purity compared to broad category of dielectric greases might be another
factor.
OTOH *anything* is better than corrosion! ;-)
On Dec 5, 2014, at 12:29 PM, Don Arburn via Texascavers
texascavers@texascavers.com
Just an owl swimming on Lake Michigan:
http://youtu.be/YnCPJ8FPbtw
___
Texascavers mailing list | http://texascavers.com
Texascavers@texascavers.com | Archives:
http://www.mail-archive.com/texascavers@texascavers.com/
The City of Austin - Watershed Cave Team is trying to put together a report
about Austin Caverns, and we'd like some input from cavers who've actually
been in there! Big questions are: Is the north part horizontal, how high
are the ceilings, etc.. Also are there cavers interested in an effort to
Sometime in 1993, I think, I convinced some Aggie Cavers to dig in the
cave. We called it Project R.A.C.K.
(Restoration of Austin Caverns and Karst )
We rented a Uhaul trailer and tied a bucket and pulley to the tree next to
the entrance.
We filled up the trailer with dirt.
They all thought I
heather, katie again
I was actually IN Austin caverns not too long before the washout/closing. That
old map reflects areas that are completely silted shut to the depth of feet,
and the big water pipe in it was being washed under. Main drop in about half
of goat cave (manhole). Stoop passage
14 matches
Mail list logo