I've followed the same instructions in upgrade page, and after completed
successfully, I've tried tos-check-env which also passed without errors or
warnings.
Then I've followed the check for ncc version in lesson 1 of the new
tutorial and issue the same commands for updating the ncc path ..
Can y
On Sep 6, 2006, at 10:14 PM, Conor Todd wrote:
Interrupts are disabled within async{} blocks. Therefore, no
events can be fired, and nothing will happen except for what's in
your async code (unless the batteries die or your mote falls into a
pool of molten lava).
- Conor
You mea
Regarding earlier problem, I have noticed that it appeared after I update my tinyos Tree.
By giving following command:
cvs -z3 -d:pserver:[EMAIL PROTECTED]:/cvsroot/tinyos co -P tinyos-1.x
Well now tree is updated and a lot of file has been replaced and/or
stored. Now I am wondering which fil
No. The only way to break out of the async nature of interrupt handlers (and functions called by them) is to post a task, thus allowing the synchronous interrupt-handling call tree to terminate. - C
On 9/6/06, Adam <[EMAIL PROTECTED]> wrote:
It is a great question - I am looking at build/telos
Interrupts are disabled within async{} blocks. Therefore, no events can be fired, and nothing will happen except for what's in your async code (unless the batteries die or your mote falls into a pool of molten lava).
- ConorOn 9/6/06, Adam <[EMAIL PROTECTED]> wrote:
(1) Inside the tinyO
It is a great question - I am looking at build/telosb/app.c and has a
complementary question:
I notice an async event is actually implemented by
__attribute((interrupt(xx))) function:
void __attribute((wakeup)) __attribute((interrupt(14)))
sig_ADC_VECTOR(void)
Can another interuption interupt t
(1) Inside the tinyOS event-driven concurrency system, does the atomic section (including called function) occupy the CPU
and run until completion, such that even an async event (interrupt) can not
preempt it? -- even assume the protected variables has nothing related with the
async event fun
Hello everybody,
In tinyos, usually, an interrupt signals an async
event. When an interrupt routine is executed, all the
interrupts are masked and cannot interrupt the current
interrupt routine. If this interrupt routine jumps to
a signalled event, are the other interrupts disabled
until this even
Hi,I am involved in an assignment to program the mica2 sensors to send back a message once a thermal reading of 35C and 40C is detected. Can this program be written in nesC? Please give some pointers in order to create this program and also errors to be vary of as I am still in the beginning phase
Good evening,
When I try to use McuSleepC and Tossim I obtain the following compilation error:
/tmp/ccTyOEVj.s: Assembler messages:
/tmp/ccTyOEVj.s:34478: Error: no such instruction: `sleep'
I haven't any problem when I try to compile it for micaz platform, instead.
Have a good night !
bye.
Hello everyone.
I want to measure end to end delay using sky tmote.
I will sychronise nodes, then source node sends local time to destination node.
So, destination can get end to end delay using difference local time in receiver and received time value.
Is this proper way to measure end to
Back in 2004, This was posted to the tinyos-users mailing list.> Sometimes -- for a wide range of reasons -- the fuse bits become set
improperly. This can lead to really weird behavior which is very hard
to debug or figure out[1]. Among other > things, it leads to lots of
cries for help on tinyo
At this point, the best way is probably hook up a small shunt
resistor (1-50Ohm depending on your load and oscilloscope accuracy)
in series between the battery and the board, either on the ground
side or the Vdd side. Then use an oscilloscope to measure it.
Also pay attention to the wavefor
On 9/5/06, Sumit Gupta <[EMAIL PROTECTED]> wrote:
Hi,
I had following four errors while compiling nesc-1.2.7 package. When I gave
make command, I got following errors in the end. Can anyone help me in
removing them?
ava Xvariables.java Xwire.java Xwiring.java
Location.java: In class
`net.tin
Hi all, I am working on Tinyos 2.x. In Chapter 11 of tinyos2.x tutorial for TOSSIM, I get the debug statements of the RadioCountToLeds application, when simulated using python, but i dont get any debug statements when i use a C++ script. Can anyone help me in this issue ??
Thanks and
I just want to add that before this i just installed nesC compileter,
Simple::XML and updated the CVS tree for TinyOS. and I before doing all
this I could compile normal applications for all platforms but now it's
not working for PC platform at all. Please advice.
SumitOn 9/6/06, Sumit Gupta <[EMA
Hi,
I installed nucleus on cygwin and I am having some problem while
compiling an application /tinyos-1.x/apps/CntToLeds. I followed
instructions given in Nucleus Manual but I am Getting following errors
only when I am trying to compile it with PC platform. (make pc nucleus)
but it compiled fine
Hi,
I installed nucleus on cygwin and I am having some problem while
compiling an application /tinyos-1.x/apps/CntToLeds. I followed
instructions given in Nucleus Manual but I am Getting following errors
only when I am trying to compile it with PC platform. (make pc nucleus)
but it compiled fine
Hi,
I had following four errors while compiling nesc-1.2.7 package. When I gave make command, I got following errors in the end. Can anyone help me in removing them?
ava Xvariables.java Xwire.java Xwiring.java
Location.java: In class `net.tinyos.nesc.dump.xml.Location':
Location.java: In method
Phil,
No, you only need to install the 2.x "tools", which really are nesC
tools more than anything else and should be equally applied to anyone
running nesC 1.2.x regardless of which TinyOS version they are
running. He is using Boomerang, which has both 1.x and 2.x features,
thus the need for n
On Sep 6, 2006, at 8:13 AM, Joe Polastre wrote:
Have you installed tinyos-tools from tinyos-2.x/tools/
Right. As I said before, the issue is that you have a 1.x toolchain
(read: nesdoc), but for some reason the 1.x source tree has code in
it that you need the 2.x toolchain for (read: gen
On Sep 5, 2006, at 10:43 PM, Firas Daghmash wrote:
Hi,
after updating form version 1.x to 2.x, I am trying to compile one
of the
applications (Blink), either with make micaz sim or make micaz and ann
error repoted and cygwin generate this error message:
The procedure entry point __getreent
Have you installed tinyos-tools from tinyos-2.x/tools/
On 9/6/06, Pablo Gil Montaño <[EMAIL PROTECTED]> wrote:
I've upgraded but I still have the same problem. The versions I'm using now
are (ncc --version):
ncc: 1.2alpha5
nescc: 1.2.7a
avr-gcc: avr-gcc (GCC) 3.4.3
However, I have tried exactl
I'm not sure, but I think that TinyOS automatically puts the CPU into sleep when there are no tasks to be done by the CPU.harun <[EMAIL PROTECTED]> escribió: Hello, I´m trying to put a telosb mote into the CPU sleep mode in order to power save. How can I do this ? Are there any examp
I've upgraded but I still have the same problem. The versions I'm using now are (ncc --version):ncc: 1.2alpha5nescc: 1.2.7aavr-gcc: avr-gcc (GCC) 3.4.3However, I have tried exactly the same under windows (with the tools provided by moteiv) and I can build the documentation for tmote without any pro
Do you every initialize msg_buffer to point to an actual message?
You need something like:
TOS_Msg buffer;
TOS_MsgPtr msg_buffer;
command result_t StdControl.init() {
msg_buffer = &buffer;
}
On 9/6/06, Hari Hara Sudhan <[EMAIL PROTECTED]> wrote:
Hi every one,
I have a problem with s
Hello,
I´m
trying to put a telosb mote into the CPU sleep mode in order to power
save.
How
can I do this ?
Are
there any examples ?
And
how does the power management works with a telosb
?
Thank you in advance
___
Tinyos-help mailing list
[1] uses nesC 1.2.4. Upgrade to 1.2.7.
-Joe
On 9/6/06, Pablo Gil Montaño <[EMAIL PROTECTED]> wrote:
The problem is that I am using Linux (Ubuntu 6.06) and I can't just install
the .exe provided by moteiv. I've followed the guide in [1], and apart from
the problem with the documentation, everyt
just place the cursor at the end of the file in any editor, insert a new line by pressing enter, save the file and end of the warning.primalfear 69 <[EMAIL PROTECTED]> escribió: hello everybody In many of my programs when i compile there is warning stating xyz.nc:9:2: warning: no new line at
hello
I need one program Called PrintBigMsgs , if anyone cai help me feel free to answer back
thanks
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Sometimes you need one more linespace after the end of the program. Try it
-Original Message-
From: primalfear 69 [mailto:[EMAIL PROTECTED]
Sent: Wed 9/6/2006 2:36 PM
To: tinyos-help
Cc:
Subject: [Tinyos-help] why do i get this warning..
hello everybody
In many of my programs when i compile there is warning stating
xyz.nc:9:2: warning: no new line at end of file
Regards
Primeballerina
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkel
Hi Phil,
thank you.
For my problem there was a work-aroung from you (i guess) by e-mail earlier:
TOSSIM for TinyOS 2.0 currently does not work under Cygwin. It turns out to be
a really nasty problem: in Windows, shared objects cannot have undefined
ref
I am having problems programming a mica2 mote. when i use the make install...
command the load seems to be
successfully. however, the program does not seem to be running. i am trying to
load the blink app onto the mote but the led
does not blink. when the mote is powered all three LEDs light, the
I'm trying to solve a problem which is rose with the i2c driver for msp430.
Shortly,
I call a I2C read operation and get the readDone signal.
If i call another I2C read or write command, i don't get any signal
(readDone or Writedone) back.
All these operations are called with the I2C_START|I2C
Perhaps these installation guides will help you. I've followed [2] and everything seems to work ok except for the documentation generation. I have Ubuntu 6.06 and I had to change the link /usr/bin/java to the sun executable instead of the one included with ubuntu, but apart form that, I followed t
The problem is that I am using Linux (Ubuntu 6.06) and I can't just install the .exe provided by moteiv. I've followed the guide in [1], and apart from the problem with the documentation, everything seems to be working.[1]: http://www.chadmetcalf.com/tinyos-1x-on-ubuntu/ Joe Polastre <[EMAIL PROTEC
I don't think that is a problem about mixing 1.x code with 2.x code, because it happens with all the applications included with tinyos-1.x under /apps. Moreover, if I try to generate the documentation for the platform mica I get no error, but if I do the same with the same application for tmote I g
I just noticed that I cannot even compile a normal pc application i.e.
without nucleus. Is it because I forgot to add any path or somthing. I
just want to inform that I tried to install Nucleus before this and
followed all the steps successfully mentioned in its manual. I
installed it on cygwin, ho
Adding to the problem, it seems that there is a problem with tinyos-1.x/tos/platform/pc/hpl.c file. Please look into it.
Also, I hve seen a suggestion posted at http://mail.millennium.berkeley.edu/pipermail/tinyos-commits/2005-June/006162.html
Making change in it because of simulation proble
First I think you have to return m in the end of the event. And think about
they are pointers,so for example:
void swap (int *px, int *py){
int temp;
temp=*px;
*px=*py;
*py=temp;
}
before you were swapping the copies of the elements.
cheers
Daniele
-Original Me
Hi,
after updating form version 1.x to 2.x, I am trying to compile one of the
applications (Blink), either with make micaz sim or make micaz and ann
error repoted and cygwin generate this error message:
The procedure entry point __getreent could not be located in the dynamic
link library cygwin1
Hi every one,
I have a problem with swapping tos
message buffer
I have to develop an application which has to receive a TOS
Message through air and then Broad cast the message.
The code is
TOS_MsgPtr msg_buff;
event TOS_MsgPtr ReceiveMsg.
43 matches
Mail list logo