On Tue, 03 Mar 2015 08:17:56 +
Ian Campbell ijc+ub...@hellion.org.uk wrote:
On Mon, 2015-03-02 at 00:07 +0200, Siarhei Siamashka wrote:
Just one suggestion. It would be really nice if the Debian installer
could present itself on all the available consoles, so that the user
can use any
Hi Boris,
On 04/03/2015 13:50, Boris Brezillon wrote:
If that's accepted, then yes I could help moving boards from the old
approach to the new one, though I was expecting this to be done by
board maintainers.
Note that I'm not breaking anything (the old boards definition are
still
On Tue, Mar 03, 2015 at 08:03:00AM -0700, Simon Glass wrote:
At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of stack, some boards set CONFIG_SPL_STACK to
point into SDRAM. They then
On Wed, Mar 04, 2015 at 08:42:58AM +0100, Heiko Schocher wrote:
Hello Tom,
Am 02.03.2015 14:59, schrieb Tom Rini:
On Mon, Mar 02, 2015 at 07:56:41AM +0100, Heiko Schocher wrote:
Hello Simon,
Am 24.02.2015 14:31, schrieb Simon Glass:
Hi Heiko,
On 23 February 2015 at 23:18, Heiko
On Tue, Mar 03, 2015 at 08:15:56AM -0600, Rob Herring wrote:
On Tue, Mar 3, 2015 at 5:10 AM, Dileep Katta dileep.ka...@linaro.org wrote:
Signed-off-by: Angela Stegmaier angelaba...@ti.com
Signed-off-by: Dileep Katta dileep.ka...@linaro.org
You need a full commit message as I don't really
On Tue, Mar 03, 2015 at 04:40:43PM +0530, Dileep Katta wrote:
Adds the registers to get the serial number of dra7xx boards.
Serial# environment variable will be set if not done already.
This will be useful to show correct information in
fastboot devices commands.
Signed-off-by: Angela
Hi Dileep,
-Original Message-
From: Dileep Katta [mailto:dileep.ka...@linaro.org]
Sent: Tuesday, March 03, 2015 5:11 AM
To: u-boot@lists.denx.de; robherri...@gmail.com; Rini, Tom;
rob.herr...@linaro.org; s...@broadcom.com; l.majew...@samsung.com;
Stegmaier, Angela
Cc: Dileep Katta
On Tue, Mar 03, 2015 at 04:40:41PM +0530, Dileep Katta wrote:
Signed-off-by: Angela Stegmaier angelaba...@ti.com
Signed-off-by: Dileep Katta dileep.ka...@linaro.org
---
arch/arm/cpu/armv7/omap5/Kconfig | 5 +
board/ti/dra7xx/Kconfig | 13 ++
board/ti/dra7xx/MAINTAINERS
On 4 March 2015 17:03:17 CET, Tom Warren I'll apply this series to
u-boot-tegra/next today, and if everything
checks out, send a PR to Albert tomorrow.
Perfect, thanks Tom.
___
U-Boot mailing list
U-Boot@lists.denx.de
On 4 March 2015 at 23:59, Tom Rini tr...@konsulko.com wrote:
On Wed, Mar 04, 2015 at 05:05:11PM +, Stegmaier, Angela wrote:
Hi Dileep,
-Original Message-
From: Dileep Katta [mailto:dileep.ka...@linaro.org]
Sent: Tuesday, March 03, 2015 5:11 AM
To:
Hi Tom,
On 4 March 2015 at 09:30, Tom Rini tr...@konsulko.com wrote:
From: Simon Glass s...@chromium.org
Currently in some cases SDRAM init requires global_data to be available
and soon this will not be available prior to board_init_f(). Adjust the
code paths in these cases to be correct.
Hi Tom,
On 4 March 2015 at 08:42, Tom Rini tr...@konsulko.com wrote:
On Tue, Mar 03, 2015 at 08:03:00AM -0700, Simon Glass wrote:
At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of
On 3 March 2015 at 19:40, Joe Hershberger joe.hershber...@ni.com wrote:
In the case where the arch defines a custom map_sysmem(), make sure that
including just common.h is sufficient to have these functions as they
are when the arch does not override it.
Signed-off-by: Joe Hershberger
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Allow network devices to be referred to as eth0 instead of
eth@12345678 when specified in ethact.
Add tests to verify this behavior.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reviewed-by: Simon Glass
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
The 'lo' interface on Linux doesn't support thinks like ARP or
link-layer access like we use to talk to a normal network interface.
A higher-level network API must be used to access localhost.
As written, this interface
Hi Joe,
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Take a pass at plumbing errors through to the users of the network stack
Currently only the start() function errors will be returned from
NetLoop(). recv() tends not to have errors, so that is likely not worth
On Wed, Mar 04, 2015 at 05:05:11PM +, Stegmaier, Angela wrote:
Hi Dileep,
-Original Message-
From: Dileep Katta [mailto:dileep.ka...@linaro.org]
Sent: Tuesday, March 03, 2015 5:11 AM
To: u-boot@lists.denx.de; robherri...@gmail.com; Rini, Tom;
rob.herr...@linaro.org;
Hi Joe,
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
This is needed to test the netretry functionality (make the command fail
on a sandbox eth device).
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reviewed-by: Simon Glass s...@chromium.org
Please see nits
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Previously the net functions would access memory assuming physmem did
not need to be mapped. In sandbox, that's not the case.
Now we map the physmem specified by the user in loadaddr to the buffer
that represents that
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Make sure that the ethrotate behavior occurs as expected.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reviewed-by: Simon Glass s...@chromium.org
---
Changes in v5:
-Added a test for skipping un-probe-able
Hi Joe,
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Implement a bridge between u-boot's network stack and Linux's raw packet
API allowing the sandbox to send and receive packets using the host
machine's network interface.
This raw Ethernet API requires elevated
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
The effect of the netretry env var was recently changed. This test
checks that behavior.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reviewed-by: Simon Glass s...@chromium.org
Hi Joe,
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Stop forcing drivers to call net_process_received_packet() - formerly
called NetReceive(). Now the uclass will handle calling the driver for
each packet until the driver errors or has nothing to return. The uclass
Hi Michal,
On 4 March 2015 at 05:58, Michal Suchanek hramr...@gmail.com wrote:
On 4 March 2015 at 13:29, Sjoerd Simons sjoerd.sim...@collabora.co.uk wrote:
On Wed, 2015-03-04 at 11:48 +0100, Michal Suchanek wrote:
On 4 March 2015 at 00:46, Simon Glass s...@chromium.org wrote:
Hi Michal,
On Wednesday, March 04, 2015 at 07:52:04 PM, Dinh Nguyen wrote:
On 03/04/2015 06:39 AM, Marek Vasut wrote:
On Monday, March 02, 2015 at 05:27:50 PM, dingu...@opensource.altera.com
wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
Add a section of SRAM to the SPL linker file.
On Monday, March 02, 2015 at 05:27:49 PM, dingu...@opensource.altera.com wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
This adds the code to configure the SDRAM controller that is found in the
SoCFGPA Cyclone5 and Arria5 platforms.
Signed-off-by: Dinh Nguyen
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
First just add support for MAC drivers.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-Add a note to doc/README.drivers.eth about its obsolescence
-Expanded the Kconfig help
-Moved dm/
On 03/04/2015 06:39 AM, Marek Vasut wrote:
On Monday, March 02, 2015 at 05:27:50 PM, dingu...@opensource.altera.com
wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
Add a section of SRAM to the SPL linker file.
Signed-off-by: Dinh Nguyen dingu...@opensource.altera.com
Hi!
Can
On 4 March 2015 at 16:17, Siarhei Siamashka siarhei.siamas...@gmail.com wrote:
On Tue, 03 Mar 2015 08:17:56 +
Ian Campbell ijc+ub...@hellion.org.uk wrote:
On Mon, 2015-03-02 at 00:07 +0200, Siarhei Siamashka wrote:
Just one suggestion. It would be really nice if the Debian installer
On 03/04/2015 01:39 PM, Marek Vasut wrote:
On Wednesday, March 04, 2015 at 07:52:04 PM, Dinh Nguyen wrote:
On 03/04/2015 06:39 AM, Marek Vasut wrote:
On Monday, March 02, 2015 at 05:27:50 PM, dingu...@opensource.altera.com
wrote:
From: Dinh Nguyen dingu...@opensource.altera.com
Add a
On Thu, 2015-02-26 at 23:46 -0600, Bansal Aneesh-B39320 wrote:
Regards,
Aneesh Bansal
-Original Message-
From: Wood Scott-B07421
Sent: Friday, February 27, 2015 10:22 AM
To: Bansal Aneesh-B39320
Cc: u-boot@lists.denx.de; Sun York-R58495; Gupta Ruchika-R66431
Subject:
From: Simon Glass s...@chromium.org
Currently in some cases SDRAM init requires global_data to be available
and soon this will not be available prior to board_init_f(). Adjust the
code paths in these cases to be correct. In some cases we had the SPL
stack be in DDR as we might have large stacks
From: Franck Jullien franck.jull...@gmail.com
Mass storage is not necessary present on interface 0. This
patch allow usb_stor_scan to look in every available interface.
Signed-off-by: Franck Jullien franck.jull...@gmail.com
---
v2: create a new function to improve indentation
v3: more
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Add basic network support to sandbox which includes a network driver.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Reviewed-by: Simon Glass s...@chromium.org
---
Changes in v5:
-Added help to the sandbox eth
Hi Joe,
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
Take the opportunity to enforce better names on newly written or
retrofitted Ethernet drivers.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-New to v5
Changes in v4: None
On 3 March 2015 at 19:41, Joe Hershberger joe.hershber...@ni.com wrote:
The return codes in common/cmd_net.c had a number of inconsistencies.
Update them to all use the enum from command.h
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
---
Changes in v5:
-New to v5
Changes in v4:
On Wed, Mar 04, 2015 at 09:28:54PM +0900, Minkyu Kang wrote:
The following changes since commit 19e5118d1c4c9bd2dc9e52355774c8ea73839b5b:
mpc837xerdb: fix Calling __hwconfig without a buffer warning (2015-03-02
15:11:36 -0500)
are available in the git repository at:
On Tue, Mar 03, 2015 at 08:02:57AM -0700, Simon Glass wrote:
This function has grown into something of a monster. Some boards are setting
up a console and DRAM here in SPL. This requires global_data which should be
set up in one place (crt0.S).
There is no need for SPL to use s_init() for
On Tue, Mar 03, 2015 at 08:03:01AM -0700, Simon Glass wrote:
When CONFIG_SYS_MALLOC_SIMPLE is defined, free() is a static inline. Make
sure that the export interface still builds in this case.
Signed-off-by: Simon Glass s...@chromium.org
Applied to u-boot/master, thanks!
--
Tom
On Wed, Mar 04, 2015 at 11:30:28AM -0500, Tom Rini wrote:
From: Simon Glass s...@chromium.org
Currently in some cases SDRAM init requires global_data to be available
and soon this will not be available prior to board_init_f(). Adjust the
code paths in these cases to be correct. In some
Enable DM and DM_SPI support for both Cyclone 5 and Arria 5 boards,
since they use drivers which require those.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See cl...@opensource.altera.com
Cc: Dinh Nguyen dingu...@opensource.altera.com
Cc: Pavel Machek pa...@denx.de
Cc: Simon Glass
Add Cadence QSPI controller Kconfig entry.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See cl...@opensource.altera.com
Cc: Dinh Nguyen dingu...@opensource.altera.com
Cc: Jagannadha Sutradharudu Teki jagannadh.t...@gmail.com
Cc: Pavel Machek pa...@denx.de
Cc: Simon Glass
Add DWC SPI controller Kconfig entry.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Chin Liang See cl...@opensource.altera.com
Cc: Dinh Nguyen dingu...@opensource.altera.com
Cc: Jagannadha Sutradharudu Teki jagannadh.t...@gmail.com
Cc: Pavel Machek pa...@denx.de
Cc: Simon Glass s...@chromium.org
On Tue, Mar 03, 2015 at 08:03:00AM -0700, Simon Glass wrote:
At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of stack, some boards set CONFIG_SPL_STACK to
point into SDRAM. They then
On Tue, Mar 03, 2015 at 08:02:58AM -0700, Simon Glass wrote:
This is already set up in crt0.S. We don't need a new structure and don't
really want one in the 'data' section of the image, since it will be empty
and crt0.S's changes will be ignored.
As an interim measure, remove it only if
On Tue, Mar 03, 2015 at 08:02:59AM -0700, Simon Glass wrote:
Use the full driver model GPIO and serial drivers in SPL now that these are
supported. Since device tree is not available they will use platform data.
Remove the special SPL GPIO function as it is no longer needed.
This is all
I'm currently working on the kernel dtb for our MX53 board.
U-boot loads the dtb and kernel and then gets stuck at starting kernel
I've triple checked the uart pad setup in imx53.dtsi
Here is my entire dts (everything else is stripped for testing)...
-
This updates r8a7794 QoS to revision 0.31 for ES1 and revision 0.321 for ES2.
Signed-off-by: Kouei Abe kouei.abe...@renesas.com
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
---
arch/arm/cpu/armv7/rmobile/Kconfig | 2 +-
arch/arm/include/asm/arch-rmobile/r8a7794.h |
This updates r8a7793 QoS to revision 0.311.
Signed-off-by: Kouei Abe kouei.abe...@renesas.com
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
---
arch/arm/cpu/armv7/rmobile/Kconfig | 2 +-
board/renesas/gose/qos.c | 72 +++---
2 files
This updates r8a7790 QoS to revision 0.973.
This commit can changed from KConfig to fit contents of the QoS.
Signed-off-by: Kouei Abe kouei.abe...@renesas.com
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
---
arch/arm/cpu/armv7/rmobile/Kconfig | 22
This updates r8a7791 QoS to revision 0.411.
Signed-off-by: Kouei Abe kouei.abe...@renesas.com
Signed-off-by: Nobuhiro Iwamatsu nobuhiro.iwamatsu...@renesas.com
---
arch/arm/cpu/armv7/rmobile/Kconfig | 2 +-
board/renesas/koelsch/qos.c| 104 -
2 files
Hi,
I'm planning to use the 'next' tree for u-boot-dm and start applying
things targeted for U-Boot 2015.07 as they are ready. There is quite a
bit in flight at present and now RC3 is out for U-Boot 2015.04, the
rebase cost should be fairly small. This tree will run for
approximately 6 weeks.
Hi Bin,
On 25 February 2015 at 02:29, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Feb 19, 2015 at 5:10 AM, Simon Glass s...@chromium.org wrote:
This function returns -ENOENT when the property is missing (which the caller
might forgive) and also when the property is present but
Hi Bin,
On 26 February 2015 at 00:15, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Feb 26, 2015 at 8:55 AM, Simon Glass s...@chromium.org wrote:
Hi Bin,
On 25 February 2015 at 01:45, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Feb 19, 2015 at 5:10 AM, Simon Glass
Hi Bin,
On 26 February 2015 at 00:26, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Feb 19, 2015 at 5:10 AM, Simon Glass s...@chromium.org wrote:
Add a convenience function to access the private data that a uclass stores
for each of its devices. Convert over most existing uses for
Hello Simon,
Am 03.03.2015 01:05, schrieb Simon Glass:
Commit d908898 updated the ScanPath() function but not its documentation
and not all its callers.
This breaks the toolchain check after it is downloaded. Fix it.
Signed-off-by: Simon Glass s...@chromium.org
---
Secure Boot Target is added for NAND for P3041.
Changes:
In PowerPC, the core begins execution from address 0xFFFC.
In case of secure boot, this default address maps to Boot ROM.
The Boot ROM code requires that the bootloader(U-boot) must lie
in 0 to 3.5G address space i.e. 0x0 - 0xDFFF.
Secure Boot Target is added for NAND for P5020 and P5040.
The Secure boot target has already been added for P3041 by
enabling CONFIG_SYS_RAMBOOT and configuring CPC as SRAM.
The targets for P5020 and P5040 are added in the same manner.
Signed-off-by: Ruchika Gupta ruchika.gu...@freescale.com
Hello Tom,
Am 04.03.2015 17:40, schrieb Tom Rini:
On Wed, Mar 04, 2015 at 08:42:58AM +0100, Heiko Schocher wrote:
Hello Tom,
Am 02.03.2015 14:59, schrieb Tom Rini:
On Mon, Mar 02, 2015 at 07:56:41AM +0100, Heiko Schocher wrote:
Hello Simon,
Am 24.02.2015 14:31, schrieb Simon Glass:
Hi
The controller's Reed-Solomon ECC hardware is
used except of course for raw reads and writes.
It covers in- and out-of-band data together.
The SPL framework is supported.
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3: None
Changes in v2: None
This series extends functionality for the LPC32xx platform and
introduces the WORK Microwave work_92105 board which makes use
of the extended functionality.
NOTES:
A - I2C driver remains non-DM
During v2 review, it was suggested to move to DM for I2C. However,
this caused issues with the
On Wed, 2015-03-04 at 16:18 +0200, Siarhei Siamashka wrote:
On Tue, 03 Mar 2015 08:31:17 +
Ian Campbell ijc+ub...@hellion.org.uk wrote:
On Sun, 2015-03-01 at 23:37 +0200, Siarhei Siamashka wrote:
On Fri, 27 Feb 2015 16:39:45 +
Ian Campbell ijc+ub...@hellion.org.uk wrote:
The FSP release version 001 for Intel Queensbay has a bug which
could cause random endless loop during the FspInit call. This bug
was published by Intel although Intel did not describe any details.
Describe this information in the x86 doc so that U-Boot Queensbay
support is invulnerable.
Hi Vivek,
On 25 February 2015 at 00:54, Vivek Gautam gautamvivek1...@gmail.com wrote:
Hi Simon,
On Tue, Feb 24, 2015 at 10:17 PM, Simon Glass s...@chromium.org wrote:
Hi Vivek,
On 18 February 2015 at 06:30, Vivek Gautam gautamvivek1...@gmail.com wrote:
Hi Simon,
On Wed, Feb 18, 2015 at
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 9 +
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 7 +
arch/arm/include/asm/arch-lpc32xx/config.h| 3 +
Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
- EEPROM (24M01-compatible)
- RTC (DS1374-compatible)
- Temperature sensor (DS620)
- DACs (2 x
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3:
- remove script/Makefile.spl change
Changes in v2:
- move boot image generation to mkimage framework
common/image.c | 1 +
include/image.h | 1 +
tools/Makefile | 1 +
tools/lpc32xximage.c |
This driver only supports Driver Model, not legacy model.
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3:
- move DM dependency constraint into Kconfig
- move regs pointer and function cache into private struct
- discourage readers from using functions
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 11 ++
arch/arm/include/asm/arch-lpc32xx/clk.h | 4 +
arch/arm/include/asm/arch-lpc32xx/cpu.h | 2 +
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3:
- move regs and functions in private struct
Changes in v2:
- added MUX setting for SSP0
arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 14 +++
arch/arm/include/asm/arch-lpc32xx/clk.h | 3 +
Signed-off-by: Albert ARIBAUD (3ADEV) albert.arib...@3adev.fr
---
Changes in v3: None
Changes in v2:
- cosmetic: added a blank line before copyright
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ds620.c | 65 ++
include/dtt.h | 15
On 19 February 2015 at 00:41, Heiko Schocher h...@denx.de wrote:
Hello Simon,
Am 18.02.2015 22:10, schrieb Simon Glass:
This strdup() is missing a check. Add it.
Signed-off-by: Simon Glass s...@chromium.org
---
drivers/i2c/i2c-uclass.c | 2 ++
1 file changed, 2 insertions(+)
Good
On 24 February 2015 at 06:34, Simon Glass s...@chromium.org wrote:
On 24 February 2015 at 01:03, Masahiro Yamada yamad...@jp.panasonic.com
wrote:
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS
Hi Bin,
On 25 February 2015 at 01:20, Bin Meng bmeng...@gmail.com wrote:
Hi Simon,
On Thu, Feb 19, 2015 at 5:10 AM, Simon Glass s...@chromium.org wrote:
These are missing a size value. Add one in each case.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/sandbox/dts/sandbox.dts |
-Original Message-
From: Wood Scott-B07421
Sent: Thursday, March 05, 2015 2:41 AM
To: Bansal Aneesh-B39320
Cc: u-boot@lists.denx.de; Sun York-R58495; Gupta Ruchika-R66431
Subject: Re: [U-Boot, 1/2, v4] powerpc/mpc85xx: SECURE BOOT- NAND
secure boot target for P3041
On Thu,
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510 mmc init
CM-A510 mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit
In reference to peripherals,
On 02/03/2015 18:14, Fabio Estevam wrote:
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
Unknown
On 02/03/2015 18:14, Fabio Estevam wrote:
Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
Unknown
Hi Gabriel,
On 03/04/2015 10:18 AM, Gabriel Dobato wrote:
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510 mmc init
CM-A510 mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Currently buildman crashes when fetching i386 toolchain from
kernel.org.
solution:
- first check, if the directory in which buildman will search exists
- second, pass a string not a list of strings when instantiating
a Toolchain object
Signed-off-by: Heiko Schocher h...@denx.de
---
Tried to
On Tue, 2015-03-03 at 16:40 -0700, Simon Glass wrote:
Hi Ian,
On 3 March 2015 at 01:36, Ian Campbell ijc+ub...@hellion.org.uk wrote:
On Sun, 2015-03-01 at 09:33 -0700, Simon Glass wrote:
Since we will use these bindings on sunxi, bring them in from Linux
4.0-rc1.
Signed-off-by: Simon
On Tue, 2015-03-03 at 16:40 -0700, Simon Glass wrote:
+CONFIG_DM_ETH=y
Also remove SUNXI_GMAC from CONFIG_SYS_EXTRA_OPTIONS?
Do you mean move it to Kconfig? I did not do that, no. We can't just
remove it since we need the gmac for everything to work. But maybe I
am misunderstanding
This patch suppress following warning:
board/samsung/common/board.c:95:32: warning: iteration 4u invokes undefined
behavior [-Waggressive-loop-optimizations]
addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
^
board/samsung/common/board.c:94:2: note:
This patch add support for Wexler TAB7200 tablet.
The Wexler TAB7200 is a A20 based tablet with 7 inch display(800x480),
capacitive touchscreen(5 fingers), 1G RAM, 4G NAND, micro SD card slot,
mini HDMI port, 3.5mm audio plug, 1 USB OTG port and 1 USB 2.0 port.
Signed-off-by: Aleksei Mamlin
I tried the following:
armdev@armdev-vm:~/Development/u-boot-2015.01$ export ARCH=arm
armdev@armdev-vm:~/Development/u-boot-2015.01$ export
CROSS_COMPILE=/opt/OSELAS.Toolchain-trunk/arm-v4t-linux-gnueabi/gcc-4.1.2-glibc-2.5-binutils-2.17-kernel-2.6.18/bin/arm-v4t-linux-gnueabi-
From: Franck Jullien franck.jull...@gmail.com
Mass storage is not necessary present on interface 0. This
patch allow usb_stor_scan to look in every available interface.
Signed-off-by: Franck Jullien franck.jull...@gmail.com
---
common/usb_storage.c | 32 +---
1
2015-03-03 23:28 GMT+01:00 Marek Vasut ma...@denx.de:
On Tuesday, March 03, 2015 at 10:17:11 PM, franck.jull...@gmail.com wrote:
From: Franck Jullien franck.jull...@gmail.com
Mass storage is not necessary present on interface 0. This
patch allow usb_stor_scan to look in every available
Hi,
Anyone has any comments on this? Please share your thoughts.
Thanks and best regards,
Codrin
-Original Message-
From: Codrin Ciubotariu [mailto:codrin.ciubota...@freescale.com]
Sent: Friday, February 13, 2015 2:48 PM
To: u-boot@lists.denx.de
Cc: Sun York-R58495; Ciubotariu
Hi Hannes,
On 03/03/2015 12:31 PM, Hannes Petermaier wrote:
+Anatolij, Nikita
Hi,
Hi,
many thanks for response.
On 2 March 2015 at 03:12, Hannes Petermaier
hannes.peterma...@br-automation.com wrote:
Hello everybody,
A short question about lcd-console:
Today u-boot only supports a
Freescale boards are currently all defined in arch/arm/Kconfig, which
makes them hard to detect.
Moreover the MX6 SoC variant (Q, D, DL, S, SL) selection is currently
done via the SYS_EXTRA_OPTIONS option which marked as deprecated.
Move to a more standard way to select sub-architecture and board
Add basic SECO MX6Q/uQ7 board support (Ethernet, UART, SD are supported).
It also adds a Kconfig skeleton to later add more SECO board (supporting
SoC and board variants).
Signed-off-by: Boris Brezillon boris.brezil...@free-electrons.com
---
arch/arm/cpu/armv7/mx6/Kconfig| 11 +++
IMX_CONFIG is currently passed via the SYS_EXTRA_OPTIONS which is marked
as deprecated.
Add a new Kconfig file under arch/arm/imx-common and define the
IMX_CONFIG Kconfig in there.
Each board is supposed to provide a default value pointing to the
appropriate imximage.cfg file.
Signed-off-by:
Hello,
This series adds a preliminary support for SECO's iMX6 based boards.
The first 2 patches add generic support for MX6 SoCs, avoiding the need
to define SoC variant and imximage.cfg file patch in the deprecated
SYS_EXTRA_OPTIONS Kconfig option.
The last patch adds basic support for the
On 4 March 2015 at 00:46, Simon Glass s...@chromium.org wrote:
Hi Michal,
On 2 March 2015 at 04:25, Michal Suchanek hramr...@gmail.com wrote:
Hello,
On 18 February 2015 at 06:24, Michal Suchanek hramr...@gmail.com wrote:
On 18 February 2015 at 03:27, Simon Glass s...@chromium.org wrote:
Hi
On 04/03/15 18:54, Lukasz Majewski wrote:
This patch suppress following warning:
board/samsung/common/board.c:95:32: warning: iteration 4u invokes undefined
behavior [-Waggressive-loop-optimizations]
addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
^
On 04/03/15 01:24, Przemyslaw Marczak wrote:
Move the configs listed below from exynos5-dt-common.h to exynos5-common.h:
- CONFIG_POWER
- CONFIG_POWER_I2C
fixes build break for Arndale and Smdk5250 boards.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
---
From: Franck Jullien franck.jull...@gmail.com
Mass storage is not necessary present on interface 0. This
patch allow usb_stor_scan to look in every available interface.
Signed-off-by: Franck Jullien franck.jull...@gmail.com
---
v2: create a new function to improve indentation
Dear Tom,
The following changes since commit 19e5118d1c4c9bd2dc9e52355774c8ea73839b5b:
mpc837xerdb: fix Calling __hwconfig without a buffer warning (2015-03-02
15:11:36 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-samsung
for you to fetch changes up to
The following changes since commit 19e5118d1c4c9bd2dc9e52355774c8ea73839b5b:
mpc837xerdb: fix Calling __hwconfig without a buffer warning (2015-03-02
15:11:36 -0500)
are available in the git repository at:
http://git.denx.de/u-boot-samsung
for you to fetch changes up to
Hi,
On 04/03/15 21:19, Przemyslaw Marczak wrote:
Hello Minkyu,
On 02/17/2015 02:50 PM, Przemyslaw Marczak wrote:
Since more than one board requires memory reservation
for the secure firmware, the reservation code can be
made in a common code.
Now, to reserve some part of the the last
1 - 100 of 163 matches
Mail list logo