michaelvv wrote:
> Hi Triode...
>
> Is not dependent on sample rate, does not matter whatever
> i play 16/44 or 24/48 stuff...
>
> When it stops playing , i have to restart the SOA, I can not
> reset my HDMI splitter nor restart the squeezelite service.
>
> I have updated everything from the w
sbp wrote:
> Hi I have seen this a few times also during development of piCorePlayer,
> it is caused because it is running out of space on the card, and
> therefore the last file is not untarred.
>
Witch partition is to small, the FAT32 or the rootfs ?
The piCore image makes a 20 mB fat32 part
SamS wrote:
> Steen, just FYI, I can never do the web upgrade. Even after a complete
> reformat/re-image. What could be causing this?
>
> I get all the correct prompts through the interface, files download and
> it says success. I get all the way to "Reboot and you will have 1.17a".
> When I
Dear All,
i have some question and hope u guys can probably help.
I am using NAS as media source storing all my music, recently get the pi
B+ for the use of pCP, afterwards, some setups and finally the pi b+
works fine.
My question here is, i can control the LMS via web GUI only. whenever i
use
Greg Erskine wrote:
> Hi SamS,
>
> I think the file containing the version number is sometimes not updated.
> So, 1.16a stills reads as 1.16 and the same for 1.17.
>
> Also, I think at one stage the download could fail, but was still
> reported as a successful download. The code has been update
SamS wrote:
> Steen, just FYI, I can never do the web upgrade. Even after a complete
> reformat/re-image. What could be causing this?
>
> I get all the correct prompts through the interface, files download and
> it says success. I get all the way to "Reboot and you will have 1.17a".
> When I
> I did as you suggested and it has changed the error. Files appear to
> play but there is no sound and brutefir.log now shows the following on
> each track.
>
> Any suggestions...
>
>
> brutefirwrapper rev 12 starting at 1408808980 2014-08-23
> 15:49:40
> Resampling brutefir filter fr
Howardyiu wrote:
> Hey pnaga, what u use to configure the lms, finally. I got inspired by u
> guys, I try setting the lms server ip in the squeezelite, it (player)
> show up in the web based lms, but still can't find in the lms apps,
> another problem, USB setting can't make it, can u guys share
Steen, just FYI, I can never do the web upgrade. Even after a complete
reformat/re-image. What could be causing this?
I get all the correct prompts through the interface, files download and
it says success. I get all the way to "Reboot and you will have 1.17a".
When I reboot, I'm always still
Howardyiu wrote:
> Oh my god, thanks, I did it, I can listen from the speaker finally,, one
> very last question, why I can't see the player and control through the
> squeezebox apps? The official squeezebox apps, orange squeeze Both
> can't find the player, u know why? Steen
I Think that yo
I have a feeling my linux nobbishness is the thing holding me back.
I've sudo vi bootlocal.sh and used 'o' to insert the line then ':x' to
save it.
I've then sudo filetool.sh b and it still disappears.
I feel I'm so close guys what am I doing wrong?
sbp wrote:
> Ok, now you have a working setup.
>
>
> First choose USB as output, press submit.
> then on the squeezelite settings page, Press the button "list available
> alsa devices".
> next choose from the drop down list.
> Finally, from the "main" page choose "restart squeezelite"
>
> ste
Howardyiu wrote:
> Actually, I Dun know any command... I just get this done all by the web
> ui. And I m hoping someone to give me setting guide to get my USB Dac
> work
Ok, now you have a working setup.
then on the squeezelite settings page, Press the button "list available
alsa devices".
n
Ok so even using filetool, bootlocal is not persisitent. Any ideas?
Murphyprecht's Profile: http://forums.slimdevices.com/member.php?userid=63254
View this thread: http://forums.slimdevices.com/showthread.php?t=101269
mimax wrote:
> First of all, many thanks to Triode for the great work, I really
> appreciate.
> I was using CSOS since a while, and wanted to try SOA as Substitute.
>
> Getting to the reason I reply to Bobs post, I finally got brutefirDRC
> working today, after a week of trying, I finally figure
ah! the line "sudo /mnt/mmcblk0p2/tce/readsq.py" in bootlocal.sh doesn't
remain.
Back to google I think ;)
Murphyprecht's Profile: http://forums.slimdevices.com/member.php?userid=63254
View this thread: http://forums.slimd
I couldn't get it working either and I do have it hooked up to my TV,
The process stops abruptly with just the tc@box login.
I've tried the suggestion our German friend offered but my German is
more than a little patchy, he said;
"I've tried the Image of Wired Charlie. Unfortunately, I can not ge
Actually, I Dun know any command... I just get this done all by the web
ui. And I m hoping someone to give me setting guide to get my USB Dac
work
Howardyiu's Profile: http://forums.slimdevices.com/member.php?userid=631
sevi_at wrote:
> Hy,
> this weekend i read a lot in this forum and now i have more detail with
> which squeezebox-professionals here i have to do. very productive
> contributions, I am smitten THX!
> to solve my issue:
>
> issue 1) -sound like "miky mouse" or "barry brown"-
> -> i remove pulse a
Howardyiu wrote:
> I Hv reset the b+ and del all setting, choosing analog out, and it
> works. However it's high noise...big siisiii sound. And I m now
> figuring how to use with USB Dac, as when I choose USB out, can't detect
> the player... any idea?
Yes, you are right, the noise level is te
I Hv reset the b+ and del all setting, choosing analog out, and it
works. However it's high noise...big siisiii sound. And I m now
figuring how to use with USB Dac, as when I choose USB out, can't detect
the player... any idea?
--
freeomega wrote:
> Hi there,
>
> First of all, I just want to let you know that piCoPlayer is awesome.
> Thanks for such a great work! Also, thanks for adding support for the
> B+.
>
> I was wondering if anybody have the analog out audio working on their
> B+?
>
> If I select "Analog Audio
Squeezy:
A command-line utility for controlling squeezebox network audio
players via their squeezeserver.
https://github.com/pssc/squeezy/releases/tag/0.24
New commands for checking connection to players and alarms thanks to
D.J
Added new testing functionality in the shape of -if_ with the a
23 matches
Mail list logo