AW: Can't Define DEP Exception On Windows

[Epperlein, Lutz (agendo) via 4D_Tech]

Two things I see:

The first one, the Windows Server 2008 will not be supported anymore by 
Microsoft from the beginning of the next year. So it would be a very good idea 
to update the server OS, if someone will need it for production use (or even in 
other cases too).

And for the second, you don't need add such DEP exceptions anymore with newer 
versions of 4D. I don't remember which versions don't need this anymore, I 
think it started with version 4D v13.

Regards
Lutz

-Ursprüngliche Nachricht-
Von: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] Im Auftrag von Ken Eyring 
via 4D_Tech
Betreff: Can't Define DEP Exception On Windows

Hi Everyone,

I have a customer who has a Windows 2008 R2 Server.  I had 4D v12.5 
installed on the machine and added 4D Server and 4D Client v12 as DEP 
exceptions.  These ran with no problems for many years.  I want to 
update the 4D software on the same machine to v15.4 and when I attempt 
to add the 4D Server v15.4 and 4D Client v15.4 applications to the DEP 
exceptions list, Windows displays the following message:

 "This program must run with data execution prevention (DEP) 
enabled.  You cannot turn off DEP for this program."

I'm wondering if the 4D v15.4 applications will run properly without the 
DEP exception, or if there is something that I need to configure in 
order to allow DEP exceptions to be added for the 4D Server v15.4 and 4D 
Client v15.4 applications.

Any suggestions would be very much appreciated.

Thank you,
Ken Eyring
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Can't Define DEP Exception On Windows

[Charles Miller via 4D_Tech]

Also why are you not running last version of 15 which I think is 15.6

Regards

Chuck

On Tue, Dec 10, 2019 at 7:49 PM Ken Eyring via 4D_Tech <4d_tech@lists.4d.com>
wrote:

> Hi Everyone,
>
> I have a customer who has a Windows 2008 R2 Server.  I had 4D v12.5
> installed on the machine and added 4D Server and 4D Client v12 as DEP
> exceptions.  These ran with no problems for many years.  I want to
> update the 4D software on the same machine to v15.4 and when I attempt
> to add the 4D Server v15.4 and 4D Client v15.4 applications to the DEP
> exceptions list, Windows displays the following message:
>
>  "This program must run with data execution prevention (DEP)
> enabled.  You cannot turn off DEP for this program."
>
> I'm wondering if the 4D v15.4 applications will run properly without the
> DEP exception, or if there is something that I need to configure in
> order to allow DEP exceptions to be added for the 4D Server v15.4 and 4D
> Client v15.4 applications.
>
> Any suggestions would be very much appreciated.
>
> Thank you,
> Ken Eyring
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

-- 
-
 Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064
 Informed Solutions, Inc.
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D, Sybase & SQL Server connectivity
  https://www.informed-solutions.com
-
This message and any attached documents contain information which may be
confidential, subject to privilege or exempt from disclosure under
applicable law.  These materials are intended only for the use of the
intended recipient. If you are not the intended recipient of this
transmission, you are hereby notified that any distribution, disclosure,
printing, copying, storage, modification or the taking of any action in
reliance upon this transmission is strictly prohibited.  Delivery of this
message to any person other than the intended recipient shall not
compromise or waive such confidentiality, privilege or exemption from
disclosure as to this communication.
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

AW: HTTP Upload file size too low

[Epperlein, Lutz (agendo) via 4D_Tech]

The thing with file upload seems to be a bit strange ...

I did some tests and upload a file with size 888.3 MB, no problem.
Another test with a larger file with size 4.4G didn't work. Only a chunk of 
334.9 MB (to be exact: 351255546 bytes) was handled. I'm not able to explain 
this behavior.

Regards 
Lutz

-Ursprüngliche Nachricht-
Von: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] Im Auftrag von Jim Labos - 
infobase via 4D_Tech
Betreff: HTTP Upload file size too low

Settings for Web Option is at the max limit. However the largest file size I
can receive is around 600mb. The limit should be aprox. 2gb.

Same limit on v13 or v15. "WEB GET BODY PART" will receive zero bytes when
file is over aprox. 600mb. I have not done this kind of coding in years but
I recall testing uploads in the gb range with no problem. 

Any clues? Thanks.

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: AW: Can't Define DEP Exception On Windows

[Ken Eyring via 4D_Tech]

The company is content to be using Windows Server 2008 for now, so 
that's not my call.  I expect they'll update it if it becomes an issue.


Thank you for letting me know that DEP exceptions are no longer needed. 
That takes a load off of my mind!


Best regards,
Ken



On 12/11/19 05:14 PM, Epperlein, Lutz (agendo) via 4D_Tech wrote:

Two things I see:

The first one, the Windows Server 2008 will not be supported anymore by 
Microsoft from the beginning of the next year. So it would be a very good idea 
to update the server OS, if someone will need it for production use (or even in 
other cases too).

And for the second, you don't need add such DEP exceptions anymore with newer 
versions of 4D. I don't remember which versions don't need this anymore, I 
think it started with version 4D v13.

Regards
Lutz

-Ursprüngliche Nachricht-
Von: 4D_Tech [mailto:4d_tech-boun...@lists.4d.com] Im Auftrag von Ken Eyring 
via 4D_Tech
Betreff: Can't Define DEP Exception On Windows

Hi Everyone,

I have a customer who has a Windows 2008 R2 Server.  I had 4D v12.5
installed on the machine and added 4D Server and 4D Client v12 as DEP
exceptions.  These ran with no problems for many years.  I want to
update the 4D software on the same machine to v15.4 and when I attempt
to add the 4D Server v15.4 and 4D Client v15.4 applications to the DEP
exceptions list, Windows displays the following message:

  "This program must run with data execution prevention (DEP)
enabled.  You cannot turn off DEP for this program."

I'm wondering if the 4D v15.4 applications will run properly without the
DEP exception, or if there is something that I need to configure in
order to allow DEP exceptions to be added for the 4D Server v15.4 and 4D
Client v15.4 applications.

Any suggestions would be very much appreciated.

Thank you,
Ken Eyring
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**


**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Can't Define DEP Exception On Windows

[Ken Eyring via 4D_Tech]

I did not upgrade to 15.6 because 15.4 was working fine.  I tend to 
stick with a point version unless it has issues.


Thanks,
Ken



On 12/11/19 08:41 PM, Charles Miller via 4D_Tech wrote:

Also why are you not running last version of 15 which I think is 15.6

Regards

Chuck

On Tue, Dec 10, 2019 at 7:49 PM Ken Eyring via 4D_Tech <4d_tech@lists.4d.com>
wrote:


Hi Everyone,

I have a customer who has a Windows 2008 R2 Server.  I had 4D v12.5
installed on the machine and added 4D Server and 4D Client v12 as DEP
exceptions.  These ran with no problems for many years.  I want to
update the 4D software on the same machine to v15.4 and when I attempt
to add the 4D Server v15.4 and 4D Client v15.4 applications to the DEP
exceptions list, Windows displays the following message:

  "This program must run with data execution prevention (DEP)
enabled.  You cannot turn off DEP for this program."

I'm wondering if the 4D v15.4 applications will run properly without the
DEP exception, or if there is something that I need to configure in
order to allow DEP exceptions to be added for the 4D Server v15.4 and 4D
Client v15.4 applications.

Any suggestions would be very much appreciated.

Thank you,
Ken Eyring
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**



**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: High Sierra or Mojave?

[Bernd Fröhlich via 4D_Tech]

Doug Hall:

> I want to stay
> relatively close to the latest OS, but I'm a bit weary of the security
> measures Apple is imposing on Mojave/Catalina.

Mojave runs fine over here.
I would stay away from Catalina for some more months.

Greetings from Germany,
Bernd Fröhlich
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Can't Define DEP Exception On Windows

[Jeffrey Kain via 4D_Tech]

Hey Ken  -

DEP hasn't been an issue for a very long time, unless you have some old plug-in 
that's requiring it. I thought it was since v11 or maybe even v2004... for sure 
v15 doesn't need it.

> On Dec 10, 2019, at 7:48 PM, Ken Eyring via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> Hi Everyone,
> 
> I have a customer who has a Windows 2008 R2 Server.  I had 4D v12.5 installed 
> on the machine and added 4D Server and 4D Client v12 as DEP exceptions.  
> These ran with no problems for many years.  I want to update the 4D software 
> on the same machine to v15.4 and when I attempt to add the 4D Server v15.4 
> and 4D Client v15.4 applications to the DEP exceptions list, Windows displays 
> the following message:
> 
>"This program must run with data execution prevention (DEP) enabled.  You 
> cannot turn off DEP for this program."
> 
> I'm wondering if the 4D v15.4 applications will run properly without the DEP 
> exception, or if there is something that I need to configure in order to 
> allow DEP exceptions to be added for the 4D Server v15.4 and 4D Client v15.4 
> applications.

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: High Sierra or Mojave?

[Jeffrey Kain via 4D_Tech]

There's really no need for Catalina in my opinion. No big improvements, lots 
more headaches... 

The phrase macOS's Vista is pretty appropriate... :)

> On Dec 10, 2019, at 8:31 PM, John DeSoi via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> Mohave works fine with 4D 17 including Mac Mini configurations older than 
> 2014. Catalina will be another story...

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Can't Define DEP Exception On Windows

[Ken Eyring via 4D_Tech]

Thanks Jeff!


On 12/11/19 09:45 PM, Jeffrey Kain via 4D_Tech wrote:

Hey Ken  -

DEP hasn't been an issue for a very long time, unless you have some old plug-in 
that's requiring it. I thought it was since v11 or maybe even v2004... for sure 
v15 doesn't need it.


On Dec 10, 2019, at 7:48 PM, Ken Eyring via 4D_Tech <4d_tech@lists.4d.com> 
wrote:

Hi Everyone,

I have a customer who has a Windows 2008 R2 Server.  I had 4D v12.5 installed 
on the machine and added 4D Server and 4D Client v12 as DEP exceptions.  These 
ran with no problems for many years.  I want to update the 4D software on the 
same machine to v15.4 and when I attempt to add the 4D Server v15.4 and 4D 
Client v15.4 applications to the DEP exceptions list, Windows displays the 
following message:

"This program must run with data execution prevention (DEP) enabled.  You cannot 
turn off DEP for this program."

I'm wondering if the 4D v15.4 applications will run properly without the DEP 
exception, or if there is something that I need to configure in order to allow 
DEP exceptions to be added for the 4D Server v15.4 and 4D Client v15.4 
applications.


**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**


**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: High Sierra or Mojave?

[Doug Hall via 4D_Tech]

Thanks guys! That's what I wanted to hear.

On Wed, Dec 11, 2019 at 8:50 AM Jeffrey Kain via 4D_Tech <
4d_tech@lists.4d.com> wrote:

> There's really no need for Catalina in my opinion. No big improvements,
> lots more headaches...
>
> The phrase macOS's Vista is pretty appropriate... :)
>
> > On Dec 10, 2019, at 8:31 PM, John DeSoi via 4D_Tech <
> 4d_tech@lists.4d.com> wrote:
> >
> > Mohave works fine with 4D 17 including Mac Mini configurations older
> than 2014. Catalina will be another story...
>
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: PRINT SETTINGS Not setting OK to 1

[John J Foster via 4D_Tech]

Hi All,

So it appears that my client (in Michigan) and I (in Seattle) with running the 
current versions of Windows 10 Pro and 4D v17.2 64-bit are the only developers 
experiencing this issue?

4D Tech Support do you have any ideas? Suggestions? Seen the issue?

I looked at 4D v17.3 64-bit but there were mention of fixed issues in that 
version so I couldn’t check to see.

Really need help to know how to fix this.

Thanks,
John…


 
> Hi All,
> 
> We are running 4D v17.2 64-bit on Windows 10 pro and we have noticed that…
> 
> PRINT SETTINGS is Not setting OK to 1
> 
> And thus code and pronging is not happening.
> 
> I’m not sure if it’s everywhere or just in the single method?
> 
> Nothing fancy about the code:
> 
> QUERY([Reports];[Reports]Rep Set ID_fk=aiSetIndex{asRptName})
> 
> PRINT SETTINGS
> If (OK=1)
>   ThermoTitle:="Running "+String(Records in selection([Reports]))+" Auto 
> Report(s)…"
> 
> The Windows Printer no matter which choice of physical printer or PDF it 
> always returns zero.
> 
> I searched the NUG archive and this was a problem many years ago. Anyone else 
> seeing it?
> 
> A fix?
> 
> Thanks,
> John…
> 
> 

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: PRINT SETTINGS Not setting OK to 1

[Dennis, Neil via 4D_Tech]

> So it appears that my client (in Michigan) and I (in Seattle) with running 
> the current versions of
> Windows 10 Pro and 4D v17.2 64-bit are the only developers experiencing this 
> issue?

I tested with 4D v17R6... Windows 10 64bit

OK is set to 1 for me.

Are you saying this comes back as zero for you?

ok:=0
PRINT SETTINGS
ALERT(String(ok))

Neil





--

Privacy Disclaimer: This message contains confidential information and is 
intended only for the named addressee. If you are not the named addressee you 
should not disseminate, distribute or copy this email. Please delete this email 
from your system and notify the sender immediately by replying to this email.  
If you are not the intended recipient you are notified that disclosing, 
copying, distributing or taking any action in reliance on the contents of this 
information is strictly prohibited.

The Alternative Investments division of UMB Fund Services provides a full range 
of services to hedge funds, funds of funds and private equity funds.  Any tax 
advice in this communication is not intended to be used, and cannot be used, by 
a client or any other person or entity for the purpose of (a) avoiding 
penalties that may be imposed on any taxpayer or (b) promoting, marketing, or 
recommending to another party any matter addressed herein.
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: AW: HTTP Upload file size too low

[Jim Labos - infobase via 4D_Tech]

I seem to remember in the past there was a way to get the entire body and one
would have to parse the contents in order to delineate the part that was the
uploaded file.

Also if you do a WEB GET VARIABLES you will get an out of memory error if
the file is too large (413 - Request Entity Too Large) and the 2 arrays are
empty. I just tried it with 637,939,648 bytes (637.9MB) and that is error I
get on browser just before On Web Authentication is triggered.

The problem is that I would not know beforehand what size of document the
user will be uploading. That is why I am testing to see what the limits are.
I was prepared for the default 2GB limit but I am encountering this wall at
around 600MB.

Last week I did a few tests and I think (I wasn't paying attention as I was
just starting to dabble in the code.) I was able to do around 1.3GB. But
like I said I can't be sure as I was just picking documents randomly as I
tested the code.

I am glad to see I am not the only one getting this result. If anyone has an
explanation or solution I would certainly like to hear about it.

Thanks




-
Jim Labos - infobase
--
Sent from: http://4d.1045681.n5.nabble.com/4D-Tech-f1376241.html
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: PRINT SETTINGS Not setting OK to 1

[Tim Nevels via 4D_Tech]

On Dec 11, 2019, at 2:00 PM, John J Foster wrote:

> So it appears that my client (in Michigan) and I (in Seattle) with running 
> the current versions of Windows 10 Pro and 4D v17.2 64-bit are the only 
> developers experiencing this issue?
> 
> 4D Tech Support do you have any ideas? Suggestions? Seen the issue?
> 
> I looked at 4D v17.3 64-bit but there were mention of fixed issues in that 
> version so I couldn’t check to see.
> 
> Really need help to know how to fix this.

Hi John,

I just tested this on v17.2 64bit on macOS 10.13.6 and and OK variable 
returning 1 if you click “Print” button in the dialog and 0 if you click 
“Cancel” button.

Also tested this on v17.2 64bit on Windows 10 Home and got the same results.  
OK variable is being set correctly.

So it appears to be you and your configuration. Now you need to go into 
troubleshooting mode…

1. Are you both clicking the “Print” button in the print dialog box, or you 
pressing return key or enter key. I clicked the Print button, or clicked the 
Cancel button.

2. Have you created a new database and a method with just:

PRINT SETTINGS
TRACE

and then run that method and check the debugger for OK value? 

3. What printer driver are you and your client using? Try printing to a 
different printer. (Set the default printer at the OS level first. Then start 
4D and do the test)

4. Are either of you selecting a different printer when the dialog box is 
displayed or using the default printer that is already selected in the dialog 
box. I used the default printer. 

Reminds me of a bug reported to me many years ago by a user that I could not 
reproduce. Turned out the user was using the keyboard to initiate an action and 
it was failing. I was using the mouse and clicking a button to initiate the 
action and it worked. 

That’s all I can offer. 

Tim

*
Tim Nevels
Innovative Solutions
785-749-3444
timnev...@mac.com
*

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

match regex issue

[Chuck Miller via 4D_Tech]

Hi all,

I am finally ready to update buttons in a v17 db. The code below I think worked 
in v15 but does not seem to work in v17
$meth_txt = method text
$start_L:=1
array long integer($start_aLp;0)
array long integer($len_aL;0)
Match regex("\r(_o_ENABLE BUTTON)(\\()(.*)(\\))(.*)\r”; 
$meth_txt;$start_L;$start_aL;$len_aL)

What is wrong with my regex command.



 Chuck Miller Voice: (617) 739-0306
 Informed Solutions, Inc. Fax: (617) 232-1064   
 mailto:cjmillerinformed-solutions.com 
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D and Sybase connectivity
  http://www.informed-solutions.com  

This message and any attached documents contain information which may be 
confidential, subject to privilege or exempt from disclosure under applicable 
law.  These materials are intended only for the use of the intended recipient. 
If you are not the intended recipient of this transmission, you are hereby 
notified that any distribution, disclosure, printing, copying, storage, 
modification or the taking of any action in reliance upon this transmission is 
strictly prohibited.  Delivery of this message to any person other than the 
intended recipient shall not compromise or waive such confidentiality, 
privilege or exemption from disclosure as to this communication. 

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: PRINT SETTINGS Not setting OK to 1

[John J Foster via 4D_Tech]

Hi Tim,

Well I did fail to mention I ma running Windows 10 Pro on parallels 15.1.

But my client is also running Windows 10 Pro but on a windows only computer.

I’ll test your ideas - as always very reasonable - and let you know.

Appreciate,
John…



> On Dec 11, 2019, at 12:53 PM, Tim Nevels  wrote:
> 
> On Dec 11, 2019, at 2:00 PM, John J Foster wrote:
> 
>> So it appears that my client (in Michigan) and I (in Seattle) with running 
>> the current versions of Windows 10 Pro and 4D v17.2 64-bit are the only 
>> developers experiencing this issue?
>> 
>> 4D Tech Support do you have any ideas? Suggestions? Seen the issue?
>> 
>> I looked at 4D v17.3 64-bit but there were mention of fixed issues in that 
>> version so I couldn’t check to see.
>> 
>> Really need help to know how to fix this.
> 
> Hi John,
> 
> I just tested this on v17.2 64bit on macOS 10.13.6 and and OK variable 
> returning 1 if you click “Print” button in the dialog and 0 if you click 
> “Cancel” button.
> 
> Also tested this on v17.2 64bit on Windows 10 Home and got the same results.  
> OK variable is being set correctly.
> 
> So it appears to be you and your configuration. Now you need to go into 
> troubleshooting mode…
> 
> 1. Are you both clicking the “Print” button in the print dialog box, or you 
> pressing return key or enter key. I clicked the Print button, or clicked the 
> Cancel button.
> 
> 2. Have you created a new database and a method with just:
> 
> PRINT SETTINGS
> TRACE
> 
> and then run that method and check the debugger for OK value? 
> 
> 3. What printer driver are you and your client using? Try printing to a 
> different printer. (Set the default printer at the OS level first. Then start 
> 4D and do the test)
> 
> 4. Are either of you selecting a different printer when the dialog box is 
> displayed or using the default printer that is already selected in the dialog 
> box. I used the default printer. 
> 
> Reminds me of a bug reported to me many years ago by a user that I could not 
> reproduce. Turned out the user was using the keyboard to initiate an action 
> and it was failing. I was using the mouse and clicking a button to initiate 
> the action and it worked. 
> 
> That’s all I can offer. 
> 
> Tim
> 
> *
> Tim Nevels
> Innovative Solutions
> 785-749-3444
> timnev...@mac.com
> *
> 

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: PRINT SETTINGS Not setting OK to 1

[Tim Nevels via 4D_Tech]

On Dec 11, 2019, at 3:38 PM, John J Foster  wrote:

> Well I did fail to mention I ma running Windows 10 Pro on parallels 15.1.
> 
> But my client is also running Windows 10 Pro but on a windows only computer.
> 
> I’ll test your ideas - as always very reasonable - and let you know.

Hi John,

I’m running Windows 10 Home on Parallels 14.1.3.

Tim

*
Tim Nevels
Innovative Solutions
785-749-3444
timnev...@mac.com
*

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: PRINT SETTINGS Not setting OK to 1

[John J Foster via 4D_Tech]

Hey Tim,

So created a new db with only this code appears to work:

PRINT SETTINGS
If (OK=1)
ALERT("Print!")
Else 
ALERT("Cancelled!")
End if 

So there is something in our application that has caused this behavior.

So I’ll have to figure a way to troubleshoot.

I guess that’s progress!

Thanks Tim,
John…


> On Dec 11, 2019, at 2:03 PM, Tim Nevels  wrote:
> 
> On Dec 11, 2019, at 3:38 PM, John J Foster  wrote:
> 
>> Well I did fail to mention I ma running Windows 10 Pro on parallels 15.1.
>> 
>> But my client is also running Windows 10 Pro but on a windows only computer.
>> 
>> I’ll test your ideas - as always very reasonable - and let you know.
> 
> Hi John,
> 
> I’m running Windows 10 Home on Parallels 14.1.3.
> 
> Tim
> 
> *
> Tim Nevels
> Innovative Solutions
> 785-749-3444
> timnev...@mac.com
> *
> 

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: match regex issue

[Arnaud de Montard via 4D_Tech]

> Le 11 déc. 2019 à 21:58, Chuck Miller via 4D_Tech <4d_tech@lists.4d.com> a 
> écrit :
> 
> Hi all,
> 
> I am finally ready to update buttons in a v17 db. The code below I think 
> worked in v15 but does not seem to work in v17
> $meth_txt = method text
> $start_L:=1
> array long integer($start_aLp;0)
> array long integer($len_aL;0)
> Match regex("\r(_o_ENABLE BUTTON)(\\()(.*)(\\))(.*)\r”; 
> $meth_txt;$start_L;$start_aL;$len_aL)
> 
> What is wrong with my regex command.

Hi Chuck, 
I can't say what's wrong, regex is hard to read for me and with 4D's double \\ 
it's worse… I often develop in BBEdit, then paste in 4D to avoid this - even if 
regex engines are a bit different. 

I'd use this:
  $rx_t:="^_o_ENABLE BUTTON\\((\\*;)?(.*)\\)"

example:
  $test_c:=New collection()
  $test_c.push("_o_ENABLE BUTTON(buttonVar)")
  $test_c.push("_o_ENABLE BUTTON($var)")
  $test_c.push("_o_ENABLE BUTTON(*;\"buttonName\")")
  $test_c.push("_o_ENABLE BUTTON(*;$name)")
  $rx_t:="^_o_ENABLE BUTTON\\((\\*;)?(.*)\\)"
  ARRAY LONGINT($pos_al;0)
  ARRAY LONGINT($len_al;0)
  For each ($test_t;$test_c)
ASSERT(Match regex($rx_t;$test_t;1;$pos_al;$len_al))
  End for each 

I'm not sure the starting anchor "^" suits your case, it depends on how you 
manage the method. For my own, I always split code in lines before, then I loop 
on lines. Split string command is nice for that (too bad it's slow). 
 
-- 
Arnaud de Montard 



**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: PRINT SETTINGS Not setting OK to 1

[Tim Nevels via 4D_Tech]

On Dec 11, 2019, at 4:28 PM, John J Foster  wrote:

> So created a new db with only this code appears to work:
> 
> PRINT SETTINGS
> If (OK=1)
>   ALERT("Print!")
> Else 
>   ALERT("Cancelled!")
> End if 
> 
> So there is something in our application that has caused this behavior.
> 
> So I’ll have to figure a way to troubleshoot.
> 
> I guess that’s progress!

Hi John,

Definitely progress. 

Do a search for the “OK” variable in your code — Find in Design. See if 
somewhere you accidentally have declared it as something other than a C_LONGINT.

Long, long time ago I made the mistake of declaring some variables with names: 
“C1”, “C2”, “C3” etc. Caused problems with some Quick Reports because it uses 
these variable names for calculated columns. My declaring them overrode 4D’s 
declaration/usage.

Tim

*
Tim Nevels
Innovative Solutions
785-749-3444
timnev...@mac.com
*

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: AW: HTTP Upload file size too low

[Jim Hays via 4D_Tech]

I've been dealing with the same thing.  Uploading a zipped, built
application to a "pub" server.
I'd get different results testing on different machines.  It's said in this
thread, that ultimately the file is in a blob, and a blob needs contiguous
blocks of memory.  The state of memory could vary.  Another thread
mentioned 64-bit 4D is obviously better.

https://forums.4d.com/Post/EN/17791174/1/17800233#17800233

I ended up zipping things by folders, so I never had a file larger than 90
MB, and transferring 4D server to 4D server, all 64 bit.
Miyako also mentioned chunking the file into parts - I didn't try that.

Jim

On Wed, Dec 11, 2019 at 1:04 PM Jim Labos - infobase via 4D_Tech <
4d_tech@lists.4d.com> wrote:

> I seem to remember in the past there was a way to get the entire body and
> one
> would have to parse the contents in order to delineate the part that was
> the
> uploaded file.
>
> Also if you do a WEB GET VARIABLES you will get an out of memory error if
> the file is too large (413 - Request Entity Too Large) and the 2 arrays are
> empty. I just tried it with 637,939,648 bytes (637.9MB) and that is error I
> get on browser just before On Web Authentication is triggered.
>
> The problem is that I would not know beforehand what size of document the
> user will be uploading. That is why I am testing to see what the limits
> are.
> I was prepared for the default 2GB limit but I am encountering this wall at
> around 600MB.
>
> Last week I did a few tests and I think (I wasn't paying attention as I was
> just starting to dabble in the code.) I was able to do around 1.3GB. But
> like I said I can't be sure as I was just picking documents randomly as I
> tested the code.
>
> I am glad to see I am not the only one getting this result. If anyone has
> an
> explanation or solution I would certainly like to hear about it.
>
> Thanks
>
>
>
>
> -
> Jim Labos - infobase
> --
> Sent from: http://4d.1045681.n5.nabble.com/4D-Tech-f1376241.html
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Windows Build - STR# 10135, 18/19 Folders

[Allan Udy via 4D_Tech]

Hi John

Did you ever get to the bottom of this?

I've just had v17R6 start to do this to me under Windows 10 when I 
attempt to compile/merge engine an app that compiled perfectly fine with 
v17R5.


In my case the Server and Clients apps are in a folder called

STR# 10135, 20


Any light you can shed on this would be hugely appreciated.

Cheers
Allan


4d_tech-requ...@lists.4d.com wrote on 11/03/19 3:34 AM:

From: John J Foster
To:4D  iNug Technical<4d_tech@lists.4d.com>
Subject: Windows Build - STR# 10135,18/19  Folders

Hey All,

I couldn’t find anything in KB that explained this situation.

Windows 10 -4D  v17r4

I just noticed that the build of an engined version of my app creates two 
foldersnamed:

STR# 10135, 18 -> Appname.4dbase -> includes the .4DC/.4DIndy files
STR# 10135, 19 -> Appname -> includes executable

Is this related to the application build XML or JSON file?



Cheers,
Allan Udy

Golden Micro Solutions Ltd, Blenheim, New Zealand
http://www.golden.co.nz

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**