Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-18 Thread Josh Luthman via Af 
With Epmp?  Canopy?  No ipv6.  Technically ubnt kinda has ipv6.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 18, 2014 6:47 PM, "Dave White via Af"  wrote:

>  Could ipv6 be used instead of rtables?
>
> DaveW
>
>
> On 12/17/2014 3:42 PM, Mark Radabaugh via Af wrote:
>
> Virtual Routing Instances:
>
>
> http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/
>
> Mark
>
> On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
>
> How exactly does that work?  Not familiar with Soekris.  My issue is
> having the same IP on 7 interfaces talking to the same IP on each said
> interface.
>
>
>  Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh via Af 
> wrote:
>
>> We finally got around to building a 8 port "SM Programmer" out of a
>> Soekris board and OpenBSD.It has 7 Ethernet ports on the front.  Plug a
>> SM with a default plug in and of the 7 ports and it blows all the template
>> onto it and lets you know when it's done.
>>
>> Saves a lot of time for inside guys and avoids a whole lot of minor
>> configuration errors that frustrate everyone.  Now they all go out the door
>> right (or all wrong).
>>
>> Of course right after we got around to writing it Cambium finally got
>> around to the text configuration file :-)
>>
>> Mark
>>
>>
>> On 12/17/14, 5:20 PM, Matt via Af wrote:
>>
>>> Will try to strip our stuff out, clean them up a bit and post an
>>> example when I get a chance.  There pretty ugly right now.
>>>
>>>  I love a copy of these scripts, too!  More compensation available.  :-)

 DaveW

 On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

 would you care to share your scripts matt?

 i'd be glad to buy beers or other compensation.  our guys have been
 asking
 for an easy way to do all this and i've been too busy to build the
 scripts
 myself.

 -sean





>>   --
>> Mark Radabaugh
>> Amplex
>>
>> m...@amplex.net  419.837.5015 x 1021 <419.837.5015%20x%201021>
>>
>>
>
>
> --
> Mark Radabaugh
> Amplex
> m...@amplex.net  419.837.5015 x 1021
>
>
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-18 Thread Dave White via Af 

Could ipv6 be used instead of rtables?

DaveW


On 12/17/2014 3:42 PM, Mark Radabaugh via Af wrote:

Virtual Routing Instances:

http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/

Mark

On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
How exactly does that work?  Not familiar with Soekris.  My issue is 
having the same IP on 7 interfaces talking to the same IP on each 
said interface.



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh via Af > wrote:


We finally got around to building a 8 port "SM Programmer" out of
a Soekris board and OpenBSD.It has 7 Ethernet ports on the
front.  Plug a SM with a default plug in and of the 7 ports and
it blows all the template onto it and lets you know when it's done.

Saves a lot of time for inside guys and avoids a whole lot of
minor configuration errors that frustrate everyone. Now they all
go out the door right (or all wrong).

Of course right after we got around to writing it Cambium finally
got around to the text configuration file :-)

Mark


On 12/17/14, 5:20 PM, Matt via Af wrote:

Will try to strip our stuff out, clean them up a bit and post an
example when I get a chance.  There pretty ugly right now.

I love a copy of these scripts, too!  More compensation
available.  :-)

DaveW

On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

would you care to share your scripts matt?

i'd be glad to buy beers or other compensation. our guys
have been asking
for an easy way to do all this and i've been too busy to
build the scripts
myself.

-sean





-- 
Mark Radabaugh

Amplex

m...@amplex.net  419.837.5015 x 1021






--
Mark Radabaugh
Amplex

m...@amplex.net   419.837.5015 x 1021

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-18 Thread Jonathan Mandziara via Af 
Any AF users out there using the “Config File” or “Zero Touch” features that 
are new to 13.3?

We would love your feedback.

Best,

Cambium Jonathan

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mark Radabaugh via Af
Sent: Wednesday, December 17, 2014 4:42 PM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?

Virtual Routing Instances:

http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/

Mark

On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
How exactly does that work?  Not familiar with Soekris.  My issue is having the 
same IP on 7 interfaces talking to the same IP on each said interface.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh via Af 
mailto:af@afmug.com>> wrote:
We finally got around to building a 8 port "SM Programmer" out of a Soekris 
board and OpenBSD.It has 7 Ethernet ports on the front.  Plug a SM with a 
default plug in and of the 7 ports and it blows all the template onto it and 
lets you know when it's done.

Saves a lot of time for inside guys and avoids a whole lot of minor 
configuration errors that frustrate everyone.  Now they all go out the door 
right (or all wrong).

Of course right after we got around to writing it Cambium finally got around to 
the text configuration file :-)

Mark


On 12/17/14, 5:20 PM, Matt via Af wrote:
Will try to strip our stuff out, clean them up a bit and post an
example when I get a chance.  There pretty ugly right now.
I love a copy of these scripts, too!  More compensation available.  :-)

DaveW

On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

would you care to share your scripts matt?

i'd be glad to buy beers or other compensation.  our guys have been asking
for an easy way to do all this and i've been too busy to build the scripts
myself.

-sean




--
Mark Radabaugh
Amplex

m...@amplex.net<mailto:m...@amplex.net>  419.837.5015 x 
1021





--

Mark Radabaugh

Amplex



m...@amplex.net<mailto:m...@amplex.net>  419.837.5015 x 1021

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-18 Thread Josh Luthman via Af 
Holy crap.  That's some neat stuff!!!  Seems pretty simple to put together
and use, too!

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 17, 2014 5:42 PM, "Mark Radabaugh via Af"  wrote:

>  Virtual Routing Instances:
>
>
> http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/
>
> Mark
>
> On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
>
> How exactly does that work?  Not familiar with Soekris.  My issue is
> having the same IP on 7 interfaces talking to the same IP on each said
> interface.
>
>
>  Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh via Af 
> wrote:
>
>> We finally got around to building a 8 port "SM Programmer" out of a
>> Soekris board and OpenBSD.It has 7 Ethernet ports on the front.  Plug a
>> SM with a default plug in and of the 7 ports and it blows all the template
>> onto it and lets you know when it's done.
>>
>> Saves a lot of time for inside guys and avoids a whole lot of minor
>> configuration errors that frustrate everyone.  Now they all go out the door
>> right (or all wrong).
>>
>> Of course right after we got around to writing it Cambium finally got
>> around to the text configuration file :-)
>>
>> Mark
>>
>>
>> On 12/17/14, 5:20 PM, Matt via Af wrote:
>>
>>> Will try to strip our stuff out, clean them up a bit and post an
>>> example when I get a chance.  There pretty ugly right now.
>>>
>>>  I love a copy of these scripts, too!  More compensation available.  :-)

 DaveW

 On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

 would you care to share your scripts matt?

 i'd be glad to buy beers or other compensation.  our guys have been
 asking
 for an easy way to do all this and i've been too busy to build the
 scripts
 myself.

 -sean





>>   --
>> Mark Radabaugh
>> Amplex
>>
>> m...@amplex.net  419.837.5015 x 1021 <419.837.5015%20x%201021>
>>
>>
>
>
> --
> Mark Radabaugh
> Amplex
> m...@amplex.net  419.837.5015 x 1021
>
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-17 Thread Mark Radabaugh via Af 
Tushar,

We do most of the programming using SNMP traps when the CPE registers.

The configuration tool we built for the office takes care of defaulting the 
unit, pushing the "Read/Write SNMP" button, sets the radios to 20Mhz (or 10Mhz 
for 3.65), sets the appropriate frequencies (no 5.4, all 5.7 skipping the 
2.5Mhz increments), checks that we have the proper software version, and 
generally gets the radio back into a known state before it goes back out the 
door.

With 5.7 the units take a lot longer to register if they have to scan 5Mhz, 
10Mhz, 20Mhz, the 5.4 and 5.7 spectrum so we turn off what we don't use.

Mark


> On Dec 17, 2014, at 8:31 PM, Tushar Patel via Af  wrote:
> 
> Mark,
> 
> I thought you had SNMP trap setup for radios and programmed dynamically?
> 
> Tushar
> 
> 
>> On Dec 17, 2014, at 4:30 PM, Mark Radabaugh via Af  wrote:
>> 
>> We finally got around to building a 8 port "SM Programmer" out of a Soekris 
>> board and OpenBSD.It has 7 Ethernet ports on the front.  Plug a SM with 
>> a default plug in and of the 7 ports and it blows all the template onto it 
>> and lets you know when it's done.
>> 
>> Saves a lot of time for inside guys and avoids a whole lot of minor 
>> configuration errors that frustrate everyone.  Now they all go out the door 
>> right (or all wrong).
>> 
>> Of course right after we got around to writing it Cambium finally got around 
>> to the text configuration file :-)
>> 
>> Mark
>> 
>>> On 12/17/14, 5:20 PM, Matt via Af wrote:
>>> Will try to strip our stuff out, clean them up a bit and post an
>>> example when I get a chance.  There pretty ugly right now.
>>> 
 I love a copy of these scripts, too!  More compensation available.  :-)
 
 DaveW
 
 On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:
 
 would you care to share your scripts matt?
 
 i'd be glad to buy beers or other compensation.  our guys have been asking
 for an easy way to do all this and i've been too busy to build the scripts
 myself.
 
 -sean
>> 
>> -- 
>> Mark Radabaugh
>> Amplex
>> 
>> m...@amplex.net  419.837.5015 x 1021
>> 
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-17 Thread Tushar Patel via Af 
Mark,

I thought you had SNMP trap setup for radios and programmed dynamically?

Tushar


> On Dec 17, 2014, at 4:30 PM, Mark Radabaugh via Af  wrote:
> 
> We finally got around to building a 8 port "SM Programmer" out of a Soekris 
> board and OpenBSD.It has 7 Ethernet ports on the front.  Plug a SM with a 
> default plug in and of the 7 ports and it blows all the template onto it and 
> lets you know when it's done.
> 
> Saves a lot of time for inside guys and avoids a whole lot of minor 
> configuration errors that frustrate everyone.  Now they all go out the door 
> right (or all wrong).
> 
> Of course right after we got around to writing it Cambium finally got around 
> to the text configuration file :-)
> 
> Mark
> 
>> On 12/17/14, 5:20 PM, Matt via Af wrote:
>> Will try to strip our stuff out, clean them up a bit and post an
>> example when I get a chance.  There pretty ugly right now.
>> 
>>> I love a copy of these scripts, too!  More compensation available.  :-)
>>> 
>>> DaveW
>>> 
>>> On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:
>>> 
>>> would you care to share your scripts matt?
>>> 
>>> i'd be glad to buy beers or other compensation.  our guys have been asking
>>> for an easy way to do all this and i've been too busy to build the scripts
>>> myself.
>>> 
>>> -sean
> 
> -- 
> Mark Radabaugh
> Amplex
> 
> m...@amplex.net  419.837.5015 x 1021
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-17 Thread Mark Radabaugh via Af 

Virtual Routing Instances:

http://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/

Mark

On 12/17/14, 5:33 PM, Josh Luthman via Af wrote:
How exactly does that work?  Not familiar with Soekris.  My issue is 
having the same IP on 7 interfaces talking to the same IP on each said 
interface.



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh via Af > wrote:


We finally got around to building a 8 port "SM Programmer" out of
a Soekris board and OpenBSD.It has 7 Ethernet ports on the
front.  Plug a SM with a default plug in and of the 7 ports and it
blows all the template onto it and lets you know when it's done.

Saves a lot of time for inside guys and avoids a whole lot of
minor configuration errors that frustrate everyone.  Now they all
go out the door right (or all wrong).

Of course right after we got around to writing it Cambium finally
got around to the text configuration file :-)

Mark


On 12/17/14, 5:20 PM, Matt via Af wrote:

Will try to strip our stuff out, clean them up a bit and post an
example when I get a chance.  There pretty ugly right now.

I love a copy of these scripts, too!  More compensation
available.  :-)

DaveW

On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

would you care to share your scripts matt?

i'd be glad to buy beers or other compensation.  our guys
have been asking
for an easy way to do all this and i've been too busy to
build the scripts
myself.

-sean





-- 
Mark Radabaugh

Amplex

m...@amplex.net  419.837.5015 x 1021






--
Mark Radabaugh
Amplex

m...@amplex.net  419.837.5015 x 1021

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-17 Thread Josh Luthman via Af 
How exactly does that work?  Not familiar with Soekris.  My issue is having
the same IP on 7 interfaces talking to the same IP on each said interface.


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Wed, Dec 17, 2014 at 5:30 PM, Mark Radabaugh via Af  wrote:

> We finally got around to building a 8 port "SM Programmer" out of a
> Soekris board and OpenBSD.It has 7 Ethernet ports on the front.  Plug a
> SM with a default plug in and of the 7 ports and it blows all the template
> onto it and lets you know when it's done.
>
> Saves a lot of time for inside guys and avoids a whole lot of minor
> configuration errors that frustrate everyone.  Now they all go out the door
> right (or all wrong).
>
> Of course right after we got around to writing it Cambium finally got
> around to the text configuration file :-)
>
> Mark
>
>
> On 12/17/14, 5:20 PM, Matt via Af wrote:
>
>> Will try to strip our stuff out, clean them up a bit and post an
>> example when I get a chance.  There pretty ugly right now.
>>
>>  I love a copy of these scripts, too!  More compensation available.  :-)
>>>
>>> DaveW
>>>
>>> On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:
>>>
>>> would you care to share your scripts matt?
>>>
>>> i'd be glad to buy beers or other compensation.  our guys have been
>>> asking
>>> for an easy way to do all this and i've been too busy to build the
>>> scripts
>>> myself.
>>>
>>> -sean
>>>
>>>
>>>
>>>
>>>
> --
> Mark Radabaugh
> Amplex
>
> m...@amplex.net  419.837.5015 x 1021
>
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-17 Thread Mark Radabaugh via Af 
We finally got around to building a 8 port "SM Programmer" out of a 
Soekris board and OpenBSD.It has 7 Ethernet ports on the front.  
Plug a SM with a default plug in and of the 7 ports and it blows all the 
template onto it and lets you know when it's done.


Saves a lot of time for inside guys and avoids a whole lot of minor 
configuration errors that frustrate everyone.  Now they all go out the 
door right (or all wrong).


Of course right after we got around to writing it Cambium finally got 
around to the text configuration file :-)


Mark

On 12/17/14, 5:20 PM, Matt via Af wrote:

Will try to strip our stuff out, clean them up a bit and post an
example when I get a chance.  There pretty ugly right now.


I love a copy of these scripts, too!  More compensation available.  :-)

DaveW

On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

would you care to share your scripts matt?

i'd be glad to buy beers or other compensation.  our guys have been asking
for an easy way to do all this and i've been too busy to build the scripts
myself.

-sean






--
Mark Radabaugh
Amplex

m...@amplex.net  419.837.5015 x 1021

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-17 Thread Matt via Af 
Will try to strip our stuff out, clean them up a bit and post an
example when I get a chance.  There pretty ugly right now.

> I love a copy of these scripts, too!  More compensation available.  :-)
>
> DaveW
>
> On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:
>
> would you care to share your scripts matt?
>
> i'd be glad to buy beers or other compensation.  our guys have been asking
> for an easy way to do all this and i've been too busy to build the scripts
> myself.
>
> -sean
>
>
>
> On Mon, Dec 8, 2014 at 4:07 PM, Matt via Af  wrote:
>>
>> I have perl script that programs SM's before they are labeled and go
>> to installers.  Between interruptions been fighting issues.
>>
>> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.1.1.0 s
>> all  # Set Channel Scan
>> No response.
>>
>> These also seem to not work.
>>
>> lanMaskSm
>> Object ID: 1.3.6.1.4.1.161.19.3.2.1.4
>>
>> lanIpSm
>> Object ID: 1.3.6.1.4.1.161.19.3.2.1.3
>>
>> defaultGwSm
>>  Object ID: 1.3.6.1.4.1.161.19.3.2.1.5
>>
>>
>>
>>
>>
>>
>> On Mon, Dec 8, 2014 at 4:26 PM, Jonathan Mandziara via Af 
>> wrote:
>> > Matt,
>> >
>> > Thanks!
>> >
>> > With those steps that you provided, I can see the issue that you are
>> > having.
>> >
>> > I will open an issue for this.
>> >
>> > The obvious workaround (until fixed) would be to set the IPv4 Filter
>> > after setting the IPv6 filter in your script.
>> >
>> > Best,
>> >
>> > Jonathan
>> >
>> > -Original Message-
>> > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
>> > Sent: Monday, December 08, 2014 2:53 PM
>> > To: af@afmug.com
>> > Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
>> >
>> > Further investigation.  To repeat it.
>> >
>> > First reset factory defaults to a 3.6 sm running 13.2 then reboot.
>> > Enable SNMP read/write in GUI.
>> >
>> > Then:
>> >
>> > #set IPv4 filter all
>> > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
>> >
>> > #set IPv6 filter all
>> > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1
>> >
>> > The moment you set IPv6 filter it disables the IPv4 filter.  After you
>> > do this once you cannot reproduce it without resetting defaults and
>> > rebooting again.  Seeing other SNMP issues.  Still testing.
>> >
>> >
>> >
>> >
>> >
>> > On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af 
>> > wrote:
>> >> Matt,
>> >>
>> >> We are not able to reproduce your issue.
>> >>
>> >> We have some questions for you.
>> >> Q1) Is your radio's SNMP setting set to R/W?
>> >> Q2) Is the radios' SNMP Community string set to "Canopy"?
>> >> Q3) Is the SNMP filter enabled?
>> >> Q4) Are you rebooting the SM after sending the SNMP OID?
>> >> Q5) Are you trying this to the SM over the SNMP proxy?
>> >> Q6) What is the error that snmpset provides after issuing the command?
>> >>
>> >> Best,
>> >>
>> >> Cambium Jonathan
>> >>
>> >> -Original Message-
>> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
>> >> Sent: Monday, December 08, 2014 12:01 PM
>> >> To: af@afmug.com
>> >> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
>> >>
>> >> allIpv4Filter
>> >> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
>> >>
>> >> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i
>> >> 1
>> >>
>> >> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
>> >> 13.2 and it does not seem to work.  Anyone else see an issue with it?
>> >> Setting the allipv6filter does seem to work.  This a bug?
>
>
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-15 Thread Dave White via Af 

I love a copy of these scripts, too!  More compensation available.  :-)

DaveW

On 12/8/2014 4:24 PM, Sean Heskett via Af wrote:

would you care to share your scripts matt?

i'd be glad to buy beers or other compensation.  our guys have been 
asking for an easy way to do all this and i've been too busy to build 
the scripts myself.


-sean



On Mon, Dec 8, 2014 at 4:07 PM, Matt via Af <mailto:af@afmug.com>> wrote:


I have perl script that programs SM's before they are labeled and go
to installers.  Between interruptions been fighting issues.

snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.1.1.0 s
all  # Set Channel Scan
No response.

These also seem to not work.

lanMaskSm
Object ID: 1.3.6.1.4.1.161.19.3.2.1.4

lanIpSm
Object ID: 1.3.6.1.4.1.161.19.3.2.1.3

defaultGwSm
 Object ID: 1.3.6.1.4.1.161.19.3.2.1.5






On Mon, Dec 8, 2014 at 4:26 PM, Jonathan Mandziara via Af
mailto:af@afmug.com>> wrote:
> Matt,
>
> Thanks!
>
> With those steps that you provided, I can see the issue that you
are having.
>
> I will open an issue for this.
>
> The obvious workaround (until fixed) would be to set the IPv4
Filter after setting the IPv6 filter in your script.
>
> Best,
>
> Jonathan
>
> -Original Message-
> From: Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] On Behalf Of Matt via Af
> Sent: Monday, December 08, 2014 2:53 PM
    > To: af@afmug.com <mailto:af@afmug.com>
> Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> Further investigation.  To repeat it.
>
> First reset factory defaults to a 3.6 sm running 13.2 then reboot.
> Enable SNMP read/write in GUI.
>
> Then:
>
> #set IPv4 filter all
> snmpset -v 2c -c Canopy 169.254.1.1
.1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
>
> #set IPv6 filter all
> snmpset -v 2c -c Canopy 169.254.1.1
.1.3.6.1.4.1.161.19.3.3.2.160.0 i 1
>
> The moment you set IPv6 filter it disables the IPv4 filter. 
After you do this once you cannot reproduce it without resetting

defaults and rebooting again.  Seeing other SNMP issues.  Still
testing.
>
>
>
>
>
> On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af
mailto:af@afmug.com>> wrote:
>> Matt,
>>
>> We are not able to reproduce your issue.
>>
>> We have some questions for you.
>> Q1) Is your radio's SNMP setting set to R/W?
>> Q2) Is the radios' SNMP Community string set to "Canopy"?
>> Q3) Is the SNMP filter enabled?
>> Q4) Are you rebooting the SM after sending the SNMP OID?
>> Q5) Are you trying this to the SM over the SNMP proxy?
>> Q6) What is the error that snmpset provides after issuing the
command?
>>
>> Best,
>>
>> Cambium Jonathan
>>
>> -Original Message-
>> From: Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] On Behalf Of Matt via Af
>> Sent: Monday, December 08, 2014 12:01 PM
>> To: af@afmug.com <mailto:af@afmug.com>
>> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
>>
>> allIpv4Filter
>> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
>>
>> snmpset -v 2c -c Canopy 169.254.1.1
.1.3.6.1.4.1.161.19.3.3.2.132.0 i
>> 1
>>
>> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM
running
>> 13.2 and it does not seem to work.  Anyone else see an issue
with it?
>> Setting the allipv6filter does seem to work. This a bug?

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-08 Thread Sean Heskett via Af 
would you care to share your scripts matt?

i'd be glad to buy beers or other compensation.  our guys have been asking
for an easy way to do all this and i've been too busy to build the scripts
myself.

-sean



On Mon, Dec 8, 2014 at 4:07 PM, Matt via Af  wrote:

> I have perl script that programs SM's before they are labeled and go
> to installers.  Between interruptions been fighting issues.
>
> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.1.1.0 s
> all  # Set Channel Scan
> No response.
>
> These also seem to not work.
>
> lanMaskSm
> Object ID: 1.3.6.1.4.1.161.19.3.2.1.4
>
> lanIpSm
> Object ID: 1.3.6.1.4.1.161.19.3.2.1.3
>
> defaultGwSm
>  Object ID: 1.3.6.1.4.1.161.19.3.2.1.5
>
>
>
>
>
>
> On Mon, Dec 8, 2014 at 4:26 PM, Jonathan Mandziara via Af 
> wrote:
> > Matt,
> >
> > Thanks!
> >
> > With those steps that you provided, I can see the issue that you are
> having.
> >
> > I will open an issue for this.
> >
> > The obvious workaround (until fixed) would be to set the IPv4 Filter
> after setting the IPv6 filter in your script.
> >
> > Best,
> >
> > Jonathan
> >
> > -Original Message-----
> > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
> > Sent: Monday, December 08, 2014 2:53 PM
> > To: af@afmug.com
> > Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
> >
> > Further investigation.  To repeat it.
> >
> > First reset factory defaults to a 3.6 sm running 13.2 then reboot.
> > Enable SNMP read/write in GUI.
> >
> > Then:
> >
> > #set IPv4 filter all
> > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
> >
> > #set IPv6 filter all
> > snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1
> >
> > The moment you set IPv6 filter it disables the IPv4 filter.  After you
> do this once you cannot reproduce it without resetting defaults and
> rebooting again.  Seeing other SNMP issues.  Still testing.
> >
> >
> >
> >
> >
> > On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af 
> wrote:
> >> Matt,
> >>
> >> We are not able to reproduce your issue.
> >>
> >> We have some questions for you.
> >> Q1) Is your radio's SNMP setting set to R/W?
> >> Q2) Is the radios' SNMP Community string set to "Canopy"?
> >> Q3) Is the SNMP filter enabled?
> >> Q4) Are you rebooting the SM after sending the SNMP OID?
> >> Q5) Are you trying this to the SM over the SNMP proxy?
> >> Q6) What is the error that snmpset provides after issuing the command?
> >>
> >> Best,
> >>
> >> Cambium Jonathan
> >>
> >> -Original Message-
> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
> >> Sent: Monday, December 08, 2014 12:01 PM
> >> To: af@afmug.com
> >> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
> >>
> >> allIpv4Filter
> >> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
> >>
> >> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i
> >> 1
> >>
> >> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
> >> 13.2 and it does not seem to work.  Anyone else see an issue with it?
> >> Setting the allipv6filter does seem to work.  This a bug?
>

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-08 Thread Matt via Af 
I have perl script that programs SM's before they are labeled and go
to installers.  Between interruptions been fighting issues.

snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.2.1.1.0 s
all  # Set Channel Scan
No response.

These also seem to not work.

lanMaskSm
Object ID: 1.3.6.1.4.1.161.19.3.2.1.4

lanIpSm
Object ID: 1.3.6.1.4.1.161.19.3.2.1.3

defaultGwSm
 Object ID: 1.3.6.1.4.1.161.19.3.2.1.5






On Mon, Dec 8, 2014 at 4:26 PM, Jonathan Mandziara via Af  wrote:
> Matt,
>
> Thanks!
>
> With those steps that you provided, I can see the issue that you are having.
>
> I will open an issue for this.
>
> The obvious workaround (until fixed) would be to set the IPv4 Filter after 
> setting the IPv6 filter in your script.
>
> Best,
>
> Jonathan
>
> -Original Message-
> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
> Sent: Monday, December 08, 2014 2:53 PM
> To: af@afmug.com
> Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> Further investigation.  To repeat it.
>
> First reset factory defaults to a 3.6 sm running 13.2 then reboot.
> Enable SNMP read/write in GUI.
>
> Then:
>
> #set IPv4 filter all
> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
>
> #set IPv6 filter all
> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1
>
> The moment you set IPv6 filter it disables the IPv4 filter.  After you do 
> this once you cannot reproduce it without resetting defaults and rebooting 
> again.  Seeing other SNMP issues.  Still testing.
>
>
>
>
>
> On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af  
> wrote:
>> Matt,
>>
>> We are not able to reproduce your issue.
>>
>> We have some questions for you.
>> Q1) Is your radio's SNMP setting set to R/W?
>> Q2) Is the radios' SNMP Community string set to "Canopy"?
>> Q3) Is the SNMP filter enabled?
>> Q4) Are you rebooting the SM after sending the SNMP OID?
>> Q5) Are you trying this to the SM over the SNMP proxy?
>> Q6) What is the error that snmpset provides after issuing the command?
>>
>> Best,
>>
>> Cambium Jonathan
>>
>> -Original Message-
>> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
>> Sent: Monday, December 08, 2014 12:01 PM
>> To: af@afmug.com
>> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
>>
>> allIpv4Filter
>> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
>>
>> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i
>> 1
>>
>> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
>> 13.2 and it does not seem to work.  Anyone else see an issue with it?
>> Setting the allipv6filter does seem to work.  This a bug?

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-08 Thread Jonathan Mandziara via Af 
Matt,

Thanks!

With those steps that you provided, I can see the issue that you are having.  

I will open an issue for this.   

The obvious workaround (until fixed) would be to set the IPv4 Filter after 
setting the IPv6 filter in your script.

Best,

Jonathan

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Monday, December 08, 2014 2:53 PM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy v13.2 and SNMP Bug?

Further investigation.  To repeat it.

First reset factory defaults to a 3.6 sm running 13.2 then reboot.
Enable SNMP read/write in GUI.

Then:

#set IPv4 filter all
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1

#set IPv6 filter all
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1

The moment you set IPv6 filter it disables the IPv4 filter.  After you do this 
once you cannot reproduce it without resetting defaults and rebooting again.  
Seeing other SNMP issues.  Still testing.





On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af  wrote:
> Matt,
>
> We are not able to reproduce your issue.
>
> We have some questions for you.
> Q1) Is your radio's SNMP setting set to R/W?
> Q2) Is the radios' SNMP Community string set to "Canopy"?
> Q3) Is the SNMP filter enabled?
> Q4) Are you rebooting the SM after sending the SNMP OID?
> Q5) Are you trying this to the SM over the SNMP proxy?
> Q6) What is the error that snmpset provides after issuing the command?
>
> Best,
>
> Cambium Jonathan
>
> -Original Message-
> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
> Sent: Monday, December 08, 2014 12:01 PM
> To: af@afmug.com
> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> allIpv4Filter
> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
>
> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 
> 1
>
> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
> 13.2 and it does not seem to work.  Anyone else see an issue with it?
> Setting the allipv6filter does seem to work.  This a bug?

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-08 Thread Matt via Af 
Further investigation.  To repeat it.

First reset factory defaults to a 3.6 sm running 13.2 then reboot.
Enable SNMP read/write in GUI.

Then:

#set IPv4 filter all
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1

#set IPv6 filter all
snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.160.0 i 1

The moment you set IPv6 filter it disables the IPv4 filter.  After you
do this once you cannot reproduce it without resetting defaults and
rebooting again.  Seeing other SNMP issues.  Still testing.





On Mon, Dec 8, 2014 at 1:51 PM, Jonathan Mandziara via Af  wrote:
> Matt,
>
> We are not able to reproduce your issue.
>
> We have some questions for you.
> Q1) Is your radio's SNMP setting set to R/W?
> Q2) Is the radios' SNMP Community string set to "Canopy"?
> Q3) Is the SNMP filter enabled?
> Q4) Are you rebooting the SM after sending the SNMP OID?
> Q5) Are you trying this to the SM over the SNMP proxy?
> Q6) What is the error that snmpset provides after issuing the command?
>
> Best,
>
> Cambium Jonathan
>
> -Original Message-
> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
> Sent: Monday, December 08, 2014 12:01 PM
> To: af@afmug.com
> Subject: [AFMUG] Canopy v13.2 and SNMP Bug?
>
> allIpv4Filter
> Object ID: 1.3.6.1.4.1.161.19.3.3.2.132
>
> snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1
>
> Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
> 13.2 and it does not seem to work.  Anyone else see an issue with it?
> Setting the allipv6filter does seem to work.  This a bug?

Re: [AFMUG] Canopy v13.2 and SNMP Bug?

2014-12-08 Thread Jonathan Mandziara via Af 
Matt,

We are not able to reproduce your issue.

We have some questions for you.
Q1) Is your radio's SNMP setting set to R/W?
Q2) Is the radios' SNMP Community string set to "Canopy"?
Q3) Is the SNMP filter enabled?
Q4) Are you rebooting the SM after sending the SNMP OID?
Q5) Are you trying this to the SM over the SNMP proxy?
Q6) What is the error that snmpset provides after issuing the command?

Best,

Cambium Jonathan

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Matt via Af
Sent: Monday, December 08, 2014 12:01 PM
To: af@afmug.com
Subject: [AFMUG] Canopy v13.2 and SNMP Bug?

allIpv4Filter
Object ID: 1.3.6.1.4.1.161.19.3.3.2.132

snmpset -v 2c -c Canopy 169.254.1.1 .1.3.6.1.4.1.161.19.3.3.2.132.0 i 1

Keep trying to set the allip4filter with SNMP on a 3.6 450 SM running
13.2 and it does not seem to work.  Anyone else see an issue with it?
Setting the allipv6filter does seem to work.  This a bug?