[amsat-bb] satpc32

[ANTHONY JAPHA]

Where should I go to buy the cable (CT-62) for the FT-817 that connects the CAT 
jack to the computer (RS-232 probably) for rig control?  Anyone know of a cable 
that has a built-in serial to USB converter?  That would make portable use 
easier.

Tnx and 73,
Tony, N2UN
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32

[Allen Vinegar]

I was in the middle of a contact on FO29 when I got repetitive message boxes 
stating the following:

Zugriffsverletzung bei Adresse 00405DFC in Modul 'SatPC32.exe'. Lesen von 
Adresse 00C0C0C0

The program froze while this was going on.

Any ideas?

Al W8KHP
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 ?

[WCP]

Using SatPC32 I have trouble tracking ISS. I have SatPC32 running on two
different WIN98se machines and I get two different tracks. I have the
location and time set the same on both machines. Also using the same Keps.
One reads 338 -61 with AOS 4:51 LOS 5:00
  The other  313 -27  with AOS 4:34 LOS 4:41


___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Art McBride]

Hi All,

 I am trying to get my ICom 820H working under CAT. 

I have an OPC-478UC It is USB to single line CI-V required by the ICom 820H.
I have shifted it's output to the tip from the sleeve on the 1/8" phone
plug. Under System / Device hardware the OPC 478 shows up as com 3.  The
radio does not control.  I have set the address to 60h from 42h in the radio
and the baud rate to 9600 on both radio and program. I get the E/A Fehler-32
warning when I try to store the com port values. The OPC 478UC does work my
ICom D800 and when connected to the 820H will return a Com 3 when com port
is selected. If I unplug the cord to the 820H it tells me no radio is
connected.   

 

Any help on this one would be appreciated. 

 

Art, 

KC6UQH 

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPc32

[WCP]

Thanks for help with SatPc32.Must be a better tracking program!
Any suggestions?

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Peter]

Hello,

If anyone can assist Bruce with his problem, it would be appreciated.

73,
Pete, WB2OQQ


This message originated from the AMSAT website

Sender: Bruce Mertz  Email: bmer...@cox.nethost:
Subject: Technical Question

Message:
Having a problem with SatPC32 Version 12.8

Problem: Satellites are tracking fine on the screen but in the window at the
bottom the data is not correct Azimuth and elevation are around 100 degree
or so off. Also what is Standard direction in the Rotor menu?

Not using Radio settings at this time.

Running it on a Dell 2.53GHZ CPU using Vista
LVB Tracker with a Yaesu G-5400 rotor (Note appears to be working fine)

Rotor Setup are Yaesu GS232, LPT=2 Delay= 70, turning S, Elev.= 3, H and V
corrections =0
My Grid is FM17ub
I have checked and rechecked my settings please help


Thanks

Bruce
Bruce WA8KLH Amat # 35366



Phone Number: 757 850-0885 Best Time to Call: 4 pm Eastern


___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Nigel Gunn G8IFF/W8IFF]

It amazes me, the number of people who, every time a new 
satellite/radio/rotor/interface etc appears, have to ask how to 
configure SatPC32 to work with the new equipment.
I've never seen this with other software, other than the HRD suite.

I've not used SatPC preferring Orbitron or InstantTrack.
Does SatPC not have a manual or instructions?
Are we breeding operators who cannot read or understand the language?

What's going on?
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 ?

[Jack Barbera]

I have been running SATPC32 12.8 for years and love it.This is after trying 3 
other program.Its a steal for what it costs.
 Jack WA1ZDV 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32

[Nick Pugh K5QXJ]

Has anybody connected the Felex 5000 to satpc32?

 

 

 

 

Thanks

 

nick

Office   337 593 8700

Cell  337 258 2527

 

Helping UL become a world Class Engineering  and Educational School

 

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Bato, Andras]

Hi Eric ON4HF,

I wonder which version of SatPC32 are you using?

I have put your lines into DOPPLER.SQF file but it does not do any change!

Isn't there any mistake in those lines?

Otherwise nasa.all file does not contain RADIOSCAF-B data!

It can be found in amateur.txt list only!

gl de ha6nn
Andras

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Keith Le Boutillier]

Hi Guys

 

Many thanks for all the help the Doppler function is now working
correctly.

My issue was that because all my computers are on a domain the my
documents folder is on the server and not the local PC when SATPC32
installed it puts all the .SQF files on the server.

Once I realised what was happening I found the file and added the
satellites and all worked ok.

 

Thanks again for your help

 

 

73 Keith GU6EFB  

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[w4upd]

Having a few issues using SatPC32 and especially Yaesu gear, 
specifically FT-817 and FT-857. The copy I aa using is not a registered 
version yet nor have I modified any of the SQF files.

When using on the FT-817, I cannot get any response to the radio. It 
doesn't appear to follow the doppler corrections being issued by the 
program. When using the FT-857, the unit appears to semi-work, but it 
seems to switch between 2 vfos. When using my Icom IC-910, it works fine 
if I let it go into satellite mode.

If this is just a file editing problem let me know. In general, I'll be 
using the IC-910 most often but have considered using the 817/857 for 
portable operation if I can get it to work correctly. I also noticed 
that the FT-857 has issues with HRD as well, but that's a subject for 
another time.

Any guesses as to why FT-817 not working or does there need to be some 
initial file modifications?

Regards,

Reid, W4UPD

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Roger Swickis]

Dear Folks,

I am attempting to get myself back on the satellites and am having some 
problems with SatPC32.

Although WinAOS gives me accurate satellite position data, SatPC32 does not.   
Furthermore satellite AOS/LOS data is different between the two programs, 
sometimes by a half an hour.

I have checked all the settings and have tried updating the Keps but can't seem 
to get the program to display accurate data.

Has anyone had this problem or does anyone know if there way around this other 
than re-installing SatPC32?  (I'd rather not have to input all the settings 
again if I don't have to.)

Thanks

Roger VA7MG



___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32

[Roger Swickis]

Thanks Mark,

Well, I had the same position data in both AOS and SATPC32.

I don't know what was happening, but it seems to have magically resolved 
itself.  Both programs now read the same.

Strange.  But I think we can attribute it to RF getting into the computer.  At 
any rate I'm glad I didn't go ahead and reinstall everything.

Oh well - you don't have to be good of you're lucky!

Roger VA7MG



___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32

[Steve Bluemel]

Hello All,

Recently my Satpc32 software has been predicting the birds about 20 minutes
ahead of their actual AOS. I am using the latest version. System clock is
accurate and reads the same as the software. Kep data is fresh. My location
is loaded accurately.

Has anyone experienced this before or have any ideas what may be wrong?

Thank you,

Steve, KI6OQU
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32

[Ken]

Having just recieved satpc32  version12.8a via CD, thought it would be nice to 
print ? manual.
 I can print the readme file but not thr manual? I am using Vista. I have used 
IT tracking program
for 20+ years and decidded to upgrade. Any thoughts will be appreciated. W7KBM 
Ken
ps hope my age is not showing 82
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32

[Ken]

I am having trouble getting the time right
on my sat32pc program. Help.  Ken
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[Maurice Doyle]

SatPC32 not tracking properly.

It was working fine and something happened, now the Satellites rise near India 
and the LVB Tracker starts tracking the bird on that side of the globe.
The observer set windows has my longitude and latitude. Any idea what I need to 
do to fix this problem? My email address is maurice...@comcast.net.

Thanks! 

W3FGP
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32

[John Becker]

Old dell computer had a complete melt down everything lost.
I now can not find the SATPC 32 CD.

How hard is it to get a replacement?

John, W0JAB

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32

[wb4...@wb4gcs.org]

All:
Trying to make this work on a new install of Windows7, 64 bit.  According to the
help file, this should work, but every time I start SATPC32, it wants IOPORT.SYS
in WINNT/SYSTEM32/DRIVERS.  Which I created, but still doesn't start without
complaining.

Any suggestions?
Thanks & 73,
Jim
wb4...@amsat.org
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32 ooops

[w7lrd]

Hello 

While using satpc32 with the lvbtracker I get a Ungulltige Gleitkammaoperation 
error message along with that bad "thunk" sound.  What's going on?? 

73 Bob W7LRD 


___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 question

[ANTHONY JAPHA]

Hi everyone,
There must be an easy way to load Keps from a file on a 3 1/2" floppy, but what 
is it? (No internet on this laptop, but a floppy drive.)

  I have 1 USB port that I hope to use for rig control,  Where can I find a 
proper driver for a USB flash drive that the laptop won't recognize?  I think 
this laptop (Dell Inspiron 3800) was made before these flash drives became 
fashionable.

Many tnx and 73,
Tony, N2UN
LM 183 
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 qrn

[Bob- W7LRD]

Hello-When I start up satpc32 on my Dell computer I get this annoying qrn hiss 
on 2M.  Any simple fixes short of moving the computer further away?  It is from 
the computer not the monitor. 

73 Bob W7LRD 

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 upgrade

[Erich Eichmann]

Hello,
I have uploaded an upgrade of SatPC32 (V. 12.8a) on my website
www.dk1tb.de

The changes can be seen here:
www.dk1tb.de/Changes128a.txt

(if these links fail to work from this email enter them into the address line 
of your browser). 

I hope it works.

73s, Erich, DK1TB
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 upgrade

[Erich Eichmann]

Hello,
I have uploaded an upgrade of SatPC32 (V. 12.8a) on my website 
http://www.dk1tb.de

The changes can be seen here:

http://www.dk1tb.de/Changes128a.txt

I hope it works.

73s, Erich, DK1TB
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 question

[ANTHONY JAPHA]

Hi,
Anyone using a netbook running Windows 7 Starter with SatPC32?  
Have you used the Radio Shack USB/Serial adaptors with it?  I use 2 of them on 
my desktop without trouble, but will they work with the netbook?
What model netbook would you suggest?  Any other suggestions?  Tricks?  Hints 
and Kinks?
Thanks and 73,
Tony, N2UN
LM 183
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 Error

[Michael]

I was wondering if someone could tell me what this error is and the fix for
it on satpc32? The error is ole-fehler 80120088


Thanks in advance !

 

   Mike   N8GBU

 

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32 error

[Michael]

I have an error on satpc32 and was wondering could help me with it. The
error is OLE FEHLER 80120088. Any help would be appreciated! 

Thank you in advance

 

   Mike   N8GBU

 

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 ==> iPoint

[Thomas Doyle]

Hi,

I recently completed a project that someone on the board might find
interesting. One goal was to make it compact so it could be taken and used
outside the shack. It weighs 4 lb 5 oz and connects to your computer through
a USB or serial port. Another goal was no knobs, switches or any other
controls - there is only a reset button on the circuit board that I have
never used. It would be a great thing to take along when making
presentations on ham satellites. It would also be fun on field day since it
runs off 12V and is portable.  It works with SatPC32 by emulating the Yaesu
GS-232 controller. It should work with other tracking programs but I have
not tried them (SatPC32 works great for me and AMSAT needs the money).

You might want to check out the youtube video that gives a little demo. It
is full HD and looks very cool in full screen HD. I guarantee there is
absolutely no footage of me waving my Arrow II antenna around.

FAQ
--
Q: Why no surface mount parts.
A: I am too old and clumsy

Please read the Entire Description on the youtube page before watching the
show.
Remember to click on the "show more" button under the first line of the
description.

http://www.youtube.com/watch?v=gnc4-XcEXEQ

73 W9KE
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 simplified

[Thomas Doyle]

Thanks for all the feedback on the tracker. A few people commented that it
was a bit complex mechanically. This got me thinking about a minimal version
where the mechanical section  could be built in less than an hour by almost
anyone.

Several people asked about moving antennas. The motor in the iPoint has
torque of only 35 oz-in. This is at least an order of magnitude less than
enough to move an even a small antenna. The main project I am working on is
an az-el rotor for small antennas. The azimuth rotor is working and I am
working on the mount for the mast. I want to make sure the azimuth rotor is
rock solid before working on the elevation rotor. The reason the motor
driver in the iPoint is so over designed is that it was designed for the
actual rotor not the iPoint. The iPoint actually started out as just a test
bed for software development.

A few people have asked about astronomical applications. I have thought
about that myself and have been looking for a simple usb telescope to mount
on iPoint. It would be interesting to set up SatPC32 to track the moon and
let iPoint run all night and capture shots of the moon from the usb tele.
The tele would have to be very small and light weight. Does anyone have
Kardashian data for heavenly bodies ? Wonder if anyone caught that. I
actually would like to know if it is possible to track the moon with SatPc32
and if so where to get the elements.

Here is a short HD video of the minimalist iPoint. While it may be a piece
of junk it does work and might give someone some ideas on building something
simple but much better than what I did. It did require only a hand drill and
a hacksaw and took only about an hour to build. After seeing it you may
wonder while it took an entire hour. There is a quarter just to the right of
the beast for size reference.

There was quite a bit of discussion on auto license plates a while back. I
did not want to contribute to the QRM then but I do have something on that
topic at the end of the video. It is actually my photo qsl without the
address information - you will understand when you see it. Since I do not
operate very often and qsl only when I get one this is probably your only
chance to see this rare card. If you look carefully at the back left of the
video you can see the azimuth rotor partially disassembled. I keep it there
to make me feel guilty when I work on something else.

here is the simplified tracker - I know it is junky so no need to tell me
http://www.youtube.com/watch?v=nGwyUdb_vHs

Here is the good tracker in case you missed it
http://www.youtube.com/watch?v=gnc4-XcEXEQ

73 tom ...
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 (Question?

[Stuart Balanger]

*Question?
I have "Setup" the Kenwood TS-2000X & completed that 1st. step,
& the "readme.txt says "Choose the COM Port  # for CAT control"
& can't find the box where the words "COM port" is?
Can someone help me?73,.Stu (WA2BSS)
Ps It is definetly a "3H" day (Near 100 degrees in Poughkeepsie,NY!!)
*
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 setup

[Dave Webb KB1PVH]

  I just added a new computer to the shack and have SatPC32 all set and
running fine. My problem is that during setup, I chose 360 degrees for
azimuth instead of 450 and can't change it now. When I go into the rotor
setup menu, I can change everything else except for the max azimuth. I had
this problem before and can't remember how I fixed it.

Thanks,

Dave - KB1PVH

Sent from my Verizon Wireless DROID X
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32/moon

[Bob- W7LRD]

Can we get satpc32 to track the moon? 

73 Bob W7LRD 
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATpc32 problem

[SteveBluemel]

Hey all,

Problem solved. It turns out that the AMSAT kep data was bad. I downloaded  
the Celestrak keps and all works great. Now, i need to figure out how keep  
my kep data file accurate.

Thank you all for your suggestions, and Erich for the customer service.

Steve

KI6OQU
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 & Subtones

[Matt Severin]

Good morning,

I am hoping someone can help answer a question.  I am running SatPC32 12.8a
and controlling my Yaesu FT 897 as my uplink radio.  Everything works fine
except that I cannot get the subtones to update.

I am using the following data in my SubTones.SQF file (as recommended in the
help files)

AO-51,67.0,$3F,1
SO-50,67.0,$3F,1
SO-50,74.4,$3E,3
SO-67,233.6,$01,36
HO-68,67.0,$3F,1

I'm running Windows XP and my baud rate is 9600, although I have varied it
to see if that would resolve my issue.

Everything thing updates on the radio as it should (including the radio
turning the tones 'on' and going into split mode); the only issue is that
the tone is not updated, it will stay on the last tone used.  For example if
I use our local repeater, the radio will still use that tone.

Thanks in advance for any help or ideas.

73

Matt Severin, N8MS
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32 messages

[mlolmsted]

I use Sat Pc as my main sat.  program and think it is does a great job.   
However, not speaking or reading German, I have a hard time understanding the 
error messages.  Has anyone written an updated  or translated version with the 
messages written in English?

Merle, AA4QE
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 error

[lloyd vandervort]

Hi, i suddenly have a problem with my satpc 32.
It suddenly has this error.

zugriffsverletzung bei adresse 01898848 in module" ihcom02d.dll" 
.schreiben von adresse 018a 33a8
translated to this

Access violation at address 01898848 in module "ihcom02d.dll. write 
address 018a 33a8
anyone had this error ?
Lloyd  N9RPU



___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 problem

[Bob- W7LRD]

Hello 

I am getting a box that says E/A Fhler 105. marching across the screen and I 
must restart the computer to stop it.  I think I had this before, of course 
having senior moments I can recall how to fix it. 

73 Bob W7LRD 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 problems

[Bob- W7LRD]

I had to reinstall satpc32.  first  problem 

..could not open com port 3 

   then no source file found for group standard 

    still getting the error 105 marching across the screen 

thanks from the digitally challanged 

73 Bob W7LRD 


___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 help

[Nick Pugh]

I updated the keps and now when I open satpc32 I get a error message that
keep repeating and the only way to abort the error message is to reboot.
Removing the keep file does not fix the problem.  Help??

 

Thank

 

nick 

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 "issue"

[Dave Webb KB1PVH]

I was trying to do another configuration on SatPC32, when I clicked on
Configuration 2 I get a pop up that says E/H Fehler 105 and I can't get out
of the loop. Any suggestions?

Dave - KB1PVH

Sent from my Verizon Wireless DROID X
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32 question

[ANTHONY JAPHA]

After a few months of inactivity, SATpc32 is showing a funny but unfortunate 
feature:  out of the 6 sats I have active (no change from previous use), only 
the linear birds show up on the screen.  They are shown in the normal way, with 
the outline of their footprint always visible.  The FM birds don't show up at 
all until they are clicked on in the A, B, C, etc. list at the bottom of the 
screen.  When they are clicked, the inside of the footprint is shown and 
illuminated, but without the outline around the footprint.  And only 1 of those 
birds can be shown at any time.  The linear birds continue to be shown properly.

Any ideas would be appreciated.

Tnx and 73,
Tony, N2UN
LM 183
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Question

[Kelley]

Satellite newby here, trying to setup a station...

For all you SatPC32 users, a question. I'm using the software with 2 
radios. One is an Icom IC-706MKIIG, the other is a Icom IC-746. While 
the 706 covers vhf and uhf, the 746 only covers vhf.


The way my version of SatPC32 is set, it tries (depending on the 
satellite) to set the 746 to uhf. I suspect there is a way to tell the 
software that a radio can only do vhf, but can't seem to find where to 
do that. Anyone know?


Thanks,

--
Kelley - WØRK


___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 winaos

[Bob- W7LRD]

the aos in winaos program is about 12 min. before the actual aos. Being 
slightly digitally challenged I am having a problem figuring it out. 
working them till they drop 
73 Bob W7LRD 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 & Flex5000A

[Richard Lawn]

Ive started experimenting with converters and/or transverters on my
Flex5KA, using it as my receiver and an FT-847 as the uplink. I use SatPC32
to control both radios. I've got the Flex setup as rdaio 1 using the
Kenwood TS-2000 configuration and radio 2 is set to the FT-847. It seemed
to work for a short time.  but I made some changes to the CAT Delay and the
status of the RTS +12 check box and now things are getting strange. When I
start SatPC32 the Flex is suddenly set to 65 mhz. Anyone have any
suggestions particularly about the CAT Delay setting and RTS +12 status?

TNX
73 de W2JAZ
Rick
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 etc

[Bob- W7LRD]

Thanks to many and Dave KB1PVH I can now input keps in my computer all by 
myself. I read this in the weekly AMSAT bulletins 

The Castor 30 second stage motor, built by ATK, ignited for a burn lasting 
two-and-a-half minutes, accelerating the rocket to more than 17,000 mph. 
Engineers declared the rocket reached orbit, and the upper stage deployed a 
8,377-pound block of aluminum designed to mimic the mass characteristics of the 
Cygnus spacecraft, which will take the dummy 
payload's place on the next Antares 
launch. 

Why does this want me to pull out what little hair I have left?? 8,377Lbs! I'm 
sure I am missing something, what did AO-40 weigh? 
73 Bob W7LRD 

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 doppler ??

[Bob- W7LRD]

While using Satpc32 for doppler correction (IC-910H) often I have to "tweek" 
the calibration using the CAT function. The amount of "tweeking" can vary 
between satellites and orbits. At times I will simply turn off the auto 
function and just go manual. Is there a method I can depend more on the 
computer or am I just getting lazy? 
73 Bob W7LRD 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Registration

[carl creamer]

I need some advice on how to solve this.
I downloaded  and installed SatPC32 V.12.8b a few weeks ago and got it up and 
working as it should.It is a cool program.
I also  ordered the Registration on paypal last week , but have yet to receive 
the registration information email.
I sent an email and called the 1-888 number and so far no response.
Any suggestion on how to resolve this would be greatly appreciated.
Thanks
Carl
WQ6C
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 error

[Bob- W7LRD]

putting satpc 32 v12.8c on another computer - get a old-fehler 8005403a error- 
suggestions?? 
73 Bob W7LRD 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 question

[Anthony Japha]

Birders,
I’m confused about the required entries into DOPPLER.SQF, and would appreciate 
your help.
In entering the line required for AO-73, is the order LSB,USB or the reverse, 
USB, LSB?  The source of my confusion is that the instructions in the software 
indicate “Up- and Downlink modes” while the actual entries for the linear birds 
appear, except for AO-7, in the opposite order.

Thanks much.
73,
Tony, N2UN
LM183

---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 question

[Anthony Japha]

Thanks Eric and Dave,
The file is done.  CU on the birds.
73,
Tony, N2UN

---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] SatPC32

[E.Mike McCardel]

John,

You should be able to simply download the program file from
http://www.dk1tb.de/downloadeng.htm

Choose the appropriate version for your locale. The manual can also be
downloaded here.

Whereas, this is comes as the demo version, if you simply enter your
registration information it will activate the full program.

I believe Martha, in the AMSAT office, may have an accounting of
registration information  for past purchases.

EMike

E. Michael McCardel, KC8YLD
V.P. for Educational Relations, AMSAT-NA


On Thu, May 29, 2014 at 12:33 PM, John Becker  wrote:

> Old dell computer had a complete melt down everything lost.
> I now can not find the SATPC 32 CD.
>
> How hard is it to get a replacement?
>
> John, W0JAB
>
> ___
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 %$#$ again

[Bob- W7LRD]

This is on different computer- I get Ungultige gleitkommaoperation marching 
across the screen.  I must shut the computer down to stop it.  I had just 
downloaded new keps.  The last time (other computer) I had to delete the entire 
program and start from scratch with everything.  Is there something I am 
doing/not doing??  Becoming a PITA to keep everything running. 
from the digitally challenged 
73 Bob W7LRD 
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 problems

[Bob- W7LRD]

Still attempting to make satpc32 work.  Removed it from hard drive, downloaded 
from Erics site, now get error 1925 not sufficient privileges etc etc.  The 
next sound you hear will be the computer flying out the window.  Assistance 
please. 
from the digitally challanged 
73 Bob W7LRD    
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Question

[n0jy]

Hi All,

I just installed (upgraded) to SatPC32 v. 12.8c.

Now, I have two installations here.  One on my new laptop, and one on my 
desktop PC.  Laptop is for portable work, of course.
I noticed that on my laptop installation, on the SETUP menu OPTIONS 
dialog, there is a checkbox for GROUND TRACK.
This option does not exist on my desktop installation.  Same program, 
same settings otherwise...


I see these parameters are held in SATSTART.SQF.  I see + as the last 
entry (and it is one more entry than my desktop file has) which 
corresponds with the GROUND TRACK checkbox.
If I edit SATSTART.SQF on my desktop PC and add that +, when it starts 
it does not have GROUND TRACK turned on.  So I can't fool it.


Any thoughts, suggestions, help?

Thanks!
Jerry
NØJY
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] SATPC32

[Erich Eichmann]

Jim,
IOPort.SYS is a 32-bit kernel driver which doesn't work on 64-bit 
Windows. On 64-bit Windows the SatPC32 setup program installs it to 
C:\Windows\SydWOW64\drivers. It is used (on 32-bit systems only) with 
some rotor interfacce (IF-100, FODTrack etc.). These interfaces 
therefore can't be used on 64-bit Windows.

Older SatPC32 versions used the IF-100 by default.

What version of SatPC32  do you use? Did you make settings regarding 
rotor control?


73s, Erich, DK1TB

Am 28.06.2014 20:15, schrieb wb4...@wb4gcs.org:

All:
Trying to make this work on a new install of Windows7, 64 bit.  According to the
help file, this should work, but every time I start SATPC32, it wants IOPORT.SYS
in WINNT/SYSTEM32/DRIVERS.  Which I created, but still doesn't start without
complaining.

Any suggestions?
Thanks & 73,
Jim
wb4...@amsat.org
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATpc32 doppler.sqf file

[Marc Tessier - VE3TES]

Does anyone have a current up to date doppler file for SATpc32 I could get, 
mine is so messed up from attempts to add a few of the newer birds. I would be 
grateful if yours already has the newer birds added...

73 and CUL de VE3TES
Marc Tessier
ve3...@hotmail.com
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 doppler file

[Jean-François Ménard]

Hi,

Could somebody send me his doppler file for SatPC32 ??

I'm a newbie, and I would like to figure it out how FO-29 and VO-52
are configured in this file. I actually trying to "calibrate" my setup
to use those birds. I'm using 2 FT-817ND with SatPC32. Works great !!

73

-- 
Jean-François Ménard
VA2SS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
AMSAT www.amsat.org / Member #37102
ARRL  www.arrl.org
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Not Tuning

[Joel Black]

I am trying to get SatPC32 v12.8 to automatically tune my FT847.  When 
the program first comes up, the radio is initialized as indicated by the 
"CAT" display and when I click on a satellite, the radio tunes to the 
correct satellite.  That's where it stops; it no longer changes the 
frequency of the radio.  If I turn off and turn back on CAT control, it 
will update once and will then quit again.  I have the same problem with 
my FT-857.


I have read the help and .SQF files, but I cannot seem to find the right 
combination.  I have changed the baud rate of the radio and the program 
to 4800, 9600, and 57.6k and made the corresponding changes with the CAT 
delay value as recommended by the manual.  I have not yet tried 
uninstalling and re-installing the app.


I am running Vista 32bit and using a USB-to-serial converter which works 
with everything else.  The same converter works with the HRD 5.0 
Satellite Tracker.  Problem is, I cannot get HRD to accept sub-audible 
tones so I can work AO-51.  I don't know if it's a limitation of the 
program or cockpit error.


Any suggestions, known issues, or anyone else having the same problem(s)?

Thanks,
Joel, W4JBB
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.420 / Virus Database: 270.14.4/2416 - Release Date: 10/05/09 
18:23:00
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Not Tuning

[Tim Goodrich]

You might also try playing with one of the other settings. It's been a while
since I've used SatPC32, so don't quote me on the name of the setting, but
it may be the CAT delay. On my 817 I had to change the setting from the
default of 120ms to 250ms.

Tim
KI6VBY

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 doppler.sqf file

[Bato, Andras]

Gentlemen,

It seems the doppler.sqf file is missing grom the SatPC32 software which is the 
best stand alone satellite tracking software I've ever seen.

Would someone send me -or to the list- a sample file to be able to track 
satellites using Doppler tuning?

Otherwise CAT works fine with my FT-847.

May you have success with SatPC32 and in satellite tracking.

gl de ha6nn
Andras
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 config files

[Tim Goodrich]

I hadn't used SATPC32 in a while, opting for HRD instead, but HRD is awfully
flakey at connecting to my 817 sometimes and also inexplicably reverses the
downlink and uplink frequencies for no reason sometimes. So, I decided to
give SATPC32 a try again, but I found that when I load it, it essentially
hangs my computer by taking up 99% of the resources. 

 

I want to reinstall it, but don't want to lose the settings that I manually
configured. Can anyone tell me which files I should save before deleting the
old directory and then put into the new installation?

 

Thanks,

Tim KI6VBY

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Auto Doppler

[Howard Kowall]

Hello to everyone
Is it possible to use SatPC32 12.8a without auto Doppler correction?
I use 2 separate transceiver one for uplink the other for downlink,all I want 
to do is be able to change the downlink freq. and let the uplink follow 
according to the Doppler sqf file.I want no automatic Doppler correction just 
transparent tuning.
Thanks to all who read this
Howard
VE4ISP

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 - FT-817

[Clint Bradford]

James Brown (no, not THAT "James Brown") needs assistance with SatPC32 - Would 
a SatPC32 guru please answer him directly at ...

jimki...@sbcglobal.net

JAMES:  Wondering if you have instructions to make ft817 and ft857 connect to 
sat32pc and how that works. I have the 857 working as primary. Thanks, Jim KI6WJ

Many thanks - I just am not that familiar with SatPC32 ...

Clint K6LCS
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 - Quick Review

[Clint Bradford]

I am working on a deadline today - I just need a couple of you to reply ...

Regarding SatPC32 ...

Would you recommend SatPC32 for a "newbie" to the FM satellites for tracking? 

Easy to update AMSAT keps? 

Easy to set up home coordinates? (Still need to register to have that 
preference stick, I believe.)

THANK YOU!

Clint, K6LCS
909-241-7666
Skypename - clintbradford



___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 and FT847

[Tom Schuessler]

Hi all,

In an attempt to dabble my toes in the linear transponder pool, I asked a
FT847 owner friend to bring his rig over to try and understand the mechanics
of making it all work with the computer interfaced.  Got SatPC32 to
communicate at 9600, 8, none, 1, none, with the radio and the radio
responded to changes I made on the program like using keystrokes to modify
the frequency of uplink or downlink.  Problem is that although the program
was tracking Doppler correctly, the radio was not tracking at all.  With the
multiple lines of possibilities on the Doppler.sqf file as is the case for
AO-51, I can go to the CAT dialog and change the mode frequencies just fine,
the radio goes to the new frequencies and even reflects the current state of
the Doppler shifted frequencies but from there, no Doppler corrections
occur.

Now I remember reading the "Manual" that "CAT Delay" for the FT897 needed to
be set to 20.   Cat Delay is in the "Radio Setup" dialog is defaulted to 70.
I realize this now after the fact with radio not in my presence.  Is this
the reason that the above mentioned problem could be occurring?

I hope to make another go at this in a few weekends in the hope of getting
ready for Field Day.  Thanks for the help of the list. 

Tom Schuessler
2713 Lake Gardens Drive
Irving, Texas  75060
972-986-7456
214-403-1464 (Cell)
n5...@arrl.net




___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Band Change?

[Paul Delaney - K6HR]

Hello Erik et al,

I'm using SatPC32 with an ICOM 821H. Is it possible to have SatPC32 change the 
up/down band for each satellite? The way I have it working now, I have to 
manually swap bands.

Paul Delaney
paul.hamra...@verizon.net
http://k6hr.dyndns.org:8080
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 - Keps Path

[Carl Rimmer W8KRF]

Is there a way I can change the default PATH for my Keps files in 
SatPC?  I like to keep one Kep file on one computer and load them over 
my LAN to the other computers/programs.


I want to start using SatPC again after not being very successful using 
HRD Sat Tracker on ARISSat-1.  It seems that the program of choice here 
on this bulletin board is SatPC.  It has been ages since I have used it 
so I am trying to get it up-to-date and configured for ARISSat-1.  I 
have spent hours searching the archives and I think I have all the SQF 
files setup.  It is controlling the radio (TS-2000) and rotor.


Thanks,

--
*Carl W8KRF *
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Doppler.SQF file

[Keith Le Boutillier]

Hi Group

 

Have just downloaded the trial version of SATPC32 and have most things
working ok.

 

The only thing I cant get to work is the Doppler tracking SatPC2
controls the rig an Icom 910 fine with the default satellites well.

It give examples of what to added in the Doppler.SQF file so here are my
questions.

 

Should the Doppler.SQF file have been created during installation  I had
to create my manually?

I have put an entry in for ARiSSAT1 but SATPC32 is not picking this
information up from the file.

I know that this is a newbie error but could somebody point me in the
right direction 

 

73 and Thanks

 

Keith GU6EFB 

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPc32 kepler Data

[Howard Kowall]

Hello all
I have an older laptop that has no internet connection,I run Satpc32 on my main 
computer that has internet connection and I am able to update the kepler data.I 
want to use the  kepler data from my main computer,and copy it to my laptop via 
USB  flash drive.I cant seem to find the kepler folder in the SatPc32 
folder.Has anyone one shared the kepler data.
Thanks to all who read and reply in advance
Howard
VE4ISP
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32, Gpredict etc.

[Thomas Doyle]

There are a huge number of tracking/station control programs out there. We
eventually pick one that meets our needs and learn how to use it. My main
interest is in the user interface and ease of use. When we use any program
for a long time it starts to seem to seem to be intuitively obvious how to
use it in much the same way a carpenter finds it intuitively obvious that
the next mark on the ruler past 19/32 is 5/8. Here is a short video showing
parts of my feeble attempt. There might be an idea or two in there that you
can use or a nit or two that you can pick.

It will look a bit better if you select 480P and use full screen.

http://www.youtube.com/watch?v=Et65kkqPvZY

-- 

Sent from my computer.

73 W9KE tom ...
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Releasing Ports

[Joel Black]

I have an issue that appears to be with SatPC32 although I could be wrong.

When I use SatPC32, all works fine with my USB-to-serial adapter 
controlling the radio.  If I shut down SatPC32 and start HamRadioDeluxe, 
generally speaking, I cannot control HRD.  It's as if the USB-to-serial 
adapter is still wanting to talk to SatPC32.  Starting up SatPC32 in the 
same session works fine.  I have found that a restart of the PC is not 
usually enough to release the USB adapter - a full shutdown is 
required.  Occasionally, unplugging and replugging the USB adapter will 
work, but not often.

USB adapter:  U232-P9
PC:  Dell E520
OS:  Vista 32-bit
RAM:  3GB
SatPC32:  v12.8a
HRD:  v5.0 build 2434 Beta

When I was getting the version numbers, I started SatPC first and then 
HRD.  Right now, it's working as it should.  Even changing satellites, 
thus making the radio switch modes, doesn't cause HRD to fail on 
start-up.  So, I cannot make it *not* work right now.

Thanks,
Joel, W4JBB
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Error Messages

[Elan Portnoy]

On startup, I get OLE-fehler 80045030 in a popup box. This happens twice before 
the program will start.

Anyone have this problem too?

Thanks,
Elan - WB2IOL
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 and Vista

[n4csitwo]

A ham friend is having a problem with SATPC32. He didn't know what version he 
is running. His computer is running Vista and when he tries to load SATPC32, he 
gets a prompt that mentions a "64 bit" problem. Sorry to be so vague, but I'm 
getting this second hand. Has anyone had a problem that sounds similiar to this 
and if so, can you share any advice on how you solved it?

Thanks,

Dave, AA4KN
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 stopped working!

[Larry Gerhardstein]

My SatPC32 stopped working.  I get an error message "Warnung: No source 
file was found for group Standard.  Please select a source file for this 
group after the 'OK'.  IMPORTANT: In orcer to store the filename for 
later starts open the menu 'Satelliten' and click on the 'OK' - button.


The SatPC32 application sort of comes up but there is nothing in its window.

What am I supposed to do?  SatPC32ISS gives the same problem with the 
word 'ISS' substituted for 'Standard'.  Should I reinstall?


Larry W7IN

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 & Easy Com

[Lawn, Richard]

Can anyone tell me if SatPC32 works with Easy Com style rotor interfaces?
Rick
W2JAZ


___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Help Needed

[Guy Brauning]

Thanks for reading this.  I recently installed SatPC32 from an AMSAT
purchased CD onto a new WIN 7 laptop with a dual-core Pentium processor.
The laptop is interfaced with a Yaesu FT-857D for 144MHZ and a Yaesu FT-897D
for 432 MHZ.  The interface is via a STAR-TECH Express Card serial adapter
which provides 2 COM ports.  The program installed properly, I updated the
KEPs file, and the program controls the radios.  My problem is that I can't
fine tune the Doppler shift properly for my set-up.  I have tried using the
CAT Tuning dialog box to adjust the Downlink in order to hear my own CW
signal in the downlink, then reset the downlink adjustment to zero, and then
adjust the Uplink by the same frequency amount in the opposite direction,
and then save the uplink calibration.  I was able to get AO-7 mode B working
pretty well using this technique; however, for VO-52 even when I adjust the
downlink to hear myself and then change the uplink and store the change, my
signal is no longer heard in the downlink... even before saving any changes,
I have to continually adjust the downlink in order to hear my own signal as
my signal will move out of the downlink I can't seem to find the correct
Doppler corrected frequency pair... I thought that once I adjusted the
downlink so that my signal was peaked that that would be a constant
"correction" throughout the pass.Are there other adjustments that I need
to try in addition to the uplink calibration?  FO-29 is even harder to try
and figure out than AO-7 and VO-52.   Is anyone else using two Yaesu FT-817
/ 857 / 897 rigs with SatPC32?  If so, what do you think I am doing wrong
and what are your DOPPLER.SQF data lines for AO-7, VO-52, and FO-29 (as well
as any other critical settings)?   I have been manually adjusting for
Doppler shift for about a year on the linear satellites but I never got
proficient enough to tune around the passband and answer other calls... I
just parked myself on an open frequency and called until someone answered
me.  I can greatly appreciate the benefits of Full Doppler Tuning, I just
can't seem to configure SatPC32 in order to take advantage of it!  I live in
central Maryland, FM-19.

 

Thanks for the help,

  Guy Brauning

  N3SCR

  guyjeanbr...@comcast.net

 

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 & Windows 7

[Bob Herrell]

  Hi all,

Anyone running and IC-910H with SatPC32 and Windows 7 64-bit? Everything 
seems to work except for the CAT function. I have the proper port 
selected for the radio, but cannot get CAT to do any controlling.

Any help would be appreciated.

Thanks & 73

Bob Herrell
AJ5C
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 rotor question

[Dave Webb KB1PVH]

I had this question posted to me, and I can't seem to figure out if it is
possible.


>.I want my rotator to stop at about 85 Deg elevation and not go to 90 ,
100 , 110 etc etc but to rotate on its asmith by >180 deg and then start to
drop elevation from 85 Deg..

 I know that the rotor interface unit, ERC can be limited via it's service
tool software, but I wasn't sure how SatPC32 would react to the interface
unit limiting it.

Dave - KB1PVH
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 question..& IC910H

[Ted]

I'm stumped..

 

I have CAT control turned on and ISS selected. In CAT control, I have 144.49
and 145.800 selected and that is what shows in the uplink/downlink widow
above the map. SATL function is on in the radio.

 

BUT, the top window on the radio shows 145.800, but the bottom window (vfo
a) shows 437.800.  I can't find a way to change that 

 

Any help appreciated.  SatPC is v 12.8b registered

 

73, Ted, K7TRK

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Add-On

[Thomas Doyle]

Here is a video demonstrating a feature I hoped to turn into a
SatPC32 Add-On. It is actually quite interesting and I think
it would be quite useful when giving demos.

The video is HD and looks best viewed full screen in 720p.

http://www.youtube.com/watch?v=g1K1sIw_F8Y

73 W9KE tom ...
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 Rotor Control

[Fraser Bonnett]

Has anyone made SatPC32 work with EA4TX's new ARS-USB controller?  If so,
how?

 

73, Fraser, W3UTD

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 frequency correction

[Lizeth Norman]

Hi all!
What is the easiest way to compensate for the frequency deviation of
the satellite in sat pc 32?
Going to the cat menu gives me several options.
I am in a maze of twisty passages all alike.
Which one is the right choice?
73 de Norm n3ykf
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 sqf adjustment

[Lizeth Norman]

Hi all!
What is the offset in satpc32 for AO-7? Will be up for the 9z ish pass.
73 es see you on the birds
n3ykf/oa4
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32 install problem

[Richard Lawn]

Trying to install on my MacBook Pro running win7 under boot camp fails
suggesting that I don't have admin permissions At login. I don't understand
how to get around this as I login with my password on boot up and don't
recall having this problem in the past. Suggestions?
Right clicking on setup doesn't seem to show the option I was looking for
either.
Rick
W2jaz
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 - amsat keps

[Mike Seguin]

I noticed today that SATPC32 failed on downloading keps from AMSAT.

I found the URL had changed to 
http://ww2.amsat.org/amsat/ftp/keps/current/nasa.all


(www was changed to ww2)

Is this a permanent change? Maybe this was in response to the rebuild 
post hack?


Mike
--

73,
Mike, N1JEZ
"A closed mouth gathers no feet"

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 & AO73 question

[Ted]

Hi all,

 

In spite of my usual ineptness with this program, I have managed to have it
talking to my FT-847, downloaded the keps for AO73 and appear to be tracking
it!!

 

However, I can't seem to get the radio to hold the up/dn frequencies in the
proper VFO's. I start out with the uplink showing in VFOA, but after a min
or so the frequencies swap and I have to use the a>http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 - New version

[Peter Wilson]

All,  

 

Please note there is a new version (12.8c) of SatPC32 available for
download. This version has a number of new features - like attaching the
"Countdown" window to the main window.

 

Thanks to everyone for helping me over the past few weeks with a number of
topics. I am now fully active on all satellites.

 

Peter

G8KEK

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] satpc32 %$#$ again

[Clayton Coleman]

Hi Bob,

Maybe just go back to using your OSCAR Locator?  There are overheads
developed for FO-29 and AO-7 to use with it.

73
Clayton
W5PFG


On Thu, Jun 5, 2014 at 2:49 PM, Bob- W7LRD  wrote:

> This is on different computer- I get Ungultige gleitkommaoperation
> marching across the screen.  I must shut the computer down to stop it.  I
> had just downloaded new keps.  The last time (other computer) I had to
> delete the entire program and start from scratch with everything.  Is there
> something I am doing/not doing??  Becoming a PITA to keep everything
> running.
> from the digitally challenged
> 73 Bob W7LRD
> ___
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] satpc32 problems

[Erich Eichmann]

Bob,
run the setup program "as administrator" even if you are the administrator.

There is a link on my website directly above the links that download  
the installation ZIP files:


Read this before you dowload one of the files, please 



Section B 1 d of the text says:
d. The folder also contains the setup program. Start it by double 
clicking on the filename.


_IMPORTANT: Under Vista and Windows 7 right click on the filename and 
from the menu that opens choose "Run as administrator".

_

73s, Erich, DK1TB




Am 06.06.2014 04:58, schrieb Bob- W7LRD:

Still attempting to make satpc32 work.  Removed it from hard drive, downloaded 
from Erics site, now get error 1925 not sufficient privileges etc etc.  The 
next sound you hear will be the computer flying out the window.  Assistance 
please.
from the digitally challanged
73 Bob W7LRD
___
Sent viaamsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings:http://amsat.org/mailman/listinfo/amsat-bb


___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] satpc32 %$#$ again

[PE0SAT | Amateur Radio]

Hi Bob,

I experience similar issues lately

ALT-F4 and windows task manager can help to prevent from rebooting your 
PC.


In my case this behaviour occurs when object ID's are changed or 
removed

from the kepler input files. Lately we had Kicksat, Phonesat and other
cubesats that burned up in the atmosphere and therefor where removed 
from

the DB.

To solve the issue I check and edit the satellite group files and 
remove them

by hand.

Some extra information for Erich:

I create my own kepler input files direct from Space Track (with the 
help from
HaloKepler) here an example 
(http://www.pe0sat.vgnet.nl/kepler/mykepler.txt)
and use multiple groups that use there own kepler input when object 
ID's are
no longer available or have changed and satellites are active in the 
group

file SatPC32 reacts with the message "Ungultige gleitkommaoperation"

Maybe it is possible to have SatPC32 act different when object ID's are
changed or removed from the kepler input file and active in one of the
group files.

73 Jan PE0SAT

On 05-06-2014 21:49, Bob- W7LRD wrote:

This is on different computer- I get Ungultige gleitkommaoperation
marching across the screen.  I must shut the computer down to stop
it.  I had just downloaded new keps.  The last time (other computer) I
had to delete the entire program and start from scratch with
everything.  Is there something I am doing/not doing??  Becoming a
PITA to keep everything running.
from the digitally challenged
73 Bob W7LRD
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the 
author.
Not an AMSAT-NA member? Join now to support the amateur satellite 
program!

Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


--
With regards PE0SAT
Internet web-page http://www.pe0sat.vgnet.nl/
DK3WN SatBlog http://www.dk3wn.info/p/
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] satpc32 problems

[Thomas Doyle]

Hi Bob,

The question raised by you and others reminded me of a simple little
program I wrote a couple of years ago and never released. Ashamed to say
that I gave into PITA when I could not figure out the link between a Group
and its associated tle data file (perhaps there is no external link). The
program seems to work but was abandoned when I gave up and decided to write
my own tracker. I am sure there are many other similar programs out there
but if you do not have one this might help. Please keep your computer on
the desk and far away from the window.

http://www.tomdoyle.org/satpc32checker

If you try this program and it works for you contact me. If you have
problems with it contact Bob :-)

73 W9KE Tom Doyle


On Thu, Jun 5, 2014 at 9:58 PM, Bob- W7LRD  wrote:

> Still attempting to make satpc32 work.  Removed it from hard drive,
> downloaded from Erics site, now get error 1925 not sufficient privileges
> etc etc.  The next sound you hear will be the computer flying out the
> window.  Assistance please.
> from the digitally challanged
> 73 Bob W7LRD
> ___
> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>



-- 

Sent from my computer.

tom ...
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] SatPC32 Question

[Erich Eichmann]

Hi Jerry,
I added the "Start with Gt+" feature in Febr. 2014 - a suggestion of 
Ron, W5RKN. Download the latest setup file or install the setup file you 
installed on your  Laptop also on your desktop PC.

73s, Erich, DK1TB

Am 09.06.2014 03:08, schrieb n0jy:

Hi All,

I just installed (upgraded) to SatPC32 v. 12.8c.

Now, I have two installations here.  One on my new laptop, and one on 
my desktop PC.  Laptop is for portable work, of course.
I noticed that on my laptop installation, on the SETUP menu OPTIONS 
dialog, there is a checkbox for GROUND TRACK.
This option does not exist on my desktop installation.  Same program, 
same settings otherwise...


I see these parameters are held in SATSTART.SQF.  I see + as the last 
entry (and it is one more entry than my desktop file has) which 
corresponds with the GROUND TRACK checkbox.
If I edit SATSTART.SQF on my desktop PC and add that +, when it starts 
it does not have GROUND TRACK turned on.  So I can't fool it.


Any thoughts, suggestions, help?

Thanks!
Jerry
NØJY
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite 
program!

Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] SatPC32 Question

[n0jy]

Hi Erich,

Yes!  I had downloaded but not yet installed (don't know why) 12.8c on 
my desktop PC back in January this year.
When I went to do the upgrade yesterday, I first was going to copy the 
zip file from the laptop but when I saw the same version already in the 
downloads on my desktop PC I just unzipped and ran that one.
So I redid things now with the June download of the zip file and 
everyone is happy!


Thanks for your time and help.

73,
Jerry
N0JY

On 6/9/2014 1:35 AM, Erich Eichmann wrote:

Hi Jerry,
I added the "Start with Gt+" feature in Febr. 2014 - a suggestion of 
Ron, W5RKN. Download the latest setup file or install the setup file 
you installed on your  Laptop also on your desktop PC.

73s, Erich, DK1TB

Am 09.06.2014 03:08, schrieb n0jy:

Hi All,

I just installed (upgraded) to SatPC32 v. 12.8c.

Now, I have two installations here.  One on my new laptop, and one on 
my desktop PC.  Laptop is for portable work, of course.
I noticed that on my laptop installation, on the SETUP menu OPTIONS 
dialog, there is a checkbox for GROUND TRACK.
This option does not exist on my desktop installation.  Same program, 
same settings otherwise...


I see these parameters are held in SATSTART.SQF.  I see + as the last 
entry (and it is one more entry than my desktop file has) which 
corresponds with the GROUND TRACK checkbox.
If I edit SATSTART.SQF on my desktop PC and add that +, when it 
starts it does not have GROUND TRACK turned on.  So I can't fool it.


Any thoughts, suggestions, help?

Thanks!
Jerry
NØJY
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite 
program!

Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb







___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SATPC32 - ISS portion

[Ted]

Been awhile since I used the program with my FT 847. Should changing the C
to C+ be putting the radio in CAT mode? It is not

 

Also looking for the red TX and RX buttons

 

Thanks, Ted

K7TRK

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Re: [amsat-bb] SatPC32 question

[Alan]

Hi Jim,

You are correct that you need to get the Keps in the same group to display them 
at the same time.
They will eventually migrate, and you can request that from Tim Kelso on his 
web site to speed the
process up.

As for seeing them simultaneously, use Multitrack.  First go to Satellites.  On 
the Selected list,
use the Show On/Off button to select the ones you want to see simultaneously.  
There will be an
asterisk in front of the name.  Exit back to the main page, and click the "M" 
in the upper left option
panel.  That will turn on Multitrack.

73s,

Alan
WA4SCA


<-Original Message-
mailto:amsat-bb-boun...@amsat.org] On Behalf 
Of Jim Heck
http://amsat.org/mailman/listinfo/amsat-bb

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] Satpc32 with 2 Transceivers

[Howard Kowall]

Good morning everyone
Trying to run Satpc32 with a FT897d and FT817nd
The ft897nd is on the uhf antenna and the ft817nd is on the vhf antenna
it all seems to work on the FM sats but having some problems with ssb sats 
AO7,VO52,FO29
The trouble I am having is on the calibration of the freq. and doppler adjument
has anyone run into this 
hopefully someone has a few pointers and tricks
Thanks to all who reply
Howard
VE4ISP

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 with 2 Transceivers

[Howard Kowall]

Hello to all
Well it has been resolved,got my FT897D and FT817ND working with Satpc32
and  I am now able to run 1 as downlink the other as uplink and the freq. 
calibration working.
I would like to thank all who replied to my problem and a very special thanks 
to Erich DK1TB who was able to supply me with a fix,providing me with a new 
Satpc32 exe file which did the trick,and another thanks to Tim N3TL for his 
help and input.
Hope to be able to have a QSO with a few of you on the Sat's
Thaks to all once again
Howard
VE4ISP
___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] satpc32 and labjack help

[Nick Pugh K5QXJ]

I have satpc32 and labjack is there a stall command option ?

 

Thanks

nick

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

[amsat-bb] SatPC32 V8 Doppler.SQF HELP

[K3RWN]

Can someone direct me to the location of the Doppler.SQF file in V8?

 

I cannot find the file in the SatPC32V8 directory.

 

In fact I cannot find any of the SQF files that are plentiful in V7.

 

I wanted to add the freqs for DO64 and SO67 and cannot seem to pull it off

 

Thanks in advance

 

Rich

 

___
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb