Re: [asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm
The problem was with ACPI screwing up interrupt routing. Added pci=routeirq to /boot/grub/grub.conf to turn off acpi for interrupt routing. Now I've got two green LEDs. Thanks to Jolan Luff for figuring this out! Jason :) >> On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wrote: >>> Hi there, >>> >>> I've got two Asterisk hosted PBX servers with Digium TE210P cards >>> attached by a E1 cable to Port 1 on each. On startup, both cards flash >>> red, alternating between ports 1 and 2. >>> >>> When server #1 loads the Zaptel module and drivers, Port 1 status LED >>> goes green. When server #2 loads the same module and drivers, Port 1 >>> status LED goes completely blank. Unloading the wct2xxp module causes >>> the flashing red LEDs to come back. >>> >>> I've tried swapping cable ends and cards between the two machines, but >>> the problem LED always stays with server #2. So, I think there is >>> something misconfigured with server #2, but the configuration file on >>> both servers is identical. >>> >>> zaptel.conf: >>> loadzone=uk >>> defaultzone=uk >>> >>> span=1,1,0,ccs,hdb3,crc4 >>> bchan=1-15,17-31 >>> dchan=16 >>> >>> span=2,0,0,ccs,hdb3,crc4 >>> bchan=32-46,48-62 >>> dchan=47 >>> >>> >>> Any clues what could cause a GREEN alarm on one end with a RED alarm on >>> the other and no LED light as soon as the wct2xxp driver is loaded? >>> >>> Thanks for the help, >>> Jason Carter >>> DLS Internet Services >>> ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm
Yes, both cards are jumpered for E1. Any other ideas? Jason :) James Texter wrote: > Have you checked to ensure the card in server #2 is jumpered for E1? > > On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wrote: >> Hi there, >> >> I've got two Asterisk hosted PBX servers with Digium TE210P cards >> attached by a E1 cable to Port 1 on each. On startup, both cards flash >> red, alternating between ports 1 and 2. >> >> When server #1 loads the Zaptel module and drivers, Port 1 status LED >> goes green. When server #2 loads the same module and drivers, Port 1 >> status LED goes completely blank. Unloading the wct2xxp module causes >> the flashing red LEDs to come back. >> >> I've tried swapping cable ends and cards between the two machines, but >> the problem LED always stays with server #2. So, I think there is >> something misconfigured with server #2, but the configuration file on >> both servers is identical. >> >> zaptel.conf: >> loadzone=uk >> defaultzone=uk >> >> span=1,1,0,ccs,hdb3,crc4 >> bchan=1-15,17-31 >> dchan=16 >> >> span=2,0,0,ccs,hdb3,crc4 >> bchan=32-46,48-62 >> dchan=47 >> >> >> Any clues what could cause a GREEN alarm on one end with a RED alarm on >> the other and no LED light as soon as the wct2xxp driver is loaded? >> >> Thanks for the help, >> Jason Carter >> DLS Internet Services >> >> ___ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >>http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm
Have you checked to ensure the card in server #2 is jumpered for E1? On Thu, 2007-06-21 at 09:34 -0500, Jason K. Carter wrote: > Hi there, > > I've got two Asterisk hosted PBX servers with Digium TE210P cards > attached by a E1 cable to Port 1 on each. On startup, both cards flash > red, alternating between ports 1 and 2. > > When server #1 loads the Zaptel module and drivers, Port 1 status LED > goes green. When server #2 loads the same module and drivers, Port 1 > status LED goes completely blank. Unloading the wct2xxp module causes > the flashing red LEDs to come back. > > I've tried swapping cable ends and cards between the two machines, but > the problem LED always stays with server #2. So, I think there is > something misconfigured with server #2, but the configuration file on > both servers is identical. > > zaptel.conf: > loadzone=uk > defaultzone=uk > > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15,17-31 > dchan=16 > > span=2,0,0,ccs,hdb3,crc4 > bchan=32-46,48-62 > dchan=47 > > > Any clues what could cause a GREEN alarm on one end with a RED alarm on > the other and no LED light as soon as the wct2xxp driver is loaded? > > Thanks for the help, > Jason Carter > DLS Internet Services > > ___ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Zaptel wct2xxp driver causes LEDs to go black and RED alarm
Hi there, I've got two Asterisk hosted PBX servers with Digium TE210P cards attached by a E1 cable to Port 1 on each. On startup, both cards flash red, alternating between ports 1 and 2. When server #1 loads the Zaptel module and drivers, Port 1 status LED goes green. When server #2 loads the same module and drivers, Port 1 status LED goes completely blank. Unloading the wct2xxp module causes the flashing red LEDs to come back. I've tried swapping cable ends and cards between the two machines, but the problem LED always stays with server #2. So, I think there is something misconfigured with server #2, but the configuration file on both servers is identical. zaptel.conf: loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 Any clues what could cause a GREEN alarm on one end with a RED alarm on the other and no LED light as soon as the wct2xxp driver is loaded? Thanks for the help, Jason Carter DLS Internet Services ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users