RE: [Asterisk-Users] TE410P in Austria
Is it the same as Telstra -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Monday, 14 June 2004 8:11 PM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P in Austria hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another technics told me that it could be that i will need a different cable - could this be ? At time my configuration is: -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 loadzone=at defaultzone=at ---/etc/asterisk/zaptel.conf- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel = 1-15 channel = 17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel = 32-46 channel = 48-62 Another thing - for the wct4xxp module - do i really need to restart the whole pc so that changes in /etc/zaptel.conf take effect, or do i only need to reinsert the module - rerun ztcfg ? hope someone here can help me best regards Wolfgang ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P in Austria
sorry, i don't know what you mean with: Is it the same as Telstra - could you please clearify this ? wolfgang Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: Is it the same as Telstra -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Monday, 14 June 2004 8:11 PM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P in Austria hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another technics told me that it could be that i will need a different cable - could this be ? At time my configuration is: -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 loadzone=at defaultzone=at ---/etc/asterisk/zaptel.conf- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel = 1-15 channel = 17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel = 32-46 channel = 48-62 Another thing - for the wct4xxp module - do i really need to restart the whole pc so that changes in /etc/zaptel.conf take effect, or do i only need to reinsert the module - rerun ztcfg ? hope someone here can help me best regards Wolfgang ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P in Austria
Wolfgang, You need to use ccs not cas I would change your timing options to these:- -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,2,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 That should work At 12:33 14/06/2004 +0200, you wrote: sorry, i don't know what you mean with: Is it the same as Telstra - could you please clearify this ? wolfgang Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: Is it the same as Telstra -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Monday, 14 June 2004 8:11 PM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P in Austria hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another technics told me that it could be that i will need a different cable - could this be ? At time my configuration is: -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 loadzone=at defaultzone=at ---/etc/asterisk/zaptel.conf- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel = 1-15 channel = 17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel = 32-46 channel = 48-62 Another thing - for the wct4xxp module - do i really need to restart the whole pc so that changes in /etc/zaptel.conf take effect, or do i only need to reinsert the module - rerun ztcfg ? hope someone here can help me best regards Wolfgang ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P in Austria
I think you'll find that Telsta is an Australian telco, not Austrian! Only a few miles out :-) -- Chris -- E Mail: [EMAIL PROTECTED] SIP: [EMAIL PROTECTED] IAXTEL: 17003366726 On Mon, 14 Jun 2004, Wolfgang Pichler wrote: sorry, i don't know what you mean with: Is it the same as Telstra - could you please clearify this ? wolfgang Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: Is it the same as Telstra -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Monday, 14 June 2004 8:11 PM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P in Austria hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another technics told me that it could be that i will need a different cable - could this be ? At time my configuration is: -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 loadzone=at defaultzone=at ---/etc/asterisk/zaptel.conf- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel = 1-15 channel = 17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel = 32-46 channel = 48-62 Another thing - for the wct4xxp module - do i really need to restart the whole pc so that changes in /etc/zaptel.conf take effect, or do i only need to reinsert the module - rerun ztcfg ? hope someone here can help me best regards Wolfgang ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P in Austria
i've changed it now - but i still get the yellow alarm (i've changed it to: span=1,1,0,ccs,hdb3,crc4,yellow) this is my dmesg output after ztcfg -v - Found TE410P at base address 4010, remapped to d8b15000 TE410P version c01a009b FALC version: 0005, Board ID: 00 Reg 0: 0x124b1800 Reg 1: 0x124b1000 Reg 2: 0x07fc07fc Reg 3: 0x Reg 4: 0x Reg 5: 0x Reg 6: 0xc01a009b Reg 7: 0x1f00 Reg 8: 0x Reg 9: 0x00ff Reg 10: 0x TE410P: Launching card: 0 TE410P: Setting up global serial parameters Found a Wildcard: Wildcard TE410P-Xilinx Registered tone zone 9 (Austria) TE410P: Span 1 configured for CCS/HDB3/CRC4 SPAN 1: Primary Sync Source TE410P: Span 2 configured for CCS/HDB3/CRC4 SPAN 2: Secondary Sync Source wct4xxp: Setting yellow alarm on span 1 wct4xxp: Setting yellow alarm on span 2 --- any other ideas ? best regards Wolfgang Am Mo, den 14.06.2004 schrieb Jason Williams um 12:44: Wolfgang, You need to use ccs not cas I would change your timing options to these:- -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,2,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 That should work At 12:33 14/06/2004 +0200, you wrote: sorry, i don't know what you mean with: Is it the same as Telstra - could you please clearify this ? wolfgang Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: Is it the same as Telstra -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Monday, 14 June 2004 8:11 PM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P in Austria hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another technics told me that it could be that i will need a different cable - could this be ? At time my configuration is: -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 loadzone=at defaultzone=at ---/etc/asterisk/zaptel.conf- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel = 1-15 channel = 17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel = 32-46 channel = 48-62 Another thing - for the wct4xxp module - do i really need to restart the whole pc so that changes in /etc/zaptel.conf take effect, or do i only need to reinsert the module - rerun ztcfg ? hope someone here can help me best regards Wolfgang ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P in Austria
hi all, i have now enabled pri debugging with pri intense debug span so i get: Unnumbered frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000EA: 1 M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] 0 bytes of data Urgent handler Sending Set Asynchronous Balanced Mode Extended what does this all means ? best regards Wolfgang Am Mo, den 14.06.2004 schrieb Wolfgang Pichler um 14:06: i've changed it now - but i still get the yellow alarm (i've changed it to: span=1,1,0,ccs,hdb3,crc4,yellow) this is my dmesg output after ztcfg -v - Found TE410P at base address 4010, remapped to d8b15000 TE410P version c01a009b FALC version: 0005, Board ID: 00 Reg 0: 0x124b1800 Reg 1: 0x124b1000 Reg 2: 0x07fc07fc Reg 3: 0x Reg 4: 0x Reg 5: 0x Reg 6: 0xc01a009b Reg 7: 0x1f00 Reg 8: 0x Reg 9: 0x00ff Reg 10: 0x TE410P: Launching card: 0 TE410P: Setting up global serial parameters Found a Wildcard: Wildcard TE410P-Xilinx Registered tone zone 9 (Austria) TE410P: Span 1 configured for CCS/HDB3/CRC4 SPAN 1: Primary Sync Source TE410P: Span 2 configured for CCS/HDB3/CRC4 SPAN 2: Secondary Sync Source wct4xxp: Setting yellow alarm on span 1 wct4xxp: Setting yellow alarm on span 2 --- any other ideas ? best regards Wolfgang Am Mo, den 14.06.2004 schrieb Jason Williams um 12:44: Wolfgang, You need to use ccs not cas I would change your timing options to these:- -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,2,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 That should work At 12:33 14/06/2004 +0200, you wrote: sorry, i don't know what you mean with: Is it the same as Telstra - could you please clearify this ? wolfgang Am Mo, den 14.06.2004 schrieb Michael M. Saunders um 12:25: Is it the same as Telstra -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler Sent: Monday, 14 June 2004 8:11 PM To: Asterisk-Users Mailinglist Subject: [Asterisk-Users] TE410P in Austria hi all, i've now installed a TE410P (Quad T1/E1 Primary Card - Digium) and connected it to a primary line. My telco (eTel) only told me that they are using hdb3 and crc4. So i still don't know which coding i have to use (cas or ccs) - and what timing options i have to use. Have someone already get a card like this up in Austria with a line from eTel or from the telekom Austria ? Another technics told me that it could be that i will need a different cable - could this be ? At time my configuration is: -/etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-31 bchan=32-46 bchan=48-62 dchan=16 dchan=47 loadzone=at defaultzone=at ---/etc/asterisk/zaptel.conf- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel = 1-15 channel = 17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel = 32-46 channel = 48-62 Another thing - for the wct4xxp module - do i really need to restart the whole pc so that changes in /etc/zaptel.conf take effect, or do i only need to reinsert the module - rerun ztcfg ? hope someone here can help me best regards Wolfgang ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED]