Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Thomas Hupfeldt wrote: - Original Message - From: "Kristian Kielhofner" 10.x uses kernel 2.6. You should be able to use ztdummy much easier than zaprtc. use make linux26 (I think) with it. I still am not sure how you toasted your last install, but that MAY help... Actually I don't remember you ever saying that you were a newbie. Had I known that I probably wouldn't have had you touch the kernel! Ok, I will installe mandrake 10.1 instead.. :-) I also dont know what i did, but i does not work.. :o( It's not your fault, but mine.. :o) That right, i did'nt use the word newbie, but i wrote that I was quiet new in this.. :o) I return when i get mandrake 10.1 installed.. I thank you for your help so far.. Best Regards. Thomas Hupfeldt. By new in this, I though new to Asterisk, not to Linux. It will probably be easier to figure out Linux first, then Asterisk. I can't even imagine what both at the same time would be like! -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
- Original Message - From: "Kristian Kielhofner" > > 10.x uses kernel 2.6. You should be able to use ztdummy much easier > than zaprtc. use make linux26 (I think) with it. I still am not sure > how you toasted your last install, but that MAY help... Actually I > don't remember you ever saying that you were a newbie. Had I known that > I probably wouldn't have had you touch the kernel! Ok, I will installe mandrake 10.1 instead.. :-) I also dont know what i did, but i does not work.. :o( It's not your fault, but mine.. :o) That right, i did'nt use the word newbie, but i wrote that I was quiet new in this.. :o) I return when i get mandrake 10.1 installed.. I thank you for your help so far.. Best Regards. Thomas Hupfeldt. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Thomas Hupfeldt wrote: The reason to why i sad that i need to install it from scratch, was that i didnt knew to the rescue function on the cd's. Do any of you know, wheter it would help to installe the newest mandrake 10.1 instead of the v. 9.2 ? And as I said before, im a really newbe to linux, and there for i dont know hot to rescue it... Regards Thomas H. 10.x uses kernel 2.6. You should be able to use ztdummy much easier than zaprtc. use make linux26 (I think) with it. I still am not sure how you toasted your last install, but that MAY help... Actually I don't remember you ever saying that you were a newbie. Had I known that I probably wouldn't have had you touch the kernel! -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
- Original Message - From: "Kristian Kielhofner" > Dave Cotton wrote: > > > If I read it right that's what he did, the Mandrake CDs have a rescue > > kernel which could well be totally different once running it let's you > > straighten out problems. I used the cd to rescue my mandrake. :o| > He said that he needs to install it from scratch, and I hope that isn't > what he did. I know that Mandrake has a rescue function, or he could > have used a gentoo stage 1 to mount his old filesystems and chroot into > them, etc. I hope that he did! The reason to why i sad that i need to install it from scratch, was that i didnt knew to the rescue function on the cd's. Do any of you know, wheter it would help to installe the newest mandrake 10.1 instead of the v. 9.2 ? And as I said before, im a really newbe to linux, and there for i dont know hot to rescue it... Regards Thomas H. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Dave Cotton wrote: If I read it right that's what he did, the Mandrake CDs have a rescue kernel which could well be totally different once running it let's you straighten out problems. He said that he needs to install it from scratch, and I hope that isn't what he did. I know that Mandrake has a rescue function, or he could have used a gentoo stage 1 to mount his old filesystems and chroot into them, etc. I hope that he did! -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
On Tue, 2004-10-26 at 14:58 -0500, Kristian Kielhofner wrote: > Thomas Hupfeldt wrote: > > - Original Message - > > From: "Thomas Hupfeldt" > > > >>Hmm.. somehow i did a mistake, so my mandrake is fucked up.. > >>When i boot, i get this message: > >>Kelnel Panic: No Init found.. Try Passing init= option to kernel.. :o( > >> > >>Now i need to install it from scratch.. > > > > > > I resqued my mandrake using the mandrake cd. So Im running again. > > > > Regards > > Thomas H. :o) > > > > That wasn't necessary! You have booted a different kernel or manually > passed a new init= or root= on the command line! If I read it right that's what he did, the Mandrake CDs have a rescue kernel which could well be totally different once running it let's you straighten out problems. -- Dave Cotton <[EMAIL PROTECTED]> ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Thomas Hupfeldt wrote: - Original Message - From: "Thomas Hupfeldt" Hmm.. somehow i did a mistake, so my mandrake is fucked up.. When i boot, i get this message: Kelnel Panic: No Init found.. Try Passing init= option to kernel.. :o( Now i need to install it from scratch.. I resqued my mandrake using the mandrake cd. So Im running again. Regards Thomas H. :o) That wasn't necessary! You have booted a different kernel or manually passed a new init= or root= on the command line! -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
- Original Message - From: "Thomas Hupfeldt" > > Hmm.. somehow i did a mistake, so my mandrake is fucked up.. > When i boot, i get this message: > Kelnel Panic: No Init found.. Try Passing init= option to kernel.. :o( > > Now i need to install it from scratch.. I resqued my mandrake using the mandrake cd. So Im running again. Regards Thomas H. :o) ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Kristian Kielhofner wrote: > > The /configs/* error could be because that is a redhat thing. I assumed > that Mandrake followed redhat on that as well. > > I don't know enough about zaprtc to know what those compilation errors > mean. On mandrake, you may need to edit /boot/grub/menu.lst to boot > your new kernel (or you might be using lilo, in which case you need to > look it up. I haven't used lilo in years...). It is possible that the > Mandrake people may have patched the kernel so that it isn't possible to > build zaprtc against it, but I doubt it. Can someone who has done this > on Mandrake 9.2 confirm this? I don't even have a system to look at. > > > Run uname -r to see if you are using your new kernel or not. Also try > "modprobe rtc" and "lsmod | grep rtc" to see if you have rtc as a module > yet. Hmm.. somehow i did a mistake, so my mandrake is fucked up.. When i boot, i get this message: Kelnel Panic: No Init found.. Try Passing init= option to kernel.. :o( Now i need to install it from scratch.. Regards Thomas.. :o( ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Thomas Hupfeldt wrote: Kristian Kielhofner wrote: You want to make sure that /usr/src/linux points to /usr/src/linux-2.4.22-37mdk. Do this as root: ln -s /usr/src/linux-2.4.22-37mdk /usr/src/linux Done On Mandrake standard kernels, I don't think that rtc is a module by default. Do this after running the above command: grep -i rtc /usr/src/linux/configs/* Does'nt work.. There is not a directory called configs.. and if CONFIG_RTC=y, then you need to recompile your kernel so that CONFIG_RTC=m. Do this by doing uname -r and seeing which kernel you have. Copy that config from /usr/src/linux/configs to /usr/src/linux/.config Then: the .config file was placed in the /linux/ folder.. 1) cd /usr/src/linux done 2) vi .config (change CONFIG_RTC=y to CONFIG_RTC=m) I cant find this line.. I checked all 2000 lines, but i could'nt find it. So i wrote it and saved the file. 3) Change the Makefile so that EXTRAVERSION (line 4) reflects your new version Done 4) make oldconfig && make oldconfig && make dep && make install done.. This takes several minutes 5) make sure that /boot/grub/grub.conf shows your new kernel grub.conf does not exist.. 6) reboot Done 7) if everything morks, make the new kernel the default by updating /boot/grub/grub.conf every things works.. i think.. but I cant update the grub.conf, because it didnt exist. 8) Try to rebuild zaprtc. :o( Still doesnt work.. Best Regards Thomas H. The /configs/* error could be because that is a redhat thing. I assumed that Mandrake followed redhat on that as well. I don't know enough about zaprtc to know what those compilation errors mean. On mandrake, you may need to edit /boot/grub/menu.lst to boot your new kernel (or you might be using lilo, in which case you need to look it up. I haven't used lilo in years...). It is possible that the Mandrake people may have patched the kernel so that it isn't possible to build zaprtc against it, but I doubt it. Can someone who has done this on Mandrake 9.2 confirm this? I don't even have a system to look at. Run uname -r to see if you are using your new kernel or not. Also try "modprobe rtc" and "lsmod | grep rtc" to see if you have rtc as a module yet. -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Kristian Kielhofner wrote: > > You want to make sure that /usr/src/linux points to > /usr/src/linux-2.4.22-37mdk. Do this as root: > > ln -s /usr/src/linux-2.4.22-37mdk /usr/src/linux Done > On Mandrake standard kernels, I don't think that rtc is a module by > default. Do this after running the above command: > > grep -i rtc /usr/src/linux/configs/* Does'nt work.. There is not a directory called configs.. > and if CONFIG_RTC=y, then you need to recompile your kernel so that > CONFIG_RTC=m. > > Do this by doing uname -r and seeing which kernel you have. Copy that > config from /usr/src/linux/configs to /usr/src/linux/.config Then: the .config file was placed in the /linux/ folder.. > 1) cd /usr/src/linux done > 2) vi .config (change CONFIG_RTC=y to CONFIG_RTC=m) I cant find this line.. I checked all 2000 lines, but i could'nt find it. So i wrote it and saved the file. > 3) Change the Makefile so that EXTRAVERSION (line 4) reflects your new > version Done > 4) make oldconfig && make oldconfig && make dep && make install done.. This takes several minutes > 5) make sure that /boot/grub/grub.conf shows your new kernel grub.conf does not exist.. > 6) reboot Done > 7) if everything morks, make the new kernel the default by updating > /boot/grub/grub.conf every things works.. i think.. but I cant update the grub.conf, because it didnt exist. > 8) Try to rebuild zaprtc. :o( Still doesnt work.. Best Regards Thomas H. Here are what happens (some of the text): from /usr/src/linux/include/linux/mc146818rtc.h:14, from zaprtc.c:66: /usr/src/linux/include/asm/pgalloc.h:78:20: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:79:17: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h: In function `get_pgd_fast': /usr/src/linux/include/asm/pgalloc.h:79: error: invalid lvalue in assignment /usr/src/linux/include/asm/pgalloc.h:81:17: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:81: error: invalid lvalue in decrement /usr/src/linux/include/asm/pgalloc.h:89:49: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:90:9: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h: In function `free_pgd_fast': /usr/src/linux/include/asm/pgalloc.h:90: error: invalid lvalue in assignment /usr/src/linux/include/asm/pgalloc.h:91:9: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:91: error: invalid lvalue in increment /usr/src/linux/include/asm/pgalloc.h:103:37: invalid suffix "ccb8" on integer constant /usr/src/linux/include/asm/pgalloc.h: In function `free_pgd_slow': /usr/src/linux/include/asm/pgalloc.h:103: error: called object is not a function /usr/src/linux/include/asm/pgalloc.h: In function `pte_alloc_one': /usr/src/linux/include/asm/pgalloc.h:113: error: called object is not a function /usr/src/linux/include/asm/pgalloc.h:117:25: invalid suffix "d59d01" on integer constant /usr/src/linux/include/asm/pgalloc.h:117: error: called object is not a function /usr/src/linux/include/asm/pgalloc.h:127:37: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:128:17: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h: In function `pte_alloc_one_fast': /usr/src/linux/include/asm/pgalloc.h:128: error: invalid lvalue in assignment /usr/src/linux/include/asm/pgalloc.h:130:17: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:130: error: invalid lvalue in decrement /usr/src/linux/include/asm/pgalloc.h:137:49: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:138:9: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h: In function `pte_free_fast': /usr/src/linux/include/asm/pgalloc.h:138: error: invalid lvalue in assignment /usr/src/linux/include/asm/pgalloc.h:139:9: invalid suffix "a8db2ac" on integer constant /usr/src/linux/include/asm/pgalloc.h:139: error: invalid lvalue in increment /usr/src/linux/include/asm/pgalloc.h:144:37: invalid suffix "ccb8" on integer constant /usr/src/linux/include/asm/pgalloc.h: In function `pte_free_slow': /usr/src/linux/include/asm/pgalloc.h:144: error: called object is not a function In file included from /usr/src/linux/include/linux/vmalloc.h:8, from /usr/src/linux/include/asm/io.h:47, from /usr/src/linux/include/linux/mc146818rtc.h:14, from zaprtc.c:66: /usr/src/linux/include/linux/highmem.h:105:33: invalid suffix "b0fd3c5" on integer constant In file included from /usr/src/linux/include/linux/vmalloc.h:8, from /usr/src/linux/include/asm/io.h:47, from /usr/src/linux/include/linux/mc146818rtc.h:14, from zaprtc.c:66: /usr/src/linux/include/linux/highmem.h: In function `memclear_highpage_flush': /usr/src/linux/include/linux/highme
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Thomas Hupfeldt wrote: Thanks for the fast reply.. Hmm.. in some way, i think there is something wrong.. If I run rpm -q kernel and kernel-source i get the message: Package is not installed.. I the used the graphical interface, and got them installed. Now i get the message: rpm -q kernel: Not installed and rpm -q kernel-source: kernel-source-2.4.22-37mdk When i run modprobe rtc, nothing happens. In the linux (/usr/src/ vi linux), there is this line: "= /usr/src/linux-2.4.22-37mdk/ and there are a directory called linux-2.4.22-37mdk/ If i has midunderstood something, please give me a hint.. Best Regards Thomas Hupfeldt. Thomas, You want to make sure that /usr/src/linux points to /usr/src/linux-2.4.22-37mdk. Do this as root: ln -s /usr/src/linux-2.4.22-37mdk /usr/src/linux On Mandrake standard kernels, I don't think that rtc is a module by default. Do this after running the above command: grep -i rtc /usr/src/linux/configs/* and if CONFIG_RTC=y, then you need to recompile your kernel so that CONFIG_RTC=m. Do this by doing uname -r and seeing which kernel you have. Copy that config from /usr/src/linux/configs to /usr/src/linux/.config Then: 1) cd /usr/src/linux 2) vi .config (change CONFIG_RTC=y to CONFIG_RTC=m) 3) Change the Makefile so that EXTRAVERSION (line 4) reflects your new version 4) make oldconfig && make oldconfig && make dep && make install 5) make sure that /boot/grub/grub.conf shows your new kernel 6) reboot 7) if everything morks, make the new kernel the default by updating /boot/grub/grub.conf 8) Try to rebuild zaprtc. -- Kristian Kielhofner ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem getting zaprtc installed on a mandrake9.2
Kristian Kielhofner wrote: > > Do a rpm -q kernel and rpm -q kernel-source and make sure that they > match. Do modprobe rtc and see if it loads. Check and make sure that > /usr/src/linux is valid and points to the correct location. Many times > redhat and mandrake distros setup /usr/src/linux-2.4 but not the > /usr/src/linux symlink. Thanks for the fast reply.. Hmm.. in some way, i think there is something wrong.. If I run rpm -q kernel and kernel-source i get the message: Package is not installed.. I the used the graphical interface, and got them installed. Now i get the message: rpm -q kernel: Not installed and rpm -q kernel-source: kernel-source-2.4.22-37mdk When i run modprobe rtc, nothing happens. In the linux (/usr/src/ vi linux), there is this line: "= /usr/src/linux-2.4.22-37mdk/ and there are a directory called linux-2.4.22-37mdk/ If i has midunderstood something, please give me a hint.. Best Regards Thomas Hupfeldt. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
