date:20100625

If your ANI is +212555, and you wanted to keep 7 digits ANI, then it
would be something like this:

rule 1 /^\+212\(555\)/ /\1/




On Fri, Jun 25, 2010 at 10:03 PM, Mark  wrote:

> I'm trying to strip + from the calling number while a router is in SRST
> mode and phones dial outbound to the PSTN.  I can't find a translation rule
> that does this. Does such a rule exist?  Otherwise, how would you strip +
> from the e.164 format in SRST?
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Strip + from calling number (SRST)

2010-06-25 Thread Mark

I'm trying to strip + from the calling number while a router is in SRST mode 
and phones dial outbound to the PSTN.  I can't find a translation rule that 
does this. Does such a rule exist?  Otherwise, how would you strip + from the 
e.164 format in SRST?

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Taking the written Monday!

2010-06-25 Thread Jeff Garvas

Renewing mine Wednesday morning.  Look forward to your report.
--
sent from my droid incredible

On Jun 25, 2010 6:53 PM, "Rob"  wrote:

I am taking the written test on Monday at Cisco Live in Vegas.  I will post
how I did when I get back.

I want to thank you for sharing your knowledge here, it has truly been
helpful to my studies!

Rob

___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Taking the written Monday!

2010-06-25 Thread Rob

I am taking the written test on Monday at Cisco Live in Vegas.  I will post
how I did when I get back.

I want to thank you for sharing your knowledge here, it has truly been
helpful to my studies!

Rob
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Transcoder/Conf MRG

Hahahahah, Thank you Jeff.

On Fri, Jun 25, 2010 at 6:23 PM, Jeff Price (jeffpric)
wrote:

>  I would say better to put them in MRGs and then MRGLs.  Although both
> would work, its better have control over who can access them.
>
>
>
> For example – HQ_R1_CONF_MRG, BR1_R2_XCODE_MRG
>
>
>
> Then create separate MRGLs with the same MRGs in them:
>
> HQ_MRGL – HQ_R1_CONF_MRG, BR1_R2_XCODE_MRG
>
> BR1_MRGL – HQ_R1_CONF_MRG, BR1_R2_XCODE_MRG
>
>
>
> However, for the exam purposes, it may just be easier to leave out for time
> J
>
>
>
> Jeff
>
>
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bo Gao
> *Sent:* Friday, June 25, 2010 6:06 PM
> *To:* OSL
> *Subject:* [OSL | CCIE_Voice] Transcoder/Conf MRG
>
>
>
> If I want HQ, BR1, and BR2 all share one HD conference bridge and one HD
> transcoder, will it be better if I just leave these resources in the default
> null MRG, or assign them into the HQ_MRG, BR1_MRG, and BR2_MRG?
>
>
>
> Thanks,
>
>
>
>
> Bo
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Transcoder/Conf MRG

2010-06-25 Thread Jeff Price (jeffpric)

I would say better to put them in MRGs and then MRGLs.  Although both
would work, its better have control over who can access them.

 

For example - HQ_R1_CONF_MRG, BR1_R2_XCODE_MRG

 

Then create separate MRGLs with the same MRGs in them:

HQ_MRGL - HQ_R1_CONF_MRG, BR1_R2_XCODE_MRG

BR1_MRGL - HQ_R1_CONF_MRG, BR1_R2_XCODE_MRG

 

However, for the exam purposes, it may just be easier to leave out for
time J

 

Jeff

 

From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bo Gao
Sent: Friday, June 25, 2010 6:06 PM
To: OSL
Subject: [OSL | CCIE_Voice] Transcoder/Conf MRG

 

If I want HQ, BR1, and BR2 all share one HD conference bridge and one HD
transcoder, will it be better if I just leave these resources in the
default null MRG, or assign them into the HQ_MRG, BR1_MRG, and BR2_MRG?

 

Thanks,

 


Bo

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Transcoder/Conf MRG

If I want HQ, BR1, and BR2 all share one HD conference bridge and one HD
transcoder, will it be better if I just leave these resources in the default
null MRG, or assign them into the HQ_MRG, BR1_MRG, and BR2_MRG?

Thanks,


Bo
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Vol2 Lab1 6.1 - Weird MOH from flash

2010-06-25 Thread kobel

I see no other reason for MoH not working for specific PSTN lines.
Make sure you understand your call routing correctly - e.g. debug isdn q931
to confirm that the calls go through the right gateway. Calls may be routed
via different gateway that you think.

Else:
 * Have you tried the service parameter I mentioned (on both MOH servers)?
 * Make sure your H.323 gateway is configured with voice class codec
allowing g711

On Sat, Jun 26, 2010 at 2:00 AM, Tam Nhu  wrote:

> Hi Kobel,
>
> Thanks for your input.  All those codec, region, dp, etc are settings
> correctly, including the gateway.
>
> As I mentioned in Bold, *only call to that particular PSTN line #2 (HQ
> local PSTN # 212-394-2123) is having 'beep' on-hold.  All other calls are
> working fine*...that's weird.
>
> I run the debug ccm-man mus all and see that for the bad 'beep' moh, it did
> not find the moh destination ip address.
>
> Below are the output samples of 'bad moh' (call to 3942123) and 'good moh'
> (call to 911)
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Vol2 Lab1 6.1 - Weird MOH from flash

2010-06-25 Thread Tam Nhu

IE_Voice] allManager 4.1(3) Can I run a SQL query to
>force logout everyone Extension Mobility?
> Message-ID:
>
>  <4e38db0a1959b04c8c83edcf069b53ed0c60835...@usispclexdb01.na.didata.local
> >
>
> Content-Type: text/plain; charset="us-ascii"
>
>
> In CallManager 4.1(3) is there a way to force logout everyone?
>
>
>
> -
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
> -- next part --
> An HTML attachment was scrubbed...
> URL: <
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100625/bd68465b/attachment-0001.html
> >
>
> --
>
> Message: 2
> Date: Fri, 25 Jun 2010 14:55:23 -0700
> From: Mark 
> To: Mark 
> Cc: OSL osl 
> Subject: Re: [OSL | CCIE_Voice] CUE/CCM JTapi and MWI
> Message-ID: <068c2aaa-2f30-4740-903a-5addfcb47...@markholloway.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Ok, I found my mistake.  Thanks to the nice bold warning in the solutions
> guide for lab 5.  DO NOT FORGET TO ASSIGN YOUR CTI PORTS TO A CSS OR YOU
> WILL HAVE MWI PROBLEMS.
>
>
> On Jun 25, 2010, at 2:09 PM, Mark wrote:
>
> > Codec is G711u, but there is no MWI range. As I mentioned, the Cisco docs
> state that if you are using JTAPI to integrate CUE into UCM there is not
> need for MWI numbers.
> >
> > Anyone else have a suggestion?
> >
> >
> > On Jun 25, 2010, at 11:02 AM, Ashar Siddiqui wrote:
> >
> >> few checks :
> >>
> >> - Codec under voicemail Voip dialpeer should be g711ulaw
> >> - add incoming-called number at CUE Voip dialpeer (your MWI range)
> >> - Remove voice class codec 1 - if you are using it under a default
> incoming voip dialpeer
> >> - Make sure you edit MWI application at CUE with your MWI ON and MWI OFF
> >>
> >> HTH
> >>
> >> Ash>
> >>
> >> Mark Holloway wrote:
> >>>
> >>> Anyone have any luck getting MWI to work when CUE is integrated with
> CCM?  According to Cisco's documentation you do not need MWI numbers when
> JTAPI is used.  Voicemail is working as expected but I cannot get MWI to
> light up on the phones using that are using the UCM Voicemail Profile I have
> created for CUE (assigned to Br2Ph1 and Br2Ph2).
> >>>
> >>> CUE successfully shows that it is registered with the CTI Route Point
> which explains why Voicemail works.  My Application User (JTAPI-CUE) has the
> CTI Route Point and additional 3 ports associated with it under Controlled
> Devices and I have assigned Standard CTI User under Permissions Information.
>  I even ticked "Accept Unsolicited Notification" but that didn't make a
> difference. I appreciate any assistance..
> >>>
> >>>
> >>> ccn subsystem jtapi
> >>>  ctiport 3111 3112 3113
> >>>  ccm-manager address 10.10.210.11 10.10.210.10
> >>>  ccm-manager credentials hidden
> "kqp8kECeSyBmpARJPQkSHY8Uxj6U33PNSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
> >>>  end subsystem
> >>>
> >>> ccn subsystem sip
> >>>  gateway address "10.57.126.1"
> >>>  mwi sip unsolicited
> >>>  end subsystem
> >>>
> >>> ccn trigger http urlname msgnotifytrg
> >>>  application "msgnotification"
> >>>  enabled
> >>>  maxsessions 2
> >>>  end trigger
> >>>
> >>> ccn trigger http urlname mwiapp
> >>>  application "ciscomwiapplication"
> >>>  enabled
> >>>  maxsessions 1
> >>>  end trigger
> >>>
> >>> ccn trigger jtapi phonenumber 3110
> >>>  application "voicemail"
> >>>  enabled
> >>>  maxsessions 3
> >>>  end trigger
> >>>
> >>> ccn trigger sip phonenumber 3110
> >>>  application "voicemail"
> >>>  enabled
> >>>

Re: [OSL | CCIE_Voice] Cisco Live

2010-06-25 Thread Jeff Garvas

Vik,

Will there be any IPexpert parties at the palms?   Any give aways? :-)

-Jeff

On Fri, Jun 25, 2010 at 7:40 PM, Vik Malhi  wrote:

>  Hope to put some faces to familiar names at Cisco Live next week. Let me
> know if you are going.
>
> For those of you not attending you can follow our updates on twitter *
> @ipexpertvoice*. Some members of our team will be present in the CCIE
> Voice techtorial and we will be sure to pass on any relevant information.
> --
> Vik Malhi – CCIE #13890
> Managing Partner / Instructor - IPexpert, Inc.
> Mailto: *vma...@ipexpert.com
> *Telephone: +1.810.326.1444 ext 420
> Fax: +1.810.454.0130
> Live Assistance, Please visit: www.ipexpert.com/chat <*
> http://www.ipexpert.com/chat*>
>
> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
> training locations throughout the United States, Europe, South Asia and
> Australia. Be sure to visit our online communities at
> www.ipexpert.com/communities <*http://www.ipexpert.com/communities*>  and
> our public website at www.ipexpert.com <*http://www.ipexpert.com/*>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Cisco Live

2010-06-25 Thread Vik Malhi

Hope to put some faces to familiar names at Cisco Live next week. Let me
know if you are going.

For those of you not attending you can follow our updates on twitter
@ipexpertvoice. Some members of our team will be present in the CCIE Voice
techtorial and we will be sure to pass on any relevant information.
-- 
Vik Malhi  CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Live Assistance, Please visit: www.ipexpert.com/chat


IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
CCIE (R&S, Voice, Security & Service Provider) certification(s) with
training locations throughout the United States, Europe, South Asia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities   and our
public website at www.ipexpert.com 


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Vol2 Lab1 6.1 - Weird MOH from flash

2010-06-25 Thread kobel

sorry, I lied to you - MOH server is selected from the MOH-listener's MRGL
(GW is your case). The MOH initiatior only decides about the source to be
used. I guess it's time to bed ;)

anyway, it looks like a multicast moh codec problem. you can also choose to
enable g729 for the IP media streaming service. you would get this
behaviour, when g729 multicast moh stream is needed and IP media streaming
service can't generate it.

On Sat, Jun 26, 2010 at 1:02 AM, kobel  wrote:

> It looks like one of your gateway can receive correct multicast moh stream
> and the other not.
> I'd have a look at region settings between the MOH server (which is
> selected from MOH-initiating IP phone MRGL) and the gateways. For multicast
> you'd normally always want ulaw to be choosed (multicast MOH server should
> have g711-to-all region).
>
> HTH
> kobel
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Vol2 Lab1 6.1 - Weird MOH from flash

2010-06-25 Thread kobel

It looks like one of your gateway can receive correct multicast moh stream
and the other not.
I'd have a look at region settings between the MOH server (which is selected
from MOH-initiating IP phone MRGL) and the gateways. For multicast you'd
normally always want ulaw to be choosed (multicast MOH server should have
g711-to-all region).

HTH
kobel

On Sat, Jun 26, 2010 at 12:17 AM, Tam Nhu  wrote:

> Not sure if someone has already run into this weird issue with MoH from
> flash.
>
> I've configured the Multicast MoH for both HQ H323 and BR1 MGCP gateways
> and they are working fine.  Only that I am running into a weird issue when
> making outbound calls from any HQ phones to *PSTN phone line #2
> (212-394-2123)*, and press Hold on HQ phone, it gives me a 'beep' moh.  
> *However,
> all calls to any other PSTN lines (911, 8632683, etc) are working fine*.
> Moreover, I tested from BR1 phones to this PSTN line #2 and moh working fine
> as well.  So I don't think any issues with the PSTN phone or Multicast MoH
> configurations.  But don't know why I got 'beep' on hold just for that line
> from HQ phone...just weird.
>
> I reboot the router, restarted the IP VMS App service, reset all
> devices..still come up with the same problem..
>
> I first don't think it is a big deal..who care.  However, I sit back and
> though "what happen in my real lab and if the proctor test your MoH, and he
> accidentally hit that weird line or problem"...I would have a big ZERO point
> for that, don't I?
>
> Any suggestions?
>
> Thanks,
> Tam Nhu.
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Vol2 Lab1 6.1 - Weird MOH from flash

2010-06-25 Thread Tam Nhu

Not sure if someone has already run into this weird issue with MoH from
flash.

I've configured the Multicast MoH for both HQ H323 and BR1 MGCP gateways and
they are working fine.  Only that I am running into a weird issue when
making outbound calls from any HQ phones to *PSTN phone line #2
(212-394-2123)*, and press Hold on HQ phone, it gives me a 'beep' moh.
 *However,
all calls to any other PSTN lines (911, 8632683, etc) are working fine*.
Moreover, I tested from BR1 phones to this PSTN line #2 and moh working fine
as well.  So I don't think any issues with the PSTN phone or Multicast MoH
configurations.  But don't know why I got 'beep' on hold just for that line
from HQ phone...just weird.

I reboot the router, restarted the IP VMS App service, reset all
devices..still come up with the same problem..

I first don't think it is a big deal..who care.  However, I sit back and
though "what happen in my real lab and if the proctor test your MoH, and he
accidentally hit that weird line or problem"...I would have a big ZERO point
for that, don't I?

Any suggestions?

Thanks,
Tam Nhu.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CUE/CCM JTapi and MWI

2010-06-25 Thread Mark

Ok, I found my mistake.  Thanks to the nice bold warning in the solutions guide 
for lab 5.  DO NOT FORGET TO ASSIGN YOUR CTI PORTS TO A CSS OR YOU WILL HAVE 
MWI PROBLEMS.


On Jun 25, 2010, at 2:09 PM, Mark wrote:

> Codec is G711u, but there is no MWI range. As I mentioned, the Cisco docs 
> state that if you are using JTAPI to integrate CUE into UCM there is not need 
> for MWI numbers.  
> 
> Anyone else have a suggestion?
> 
> 
> On Jun 25, 2010, at 11:02 AM, Ashar Siddiqui wrote:
> 
>> few checks :
>> 
>> - Codec under voicemail Voip dialpeer should be g711ulaw
>> - add incoming-called number at CUE Voip dialpeer (your MWI range)
>> - Remove voice class codec 1 - if you are using it under a default incoming 
>> voip dialpeer
>> - Make sure you edit MWI application at CUE with your MWI ON and MWI OFF
>> 
>> HTH
>> 
>> Ash>
>> 
>> Mark Holloway wrote:
>>> 
>>> Anyone have any luck getting MWI to work when CUE is integrated with CCM?  
>>> According to Cisco's documentation you do not need MWI numbers when JTAPI 
>>> is used.  Voicemail is working as expected but I cannot get MWI to light up 
>>> on the phones using that are using the UCM Voicemail Profile I have created 
>>> for CUE (assigned to Br2Ph1 and Br2Ph2).  
>>> 
>>> CUE successfully shows that it is registered with the CTI Route Point which 
>>> explains why Voicemail works.  My Application User (JTAPI-CUE) has the CTI 
>>> Route Point and additional 3 ports associated with it under Controlled 
>>> Devices and I have assigned Standard CTI User under Permissions 
>>> Information.  I even ticked "Accept Unsolicited Notification" but that 
>>> didn't make a difference. I appreciate any assistance.. 
>>>  
>>> 
>>> ccn subsystem jtapi
>>>  ctiport 3111 3112 3113 
>>>  ccm-manager address 10.10.210.11 10.10.210.10 
>>>  ccm-manager credentials hidden 
>>> "kqp8kECeSyBmpARJPQkSHY8Uxj6U33PNSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
>>>  end subsystem
>>> 
>>> ccn subsystem sip
>>>  gateway address "10.57.126.1"
>>>  mwi sip unsolicited
>>>  end subsystem
>>> 
>>> ccn trigger http urlname msgnotifytrg
>>>  application "msgnotification"
>>>  enabled
>>>  maxsessions 2
>>>  end trigger
>>> 
>>> ccn trigger http urlname mwiapp
>>>  application "ciscomwiapplication"
>>>  enabled
>>>  maxsessions 1
>>>  end trigger
>>> 
>>> ccn trigger jtapi phonenumber 3110
>>>  application "voicemail"
>>>  enabled
>>>  maxsessions 3
>>>  end trigger
>>> 
>>> ccn trigger sip phonenumber 3110
>>>  application "voicemail"
>>>  enabled
>>>  maxsessions 3
>>>  end trigger
>>> 
>>> 
>>> 
>>> 
>>> 
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please 
>>> visit www.ipexpert.com
>>> 
>>>   
>> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] allManager 4.1(3) Can I run a SQL query to force logout everyone Extension Mobility?

2010-06-25 Thread Jason Aarons (US)


In CallManager 4.1(3) is there a way to force logout everyone?



-
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CUE/CCM JTapi and MWI

2010-06-25 Thread Mark

Codec is G711u, but there is no MWI range. As I mentioned, the Cisco docs state 
that if you are using JTAPI to integrate CUE into UCM there is not need for MWI 
numbers.  

Anyone else have a suggestion?


On Jun 25, 2010, at 11:02 AM, Ashar Siddiqui wrote:

> few checks :
> 
> - Codec under voicemail Voip dialpeer should be g711ulaw
> - add incoming-called number at CUE Voip dialpeer (your MWI range)
> - Remove voice class codec 1 - if you are using it under a default incoming 
> voip dialpeer
> - Make sure you edit MWI application at CUE with your MWI ON and MWI OFF
> 
> HTH
> 
> Ash>
> 
> Mark Holloway wrote:
>> 
>> Anyone have any luck getting MWI to work when CUE is integrated with CCM?  
>> According to Cisco's documentation you do not need MWI numbers when JTAPI is 
>> used.  Voicemail is working as expected but I cannot get MWI to light up on 
>> the phones using that are using the UCM Voicemail Profile I have created for 
>> CUE (assigned to Br2Ph1 and Br2Ph2).  
>> 
>> CUE successfully shows that it is registered with the CTI Route Point which 
>> explains why Voicemail works.  My Application User (JTAPI-CUE) has the CTI 
>> Route Point and additional 3 ports associated with it under Controlled 
>> Devices and I have assigned Standard CTI User under Permissions Information. 
>>  I even ticked "Accept Unsolicited Notification" but that didn't make a 
>> difference. I appreciate any assistance.. 
>>  
>> 
>> ccn subsystem jtapi
>>  ctiport 3111 3112 3113 
>>  ccm-manager address 10.10.210.11 10.10.210.10 
>>  ccm-manager credentials hidden 
>> "kqp8kECeSyBmpARJPQkSHY8Uxj6U33PNSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
>>  end subsystem
>> 
>> ccn subsystem sip
>>  gateway address "10.57.126.1"
>>  mwi sip unsolicited
>>  end subsystem
>> 
>> ccn trigger http urlname msgnotifytrg
>>  application "msgnotification"
>>  enabled
>>  maxsessions 2
>>  end trigger
>> 
>> ccn trigger http urlname mwiapp
>>  application "ciscomwiapplication"
>>  enabled
>>  maxsessions 1
>>  end trigger
>> 
>> ccn trigger jtapi phonenumber 3110
>>  application "voicemail"
>>  enabled
>>  maxsessions 3
>>  end trigger
>> 
>> ccn trigger sip phonenumber 3110
>>  application "voicemail"
>>  enabled
>>  maxsessions 3
>>  end trigger
>> 
>> 
>> 
>> 
>> 
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>>   
> 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

2010-06-25 Thread Jason Aarons (US)

Credit go to Jane Ryer for the inital version/info, here is expanded info;

Customer didn't want music on hold to cross the WAN for a remote spoke site. 
They wanted music to multicast from the router flash card out a local PRI for 
the site and for it to work under CME-as-SRST.

1. ip multicast routing and ip pim dense-mode in router (does it need to go on 
int serial0/0/0:23 where the PRI is? It does need to go on the interface that 
has the 7900 phones)
2. ccm-manager music-on-hold | moh music-on-hold.au | multicast moh
239.1.1.3 port 16384  configured in router (you can use any private 
multicast address but has to match CallManager)(adding the interface fixed my 
MoH not working)
3. Enable Multicast Audio Sources on this CallManager MOH Server
4. CallManager MoH Server Base Multicast IP Address = 239.1.1.3
5. CallManager MoH Server Base Multicast Port Number = 16384
6. CallManager MoH Server Increment Multicast on = IP Address
7. CallManager MoH ServerMax Hops = 5 (or less if you want to keep it off WAN)
8. MOH Audio Source:  SampleAudioSource (1) = Allow Multicasting
9. In Media Resource Group =  Use Multicast for MOH Audio (requires at
least one multicast MOH resource)
10. Cisco IP Voice Media Streaming App = 711 mulaw and 729 Annex A
selected.
11. Media Resource Group List configured in Device Pool level with
appropriate MRG.
12.MOHMulticastResourceActive counter got incremented when put the call
On-Hold.
13. Verify you put the music-on-hold.au on the flash:

Smaple Running-config from IOS 15.0(1)XA3
ccm-manager music-on-hold
ccm-manager config server 10.10.55.133 (CallManager IP)
ccm-manager config
ccm-manager sccp local FastEthernet0/0

telephony-service
moh music-on-hold.au
multicast moh 239.1.1.11 port 16384 route 10.225.106.2

show ccm-manager music-on-hold
show ip mroute
show ip multicast interface
show ephone moh (only in SRST mode)



From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of naoufal kerboute
Sent: Friday, June 25, 2010 3:53 PM
To: Ashar Siddiqui
Cc: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

Hi Ashar,

I need to play in case to forget the stress of the lab, it's coming soon.
I think you are right the problem on the UCM side, I will try to restart the 
Media voice app and back to you.
The output of show ccm-manager music-on-hold

BR1-RTR#show ccm-manager music-on-hold
Current active multicast sessions : 0
So ucm didn't provide any multicast to the router.

Regards



De : Ashar Siddiqui [siddas...@gmail.com]
Date d'envoi : vendredi 25 juin 2010 18:51
À : naoufal kerboute
Cc : ccie_voice@onlinestudylist.com
Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1
First of all, why are you playing? You should be labbing properly as voice 
field is not a playground..

Joke aside... ;)

What is your "'show ccm-manager music-on-hold" ?

If no MoH streams are shown by this command then CCM has failed to provide the 
gateway with MoH

Also keep in mind Tone on hold means there is a CM misconfiguration. Silence 
means the RTP is not getting to the router.

Your case is CCM configuration issue. Check configuration again properly.

Check at Pub CCM > the MOH server - region/Device pool selected properly, reset 
it and then login to subscriber..go to the same place and reset it from there 
as well.

Also restart Media Voice app.

The output you posted means that you have proper telephony-service 
configuration (max-dn/max-ephone etc)...problem is at cucm side..

You can now continue playing..

Ash>

naoufal kerboute wrote:
Hi,

I'm playing with multicast moh over the flash of router, the configuration 
looks good and I can see in the debug the moh traffic, but on the PSTN phone I 
heard only bips.

below the output of debug ephone moh:
Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 
3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2


I've created a region who use g711 with other regions, activated the multicast 
on the source file and the moh server.


Any Ideas?





___

For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com






-
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in e

[OSL | CCIE_Voice] RE : RE : Multicast Moh from Flash of BR1

GOT IT

BR1-RTR#sh ccm-manager music-on-hold
Current active multicast sessions : 1
 Multicast   RTP port   Packets   Call   CodecIncoming
 Address number in/outid  Interface
===
239.1.1.1 16384   98/9849   g711ulaw  Lo0


I forgot to do a no mgcp / mgcp on the BR1 router :)
I've added the MRGL to the DP BR1 and it's associated to the gateway. so I had 
to restart the mgcp to take effect.

Thank you guys



De : ccie_voice-boun...@onlinestudylist.com 
[ccie_voice-boun...@onlinestudylist.com] de la part de naoufal kerboute 
[naoufal.kerbo...@cbi.ma]
Date d'envoi : vendredi 25 juin 2010 20:07
À : Ashar Siddiqui
Cc : ccie_voice@onlinestudylist.com
Objet : [OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

Hi Ashar,

I've tried what u told me but without success, also I've noticed that the call 
disconnected after 26 seconds

below the debug for ccm-manager music-on-hold all

BR1-RTR#debug ccm-manager music-on-hold all
Call Manager music-on-hold all debugging is on
BR1-RTR#
Jun 25 19:06:01.529: moh_update_rtp: callID 38 dstCallID -1
Jun 25 19:06:01.537: moh_update_rtp: callID 38 dstCallID 37
Jun 25 19:06:01.537: moh_update_rtp: callID 38 dstCallID 37
BR1-RTR#
Jun 25 19:06:03.885: moh_update_rtp: callID 38 dstCallID 37
Jun 25 19:06:03.885: moh_process_ccb: dstadr 192.168.10.22, callid 37, port 
25612,
codec 12, moh_en 0, moh_addr 0.0.0.0
Jun 25 19:06:03.889: moh_update_rtp: callID 38 dstCallID 37
BR1-RTR#
Jun 25 19:06:06.389: moh_update_rtp: callID 38 dstCallID 37
BR1-RTR#
Jun 25 19:06:31.393: moh_update_rtp: callID 38 dstCallID 37
Jun 25 19:06:31.409: moh_delete_ccb: called dstadr 0.0.0.0, callid 0

Any ideas?
May be the QoS??

Thank you


De : Ashar Siddiqui [siddas...@gmail.com]
Date d'envoi : vendredi 25 juin 2010 18:51
À : naoufal kerboute
Cc : ccie_voice@onlinestudylist.com
Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

First of all, why are you playing? You should be labbing properly as voice 
field is not a playground..

Joke aside... ;)

What is your "‘show ccm-manager music-on-hold" ?

If no MoH streams are shown by this command then CCM has failed to provide the 
gateway with MoH

Also keep in mind Tone on hold means there is a CM misconfiguration. Silence 
means the RTP is not getting to the router.

Your case is CCM configuration issue. Check configuration again properly.

Check at Pub CCM > the MOH server - region/Device pool selected properly, reset 
it and then login to subscriber..go to the same place and reset it from there 
as well.

Also restart Media Voice app.

The output you posted means that you have proper telephony-service 
configuration (max-dn/max-ephone etc)...problem is at cucm side..

You can now continue playing..

Ash>

naoufal kerboute wrote:
Hi,

I'm playing with multicast moh over the flash of router, the configuration 
looks good and I can see in the debug the moh traffic, but on the PSTN phone I 
heard only bips.

below the output of debug ephone moh:
Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 
3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2


I've created a region who use g711 with other regions, activated the multicast 
on the source file and the moh server.


Any Ideas?



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

Hi Ashar,

I've tried what u told me but without success, also I've noticed that the call 
disconnected after 26 seconds

below the debug for ccm-manager music-on-hold all

BR1-RTR#debug ccm-manager music-on-hold all
Call Manager music-on-hold all debugging is on
BR1-RTR#
Jun 25 19:06:01.529: moh_update_rtp: callID 38 dstCallID -1
Jun 25 19:06:01.537: moh_update_rtp: callID 38 dstCallID 37
Jun 25 19:06:01.537: moh_update_rtp: callID 38 dstCallID 37
BR1-RTR#
Jun 25 19:06:03.885: moh_update_rtp: callID 38 dstCallID 37
Jun 25 19:06:03.885: moh_process_ccb: dstadr 192.168.10.22, callid 37, port 
25612,
codec 12, moh_en 0, moh_addr 0.0.0.0
Jun 25 19:06:03.889: moh_update_rtp: callID 38 dstCallID 37
BR1-RTR#
Jun 25 19:06:06.389: moh_update_rtp: callID 38 dstCallID 37
BR1-RTR#
Jun 25 19:06:31.393: moh_update_rtp: callID 38 dstCallID 37
Jun 25 19:06:31.409: moh_delete_ccb: called dstadr 0.0.0.0, callid 0

Any ideas?
May be the QoS??

Thank you


De : Ashar Siddiqui [siddas...@gmail.com]
Date d'envoi : vendredi 25 juin 2010 18:51
À : naoufal kerboute
Cc : ccie_voice@onlinestudylist.com
Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

First of all, why are you playing? You should be labbing properly as voice 
field is not a playground..

Joke aside... ;)

What is your "‘show ccm-manager music-on-hold" ?

If no MoH streams are shown by this command then CCM has failed to provide the 
gateway with MoH

Also keep in mind Tone on hold means there is a CM misconfiguration. Silence 
means the RTP is not getting to the router.

Your case is CCM configuration issue. Check configuration again properly.

Check at Pub CCM > the MOH server - region/Device pool selected properly, reset 
it and then login to subscriber..go to the same place and reset it from there 
as well.

Also restart Media Voice app.

The output you posted means that you have proper telephony-service 
configuration (max-dn/max-ephone etc)...problem is at cucm side..

You can now continue playing..

Ash>

naoufal kerboute wrote:
Hi,

I'm playing with multicast moh over the flash of router, the configuration 
looks good and I can see in the debug the moh traffic, but on the PSTN phone I 
heard only bips.

below the output of debug ephone moh:
Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 
3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2


I've created a region who use g711 with other regions, activated the multicast 
on the source file and the moh server.


Any Ideas?



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

There you go! You now know the issue.
Share with us when you resolve it.

Ash>

naoufal kerboute wrote:

Hi Ashar,
I need to play in case to forget
the stress of the lab, it's coming soon.
I think you are right the problem
on the UCM side, I will try to restart the Media voice app and back to
you.
The output of show ccm-manager
music-on-hold

BR1-RTR#show ccm-manager
music-on-hold
Current active multicast sessions : 0
So
ucm didn't provide any multicast to the router.
Regards

De :
Ashar Siddiqui [siddas...@gmail.com]
Date d'envoi : vendredi 25 juin 2010 18:51
À : naoufal kerboute
Cc : ccie_voice@onlinestudylist.com
Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

First of all, why are you playing? You
should be labbing properly as voice field is not a playground..

Joke aside... ;)

What is your "‘show
ccm-manager music-on-hold" ?

If no MoH
streams are shown by this command then CCM has failed to provide the
gateway with MoH

Also keep in mind Tone on hold means there is a CM
misconfiguration. Silence means the RTP is not getting to the router.

Your case is CCM configuration issue. Check configuration again
properly.

Check at Pub CCM > the MOH server - region/Device pool selected
properly, reset it and then login to subscriber..go to the same place
and reset it from there as well.

Also restart Media Voice app.

The output you posted means that you have proper telephony-service
configuration (max-dn/max-ephone etc)...problem is at cucm side..

You can now continue playing..

Ash>

naoufal kerboute wrote:

Hi,
I'm playing with multicast moh
over the flash of router, the configuration looks good and I can see in
the debug the moh traffic, but on the PSTN phone I heard only bips.
below the output of debug
ephone moh:
Jun 25 18:03:04.729: MoH route
If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via
10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at
492545 read 3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via
10.10.110.2
I've created a region who use
g711 with other regions, activated the multicast on the source file and
the moh server.
Any Ideas?

___
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com

[OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

Hi Ashar,

I need to play in case to forget the stress of the lab, it's coming soon.
I think you are right the problem on the UCM side, I will try to restart the 
Media voice app and back to you.
The output of show ccm-manager music-on-hold

BR1-RTR#show ccm-manager music-on-hold
Current active multicast sessions : 0
So ucm didn't provide any multicast to the router.

Regards



De : Ashar Siddiqui [siddas...@gmail.com]
Date d'envoi : vendredi 25 juin 2010 18:51
À : naoufal kerboute
Cc : ccie_voice@onlinestudylist.com
Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

First of all, why are you playing? You should be labbing properly as voice 
field is not a playground..

Joke aside... ;)

What is your "‘show ccm-manager music-on-hold" ?

If no MoH streams are shown by this command then CCM has failed to provide the 
gateway with MoH

Also keep in mind Tone on hold means there is a CM misconfiguration. Silence 
means the RTP is not getting to the router.

Your case is CCM configuration issue. Check configuration again properly.

Check at Pub CCM > the MOH server - region/Device pool selected properly, reset 
it and then login to subscriber..go to the same place and reset it from there 
as well.

Also restart Media Voice app.

The output you posted means that you have proper telephony-service 
configuration (max-dn/max-ephone etc)...problem is at cucm side..

You can now continue playing..

Ash>

naoufal kerboute wrote:
Hi,

I'm playing with multicast moh over the flash of router, the configuration 
looks good and I can see in the debug the moh traffic, but on the PSTN phone I 
heard only bips.

below the output of debug ephone moh:
Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 
3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2


I've created a region who use g711 with other regions, activated the multicast 
on the source file and the moh server.


Any Ideas?



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] RE : Multicast Moh from Flash of BR1

Thanks Mark,
However I'm not missing this configuration, may be the file is corrupted.
Because I did it with the same way in lab1 vol1 on PL vRack, and Now I'm on 
Vol2Lab2.

De : Mark Holloway [...@markholloway.com]
Date d'envoi : vendredi 25 juin 2010 18:47
À : naoufal kerboute
Cc : ccie_voice@onlinestudylist.com
Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

Amy and Jeff helped me with this the other day.  Here is what I was missing 
(from Jeff's reply)

max-ephones 1
max-dn 1
ip source 

Also, under global config add the following command:
ccm-manager music-on-hold bind source 



On Jun 25, 2010, at 12:24 PM, naoufal kerboute wrote:

Hi,

I'm playing with multicast moh over the flash of router, the configuration 
looks good and I can see in the debug the moh traffic, but on the PSTN phone I 
heard only bips.

below the output of debug ephone moh:
Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 
3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2


I've created a region who use g711 with other regions, activated the multicast 
on the source file and the moh server.


Any Ideas?
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

First of all, why are you playing? You should be
labbing properly as voice field is not a playground..

Joke aside... ;)

What is your "‘show
ccm-manager music-on-hold" ?

If no MoH
streams are shown by this command then
CCM has failed to provide the gateway with MoH

Also keep in mind Tone on hold means there is a CM
misconfiguration. Silence means the RTP is not getting to the router.

Your case is CCM configuration issue. Check configuration again
properly.

Check at Pub CCM > the MOH server - region/Device pool selected
properly, reset it and then login to subscriber..go to the same place
and reset it from there as well.

Also restart Media Voice app.

The output you posted means that you have proper telephony-service
configuration (max-dn/max-ephone etc)...problem is at cucm side..

You can now continue playing..

Ash>

naoufal kerboute wrote:

Hi,
I'm playing with multicast moh
over the flash of router, the configuration looks good and I can see in
the debug the moh traffic, but on the PSTN phone I heard only bips.
below the output of debug ephone
moh:
Jun 25 18:03:04.729: MoH route If
Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via
10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at
492545 read 3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via
10.10.110.2
I've created a region who use
g711 with other regions, activated the multicast on the source file and
the moh server.
Any Ideas?

___
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com

Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

2010-06-25 Thread Mark Holloway

Amy and Jeff helped me with this the other day.  Here is what I was missing 
(from Jeff's reply)

max-ephones 1
max-dn 1
ip source 

Also, under global config add the following command:
ccm-manager music-on-hold bind source 



On Jun 25, 2010, at 12:24 PM, naoufal kerboute wrote:

> Hi,
>  
> I'm playing with multicast moh over the flash of router, the configuration 
> looks good and I can see in the debug the moh traffic, but on the PSTN phone 
> I heard only bips.
>  
> below the output of debug ephone moh:
> Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
> Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
> Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 
> read 3976 = 496521
> Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
> Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
> Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
>  
>  
> I've created a region who use g711 with other regions, activated the 
> multicast on the source file and the moh server.
>  
>  
> Any Ideas?
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Multicast Moh from Flash of BR1

Hi,

I'm playing with multicast moh over the flash of router, the configuration 
looks good and I can see in the debug the moh traffic, but on the PSTN phone I 
heard only bips.

below the output of debug ephone moh:
Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 
3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2


I've created a region who use g711 with other regions, activated the multicast 
on the source file and the moh server.


Any Ideas?
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CUE/CCM JTapi and MWI





few checks :

- Codec under voicemail Voip dialpeer should be g711ulaw
- add incoming-called number at CUE Voip dialpeer (your MWI range)
- Remove voice class codec 1 - if you are using it under a default
incoming voip dialpeer
- Make sure you edit MWI application at CUE with your MWI ON and MWI OFF

HTH

Ash>

Mark Holloway wrote:

  Anyone have any luck getting MWI to work when CUE is integrated with CCM?  According to Cisco's documentation you do not need MWI numbers when JTAPI is used.  Voicemail is working as expected but I cannot get MWI to light up on the phones using that are using the UCM Voicemail Profile I have created for CUE (assigned to Br2Ph1 and Br2Ph2).  

CUE successfully shows that it is registered with the CTI Route Point which explains why Voicemail works.  My Application User (JTAPI-CUE) has the CTI Route Point and additional 3 ports associated with it under Controlled Devices and I have assigned Standard CTI User under Permissions Information.  I even ticked "Accept Unsolicited Notification" but that didn't make a difference. I appreciate any assistance.. 
 

ccn subsystem jtapi
 ctiport 3111 3112 3113 
 ccm-manager address 10.10.210.11 10.10.210.10 
 ccm-manager credentials hidden "kqp8kECeSyBmpARJPQkSHY8Uxj6U33PNSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
 end subsystem

ccn subsystem sip
 gateway address "10.57.126.1"
 mwi sip unsolicited
 end subsystem

ccn trigger http urlname msgnotifytrg
 application "msgnotification"
 enabled
 maxsessions 2
 end trigger

ccn trigger http urlname mwiapp
 application "ciscomwiapplication"
 enabled
 maxsessions 1
 end trigger

ccn trigger jtapi phonenumber 3110
 application "voicemail"
 enabled
 maxsessions 3
 end trigger

ccn trigger sip phonenumber 3110
 application "voicemail"
 enabled
 maxsessions 3
 end trigger





___
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

  




___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] CUE/CCM JTapi and MWI

2010-06-25 Thread Mark Holloway

Anyone have any luck getting MWI to work when CUE is integrated with CCM?  
According to Cisco's documentation you do not need MWI numbers when JTAPI is 
used.  Voicemail is working as expected but I cannot get MWI to light up on the 
phones using that are using the UCM Voicemail Profile I have created for CUE 
(assigned to Br2Ph1 and Br2Ph2).  

CUE successfully shows that it is registered with the CTI Route Point which 
explains why Voicemail works.  My Application User (JTAPI-CUE) has the CTI 
Route Point and additional 3 ports associated with it under Controlled Devices 
and I have assigned Standard CTI User under Permissions Information.  I even 
ticked "Accept Unsolicited Notification" but that didn't make a difference. I 
appreciate any assistance.. 
 

ccn subsystem jtapi
 ctiport 3111 3112 3113 
 ccm-manager address 10.10.210.11 10.10.210.10 
 ccm-manager credentials hidden 
"kqp8kECeSyBmpARJPQkSHY8Uxj6U33PNSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
 end subsystem

ccn subsystem sip
 gateway address "10.57.126.1"
 mwi sip unsolicited
 end subsystem

ccn trigger http urlname msgnotifytrg
 application "msgnotification"
 enabled
 maxsessions 2
 end trigger

ccn trigger http urlname mwiapp
 application "ciscomwiapplication"
 enabled
 maxsessions 1
 end trigger

ccn trigger jtapi phonenumber 3110
 application "voicemail"
 enabled
 maxsessions 3
 end trigger

ccn trigger sip phonenumber 3110
 application "voicemail"
 enabled
 maxsessions 3
 end trigger





___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Voice Hunt Group to Voicemail Vol2 Lab 9

2010-06-25 Thread Graham Hopkins

Some odd behaviour here that I can't quite get my head around.
 
Config 1 - Working

voice register dn  3
 number 1003
 call-forward b2bua all 1600
 mwi
 
 voice hunt-group 1 parallel
 final 1600
 list 1001,1002
 timeout 12
 pilot 1000 

Config 2 - As per PG

voice register dn  3
 number 1003
 call-forward b2bua all 1600
 mwi
 
 voice hunt-group 1 parallel
 final 1003
 list 1001,1002
 timeout 12
 pilot 1000  
 
 
 Call from 5002 to 1000 and let go to voicemail


with config 1 UC sees the call as redirected and plays the welcome "1000 not 
available"
 
with config 2  UC see the call as coming directly from 5002 to 1600 and prompts 
for the pin for mailbox 5002 
 
 difference seems to be in the SIP messaging
 
 for config 1 I see
 
 Jun 25 13:14:44.778: //-1//SIP/Msg/ccsipDisplayMsg:
Sent: 
INVITE sip:1...@10.10.210.13:5060 SIP/2.0
Via: SIP/2.0/UDP 10.10.201.1:5060;branch=z9hG4bK10AD7
Remote-Party-ID: "HQ Ph2" 
;party=calling;screen=no;privacy=off
From: "HQ Ph2" ;tag=82568C-1CF
To: 
Date: Fri, 25 Jun 2010 13:14:44 GMT
Call-ID: 74e861cb-7f9211df-836ffb0f-d478...@10.10.201.1
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE:  1800
Cisco-Guid: 1921735851-2140279263-2154205609-2551626315
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, 
NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1277471684
Contact: 
Diversion: 
;privacy=off;reason=no-answer;counter=1;screen=no
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 188

but no such diversion for config 2 just 

Jun 25 13:15:34.588: //-1//SIP/Msg/ccsipDisplayMsg:
Sent: 
INVITE sip:1...@10.10.210.13:5060 SIP/2.0
Via: SIP/2.0/UDP 10.10.201.1:5060;branch=z9hG4bK110200E
Remote-Party-ID: "HQ Ph2" 
;party=calling;screen=no;privacy=off
From: "HQ Ph2" ;tag=831920-E7
To: 
Date: Fri, 25 Jun 2010 13:15:34 GMT
Call-ID: 929827af-7f9211df-8380fb0f-d478...@10.10.201.1
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE:  1800
Cisco-Guid: 2459285263-2140279263-2206071567-222790417
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, 
NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1277471734
Contact: 
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 187

Any thoughts?

Graham Hopkins



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] IP Blue VPN problem

2010-06-25 Thread Wilson Bolanos

Got it fixed.  Must have been the pod I was on that day with, because I was 
able to connect just fine with I Blue phone multilab a couple of days later.
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Wilson Bolanos
Sent: Tuesday, June 22, 2010 4:10 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] IP Blue VPN problem

When I VPN from home to Proctorlabs voice racks, I can't connect IP Blue or 
CIPC via my computer.  I know it is not a configuration problem with  
proctorlabs, because if I connect to the Contact Center Express 7 server for 
proctorlabs I can set their IP Blue phone up (PSTN and Call Manager).  I have 
tried MS Loopback adapter on my laptop as well as the VPN adapter to register 
the IP Blue phone.  I have tried different versions of IP blue.  I have 
disabled my firewall.  I am starting to think I am nuts. Could it be my 
Internet Service Provider?  I can enter the primary TFTP on the IP Blue, but it 
will not let me add the Priamry or Secondary CAllManager IP (box is greyed 
out).  Currently, I am using the IP BLUE VTGO-PC Multilab version 2.11.1.308 
version.

Wilson

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] CUE test or verify command

2010-06-25 Thread Afzal Bhutta

Hello Dear Folks,
I have one question regarding CUE site.Which is alone not dependent on HQ or
CUCM.My question is how I can verify and test that my CUE voice mail is
working correctly with correct codec.
Please any body can put some some shade on it.
Thanks for your help.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RE : Mobile voice access a sking userid rather then pin

2010-06-25 Thread kapil atrish

There is a CCM Service parameter to check calling no for MVA. You may set it to 
partial match to avoid issues with not having exact digit by digit match. See 
if it helps.
 


--- On Thu, 6/24/10, naoufal.kerboute  wrote:


From: naoufal.kerboute 
Subject: [OSL | CCIE_Voice] RE : Mobile voice access asking userid rather then 
pin
To: laurent.bourm...@orange-ftgroup.com, "." 
Date: Thursday, June 24, 2010, 10:04 PM



check the caller id coming from pstn to UCM and youe remote destination number.
May be you need to apply any transformation in the calling number to match the 
remote destination number


 Message d'origine
De: ccie_voice-boun...@onlinestudylist.com de la part de 
laurent.bourm...@orange-ftgroup.com
Date: jeu. 24/06/2010 18:30
À: .
Objet : [OSL | CCIE_Voice] Mobile voice access asking userid rather then pin

Hi,

It seems that I have an issue getting the MVA oerational.

Actually I use a H323 gatway connected to the CUCM, so when I call from my 
remote destination I have the prompt saying " Please enter your userid ..." 
rather than getting the pin prompt.

I did a trace on the CUCM then it seems that my remote destination is properly 
recognized :

2010-06-24 18:21:01,269 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]:: IVR get Filename
2010-06-24 18:21:01,270 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile()
2010-06-24 18:21:01,271 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and  
locale = en_US
2010-06-24 18:21:01,271 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::execute(): action start
2010-06-24 18:21:01,272 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and  
locale = en_US
2010-06-24 18:21:01,273 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US
2010-06-24 18:21:01,274 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::-new-code-got-callerid-as-remotedest: 
+447976852817
2010-06-24 18:21:01,275 DEBUG [http-8080-Processor24] 
controller.IVRGetAudioFile - [CCM_IVR]:: getting the file now
2010-06-24 18:21:01,275 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US   
sessionid:1472FAADA95E59CFE334AD38AFA395FF
2010-06-24 18:21:01,277 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::remotedest: +447976852817   
sessionid:1472FAADA95E59CFE334AD38AFA395FF
2010-06-24 18:21:01,278 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Host: 10.100.210.11:8080
2010-06-24 18:21:01,279 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Content-Type 
application/x-www-form-urlencoded
2010-06-24 18:21:01,279 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Connection: close
2010-06-24 18:21:01,280 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::Accept: text/vxml, text/x-vxml, 
application/vxml, application/x-vxml, application/voicexml, 
application/x-voicexml, text/plain, text/html, audio/basic, audio/wav, 
multipart/form-data, application/octet-stream
2010-06-24 18:21:01,280 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::User-Agent: Cisco-IOS-C3845/12.4
2010-06-24 18:21:01,281 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getUserIdFromRemoteDestination- DB Query -->   remoteDest  = 
+447976852817
2010-06-24 18:21:01,285 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   sql:  = select paramValue 
from processconfig where paramName ='RemDestCallerIDMatchType' and tkService 
='0'
2010-06-24 18:21:01,325 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   RemDestCallerIDMatchType:  
= 1
2010-06-24 18:21:01,327 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getUserIdFromRemoteDestination()  -- partial match enabled
2010-06-24 18:21:01,328 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]<--- getNumDigitsPartialMatch --DB Query -->   sql:  = select 
paramValue from processconfig where paramName ='RemDestCallerIDMatchDigits' and 
tkService ='0'
2010-06-24 18:21:01,329 DEBUG [http-8080-Processor23] util.IVRDBInterface - 
[CCM_IVR]IVRDBInterface.getUserIdFromRemoteDestination() 
-->java.lang.NullPointerException
2010-06-24 18:21:01,329 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::ccmusername: null
2010-06-24 18:21:01,330 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]::ccmusername:is Null ?? null
2010-06-24 18:21:01,331 DEBUG [http-8080-Processor23] 
controller.IVRCalleridLookup - [CCM_IVR]IVRCallerIdLookup::execute(): 
ccmusername is Null and action forwarding IVRUserid 
2010-06-24 18:21:04,631 DEBUG [http-8080-Processor25] 
controller.IVRGetAudioFile -

Re: [OSL | CCIE_Voice] Loading please wait - CUCM GUI error

I saw this once in a while in the CUCM 6, I suspected that it was b/c Tomcat
lost connection with CUCM.  Opening a new IE/Firefox window and re-login,
then it would work out OK for me.

Please try that and see if it works out for you.



Bo



On Fri, Jun 25, 2010 at 1:42 AM, Aman Chugh  wrote:

> Which browser are you using. I have seen this before.
>
> It would not be a bad idea to clean up temp files of your browser like
> cookies and other browsing related data.
>
> HTH.
> Aman
>
> On Fri, Jun 25, 2010 at 1:14 PM, Ashar Siddiqui wrote:
>
>>  Hello all,
>>
>>
>>
>> I am having an issue while accessing GUI page of CUCM for one of the
>> customer.
>>
>> CUCM version is 6.1.1.3101-1.
>>
>>
>>
>> When I enter username and password, the call manager accepts the
>> credentials and then sits in “Loading please wait” state for indefinite
>> time.
>>
>> Searched everywhere but couldn’t find any solution for it.
>>
>> Rebooted the box but no joy. All services are running. Restarted the
>> Tomcat service as well.
>>
>> It’s just one call manager in the cluster.
>>
>>
>>
>>
>>
>> Any clue?
>>
>>
>>
>> Ash>
>>
>>
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Loading please wait - CUCM GUI error

2010-06-25 Thread Aman Chugh

Which browser are you using. I have seen this before.

It would not be a bad idea to clean up temp files of your browser like
cookies and other browsing related data.

HTH.
Aman

On Fri, Jun 25, 2010 at 1:14 PM, Ashar Siddiqui  wrote:

>  Hello all,
>
>
>
> I am having an issue while accessing GUI page of CUCM for one of the
> customer.
>
> CUCM version is 6.1.1.3101-1.
>
>
>
> When I enter username and password, the call manager accepts the
> credentials and then sits in “Loading please wait” state for indefinite
> time.
>
> Searched everywhere but couldn’t find any solution for it.
>
> Rebooted the box but no joy. All services are running. Restarted the Tomcat
> service as well.
>
> It’s just one call manager in the cluster.
>
>
>
>
>
> Any clue?
>
>
>
> Ash>
>
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Loading please wait - CUCM GUI error