Re: [OSL | CCIE_Voice] #29164
Congratulations!!! Thanks for the help! randall From: Miron Kobelski findko...@gmail.com To: ccie_voice@onlinestudylist.com Sent: Tuesday, June 7, 2011 10:06 PM Subject: [OSL | CCIE_Voice] #29164 I received my number yesterday :) This list has been very helpful during my preparations, so thank you all and I wish you good luck with your exams! best regards kobel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] #29164
Congratulations! On 8 June 2011 08:06, Miron Kobelski findko...@gmail.com wrote: I received my number yesterday :) This list has been very helpful during my preparations, so thank you all and I wish you good luck with your exams! best regards kobel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] I just got my Fail result
Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME background with only 2 files
Example of List.xml file is in the Phone Admin Guide in phone customisation section. The guide will be available in online documentation. --- On Wed, 8/6/11, ShinGei Yong shingei.y...@gmail.com wrote: From: ShinGei Yong shingei.y...@gmail.com Subject: Re: [OSL | CCIE_Voice] CME background with only 2 files To: Chris Green voice5...@yahoo.com Cc: ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 4:18 You better to be familiar on how to write the List.xml script without referring to any doc during ur attempt. Not that too difficult, get yourself typing the below stuff 10times per day till the exam. CiscoIPPhoneImageList ImageItem Image=TFTP:Desktops/320x212x16/TN-Image.png URL=TFTP:Desktops/320x212x16/Image.png/ /CiscoIPPhoneImageList Shingei. On Wed, Jun 8, 2011 at 10:22 AM, Chris Green voice5...@yahoo.com wrote: Hi All, For CME Background we need 3 files, 2 images and one List XML file. Is there any way to complete this task with only with 2 images and not List XML file? Basically what would be the solution if you provided with only 2 images and NOT List XML file. Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX grading
I wonder how we can get 38% if it is only 1 task. It can be 0 or 100. There is no partial mark - we were told! --- On Wed, 8/6/11, Michael Luo hout...@gmail.com wrote: From: Michael Luo hout...@gmail.com Subject: [OSL | CCIE_Voice] UCCX grading To: ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 5:40 I got 38% on UCCX, which I didn't expect. I tested made test calls to verify the workflow. What could be the possible traps / tricks that cause loss of points? Thanks! Michael -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] #29164
Congratulations Kobel! De: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de Miron Kobelski Enviado el: miércoles, 08 de junio de 2011 7:07 Para: ccie_voice@onlinestudylist.com Asunto: [OSL | CCIE_Voice] #29164 I received my number yesterday :) This list has been very helpful during my preparations, so thank you all and I wish you good luck with your exams! best regards kobel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] #29164
Congradulations Miron. Sent from my iPad On 8 Jun 2011, at 06:06, Miron Kobelski findko...@gmail.com wrote: I received my number yesterday :) This list has been very helpful during my preparations, so thank you all and I wish you good luck with your exams! best regards kobel ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Ringlist.xml and List.xml
Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] digit manipulate on VOICE-PORT or on POT
Hi All, What is the difference manipulating the digit on VOICE-PORT or POT as follows? Which one expected for the exam and why? - voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 voice-port 0/1/0:23 translation-profile incoming pstn-in dial-peer voice 1 pots incoming called-number . direct-inward-dial --- voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 dial-peer voice 1 pots translation-profile incoming pstn-in incoming called-number . direct-inward-dial port 0/1/0:23 --- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] #29164
Congrats Best Regards , Moataz Mamdouh Tolba CCIE # 26129 (Voice) -Original Message- From: Miron Kobelski findko...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Wed, 8 Jun 2011 07:06:53 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] #29164 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
That is very interesting. Are there any implicit requirements for call routing? For instance, do we need to set up ISDN Numbering Plan if there are no specific requirements or leave to default settings? Do we need to specifically allow calling name on RP, or leave to default, which is allowed anyway? Do we lose points for changing defaults or Do we lose points for not changing defaults? To be or not to be? This question was raised long time before cisco. --- On Wed, 8/6/11, Chris Green voice5...@yahoo.com wrote: From: Chris Green voice5...@yahoo.com Subject: [OSL | CCIE_Voice] I just got my Fail result To: ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 8:04 Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
I know what you mean. I thought I nailed QOS 100% and got a zero. On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.com wrote: Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml
Also, you have to reset TFTP service if it is running. It serves the old file until you do. Be prepared to do this task on the SUB as well. I wouldn't recommend changing the tftp, because then you have to change your DHCP option and reset the phones, then change back You could burn some time there. On Wed, Jun 8, 2011 at 4:16 AM, Adil Shaikh adil.sha...@gmail.com wrote: Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] #29164
Congrats on your success! Although I am not voice CCIE (yet!) I imagine that it was a tough test. Thanks, Michael Miller CCIE# 28901 (RS) On Wed, Jun 8, 2011 at 11:36 AM, Moataz Mamdouh moataz_m...@yahoo.comwrote: Congrats Best Regards , Moataz Mamdouh Tolba CCIE # 26129 (Voice) -Original Message- From: Miron Kobelski findko...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Wed, 8 Jun 2011 07:06:53 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] #29164 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unity connection : USER ID should not be asked
Hey Guys , thanks for reply. did it and working fine now :) thx, Rahul On Wed, Jun 8, 2011 at 1:49 AM, Nirvair Sahota nirvair.sah...@sbcglobal.net wrote: It is the setting in Unity given below: System Settings -- Advanced -- Conversations (Request Entry of User ID after Failed Password Entry from Known Extension) --- On Tue, 6/7/11, Julien Krieger krieger.jul...@gmail.com wrote: From: Julien Krieger krieger.jul...@gmail.com Subject: Re: [OSL | CCIE_Voice] Unity connection : USER ID should not be asked To: Rahul Kapor rahul.kapo...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Tuesday, June 7, 2011, 12:12 PM Hi Rahul, There is an option to uncheck in advanced config menu. Recently, someone, posted on thé same subject... Julien Le 7 juin 2011 à 20:05, Rahul Kapor rahul.kapo...@gmail.com a écrit : Hi All, trying to achieve following things when user is hitting voice mail and entering wrong password , user is prompt to enter USER ID but user should be prompted for PIN again not for USER ID ! how to achieve this . thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] No service configured on phone display
Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Home Lab PSTN
Hi Friends: Building my home lab was exciting. Getting the basic infrastructure configured correctly is fun and also as times tedious. I have me 2811 router configured as PSTN. -- I configured the dhcp and used the loopback 10.10.110.3 as the default router and as option 150. The ephone-dn and ephone 1 has been configured. But, I don't seem to get the dhcp and ip add on the phone. -- My pstn phone get its power from a 3550 switch. Do I need to configure a voice vlan for it? -- The IPExpert pstn config doesn't have any dhcp configured. How does the router get the dhcp address? Thank you for any feedback or suggestions Voiper ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] digit manipulate on VOICE-PORT or on POT
Manipulating on voice-affects all incoming calls on that port meanwhile doing on pots dial-peer only modify calls that match this peer. If not asked otherwise better to modify incoming pstn calls on voice-port. Peter - Original Message - From: Chris Green voice5...@yahoo.com Date: Wednesday, June 8, 2011 12:46 pm Subject: [OSL | CCIE_Voice] digit manipulate on VOICE-PORT or on POT To: ccie_voice@onlinestudylist.com Hi All, What is the difference manipulating the digit on VOICE-PORT or POT as follows? Which one expected for the exam and why? - voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 voice-port 0/1/0:23 translation-profile incoming pstn-in dial-peer voice 1 pots incoming called-number . direct-inward-dial --- voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 dial-peer voice 1 pots translation-profile incoming pstn-in incoming called-number . direct-inward-dial port 0/1/0:23 --- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] No service configured on phone display
That is so complex specially if you have many phones, Consider you are working in a company with 2000 IP phones assigned to employees then every day you have request to run NO Service Configured for different employee who is getting time off and they need you block their directory for period of tie for security reason. Answer would be changing the External URL services... ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] digit manipulate on VOICE-PORT or on POT
as adam wrote, do on voice port unless otherwise stated. in real world, dial-peer translation-profile are used when PSTN connection is through BRI and FXO ports. -adil On Wed, Jun 8, 2011 at 7:52 PM, Chris Green voice5...@yahoo.com wrote: Hi All, What is the difference manipulating the digit on VOICE-PORT or POT as follows? Which one expected for the exam and why? - voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 voice-port 0/1/0:23 translation-profile incoming pstn-in dial-peer voice 1 pots incoming called-number . direct-inward-dial --- voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 dial-peer voice 1 pots translation-profile incoming pstn-in incoming called-number . direct-inward-dial port 0/1/0:23 --- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
Hi Rahul, the other approach is to go to the device you want this to be achived. set 'Services Provisioning[image: Required Field]' to external URL and in 'External Data Locations Information (Leave blank to use default)' section set Directory to anything you like for example type word 'nowhere' Reset the phone and you are done. Is this CCIE exam accepted answer? I do not know. -adil On Wed, Jun 8, 2011 at 9:56 PM, Rahul Kapor rahul.kapo...@gmail.com wrote: Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
It worked !!! :) awesome Vinay On Wed, Jun 8, 2011 at 6:18 PM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote: On the Phone, Make *Service Provisioning* as *Externa*l, from the Enterprise Parameters remove the Directory URL. Warm Regards, Vinay Kumar From: Rahul Kapor rahul.kapo...@gmail.com To: ccie_voice@onlinestudylist.com Date: 06/08/2011 06:15 PM Subject: [OSL | CCIE_Voice] No service configured on phone display -- Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
I'm with you man. I can do it, but that sure eats up a lot of time. On Wed, Jun 8, 2011 at 7:56 AM, Rahul Kapor rahul.kapo...@gmail.com wrote: Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX grading
The one I got actually has three tasks - two for scripts and one for agent clients. But I tested the call flow by calling the route points and watch the agents behavior. It was all functioning as required. So I don't understand why lost points. On Wed, Jun 8, 2011 at 12:28 AM, Victor Malyuga victor_maly...@yahoo.comwrote: I wonder how we can get 38% if it is only 1 task. It can be 0 or 100. There is no partial mark - we were told! --- On *Wed, 8/6/11, Michael Luo hout...@gmail.com* wrote: From: Michael Luo hout...@gmail.com Subject: [OSL | CCIE_Voice] UCCX grading To: ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 5:40 I got 38% on UCCX, which I didn't expect. I tested made test calls to verify the workflow. What could be the possible traps / tricks that cause loss of points? Thanks! Michael -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] isdn setup message
Hi, For H323.gateway, how do we setup the called party number type in isdn setup message, do we do it from the call Call Manager side or using the translation rule on the gateway? Warm Regards, Vinay Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml
I don't understand why step 5. Dont you have the phones pointing to that server already? If you talk about CME phones, then the ringlist must be uploaded to CME, not CUCM. On Wed, Jun 8, 2011 at 2:16 AM, Adil Shaikh adil.sha...@gmail.com wrote: Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Home Lab PSTN
GL with your study! On Wed, Jun 8, 2011 at 6:01 AM, Voiper datapack...@gmail.com wrote: Hi Friends: Building my home lab was exciting. Getting the basic infrastructure configured correctly is fun and also as times tedious. I have me 2811 router configured as PSTN. -- I configured the dhcp and used the loopback 10.10.110.3 as the default router and as option 150. The ephone-dn and ephone 1 has been configured. But, I don't seem to get the dhcp and ip add on the phone. -- My pstn phone get its power from a 3550 switch. Do I need to configure a voice vlan for it? -- The IPExpert pstn config doesn't have any dhcp configured. How does the router get the dhcp address? Thank you for any feedback or suggestions Voiper ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] digit manipulate on VOICE-PORT or on POT
in real world, dial-peer translation-profile are used when PSTN connection is through BRI and FXO ports. Not sure where are you getting this?? What is the difference with PRI or lab?? ? On Wed, Jun 8, 2011 at 6:25 AM, Adil Shaikh adil.sha...@gmail.com wrote: as adam wrote, do on voice port unless otherwise stated. in real world, dial-peer translation-profile are used when PSTN connection is through BRI and FXO ports. -adil On Wed, Jun 8, 2011 at 7:52 PM, Chris Green voice5...@yahoo.com wrote: Hi All, What is the difference manipulating the digit on VOICE-PORT or POT as follows? Which one expected for the exam and why? - voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 voice-port 0/1/0:23 translation-profile incoming pstn-in dial-peer voice 1 pots incoming called-number . direct-inward-dial --- voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 dial-peer voice 1 pots translation-profile incoming pstn-in incoming called-number . direct-inward-dial port 0/1/0:23 --- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
Worked hear as well! On Wed, Jun 8, 2011 at 8:57 AM, Rahul Kapor rahul.kapo...@gmail.com wrote: It worked !!! :) awesome Vinay On Wed, Jun 8, 2011 at 6:18 PM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote: On the Phone, Make *Service Provisioning* as *Externa*l, from the Enterprise Parameters remove the Directory URL. Warm Regards, Vinay Kumar From: Rahul Kapor rahul.kapo...@gmail.com To: ccie_voice@onlinestudylist.com Date: 06/08/2011 06:15 PM Subject: [OSL | CCIE_Voice] No service configured on phone display -- Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Home Lab PSTN
DHCP is configure on Workbooks task. 10.10.110.3 as Default route and TFTP? for all or for the branch? Grts On Wed, Jun 8, 2011 at 8:01 AM, Voiper datapack...@gmail.com wrote: Hi Friends: Building my home lab was exciting. Getting the basic infrastructure configured correctly is fun and also as times tedious. I have me 2811 router configured as PSTN. -- I configured the dhcp and used the loopback 10.10.110.3 as the default router and as option 150. The ephone-dn and ephone 1 has been configured. But, I don't seem to get the dhcp and ip add on the phone. -- My pstn phone get its power from a 3550 switch. Do I need to configure a voice vlan for it? -- The IPExpert pstn config doesn't have any dhcp configured. How does the router get the dhcp address? Thank you for any feedback or suggestions Voiper ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME background with only 2 files
Yes, just refer to phone admin guide. Memorising that is a bit too hardcore ! It's hardly useful in real life situation. Out of 10 deployment, i only use it maybe once. On Wed, Jun 8, 2011 at 3:07 PM, Victor Malyuga victor_maly...@yahoo.comwrote: Example of List.xml file is in the Phone Admin Guide in phone customisation section. The guide will be available in online documentation. --- On *Wed, 8/6/11, ShinGei Yong shingei.y...@gmail.com* wrote: From: ShinGei Yong shingei.y...@gmail.com Subject: Re: [OSL | CCIE_Voice] CME background with only 2 files To: Chris Green voice5...@yahoo.com Cc: ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 4:18 You better to be familiar on how to write the List.xml script without referring to any doc during ur attempt. Not that too difficult, get yourself typing the below stuff 10times per day till the exam. CiscoIPPhoneImageList ImageItem Image=TFTP:Desktops/320x212x16/TN-Image.png URL=TFTP:Desktops/320x212x16/Image.png/ /CiscoIPPhoneImageList Shingei. On Wed, Jun 8, 2011 at 10:22 AM, Chris Green voice5...@yahoo.comhttp://uk.mc290.mail.yahoo.com/mc/compose?to=voice5...@yahoo.com wrote: Hi All, For CME Background we need 3 files, 2 images and one List XML file. Is there any way to complete this task with only with 2 images and not List XML file? Basically what would be the solution if you provided with only 2 images and NOT List XML file. Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
I also got my report. That's very confusing to me as well. For example, I'm pretty sure I made a mistake on QoS. But I got 100%. Then I'm pretty sure I've don't everything right in UCCX but got 38%. On Wed, Jun 8, 2011 at 4:02 AM, adam compton com...@gmail.com wrote: I know what you mean. I thought I nailed QOS 100% and got a zero. On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.com wrote: Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
I meant - I've done everything right in UCCX. On Wed, Jun 8, 2011 at 7:37 AM, Michael Luo hout...@gmail.com wrote: I also got my report. That's very confusing to me as well. For example, I'm pretty sure I made a mistake on QoS. But I got 100%. Then I'm pretty sure I've don't everything right in UCCX but got 38%. On Wed, Jun 8, 2011 at 4:02 AM, adam compton com...@gmail.com wrote: I know what you mean. I thought I nailed QOS 100% and got a zero. On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.com wrote: Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn setup message
Do it via translation rule is the best as it give you fexibility and ability to add + sign in front for calling number which is somehow loss when using h323. =( On Wed, Jun 8, 2011 at 9:19 PM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote: Hi, For H323.gateway, how do we setup the called party number type in isdn setup message, do we do it from the call Call Manager side or using the translation rule on the gateway? Warm Regards, Vinay Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] isdn setup message
best practice is on the gateway because most likely you will need it it in SRST mode as well. voice translation-rule 10 rule 1 // // type any local voice translation-profile local translate called 10 dial-peer voice 97 pots destination-pattern 9[2-9].. translation-profile outgoing local From: Vinay Kumar6 vinayjaisw...@in.ibm.com To: ccie_voice@onlinestudylist.com Sent: Wed, June 8, 2011 9:19:06 AM Subject: [OSL | CCIE_Voice] isdn setup message Hi, For H323.gateway, how do we setup the called party number type in isdn setup message, do we do it from the call Call Manager side or using the translation rule on the gateway? Warm Regards, Vinay Kumar___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] I just failed the LAB 5
Hi Adam, Best of luck, you gonna make it this time, I got my fail result today but I have to find out my mistake and attend again. I am sure success marry you this time.___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] digit manipulate on VOICE-PORT or on POT
Incoming i always do it on the voice-port level Outgoing i always do it on the dial-peer level due to ISDN type and plan requirement. On Wed, Jun 8, 2011 at 10:14 PM, Randall Saborio ill2...@gmail.com wrote: in real world, dial-peer translation-profile are used when PSTN connection is through BRI and FXO ports. Not sure where are you getting this?? What is the difference with PRI or lab?? ? On Wed, Jun 8, 2011 at 6:25 AM, Adil Shaikh adil.sha...@gmail.com wrote: as adam wrote, do on voice port unless otherwise stated. in real world, dial-peer translation-profile are used when PSTN connection is through BRI and FXO ports. -adil On Wed, Jun 8, 2011 at 7:52 PM, Chris Green voice5...@yahoo.com wrote: Hi All, What is the difference manipulating the digit on VOICE-PORT or POT as follows? Which one expected for the exam and why? - voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 voice-port 0/1/0:23 translation-profile incoming pstn-in dial-peer voice 1 pots incoming called-number . direct-inward-dial --- voice translation-rule 1 rule 1 /^.*\(5...\)/ /\1/ voice translation-profile pstn-in translate called 1 dial-peer voice 1 pots translation-profile incoming pstn-in incoming called-number . direct-inward-dial port 0/1/0:23 --- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
However, with that.. you can't press the voicemail button anymore ! On Wed, Jun 8, 2011 at 10:16 PM, adam compton com...@gmail.com wrote: Worked hear as well! On Wed, Jun 8, 2011 at 8:57 AM, Rahul Kapor rahul.kapo...@gmail.comwrote: It worked !!! :) awesome Vinay On Wed, Jun 8, 2011 at 6:18 PM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote: On the Phone, Make *Service Provisioning* as *Externa*l, from the Enterprise Parameters remove the Directory URL. Warm Regards, Vinay Kumar From: Rahul Kapor rahul.kapo...@gmail.com To: ccie_voice@onlinestudylist.com Date: 06/08/2011 06:15 PM Subject: [OSL | CCIE_Voice] No service configured on phone display -- Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
Maybe you missed out some requirement? Such as they want you to use system recording but you recorded your own? They want you to set agent to not ready after the call ended? Set the agent to work state after the call ended? Queue the call to special CSQ, etc etc. UCCX is a nightmare.! On Wed, Jun 8, 2011 at 10:37 PM, Michael Luo hout...@gmail.com wrote: I meant - I've done everything right in UCCX. On Wed, Jun 8, 2011 at 7:37 AM, Michael Luo hout...@gmail.com wrote: I also got my report. That's very confusing to me as well. For example, I'm pretty sure I made a mistake on QoS. But I got 100%. Then I'm pretty sure I've don't everything right in UCCX but got 38%. On Wed, Jun 8, 2011 at 4:02 AM, adam compton com...@gmail.com wrote: I know what you mean. I thought I nailed QOS 100% and got a zero. On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.com wrote: Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Home Lab PSTN
Thanks Randall, Abel and Martin for the quick response. Voiper On Wed, Jun 8, 2011 at 11:42 AM, Martin, Christopher L clmar...@bryantx.gov wrote: Technically you can configure a static IP/TFTP on a phone and not use DHCP, which may be what IPExpert does, or they have another device providing DHCP. If you connect a 3550 to your 2811 you need to setup your vlans/trunks correctly so it flows from your phone to the 3550 and to the 2811. If you have access to IPExpert config’s you can look at HQ-RTR/HQ-3750 setup and do something similar. ** ** Also keep in mind that IPExpert tends to use 10.10.110.3 as the BR2 loopback address. ** ** HTH ** ** CM ** ** *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Voiper *Sent:* Wednesday, June 08, 2011 7:02 AM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] Home Lab PSTN ** ** Hi Friends: Building my home lab was exciting. Getting the basic infrastructure configured correctly is fun and also as times tedious. I have me 2811 router configured as PSTN. -- I configured the dhcp and used the loopback 10.10.110.3 as the default router and as option 150. The ephone-dn and ephone 1 has been configured. But, I don't seem to get the dhcp and ip add on the phone. -- My pstn phone get its power from a 3550 switch. Do I need to configure a voice vlan for it? -- The IPExpert pstn config doesn't have any dhcp configured. How does the router get the dhcp address? Thank you for any feedback or suggestions Voiper ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
Customized prompt was required. Thus I recorded my prompt. Set agent to not ready as required. For CSQ, there's no specific requirement. Thus I created my own CSQ. I'm pretty familiar with UCCX. I can do whatever they ask me to do. I just need to understand their grading philosophy so I don't miss the trivial things and lose the whole portion. Michael On Wed, Jun 8, 2011 at 8:54 AM, Ki Wi kiwi.vo...@gmail.com wrote: Maybe you missed out some requirement? Such as they want you to use system recording but you recorded your own? They want you to set agent to not ready after the call ended? Set the agent to work state after the call ended? Queue the call to special CSQ, etc etc. UCCX is a nightmare.! On Wed, Jun 8, 2011 at 10:37 PM, Michael Luo hout...@gmail.com wrote: I meant - I've done everything right in UCCX. On Wed, Jun 8, 2011 at 7:37 AM, Michael Luo hout...@gmail.com wrote: I also got my report. That's very confusing to me as well. For example, I'm pretty sure I made a mistake on QoS. But I got 100%. Then I'm pretty sure I've don't everything right in UCCX but got 38%. On Wed, Jun 8, 2011 at 4:02 AM, adam compton com...@gmail.com wrote: I know what you mean. I thought I nailed QOS 100% and got a zero. On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.comwrote: Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
just now tested and voice button does not work ! now what ? any further suggestion ... On Wed, Jun 8, 2011 at 9:09 PM, Ki Wi kiwi.vo...@gmail.com wrote: However, with that.. you can't press the voicemail button anymore ! On Wed, Jun 8, 2011 at 10:16 PM, adam compton com...@gmail.com wrote: Worked hear as well! On Wed, Jun 8, 2011 at 8:57 AM, Rahul Kapor rahul.kapo...@gmail.comwrote: It worked !!! :) awesome Vinay On Wed, Jun 8, 2011 at 6:18 PM, Vinay Kumar6 vinayjaisw...@in.ibm.comwrote: On the Phone, Make *Service Provisioning* as *Externa*l, from the Enterprise Parameters remove the Directory URL. Warm Regards, Vinay Kumar From: Rahul Kapor rahul.kapo...@gmail.com To: ccie_voice@onlinestudylist.com Date: 06/08/2011 06:15 PM Subject: [OSL | CCIE_Voice] No service configured on phone display -- Hi All, want to achieve following scenario : when directory button is pressed for message No service configured should be seen on phone display. Above should be only for one phone !! I am following steps but its time consuming steps Go to Phone service. delete the all the default service except voicmail and Intercom. Before copying ,make sure u copy all the phone service name and respective service in text pad. Again create all the phone service which were deleted. Now all phone should subscibe to all service manually except one phone. Above is very time consuming :( is they any efficient/shorter steps ? thx, Rahul ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
You have delete the enterprise services and then re add them as regular services. Then add them all as new service to the phones that need it using BAT. THAT'S IT. -Original Message- From: Ki Wi kiwi.vo...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Wed, 8 Jun 2011 23:39:53 To: adam comptoncom...@gmail.com Cc: ccie_voice@onlinestudylist.com; Rahul Kaporrahul.kapo...@gmail.com; ccie_voice-boun...@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No service configured on phone display ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
You can add services with BAT? On Wed, Jun 8, 2011 at 1:20 PM, cciefo...@hotmail.com wrote: You have delete the enterprise services and then re add them as regular services. Then add them all as new service to the phones that need it using BAT. THAT'S IT. -Original Message- From: Ki Wi kiwi.vo...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Wed, 8 Jun 2011 23:39:53 To: adam comptoncom...@gmail.com Cc: ccie_voice@onlinestudylist.com; Rahul Kaporrahul.kapo...@gmail.com; ccie_voice-boun...@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No service configured on phone display ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just got my Fail result
Your score reports are protected by the NDA agreement. Obviously so are the test questions. Stop breaking NDA. - Reply message - From: Michael Luo hout...@gmail.com Date: Wed, Jun 8, 2011 12:11 pm Subject: [OSL | CCIE_Voice] I just got my Fail result To: Ki Wi kiwi.vo...@gmail.com Cc: ccie_voice@onlinestudylist.com, Chris Green voice5...@yahoo.com Customized prompt was required. Thus I recorded my prompt. Set agent to not ready as required. For CSQ, there's no specific requirement. Thus I created my own CSQ. I'm pretty familiar with UCCX. I can do whatever they ask me to do. I just need to understand their grading philosophy so I don't miss the trivial things and lose the whole portion. Michael On Wed, Jun 8, 2011 at 8:54 AM, Ki Wi kiwi.vo...@gmail.com wrote: Maybe you missed out some requirement? Such as they want you to use system recording but you recorded your own? They want you to set agent to not ready after the call ended? Set the agent to work state after the call ended? Queue the call to special CSQ, etc etc. UCCX is a nightmare.! On Wed, Jun 8, 2011 at 10:37 PM, Michael Luo hout...@gmail.com wrote: I meant - I've done everything right in UCCX. On Wed, Jun 8, 2011 at 7:37 AM, Michael Luo hout...@gmail.com wrote: I also got my report. That's very confusing to me as well. For example, I'm pretty sure I made a mistake on QoS. But I got 100%. Then I'm pretty sure I've don't everything right in UCCX but got 38%. On Wed, Jun 8, 2011 at 4:02 AM, adam compton com...@gmail.com wrote: I know what you mean. I thought I nailed QOS 100% and got a zero. On Wed, Jun 8, 2011 at 3:04 AM, Chris Green voice5...@yahoo.comwrote: Hi All, I just got my fail result, and what it shocked me is the Call Routing mark for 40% while I am sure I done what was asked for and I tested as well. I also got 100% in 4 different section but what it killed me is Call Routing which I was quite confident about that section :( Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CCIE Voice one-on-one training / coaching
If anyone is interested in one-on-one private coaching/tutoring for CCIE voice, send me a private message. Must have sat at least once, attended IPE boot-camp or 1-week lab experience or be fairly far along in preparation. Food/lodging, pickup from airport (COS) included. Full lab equipment available onsite. Location is Colorado Springs, Colorado 80901 US US$1k per day ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
All; All you need to do is go to Phone service Open Missed Calls, Received Calls, etc,(directory related) and copy all the URLs to notepad. Then delete those. Then re-add them (or only the ones needed) but don't check the Enterprise Subscription box. Then subscribe the individual phones to these services. Don't delete the voicemail one. :) I've already tested this. Sam. On Wed, Jun 8, 2011 at 1:46 PM, adam compton com...@gmail.com wrote: You can add services with BAT? On Wed, Jun 8, 2011 at 1:20 PM, cciefo...@hotmail.com wrote: You have delete the enterprise services and then re add them as regular services. Then add them all as new service to the phones that need it using BAT. THAT'S IT. -Original Message- From: Ki Wi kiwi.vo...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Wed, 8 Jun 2011 23:39:53 To: adam comptoncom...@gmail.com Cc: ccie_voice@onlinestudylist.com; Rahul Kaporrahul.kapo...@gmail.com; ccie_voice-boun...@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No service configured on phone display ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME background with only 2 files
Hi, Another easier way is to go to the Cisco website and browse to: UCIP TelephonyCall ControlCUCMEConfig Examples Here you'll find a sample config for changing the background of a 7970 for a CME deployment, the sizing is same for a 7965 (320x212, i think). And the important thing, the List.xml format is the same for CUCM. Now you can focus on practicing something more complex 10 times a day :) E. Sent from my iPhone On Jun 8, 2011, at 10:07 AM, Victor Malyuga victor_maly...@yahoo.com wrote: Example of List.xml file is in the Phone Admin Guide in phone customisation section. The guide will be available in online documentation. --- On Wed, 8/6/11, ShinGei Yong shingei.y...@gmail.com wrote: From: ShinGei Yong shingei.y...@gmail.com Subject: Re: [OSL | CCIE_Voice] CME background with only 2 files To: Chris Green voice5...@yahoo.com Cc: ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 4:18 You better to be familiar on how to write the List.xml script without referring to any doc during ur attempt. Not that too difficult, get yourself typing the below stuff 10times per day till the exam. CiscoIPPhoneImageList ImageItem Image=TFTP:Desktops/320x212x16/TN-Image.png URL=TFTP:Desktops/320x212x16/Image.png/ /CiscoIPPhoneImageList Shingei. On Wed, Jun 8, 2011 at 10:22 AM, Chris Green voice5...@yahoo.com wrote: Hi All, For CME Background we need 3 files, 2 images and one List XML file. Is there any way to complete this task with only with 2 images and not List XML file? Basically what would be the solution if you provided with only 2 images and NOT List XML file. Chris ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -Inline Attachment Follows- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] No service configured on phone display
Yes. Go to bat. Create a 7965 template with the minimum settings then subscribe the services to the template. The you can updates phones and select the option to add the services to the phone. -- On Jun 8, 2011, at 11:46, adam compton com...@gmail.com wrote: You can add services with BAT? On Wed, Jun 8, 2011 at 1:20 PM, cciefo...@hotmail.com wrote: You have delete the enterprise services and then re add them as regular services. Then add them all as new service to the phones that need it using BAT. THAT'S IT. -Original Message- From: Ki Wi kiwi.vo...@gmail.com Sender: ccie_voice-boun...@onlinestudylist.com Date: Wed, 8 Jun 2011 23:39:53 To: adam comptoncom...@gmail.com Cc: ccie_voice@onlinestudylist.com; Rahul Kaporrahul.kapo...@gmail.com; ccie_voice-boun...@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] No service configured on phone display ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] I just failed the LAB 5
right on ! good luck ! 2011/6/8 adam compton com...@gmail.com I guess I'm a glutton for punishment. Scheduled for July 21st in RTP On Tue, Jun 7, 2011 at 10:50 AM, adam compton com...@gmail.com wrote: Just failed the LAB 5 everybody has been talking about. I felt very prepared, but not for that test. Alot of things that IPExpert has never touched. That sucks cuz I was trying to use them solely. I feel like I'm going to have to throw down more money for a different study guide... Anywho, I was wondering what the chances are to get the same lab twice. If you take a lab, is it pretty much disqualified from you repeating it? Adam Compton ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UC, AAR and transformation CSS
Hi victor. Try setting the calling num mask to in the hunt pilot for the voice mail pilot. Also ensure that your mask is in the voice mail pilot. -- On Jun 8, 2011, at 14:01, Victor Malyuga victor_maly...@yahoo.com wrote: I have a strange issue with Unity Connection access over AAR. Remote site phone calls UC under AAR condition and UC plays opening greeting instead of subscriber sign in greeting. Calling numbers are globalized on HQ GW and then localized in HQ device pool. UC ports are in this device pool. If I remove calling party transformation CSS from the device pool then subscriber sign in greeting is played. It seems like a bug in UC. I could not find anything in the bug toolkit. Did anyone have this problem? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml
Hi Randall, IF we do not do step 5 then the phone in question will continue to point to old TFTP server which does not have a modified Ringlist.xml file. If the question is to delete a particular ringtone from Phone7 at Site Z. Then you need to direct Phone7 at Site Z to a TFTP server which has the modified Ringlist.xml file. Instead of manually changing TFTP address on phone, you can assign different TFTP using DHCP server for a particualr MAC address. -adil On Thu, Jun 9, 2011 at 12:09 AM, Randall Saborio ill2...@gmail.com wrote: I don't understand why step 5. Dont you have the phones pointing to that server already? If you talk about CME phones, then the ringlist must be uploaded to CME, not CUCM. On Wed, Jun 8, 2011 at 2:16 AM, Adil Shaikh adil.sha...@gmail.com wrote: Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UC, AAR and transformation CSS
I set all this. If works if you do not have a transformation CSS in the device pool. I wonder if someone can replicate this in their lab. --- On Wed, 8/6/11, CCIEV cc...@corb.net wrote: From: CCIEV cc...@corb.net Subject: Re: [OSL | CCIE_Voice] UC, AAR and transformation CSS To: Victor Malyuga victor_maly...@yahoo.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Wednesday, 8 June, 2011, 22:13 Hi victor. Try setting the calling num mask to in the hunt pilot for the voice mail pilot. Also ensure that your mask is in the voice mail pilot. -- On Jun 8, 2011, at 14:01, Victor Malyuga victor_maly...@yahoo.com wrote: I have a strange issue with Unity Connection access over AAR. Remote site phone calls UC under AAR condition and UC plays opening greeting instead of subscriber sign in greeting. Calling numbers are globalized on HQ GW and then localized in HQ device pool. UC ports are in this device pool. If I remove calling party transformation CSS from the device pool then subscriber sign in greeting is played. It seems like a bug in UC. I could not find anything in the bug toolkit. Did anyone have this problem? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml
I still don't follow you. If your DHCP has Publisher as TFTP, then why would you change the RingList on some other tftp server instead of on Publisher. On Wed, Jun 8, 2011 at 3:18 PM, Adil Shaikh adil.sha...@gmail.com wrote: Hi Randall, IF we do not do step 5 then the phone in question will continue to point to old TFTP server which does not have a modified Ringlist.xml file. If the question is to delete a particular ringtone from Phone7 at Site Z. Then you need to direct Phone7 at Site Z to a TFTP server which has the modified Ringlist.xml file. Instead of manually changing TFTP address on phone, you can assign different TFTP using DHCP server for a particualr MAC address. -adil On Thu, Jun 9, 2011 at 12:09 AM, Randall Saborio ill2...@gmail.comwrote: I don't understand why step 5. Dont you have the phones pointing to that server already? If you talk about CME phones, then the ringlist must be uploaded to CME, not CUCM. On Wed, Jun 8, 2011 at 2:16 AM, Adil Shaikh adil.sha...@gmail.comwrote: Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml
what if you have the subscriber working as a TFTP as well ? 2011/6/8 Randall Saborio ill2...@gmail.com I still don't follow you. If your DHCP has Publisher as TFTP, then why would you change the RingList on some other tftp server instead of on Publisher. On Wed, Jun 8, 2011 at 3:18 PM, Adil Shaikh adil.sha...@gmail.com wrote: Hi Randall, IF we do not do step 5 then the phone in question will continue to point to old TFTP server which does not have a modified Ringlist.xml file. If the question is to delete a particular ringtone from Phone7 at Site Z. Then you need to direct Phone7 at Site Z to a TFTP server which has the modified Ringlist.xml file. Instead of manually changing TFTP address on phone, you can assign different TFTP using DHCP server for a particualr MAC address. -adil On Thu, Jun 9, 2011 at 12:09 AM, Randall Saborio ill2...@gmail.comwrote: I don't understand why step 5. Dont you have the phones pointing to that server already? If you talk about CME phones, then the ringlist must be uploaded to CME, not CUCM. On Wed, Jun 8, 2011 at 2:16 AM, Adil Shaikh adil.sha...@gmail.comwrote: Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml
I believe, if you need different ring tones for different phones, you need different ring tone lists. On pub you can have only one RingList.xml file, which means all phones will have same ring tones. So, if you want differnt tone sets available to different phones, you will need different tftp srevers for differnet RingList.xml files, which will have different contents. From: Randall Saborio ill2...@gmail.com To: Adil Shaikh adil.sha...@gmail.com Cc: ccie_voice@onlinestudylist.com Sent: Wednesday, June 8, 2011 4:27 PM Subject: Re: [OSL | CCIE_Voice] Ringlist.xml and List.xml I still don't follow you. If your DHCP has Publisher as TFTP, then why would you change the RingList on some other tftp server instead of on Publisher. On Wed, Jun 8, 2011 at 3:18 PM, Adil Shaikh adil.sha...@gmail.com wrote: Hi Randall, IF we do not do step 5 then the phone in question will continue to point to old TFTP server which does not have a modified Ringlist.xml file. If the question is to delete a particular ringtone from Phone7 at Site Z. Then you need to direct Phone7 at Site Z to a TFTP server which has the modified Ringlist.xml file. Instead of manually changing TFTP address on phone, you can assign different TFTP using DHCP server for a particualr MAC address. -adil On Thu, Jun 9, 2011 at 12:09 AM, Randall Saborio ill2...@gmail.com wrote: I don't understand why step 5. Dont you have the phones pointing to that server already? If you talk about CME phones, then the ringlist must be uploaded to CME, not CUCM. On Wed, Jun 8, 2011 at 2:16 AM, Adil Shaikh adil.sha...@gmail.com wrote: Hi All, There are two simple questions (easy score points) raised in some ccie voice forums. They are add Background Image (create List.xml) on a phone and Removal a particular Ringtone (edit Ringlist.xml) from a phone. For BGimage 7965 admin guide shows the clear example of List.xml file. However, for the removal of particular ringtone from Ringlist.xml, i am practicing following method. If anyone know another method then could you please let me know. 1) ssh to PUB and issue command file view tftp Ringlist.xml 2) Copy 110 lines to notepad and remove appropriate tag lines and save it on desktop as Ringlist.xml 3) Go to CM OS admin page and upload Ringlist.xml in / directory of non-tftp running CM. 4) Start TFTP service on that CM 5) Change TFTP address on the phone to point to a above CM. This is manually changing TFTP address which was originally assigned from DHCP server. Thanks -adil -- . . . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 -- . . . . _7___|___|_|_|adil.sha...@gmail.com . . -- Randall da ill Saborio CCIE Voice Wannabe #10054675811 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
