Re: [OSL | CCIE_Voice] fast start H323 failed
ocol=cisco > ProtocolCallId= > SessionTarget=ipv4:192.168.1.50 > OnTimeRvPlayout=66110 > GapFillWithSilence=0 ms > GapFillWithPrediction=0 ms > GapFillWithInterpolation=0 ms > GapFillWithRedundancy=0 ms > HiWaterPlayoutDelay=65 ms > LoWaterPlayoutDelay=55 ms > TxPakNumber=3308 > TxSignalPak=0 > TxComfortNoisePak=0 > TxDuration=66160 > TxVoiceDuration=66160 > RxPakNumber=3310 > RxSignalPak=0 > RxComfortNoisePak=0 > RxDuration=66160 > RxVoiceDuration=66110 > RxOutOfSeq=0 > RxLatePak=0 > RxEarlyPak=1 > RxBadProtocol=0 > PlayDelayCurrent=55 > PlayDelayMin=55 > PlayDelayMax=65 > PlayDelayClockOffset=-1506743064 > PlayDelayJitter=0 ms > PlayErrPredictive=0 > PlayErrInterpolative=0 > PlayErrSilence=0 > PlayErrBufferOverFlow=30 > PlayErrRetroactive=2 > PlayErrTalkspurt=0 > OutSignalLevel=-50 > InSignalLevel=-48 > LevelTxPowerMean=0 > LevelRxPowerMean=0 > LevelBgNoise=0 > ERLLevel=9 > ACOMLevel=9 > ErrRxDrop=0 > ErrTxDrop=0 > ErrTxControl=0 > ErrRxControl=0 > ReceiveDelay=55 ms > LostPackets=0 > EarlyPackets=1 > LatePackets=0 > SRTP = off > TextRelay = off > VAD = disabled > CoderTypeRate=g711ulaw > CodecBytes=160 > Media Setting=flow-through > AlertTimepoint=1340730 ms > CallerName=Emergency Services > CallerIDBlocked=False > OriginalCallingNumber= > OriginalCallingOctet=0x0 > OriginalCalledNumber=3001 > OriginalCalledOctet=0xA1 > OriginalRedirectCalledNumber= > OriginalRedirectCalledOctet=0xFF > TranslatedCallingNumber= > TranslatedCallingOctet=0x0 > TranslatedCalledNumber=3001 > TranslatedCalledOctet=0xA1 > TranslatedRedirectCalledNumber= > TranslatedRedirectCalledOctet=0xFF > GwReceivedCalledNumber=4083873001 > GwReceivedCalledOctet3=0xA1 > GwOutpulsedCalledNumber=3001 > GwOutpulsedCalledOctet3=0xA1 > MediaInactiveDetected=no > MediaInactiveTimestamp= > MediaControlReceived= > LongDurationCallDetected=no > LongDurCallTimestamp= > LongDurcallDuration= > Username= > > Telephony call-legs: 1 > SIP call-legs: 0 > H323 call-legs: 1 > Call agent controlled call-legs: 0 > SCCP call-legs: 0 > Multicast call-legs: 0 > Media call-legs: 0 > Total call-legs: 2 > > R2# > > > > On Thu, Jul 4, 2013 at 4:28 PM, Karen Johnson > wrote: > > hi Edgar and all, > > Here is what I did and still not able to see "Fast Connect= True". (still > show FALSE) > > - MRM SB : SB-xcode (also try with MTP) > - MRGL SB assigned to SB-GW H323. > - checked "Inbound Fast start " and "Outbound Fast Start" > > when i call from SB phone to 911 and vice versa. I did not see Fast Start. > > - Can you write correct detailed steps here? > > tks > > > -- > *From:* Edgar Feliz > *To:* Karen Johnson > *Cc:* "ccie_voice@onlinestudylist.com" > *Sent:* Wednesday, July 3, 2013 6:20:55 PM > *Subject:* Re: [OSL | CCIE_Voice] fast start H323 > > Karen See below for fast connect... Make sure you are looking at the > section that has the RemoteIPAddress with the IP address of the CM. Also > did you enable F/S on the CM? > > VOIP: > ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > CallID=7 > RemoteIPAddress=192.168.1.51 > RemoteUDPPort=17628 > RemoteSignallingIPAddress=192.168.1.51 > RemoteSignallingPort=1720 > RemoteMediaIPAddress=10.10.110.2 > RemoteMediaPort=17628 > RoundTripDelay=0 ms > SelectedQoS=best-effort > tx_DtmfRelay=h245-alphanumeric > FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start > > > Edgar > > > On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson > wrote: > > experts, > > i have configure H323 GW to be "Fast start" by using Transcoder and > enable "fast start" under service voip in IOS GW. > > however when i make call and verified using " sh call acti voice" and > looking at "Fast Connect"= False. > > - is there any thing else needed to make this work ? > - what is the right steps to implement this : Inbound Fast Start to UCM > and Outbound Fast Start from UCM ? > > tks > K > > > > > > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > > > > > > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323 failed
gt;RxLatePak=0 >RxEarlyPak=1 >RxBadProtocol=0 >PlayDelayCurrent=55 >PlayDelayMin=55 >PlayDelayMax=65 >PlayDelayClockOffset=-1506743064 >PlayDelayJitter=0 ms >PlayErrPredictive=0 >PlayErrInterpolative=0 >PlayErrSilence=0 >PlayErrBufferOverFlow=30 >PlayErrRetroactive=2 >PlayErrTalkspurt=0 >OutSignalLevel=-50 >InSignalLevel=-48 >LevelTxPowerMean=0 >LevelRxPowerMean=0 >LevelBgNoise=0 >ERLLevel=9 >ACOMLevel=9 >ErrRxDrop=0 >ErrTxDrop=0 >ErrTxControl=0 >ErrRxControl=0 >ReceiveDelay=55 ms >LostPackets=0 >EarlyPackets=1 >LatePackets=0 >SRTP = off >TextRelay = off >VAD = disabled >CoderTypeRate=g711ulaw >CodecBytes=160 >Media Setting=flow-through >AlertTimepoint=1340730 ms >CallerName=Emergency Services >CallerIDBlocked=False >OriginalCallingNumber= >OriginalCallingOctet=0x0 >OriginalCalledNumber=3001 >OriginalCalledOctet=0xA1 >OriginalRedirectCalledNumber= >OriginalRedirectCalledOctet=0xFF >TranslatedCallingNumber= >TranslatedCallingOctet=0x0 >TranslatedCalledNumber=3001 >TranslatedCalledOctet=0xA1 >TranslatedRedirectCalledNumber= >TranslatedRedirectCalledOctet=0xFF >GwReceivedCalledNumber=4083873001 >GwReceivedCalledOctet3=0xA1 >GwOutpulsedCalledNumber=3001 >GwOutpulsedCalledOctet3=0xA1 >MediaInactiveDetected=no >MediaInactiveTimestamp= >MediaControlReceived= >LongDurationCallDetected=no >LongDurCallTimestamp= >LongDurcallDuration= >Username= > > >Telephony call-legs: 1 >SIP call-legs: 0 >H323 call-legs: 1 >Call agent controlled call-legs: 0 >SCCP call-legs: 0 >Multicast call-legs: 0 >Media call-legs: 0 >Total call-legs: 2 > > >R2# > > > > >On Thu, Jul 4, 2013 at 4:28 PM, Karen Johnson >wrote: > >hi Edgar and all, >> >>Here is what I did and still not able to see "Fast Connect= True". (still >>show FALSE) >> >>- MRM SB : SB-xcode (also try with MTP) >>- MRGL SB assigned to SB-GW H323. >>- checked "Inbound Fast start " and "Outbound Fast Start" >> >>when i call from SB phone to 911 and vice versa. I did not see Fast Start. >> >>- Can you write correct detailed steps here? >> >>tks >> >> >> >> >> >> >> >> From: Edgar Feliz >>To: Karen Johnson >>Cc: "ccie_voice@onlinestudylist.com" >>Sent: Wednesday, July 3, 2013 6:20:55 PM >>Subject: Re: [OSL | CCIE_Voice] fast start H323 >> >> >> >>Karen See below for fast connect... Make sure you are looking at the section >>that has the RemoteIPAddress with the IP address of the CM. Also did you >>enable F/S on the CM? >> >> >>VOIP: >>ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] >>IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] >>CallID=7 >>RemoteIPAddress=192.168.1.51 >>RemoteUDPPort=17628 >>RemoteSignallingIPAddress=192.168.1.51 >>RemoteSignallingPort=1720 >>RemoteMediaIPAddress=10.10.110.2 >>RemoteMediaPort=17628 >>RoundTripDelay=0 ms >>SelectedQoS=best-effort >>tx_DtmfRelay=h245-alphanumeric >>FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start >> >> >> >> >>Edgar >> >> >> >>On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson >>wrote: >> >>experts, >>> >>> >>>i have configure H323 GW to be "Fast start" by using Transcoder and enable >>>"fast start" under service voip in IOS GW. >>> >>> >>>however when i make call and verified using " sh call acti voice" and >>>looking at "Fast Connect"= False. >>> >>> >>>- is there any thing else needed to make this work ? >>>- what is the right steps to implement this : Inbound Fast Start to UCM >>>and Outbound Fast Start from UCM ? >>> >>> >>>tksK >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>>___ >>>For more information regarding industry leading CCIE Lab training, please >>>visit www.ipexpert.com >>> >>>Are you a CCNP or CCIE and looking for a job? Check out >>>www.PlatinumPlacement.com >>> >> >> >> > > >___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323 failed
t; LevelBgNoise=0 > ERLLevel=9 > ACOMLevel=9 > ErrRxDrop=0 > ErrTxDrop=0 > ErrTxControl=0 > ErrRxControl=0 > ReceiveDelay=55 ms > LostPackets=0 > EarlyPackets=1 > LatePackets=0 > SRTP = off > TextRelay = off > VAD = disabled > CoderTypeRate=g711ulaw > CodecBytes=160 > Media Setting=flow-through > AlertTimepoint=1340730 ms > CallerName=Emergency Services > CallerIDBlocked=False > OriginalCallingNumber= > OriginalCallingOctet=0x0 > OriginalCalledNumber=3001 > OriginalCalledOctet=0xA1 > OriginalRedirectCalledNumber= > OriginalRedirectCalledOctet=0xFF > TranslatedCallingNumber= > TranslatedCallingOctet=0x0 > TranslatedCalledNumber=3001 > TranslatedCalledOctet=0xA1 > TranslatedRedirectCalledNumber= > TranslatedRedirectCalledOctet=0xFF > GwReceivedCalledNumber=4083873001 > GwReceivedCalledOctet3=0xA1 > GwOutpulsedCalledNumber=3001 > GwOutpulsedCalledOctet3=0xA1 > MediaInactiveDetected=no > MediaInactiveTimestamp= > MediaControlReceived= > LongDurationCallDetected=no > LongDurCallTimestamp= > LongDurcallDuration= > Username= > > Telephony call-legs: 1 > SIP call-legs: 0 > H323 call-legs: 1 > Call agent controlled call-legs: 0 > SCCP call-legs: 0 > Multicast call-legs: 0 > Media call-legs: 0 > Total call-legs: 2 > > R2# > > > > On Thu, Jul 4, 2013 at 4:28 PM, Karen Johnson > wrote: > > hi Edgar and all, > > Here is what I did and still not able to see "Fast Connect= True". (still > show FALSE) > > - MRM SB : SB-xcode (also try with MTP) > - MRGL SB assigned to SB-GW H323. > - checked "Inbound Fast start " and "Outbound Fast Start" > > when i call from SB phone to 911 and vice versa. I did not see Fast Start. > > - Can you write correct detailed steps here? > > tks > > > -- > *From:* Edgar Feliz > *To:* Karen Johnson > *Cc:* "ccie_voice@onlinestudylist.com" > *Sent:* Wednesday, July 3, 2013 6:20:55 PM > *Subject:* Re: [OSL | CCIE_Voice] fast start H323 > > Karen See below for fast connect... Make sure you are looking at the > section that has the RemoteIPAddress with the IP address of the CM. Also > did you enable F/S on the CM? > > VOIP: > ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > CallID=7 > RemoteIPAddress=192.168.1.51 > RemoteUDPPort=17628 > RemoteSignallingIPAddress=192.168.1.51 > RemoteSignallingPort=1720 > RemoteMediaIPAddress=10.10.110.2 > RemoteMediaPort=17628 > RoundTripDelay=0 ms > SelectedQoS=best-effort > tx_DtmfRelay=h245-alphanumeric > FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start > > > Edgar > > > On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson > wrote: > > experts, > > i have configure H323 GW to be "Fast start" by using Transcoder and > enable "fast start" under service voip in IOS GW. > > however when i make call and verified using " sh call acti voice" and > looking at "Fast Connect"= False. > > - is there any thing else needed to make this work ? > - what is the right steps to implement this : Inbound Fast Start to UCM > and Outbound Fast Start from UCM ? > > tks > K > > > > > > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > > > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323 failed
t controlled call-legs: 0 SCCP call-legs: 0 Multicast call-legs: 0 Media call-legs: 0 Total call-legs: 2 R2# On Thu, Jul 4, 2013 at 4:28 PM, Karen Johnson wrote: hi Edgar and all, > >Here is what I did and still not able to see "Fast Connect= True". (still show >FALSE) > >- MRM SB : SB-xcode (also try with MTP) >- MRGL SB assigned to SB-GW H323. >- checked "Inbound Fast start " and "Outbound Fast Start" > >when i call from SB phone to 911 and vice versa. I did not see Fast Start. > >- Can you write correct detailed steps here? > >tks > > > > > > > > From: Edgar Feliz >To: Karen Johnson >Cc: "ccie_voice@onlinestudylist.com" >Sent: Wednesday, July 3, 2013 6:20:55 PM >Subject: Re: [OSL | CCIE_Voice] fast start H323 > > > >Karen See below for fast connect... Make sure you are looking at the section >that has the RemoteIPAddress with the IP address of the CM. Also did you >enable F/S on the CM? > > >VOIP: >ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] >IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] >CallID=7 >RemoteIPAddress=192.168.1.51 >RemoteUDPPort=17628 >RemoteSignallingIPAddress=192.168.1.51 >RemoteSignallingPort=1720 >RemoteMediaIPAddress=10.10.110.2 >RemoteMediaPort=17628 >RoundTripDelay=0 ms >SelectedQoS=best-effort >tx_DtmfRelay=h245-alphanumeric >FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start > > > > >Edgar > > > >On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson >wrote: > >experts, >> >> >>i have configure H323 GW to be "Fast start" by using Transcoder and enable >>"fast start" under service voip in IOS GW. >> >> >>however when i make call and verified using " sh call acti voice" and looking >>at "Fast Connect"= False. >> >> >>- is there any thing else needed to make this work ? >>- what is the right steps to implement this : Inbound Fast Start to UCM and >>Outbound Fast Start from UCM ? >> >> >>tksK >> >> >> >> >> >> >> >> >> >> >> >> >>___ >>For more information regarding industry leading CCIE Lab training, please >>visit www.ipexpert.com >> >>Are you a CCNP or CCIE and looking for a job? Check out >>www.PlatinumPlacement.com >> > > >___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323 failed
did not see Fast Start. > > - Can you write correct detailed steps here? > > tks > > > ------ > *From:* Edgar Feliz > *To:* Karen Johnson > *Cc:* "ccie_voice@onlinestudylist.com" > *Sent:* Wednesday, July 3, 2013 6:20:55 PM > *Subject:* Re: [OSL | CCIE_Voice] fast start H323 > > Karen See below for fast connect... Make sure you are looking at the > section that has the RemoteIPAddress with the IP address of the CM. Also > did you enable F/S on the CM? > > VOIP: > ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > CallID=7 > RemoteIPAddress=192.168.1.51 > RemoteUDPPort=17628 > RemoteSignallingIPAddress=192.168.1.51 > RemoteSignallingPort=1720 > RemoteMediaIPAddress=10.10.110.2 > RemoteMediaPort=17628 > RoundTripDelay=0 ms > SelectedQoS=best-effort > tx_DtmfRelay=h245-alphanumeric > FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start > > > Edgar > > > On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson > wrote: > > experts, > > i have configure H323 GW to be "Fast start" by using Transcoder and > enable "fast start" under service voip in IOS GW. > > however when i make call and verified using " sh call acti voice" and > looking at "Fast Connect"= False. > > - is there any thing else needed to make this work ? > - what is the right steps to implement this : Inbound Fast Start to UCM > and Outbound Fast Start from UCM ? > > tks > K > > > > > > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] fast start H323 failed
hi Edgar and all, Here is what I did and still not able to see "Fast Connect= True". (still show FALSE) - MRM SB : SB-xcode (also try with MTP) - MRGL SB assigned to SB-GW H323. - checked "Inbound Fast start " and "Outbound Fast Start" when i call from SB phone to 911 and vice versa. I did not see Fast Start. - Can you write correct detailed steps here? tks From: Edgar Feliz To: Karen Johnson Cc: "ccie_voice@onlinestudylist.com" Sent: Wednesday, July 3, 2013 6:20:55 PM Subject: Re: [OSL | CCIE_Voice] fast start H323 Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP: ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] CallID=7 RemoteIPAddress=192.168.1.51 RemoteUDPPort=17628 RemoteSignallingIPAddress=192.168.1.51 RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2 RemoteMediaPort=17628 RoundTripDelay=0 ms SelectedQoS=best-effort tx_DtmfRelay=h245-alphanumeric FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson wrote: experts, > > >i have configure H323 GW to be "Fast start" by using Transcoder and enable >"fast start" under service voip in IOS GW. > > >however when i make call and verified using " sh call acti voice" and looking >at "Fast Connect"= False. > > >- is there any thing else needed to make this work ? >- what is the right steps to implement this : Inbound Fast Start to UCM and >Outbound Fast Start from UCM ? > > >tksK > > > > > > > > > > > > >___ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com >___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323
Thanks Edgar. I try again now, still not show From: Edgar Feliz To: Karen Johnson Cc: "ccie_voice@onlinestudylist.com" Sent: Wednesday, July 3, 2013 6:20:55 PM Subject: Re: [OSL | CCIE_Voice] fast start H323 Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP: ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] CallID=7 RemoteIPAddress=192.168.1.51 RemoteUDPPort=17628 RemoteSignallingIPAddress=192.168.1.51 RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2 RemoteMediaPort=17628 RoundTripDelay=0 ms SelectedQoS=best-effort tx_DtmfRelay=h245-alphanumeric FastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson wrote: experts, > > >i have configure H323 GW to be "Fast start" by using Transcoder and enable >"fast start" under service voip in IOS GW. > > >however when i make call and verified using " sh call acti voice" and looking >at "Fast Connect"= False. > > >- is there any thing else needed to make this work ? >- what is the right steps to implement this : Inbound Fast Start to UCM and >Outbound Fast Start from UCM ? > > >tksK > > > > > > > > > > > > >___ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com >___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323
Hi Edgar, that is not the "h323 message", in the question, saying " h323 message only". -ikizoo Date: Wed, 3 Jul 2013 20:29:02 -0400 From: ejzi...@gmail.com To: karen.johnson...@yahoo.ca CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] fast start H323 Also on CM side with h245/h225 trace on this is the out F/S 05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128): FastStartInfo: Outbound FastStart Triggered - PreAllocating MTP| There is a similar message for inbound. Edgar On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz wrote: Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP:ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08]CallID=7RemoteIPAddress=192.168.1.51RemoteUDPPort=17628RemoteSignallingIPAddress=192.168.1.51RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2RemoteMediaPort=17628RoundTripDelay=0 msSelectedQoS=best-efforttx_DtmfRelay=h245-alphanumericFastConnect=TRUE <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson wrote: experts, i have configure H323 GW to be "Fast start" by using Transcoder and enable "fast start" under service voip in IOS GW. however when i make call and verified using " sh call acti voice" and looking at "Fast Connect"= False. - is there any thing else needed to make this work ? - what is the right steps to implement this : Inbound Fast Start to UCM and Outbound Fast Start from UCM ? tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323
Karen See below for fast connect... Make sure you are looking at the section that has the RemoteIPAddress with the IP address of the CM. Also did you enable F/S on the CM? VOIP: ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] CallID=7 RemoteIPAddress=192.168.1.51 RemoteUDPPort=17628 RemoteSignallingIPAddress=192.168.1.51 RemoteSignallingPort=1720 RemoteMediaIPAddress=10.10.110.2 RemoteMediaPort=17628 RoundTripDelay=0 ms SelectedQoS=best-effort tx_DtmfRelay=h245-alphanumeric FastConnect=TRUE fast Start Edgar On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson wrote: > experts, > > i have configure H323 GW to be "Fast start" by using Transcoder and > enable "fast start" under service voip in IOS GW. > > however when i make call and verified using " sh call acti voice" and > looking at "Fast Connect"= False. > > - is there any thing else needed to make this work ? > - what is the right steps to implement this : Inbound Fast Start to UCM > and Outbound Fast Start from UCM ? > > tks > K > > > > > > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] fast start H323
Also on CM side with h245/h225 trace on this is the out F/S 05/21/2013 19:10:04.653 CCM|H225Cdpc::null0_CcSetupReq(3, 39229128): FastStartInfo: Outbound FastStart Triggered - PreAllocating MTP| There is a similar message for inbound. Edgar On Wed, Jul 3, 2013 at 8:20 PM, Edgar Feliz wrote: > Karen See below for fast connect... Make sure you are looking at the > section that has the RemoteIPAddress with the IP address of the CM. Also > did you enable F/S on the CM? > > VOIP: > ConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > IncomingConnectionId[0x43E821AF 0xB06B11E2 0x80020025 0x45D31A08] > CallID=7 > RemoteIPAddress=192.168.1.51 > RemoteUDPPort=17628 > RemoteSignallingIPAddress=192.168.1.51 > RemoteSignallingPort=1720 > RemoteMediaIPAddress=10.10.110.2 > RemoteMediaPort=17628 > RoundTripDelay=0 ms > SelectedQoS=best-effort > tx_DtmfRelay=h245-alphanumeric > FastConnect=TRUE fast Start > > > Edgar > > > On Wed, Jul 3, 2013 at 7:20 PM, Karen Johnson > wrote: > >> experts, >> >> i have configure H323 GW to be "Fast start" by using Transcoder and >> enable "fast start" under service voip in IOS GW. >> >> however when i make call and verified using " sh call acti voice" and >> looking at "Fast Connect"= False. >> >> - is there any thing else needed to make this work ? >> - what is the right steps to implement this : Inbound Fast Start to UCM >> and Outbound Fast Start from UCM ? >> >> tks >> K >> >> >> >> >> >> >> >> ___ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] fast start H323
experts, i have configure H323 GW to be "Fast start" by using Transcoder and enable "fast start" under service voip in IOS GW. however when i make call and verified using " sh call acti voice" and looking at "Fast Connect"= False. - is there any thing else needed to make this work ? - what is the right steps to implement this : Inbound Fast Start to UCM and Outbound Fast Start from UCM ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com