Re: slash 31 address
Michael... /30 = 4 address (1st is network number, 2 & 3 host ip's, 4th is broadcast address) /31 = 2 address (1st is network number, 2nd is broadcast address) no host ip's...this is not useful.. /32 = 1 address (1 host address) i use this for loopbacks ""Neil Schneider"" <[EMAIL PROTECTED]> wrote in message 94mool$d33$[EMAIL PROTECTED]">news:94mool$d33$[EMAIL PROTECTED]... > AFAIK you can only go as far as /30. > > Neil Schneider > > <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > > > Hello good guys of the group, can anyone with the knowledge of ip/31, help > me? > > please. > > > > I need to know what it is use for, and how it works, pls. > > > > Thanks in advance, > > > > Michael Taiwo. > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Has anyone purchase cables from this company before?
I ordered 5 60pin back to back cables...they came quickly and all worked finebest price that I could find...better than ebayetc. "fartcatcher" <[EMAIL PROTECTED]> wrote in message 95fhak$6e9$[EMAIL PROTECTED]">news:95fhak$6e9$[EMAIL PROTECTED]... > http://catalog.symmic.com/viewProduct.cfm?item_id=398076 > > They sell db60 DTE/DCE cables and lingerie(?). I have 2 2509s and a 2503 that > I wold like to setup a lab with and I need the db60 cables. > > Anyone ordered from them before? > > Thanks, > fartcatcher. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ECP1 lab. Is it worth it?
i dink dis is good classroomie #3765well worth my peanuts ""Charles Henson"" <[EMAIL PROTECTED]> wrote in message 95n3ml$5ar$[EMAIL PROTECTED]">news:95n3ml$5ar$[EMAIL PROTECTED]... > I've heard a lot of folks mention different prep courses for the CCIE lab > and ECP1 seems to be pretty well recommended. When I went to the site, > however, the web pages imply that this is a preparation tool for "beginning" > your CCIE lab track and isolating weaknesses to further focus on. I was > going to take this class a week or so prior to my lab (scheduled for august > and I'm not rushed to swap it up) but am not so sure now. Could someone > who's done this please reply to this post or email me directly about their > experiences with it? Thanks. > > > > -- > Charles Henson > [EMAIL PROTECTED] > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ECP1 lab. Is it worth it?
being a smart-ass...just a joke with my friend charlesim not intending to stir anything up "Nathan Casassa" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > 3765 is Val's number .What are you referring to Jeff? > > Jeff McCoy wrote: > > > i dink dis is good classroomie #3765well worth my peanuts > > > > ""Charles Henson"" <[EMAIL PROTECTED]> wrote in message > > 95n3ml$5ar$[EMAIL PROTECTED]">news:95n3ml$5ar$[EMAIL PROTECTED]... > > > I've heard a lot of folks mention different prep courses for the CCIE lab > > > and ECP1 seems to be pretty well recommended. When I went to the site, > > > however, the web pages imply that this is a preparation tool for > > "beginning" > > > your CCIE lab track and isolating weaknesses to further focus on. I was > > > going to take this class a week or so prior to my lab (scheduled for > > august > > > and I'm not rushed to swap it up) but am not so sure now. Could someone > > > who's done this please reply to this post or email me directly about their > > > experiences with it? Thanks. > > > > > > > > > > > > -- > > > Charles Henson > > > [EMAIL PROTECTED] > > > > > > > > > _ > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > _ > > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: RIF and dlsw
2 rifs for this... .0021.00a0 .0485.0080 ""Garry Baker"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Guys, > > I am having some problems understanding what the rif should be fro a dlsw connection. I understand how to get the rif for a standard srb network but can't get my head around dlsw terminating the rif. If you had the following scenerio, what would be the rif from host a to host b and vice versa? > > > > > Host-a -- ring 2 - -bridge 1 --virtual ring 10 -- virtual ring 30 --bridge 5-- ring 8 > > > > Bakes > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Looking for some logic here......
to summarize then: bridging (low,low) - lowest priority root - lowest port cost forwarding router ids (highest lb,up/up int) dr/bdr (highest priority) HSRP active (highest priority) routing decision outbound (high) (highest value weight, local pref) routing decision advertised as best inbound (low) (lowest value med) queueing (high to low) priority - 0..3 high..low custom - 0..16 high..low ""dre"" <[EMAIL PROTECTED]> wrote in message 91rhqs$jee$[EMAIL PROTECTED]">news:91rhqs$jee$[EMAIL PROTECTED]... > spanning tree root bridge - lowest priority (default 32768) > ospf router id - highest ip address of a loopback int, if none: highest > up/up interface > ospf dr and bdr - highest priority segments become dr, second highest > becomes bdr > bgp router id - highest ip address of a loopback int, if none: highest up/up > interface > bgp local pref - higher local pref is favored over a lower local pref > (default 100) > bgp weight - higher weight is favored over a lower weight (default 32768) > bgp med - lower med is preferred over a higher med (default 0) > isis dis - highest interface priority (default 64), tie goes to highest snpa > hsrp - higest primrary ip address for group x will become active (default > 100) > custom queueing - lowest queue is serviced first (0 to 16) > priority queueing - high, then medium, then normal, then low > igmp v2 query - lowest ip address on multicast segments elected as the > querying router > pim sparse mode dr - highest ip address on pim segments becomes pim dr > local tdp id - highest ip address of a loopback int, if none: highest up/up > interface > > hope that helps. > > -dre > > ""Charles Henson"" <[EMAIL PROTECTED]> wrote in message > 91rdst$bqt$[EMAIL PROTECTED]">news:91rdst$bqt$[EMAIL PROTECTED]... > > Is there any logic or rule of thumb that can be used to remember what is > > selected by the lowest value and what is selected by the highes value? > > IE.STP root bridge designation is based on the LOWEST mac. OSPF DR is > > based on the highest priority. Each one has to do with it's own subject > > matter I know but I can't seem to get them all separated and on the > written > > that could encompass several questions. > > (written scheduled for this friday)(confidence is not high) > > > > Charles > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Question
Is it possible to specify a CIR for each DLCI on a router that has been converted to a frame switch? Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OSPF Redistribution
I have a senerio like this redistributing rtr int s0/0.3 - 152.52.0.3 /24 p int s0/0.4 - 152.52.64.3 /24 m int e0/0 - 152.52.2.1 /23 int loop0 - 152.52.15.254 /32 router ospf 500 net 152.52.0.0 0.0.15.255 area 0 router igrp 400 redistribute ospf 500 met 100 1 255 1 1500 passive-interface Ethernet0/0 passive-interface Serial0/0.3 passive-interface Loopback0 network 152.52.0.0 neighbor 152.52.64.4 Other OSPF routers have various masks for interfaces. I understand that only /24 networks will redistribute. On ABRs I put a statement like: area 3 range 152.52.33.0 255.255.255.0 This allows the IGRP to get the 33.0 /24 network. How do I get the networks 152.52.15.254/32 and 152.52.2.0/23 on area 0 to redistribute into IGRP? I have tried to add a statment like this on the redistributing router: area 0 range 152.52.15.0 255.255.255.0 This does not work. Any ideas? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OSPF Redistribution
this works greatthanks. "Chris McCoy" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Jeff, > > Depending on IOS version there is a slight "feature" > (I say bug) that allows you to do this. > > You make a 'summary-address' statement under your > router ospf 500 configuration that covers the subnets > you wish to summarize at the classful boundry, in this > case it would be: > > router ospf 500 > summary-address 152.52.15.0 255.255.255.0 > summary-address 152.52.2.0 255.255.255.0 > > What this does is create two routes with the above > mentioned addresses and points them to the Null 0 > interface. These routes will be redistributed into > IGRP and will propagate these as normal out Serial 0.4 > since you are in the same basic "class B" range. If > your serial interface were in a different class, you > wouldn't need to do this since it would get > auto-summarized to 152.52.0.0. Keep in mind that once > you pick a subnet mask, you must stick with it > throughout the same classful address. I say this is a > bug since summary-address is normally used when you > are redistributing other protocols into OSPF to > summarize a range. Others may disagree. > > Chris M. > > --- Jeff McCoy <[EMAIL PROTECTED]> wrote: > > I have a senerio like this > > > > redistributing rtr > > int s0/0.3 - 152.52.0.3 /24 p > > int s0/0.4 - 152.52.64.3 /24 m > > int e0/0 - 152.52.2.1 /23 > > int loop0 - 152.52.15.254 /32 > > > > router ospf 500 > > net 152.52.0.0 0.0.15.255 area 0 > > > > router igrp 400 > > redistribute ospf 500 met 100 1 255 1 1500 > > passive-interface Ethernet0/0 > > passive-interface Serial0/0.3 > > passive-interface Loopback0 > > network 152.52.0.0 > > neighbor 152.52.64.4 > > > > Other OSPF routers have various masks for > > interfaces. I understand that > > only /24 networks will redistribute. On ABRs I put > > a statement like: > > area 3 range 152.52.33.0 255.255.255.0 > > This allows the IGRP to get the 33.0 /24 network. > > How do I get the networks 152.52.15.254/32 and > > 152.52.2.0/23 on area 0 to > > redistribute into IGRP? I have tried to add a > > statment like this on the > > redistributing router: > > area 0 range 152.52.15.0 255.255.255.0 > > > > This does not work. > > > > Any ideas? > > > > > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > __ > Do You Yahoo!? > Get email at your own domain with Yahoo! Mail. > http://personal.mail.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP, Static and a Prefix-list
Depending on the requirements: I would use a low MED value to annouce the network out the link you want traffic to come in on and a high MED on the other link for this network. This will accomplish the desired effect of the network being reached through a certain link, as well as provide redundancy incase that link fails. If it fails the higher MED will be the only link available, the network will still be reachable from the world until the prefered link comes back up...and the origianal link will take over again because of the lower MED value. ""Atef Rostom"" <[EMAIL PROTECTED]> wrote in message 94h6j8$4fd$[EMAIL PROTECTED]">news:94h6j8$4fd$[EMAIL PROTECTED]... > Hi All, > > I have a 7206 with 64M RAM (not enough to host all internet routes), I am > running BGP and peering with my upstream ISP's router but filtering all > incoming updates (low memory). > > Should this be any problem ? > > What I think is: I am using a static route to forward upstream traffic to my > provider so I don't need the internet's routing table. I want traffic > destined to a certain network in my AS to reach me through this link so I > will advertise this network only to that neighbor using a prefix-list. > > Please comment > > TIA, Atef > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Raleigh, NC CCIE study group
I would be interested in this group. I have a 2500not sure exactly which onei havnt unboxed it yet (borrowed from a friend)...what good is 1 router to me...anywaysI would be interested. -Jeff ""Black Loughlin"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Is anyone interested in starting or do you know of a CCIE study group in > Raleigh, NC? I am going to take the CCIE written this week and build my own > lab in the near future. I would be interested in working with anyone else > with similar goals. > > Thanks, > > Loughlin Black > > CCNP, CCDP > > [EMAIL PROTECTED] > _ > Get your FREE download of MSN Explorer at http://explorer.msn.com > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ospf over secondary ip address
its my understanding that it is possible, but only if the primary ip is also included in the ospf process. ""Nurarif Wibawa"" <[EMAIL PROTECTED]> wrote in message 01bd01c03f4e$68da4d70$[EMAIL PROTECTED]">news:01bd01c03f4e$68da4d70$[EMAIL PROTECTED]... Is it possible ?
Re: Trunk Load-Balancing
Due to spanning tree, I dont believe you can do it in the fashion you describe. The only way I know to do this is if you have mulitple vlans on the access layer switch, have the port priority or root bridge for x vlans travel on link 1 while port priority or root bridge for y vlans travel link 2. This will actively use both links for traffic, and provide redundancy in case of link failure (spantree is recalculated and all vlans travel available link). Hope this helps. -jm "Alldread AK2 Robert J" <[EMAIL PROTECTED]> wrote in message F387C9D3CA43D31190E80090278A758E51402D@CHPTSE04">news:F387C9D3CA43D31190E80090278A758E51402D@CHPTSE04... > I would like some opinions on load balancing across (2) 6509 switches using > trunk ports. > > Here is the scenario... > > 1 switch at the access layer, 2 switches and the distribution layer. The > access layer switch has a GIG trunk link to each of the 2 dist layer > switches. How would I implement equal-cost load balancing in a round robin > fashion from the access layer switch to each of the 2 dist layer switches. > > I would like to do this on a packet by packet level. CCO has some good tips, > but only for load balancing from 1 switch to 1 switch, not 1 switch to 2 > switches. > > Any advice and help would be greatly appreciated. > > Skin-e > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Trunk Load Balancing
Jims right, due to spanning tree, I dont believe you can do it in the fashion you describe. The only way I know to do this is if you have mulitple vlans on the access layer switch, have the port priority or root bridge for x vlans travel on link 1 while port priority or root bridge for y vlans travel link 2. This will actively use both links for traffic, and provide redundancy in case of link failure (spantree is recalculated and all vlans travel available link). -jm "Alldread AK2 Robert J" <[EMAIL PROTECTED]> wrote in message F387C9D3CA43D31190E80090278A758E514034@CHPTSE04">news:F387C9D3CA43D31190E80090278A758E514034@CHPTSE04... > I would like some opinions on load balancing across (2) 6509 switches using > trunk ports. > > Here is the scenario... > > 1 switch at the access layer, 2 switches and the distribution layer. The > access layer switch has a GIG trunk link to each of the 2 dist layer > switches. How would I implement equal-cost load balancing in a round robin > fashion from the access layer switch to each of the 2 dist layer switches. > > I would like to do this on a packet by packet level. CCO has some good tips, > but only for load balancing from 1 switch to 1 switch, not 1 switch to 2 > switches. > > Any advice and help would be greatly appreciated. > > Skin-e > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How do I save the configuration on a 6506/9 Switch??
It is automatically saved every 30 seconds or so. there is no save command. running is startup on a switch running switch code. -jm ""Rossetti, Stan"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anybody know how to save the configuration on a 6506/9 switch. I have > never used one of these switch before and noticed that there is not a "copy > ru star" command. There is also not a running config that I am able to > find. The only configuration that I can find is the default and non-default > config. > > Thanks, > > Stan Rossetti > > > Russia Services Group > Email: [EMAIL PROTECTED] > Phone: (256) 544-5031 > Beeper: 544-1183 pin # 0112 > > <<...>> > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SNMP Traps
yesthey will both get snmp stats all the time with this. snmp server x.x.x.x snmp server y.y.y.y -jm ""Austin"" <[EMAIL PROTECTED]> wrote in message 8tmhnk$h0$[EMAIL PROTECTED]">news:8tmhnk$h0$[EMAIL PROTECTED]... > Can one configure SNMP trap data to go to 2 different monitoring locations > simultaneously? > If the main NOC is in NYC and the colocation is in San Jose and the main NOC > goes down, can San Jose still get SNMP trap data? > Any references on CCO will be helpful. > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Ping HSRP 224.0.0.2 Strange reply ?
my thoughts on finding the device: 1 sh cdp neigh 2 sh arp - if mac entry is there, trace down device... 3 sniff. -jm "Phil Barker" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > I have 2 Routers connected via 3 Fa/Eth segments. > The segs are configured in an HSRP arrangement. > > I pinged 224.0.0.2 from one Router and got 3 replies > that I expected from the other router PLUS one that I > dont understand. > > This phantom device that replied cannot be telneted > nor tracert' but can be pinged and understands > multicast IP 224.0.0.2 > > To my knowledge there are only these two routers on > this segment. > > ?? > > Any ideas. > > Regards, > > Phil. > > > > Do You Yahoo!? > Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk > or your free @yahoo.ie address at http://mail.yahoo.ie > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OOB
I have used this to establish a ppp connection. interface Asyncxx ip unnumbered Ethernet0/0 ip helper-address x.x.x.x - WINS, DHCP, DNS no ip directed-broadcast encapsulation ppp ip tcp header-compression passive no ip mroute-cache autodetect encapsulation ppp async mode interactive peer default ip address x.x.x.x (address given to calling device, available ip from e0 range above.)) compress mppc ppp authentication chap pap callin line xx autoselect arap autoselect during-login autoselect ppp arap enable modem InOut modem autoconfigure type usr_sportster transport input all stopbits 1 speed 115200 flowcontrol hardware not sure that this will cover your authentication to pop site...but that shouldnt be to hard to add. -jm ""Brandon Peyton"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > I was just wondering if anyone has a sample configuration of what they've > configured on a router... > > I have a 2611 with serial and 2 eths and i wanted to connect and OOB modem > to it to dial up and test etc. > > It will have to authenticate to a pop site so it needs that ability. > > Could someone help? > > Much appreciated > Brandon > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Boson Tests for BSCN
i used boson #2 and 3, did 95% consistently on them and passed BSCN with 850. -jm ""Keith Townsend"" <[EMAIL PROTECTED]> wrote in message 8tpht7$5oo$[EMAIL PROTECTED]">news:8tpht7$5oo$[EMAIL PROTECTED]... > I just brought the Boson tests for the BSCN and took the first test. I did > well considering I still have a bunch of BGP studying to do. The test > seemed kinda easy(or I'm just smarter than I thawt :-O). My question is to > those who have used these tests and taken the BSCN. Are the questions > generally easier on the Boson than on the real exam? If they are > representative of what's on the exam then I'll be placing a call to Sylvan > sooner than I thought. > > Thanks, > > Keith > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Two DLCI numbers?
"jeongwoo park" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all > While I was reading a cisco book, I came across the > fact that DLCI number has only local significance > because there might be more than one DLCI number > associated with one pvc. > Why would any pve in frame relay network have two DLCI > numbers? > I know that DLCI number is given by frame relay > service provider. > Can someone explain this? > > Thanks in adv. > > jeongwoo > > > __ > Do You Yahoo!? > From homework help to love advice, Yahoo! Experts has your answer. > http://experts.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > begin 666 Drawing1_raster.gif M1TE&.#EAG &6`?<``/___P```/___P```/___P```/__ M_P```/___P```/___P```/___P```/__ M_P```/___P```/___P```/___P```/___P`` M`/___P```/___P```/___P```/___P```/__ M_P```/___P```/___P```/___W!P`(6%`)F9`*VM M`,+"`-;6`.OK`/__`/__*?__4O__>O__H___S"(S`#%*`$!@`$]W`%Z.`&ZD M`'V[`(S2`)OH`*K_`+7_(L'_1,S_9M?_B./_JN[_S!$S`!I-`")F`"N `#.9 M`#RS`$3,`$WF`%7_`&C_'7S_.H__5Z/_=;;_DLK_K]W_S `S``!0``!M``"* M``"H``#%``#B``#_`!K_&C/_,TW_36;_9H#_@)G_F;/_L\S_S `S$0!-&@!F M(@" *P"9,P"S/ #,1 #F30#_51W_:#K_?%?_CW7_HY+_MJ__RLS_W0`S(@!* M,0!@0 !W3P".7@"D;@"[?0#2C #HFP#_JB+_M43_P6;_S(C_UZK_X\S_[@`S M,P!-30!F9@" @ "9F0"SLP#,S #FY@#__QW__SK__U?__W7__Y+__Z___\S_ M_P`:,P`H4 `W;0!%B@!4J !BQ0!QX@" _QJ,_S.9_TVF_V:S_X"__YG,_[/9 M_\SF_P``,P``50``=P``F0``NP``W0``_Q<7_RTM_T1$_UM;_W%Q_XB(_Y^? M_[6U_\S,_QH`,R8`33,`9D `@$T`F5D`LV8`S',`YH `_XX=_YTZ_ZM7_[IU M_\B2_]>O_^;,_S,`,TT`368`9H `@)D`F;,`L\P`S.8`YO\`__\=__\Z__]7 M__]U__^2__^O___,_S,`&DT`)F8`,X `0)D`3;,`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`+,V\*5K'EQPD;DJ+*G#JT*,)KH2+VSQ MQ6O=)=>7&IM;4L=G<=RQH2"S&^?(2):,EG8:PZKRRF:U[/++5"4&2'\I*ZQ-%Q@DQE17;?756#,$_A `@0,) M%C1X$&%"A0L9-G3X$&$`B!,I5F0H42!&`!HM3@SP\6/&CB-)EC1Y$F5*E2L] M@G3Y$F9,F3-IUK0IC5[%B37C6B3AN7H4B1$C@GGKL58=Z%$O T# M_"/[5^5>P"1UJK4JF"CBB(-+]F7\&')7Q(H+4C9\$&YDEI8UFW3<&;3;D'3E M/E2<&3+JT*M9MY::EK1IV0I5CZSM&G=NW8QA+Y[--V_OW<.)%Q\NW"#GN,!I M(S>>E^#YH_M\.E9]V#AYS=,E-M]\5#UOZ:.KN M[U:'+]ZV=_3[Z>)/7IJ\X/SC+SL"3=//P 3/NPRZ`)L;<+#;$IR0PJ$67(ZY M#".ZL"(.*_P0Q,9LC2EQ4&UYU M8DDE0I:YR@CB_8GDJOES>:J5S:T M/:T?_AKLL,4>F^RRS7X,_B ``@<2+&CP(,*$"A2+&GR),J4*E>R;.DPP$"8`F'*G [EMAIL PROTECTED]&[+DS(4Z; M/X<2+6KT*%*B(9I6L>2+6L6:]BT M:L&J97KV+=RXVK2M6:%2['^?R[>OWK=[ (=D*_OKW,.+$2@LS?HJW\4:R M.15O_4?Y85.C,DZ9VB: M/&?OYBF2)&G3IU=#5KU:LNN"LGN_9KZ;\^3FRW5']6TRN/##H;,?G%YV>U7P M_MSIEA[/5SS+VD"'LG:>^2KZH_'-,\1.__Y#]1$ASH<:43]^MO47(($%H@2@ M00/B5=]"OU'FH($12I@4@LKQEU^#%6JEX80=>@A?>]U=^%*&(>X$X8>@CHV6&*1YN'&X7;1(;E? M@NR5)Z1I.1;)XY,J+GE;3]19EYQ[,ZDG79=24IF=E2/NF&6*219HWYF8I?GB MFC'F^":81S*XWH5N[CAEG ^VF&>=A?XWJ(2X.4>FB%%)`(0OPDIRFYZ&358X;8(+)SSQ61('7)]^.-T)L;04>VP6N?+N>+"KT7Y\ M\F@AVQ1;;"Y>=Q)TDJ9L,LHUS\BQL_#)I[+-/5NL$LZ"TMRSST-7?!G/1">< M-%J^M7P@A48KW>U33(LL5]!(1C8UL!<=76[!7 OYLU591]FFU6(+*S529I_- MWGEIJXT8V3HK&3?;7K_EERYY47]#73GGW?NJV25NNJ7FRYBL+-' M;'OL6\&>;NR[YRX[[GT%SS?KOZ/E.Z6T_B5YW<8++_KP'9K=O//+IQW]N(;Y MYUKQVD:W;=TN(_RS%L8"B#I2M>^ PN./_;RW,0?&:5H1O-G[/">U!E*P-2W) M(- `Q+[S@;!4'4S48L(7-D+!2X':"B '3ZBXXU%/8#E[H^D5 M;L92FVVA7#6=]DU-\NTY<#,D&R591GBV/'T$R#!"2Y,.1 M`D\"2%DRX4J6+V'&E#GS90$'%ORV+LK!AZ/Z5;R8\53$CR'#+?PTLN#&ES%?KKR9\V3. MEC.'%HWV.*J ME(L[%;ZG61TGU'QYX4>_>U_ZS+]/Z>6[MT[N$-!@"/ON9X MV.6?GV.M"QS]?9+PB\_W@SS3CX"C>IO(I>HDDC!@_X#,"0! M4].ON ./&RFG!.L*2L,.09RLPY,\!/'!].J3T",*3;.0. P9+.Q#@D@\#L$9 M$0S1Q@PY7#!%%3DZL3&QF(*Q(")[(W ZGG9\BK>5EOQ00R'I`_(C*A=#DC\, MIZHM0BN#%$[+H[ ,$\ OP=2H3(BFP\VS`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
Re: Subinterface question
If I understand correctly, both networks on the same router..different subinterfaces. If Im thinking about this correctly, the metric in the routing table will be 0 because they are both directly connected networks. Thoughts from anyone else? -jm ""Jeff Walzer"" <[EMAIL PROTECTED]> wrote in message 005501c047ff$1f8a3e00$[EMAIL PROTECTED]">news:005501c047ff$1f8a3e00$[EMAIL PROTECTED]... > Our internal network has 10 subnets that can be utilitized (10.10.1.x - > 10.10.10.x). The router IP address is 10.10.1.1. > > When I create a subinterface for 10.10.2.1 what is the metric for the > 10.10.2.x subnet to get to the 10.10.1.x subnet? > > Being that it is the same router will it be 1 or does each subinterface > increment the metric by 1 thereby making the metric 2 for each subinterface? > > Thanks, > Jeff > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subinterface question
yea..its the routing mechanism that determines the metric...but (correct me please) dont all routing protocols give a metric of 0 to directly connected networksand therefore, the metric would be 0 in this situation regardless of the routing method selected? ""Howard C. Berkowitz"" <[EMAIL PROTECTED]> wrote in message news:p0500190cb62c956ab24a@[63.216.127.98]... > >If I understand correctly, both networks on the same router..different > >subinterfaces. If Im thinking about this correctly, the metric in the > >routing table will be 0 because they are both directly connected networks. > > > >Thoughts from anyone else? > > > >-jm > > > >""Jeff Walzer"" <[EMAIL PROTECTED]> wrote in message > >005501c047ff$1f8a3e00$[EMAIL PROTECTED]">news:005501c047ff$1f8a3e00$[EMAIL PROTECTED]... > >> Our internal network has 10 subnets that can be utilitized (10.10.1.x - > >> 10.10.10.x). The router IP address is 10.10.1.1. > >> > >> When I create a subinterface for 10.10.2.1 what is the metric for the > >> 10.10.2.x subnet to get to the 10.10.1.x subnet? > >> > >> Being that it is the same router will it be 1 or does each subinterface > >> increment the metric by 1 thereby making the metric 2 for each > >subinterface? > > > > > I'm unclear what you both mean when you speak of metrics. No type of > interface or subinterface inherently has a metric until you define a > routing mechanism with respect to that interface -- and that > mechanism defines the metric. > > So OSPF and EIGRP, in practice, use bandwidth as a metric. RIP uses > hop count, which may be what you are thinking of. > > The zero value for a directly connected network is the administrative > distance, which is different from a metric. Administrative distances > rank preferences among sources of routing information, lower values > being more preferable. For example, an OSPF route with an > administrative distance of 110 will never be preferred to a directly > connected route. A RIP route (to the same destination) will never be > preferred to an OSPF route. > > (note...I'm assuming here that you use the standard route selection > algorithms without overriding anything) > > Metric is used as a tie-breaker between routes of the same > administrative difference. > > Prefix length is considered before administrative distance. A route > of 192.168.0.0/28 from RIP is preferable to any OSPF route to > 192.168.0.0/24. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ospf process id / AS??
If the process id is defined as 200 in the command: router ospf 200 and this is not the AS, then where is the AS defined? -jm _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to verify the CIR from my router?
I believe that encap frame-relay cisco will display CIR from the cloud switch, other encaps will not. ""Jack Walker"" <[EMAIL PROTECTED]> wrote in message 8ucb78$kpr$[EMAIL PROTECTED]">news:8ucb78$kpr$[EMAIL PROTECTED]... > All, > > Just want to ask how I could verfify/display the CIR of my PVC? > > I know we could throw traffic to verify this, but I just got a new PVC on a > production router(we just add a new PVC on our production T1), so I can not > push traffic to the production router just to verify the PVC. Is there any > other ways to verify the CIR? > > Thanks > > Jack > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CID help
Sorry to reask this I know Ive seen it somewhere What would you say is the best study book for DPs CID test? I usually use examcram and boson to prepare after I have studied other materials...something comperable to the examcram in terms of concise prep would be what Im looking for. Any suggestions? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCRAN challenge question for the day
D - layer 3 ... right? ""Sisqo"" <[EMAIL PROTECTED]> wrote in message 8ursff$f0i$[EMAIL PROTECTED]">news:8ursff$f0i$[EMAIL PROTECTED]... > Q.931 > > Is it a layer 2 or layer 3? > Is it B channel or D channel? > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]