Re: Hub to Hub through 2600 [7:16328]
You can't do full on a hub. Put your routers back to half and it will probably work. If not, make sure your workstations didn't auto-screwup and go full as well. Mike Sammi wrote: I have the router interfaces on full/100, perhaps I'll move it to auto, same as the workstations are. I have moved equipment, swapped cables, haven't seen anything suspicous. I lose link lights on the hub and on the router, just doesn't come back soon's I go to the second hub. I'm not at the office, but I don't believe the hub has cachine capability. I will try putting the interfaces into auto tomorrow, thanks all! On 16 Aug 2001 22:18:56 -0400, [EMAIL PROTECTED] (Mark Monica Baker) wrote: Have you tried moving things around to see if the problem follows any piece of equipment? Maybe a bad cable, bad port on hub, or speed/duplex mismatch. Have you tried rebooting router after adding hub? Do you lose link lights on the hub (and if so, is it just where the router plugs in, or on the workstations?) or the router or both? Could the original hub be caching the MAC of the router port that was plugged into it and think it's still on the original port, instead of moved to another hub? Mark -Original Message- From: Sammi [SMTP:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 9:27 PM To: [EMAIL PROTECTED] Subject: Hub to Hub through 2600 [7:16328] Hello, I just received a 2616 router. I set it up through the initial boot screen: SubA - 0/0 10.100.1.1 /16 SubB - 0/1 10.200.1.1 /16 Everything works fine if both interfaces are connected, via straight cable, to a 3Com 10/100 hub. Can ping either interface from either subnet, all machines on each subnet can ping any machine on other subnet. However, when I try to go with two hubs, one for each subnet, I can no longer communicate. Have assured I'm not on uplink, have tried uplink, am sure no problems with hub (new out of box, and working in other configs). If I have both Subs hooked up to one hub, all link lights are green. If I move one of the interfaces to the other hub, no link light. Am I missing something? I'm sure it's something simple but heck if I know. Any help greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16538t=16328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Fob ??? [7:16224]
The Key Fob version of the Secure ID stuff is a little token card that goes on your keychain. The little strip of leather that's on your keychain? It's a Fob. If it's not leather, it may take the shape of a beer bottle opener. -me Art Barrera wrote: All, Working with Secure ID Service and was wondering - Does Fob in Key Fob stand for anything when referencing a Token? Weird word/acronym (it)... Thanks, Art Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16539t=16224 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ip default-network [7:16535]
All routes that match the default network will get tagged as default candidates. As with most routing decisions, the best route wins and gets set as the gateway of last resort. If that entry goes away, the second one takes it place, and so forth, until you are out of default candidates. -me Vijendra Jaiswal wrote: Can anyone pls tell me on what basis the entry of one of the default-network given in the configuration , is made in the routing table . For e.g : The router is having 03 upstream providers with OSPF and BGP running Provider 1) Default network: 10.0.0.0 Deault network :192.181.35.0 Default network: 192.140.0.0 Provider 2) Default network 204.45.56.0 Provider 2) Default network 209.10.70.0 All the above entries are made in the routing table using the ip default-network command. Hence the router is having 05 default network in the routing table. Pls help me in letting me know of the above 05 default network given , which one of them will be listed in the routing table as gateway of last resort when one sees using the command show ip route . And pls tell me on what basis the particular network will be choosen as gateway of last resort Hoping that you will help me in solving this mystry for meThanks. Vijendra Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16541t=16535 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ip default-network [7:16507]
It's not dynamic. I can't ship that router out with the same config to anyplace in the world. Using a default network, you can. It will come up, peer, get it's routing table, and send it's default stuff towards home. Let's say for instance that you have a large core network. You want all traffic that isn't in the routing table to not go to Null0, but you want it to flow down to this core and let the core deal with it. You may want this for a number of reasons, most obviously if you default route to the Internet, but also if you are running multiple routing protocols and not redistributing between all of them. You can then set a loopback on all the core routers on say '192.168.200.0' network. Then on all your routers you deply, you set the ip default-network to 192.168.200.0. Now no matter where you drop that router, if it's got a routing table, and that table knows at least one person that can get to 192.168.200.0, then you're set. No more configuration. Let's also say that edge router has an isdn dial backup. If your primary goes down, and the other comes up, when the new routes flow in, it will take the new interface with the new next hop to the core automatically - no route changes. The new routes will just get tagged as default candidates and away it goes. -me Rick Foster wrote: How is this different from configuring two different default routes for the same network e.g. ip route 10.0.0.0 255.0.0.0 202.33.22.11 ip route 10.0.0.0 255.0.0.0 203.44.33.22 ip route 10.0.0.0 255.0.0.0 204.55.44.33 Regards ... Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16574t=16507 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: voice lab [7:16561]
Depends on what type of Voice over IP you want to do. If you just want to do an h323 gateway, you will need to have at least a 2600 with a VIC module and various cards to go in it. FXO will go towards the CO on a regular dialin line. You can then write some rules to allow something like netmeeting to dial out on that phone line. If you want to simulate a phone switch, you'll need an FXS. You can then plug a regular phone into the FXS port, the telco into the FXO and setup some call routing. Again, you could setup H323 to allow netmeeting to call that phone, or for that phone to call netmeeting. If you've got a real PBX to work with, you'll need either a EM card or a voice PRI card. EM will give you dial ports that you can configure, however, you won't be able to pass the call information across that you can with a PRI. -me george gittins wrote: any pointers has for what type of hardware would i need to make voice over ip lab? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16575t=16561 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ip default-network [7:16535]
You can't answer the question with the information you gave. You just say that there are three upstream providers with OSPF and BGP. You don't say which routes come over which and what their weights are. Just check your routing table. Whatever path has the best routes to one of the networks you specified will become the gateway of last resort. As for their precidence, I don't know. As with most things cisco, it could either be the order that they are in the config script, top down, or the order of their sorted queue. So it may go through all of the best 10 routes before the best 192 routes. That's something to put into lab. Usually, you only have one default network. The only case I can think of that you might have more is if you want everything to flow to data center A if there isn't a route unless data center A gets hit by a large falling rock, then transfer all the default traffic to data center B. To have more than one increases complexity, and with complexity comes failure. Mike Vijendra Jaiswal wrote: My query is still unanswered !! As Michael worte the best route wins and gets set as the gateway of last resort Of the example i wrote abt how does one which route will be the gateway of last resort . Vijendra. Michael R. Eckhoff wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... All routes that match the default network will get tagged as default candidates. As with most routing decisions, the best route wins and gets set as the gateway of last resort. If that entry goes away, the second one takes it place, and so forth, until you are out of default candidates. -me Vijendra Jaiswal wrote: Can anyone pls tell me on what basis the entry of one of the default-network given in the configuration , is made in the routing table . For e.g : The router is having 03 upstream providers with OSPF and BGP running Provider 1) Default network: 10.0.0.0 Deault network :192.181.35.0 Default network: 192.140.0.0 Provider 2) Default network 204.45.56.0 Provider 2) Default network 209.10.70.0 All the above entries are made in the routing table using the ip default-network command. Hence the router is having 05 default network in the routing table. Pls help me in letting me know of the above 05 default network given , which one of them will be listed in the routing table as gateway of last resort when one sees using the command show ip route . And pls tell me on what basis the particular network will be choosen as gateway of last resort Hoping that you will help me in solving this mystry for meThanks. Vijendra Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16577t=16535 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Why Should the Binary Math Method Be Used to Subnet [7:15354]
The binary method is nice because it is what the router does. In addition, in the process, you get out a lot more information. For instance, you can quickly determine the class without having to memorize all of the ranges with the following binary patterns: Class A: 0 [0-127] Class B: 10[128-191] Class C: 110 [192-223] Class D: 1110 [224-239] Class E: [240-255] Not to mention, as you run the bits you can see exactly what is happening. Granted, there are still tricks. For instance, the following table helps calculate things quickly: 128 64 32 16 8 4 2 1 128 192 224 240 248 252 254 255 Notice that it's just the bit values across the top, and the sum of the bit values across the bottom. So if you write that out, you can find out exactly what your masks are and the bit patterns that go with them without any tricks. Mike Priscilla Oppenheimer wrote: Well, I have to admit to never really understanding the shortcuts that I have seen people use. ;-) I guess I'm brain damaged, but I have to do it in binary. As far as tools are concerned, I totally agree with the person who pointed out that in design meetings, you often don't have any tool handy except your head. Sure, you may have an IP subnet calculator on your Palm, but the client is going to look at you askance as you bury your head in the itty-bitty screen, trying to use that silly stylus thing or Graffiti, giving them no eye contact the whole time you're puttering with the tool. Use your head and look professional and like you're worth the big bucks that they are paying you. Priscilla At 03:52 PM 8/8/01, Debbie Becker wrote: I use decimal shortcuts most of the time as well -- but when I run across something confusing, I'll go back to binary -- it always shows me the way . . . Deb John Neiberger wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... | I disagree wholeheartedly with one of those statements. In this | business you never really arrive in the first place, so the journey | itself is as important or more important than the destination. You | learn binary subnetting techniques for the same reason students learn | math without calculators. It's important that you really understand what | is occurring if you want to be a good engineer. | | Liken this situation to cars. If you just want to use the tools | without understanding, then you are a driver only. If you want to be a | mechanic and know what's happening under the hood, then you have to | learn the stuff the hard way. | | Back to reality for a bit. As far as subnetting is concerned, it's | very difficult to understand what's happening without learning it in | binary. Once you've learned it, though, it's not really necessary to do | it in binary because you'll have plenty of shortcuts in your head that | bypass--yet still rely on--the binary math you learned previously. | | Just my $.02... | | John | | Ken 8/8/01 10:29:45 AM | This is a study group so I have a question for which I need some | education. | I am not looking for a flame war, just education. The question I have | is of | what use is the binary math method of subnetting as compared to just | using a | program that does subnetting? If the point to the exercise is to | produce a | plan for subnetting that can then be entered into each device on the | network | or into a DHCP server setup, what else is achieved by doing this | manually? | It seems to me that the point is not the journey, but the arrival at | the | destination. Indeed arrival as quickly as possible, with the least | source of | error. As Cisco even says; The purpose of this tool is to provide a | way to | calculate IP subnetting which is fast, easy, and error free. Doing | such | calculations manually is time consuming and susceptible to common | mathematical mistakes, especially in conversions between binary and | decimal | numbers. So what is it I am not understanding? | | | | | Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15354t=15354 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: High CPU Utilization (Sh process cpu) [7:15272]
I don't see anything extremely wrong here. Note that 51% of your CPU is being spent in interrupts. Which means you're fast switching and everything is going well. There is obviously just a lot of traffic going on here that it has to deal with. Now if it said something like 99%/1%, I would be a little concerned. Mike Nabil Fares wrote: Hello John, Here's the sh process cpu output, hope you guys see something am missing. Thanks.Nabil sh process cpu CPU utilization for five seconds: 54%/51%; one minute: 61%; five minutes: 60% PID Runtime(ms) Invoked uSecs5Sec 1Min 5Min TTY Process 1 22284668636 33 0.00% 0.00% 0.00% 0 Load Meter 2 500372 3701300135 0.08% 0.01% 0.00% 0 OSPF Hello 3 4834472465863 10377 0.00% 0.09% 0.10% 0 Check heaps 4 0 2 0 0.00% 0.00% 0.00% 0 Pool Manager 5 0 2 0 0.00% 0.00% 0.00% 0 Timers 6 4027 1481 0.00% 0.00% 0.00% 0 Serial Backgroun 74848 5 969600 0.00% 0.00% 0.00% 0 OIR Handler 8 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 9 29096 3340799 8 0.00% 0.00% 0.00% 0 IPC Periodic Tim 10 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 11 2664724 1403918 1898 0.24% 0.10% 0.08% 0 ARP Input 12 58956682326 86 0.00% 0.00% 0.00% 0 HC Counter Timer 13 0 3 0 0.00% 0.00% 0.00% 0 DDR Timers 14 0 1 0 0.00% 0.00% 0.00% 0 Entity MIB API 15 4 1 4000 0.00% 0.00% 0.00% 0 SERIAL A'detect 16486445 108088 0.00% 0.00% 0.00% 0 Microcode Loader 17 0 1 0 0.00% 0.00% 0.00% 0 IP Crashinfo Inp 18 0 1 0 0.00% 0.00% 0.00% 0 DSX3MIB ll handl 19 24 3340798 33 0.00% 0.00% 0.00% 0 RSP Background 202284 55687 41 0.00% 0.00% 0.00% 0 Slave Time 21 0 1 0 0.00% 0.00% 0.00% 0 Slave IPC OIR --More-- PID Runtime(ms) Invoked uSecs5Sec 1Min 5Min TTY Process 22 720 115 6260 0.00% 0.12% 0.06% 2 Virtual Exec 23 37400946486 39 0.00% 0.00% 0.00% 0 Chassis Daemon 244372 55688 78 0.00% 0.00% 0.00% 0 RSP Chassis Back 25 0 1 0 0.00% 0.00% 0.00% 0 MIP Mailbox 26 0 1 0 0.00% 0.00% 0.00% 0 CT3 Mailbox 28 33076 3340800 9 0.00% 0.00% 0.00% 0 TRIP Background 2910446076 9973434 1047 0.40% 0.34% 0.28% 0 IP Input 30 378200675047560 0.08% 0.01% 0.00% 0 CDP Protocol 31 0 1 0 0.00% 0.00% 0.00% 0 PPP IP Add Route 32 404 5546 72 0.00% 0.00% 0.00% 0 MOP Protocols 33 0 1 0 0.00% 0.00% 0.00% 0 X.25 Encaps Mana 34 0 2 0 0.00% 0.00% 0.00% 0 SSCOP Input 35 0 2 0 0.00% 0.00% 0.00% 0 SSCOP Output 369148 55689164 0.00% 0.00% 0.00% 0 SSCOP Timer 37 206084 60429 3410 0.00% 0.01% 0.00% 0 IP Background 38 0 2 0 0.00% 0.00% 0.00% 0 ILMI Input 39 0 1 0 0.00% 0.00% 0.00% 0 SNMP Timers 40 0 2 0 0.00% 0.00% 0.00% 0 ILMI Request 41 0 2 0 0.00% 0.00% 0.00% 0 ILMI Response 42 0 1 0 0.00% 0.00% 0.00% 0 ILMI Timer Proce 43 8 2 4000 0.00% 0.00% 0.00% 0 ATM PVC Discover 44 0 2 0 0.00% 0.00% 0.00% 0 ATMSIG DRIVERAPI --More-- PID Runtime(ms) Invoked uSecs5Sec 1Min 5Min TTY Process 45 424 3662115 0.00% 0.00% 0.00% 0 TCP Timer 46 396 231 1714 0.00% 0.00% 0.00% 0 TCP Protocols 47 0 1 0 0.00% 0.00% 0.00% 0 Probe Input 48 0 2 0 0.00% 0.00% 0.00% 0 RARP Input 49 332896103557 3214 0.00% 0.00% 0.00% 0 BOOTP Server 50 172736 55687 3101 0.00% 0.00% 0.00% 0 IP Cache Ager 51 0 1 0 0.00% 0.00% 0.00% 0 PAD InCall 52 0 2 0 0.00% 0.00% 0.00% 0 X.25 Background 53 0 1 0 0.00% 0.00% 0.00% 0 Socket Timers 545728 55688102 0.00% 0.00% 0.00% 0 TCP Intercept Ti 55 0 2 0 0.00% 0.00% 0.00% 0 SPX Input 56 256944 62858 4087 0.00% 0.01% 0.00% 0 Adj Manager 57 8823612 4394985 2007 0.32% 0.38% 0.37% 0 CEF process
Re: Fw: DE bits [7:15210]
Yes, DE bits will stay on as it traverses the frame network. With DE set, any switch along the path that has congestion will toss you out before one without DE set. If you are running a CIR of 0 (as with most Sprint frame circuits), you always run the risk of having to retransmit. However, they supposedly design their frame network so that you never have to. Mike Mike Mandulak wrote: - Original Message - From: Mike Mandulak To: Tony Medeiros Sent: Wednesday, August 08, 2001 6:42 AM Subject: Re: DE bits [7:15210] Sort of... That's the way that I understood it to work. The LMI type is set to Cisco and when I issue the show frame-relay pvc command, the IOS report the cir as being set to 0. On of my other Internet connections through a different provider (also non-channelized T1) the cir is reported as being 768 which is what I would expect. - Original Message - From: Tony Medeiros To: Sent: Wednesday, August 08, 2001 1:14 AM Subject: Re: DE bits [7:15210] A Cisco router will never set the DE bits unless specifically told to do so with a frame relay DE list. The frame cloud sets the DE bit on your traffic if you exceed the CIR or burst committed data rate for your PVC. This means that if the cloud experiences congestion, the frames with the DE bits are the first into the bit bucket. Theoretically this is the way it's supposed to work. More times than not the frame cloud will mark your frames DE even if you not exceed you SLA. Then it's time to call the provider. Generally, DE bits have nothing to do with port speed. Port speed is just the speed of the link you have to the frame switch. Traffic shaping has more effect on the rate you send to each PVC. It's a little complicated. An easy way to show what the provider is giving you is to set up the traffic shaping to correspond to the SLA for the PVC. Then do a sho frame PVC to see the stats. DE marked frames and BECN's and FECN's, MAY be an indicator that you are not getting the SLA you should. These parameters are CRITICAL in voice over data applications. Does this help at all ?? Tony M. #6172 - Original Message - From: Mike Mandulak To: Sent: Tuesday, August 07, 2001 9:16 PM Subject: DE bits [7:15210] Do discard Eligible bits (DE) get set on lines that are full T1's? The circuit I'm looking at is a full T1 to one of my internet providers and when looking at the frame stats (using cisco LMI) I see that that the cir is set to zero which would mean that all frames leave my site with the DE bit set. Am I misunderstanding this? MikeM Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15360t=15210 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: What is the quickest way to reload a router? [7:15247]
No, that will just append nothing to the currently running config. No different than copy tftp run. Mike Harrison, Michael wrote: I cannot test this yet (I will tonight) but I would try the following: Enter setup mode; escape from setup; save config. That should completely overwrite the current config without reloading. -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 08, 2001 8:02 AM To: [EMAIL PROTECTED] Subject: What is the quickest way to reload a router? [7:15247] Hello group, A quick question. What is the quickest way to reload a router to it's default config. I use erase nvram and then reload. Is there a way of doing this without doing the reload which can take a long while. Thanks Albert _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate companies are not responsible for errors or omissions in this e-mail message. Any personal comments made in this e-mail do not reflect the views of Blue Cross Blue Shield of Florida, Inc. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15357t=15247 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: TCP/IP [7:15213]
Not quite true. TCP/IP CAN be done in silicon. However, it's not a good idea to do this. The reason being is that if you have a bug in your stack, you gotta toss the whole card. These are called Layer 3 network cards, and are being used in some cases to speed up some server stuff. Generally, however, I think they're a crock and not worth it. TCP isn't THAT much overhead. Mike Donald B Johnson jr wrote: Why - It is called software because it is. Explain - Cause you can't carry it in a bag like a piece of hardware. Think of how light your carry-on at the airport would be, if all you had in there was TCP/IP. - Original Message - From: To: Sent: Tuesday, August 07, 2001 9:45 PM Subject: TCP/IP [7:15213] Dear all Pls tell me Why TCP/IP is call software and explain Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15362t=15213 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cat 6.5K error messages [7:15241]
I agree, unless it's doing this over and over and over and over again, it's perfectly normal. Or, if you see an entire card drop and come back - then you have a problem. You'll usually see other errors in 'show mac' if there is a duplex problem. Clear that ports stats and take a look at show mac. If errors are a ris'n, then look into problems. Mike Murphy, Brian J SITI-ISET-31 wrote: Patrick, This just means that the port lost a connection to the end device, it's possible that its cause by a pc being rebooted, unlikely a duplex mismatch, or config, could be NIC or cable. Best thing is to set it to auto and see what happens, remember if you have one side auto and the other hard coded then the auto will ALWAYS be half-duplex. Brian -Original Message- From: Patrick Donlon [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 08, 2001 1:33 PM To: [EMAIL PROTECTED] Subject: Cat 6.5K error messages [7:15241] I have a cat' that is giving me these messages on the console: 06:02:18 MET +02:00 %PAGP-5-PORTFROMSTP:Port 8/48 left bridge port 8/48 06:02:35 MET +02:00 %PAGP-5-PORTTOSTP:Port 8/48 joined bridge port 8/48. From the CCO I've read that it could be a duplex mis-match, faulty NIC, cable or mis-configuration. How can I find out from the switch stat's which is most likely? cheers Pat Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15361t=15241 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: IP address space allocation management [7:15130]
How big is your enterprise? Lucent QIP is what I see most in large enterprises. It has it's issues, but it's all around a very good product. If you do go with something like QIP, it will provide DHCP, Dynamic DNS, inventory (if you get that far into it), and a lot more. Mike Jnickys wrote: Hi, I am looking for IP Address space Administration Tools. I would appreciate if anyone with personal experience of such tools could provide info on where I can get them. Thanks J Nickys Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15365t=15130 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: urgent problem [7:14942]
Yeah - I've had a similar problem with a 3640 running 11.x code. Up it to 12.0.18 if you can and it should go away. Mine has been rock solid ever since. Other things I noticed, besides the intermitant connectivity, would be that the whole box would hang while you were on it for periods of time. Then it come back like nothing ever happened. All related to memory allocation. Mike Mohammed Saro wrote: i have router 3640 with 12m processorr memory and 4M I/o memory running ospf process suddenly i can not telnet soemtimes it works sometimes not and when i log to console i find that there is a problem in its memory allocation here are some show comands it might help please advice as soon as possible i want to know is it bug in IOS or memory leakage or harware failure %SYS-2-MALLOCFAIL:memory allocation of 128975 bytes failed from 0x601451F8, pool processor alignment 0 %Low-on-Memory R002#sh ver Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 11.2(7a)P, SHARED PLATFORM, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Wed 02-Jul-97 07:24 by ccai Image text-base: 0x600088E0, data-base: 0x6044 ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT RELEASE SOFTWARE (fc2) R002 uptime is 1 hour, 7 minutes System restarted by power-on System image file is flash:c3640-i-mz.112-7a.P, booted via flash cisco 3640 (R4700) processor (revision 0x00) with 12288K/4096K bytes of memory. Processor board ID 05691894 R4700 processor, Implementation 33, Revision 1.0 Channelized E1, Version 1.0. Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Primary Rate ISDN software, Version 1.0. 2 Ethernet/IEEE 802.3 interface(s) 8 Serial network interface(s) 16 Low-speed serial(sync/async) network interface(s) 1 Channelized E1/PRI port(s) DRAM configuration is 64 bits wide with parity disabled. 125K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R002#sh processes memory Total: 5984448, Used: 5887396, Free: 97052 PID TTY Allocated FreedHoldingGetbufsRetbufs Process 00 194856 12362121464 0 0 *Init* 00288 300560288 0 0 *Sched* 0062287161719112 14224 297060 0 *Dead* 10256256 3772 0 0 Load Meter 20 1216 80760 7804 0 0 OSPF Hello 30 0 0 6772 0 0 Check heaps 40 73128 0 49660 25736 0 Pool Manager 50256256 6772 0 0 Timers 60172 4068 6944 0 0 ARP Input 70 92 0 6864 0 0 SERIAL A'dete 80256256 6772 0 0 Environmental tatus checker 90 0 0 6772 0 0 SYNCD2430 Hel r 100 26652 3632 24896 0 0 Framer backgr nd 110 43720724 498283114308780 0 IP Input 120 86680 78880 14572 0 0 CDP Protocol 130 0 0 6772 0 0 Asy FS Helper 140 0 19428 6772 0 0 TCP Timer 150 358116 29920 15752 0 0 TCP Protocols 160232 0 7004 0 0 Probe Input 170 92 0 6864 0 0 RARP Input 180 6752 5752 7772 0 0 BOOTP Server 190 4028 11800 12172 0 0 IP Background 220 21500 0 8556 2268 0 Net Background 230348256 12864 0 0 Logger 240 13172256 6772 0 0 TTY Background 250 0820 6772 0 0 Per-Second Jobs 260 31472 31472 7140 0 0 Net Periodic 270184 0 6956 0 0 Net Input 280256256 3772 0 0 Compute load av gs 290 0 0 6772 0 0 Per-minute Jobs 300384256 12900 0 0 HyBridge Input 310584292 7064 0 0 CCP manager 320972256 13488 0 0 PPP manager 330488256 7004 0 0 Multilink PPP 340512256
Re: urgent problem [7:14942]
Generaly, memory leaks are not hardware related. They're code related. Either way, the only real way of isolating them is process of elimination. Which means, turn down extra services, update OS, etc. Since I doubt you can turn down any extra services without impacting your users, upgrading to see if it goes away is the next simplest without impacting everyone (other than for the reload of course). You could also just search CCO or call TAC and see if there is a known issue with that revision of code as well. Mike Mohammed Saro wrote: yeah but i want urgent solution i do not have enough fash or RAM to upgrade IOS and i'm suspecting a hardware failure so how can i know is it hardware failure or just software hangs Best Regards, Mohammed Saro Network Engineer - Original Message - From: Michael R. Eckhoff To: Sent: Sunday, August 05, 2001 2:39 PM Subject: Re: urgent problem [7:14942] Yeah - I've had a similar problem with a 3640 running 11.x code. Up it to 12.0.18 if you can and it should go away. Mine has been rock solid ever since. Other things I noticed, besides the intermitant connectivity, would be that the whole box would hang while you were on it for periods of time. Then it come back like nothing ever happened. All related to memory allocation. Mike Mohammed Saro wrote: i have router 3640 with 12m processorr memory and 4M I/o memory running ospf process suddenly i can not telnet soemtimes it works sometimes not and when i log to console i find that there is a problem in its memory allocation here are some show comands it might help please advice as soon as possible i want to know is it bug in IOS or memory leakage or harware failure %SYS-2-MALLOCFAIL:memory allocation of 128975 bytes failed from 0x601451F8, pool processor alignment 0 %Low-on-Memory R002#sh ver Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 11.2(7a)P, SHARED PLATFORM, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Wed 02-Jul-97 07:24 by ccai Image text-base: 0x600088E0, data-base: 0x6044 ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT RELEASE SOFTWARE (fc2) R002 uptime is 1 hour, 7 minutes System restarted by power-on System image file is flash:c3640-i-mz.112-7a.P, booted via flash cisco 3640 (R4700) processor (revision 0x00) with 12288K/4096K bytes of memory. Processor board ID 05691894 R4700 processor, Implementation 33, Revision 1.0 Channelized E1, Version 1.0. Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Primary Rate ISDN software, Version 1.0. 2 Ethernet/IEEE 802.3 interface(s) 8 Serial network interface(s) 16 Low-speed serial(sync/async) network interface(s) 1 Channelized E1/PRI port(s) DRAM configuration is 64 bits wide with parity disabled. 125K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 R002#sh processes memory Total: 5984448, Used: 5887396, Free: 97052 PID TTY Allocated FreedHoldingGetbufsRetbufs Process 00 194856 12362121464 0 0 *Init* 00288 300560288 0 0 *Sched* 0062287161719112 14224 297060 0 *Dead* 10256256 3772 0 0 Load Meter 20 1216 80760 7804 0 0 OSPF Hello 30 0 0 6772 0 0 Check heaps 40 73128 0 49660 25736 0 Pool Manager 50256256 6772 0 0 Timers 60172 4068 6944 0 0 ARP Input 70 92 0 6864 0 0 SERIAL A'dete 80256256 6772 0 0 Environmental tatus checker 90 0 0 6772 0 0 SYNCD2430 Hel r 100 26652 3632 24896 0 0 Framer backgr nd 110 43720724 498283114308780 0 IP Input 120 86680 78880 14572 0 0 CDP Protocol 130 0 0 6772 0 0 Asy FS Helper 140 0 19428 6772 0 0 TCP Timer 150 358116 29920 15752 0 0 TCP Protocols 160232 0 7004 0 0 Probe Input 170 92 0 6864 0 0 RARP Input 180 6752 5752 7772 0 0 BOOTP Server 190 4028 11800 12172 0 0 IP Background 220 21500 0 8556 2268 0 Net Background 230