RE: Configuring CCS or CAS on Router serial interface [7:72309]
Bruce, We're taking about same things. My router has a serial interface connected to an Frame relay E1 link to a V.35/G.703 paradynne converter and the G.703 E1 link terminated on FRSM Card in Cisco MGX 8850the line config from the FRSM need to be configured as CCS or CAS,so I need to adjust the config of serial I/F to support CAS/CCS. Regards, Komy -Original Message- From: Bruce Enders [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 15, 2003 10:25 PM To: Mohamed El Komy Cc: [EMAIL PROTECTED] Subject: Re: Configuring CCS or CAS on Router serial interface [7:72309] Komy, Both CAS and CCS refer to signaling methods used in the channelized T-1 world. Until your Serial interface is connected to a CSU/DSU it is not a channelized interface. So first I have to ask for your definition of CAS and CCS just to make sure we are talking about the same things. Bruce Mohamed Elkomy wrote: Hi all, Can I configure CCS/CAS on Router serial interface...I've a cisco router with V.35 serial interface that's connected to a V.35/G.703 converter and then connected to a G.703 E1 port of FRSM Card in MGX 8850. Everything go well when I confgiure the FRSM port as clear and E1 become up but when i configure it as CAS/CCS ...it come down. So is there anyway to Configure CCS or CAS on Router serial interface. Regards, Komy -- Bruce Enders Chesapeake Netcraftsmen, LLC Cell 443-994-0678 1290 Bay Dale Drive #312 HO 410-280-6927 Arnold, MD 21012 efax 443-331-0651 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=72378t=72309 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Took the MPLS exam and flunked [7:47830]
The best preparation for this exam is the Cisco training material for Implementing Cisco MPLS (v1.0)...it was 3 volumes and nothing in the exam was outside the material. wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi Group, Today I took the MPLS exam and I flunked.I used the book MPLS and VPN architecture(First edition) by Ivan Pepelnjak.From my experience this book is not sufficient to prepare for the exam.About the exam it is not too toughf, if proper material would have been there. The passing mark is also too high,it is 867.I scored 798.. If any knows some good links for preparing for the exam.Pls suggest. Kind Regards /Thangavel 186K Reading,Brkshire Direct No -0118 9064259 Mobile No -07796292416 Post code: RG16LH www.186k.co.uk -- The greatest glory in living lies not in never falling, but in rising every time we fall . -- Nelson Mandela ** This e-mail is from 186k Ltd and is intended only for the addressee named above. As this e-mail may contain confidential or priveleged information, if you are not the named addressee or the person responsible for delivering the message to the named addressee, please advise the sender by return e-mail. The contents should not be disclosed to any other person nor copies taken. 186k Ltd is a Lattice Group company, registered in England Wales No. 3751494 Registered Office 130 Jermyn Street London SW1Y 4UR ** Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=48089t=47830 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE communication and services [7:43714]
I need first to pass the written exam before shceduling any lab exams..anyone can advise for the CS written exam...is it difficut I know that any exam is 50% general knowledge and 50% specialization...has anyone done it before to tell me what to read and which books to study CiscoB wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Cool, I didnt know the ISP Dial qualification exam applied to the CS lab exam. I'll have to schedule the CS lab exam then. Anyone else taking it? thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) nrf wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Allright. Sean Knox has pretty much nailed it on the head. But let me try one more time. To become a R/S CCIE you must #1) pass the R/S written #2) pass the R/S lab To become a Security CCIE you must #1)pass the Security written #2) pass the Security lab To become a C/S CCIE you must #1)Pass one of 8 possible C/S writtens - or - have passed either the old ISPDial or WAN-switching CCIE writtens back when they were still available (so if you have never done this, then unless you have a time machine, you cannot do it now) #2)Pass the C/S lab. Bottom line - the labs are absolutely NOT the same for all three, believe me. I've tried all 3 labs, and they are significantly different. There are some base-level similarities, but beyond that they are quite divergent. If you don't believe me, read their descriptions: http://www.cisco.com/warp/public/625/ccie/certifications/services.html#4 http://www.cisco.com/warp/public/625/ccie/certifications/routing.html#4 http://www.cisco.com/warp/public/625/ccie/certifications/security.html#4 Sean Knox wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... The lab is not the same for all three. As nrf has repeatedly tried to tell you, they are three SEPARATE tracks. To achieve the R/S CCIE, you need to pass the R/S written and the R/S CCIE Lab. To get your C/S CCIE, even if you already have, say, you R/S CCIE *completed*, you still need to complete the C/S written then take the C/S lab. Sean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, May 10, 2002 5:07 AM To: [EMAIL PROTECTED] Subject: Re: CCIE communication and services [7:43714] Sorry, I guess that wasn't very clear. Suppose you attain an R/S CCIE and now wish to go for security or C/S. As the lab is the same for all three, is it necessary to keep retaking the lab or will the written be enough? I assume you probably do have to take the lab again, however since it is the same test you have already passed,it just seems redundant. nrf wrote: Uh, what? I don't understand your question. If you're saying that you're thinking that you can just keep getting more than one C/S CCIE by taking that lab over and over again (but by passing different C/S writtens), then the answer is absolutely not. Contrary to what many people believe, there are no different 'flavors' of the C/S. There is only 1 C/S CCIE, and you're either a C/S CCIE or you're not. And really, this makes perfect sense, since there is only one unified C/S lab which every C/S candidate takes, no matter which written he/she passed. Jason Owens wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Based on your post above, as the lab is the same general knowledge, would you need to keep taking it, providing you have passed it once, to get more than one CCIE? Or would the various written exams suffice? Just curious. [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43971t=43714 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
question on MGX 8250 [7:40308]
Hi all, I've 2 questions on the CESM card of the MGX 8250: 1- what's the differenece bet basic and CCS signaling on the CESM E1 line? 2- Can CAS and CCS ports supported an the same CESM E1 line ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=40308t=40308 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MGX 8250 [7:39022]
hi all, i've a question concerning redundancy in MGX 8250.I know that the SRM card is essential for redundancy but i've the following case: I've 1:1 redundancy in some cardsthe main and redundant cared will be connected together via a Y cable...does that mean i also need the SRM card to support redundancy or the y cable just enough to make the redundant card take over when the primarcy card fails?? BR, Komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=39022t=39022 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cisco cpe 828 [7:37261]
Does Cisco Router 828 support BGP ?? and if yes which IOS image support the BGP config?? BR, Komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37261t=37261 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IOS supporting NAT [7:34252]
Dear all, I've a customer having a 1601 router, IOS ver 11.1, 2 MB DRAM and 4 MB Flash. For this customer i need to upgrade the IOS to support NAT without upgrading the existing flash and DRAM. Is this possible??? and if possible...what's the suggested IOS version to upgrade for??? plz advise. BR, Komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34252t=34252 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NAT problem on AS 5400 [7:32799]
hi all, NAT doesn't work on my AS 5400IOS version is 12.1(5) T5 .are there any problems with the IOS version??? plz advise. komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32799t=32799 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: NAT Problems with 12.2(5)? RE: Gawd I hate my [7:32357]
On my AS 5400, NAT doesn't work .the IOS version is 12.1 (5) T5does this IOS version have same problems with NAT like IOS 12.2(5). plz advise komy Kaminski, Shawn G wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... In case anybody is interested, I submitted the post below regarding NAT problems with IOS 12.2(5). The Cisco TAC engineer wrote back with the following information, which matches up with the problems we were having: A search was done on the known issues on 12.2 IOS platform and I got two bugs similar to your issue. I am just wondering whether you are running into these issues. CSCdv40492 - NAT stops working after some days and the same is duplicated by the following bug also: CSCdr69168 - It seems that router using same port number 65535. After that, some connections will be down or fail. Workaround is to reload the router. If they try to do clear ip nat trans *, it still has this problem. The above two bugs are resolved in the following IOS versions. 12.2(06.06)T 12.2(06.08)DA 12.2(06.06)PI 12.002(006.005) I would suggest you to consult with your NSA engineer for your account for appropriate code recommendation. Shawn K. -Original Message- From: Kaminski, Shawn G [mailto:[EMAIL PROTECTED]] Sent: Monday, January 14, 2002 3:33 PM To: [EMAIL PROTECTED] Subject: NAT Problems with 12.2(5)? RE: Gawd I hate my life [7:31883] Regarding IOS's, has anyone had any problems with NAT when using 12.2(5)? Without going into details, we're having some NAT issues and it seems to have started after upgrading our routers to 12.2(5). CCO doesn't currently show any NAT problems or bugs with this version. Shawn K. -Original Message- From: Brad Ellis [mailto:[EMAIL PROTECTED]] Sent: Monday, January 14, 2002 11:29 AM To: [EMAIL PROTECTED] Subject: Re: Gawd I hate my life ;-gt; [7:31817] snip Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-JS56I-M), Version 12.1(5)T10, RELEASE SOFTWARE (f snip dont use IOS 12.(5)T10. you folks you should be using 12.(5)T9, it has less bugs in it. thanks, -Brad Ellis CCIE#5796 (RS / Security) Network Learning Inc [EMAIL PROTECTED] used Cisco gear: www.optsys.net CCIE Labs, racks, and classes: http://www.ccbootcamp.com/quicklinks.html Chuck Larrieu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... OK, so I've been doing rack testing for some people who are going to be going public Real Soon Now. Got some things mocked up. Some of which relate to topics discussed on this forum yesterday and today. I need to check something and issue the command show ip prot enter. r2#sh ip prot % Ambiguous command: sh ip prot r2# well, now... r2#show ip prot? protocol-discovery protocols r2#show ip prot so what is show ip protocol-discovery? r2#sh ip protocol-discovery ? interface Show for a specific interface protocol Show stats about a pariticula protocol stats Show Stats top-n Show Top-N protocols by bytes | Output modifiers OK. so a command I've been using since 11.2 is no longer valid. except that it is on other routers. but look - still good on other routers: r3#sh ip prot? protocols r3#sh ip prot OK, check CCO, no record of any such command as show ip protocol-discovery in any command reference I check. A search of CCO for the phrase reveals nothing. now what? the IOS version in question is: r2#sh ver Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-JS56I-M), Version 12.1(5)T10, RELEASE SOFTWARE (f c2) sigh. have not run into this before, not in two trips through the lab, not on any number of routers and IOS versions, both at home and in customer installations. Anyone got any clue what show IP protocol-discovery does? sheesh.. another good shortcut down the tubes. Chuck Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32793t=32357 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
E1 R2 Signalling [7:27270]
Hi all, I've a prbolem related to appearence of caller ID on E1 R2 configured on AS 5400. What do I've to add in configuration to support caller ID appearence or is it enabled by default like DNIS? Any help greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27270t=27270 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Accounting on RADIUS [7:27271]
Hi all, Can I apply accounting service with no authentication done?? i.e I want dialup users to login on my network without any authentication and then start accounting them. How this can be done?? I try the following and it works: aaa authentication ppp default none aaa accounting network default start-stop group radius Are there any better ideas??? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27271t=27271 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX advanced exam [7:24478]
Hi all, I'm preparing for taking the PIX advanced exam within 2 days but I need to know how the exam looks like...type of questions and main points to focus on in my study. Any help greatly appreciated. BR, komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24478t=24478 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MPLS 641-910 [7:14521]
I'd like to know whether it's still a beta exam or not? Are those 2 books only enough for preparation for exam? Tim O'Brien wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I would say that these 2 books would probably be a very good place to start... http://www.ciscopress.com/book.cfm?book=168 http://www.ciscopress.com/book.cfm?book=111 Tim - Original Message - From: Muhammad Zahid To: Sent: Wednesday, August 01, 2001 1:09 PM Subject: MPLS 641-910 [7:14521] Dear all, Any one preparing for it ...and want to share knowledge with me. please guide me where can i get the MPLS 641-910 material. Kindest Regards Muhammad Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14631t=14521 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
SP Telco Environment [7:14457]
Hi all, I'm taking my first carrer steps as a network planning and configuration engineer in a PDN (Public Data Network) that'll be based on Cisco Access Servers,Core BPX and MGX switches and DSLAMs. I'd appreciate ur advice about how to go through the SP Telco environment, what I've to read about (MPLS,ATM,DSL tech,..) and most importantly what specific courses and certifications to take. I hear about the MPLS training and certification.Is it right? and what recommended books for this certification?? I want to know more,learn more and read more and to reorganize my mind so that i can take right steps through. Can anybody help me? I'd be very grateful. Mohamed Elkomy, CCNA,CCNP,CCDA (routing and switching track) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14457t=14457 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SP Telco Environment [7:14457]
hi Mamoor, Thanks for advice. What books recommended for CCIP for my self study?? What about other certifications like MPLS?? I hear there'll be a beta exam for MPLS.U know something about that? thx for help and advice. Ahmed Mamoor Amimi wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi Mohamed , Yes ur right there is a certification and from that u can cover the topics like ATM , MPLS , INTERNETWORKING , QoS , MULTICASTING etc. and that certification is CCIP the new certifiacation from CISCO .. This is one from u ... u can check it on CISCO site. or mail me fro details... -Mamoor Mohamed El Komy wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi all, I'm taking my first carrer steps as a network planning and configuration engineer in a PDN (Public Data Network) that'll be based on Cisco Access Servers,Core BPX and MGX switches and DSLAMs. I'd appreciate ur advice about how to go through the SP Telco environment, what I've to read about (MPLS,ATM,DSL tech,..) and most importantly what specific courses and certifications to take. I hear about the MPLS training and certification.Is it right? and what recommended books for this certification?? I want to know more,learn more and read more and to reorganize my mind so that i can take right steps through. Can anybody help me? I'd be very grateful. Mohamed Elkomy, CCNA,CCNP,CCDA (routing and switching track) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14469t=14457 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CID course [7:14130]
I'm studying for CID course and i've the CID book,but i find on Cisco site about CID some topics that aren't covered in the book that's with me like: 1- VPN architecture,benefits and security. 2- Describe the PCM process for encoding an analog signal into a digital stream of 1s and 0s 3- Define local loops, trunks, and interswitch communications 4- Describe the types of PSTN signaling methods 5- Describe voice signaling types 6- Identify key voice over packet network design considerations 7- Describe the phases of an IP Telephony call So what's wrong with my book?? Is there a new edition for the CID book covering those topics. My edition is 2000. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14130t=14130 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Hello All [7:13821]
welcome,as we need a voice specialist like you on the list. Can I ask you to recommend for me the best books explaining voice technology (over ip,frame relay and ATM) either from Cisco Press or from others?? Mustafa For CCIE wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Greetings to everybody! I have heard this list from a friend and I believe it will help me to get Routing Switching CCIE as well as my general networking knowledge. Let me introduce myself a little bit: My name is Mustafa Tinmaz. I am working as a TAC engineer for Cisco Systems. I guess I cannot help that nuch regarding data but can provide input for voice questions that you may have as I am supporting VoIP technology in Cisco. happy computing!!! mustafa _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13836t=13821 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cit [7:13603]
Focus on questions about : 1- Protocol analyzers (you must be able to detect the problem from the analyzer O/P). 2- The CIT book appendix about Cisco TAC,Tools,S/W centre,(there're many questions about that part) Send me ur mail and i'll send u a good dump. Moahzam Durrani wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... any hints for CIT. Are there alot of appletalk and ipx questions ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13840t=13603 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: routing and routed [7:11655]
parky chan wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear What is the different of routing protocols and routed protocols and give me example? Routing Protocol is the protocol respomsible for routing traffic [i.e calculate the possible routes to the destination and chooses the best route(s) based on the metric it uses for route calculation] like RIP,OSPF,IGRP,... Routed Protocol like IP,IPX,... represents the traffic routed from source to destination under responsibility and intelligence of the routing protocol. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11658t=11655 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCDA after CCNP, How tough???? [7:10960]
I also have same situation.I just finished my CCNP and i still whether it worth to go through the desidn track or not. I want advice from u all whether the design track 'll add to me or is it better to go through CCNP Specialization. Oletu Hosea Godswill CCNP, CCNA. wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, Please tell me more about the CCDA exam, I recently got my CCNP, I want to get my CCDP before going for the CCIE written, I gather that despite my CCNP, I would have to do CCDA. Am preparing for the CCDA now to write it sometime this week. Am using CCDA by Todd Lammle(Sybex). I found alot of CCNA and BCSN stuffs in the book, I only have about one or two chapters dealing with hardware and other stuffs. Please can someone tell me whether the sybex book is enough or I need some other materials. A friend was once telling me to read up SOHO and other remote/Home office devices covered in BCRAN nothing was mentioned about these in the sybex book. Do I need these additional knowledge? Please help. Thanks. Regards. Oletu Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11670t=10960 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ppp hdlc [7:10737]
Both PPP and HDLC are encapsulation protocols on serial interfaces.But PPP is better than HDLC in 2 main points: 1- PPP supports multiple network layer encapsulation (IP,IPX,AppleTalk,...) while standard HDLC supports only IP encapsulation.[Cisco HDLC supports multiple network layer encapsulation]. 2- PPP suports both PAP and CHAP authentication protocols which provides a secure point-to-point session while HDLC doesn't support that. friend wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear all pls show me difference ppp and hdlc Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10777t=10737 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE prerequisites [7:10783]
Is the CCDP is a must prerequisite for CCIE Networking support or the CCNP is just enough?? In other way,can i go through CCIE exam without being CCDP?? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10783t=10783 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CIT 2.0 Exam !! [7:10615]
I think you need to pass the first three exams before CIT.You'll find some difficulty in understanding many points in CIT which are covered in details in the first three exams. Ryan Rankin wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Is it possible top take this exam b 4 the other CCNP exams - please guys and girls - would appreciate some advice !!! :) txs Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10626t=10615 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router show commands [7:9747]
I'd like to know the effect of show buffers command on router and why do i need buffer pools on the router although each interface has its own buffers to process incoming packets. Plz send me any papers talking simply about Router Architecture. thanks, komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9747t=9747 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fast Switching on Cisco Routers [7:9753]
I'd like to know which is the default switching in Cisco Routers for TCP/IP traffic? Is it Process or Fast Switching? Also there're some questions I need an answer to: 1- When issuning debug commands,do I need to turn off Fast Switching ? 2- Which leads to more CPU and Memory utilization: Process or Fast Swithing? 3- What's the differnece between Fast,Autonomous,Silicon and Optimum Switching? I also need some technical papers about Distributed Switching using VIP cards on Cisco 7500 series and its Architecture. Thanks, komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9753t=9753 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OSPF Routing based on ToS [7:9674]
Hi all, Can anybody help me how I can configure OSPF Routing based on ToS (For example if the IP 3 ToS bits specify low delay,low throughput and high reliability,OSPF calculates routes to destination based on this ToS designation). Thanks, komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9674t=9674 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Multicasting in ATM [7:9679]
I know that in ATM aa Point-to-multipoint connection is unidirectional only(i.e The root node can transmit to leaves but leaves can't transmit to the root or each other on same connection). The question is Is it possible to have bidirectional multipoint-to-multipoint connections over ATM backbones? and How to map IP Multicasting protocols over ATM? thanks, komy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9679t=9679 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
