Re: Squeeze not working in 12.0
I used "squeeze" on the 802 serveral times, and it works. IOS is 12.0 Seng "John Neiberger" <[EMAIL PROTECTED]> wrote in message sa94d14f.027@fsutil01">news:sa94d14f.027@fsutil01... > I just now deleted one of two IOS files on a 2611 running 12.0(5). When > I tried to "squeeze" the file system, the CLI did not recognize the > squeeze command. I tried to undelete that file and again, it did not > recognize the command. So, I have a file that is marked as deleted and > can't do anything with it. > > I checked CCO and the docs there say that both squeeze and undelete > should be available in 12.0. > > Am I missing something obvious here? I need to free up some room on > that file system so that I can do an upgrade. > > Any ideas? > > Thanks, > John > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ATM WAN design question
I have a few questions about the ATM. Hopefully, you will clear me up on something that I am not so sure. I am tasked with upgrading my company current T1 WAN to ATM DS-3 to 7 regional cities in the US. The HQ is in Chicago. Currently, the requirement is only use these DS-3 for Data. In the future, they will use it to carry Data, Voice and Video to the branch offices. For now, can I just implement Hub-to-Spoke topology of PVCs with UBR, AAL5. 1. Do I need to do any QoS on these 3600 routers? 2. Do I need to have a Backup links for redundancy in case the DS-3 link goes down. What about "Last miles" redundancy? Or should I trust the Sprint ATM cloud and ignore the backup??? Need your help badly here. 3. What do I need to do if they want to use these DS-3 for AVVID. What type of QoS, CoS, AAL1 or AAL2? What type of Backup should I use if we implement AVVID? Please shed me some light if you could. many thanks in advance. __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Wireless T1 WAN backup
Hi Everyone, Have anyone experienced with Wireless T1 WAN using as a backup link? Please shed me some light or give me your comment. Thanks in advance. Kim. __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Network problem???
I have a problem with all of my Windows 2000 servers failed to authenticate into the PDC which is running Windows NT 4.0 server. The Apps people are saying that it is the Switches Network that I have. I checked all of my switches and routers, I can not find of any ACL or filter that cause their problem. They are thinking that I do not know what I am doing and ask me to call Cisco TAC for help. Before I do that, does anyone see this before? Kim, Thanks in advance. __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How to upgrade Catalyst 6500 MSFC IOS [7:417]
Hi everyone, I feel very stupid to ask this question but I can not find any documentations that show me how to upgrade my Catalyst 6509 MSFC IOS to 12.1.x. I know how to upgrade the CatOS on the SUP1A but not the IOS for the MSFC. Can someone help me? Thanks. Kim. __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=417&t=417 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Upgrade Catalyst 6509 MSFC problem [7:949]
I am trying to upgrade my Catalyst 6509 MFSC to version 12.1.5. When I issued the cmd: copy tftp flash at the router prompt. It failed and told me that there are not enough space to upgrade the new image. Can someone help me with this. I am digging cisco web site for reading right now. Sorry this is my first time with this. Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=949&t=949 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Upgrade Catalyst 6509 MSFC problem [7:949]
How do I erase the current flash. The erase flash cmd does not work on the Catalyst 6500. Do I need to switch to ROMMON to erase the current IOS and upgrade the new IOS from there? Kim. --- VOIP 2000 wrote: > Kim, > > You have to delete the old IOS and make sure you > have enough Flash > available. > > EM > --- > I am trying to upgrade my Catalyst 6509 MFSC to > version 12.1.5. When I issued the cmd: > copy tftp flash at the router prompt. It failed and > told me that there are not enough space to upgrade > the > new image. Can someone help me with this. I am > digging > cisco web site for reading right now. Sorry this is > my > first time with this. > > Kim. > > __ > Do You Yahoo!? > Yahoo! Auctions - buy the things you want at great > prices > http://auctions.yahoo.com/ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > _ > Get Your Private, Free E-mail from MSN Hotmail at > http://www.hotmail.com. > __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=960&t=949 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Upgrade Catalyst 6509 MSFC problem [7:949]
Jason, I know that I do not have enough space on the flash. It has 16MB and the current image already took 9MB. How do I erase it and load the new image. That is my question. Kim. --- "Jason J. Roysdon" wrote: > "show flash" or "dir" will report that you probably > don't have enough space. > > -- > Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, > Network+, A+ > List email: [EMAIL PROTECTED] > Homepage: http://jason.artoo.net/ > > > > ""Kim Seng"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I am trying to upgrade my Catalyst 6509 MFSC to > > version 12.1.5. When I issued the cmd: > > copy tftp flash at the router prompt. It failed > and > > told me that there are not enough space to upgrade > the > > new image. Can someone help me with this. I am > digging > > cisco web site for reading right now. Sorry this > is my > > first time with this. > > > > Kim. > > > > __ > > Do You Yahoo!? > > Yahoo! Auctions - buy the things you want at great > prices > > http://auctions.yahoo.com/ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=961&t=949 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Set span command reset my MSFC Vlan interfaces [7:1116]
Have anyone experienced this: I issued a SET SPAN VLANxxx 5/1 and all a suddden, all of my interface VLANs on my MSFC was brought down and went back up right away but users noticed a delay when they was flapped. Can anyone explain what happened? Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1116&t=1116 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
NAT and MS Terminal Server [7:1765]
I have a MS Terminal server (Port 3389) inside a private subnet. I am using NAT from the router. I am using a Static NAT access list: ip nat inside source static tcp 192.168.1.25 3389 200.200.200.1 3389 I still can not access to the terminal server from the Internet. Can some one tell me what I do wrong. Many thanks in advance. Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1765&t=1765 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP multi-homed load sharing/balancing and redundancy [7:2095]
Everyone, I currently have two T-1's to ISP1 and a Fractional T3 to ISP2. I am using static and default routes to connect them to the internet. There is no automaticaly fail-over as you know. Therefore, I am changing our ISPs but keep the BW the same. Two T1's to ISP1 and FT3 to ISP2 and I would like to run BGP-4 at this time with multihomed load sharing and load balancing across these 3 links. These will be two steps upgrade: 1. Run BGP load sharing/balancing across two T1 links to ISP1. Can I do this while the FT3 link is still up and running with default route to ISP2. Another word, can I do load sharing/balancing and redundancy at this step across these three links? (BGP via T1s to ISP1 and FT3 default route to ISP2) 2. The second step is changing the fractional T3 from default route to run BGP and do load sharing ,balancing and redundancy across these three links. Can these be done and what would be the appropriate steps. Many thanks in advance. Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=2095&t=2095 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
HSRP and set spantree root design question [7:3208]
I have a switches internetwork with: S1 S2 C1 C2 D1 D2 A1 A2 S= server farm switch (Routing with MSFC) C= Core switch (Layer 2 only) D= Distribution switch (Routing with MSFC) A= Access switch A1 (is VLAN2) is connected to both D1 and D2. A2 (is VLAN3) is connected to both D1 and D2. D1 and D2 are running OSPF routing with HSRP. The question that I have is since D1 and D2 are running OSPF routing with HSRP. This provides Layer-3 load balancing, sharing and redundancy, Do I have to worry or configure Layer-2 connection from A1 and A2 to both D1 and D2? I mean "set spantree root 2 on D1 and set spantree root secondary 2 on D2 ??? Many thanks in advance. Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3208&t=3208 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Wireless for backup T1 link??? [7:3651]
Have anyone experience with Wireless technology for backup link solution? I have 2 cities: NY city and LA connected via T1 point to point and looking for a backup solution that does not cost too much. Is wireless is a good solution for this backup? Thanks! Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3651&t=3651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ATM question [7:4452]
To the ATM guru, I have a ATM WAN via SPRINT from the HQ (Chicago) to 4 regional branch office (LA, FL, NY and CO). The PVC infomations that SPRINT provides to me after the circuit installation completed has only the Originating VPI and Terminating VPI. There are no information about the VCI. They said I can pick any number for the VCI. This is new to me. Can someone tell me that is true? I thought to configure PVC you need both the VPI/VCI that must match with the ingress ATM switch. Many thanks in advance. Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4452&t=4452 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Configure ATM point to point subinterface [7:4539]
Hi everyone, Simple ATM configuration question. I need to use Map-list and Map-group to configure ATM Multipoint I DO NOT need to use them to configure ATM Point to Point? Am I correct? Kim. __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4539&t=4539 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco VPN bandwidth solution??? [7:4669]
Hi everyone, I have a fractional T3 for Internet connection in my company. I am implementing VPN for user remote access with Cisco VPN 3030. I think I have a problem with my FT3 bandwidth ultilization because the remote user VPN sessions are dropping off at some peak time during the day. Is there a way that I can implement some kind of QoS to reserve portion of this FT3 bandwidth dedicated for the VPN (Without help from the ISP side since they already refused to do so). It does not have to be dynamicly allocated with the normal Internet traffic. Many thanks in advance. Kim __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4669&t=4669 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP multi-homed load sharing/balancing and redundancy [7:7371]
Below is my company Internet connecttion. +--++--+ | UUNet router |+ Verizon router + +--++--+ | || Hssi0S0 S1 \ // \// \T-3 / T1 / T1 \// \ // Hssi0 S0 S1 | || +---+ | My company Internet router + +---+ | FastEthernet0 | FIREWALL We currently use default route via T3 to UUNET for Internet connection. The two T1 to Verizon is for backup in case the T3 link is down. This is a manual switch over between the T3 and T1 for backup since we use the default and static route. We are in the process of implemeting BGP4 for load balacing and redundancy. Can someone shed me some light on the best way to implement BGP across these three link for redundancy and load sharing/balancing. Many thanks in advance. Kim. __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7371&t=7371 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco VPN 3000 and ACS TACACS+ [7:9083]
Have anyone successfully configured the Cisco VPN 3030 concentrator to work with Cisco ACS TACACS+ for Administration anthentication? Kim. __ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9083&t=9083 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VIC-FXS [7:37348]
Hi, Does anyone know where I can find sources to buy VIC-FXS with good price? I can not find them regularly on Ebay. Kim. __ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37348&t=37348 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Have anyone successfully installed minicom on Solaris 8? [7:37723]
Have anyone successfully installed minicom on Solaris 8? I tried and it failed me when I did: "make ; make install". Kim. __ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37723&t=37723 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Terminal Server [7:26624]
Mark, Issue the command: clear line . This will fix the problem. Han. --- Mark Rose wrote: > I am trying to get a terminal server working. It was > working several months > ago but when I tried to bring it up today, I get > the message " %3 is not an > open connection". I do not have enough experience to > know what is not > working, I could use some help, also an explanation > of what is happening so > I will fully understand what I have missed. > > Thanks for your help > Mark > > > 2511 > > Current configuration: > ! > version 11.0 > service password-encryption > service udp-small-servers > service tcp-small-servers > ! > hostname jump > ! > enable secret 5 $1$SAyh$VqEHDm68YbwkhO5RgT7b7. > ! > no ip domain-lookup > ! > interface Loopback0 > ip address 10.1.1.1 255.255.255.255 > ! > interface Ethernet0 > ip address x.x.x.x 255.255.255.248 > ! > interface Serial0 > no ip address > shutdown > no fair-queue > ! > interface Serial1 > no ip address > shutdown > ! > ip host West 2001 10.1.1.1 > ip host East 2002 10.1.1.1 > ip host North 2003 10.1.1.1 > ip host South 2004 10.1.1.1 > ip host Houston 2005 10.1.1.1 > ip classless > ip route 0.0.0.0 0.0.0.0 x.x.x.x > banner exec ^C > > 01 West Console > 02 East Console > 03 North Console > 04 South Console > 05 Houston > ^C > ! > line con 0 > line 1 16 > session-timeout 20 > no exec > transport input all > line aux 0 > transport input none > line vty 0 4 > password 7 045E070F052044 > login > ! > end > > > North (2522) > > Current configuration: > ! > version 11.2 > service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname North > ! > enable secret 5 $1$F2gJ$LGaIm7rXo0n4KiMKZOSX21 > ! > ! > interface Ethernet0 > no ip address > shutdown > ! > interface Serial0 to> > > interface Serial9 > no ip address > shutdown > ! > interface BRI0 > no ip address > shutdown > ! > no ip classless > ! > line con 0 > exec-timeout 0 0 > logging synchronous > line aux 0 > line vty 0 4 > password 7 121C091E180A04 > login > ! > end [EMAIL PROTECTED] __ Do You Yahoo!? Find the one for you at Yahoo! Personals http://personals.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26626&t=26624 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Caslow [7:27402]
He is teaching at http://www.netmasterclass.net/Services/Training/training.html Han. --- Gus Hussein wrote: > Does any one know Caslow's E-mail or where he > works, he used to teach at > Mentor. > > Does anyone know where he working now > > Thanks > > > > > > - > Do You Yahoo!? > Yahoo! GeoCities - quick and easy web site hosting, > just $8.95/month. [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27421&t=27402 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE IPExpert WorkBook [7:28096]
Does anyone want to share with me the IPExpert workbook in DC Metro area? I would like to buy but it is too much for my budget right now. Kim. __ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28096&t=28096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Site-to-Site and Remote Access VPN on PIX? [7:62937]
Greetings, Can I configure a Cisco PIX firewall to do both site-to-site and remote access vpn preshares key in one box? The reason I asked because after configuring site-to-site vpn, my remote access vpn stops working. Kim. __ Do you Yahoo!? Yahoo! Shopping - Send Flowers for Valentine's Day http://shopping.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62937&t=62937 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Site-to-Site and Remote Access VPN on PIX? [7:63100]
Greetings, Can I configure the PIX to do both site-to-site and Remote access VPN at the same time? I think it is impossible since I can only apply only one crypto map to the outside interface. Can someone confirm? Kim. __ Do you Yahoo!? Yahoo! Shopping - Send Flowers for Valentine's Day http://shopping.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63100&t=63100 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP question [7:41132]
My network has an Internet Border router. The router has two ISPs connection: UUNET(T3) and SPRINT(T1). We have a supernet class B: 18x.18x.0.0/16. Can I configure the router so that only one of the class C subnet of this supernet for example 18x.18x.1.0/24 to use the SPRINT link for both inbound and outbound traffic. The rest of the supernet will use the UUNET link. But they need to backup each other when one of them fails. Thanks in advance. Kim. __ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41132&t=41132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CS-516 Terminal Server Issues [7:41760]
You may want to try exec-timeout 0 0 under line con0 and no exec under line 1 16. If you console into the 516-CS, it will take 5-10 minutes. It is normal according to Cisco. It take about 30 sec if you telnet into it instead of using the console. Han. --- "[EMAIL PROTECTED] (Timothy Ouellette)" wrote: > You may want to try the no-exec under your line con > 0 > > Maybe there's a bunch of noise of the line from the > other boxes trying > to establish a connection. > > Just a thought. > > Tim > > > On 17 Apr 2002 14:20:12 -0400, > [EMAIL PROTECTED] ("Tim Lovelace") > wrote: > > >I finally have gotten back around to getting my > CS-516 back up and > >working, and I am having a problem.. > > > >To actually connect to a console takes somewhere in > the area of 5 > >minutes, I hope that is not normal. Also, many > times I get "Connection > >refused by remote host" although I could connect 20 > minutes before and I > >can still consol in with my laptop fine. Below is a > sh ver and wr term. > >If anyone has any advice, please let me know. > Thanks for the help. > > > >Tim > > > >CS#sh ver > >CS Software (CS500-KR), Version 9.21(3), RELEASE > SOFTWARE (fc1) > >Copyright (c) 1986-1994 by cisco Systems, Inc. > >Compiled Tue 03-May-94 16:25 by jyang > > > >ROM: System Bootstrap, Version 4.7(3), RELEASE > SOFTWARE > > > >CS uptime is 1 hour, 55 minutes > >System restarted by reload > >System image file is unknown, booted via tty1 > > > >Cisco-CS500 (68331) processor with 10240K bytes of > memory. > >SuperLAT software (copyright 1990 by Meridian > Technology Corp). > >1 Ethernet/IEEE 802.3 interface. > >16 terminal lines. > >32K bytes of non-volatile configuration memory. > >Configuration register is 0x101 > > > >CS#wr term > >## > >Current configuration: > >! > >version 9.21 > >no service pad > >! > >hostname CS > >! > >enable password XX > >! > >ip routing > >no ip domain-lookup > >! > >interface Loopback0 > >ip address 10.10.10.10 255.255.255.0 > >! > >interface Ethernet0 > >ip address XXX.XXX.XXX.XXX 255.255.255.0 > >! > >ip host R9 2009 10.10.10.10 > >ip host R7 2007 10.10.10.10 > >ip host R8 2008 10.10.10.10 > >ip host R1 2001 10.10.10.10 > >ip host R2 2002 10.10.10.10 > >ip host R3 2003 10.10.10.10 > >ip host R4 2004 10.10.10.10 > >ip host R5 2005 10.10.10.10 > >ip host R6 2006 10.10.10.10 > >ip host R10 2010 10.10.10.10 > >ip host R11 2011 10.10.10.10 > >ip host R12 2012 10.10.10.10 > >ip host R13 2013 10.10.10.10 > >ip host R14 2014 10.10.10.10 > >ip host R15 2015 10.10.10.10 > >ip host R16 2016 10.10.10.10 > >ip route 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX > >! > >line con 0 > >line 1 16 > >transport input telnet > >line vty 0 4 > >password > >login > >! > >end > > > >CS# [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41794&t=41760 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Lab Date Swap in RTP in June [7:43315]
Looking for a Lab day swap on June 17 at RTP to early August. Please email me if you are interested. Kim. __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43315&t=43315 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question on ATM OC-3 WAN connection and TcpWindowSize [7:56612]
Hi all, I have an OC-3 155Mbps UBR WAN link between two sites. When I transfer files between these two sites using windows explorer or ftp, I only have about 8Mbps. Sprint told me I need to change the registry: TcpWindowSize to get better throughput. Have anyone experienced this before? Thanks in advance. Kim. __ Do you Yahoo!? HotJobs - Search new jobs daily now http://hotjobs.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56612&t=56612 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP using HSRP virtual ip address? [7:58907]
__ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58907&t=58907 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Can I configure BGP neighbor using HSRP VIP ip address of [7:58908]
r1 | | - | | | | r2 r3 In the above configuration, r2 and r3 are configured with HSRP. I need to configure iBGP between r1, r2 and R3. Can I configure neighbor from r1 to r2 and r3 using the HSRP virtual ip address? or I need to use r2, r3 real ip address or using peer-group? Thanks. Kim. __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58908&t=58908 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: TTCP support for 2500 platforms [7:62117]
I am running ios ver 12.1.17 on my 2500 and it supports TTCP. TTCP also available on MSFC1/MSFC2. Han. --- MADMAN wrote: > It's also supported on the 7500 and 7200 series > routers. > >Dave > > Brad wrote: > > I have not been able to find it on ANY platform > other than the 12000 and > > 1, regardless of IOS version. I know Cisco > tech docs state it is on > all > > IOS versions 12.0 or newer but I have not found > that to be the case. Let > me > > know if you find out different. > > Brad > > ""Petru Stefan"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > >>Hello, > >>Does anyone know a ios for 2500 that contain > support for ttcp.I've already > >>tried the 12.0 ip plus but is not there. > >>Regards > >>Stefan > -- > David Madland > CCIE# 2016 > Sr. Network Engineer > Qwest Communications > 612-664-3367 > > "You don't make the poor richer by making the rich > poorer." --Winston > Churchill [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62231&t=62117 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help with upgrading 1601 s/w [7:27433]
Hi group, I need some advice on upgrading my 1601, Read from Flash(RFF) router. It's now running IOS 11.1 on a 4Mb flash card. I have bought a new 16Mb flash card and loaded IOS 12.1 (size about 10Mb) on my laptop. Can I swap out the old flash card and insert the new 16Mb and do 'copy tftp flash'? I have checked with some document in CCO which disallow flash card removal for RFF 1600 routers. Will configuring the config-register help? Any advice?? Thanks. David Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27433&t=27433 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help with upgrading 1601 s/w [7:27433]
Thanks MADMAN and [EMAIL PROTECTED] Finally found the procedures here.. http://www.cisco.com/warp/public/130/upgrade_index.shtml -Original Message- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 27, 2001 10:45 PM To: [EMAIL PROTECTED] Subject: Re: Help with upgrading 1601 s/w [7:27433] You can pull the flash card from the 1600 but this will crash the router. I haven't done so in quite some time but I think you can pull your old flash and install the new flash and it should boot up off the frist file on the flash card. You can always add the "boot system flash x" to CYA. dave "Ng, Kim Seng David (David)" wrote: > > Hi group, > > I need some advice on upgrading my 1601, Read from Flash(RFF) > router. It's now running IOS 11.1 on a 4Mb flash card. I have bought a > new 16Mb flash card and loaded IOS 12.1 (size about 10Mb) on my laptop. > Can I swap out the old flash card and insert the new 16Mb and do 'copy > tftp flash'? I have checked with some document in CCO which disallow > flash card removal for RFF 1600 routers. Will configuring the > config-register help? Any advice?? > > Thanks. > David -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27466&t=27433 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: isdn problem [7:27975]
>From your config, I assume you ping from router 2 to 1 since you only have dialer map at BRI0 of router 2. I think you are missing this in the interface config of BRI0 at router 2 ppp pap sent-username ... password . Hope this helps... -Original Message- From: sudhakar [mailto:[EMAIL PROTECTED]] Sent: Monday, December 03, 2001 7:18 PM To: [EMAIL PROTECTED] Subject: isdn problem [7:27975] >Dear Sir i connected router1 and router2 by BRI0 isdn line, but it showing conection fails., not pinging , So plese give me solution on this. > waoting for u r replay router1 router1#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname router1 ! ! username router2 password 0 router2 ip subnet-zero isdn switch-type basic-net3 ! ! ! ! interface Ethernet0 ip address 198.168.0.8 255.255.255.0 no ip directed-broadcast no ip route-cache ! interface Serial0 description BLR-PUN LINK bandwidth 64 ip address 172.16.127.4 255.255.255.0 no ip directed-broadcast no ip route-cache shutdown no fair-queue ! interface BRI0 ip address 172.16.130.2 255.255.255.0 ip directed-broadcast encapsulation ppp dialer idle-timeout 500 dialer-group 1 isdn switch-type basic-net3 no peer default ip address no fair-queue ppp authentication pap router rip redistribute static network 172.16.0.0 ip classless ip route 0.0.0.0 0.0.0.0 172.16.130.1 ! ! line con 0 transport input none line vty 0 4 ! end Router2 router2#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router2 ! enable password 12#$ ! username mcd password 0 12#$ username router1 password 0 router1 ip subnet-zero isdn switch-type basic-net3 ! ! ! interface Ethernet0 ip address 172.16.4.3 255.255.255.0 ip directed-broadcast no ip route-cache ! interface Serial0 bandwidth 64 ip address 172.16.129.1 255.255.255.0 no ip directed-broadcast ! interface BRI0 bandwidth 64 ip address 172.16.130.1 255.255.255.0 no ip directed-broadcast encapsulation ppp dialer idle-timeout 99 dialer map ip 172.16.130.2 broadcast 2648970 dialer hold-queue 25 dialer load-threshold 1 either dialer-group 1 isdn switch-type basic-net3 no peer default ip address ppp authentication pap ! router rip network 172.16.0.0 ! ip classless ip route 0.0.0.0 0.0.0.0 172.16.4.1 ip route 172.16.126.0 255.255.255.0 172.16.4.1 ip route 172.16.130.0 255.255.255.0 172.16.130.2 ! dialer-list 1 protocol ip permit ! line con 0 password 123 transport input none line vty 0 4 password 123 login ! end Debugg file router2#debug is router2#debug isdn eve router2#debug isdn events ISDN events debugging is on router2#p *Apr 19 04:52:15.118: ISDN BR0: TX -> RRp sapi = 0 tei = 94 nr = 10 *Apr 19 04:52:15.158: ISDN BR0: RX INFOc sapi = 0 tei = 94 ns = 6 nr = 10 i = 0x080115050402889018018370088032363438393730 *Apr 19 04:52:15.884: SETUP pd = 8 callref = 0x15 *Apr 19 04:52:15.884: Bearer Capability i = 0x8890 *Apr 19 04:52:15.888: Channel ID i = 0x83 *Apr 19 04:52:15.888: Called Party Number i = 0x80, '2648970' *Apr 19 04:52:15.944: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 11 *Apr 19 04:52:16.130: ISDN BR0: received HOST_INFORMATION call_id 0x8193 *Apr 19 04:52:16.694: ISDN Event: dsl 0 call_id 0x8193 B channel assigned by swi tch 0 ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 12 *Apr 19 04:52:16.765: ISDN BR0: received HOST_CONNECT call_id 0x8193 *Apr 19 04:52:16.765: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up *Apr 19 04:52:16.789: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 2648 970 *Apr 19 04:52:16.793: BR0:1 PPP: Treating connection as a callout *Apr 19 04:52:16.797: BR0:1 PPP: Phase is ESTABLISHING, Active Open *Apr 19 04:52:16.797: BR0:1 LCP: O CONFREQ [Closed] id 139 len 10 *Apr 19 04:52:16.801: BR0:1 LCP:MagicNumber 0x0184C7B3 (0x05060184C7B3) *Apr 19 04:52:16.801: ISDN BR0: Event: Connected to 2648970 on B1 at 64 Kb/s *Apr 19 04:52:16.805: ISDN BR0: TX -> INFOc sapi = 0 tei = 94 ns = 7 nr = 12 i = 0x0801150F *Apr 19 04:52:16.809: CONNECT_ACK pd = 8 callref = 0x15 *Apr 19 04:52:16.813: ISDN BR0: RX RRr sapi = 0 tei = 94 nr = 13 *Apr 19 04:52:16.840: ISDN BR0: received HOST_FACILITY_INVOKE call_id 0x8193 Facility i = 0x91A1130202410B020122300AA1053003020101820100 *Apr 19 04:52:16.844: - ETSI Supplementary Service, Invoke, AOC-D Charging Uni ts: 1 *Apr 19 04:52:16.848: BRI0:1: AOC-D Recorded Units = 1 *Apr 19 04:52:16.852: BR0:1 LCP: I CONFREQ [REQsent] id 123 len 14 *Apr 19 04:52:16.852: BR0:1 LCP:AuthProto PAP (0x0304C023) *Apr 19 04:52:16.856: BR0:1 LCP:MagicNumber 0x0393D0A3 (0x05060393D0A3) *Apr 19 04:52:16.856: BR0:1 LCP: O CONFNAK [REQsent] id 123 len 9 *Apr 19 04:52:16.860: BR0:1 LCP:AuthProto CHAP (0x0305C
Dialer keyword in Snapshot Server cmd [7:28557]
Hi group, What function does the 'dialer' keyword in the 'snapshot server' command has?? For eg, snapshot server 5 dialer As I understand, this keyword is required for snapshot clients to allow them to dial to servers as only clients dials to servers (Am I right?). What function it has then for servers since they never dial to clients? The Cisco CD says this about the keyword: snapshot server active-time [dialer] dialer = (Optional) Allows the client router to dial up the remote router in the absence of regular traffic. Thanks David Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28557&t=28557 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Dialer keyword in Snapshot Server cmd [7:28557]
Nick, I managed to do some experiment with my home lab. When I ignored the dialer keyword at the server side, the server end will not treat the routing updates (ie. sending of routing updates) as interesting. As a result, the idle timeout (default 120sec) will count down till zero. Hence, the server will disconnect the ISDN call after 120sec even if the snapshot active timer is not yet due. However, if the keyword is present, every time an update is sent, the idle time-out is reset back to 120sec and the ISDN link is kept up until the snapshot timer expires. >From my observation, I think you can ignore the keyword if you are applying the snapshot on serial interfaces or any interfaces which doesn't dial out. Purely my guess. Thanks David -Original Message- From: Shah Nick [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 09, 2001 3:32 PM To: [EMAIL PROTECTED] Subject: RE: Dialer keyword in Snapshot Server cmd [7:28557] This keyword is applied on both server & client, but it works on Clients only. It is used in conjuntion with dialer map snapshot command, which directs the string to dial etc. >From what I understand its just one of the Cisco things, whereby you also have to put in the dialer keyword (as in Snapshot server 5 dialer) on the server end, but without the matching dialer map snapshot command (and also due to server keyword) it never dials out and its also not meant to dial out. hth Nick Shah Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28576&t=28557 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FW: Frame relay problems [7:28569]
Once you solve R1-R4 problem, that should solve R1-R3. On R4, remove the subi/f 0.1. Just work using the physical interface s0 and turn on inverse arp like what you have for R3. Also add a map from R4 to R3. That may help. Thanks David -Original Message- From: McHugh Randy [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 09, 2001 2:34 PM To: [EMAIL PROTECTED] Subject: Frame relay problems [7:28569] Does anyone know why I am seeing active pvc's on this hub and spoke frame relay config and only getting half succesfull pings. I had to delete the dlci and interfaces and then reload the router because I changed the interface type from point to multi. Or really just create a new sub interface. See below what I am getting: Thanks This is a spoke router: r4#sh frame map Serial0 (up): ip 0.0.0.0 dlci 401(0x191,0x6410) broadcast, CISCO, status defined, active Serial0.1 (up): point-to-point dlci, dlci 401(0x191,0x6410), broadcast status defined, active r4#ping 172.16.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.1.1, timeout is 2 seconds: !.!.! Success rate is 60 percent (3/5), round-trip min/avg/max = 68/68/68 ms r4# This is a hub: r1#sh frame map Serial0.3 (up): ip 172.16.1.3 dlci 103(0x67,0x1870), dynamic, broadcast,, status defined, active Serial0.3 (up): ip 172.16.1.2 dlci 102(0x66,0x1860), dynamic, broadcast,, status defined, active Serial0.2 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast status defined, active r1#ping 172.16.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds: !.!.! Success rate is 60 percent (3/5), round-trip min/avg/max = 68/68/68 ms r1# And then from r3 which is a spoke router using a physical interface with map statments I cannot connect to the other spoke routers at all. r3#sh frame map Serial0 (up): ip 172.16.1.5 dlci 301(0x12D,0x48D0), static, CISCO, status defined, active Serial0 (up): ip 172.16.1.1 dlci 301(0x12D,0x48D0), dynamic, broadcast,, status defined, active Serial0 (up): ip 172.16.1.2 dlci 301(0x12D,0x48D0), static, CISCO, status defined, active r3#ping 172.16.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds: . Success rate is 0 percent (0/5) r3# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28577&t=28569 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bootstrap protocol in Multicast [7:65243]
Hi group, In Bootstrap protocol, does the PIM router selects the RP with the higest or lowest IP address (assuming everything else is the same) from the RP-set list obtained in the RP-discovery message?? I was reading Jeff Doyle's "Routing TCP/IP Vol 2" and pages 491 (first bullet point) and 564 (last second para) seems to contradict. I have done some testing and it seems to be the lower IP address. Auto-RP seems to be the opposite. Appreciate any response. Thanks David Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65243&t=65243 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Simulating a 64K link in lab [7:25061]
Hi group, I am new to this group. Wondering whether someone could help.. I have two routers (2621 and 1601) tied back-to-back using V.35 serial. Can I simulate a 64K link with this config if I execute "bandwidth 64000" at the interface prompt?? What I understand is that this command is used in eigrp to limit eigrp traffic to 50% of what ever b/w one specified. Does this physically limit the link to a speed of 64K too?? Thank you in advance ksng Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25061&t=25061 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Can frame-relay multipoint sub-interfaces support inverse arp?? [7:26362]
Hi, I was a bit confused after reading the Ciscopress CCNP Support book and Caslow's ccie book. Can frame-relay multipoint sub-interfaces support inverse arp DLCI mappings?? Ciscopress Support book seem to say no (not directly though) but Caslow's book says yes. Thanks in advance... David Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26362&t=26362 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]