What is static NAT subnet mask?
One static NAT question, I don't know how to explain. For example, ip nat inside source static 10.0.200.1 66.59.34.3 What is subnet mask for 10.0.200.1, and what is sebnet mask for 66.59.34.3? Thanks Shawn Xu _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Load Balance and Fault Redundancy [7:962]
One of our customers asks for load balance and fault redundancy. They have a Cisco router 1605 with a serial0 for T1 (216.94.x.x), and eth0 for local network, eth1 for DSL (66.59.x.x). This router satisfies their scenario hardware requirements. How to configure the Cisco router 1605 (just one router, not HSRP) to implement load balance and fault redundancy, and serial0 and eth1 are using different ip block? When DSL and T1 lines are both working fine, they want to have load balance. If one of the lines, either T1 or DSL, is down, they need fault tolerance. Let's say, T1 is down, all the users on the local network automatically use DSL to get to the Internet. Any suggestions will be highly appreciated. Shawn Xu _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=962&t=962 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Load Balance and Fault Redundancy [7:1127]
One of our customers asks for load balance and fault redundancy. They have a Cisco router 1605 with a serial0 for T1 (216.94.x.x), and eth0 for local network, eth1 for DSL (66.59.x.x). This router satisfies their scenario hardware requirements. How to configure the Cisco router 1605 (just one router, not HSRP) to implement load balance and fault redundancy, and serial0 and eth1 are using different ip block? When DSL and T1 lines are both working fine, they want to have load balance. If one of the lines, either T1 or DSL, is down, they need fault tolerance. Let's say, T1 is down, all the users on the local network automatically use DSL to get to the Internet. Any suggestions will be highly appreciated. Shawn Xu _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1127&t=1127 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Win 2000 DNS server query test failed [7:1852]
I know this is Cisco stuff study group, but I am really stuck at one DNS server problem, maybe someone knows. Also if we should not post any questions not related to Cisco, please warn me, and I will not do again next time. We have a Windows 2000 DNS server (66.59.140.251), and in fact it is working, but for some reasons it doesn't synchronize with other DNS servers properly. When we do "A simple query against this DNS server" and "A recursive query to other DNS servers" test, both of them failed. I have read some books, they say it is very important to pass these two tests, but they don't say why and how to make them pass. When we checked DNS log files,it say: ERROR: GQCS failure on dead socket. status=995, socket=456, pcon=00465EDC, state=-1, IP=66.59.140.251. What does it mean? How to fix this problem? Any help will be highly appreciated. Shawn Xu _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1852&t=1852 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
so weird [7:2550]
I have a router configured 216.226.97.130 for eth0 as local network gateway, and ip route 0.0.0.0 0.0.0.0 x.x.x.x, everything is working fine except one program: intny7.ilx.net. On any workstations, I can not ping this host which says time out. If I run route print on the workstations, it says network destination: 162.8.232.166, netmask 255.255.255.255, gateway 216.226.97.132. I wonder why it does not go through the default gateway 216.226.97.130 to get out, and tries a wrong gateway 216.226.97.130. Any idea will be appreciated. Shawn Xu _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=2550&t=2550 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Partners [7:3637]
What are requirments for a company to become Cisco partner or what are mininum requirements a company must satisfy in order to apply for a Cisco partner? How many CCIE must the company have? Thanks Shawn Xu _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3637&t=3637 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IIS5 migration [7:8136]
Hi, everybody: We have a Windows 2000 server IIS5 running, and so many web sites on it. Now we want to implement load balancing and fault tolerance functions, so that we have to build Windows 2000 Advanced Server machines, because you can not upgrade Windows 2000 Server to Windows 2000 Advanced Server.However some web sites are very difficult to set them up, and we did a long time ago supported by developers. So I don't want to manually build each site, is there any way for us to migrate Windows 2000 Server IIS5 configurations to Windows 2000 Advanced Server IIS5? Please help. Thanks. Shawn Xu CCNP,MCSE _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8136&t=8136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
IIS5 migration [7:8326]
Hi, everybody: We have a Windows 2000 server IIS5 running, and so many web sites on it. Now we want to implement load balancing and fault tolerance functions, so that we have to build Windows 2000 Advanced Server machines, because you can not upgrade Windows 2000 Server to Windows 2000 Advanced Server.However some web sites are very difficult to set them up, and we did a long time ago supported by developers. So I don't want to manually build each site, is there any way for us to migrate Windows 2000 Server IIS5 configurations to Windows 2000 Advanced Server IIS5? Please help. Thanks. Shawn Xu CCNP,MCSE _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8326&t=8326 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Topic repeat [7:33865]
First of all, I should announce I have searched Archives before I post this message, but not exactly match my question. Some people said for this topic you have to use BGP, and some people said you can use default route if you are only for load balance and fault tolerance purpose. We have one client, who currently uses T1 line (Cisco 2503 router) to an ISP, and has a whole class C ip address (/24) from the ISP. And on their local network, they have web server, mail server, etc. everything is working fine. Now they want to connect to us using SDSL line (Cisco 1605 router) for load balance and fault tolerance. How to do that? 1. Cannot use BGP, because nobody wants to buy a BGP router. 2. Static or default route: (1) HSRP groups implement load sharing, and automatically switching over in case of one line is down, is it right? (2) Because they are using T1 line ISP's IP address for local network, if T1 line is down, how can we route their traffic through DSL line, ip route 0.0.0.0 0.0.0.0 DSL_ISP will work? and from outside how people can reach their local network through DSL line? Thanks Shawn _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33865&t=33865 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Please confirm (conf#d22216f5b24622b2d135b956c50be7ca) [7:33866]
> >Hi, > >You have tried to post to GroupStudy.com's Professional mailing list. >Because >the server does not recognize you as a confirmed poster, you will be >required >to authenticate that you are using a valid e-mail address and are not a >spammer. By confirming this e-mail you certify that you are not sending >Unsolicited Bulk Email (UBE). > >By confirming this e-mail you also certify the following: > >1. The message does NOT break Cisco's Non-Disclosure requirements. > >2. The message is NOT designed to advertise a commercial product. > >3. You understand all postings become property of GroupStudy.com > >4. You have searched the archives prior to posting. > >5. The message is NOT inflammatory. > >6. The message is NOT a test message. > >To confirm, simply reply to this message. No editing is necessary. Once >confirmed, you will be able to post without additional confirmations. > > >Welcome to GroupStudy.com! > > >--ORIGINAL MESSAGE- > >From [EMAIL PROTECTED] Thu Jan 31 11:17:08 2002 >Received: from hotmail.com (f219.law14.hotmail.com [64.4.21.219]) > by groupstudy.com (8.9.3/8.9.3) with ESMTP id LAA03142 > GroupStudy Mailer; Thu, 31 Jan 2002 11:17:07 -0500 >Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; >Thu, 31 Jan 2002 08:18:22 -0800 >Received: from 66.59.140.7 by lw14fd.law14.hotmail.msn.com with HTTP; > Thu, 31 Jan 2002 16:18:22 GMT >X-Originating-IP: [66.59.140.7] >From: "Shawn Xu" >To: [EMAIL PROTECTED] >Subject: Topic repeat >Date: Thu, 31 Jan 2002 11:18:22 -0500 >Mime-Version: 1.0 >Content-Type: text/plain; format=flowed >Message-ID: >X-OriginalArrivalTime: 31 Jan 2002 16:18:22.0917 (UTC) >FILETIME=[E7734750:01C1AA72] > >Topic: connecting to two ISPs for load balance and fault tolerance. > >First of all, I should announce I have searched Archives before I post this >message, but not exactly match my question. > >Some people said for this topic you have to use BGP, and some people said >you can use default route if you are only for load balance and fault >tolerance purpose. > >We have one client, who currently uses T1 line (Cisco 2503 router) to an >ISP, and has a whole class C ip address (/24) from the ISP. And on their >local network, they have web server, mail server, etc. everything is >working >fine. > >Now they want to connect to us using SDSL line (Cisco 1605 router) for load >balance and fault tolerance. > >How to do that? > >1. Cannot use BGP, because nobody wants to buy a BGP router. >2. Static or default route: >(1) HSRP groups implement load sharing, and automatically switching over in >case of one line is down, is it right? >(2) Because they are using T1 line ISP's IP address for local network, if >T1 >line is down, how can we route their traffic through DSL line, ip route >0.0.0.0 0.0.0.0 DSL_ISP will work? and from outside how people can reach >their local network through DSL line? > >Thanks > >Shawn > > > > > > > > > > >_ >Chat with friends online, try MSN Messenger: http://messenger.msn.com > _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33866&t=33866 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Topic repeat [7:33868]
First of all, I should announce I have searched Archives before I post this message, but not exactly match my question. Some people said for this topic you have to use BGP, and some people said you can use default route if you are only for load balance and fault tolerance purpose. We have one client, who currently uses T1 line (Cisco 2503 router) to an ISP, and has a whole class C ip address (/24) from the ISP. And on their local network, they have web server, mail server, etc. everything is working fine. Now they want to connect to us using SDSL line (Cisco 1605 router) for load balance and fault tolerance. How to do that? 1. Cannot use BGP, because nobody wants to buy a BGP router. 2. Static or default route: (1) HSRP groups implement load sharing, and automatically switching over in case of one line is down, is it right? (2) Because they are using T1 line ISP's IP address for local network, if T1 line is down, how can we route their traffic through DSL line, ip route 0.0.0.0 0.0.0.0 DSL_ISP will work? and from outside how people can reach their local network through DSL line? Thanks Shawn _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33868&t=33868 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Topic repeat [7:33870]
First of all, I should announce I have searched Archives before I post this message, but not exactly match my question. Some people said for this topic you have to use BGP, and some people said you can use default route if you are only for load balance and fault tolerance purpose. We have one client, who currently uses T1 line (Cisco 2503 router) to an ISP, and has a whole class C ip address (/24) from the ISP. And on their local network, they have web server, mail server, etc. everything is working fine. Now they want to connect to us using SDSL line (Cisco 1605 router) for load balance and fault tolerance. How to do that? 1. Cannot use BGP, because nobody wants to buy a BGP router. 2. Static or default route: (1) HSRP groups implement load sharing, and automatically switching over in case of one line is down, is it right? (2) Because they are using T1 line ISP's IP address for local network, if T1 line is down, how can we route their traffic through DSL line, ip route 0.0.0.0 0.0.0.0 DSL_ISP will work? and from outside how people can reach their local network through DSL line? Thanks Shawn _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33870&t=33870 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CIPT 3.1 exam [7:34047]
Is it possible to pass CIPT 3.1 exam if we just study? I am very interested in it, but I don't have any VoIP environment. Also I heard that you have to take CVoice exam before you take CIPT exam, is it true? Shawn _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34047&t=34047 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Change memory [7:34294]
I never have a chance to open a Cisco router. Is it possible to change the DRAM of a Cisco router to make more? like we do for a PC. Shawn _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34294&t=34294 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How to route this ip traffic to pass through [7:34664]
Please see the attachment for the scenario. Let's say we are at ISP1, and our upstream is ISP2. We don't have our own IPs,in other words, we got all the ips from ISP2, and we have only static route to ISP2. Now, one client, they have their own public IP block, and they want to connect to ISP1, and use their own IPs. How to route the client's ip traffic to pass through ISP1 and ISP2? Thank you for your help. Shawn _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. [GroupStudy.com removed an attachment of type application/msword which had a name of ISPIssue.doc] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34664&t=34664 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
1605 New Flash Card Help [7:39438]
I recently got a new(new to me, but it is old in fact) flash card for my 1605 to upgrade it to 8MB, but I have trouble to get it working. Every time I try to copy tftp flash I get "%Error: No PCMCIA flash chip information available." I have tried the "format flash" command, which isn't available on my router. I've also tried "erase flash," which *seems* to work, but when I run "show flash", the same error: "%Error: No PCMCIA flash chip information available." All help will be appreciated. Shawn _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39438&t=39438 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco router 827 does not pick up automatically [7:39691]
I have a Cisco router 827 running fine, but one problem is that whenever the ISP is down or does something, the Internet connection is down. The 827 doesn't pick up the connection automatically when the ISP is back up, I have to manually reboot this router. After I reboot, then the connection is ok. How can we make the Router automatically pick up the connection ? Thanks Shawn _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39691&t=39691 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Can we do this? [7:39752]
I have a Cisco 1605 router, and I want to use it to do NAT and Access-list. E0 nat inside, and E1 nat outside, local network ip 172.16.1.0/24, and each ip for a web site on one machine, then can I do: ip nat inside source static 172.16.1.1 public-ip1 ip nat inside source static 172.16.1.2 public-ip2 ip nat inside source static 172.16.1.254 public-ip254 access-list 101 permit tcp any 172.16.1.0 0.0.0.255 eq www int e1 ip access-group 101 in I understand one port 80 to one ip like "access-list 101 permit tcp any host 172.16.1.2 eq www" which is working fine, but how about one port 80 to multiple IPs? Any idea will be appreciated! Shawn _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39752&t=39752 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
access-list problem [7:40092]
I want to use NAT and access-list to protect our web server with private ips 172.16.1.3 to .12 The following is the configuration file. If my web server ip is 172.16.1.3, then from outside I cannot get anything if I search pub_ip_3 If I added "access-list 101 permit tcp any any eq www", which is working fine. Can someone correct this problem? Also I know it is not good access list, especially icmp and telnet, I don't want to disable them, but what is good way to do it? Thank you very much Shawn ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname 1605 ! boot system flash c1600-sy.mz.120-9.bin no logging console enable secret 5 $1$iMHN$BUS2hInuqH0G5AvS4FHc1/ ! ip subnet-zero no ip source-route ip telnet source-interface Ethernet0 ip name-server name_server_ip ! snmp community public ro 5 ! ! interface Ethernet0 ip address 172.16.1.1 255.255.255.0 no ip redirects no ip directed-broadcast ip nat inside no shutdown no ip route-cache no ip mroute-cache ! interface Ethernet1 ip address pub_ip-1 255.255.255.0 no ip directed-broadcast ip nat outside no shutdown no ip route-cache no ip mroute-cache ip access-group 101 in ip access-group 102 out ! ip nat inside source list 99 interface Ethernet1 overload ip nat inside source static 172.16.1.3 pub_ip_3 ip nat inside source static 172.16.1.4 Pub_ip_4 ip nat inside source static 172.16.1.5 pub_ip_5 ip nat inside source static 172.16.1.6 pub_ip_6 ip nat inside source static 172.16.1.7 pub_ip_7 ip nat inside source static 172.16.1.8 pub_ip_8 ip nat inside source static 172.16.1.9 pub_ip_9 ip nat inside source static 172.16.1.10 pub_ip_10 ip nat inside source static 172.16.1.11 pub_ip_11 ip nat inside source static 172.16.1.12 pub_ip_12 ip classless ip route 0.0.0.0 0.0.0.0 gateway ! access-list 99 permit 172.16.1.0 0.0.0.255 !permit all redirects access-list 101 permit icmp any any redirect ! !permit ping access-list 101 permit icmp any any echo ! !stop localhost from going anywhere access-list 101 deny ip 127.0.0.0 0.255.255.255 any ! !stop multicast from going anywhere access-list 101 deny ip 224.0.0.0 31.255.255.255 any ! !stop 172.16.1.0/24 from getting to anything access-list 101 deny ip 172.16.1.0 0.0.0.255 any ! !permit telnet from anywhere access-list 101 permit tcp any any eq telnet ! !permit anything from established connection access-list 101 permit tcp any any established ! !permit anyone to 172.16.1.0 port 2121--ftp server access-list 101 permit tcp any 172.16.1.0 0.0.0.255 eq 2121 ! !permit external dns servers to go anywhere access-list 101 permit ip host dns_ip any access-list 101 permit ip host dns_ip any ! !permit anyone to 172.16.1.0 port 80--web server access-list 101 permit tcp any 172.16.1.0 0.0.0.255 eq www ! !permit terminal service access-list 101 permit tcp any 172.16.1.0 0.0.0.255 eq 3389 ! !permit web sites analysis monitoring for Azeb access-list 101 permit tcp any 172.16.1.0 0.0.0.255 eq 8080 ! !permit SNMP for traffic monitor access-list 101 permit udp any any eq 161 access-list 101 permit udp any any eq 162 ! !permit ping from local to anywhere access-list 101 permit icmp any any ! !Access-list 102 is for outgoing traffic, which means any packet !leaving my network has a source address from my net so that it !will prevent people from sending spoofed packets via my net. access-list 102 permit ip 172.16.1.0 0.0.0.255 any access-list 102 permit ip 66.x.x.0 0.0.0.255 any access-list 102 deny ip any any ! !access-list 5 is for SNMP and Telnet access-list 5 permit 66.x.x.0 0.0.0.255 ! _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40092&t=40092 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bandwidth Monitor [7:14155]
The small company I am working for is looking for a bandwidth monitor to monitor our each customer's bandwidth. We charge them based on how much bandwidth they have used each month. The company has a very limit bugit, so is looking for a free bandwidth monitor. Is there anybody knows, please help. Thank you so much. Shawn Xu _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14155&t=14155 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Bandwidth and Speed Concepts [7:17917]
Hi, Everyone: Sometimes I am stupid, I could not tell clearly from these two things: bandwidth and speed. For example, T1 connection, we know the speed is 1.544Mbps, that means this line can transfer 1.544 Mega bits per second, this is speed. But what is bandwidth? I am working on bandwidth monitor using MRTG saying Bits Per Second. My colleague said I don't need time, per second, I need just how many bits or packets, this is bandwidth. For bandwidth you can not use time system? Please help, thanks Shawn Xu _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=17917&t=17917 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco 827 ADSL Emergency Help [7:27945]
Hi, Who has Cisco 827 ADSL router experience, please help. This is a real emergency, not only today is Sunday I am still on the site to figure out what is going on here, but also the company complains too much because they can not remotely access. The problem is like this: After you reboot the 827, everything is working fine, all the interfaces are up, but you don't know how long it will last, sometimes a few of hours, sometimes one hour, sometimes maybe 5 to 6 hours, then no Internet. When you show interface at this time, all the inerfaces are still up except virtual-access1 line protocol which was down. Any idea? and is there anything related to my configuration file (please see the attached for the file)? Thank you so much in advance. Shawn Xu _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp sh run Building configuration... Current configuration : 2420 bytes ! version 12.1 no parser cache no service single-slot-reload-enable no service pad service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption ! hostname dethomas ! logging buffered 4096 debugging logging rate-limit console 10 except errors enable password 7 05585058741F1D51 ! username admin password 7 0255520C5E555C79 clock summer-time eastern recurring ip subnet-zero no ip finger ip domain-name golden.net ip name-server 199.166.210.2 ip name-server 199.166.210.5 ! ip dhcp pool CLIENT ! no ip bootp server no ip dhcp-client network-discovery vpdn enable no vpdn logging ! vpdn-group 1 request-dialin protocol pppoe ! ! ! ! interface Ethernet0 ip address 10.0.0.1 255.255.255.0 ip accounting output-packets ip nat inside no cdp enable ! interface ATM0 mtu 1492 no ip address no atm ilmi-keepalive atm ilmi-pvc-discovery pvc 0/35 protocol pppoe pppoe-client dial-pool-number 1 ! bundle-enable dsl operating-mode auto hold-queue 224 in ! interface Dialer1 mtu 1492 ip address negotiated ip nat outside encapsulation ppp ip tcp adjust-mss 1422 dialer pool 1 dialer-group 1 no cdp enable ppp authentication pap callin ppp pap sent-username [EMAIL PROTECTED] password 7 0601002D484B07 ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server ! ip nat inside source list 101 interface Dialer1 overload ip nat inside source static tcp 10.0.0.4 5631 209.183.136.31 5631 extendable ip nat inside source static tcp 10.0.0.9 443 209.183.136.31 443 extendable ip nat inside source static tcp 10.0.0.9 389 209.183.136.31 389 extendable ip nat inside source static tcp 10.0.0.9 709 209.183.136.31 709 extendable ip nat inside source static tcp 10.0.0.2 1433 209.183.136.31 1433 extendable ip nat inside source static tcp 10.0.0.2 710 209.183.136.31 710 extendable ip nat inside source static tcp 10.0.0.2 701 209.183.136.31 701 extendable ip nat inside source static tcp 10.0.0.2 700 209.183.136.31 700 extendable access-list 98 permit any access-list 101 permit ip 10.0.0.0 0.0.0.255 any no cdp run snmp-server engineID local 0009020196A499EB snmp-server community rescue RO 98 ! line con 0 exec-timeout 120 0 login local transport input none stopbits 1 line vty 0 4 access-class 98 in exec-timeout 0 0 password 7 15415D5B5179787C login local ! scheduler max-task-time 5000 end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27945&t=27945 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Off Topic: DNS Delegation Help [7:28910]
We are ISP to assign different ip blocks to our customers. After subnetting , one of our clients asks me to do "Reverse DNS Delegation" for his DNS. He owns his DNS and domain name which is not our subdomain. I think, in order to do DNS reverse delegation, the delegated domain must be a subdomain of our domain. For example, our domain is company.com, and their domain must be something like sales.company.com, but he is not our subdomain. Please help to clear the concept. Anyway, what I did is based on the attached, but it is still not working. Please help. Thank you very much in advance. Shawn Xu _ Send and receive Hotmail on your mobile device: http://mobile.msn.com [GroupStudy.com removed an attachment of type text/richtext which had a name of RevDnsGele.rtf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28910&t=28910 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hardware BGP [7:31459]
Hi, All: I never had chance to do BGP stuff before. My question is : In order to do BGP, what we need? just software as long as we have IOS version x? or only some routers can do BGP? Cisco router 1605 can do BGP? Thank you so much. Shawn Xu _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31459&t=31459 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hardware BGP? [7:31529]
Hi, All: Which Cisco router can run BGP? Cisco 1605 can do it? I never had BGP experience, and I think it depends on IOS version, not hardware. Please help. Thanks. Shawn _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31529&t=31529 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BGP AS Number [7:32107]
As far as we know, when you connect to two ISPs for load balancing and fault tolerance, you have to configure BGP, please refer http://www.cisco.com/warp/public/459/40.html but from the above examples, you have to have your own AS number. If I don't have my own AS number, I can not connect to two ISPs? Please help, thanks. Shawn Xu _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32107&t=32107 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BGP AS Number [7:32107 ]----John and Eric [7:32164]
Hi, John and Eric: Thank you both for your help. I don't have BGP experience, and I will check the book Eric recommended. We have T1 connection to an ISP using Cisco router 2503 with 207.x.x.x/24 ip addresses, now we also want to connect to another ISP (SDSL line) for load balancing and fault tolerance using Cisco 1605 with 66.x.x.x/29 IPs (or I have more). My questions: 1. As John said, we have to apply for our own AS number? 2. Cisco router 1605 can do BGP? 3. What ip is local clients' default gateway? because for 2503 ip is 207.x.x.x, and for 1605 ip is 66.x.x.x or 1605 connecting to local network interface must use 207.x.x.x ip, even though what is default gateway without HSRP for automatically switching over in any case one line is down? Also we have web server and mail server on our network, how to configure DNS to point to right path? Thanks, please help. Shawn >From: "Eric" >Reply-To: "Eric" >To: [EMAIL PROTECTED] >Subject: Re: BGP AS Number [7:32107] >Date: Wed, 16 Jan 2002 00:36:26 -0500 > >IMHO - You will need at least a /21 as some ISP's set policies that will >filter anything less. > >Best bet is to pick up a copy of: Internet Routing Architectures, Second >Edition. ISBN# 1-57870-233-X. > >This book will also introduce you to the third item to consider when >connecting to two ISP's: Symmetry. > >Regards, >Eric > >- Original Message - >From: "John Neiberger" >To: >Sent: Tuesday, January 15, 2002 7:37 PM >Subject: Re: BGP AS Number [7:32107] > > > > To make connections to separate ISPs work, you need to have > > some address space assigned to you that is large enough to be > > routed successfully. This generally means that you have to > > have at least a /24 prefix. > > > > Once you've successfully gotten that address space from one of > > your providers you can apply at www.arin.net to get an ASN. > > > > If you were only considering multiple connections to the same > > ISP one option would be to use a private ASN, or you might not > > need to use BGP at all. > > > > However, to do what you're considering, you need to have your > > own ASN and address space. > > > > Also, for the nitpickersI'm being overly general on > > purpose. This can get to be much more complicated if you want > > it to be. :-) > > > > HTH, > > John > > > > > > > > Get your own "800" number > > Voicemail, fax, email, and a lot more > > http://www.ureach.com/reg/tag > > > > > > On Tue, 15 Jan 2002, Shawn Xu ([EMAIL PROTECTED]) > > wrote: > > > > > As far as we know, when you connect to two ISPs for load > > balancing and > > > fault > > > tolerance, you have to configure BGP, please refer > > > > > > http://www.cisco.com/warp/public/459/40.html > > > > > > but from the above examples, you have to have your own AS > > number. If I > > > don't > > > have my own AS number, I can not connect to two ISPs? > > > > > > Please help, thanks. > > > > > > Shawn Xu > > > > > > > > > > _ > > > MSN Photos is the easiest way to share and print your photos: > > > http://photos.msn.com/support/worldwide.aspx > > [EMAIL PROTECTED] _ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32164&t=32164 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CVoice exam practice questions [7:33039]
Does anybody know a web site that has free CVoice exam practice questions? like http://www.examcram.com/insider/66/news.asp does, but this site does include CVoice exam. Any info will be appreciated. Shawn Xu _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33039&t=33039 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Any Cisco Teaching Certificate [7:65322]
I am holding CCNP certificate. Recently I am interested in teaching Cisco router and switch stuff. Do I need any Cisco teaching certificate? Shawn _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65322&t=65322 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Console problem [7:62179]
I have a strange problem or serious problem. I configured a Cisco 1605R router which was configured before. This time, I only changed E0 and E1 ip address, and default route through the console. After that, I put it into the server room, booted it up, but I couldn't ping the interfaces. I thought maybe the interfaces were not up, I should run "no shutdown" command. I took it back to the office, connected the console port to the com1, but it never comes back. It is dead. It can not boot. Nothing shows in Hyper Terminal. Maybe one time of ten times of reboot just shows @ . That is all. Note: console cable, com1, and Hyper terminal are working fine. Any ideas? Thanks Shawn _ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62179&t=62179 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Latest Cisco PIX? [7:73084]
Hi, I heard Cisco has PIX 560. However, I couldn't find Cisco PIX 560 from www.cisco.com. The latest one is PIX 535. Is it right? Thanks Shawn Xu _ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73084&t=73084 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX OS 4.2 to 6.3 [7:73354]
We have cisco PIX 520 with OS 4.2. Now we want to buy Cisco PIX 535 with OS 6.3. Can I just import PIX 520 configuration file to PIX 535 without changing anything? Then later on we will add more functions. Thanks Shawn _ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73354&t=73354 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
