Cisco vs HP 3L Switch [7:74039]
Dear All, I configured hp 5304XL and seem to be not work, can any one help take a look my config whether is correct, please...!! Thanks Running configuration: ; J4850A Configuration Editor; Created on release #E.07.27 hostname pa_hp5304xl cdp run module 2 type J4820A module 1 type J4878A ip default-gateway 0.0.0.0 ip routing snmp-server community public Unrestricted vlan 1 name DEFAULT_VLAN untagged A1-A4,B4-B24 no ip address no untagged B1-B3 exit vlan 18 name vlan18 ip address 192.168.18.200 255.255.255.0 tagged B1-B3,B13,B19 exit vlan 28 name vlan28 ip address 192.168.28.200 255.255.255.0 tagged B1-B3,B14,B20 exit vlan 38 name vlan38 ip address 192.168.38.200 255.255.255.0 tagged B1-B3,B15,B21 exit gvrp router rip default-metric 1 exit vlan 18 ip rip exit vlan 28 ip rip exit vlan 38 ip rip exit password manager password operator Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=74039t=74039 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Can Not Router on 3550 [7:72462]
Dear All, I congifured a simple L3 routing on my 3550-EMI, but seem like not working. Any help? Thanks == Current configuration : 6579 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname LOL-3550 ! enable password cisco ! ip subnet-zero ip routing ! ! spanning-tree extend system-id ! ! ! interface FastEthernet0/1 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/2 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/3 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/4 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/5 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/6 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/7 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/8 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/9 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/10 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/11 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/12 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/13 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/14 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/15 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/16 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/17 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/18 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/19 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/20 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/21 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/22 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/23 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/24 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/25 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/26 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/27 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/28 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/29 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/30 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/31 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/32 switchport access vlan 3 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/33 switchport access vlan 2 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/34 switchport access vlan 2 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/35 switchport access vlan 2 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/36 switchport access vlan 2 switchport mode access no ip address spanning-tree portfast trunk ! interface FastEthernet0/37 switchport access vlan 2 switchport mode access no ip address spanning-tree portfast trunk !
How can I deferent software feature set [7:70242]
Hello Team, How can I deferent between this two software feature set? Please advice...Thanks IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(13)T1, RELEASE SOFTWARE (fc1) IOS (tm) C1700 Software (C1710-K9O3SY-M), Version 12.2(4)YA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Rgds, Seiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=70242t=70242 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
URL for Warranty Status Check [7:69970]
Dear Team, I lost the URL for product warranty status at www.cisco.com anyone can help? Thanks Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=69970t=69970 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Visio Stencil [7:65281]
Hi, I'm trying search the visio stencil on cisco website and can't find it. Any idea? :-) Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=65281t=65281 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question [7:64878]
Hey Guys, Can anyone please help answer just few question for my assigment? Thanks 1) what is the difference of ethernet 2 and ethernet SNAP frames ? 2) how a token ring topology works (explanation of active and standby monitor} ? 3) what is the difference between token ring and ethernet csma/cd ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=64878t=64878 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Urgent Help !! How to check who's always attack my firewall [7:64064]
Dear All, I believe some one always try hacking my private network, I got the ip address and how am I check who they are? Please help...!! Thanks Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=64064t=64064 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Urgent Help !! How to check who's always attack my firewall [7:64063]
Dear All, I believe some one always try hacking my private network, I got the ip address and how am I check who they are? Please help...!! Thanks Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=64063t=64063 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Looking for Used Cisco Equip's [7:64044]
Dear Groups, I'm looking below used cisco item, please look in to it and let me know asap. My location is Malaysia. Thanks * * Catalyst 4000 Chassis (6-Slot),Suprvsr II,(2)AC PS, Fans Catalyst 4000 10/100 Auto Module, 48-Ports (RJ-45) WAN Switch Catalyst 6000 8 Port Gig Ethernet Module Catalyst supervisor engine 1A + MSFC (for dist backbone) Catalyst 6509 Chassis AC Power Supply (3rd) Catalyst 6000 Supervisor Engine 1, 2 GE (for campus switch) Software for MFSC Catalyst 6000 1300W Power Supply Catalyst 6000 1300W Second Power Supply Catalyst 6000 48 Port 10/100 RJ-45 Module (Backbone switch) 1000BASE-LX Long Wavelength GBIC (MM Only) Catalyst 4000 Chassis (6-Slot),Suprvsr II,(2)AC PS, Fans Catalyst 6000 48 Port 10/100 RJ-45 Module 1000BASE-SX Short Wavelength GBIC (MM Only) 1000BASE-LX Long Haul GBIC (SM/MM) Catalyst 6509 Chassis Catalyst 6000 8 Port Gig Ethernet Module Catalyst 6000 Agent License Catalyst 4000 10/100 Auto Module, 48-Ports (RJ-45) 1000BASE-SX Short Wavelength GBIC (Multimode only) Catalyst 6000 1300W Power Supply Catalyst 6000 1300W Second Power Supply Catalyst 4000 Gigabit Ethernet Module, 6-Ports (GBIC) Catalyst 4000 Gigabit Ethernet Module, 6-Ports (GBIC) Catalyst 6000 Supervisor PCMCIA Flash Memory Card, 24MB Option AC Power Supply (3rd) 1000BASE-SX Short Wavelength GBIC (MM Only) Catalyst 6000 Supervisor PCMCIA Flash Memory Card, 24MB Option PROGRAM MGT Installation Medium WAN router 8-p OC3/STM-1 Module: 16k cons, 230k/230k 8-P T3 Module; 15k 32k cons, 100k/100k cell buff 4 port OC3 multimode ATM line card Cisco12012 GSR 60Gbps;1GRP,1CSC,3SFC,1DC GSR12000 single port Gigabit Ethernet line card Universal Frame Relay Card (8 Ports)] Catalyst 8540 Campus Switch Router (CSR) Chassis Universal Frame Relay Card (8 Ports One IGX-UXM with one BC-UAI-6-T3 BPX8620, 15-slot: Includes BCC-4V, BCC-3-BC, ASM-BC Cisco 7513 13-Slot, 2 CyBus, 1 RSP2, 1 AC Supply Redundant BCC 20GBps w/128M DRAM 4MB DRAM Catalyst 8540 16-port 10/100 Fiber Card IGX 8420 16-slot Chassis, Rack Mount Catalyst 8540 CSR Switch Process 2 Port E3 Serial Port Adapter with E3 DSUs Small WAN router ATM Interface, SONET/SDH Multimode, 155 Mbps 2-Port Fast Ethernet Interface Processor (100FX) RSP1/RSP2 IOS Enterprise/Encryption 56 Feature Set Catalyst 8540 CSR Switch Processor - Installed 12-port F. Etherchannel 100BaseFX Catalyst 4000 FE Switching Module, 24- 100FX (MTRJ) Catalyst 8540 16-Port 10/100-RJ45 (16K) 2-Port Fast Ethernet Interface Processor (100TX) Cisco 12012 GSR Redundant AC Supplies (4 AC Supplies) Cisco 6348 building distribution switch (48-port copper) Virtual Trunking license per node Redundant IGX Network Processor Module 64 MB, Model B Universal Frame Relay Module - Unchannelized Catalyst 8540 16-port 10/100 RJ-45 Card AC Power Option 3- Redundant Supplies/Redundant AC Line inputg Versatile Interface Processor-2, model 40 5002/5000/5500 Supervisor Engine II FX - MMF Catalyst 5002/5000/5505/5500 Supervisor II (100BaseFX, MMF) ACL daugter card Catalyst 8540 CSR Route Processor - Installed Cisco 6408 campus distribution switch (8-port fiber) Catalyst 6509 Chassis Cisco 12012 Redundant GSR Scheduler/Fabric Cisco 12000 Series GSR Base System Software Universal Frame Relay Module - Unchannelized Catalyst 6509 Chassis 256MB GRP and L.C. Program/Route Memory (2x128MB) Cisco 7513 Dual AC Power Supply Option 1-Port ATM Enhanced OC3c/STM1 Multimode Port Adapter 8-Port Serial, V.35 Port Adapter 7200VXR NPE-300 w/ 32MB base mem + 128 MB extra mem 24 Port UTP 10/100 Switching Module C8540 Chassis Cisco7206VXR, 6-slotChassis, 1AC Supply w/IP Software Cisco 3600 4-slot Modular Router-AC with IP Software Catalyst 8540 2 Port GE (16K) - installed Integrated Services Adapter for IPSec or MPPE encryption 24 Port 10/100TX Backbone Switching (FEC, 802.1Q/ISL, RJ-45) 8-p OC3/STM-1 Multi Mode Fiber Back Card (up to 2km span Multi User configuration sessions per node :[Upgrade of NPM-32 to NPM -64 when ordered with Package] ForeSight License for each UFM Catalyst 8540 CSR Redundant Power Supply -AC installed 256MB Memory for NPE-300 in 7200 Series C8540 Power Supply - AC C8540 Redundant Power Supply - AC 5500 AC Power Supply 5500 Chassis 128MB GRP and L.C.Program/Route Memory (1x128MB) Cisco7200 Input/Output Controller with Fast Ethernet Port 1-Port Fast Ethernet 100BaseFx Port Adapter Cisco7200 Dual AC Power Supply Option, 280W Cisco 7200 Series IOS ENTERPRISE 1-Port Fast Ethernet 100BaseTx Port Adapter DES/3DES VPN Encryption NM for 3620/3640 2 Ethernet 2 WAN Card Slot Network Module Universal T3/E3 Back Card, SMB Connectors Configuration Save and Restore License per node STRATM-Cabinet UFM-U Back Card 12V35 Ports UFM Back Card, 8 T1 Ports w/DB15 Connectors Multi-User Configuration Sessions] 32 to-64 MB DRAM Factory Upgrade for the Cisco 3620 Line Card Buffer Memory,32MB/32MB (Tx/Rx) :[UFM-U Back Card, 12V35 Ports UFM Back Card, 8 T1
Re: Strange problem with a 2924XL. [7:63680]
Hi All, Can the set spantree port-fast solve this issue? Steiven - Original Message - From: The Long and Winding Road To: Sent: Tuesday, February 25, 2003 3:20 PM Subject: Re: Strange problem with a 2924XL. [7:63680] Ken Diliberto wrote in message news:[EMAIL PROTECTED] I had a strange problem this evening with a 2924XL. The server attached to port f0/13 had been generating errors and finally the switch stopped talking to it. A shut/no shut combination started everything back up again. The configuration only says to send a trap when a broadcast storm happens. There isn't anything about excessive errors. Any thoughts? I haven't checked CCO. I don't have a good idea what to search for without getting 10,000,000,000 hits. what is the exact configuration line used? the documentation talks about default rising and falling thresholds. of course it does not indicate whether or not the default is to shutdown or not. http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc3/cref/cl icmds.htm#xtocid51 Thanks. Ken Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=63704t=63680 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco over Madge Token Ring [7:63549]
Dear Group, I have a unit Madge LET36 Chassis with Token Ring Module LTR108F(Fiber) connected to IBM Mainframe 390 and this is the only token ring running in the network. The question here is, if this unit down what is the equivalent product I can replace? Please advice Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=63549t=63549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switch Port Healthy [7:62567]
Hi Group, This port is connected to my 2600 router, can anyone comment whether the bandwidth is healthy? Thanks FastEthernet0/48 is up, line protocol is up Hardware is Fast Ethernet, address is 000a.f477.662c (bia 000a.f477.662c) MTU 1500 bytes, BW 1 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 2/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 10Mb/s input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:06, output 00:00:00, output hang never Last clearing of show interface counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 82000 bits/sec, 19 packets/sec 5 minute output rate 52000 bits/sec, 55 packets/sec 76531109 packets input, 2985431130 bytes, 0 no buffer Received 4019174 broadcasts, 4440080 runts, 0 giants, 0 throttles 4440080 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 986257 multicast, 0 pause input 0 input packets with dribble condition detected 139742667 packets output, 3729299934 bytes, 2417684 underruns 0 output errors, 1999663 collisions, 1 interface resets 0 babbles, 0 late collision, 513798 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 2417684 output buffer failures, 0 output buffers swapped out Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=62567t=62567 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
WLAN Bridge [7:62555]
Hi All, I have two building linked up with WLAN Bridge 350, the question is how to block the DHCP of plant 2 reach Plant 1. Currently P1 DHCP goto P2 and P2 DHCP goto P1. Please HELP. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=62555t=62555 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
How Much This User Router [7:61939]
Can any one tell me how much below used router and a brand new unit? Thanks Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-IS40-L), Version 11.3(11b), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Fri 02-Mar-01 18:47 by cmong Image text-base: 0x030383FC, data-base: 0x1000 ROM: System Bootstrap, Version 11.0(10c), SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) LOCUG uptime is 2 minutes System restarted by power-on System image file is flash:c2500-is40-l.113-11b.bin, booted via flash cisco 2511 (68030) processor (revision M) with 2048K/2048K bytes of memory. Processor board ID 10297453, with hardware revision Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 16 terminal line(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=61939t=61939 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Collision [7:59590]
Dear All, My network have collision is this good sign?? Please help!!! FastEthernet0/48 is up, line protocol is up Hardware is Fast Ethernet, address is 000a.f477.662c (bia 000a.f477.662c) MTU 1500 bytes, BW 1 Kbit, DLY 1000 usec, reliability 250/255, txload 5/255, rxload 9/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Half-duplex, 10Mb/s input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:16, output 00:00:00, output hang never Last clearing of show interface counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 36 bits/sec, 73 packets/sec 5 minute output rate 227000 bits/sec, 51 packets/sec 1363328 packets input, 543353391 bytes, 0 no buffer Received 35975 broadcasts, 234208 runts, 0 giants, 0 throttles 234208 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9715 multicast, 0 pause input 0 input packets with dribble condition detected 19819113 packets output, 2197938874 bytes, 2308379 underruns 0 output errors, 127070 collisions, 1 interface resets 0 babbles, 0 late collision, 11950 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 2308379 output buffer failures, 0 output buffers swapped out Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=59590t=59590 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Visio Stencil for Cisco [7:58509]
Dear All, I can't remember where the url to download the Cisco Visio Stencil that I have done before, can anyone please recall and let me know, Thanks in advance :) Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58509t=58509 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Port Address Translation [7:57485]
Dear All, Any body know what is the PAT for TCP/IP printing? Please advice thanks... Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57485t=57485 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Aironet 350 MetalCase Bridge [7:54214]
Hi John, I'm not sure whether using Key rotation, please advice where I can apply the LEAP? Please advice as I'm having trouble on this issue. Once again, Thanks Rgds, Steiven - Original Message - From: John Jackson To: Sent: Thursday, September 26, 2002 9:30 PM Subject: RE: Aironet 350 MetalCase Bridge [7:54214] I had this same problem. Are you using Key rotation without LEAP? That is what my problem was. Now, it is my understanding that key rotation only works when you also do LEAP. Steiven Poh-\(Linear Online Mai wrote: Dear All, Currently, I already can establish communications between the two bridges. However , now we are facing some problems - the bridges seem to deauthenticate after the connection was being established after a period of 1 to 2 minutes. And follow with reauthentication and reassociation. The is scenaria keep looping ... Please advise on what resolution can be taken to overcome this problem. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=54427t=54214 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
URGENT Cisco 2511 for SALES [7:52881]
Dear All, Those intrested above used router, please contact me ASAP. Thanks Rgds, Steiven Poh Penang, Malaysia Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52881t=52881 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router Error [7:51347]
Dear All, Could anyone advice below error msg, I have test the cable seem to be ok? Thanks... 01:47:36: %LANCE-3-BADCABLE: Unit 0, Transmits stalled. Check ethernet cable connection Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=51347t=51347 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN though ISDN BRI [7:42719]
Guys, I have a EICON DIVA LAN ISDN BRI Modem (http://www.eicon.com/worldwide/products/ISDN/divalan.htm) dial-up to internet and all my workstation are able to surf net. But once I secure the VPN connectivity to my HQ on every workstation, the local and destination LAN was lost. If I by pass above device and use single workstation attached modem, is work and I'm able to connect to my HQ. Question:- This device may not cater for multiple VPN client and what other solution I can implement to solve above issue. I already have the ISDN BRI dial-up line and my HQ is using Concentrator 3000. Thanks for HELP. Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=42719t=42719 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dial on Demand configuration to ISP [7:29867]
Hi Folks, Do you guys have Dial on Demand configuration to ISP using Asyn Port ( 2511 Series )? Thanks Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=29867t=29867 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cisco Study group in Dubai [7:27758]
Folks, I'm going to forming study group in Penang, Malaysia..!!! Cheer, Steiven - Original Message - From: Naveen To: Sent: Friday, November 30, 2001 11:45 AM Subject: cisco Study group in Dubai [7:27758] Dear friends, Please contact me for forming study group in Dubai, UAE. Kind regards Naveen Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=27773t=27758 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Queston about Aironet !!! [7:23691]
Hi Folks, Question : 1. What is the transmision rate in Mbs againts distance, meaning that if you are the only user on the AP will the data transfer rate degrade when you are getting far away from the AP. 2. What is the max distance from AP to workstation. 3. If your server is runing DHCP, AP set to be static, will the cleint be able to get dynamic IP. 4. Is there any integration between the Aironet systems with the barcode wireless systems which is also Aironet(2Mbps). 5. How to explain on the Beacon receive show on the Aironet program when we perform signal strength monitoring. Which the signal strength degrade againts distance and the beacon tend to be on 100%. Looking forward for your reply Thanks Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23691t=23691 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Sniffer Pro for Win2K [7:22175]
Can I have the full URL on this? Thanks... - Original Message - From: EA Louie To: Sent: Friday, October 05, 2001 1:10 PM Subject: Re: Sniffer Pro for Win2K [7:22175] try clicking on Product Evaluations at http://www.sniffer.com/default.asp - they might be offering 30 day timed eval copies there - Original Message - From: Steiven Poh-(Jaring MailBox) To: Sent: Thursday, October 04, 2001 9:10 PM Subject: Sniffer Pro for Win2K [7:22175] Hello Folks, Did anybody know where I can download Sniffer Pro for Win2K...demo version or either... :) Rgds, Steiven _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=22192t=22175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Sniffer Pro for Win2K [7:22175]
Hello Hugh and Matthew...for your information. - Original Message - From: George Murphy CCNP, CCDP To: Steiven Poh-(Jaring MailBox) Cc: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Friday, October 05, 2001 1:57 PM Subject: Re: Sniffer Pro for Win2K [7:22175] I tried to demo it which requires registration and no one has ever called me back. Maybe they dont need my business ;-) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=22191t=22175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Sniffer Pro for Win2K [7:22175]
Hello Folks, Did anybody know where I can download Sniffer Pro for Win2K...demo version or either... :) Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=22175t=22175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Aironet vs Lucent ORiNOCO [7:20954]
Is both work with Linux OS? Steiven - Original Message - From: netman To: Sent: Tuesday, September 25, 2001 8:21 PM Subject: Re: Cisco Aironet vs Lucent ORiNOCO [7:20954] I don't know about the Lucent stuff, but I installed some Cisco Aironet 340 series equipment last summer (99), and I have not had one trouble call at all. These are used constantly for classes and haven't had one probem. In fact I almost forgot we had them installed. You can't beat that :-) Donman - Original Message - From: Steiven Poh-(Jaring MailBox) To: Sent: Monday, September 24, 2001 9:25 PM Subject: Cisco Aironet vs Lucent ORiNOCO [7:20954] Hello Folks, Any one got idea about above comparison? Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20993t=20954 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Wireless Network [7:20950]
Hi Folks, Anybody know where I can get a comparison chart for wireless network? Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20950t=20950 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Aironet vs Lucent ORiNOCO [7:20954]
Hello Folks, Any one got idea about above comparison? Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20954t=20954 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
equipments to sell. [7:14115]
I have below equipments to sell. All in good working condition. 1) 12 Port 3Com Hub (3C16670) - Used but Life Time Warranty 2) 12 Port 3Com Management Hub (3C16271) - Used but Life Time Warranty 3) 12 Port D-Link Hub (DE-812TP+) - New Unit 4) Eicon DIVA T/A ISDN 128K Modem (U interface) - Used but still have 3 Year Warranty 5) US Robotics DataBurst ISDN 128K Modem (U Interface) - New Unit Life Time Warranty 6) Cisco Router 2511 1-port Ethernet; 2-port sync serial; 16-port async - c/with 4MB Memory; 8MB Flash. Don't have any cable's Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14115t=14115 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router for SALES [7:13731]
Hi, I have a unit Cisco 2511 Router c/w 4MB RAM; 8MB Flash for sales, please contact me for further details! Regards, Steiven Poh Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13731t=13731 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Problem On PIX Hardware [7:12084]
Hello Cisco Folks, The problem that we face is a lot unusual. We are successfully configured the PIX with Cicso Secure ACS software on the server and have created some user ID on the software for the authentication to access to internet through proxy server. The good thing is it can immediately ask for the authentication when first time to access to internet. But when we successfully login it, the next PC to access to internet, It doesn't ask for any authentication. Just straight away can access to internet. But after the Time-out period on the PIX, it will ask again for the authentication. Looks like once first ID have been logged in, the rest of the user can go in smoothly without any authentication. This is not logic at all. I'm not sure wether the problem is occured due to the Cisco Secure ACS software of the PIX hardware. Any Advice? Rgds, Steiven Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12084t=12084 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Console Cable for very old 2900 series Cisco switches [7:10385]
Hi Tony, HmmmWhen you are doing console from you laptop, did you using 9pin female converter (Label as TERMINAL)? Same thing's I guess you need a 25pin male converter (Label as TERMINAL)? or some expert here may teach us self make rs232 :) - Original Message - From: Tony Zhu To: 'Steiven Poh - Jaring Mailbox' Sent: Friday, June 29, 2001 3:26 PM Subject: RE: Console Cable for very old 2900 series Cisco switches [7:10375] Steiven, Thanks for the quick response. Yes it is a 25 pin female console port. Is that mean that I could just use the normal Cisco console cable with a male-to-male converter? Or I need something special? Kind Regards, Tony Zhu WAN/LAN Communication Specialist Unisys Payment Services Limited (UPSL) ABN 70 008 408 231 ph:02 92098804 fax: 02 92098809 email: [EMAIL PROTECTED] -Original Message- From: Steiven Poh - Jaring Mailbox [mailto:[EMAIL PROTECTED]] Sent: Friday, 29 June 2001 4:44 PM To: Tony Zhu Subject: Re: Console Cable for very old 2900 series Cisco switches [7:10375] Is that a 25pin console port? If so, I think you need a converter from RJ45 to RS232 FemaleI guess so ;) - Original Message - From: Tony Zhu To: Sent: Friday, June 29, 2001 1:39 PM Subject: Console Cable for very old 2900 series Cisco switches [7:10375] Would anyone know what kind of console cable required for very old 2900 series cisco switches? How could I make one if I have to? I got a spare one here with 14 100MB ports, but its console port is not a usual cisco one. Thanks in advance. Tony Zhu Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10385t=10385 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Simulation Exam [7:10386]
Hi Folks, Any one know where I can get CCNA Simulation Exam Software for FREE? :) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10386t=10386 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router for SALE [7:10246]
Dear Group, I have one unit 2511 for sales, please contact me for further details! Thanks. Thanks and Best Regards, Steiven Poh Ciscom Systems TEL : 6 04 828 1584 FAX : 6 04 828 1584 MOBILE PHONE : 6 012 489 0861 == E-mail Account :- Maxis MailBox - [EMAIL PROTECTED] ICQ Number - 1221131 Yahoo Messenger - lppoh == Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10246t=10246 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Error when Booting up [7:9614]
Folks, I'm having below error when booting up my router, any advice? System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by cisco Systems 2500 processor with 2048 Kbytes of main memory %SYS-4-CONFIG_NEWER: Configurations from version 11.1 may not be correctly understood. No usable interfaces System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by cisco Systems 2500 processor with 2048 Kbytes of main memory Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x0101, data-base: 0x1000 cisco 2511 (68030) processor (revision M) with 2048K/2048K bytes of memory. Processor board ID 10297453, with hardware revision X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 16 terminal lines. 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Press RETURN to get started! Router(boot) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9614t=9614 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: very urgent [7:9353]
You can get the sample config on cisco web site... Thanks Steiven Poh - Original Message - From: Muhammad Tariq To: Sent: Thursday, June 21, 2001 11:29 PM Subject: very urgent [7:9353] Hello guys, I'm planning to setup VOIP facility within my company network but my company only have PBX at H/O while there is no PBX available on all 4 remote sites. So for VOIP setup can I use EM interface at central site and FXS port on all the remote sites?. Can I hv a sample config on this scenario. Anxiously waiting for input.Thanks and warm regards. Tariq Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9376t=9353 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: administrator password problem [7:8913]
any suggested site? - Original Message - From: [EMAIL PROTECTED] (Timothy Ouellette) To: Sent: Monday, June 18, 2001 11:27 AM Subject: Re: administrator password problem [7:8913] If you do a search on a security related site you can find a tool to dump the SAM database in NT and then you will be able to retrieve the administrator password. On 17 Jun 2001 23:18:34 -0400, [EMAIL PROTECTED] (parky chan) wrote: Dear all Expert can you help me solve this problem? if i don't know the administrator password (N.T.) but i need to use admin right to do something what can i do? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=8918t=8913 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
