Hi Group,
This port is connected to my 2600 router, can anyone comment whether the
bandwidth is healthy? Thanks
FastEthernet0/48 is up, line protocol is up
Hardware is Fast Ethernet, address is 000a.f477.662c (bia 000a.f477.662c)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 2/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 10Mb/s
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:06, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 82000 bits/sec, 19 packets/sec
5 minute output rate 52000 bits/sec, 55 packets/sec
76531109 packets input, 2985431130 bytes, 0 no buffer
Received 4019174 broadcasts, 4440080 runts, 0 giants, 0 throttles
4440080 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 986257 multicast, 0 pause input
0 input packets with dribble condition detected
139742667 packets output, 3729299934 bytes, 2417684 underruns
0 output errors, 1999663 collisions, 1 interface resets
0 babbles, 0 late collision, 513798 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
2417684 output buffer failures, 0 output buffers swapped out
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62567&t=62567
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
