MPLS for CCIE [7:71132]
Hi Can you suggest me some URL / Books on MPLS for Preparing for CCIE Written Exam. Do you need to know MPLS as a technology or required to configure MPLS based Network / VPN... as I dont have access to equipments supporting MPLSso no hand-on would be possible for me at this moment.. Thanks Swapnil Shah Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71142&t=71132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MPLS for CCIE [7:71132]
Hi Can you suggest me some URL / Books on MPLS for Preparing for CCIE Written Exam. Do you need to know MPLS as a technology or required to configure MPLS based Network / VPN... as I dont have access to equipments supporting MPLSso no hand-on would be possible for me at this moment.. Thanks Swapnil Shah Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71132&t=71132 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Depth of study required for CCIE Written [7:70246]
Dear All I am planning to take my CCIE written exams in near future. I have a few queries regarding the depth of knowledge required for the written exams on certain topics. 1. ATM -->> Do they go on for asking on config of ATM on Cisco ATM switches or focus is on using ATM as a layer 2 tech. and configuring the routers to use ATM VC's 2. All Tpoics covered under Multiservice in CCIE Blueprint i.e Voice/Video (H323) codecs SS7 RTP RTCP SIP MPLS As few of this topic requires a five day course in itself esp MPLS I would also like to know any good reference material for following topics covered under WAN WAN 1. ISDN (LAPD, BRI/PRI framing, signaling, mapping, NI1s, dialer map, interface types, B/D channel, channel bonding) 2. Frame Relay (LMIs, DLCI, PVC, framing, traffic shaping, FECN, BECN, CIR, DE, Mapping, compression) 3. X.25 (addressing, routing, LAPB, error control/recovery, windowing, signaling, mapping, SVC/PVC, Protocol Translation) 4. ATM (PVC/SVC, AAL, SSCOP, UNI/NNI, ILMI, Cell format, QoS, RFC 1483, PNNI, mapping) 5. Physical Layer (Synchronization, SONET, T1, E1, encoding) 6. Leased Line Protocols (HDLC, PPP, Async & modems, compression) 7. PoS 8. DPT/SRP Your feedback on same would be really helpfull. Regards Swapnil Shah Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70246&t=70246 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN PRI NailedUp [7:57555]
Dear Cisco Pals, I have configured Cisco3661 with E1/PRI Balanced Network modules for dial in connection from remote users using ISDN TA from a windows PC. Everything is working fine. Now I have to convert the dialup to leasedline (I mean ISDN leased line or an ISDN nailed up connection). The TA at remote user supports nailed up isdn (Zyxel Omni net plus). What configuration changes I have to have at the 3661 side kindly let me know. The Telecom guys have nailed up the channels as required. I have searched cisco.com but could not find much on it. Anybody who have done it could help me more. -- Regards Swapnil Jain CNE,MCSE,CCNA,CCDA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57555&t=57555 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX questions [7:37129]
u dont need to add a conduit for telnet unless u have blocked port 23. just add telnet ip_address [netmask] [if_name] to allow telnet from ip_address bye swapnil ""Hunt Lee"" wrote in message news:[EMAIL PROTECTED].; > Hi all, > > I have two questions about PIX 501, it would be great if someone can shed > some light on this: > > 1)Currently, I'm using a software called RANCID to monitor and save > configs for my works' routers.I know that RANCID uses a Clogin to get into > the router, it then do a show running-config command to veiw the configs, > and then backs it up. > My question is, would PIX 501 supports Clogin? > > 2)Also, I know one can use "conduit permit icmp any any" to allow the > PING packets to get thru the PIX. Would I be able to use a similar command > which will allow me to telnet from "outside network" into the PIX? > > Please help... > > Best Regards, > Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37131&t=37129 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ip wccp [7:35723]
Dear kaushalender, go thru the following link. this may help you. http://www.spc.org.nc/it/TechHead/Wccp-squid.html goog luck swapnil jain ""kaushalender"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi group > I have 2610 router in which i have configured the wccp .The problem is > that My squid is no accepting the wccp packet it says gre-proto-encap > 0x88e >.Can some buddy help me on this .Plz help > > thanx > kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35727&t=35723 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: *** VPN IPSec Client *** Urgent Please reply [7:29271]
thanks a lot George. I found here a lot about security. swapnil ""George Murphy CCNP, CCDP"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Swapnil, I would defintely go to the cisco site for this one. Use this > link. It should have examples and there may very well be an example > close to what you are seeking. > > http://www.cisco.com/warp/public/707/index.shtml#pix > > Swapnil Jain wrote: > > >Hi, > > > > I have to configure Cisco 801 with IP/Fw plus IPSec feature pack as a VPN > >client for PIX 6.0 What details and information do I need from the PIX side > >to configure 801. > > > >Swapnil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29282&t=29271 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
*** VPN IPSec Client *** Urgent Please reply [7:29271]
Hi, I have to configure Cisco 801 with IP/Fw plus IPSec feature pack as a VPN client for PIX 6.0 What details and information do I need from the PIX side to configure 801. Swapnil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29271&t=29271 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN IPSec client [7:29172]
Hi, I have to configure Cisco 801 with IP/Fw plus IPSec feature pack as a VPN client for PIX 6.0 What details and information do I need from the PIX side to configure 801. Swapnil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29172&t=29172 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Analog and Digital Calls on 2610 [7:23101]
nobody to answer my query Swapnil Jain ""Swapnil Jain"" wrote in message news:[EMAIL PROTECTED]... > Dear Friends, > > I am already using 2610 with PRI NM as a ISDN Access Server. I also want to > use it as a Access Server for PSTN analog dialup lines. Can i do this by > replacing PRI line with E1 R2 line. or what else i have to do > > > Warm Regards > > Swapnil Jain > Project Consultant > Digitec Engineers & Computech Pvt Ltd > Ph: +91-731-533455 / 268851 > Fax: +91-731-435701 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23865&t=23101 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
encapsulation on ISDN Leased Line [7:20365]
Friends, what are the encapsulation methods available on ISDN Leased Line on Cisco1750 router. I want to use FRAME RELAY. if frame relay is there how do i configure it. Warm Regards Swapnil Jain Project Consultant Digitec Engineers & Computech Pvt Ltd Ph: +91-731-533455 / 268851 Fax: +91-731-435701 Warm Regards Swapnil Jain Project Consultant Digitec Engineers & Computech Pvt Ltd Ph: +91-731-533455 / 268851 Fax: +91-731-435701 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=20365&t=20365 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2610 Router for sale [7:17984]
what price have you fixed for that Warm Regards Swapnil Jain (CNE,MCSE,CCNA,CCDA) Project Consultant Digitec Engineers & Computech Pvt Ltd Ph: +91-731-533455 / 268851 Fax: +91-731-435701 ""Terence"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hey Guys/Girls, > I have 3 2610 Cisco routers for sale. They are in great condition. Was > used at a client site that were replaced with 3600 series routers. Here is > the spec's: > > Cisco Internetwork Operating System Software > IOS (tm) C2600 Software (C2600-D-M), Version 12.0(5)T1, RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-1999 by cisco Systems, Inc. > Compiled Tue 17-Aug-99 13:11 by cmong > Image text-base: 0x80008088, data-base: 0x80859E60 > > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) > > Router uptime is 0 minutes > System returned to ROM by power-on > System image file is "flash:c2600-d-mz.120-5.T1.bin" > > cisco 2610 (MPC860) processor (revision 0x202) with 26624K/6144K bytes of > memory > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18178&t=17984 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
voip white papers [7:8317]
please suggest me some links for voice over ip presentation and white papers. swapnil _ Chat with your friends as soon as they come online. Get Rediff Bol at http://bol.rediff.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8317&t=8317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
subscribe [7:891]
sucscribe [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=891&t=891 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
To Use TACACS+ or RADIUS
Hi All I am using Steel-Belted Radius for authentication of the users dial into my RAS server(BAY Networks). I have a query wether I can use RADIUS for authentication of the users connecting to my cisco router using vty terminals(telnet). Can I also use RADIUS for command authorisation as I can do it with tacacs. ? If I can, does steel-belted Radius support it or if any other RADIUS supports it pls suggest it. Best Regards Swapnil Shah E-Mail :- [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
looking for a job
Hi, I am a job seeker looking for an opportunity in network engineer/administration in NT, Cisco & LAN/WAN. I am open to relocation. I am open to travel to any extent as required by the job. The only catch is that I am under legal obligation to continue employment through the company who holds my H-1B. But they are willing to let me join another company at a nominal finder fee. They can also let me work on a contract. If this may work ok with you, I very much look forward to hearing from you. You may please be informed that I have excellent technical skills and I am interested in making it in the US. Enclosed please find my resume. Thanks & Regards. Swapnil Jain (BBA, CNE, MCSE, CCNA) _ Chat with your friends as soon as they come online. Get Rediff Bol at http://bol.rediff.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
1603 with 2BRI
Hi friends, 1603 has 1 ISDN BRI onboard and a WAN Interface Slot. can we use another ISDN BRI WIC and use both simumtaneously. Swapnil Jain _ Chat with your friends as soon as they come online. Get Rediff Bol at http://bol.rediff.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help required for BCRAN
Hi All I am planning to give BCRAN exam within a fortnight ... I have bought a Mcgraw Hill's Remote Access Study Guide and also have CBT's for BCRAN. Can any one pls guide me if these are the sufficient resources. Is ther any other good stuff on net except the cisco site (exam oriented) Kindly help me out .. Regards Swapnil Shah _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help for BCRAN books and amterial related
Dear All Can anyone suggest any good book or any other material on BCRAN exam. I am planning to bye CBT's are they sufficient ?? I have not given BSCN exam.Can I give BCRAN without giving BSCN. Pls kindly reply to the query whoever can help; Thanks Group --- With Best Regards Swapnil Shah Get your FREE Email and Voicemail at Lycos Communications at http://comm.lycos.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Books for BSCN
Can you pls suggest the study material for the BSCN exam --- With Best Regards Swapnil Shah On Thu, 31 Aug 2000 18:15:39 David Williams wrote: >There are a few objectives dealing with OSPF and EIGRP in NBMA domains, so from that >standpoint there is some configuration knowledge involved. It doesn't deal >specifically with FR, but you should be aware of the implications and Cisco's >recommendations in dealing with it. > ""Gabriel Nickel"" <[EMAIL PROTECTED]> wrote in message >005401c0132e$f022a6c0$12e6a8c0@Westend">news:005401c0132e$f022a6c0$12e6a8c0@Westend... > as a part of many ospf sample configurations frame relay is used. is a detailed >knowledge of frame relay required for BSCN or are the basics sufficient? > thanks for any input > > /gabriel > > > > Get your FREE Email and Voicemail at Lycos Communications at http://comm.lycos.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Passed CCNA 2.0
I passed CCNA 2.0 today. Thanks group for your support and the timely advises. --- With Best Regards Swapnil Shah Get your FREE Email and Voicemail at Lycos Communications at http://comm.lycos.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using Proxy-server over a Cisco serial link
hi i do have a similar setup but it works. the only problem here seems that the two pc's which are on different subnet are not able to reach the proxy server.(as you cant ping the proxy) there can be some routing issue between your two lan's else it should work fine . --- With Best Regards Swapnil Shah On Sat, 26 Aug 2000 17:18:55 AABAN34 wrote: > >I have this question about proxy-server? I have WIN98SE that has my dial-up >to the Internet and I have proxy-server on this PC too , this is connected to >one of my Cisco routers ; I have 3 router that are connected together running >EIGRP IP only. I have 3 other pc's connected to each one my routers, not >including my proxy-server ( 4 pc's in total) . The pc that is on the same >subnet as the proxy-server works just fine, I had set all the right setting >in my IE 5.0 for proxy-server for all of my pc's, but the other 2 pc's can >not connect to the internet for some reason. I had done traces and pings to >the proxy-server with no replays, but I can ping each other just fine. Does >proxy-server only work on the same subnet as your workstation, that is going >to use the Internet or is their a way for my other 2 pc's can utilize the >proxy-server like the one that is on the same subnet as the proxy-server is? > > > >Brian >Email Address [EMAIL PROTECTED] > >___ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > Get your FREE Email and Voicemail at Lycos Communications at http://comm.lycos.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help reqd !! Appearing for CCNA 2.0 exams
Dear All I am appearing for CCNA 2.0 examination on 30th August. I have ICND book from Cisco press but is any extra reading required or any extra topics not covered in the ICND course book . Also in Exam outline and Preparation guide on the Cisco site states that ATM is also included . Are there any questions asked on ATM if yes then where can I find appropriate material on ATM Also if somebody can guide on what sort of questions are asked the most or what topics are more critical and more tricky questions are asked Please help me out on the above mentioned issues. --- With Best Regards Swapnil Shah Get your FREE Email and Voicemail at Lycos Communications at http://comm.lycos.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: trial copy of ciscoworks
i got it - Original Message - From: Jeffrey Humphreys <[EMAIL PROTECTED]> To: swapnil <[EMAIL PROTECTED]>; Cisco <[EMAIL PROTECTED]> Sent: Monday, July 24, 2000 5:33 AM Subject: Re: trial copy of ciscoworks > Try http://www.cisco.com/kobayashi/sw-center/netmgmt/cww/cwwindows.html > > Jeff > > - Original Message - > From: swapnil <[EMAIL PROTECTED]> > To: Paul Borghese <[EMAIL PROTECTED]>; Cisco <[EMAIL PROTECTED]> > Sent: Sunday, July 23, 2000 12:04 AM > Subject: Re: trial copy of ciscoworks > > > > I didn't find there. do you have any links > > > > - Original Message - > > From: Paul Borghese <[EMAIL PROTECTED]> > > To: Cisco <[EMAIL PROTECTED]> > > Sent: Monday, July 24, 2000 2:54 AM > > Subject: Re: trial copy of ciscoworks > > > > > > > have you tried cisco.com? > > > - Original Message - > > > From: "swapnil" <[EMAIL PROTECTED]> > > > To: "cgs" <[EMAIL PROTECTED]> > > > Sent: Saturday, July 22, 2000 11:28 AM > > > Subject: trial copy of ciscoworks > > > > > > > > > > from where can I get trial copy of ciscoworks for winnt. > > > > > > > > swapnil > > > > > > > > ___ > > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > ___ > > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: trial copy of ciscoworks
I didn't find there. do you have any links - Original Message - From: Paul Borghese <[EMAIL PROTECTED]> To: Cisco <[EMAIL PROTECTED]> Sent: Monday, July 24, 2000 2:54 AM Subject: Re: trial copy of ciscoworks > have you tried cisco.com? > - Original Message - > From: "swapnil" <[EMAIL PROTECTED]> > To: "cgs" <[EMAIL PROTECTED]> > Sent: Saturday, July 22, 2000 11:28 AM > Subject: trial copy of ciscoworks > > > > from where can I get trial copy of ciscoworks for winnt. > > > > swapnil > > > > ___ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
trial copy of ciscoworks
from where can I get trial copy of ciscoworks for winnt. swapnil ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Switching 2.0 module
The Switching (640-504) exam will contain a combination of the following topics: 1) Bridging/Switching Trunking Broadcasts Multicasts VTP Routing PIM Multi-Layer Switching Fast Ethernet IP Multicast Quality of Service Security TAG Switching Static VLANS 2) OSI Reference Model & Layered Communication Troubleshooting 3) Network Fundamentals DDR 4) Standards Definitions IEEE Standards 5)Cisco Fundamentals Debug IOS CLI Switch Cisco TAC/CCO Troubleshooting 6) OSI Reference Model & Layered Communication Switch Components RMON Policy management 7) Network Protocols ATM LANE Troubleshooting Switching Switching modes/methods Port Configuration Switching modes/methods 8) Routing Trunking this my help you good luck for your exam swapnil - Original Message - From: <[EMAIL PROTECTED]> To: groupstudy <[EMAIL PROTECTED]> Sent: Wednesday, July 19, 2000 8:31 AM Subject: Switching 2.0 module > > > Does anyone have some more detailed information about the Switching 2.0 exam? > seems to be really different from the clsc exam but how much? > > cvp > ccna > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
access list
to use access list do I need some extra ios feature like IP Plus or something. Swapnil Jain (CNE, MCSE, CCNA) ICQ# 45074571 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: DHCP on Router!!
IOS 12.0(1)T - Original Message - From: jeongwoo park <[EMAIL PROTECTED]> To: Groupstudy <[EMAIL PROTECTED]> Sent: Sunday, July 16, 2000 6:20 AM Subject: DHCP on Router!! Hi all I heard that router had DHCP function. Is that true? if it is, which version is that? Thanks in adv __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cat3500xl
Cisco cat3500 xl has 100baseT ports and two GBIC slots. some lx, sx & zx GBIC modules are available. can somebody tell me what max distance can I have between 2 3500xl switches using multimode fiber optic cable and these different GBIC modules. thanks Swapnil Jain (CNE, MCSE, CCNA) ICQ# 45074571 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Any special ports for Outlook Web access?
just enabling http port will do it Swapnil Jain (CNE, MCSE, CCNA) ICQ# 45074571 - Original Message - From: Daniel Ma <[EMAIL PROTECTED]> To: Cisco (E-mail) <[EMAIL PROTECTED]> Sent: Wednesday, July 12, 2000 11:04 AM Subject: Any special ports for Outlook Web access? > Sorry, a little out of topic. > > We have installed an MS Exchange server behind the firewall, and opened the > SMTP port for it. Now the customer requires Outlook Web Access. I just > wonder whether we should open any other ports for this service, or just HTTP > will do. > > Thanks, > > Daniel Ma > Systems Engineer > Enterprise Computing Unit > Infonet Systems & Services Pte Ltd > DID: (65)4616095 Fax: 4792289 > > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP study lab
Hi jordan, even i was looking for you can download it http://www.routersimulator.com/. Swapnil Jain(CNE, MCSE, CCNA)ICQ# 45074571 - Original Message - From: Jordan Rivard To: [EMAIL PROTECTED] Sent: Friday, July 07, 2000 6:51 AM Subject: CCNP study lab Would any of you recommend routersim 2.0 for a CCNA espiring to become a CCNP? Thanks, Jordan
Looking for a job
Hi friends, I am looking for a job in US. I am a Network Engineer with 3 years of experience and CNE, MCSE & CCNA certifications. I am working in Indore, MP, India since last 3 years as a Sr. Network Engineer. I am willing to change my job prefered USA. Is there anybody who can help me. Thanks, Swapnil Jain (CNE, MCSE, CCNA) ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Motorola & Cisco Frame Relay
well I haven't tried it, but you try it and let me know. use annex D and rfc1490 at Motorola (vanguard) end, & ietf(encap) and ansi (lmi) at Cisco end. Swapnil Jain (CNE, MCSE, CCNA) ICQ# 45074571 - Original Message - From: Olden Pieterse <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 03, 2000 8:22 PM Subject: Motorola & Cisco Frame Relay > Hi there gang > > Has anyone done this ? Configuring Cisco & Motorola Frame Relay without > getting encapsulation problems ? > I would appreciate any help ! > > Cheers > > Olden Pieterse >MCP , CCNA , BCMSN , BSCN , BCRAN > Brainbench Certified CISCO Network Implementation Specialist > Technical Consultant > Mobile : +27 82 410 8621 > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ACRC Tips
Hi Friends, I am preparing for ACRC any tips, material, links are requested. Swapnil Jain (CNE, MCSE, CCNA) ICQ# 45074571 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]