Help!!! [7:9311]
[ The following text is in the "x-user-defined" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] I have just bought a Cisco 2503 router from Ebay. However, after I boot up the router, I only see the following 2 interfaces: Router>show ip int brief InterfaceIP-Address OK? MethodStatus Protocol BRI0 unassigned YES not set administratively down down Ethernet0unassigned YES not set administratively down down Router> But I can't find the Serial interfaces. I tried swapping out the DRAM and Flash, but the same thing happen. Please help. Another thing I noticed when the router boots up: F3: 3343908+79112+202788 at 0x360 show flash System flash directory: File Length Name/status 1 3423052 igs-g-l.110-9 [3423116 bytes used, 771188 available, 4194304 total] 4096K bytes of processor board System flash (Read ONLY) And when i do show ver, it's not even showing up?? Processor board ID 02996147, with hardware revision Bridging software. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Regards, Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9311&t=9311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help!!! [7:9311]
Lee, Just from your show ver looks like the IOS is not seeing the serial interfaces. I suggest you upgrade your code. Raul - Original Message - From: "Hunt Lee" To: Sent: Thursday, June 21, 2001 9:56 AM Subject: Help!!! [7:9311] > [ The following text is in the "x-user-defined" character set. ] > [ Your display is set for the "US-ASCII" character set. ] > [ Some characters may be displayed incorrectly. ] > > I have just bought a Cisco 2503 router from Ebay. However, after I boot > up the router, I only see the following 2 interfaces: > > Router>show ip int brief > InterfaceIP-Address OK? MethodStatus > Protocol > BRI0 unassigned YES not set administratively down > down > Ethernet0unassigned YES not set administratively down > down > Router> > > But I can't find the Serial interfaces. I tried swapping out the DRAM > and Flash, but the same thing happen. Please help. Another thing I > noticed when the router boots up: > > F3: 3343908+79112+202788 at 0x360 show flash > > System flash directory: > File Length Name/status > 1 3423052 igs-g-l.110-9 > [3423116 bytes used, 771188 available, 4194304 total] > 4096K bytes of processor board System flash (Read ONLY) > > And when i do show ver, it's not even showing up?? > > Processor board ID 02996147, with hardware revision > Bridging software. > Basic Rate ISDN software, Version 1.0. > 1 Ethernet/IEEE 802.3 interface. > 1 ISDN Basic Rate interface. > 32K bytes of non-volatile configuration memory. > 4096K bytes of processor board System flash (Read ONLY) > > Configuration register is 0x2102 > > > Regards, > Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9319&t=9311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help!!! [7:9311]
i dont know about the serial int BUT. the igs ios you have on your machine won`t do diddlyno ospf.no rip .no ip no nothing .get a new ios ( a proper 2503 ip ios ) and try again i think you can only use a ios 11.2 because you need more flash to run some of the later ones HTH steve >From: "Hunt Lee" >Reply-To: "Hunt Lee" >To: [EMAIL PROTECTED] >Subject: Help!!! [7:9311] >Date: Thu, 21 Jun 2001 09:56:09 -0400 > >[ The following text is in the "x-user-defined" character set. ] > [ Your display is set for the "US-ASCII" character set. ] > [ Some characters may be displayed incorrectly. ] > >I have just bought a Cisco 2503 router from Ebay. However, after I boot >up the router, I only see the following 2 interfaces: > >Router>show ip int brief >InterfaceIP-Address OK? MethodStatus >Protocol >BRI0 unassigned YES not set administratively down >down >Ethernet0unassigned YES not set administratively down >down >Router> > >But I can't find the Serial interfaces. I tried swapping out the DRAM >and Flash, but the same thing happen. Please help. Another thing I >noticed when the router boots up: > >F3: 3343908+79112+202788 at 0x360 show flash > >System flash directory: >File Length Name/status > 1 3423052 igs-g-l.110-9 >[3423116 bytes used, 771188 available, 4194304 total] >4096K bytes of processor board System flash (Read ONLY) > >And when i do show ver, it's not even showing up?? > >Processor board ID 02996147, with hardware revision >Bridging software. >Basic Rate ISDN software, Version 1.0. >1 Ethernet/IEEE 802.3 interface. >1 ISDN Basic Rate interface. >32K bytes of non-volatile configuration memory. >4096K bytes of processor board System flash (Read ONLY) > >Configuration register is 0x2102 > > >Regards, >Hunt Lee _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9320&t=9311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help!!! [7:9311]
If you received any warranty or "not DOA" guarantee from the seller, return it. Your IOS image is valid. See: http://www.cisco.com/warp/public/620/5.shtml My guess is that there is a hardware problem. Cisco might replace it for a fee. Call the TAC and explain your situation. They will put you in contact with the person who can tell you your choices. > -Original Message- > From: Hunt Lee [mailto:[EMAIL PROTECTED]] > Sent: Thursday, June 21, 2001 8:56 AM > To: [EMAIL PROTECTED] > Subject: Help!!! [7:9311] > > > [ The following text is in the "x-user-defined" character set. ] > [ Your display is set for the "US-ASCII" character set. ] > [ Some characters may be displayed incorrectly. ] > > I have just bought a Cisco 2503 router from Ebay. However, > after I boot > up the router, I only see the following 2 interfaces: > > Router>show ip int brief > InterfaceIP-Address OK? MethodStatus > Protocol > BRI0 unassigned YES not set administratively down > down > Ethernet0unassigned YES not set administratively down > down > Router> > > But I can't find the Serial interfaces. I tried swapping out the DRAM > and Flash, but the same thing happen. Please help. Another thing I > noticed when the router boots up: > > F3: 3343908+79112+202788 at 0x360 show flash > > System flash directory: > File Length Name/status > 1 3423052 igs-g-l.110-9 > [3423116 bytes used, 771188 available, 4194304 total] > 4096K bytes of processor board System flash (Read ONLY) > > And when i do show ver, it's not even showing up?? > > Processor board ID 02996147, with hardware revision > Bridging software. > Basic Rate ISDN software, Version 1.0. > 1 Ethernet/IEEE 802.3 interface. > 1 ISDN Basic Rate interface. > 32K bytes of non-volatile configuration memory. > 4096K bytes of processor board System flash (Read ONLY) > > Configuration register is 0x2102 > > > Regards, > Hunt Lee > Report misconduct > and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9347&t=9311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help!!! [7:9311]
Hai Lee The problem is the with the IOS version and release that is required to detect your serial network module / WIC card for the 2503 router. The best solution for u is to visit the following URL and check the hardware-software compatibility matrix and then download the respective IOS version : http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi Hope this solves your problem, Meenakshi Sundaram. RM Network Consultant OHI Telecommunications Co. LLC P.O Box 889, Muscat, Postal code 113 Sultanate of OMAN ' Off :(968)603606 Ext : 236 H Res: (968)693266 X GSM : (968)9224172 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hunt Lee Sent: Thursday, June 21, 2001 5:56 PM To: [EMAIL PROTECTED] Subject: Help!!! [7:9311] [ The following text is in the "x-user-defined" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] I have just bought a Cisco 2503 router from Ebay. However, after I boot up the router, I only see the following 2 interfaces: Router>show ip int brief InterfaceIP-Address OK? MethodStatus Protocol BRI0 unassigned YES not set administratively down down Ethernet0unassigned YES not set administratively down down Router> But I can't find the Serial interfaces. I tried swapping out the DRAM and Flash, but the same thing happen. Please help. Another thing I noticed when the router boots up: F3: 3343908+79112+202788 at 0x360 show flash System flash directory: File Length Name/status 1 3423052 igs-g-l.110-9 [3423116 bytes used, 771188 available, 4194304 total] 4096K bytes of processor board System flash (Read ONLY) And when i do show ver, it's not even showing up?? Processor board ID 02996147, with hardware revision Bridging software. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Regards, Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9608&t=9311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help!!! [7:9311]
Hai Lee The problem is the with the IOS version and release that is required to detect your serial network module / WIC card for the 2503 router. The best solution for u is to visit the following URL and check the hardware-software compatibility matrix and then download the respective IOS version : http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi Hope this solves your problem, Meenakshi Sundaram. RM Network Consultant OHI Telecommunications Co. LLC P.O Box 889, Muscat, Postal code 113 Sultanate of OMAN ' Off :(968)603606 Ext : 236 H Res: (968)693266 X GSM : (968)9224172 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hunt Lee Sent: Thursday, June 21, 2001 5:56 PM To: [EMAIL PROTECTED] Subject: Help!!! [7:9311] [ The following text is in the "x-user-defined" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ] I have just bought a Cisco 2503 router from Ebay. However, after I boot up the router, I only see the following 2 interfaces: Router>show ip int brief InterfaceIP-Address OK? MethodStatus Protocol BRI0 unassigned YES not set administratively down down Ethernet0unassigned YES not set administratively down down Router> But I can't find the Serial interfaces. I tried swapping out the DRAM and Flash, but the same thing happen. Please help. Another thing I noticed when the router boots up: F3: 3343908+79112+202788 at 0x360 show flash System flash directory: File Length Name/status 1 3423052 igs-g-l.110-9 [3423116 bytes used, 771188 available, 4194304 total] 4096K bytes of processor board System flash (Read ONLY) And when i do show ver, it's not even showing up?? Processor board ID 02996147, with hardware revision Bridging software. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Regards, Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9610&t=9311 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]