Need Cisco guru help [7:34864]
hello, I have a question: I'm setting up a simulation lab for my CCNA. I have 2 routers, Cisco2501, 2503. I'm setting up frame-relay on both of the serial one but for some reason, the 2 routers don't talk. I tried to encap ppp but here is an error message. I know i need a DTE and a DCE for frame to work. Thanks, Serial1 is up, line protocol is down Hardware is HD64570 Internet address is 200.0.0.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 9488, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 14232, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:08, output 00:00:08, output hang never Last clearing of show interface counters 1d02h Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14232 packets input, 186598 bytes, 0 no buffer Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34864t=34864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Need Cisco guru help [7:34864]
I have a feeling this is a mismatch type of problem. Please see the link below: http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1918.htm Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34866t=34864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need Cisco guru help [7:34864]
If you only have 2 routers, then you need to disable keepalives on both sides - #no keepalive. One side has to provided the clocking, the DCE side with # clock rate 64000 Encap has to be frame-relay, PPP won't work as this is a frame circuit not a point-to-point. Then do a #frame-relay map ip on both sides. This will work. Regards. From: Mixa Reply-To: Mixa To: [EMAIL PROTECTED] Subject: Need Cisco guru help [7:34864] Date: Fri, 8 Feb 2002 12:42:27 -0500 hello, I have a question: I'm setting up a simulation lab for my CCNA. I have 2 routers, Cisco2501, 2503. I'm setting up frame-relay on both of the serial one but for some reason, the 2 routers don't talk. I tried to encap ppp but here is an error message. I know i need a DTE and a DCE for frame to work. Thanks, Serial1 is up, line protocol is down Hardware is HD64570 Internet address is 200.0.0.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 9488, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 14232, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:08, output 00:00:08, output hang never Last clearing of show interface counters 1d02h Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14232 packets input, 186598 bytes, 0 no buffer _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34875t=34864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Need Cisco guru help [7:34864]
Make sure you have disabled KEEPALIVE on both routers. For more info - look here: http://www.cisco.com/warp/public/125/frbacktoback.html Hth, Ole ~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ -Original Message- From: Mixa [mailto:[EMAIL PROTECTED]] Sent: Friday, February 08, 2002 11:42 AM To: [EMAIL PROTECTED] Subject: Need Cisco guru help [7:34864] hello, I have a question: I'm setting up a simulation lab for my CCNA. I have 2 routers, Cisco2501, 2503. I'm setting up frame-relay on both of the serial one but for some reason, the 2 routers don't talk. I tried to encap ppp but here is an error message. I know i need a DTE and a DCE for frame to work. Thanks, Serial1 is up, line protocol is down Hardware is HD64570 Internet address is 200.0.0.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 9488, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 14232, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:08, output 00:00:08, output hang never Last clearing of show interface counters 1d02h Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14232 packets input, 186598 bytes, 0 no buffer Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34883t=34864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need Cisco guru help [7:34864]
Thanks all. That's interesting... now i remember that i printed out that article (don't know where it is) that Jensen put in for me. Thanks all. I'll give it a try. Cisco Nuts wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... If you only have 2 routers, then you need to disable keepalives on both sides - #no keepalive. One side has to provided the clocking, the DCE side with # clock rate 64000 Encap has to be frame-relay, PPP won't work as this is a frame circuit not a point-to-point. Then do a #frame-relay map ip on both sides. This will work. Regards. From: Mixa Reply-To: Mixa To: [EMAIL PROTECTED] Subject: Need Cisco guru help [7:34864] Date: Fri, 8 Feb 2002 12:42:27 -0500 hello, I have a question: I'm setting up a simulation lab for my CCNA. I have 2 routers, Cisco2501, 2503. I'm setting up frame-relay on both of the serial one but for some reason, the 2 routers don't talk. I tried to encap ppp but here is an error message. I know i need a DTE and a DCE for frame to work. Thanks, Serial1 is up, line protocol is down Hardware is HD64570 Internet address is 200.0.0.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 9488, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 14232, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:08, output 00:00:08, output hang never Last clearing of show interface counters 1d02h Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 48 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14232 packets input, 186598 bytes, 0 no buffer _ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=34888t=34864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]