PRI to BRI BACKUP [7:21136]
Dear all, could somone help me with my following question how to configure ISDN PRI to BRI ? I would like to configure the following szenario: 1 central site : 1x PRI 13 remote site: 1x BRI If our frame goes down or one of the PVC to the remote site i would like to activate ISDN Backup with 128kb from the centrale site to the remote side and the other way arround. But how it is possible to configure the central site using 128kb (2 timeslots) for calling the remote site ? I have got 30B Channels (30 timeslots) on the central side. Please help me best regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21136&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PRI to BRI BACKUP [7:21136]
Michael, You need to configure your PRI interface and I believe create one to many channel-groups on that interface as needed; One for every pair of lines that will run to your remote sites, so say 13 channel-groups. Hope this helps, Tim Booth - Original Message - From: "michael" To: Sent: Wednesday, September 26, 2001 8:54 AM Subject: PRI to BRI BACKUP [7:21136] > Dear all, > > could somone help me with my following question how to configure > ISDN PRI to BRI ? > > I would like to configure the following szenario: > > 1 central site : 1x PRI > 13 remote site: 1x BRI > > If our frame goes down or one of the PVC to the remote site i would like to > activate ISDN Backup with 128kb from the centrale site to the remote side > and the other way arround. > But how it is possible to configure the central site using 128kb (2 > timeslots) for calling the remote site ? I have got 30B Channels (30 > timeslots) on the central side. > > Please help me > > best regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21150&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AW: PRI to BRI BACKUP [7:21136]
thanks tim, but how it is possible to assign channel-groups ? best regards -Urspr|ngliche Nachricht- Von: Tim Booth [mailto:[EMAIL PROTECTED]] Gesendet: Mittwoch, 26. September 2001 16:17 An: [EMAIL PROTECTED] Betreff: Re: PRI to BRI BACKUP [7:21136] Michael, You need to configure your PRI interface and I believe create one to many channel-groups on that interface as needed; One for every pair of lines that will run to your remote sites, so say 13 channel-groups. Hope this helps, Tim Booth - Original Message - From: "michael" To: Sent: Wednesday, September 26, 2001 8:54 AM Subject: PRI to BRI BACKUP [7:21136] > Dear all, > > could somone help me with my following question how to configure > ISDN PRI to BRI ? > > I would like to configure the following szenario: > > 1 central site : 1x PRI > 13 remote site: 1x BRI > > If our frame goes down or one of the PVC to the remote site i would like to > activate ISDN Backup with 128kb from the centrale site to the remote side > and the other way arround. > But how it is possible to configure the central site using 128kb (2 > timeslots) for calling the remote site ? I have got 30B Channels (30 > timeslots) on the central side. > > Please help me > > best regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21153&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PRI to BRI BACKUP [7:21136]
Michael, Per-PRI interface...(controller T1 or maybe E1 command) then set up the framing and linecode, then set up channel-groups with the channel-group command. Tim Booth - Original Message - From: "Michael Dungl" To: "Tim Booth" ; Sent: Wednesday, September 26, 2001 9:44 AM Subject: AW: PRI to BRI BACKUP [7:21136] thanks tim, but how it is possible to assign channel-groups ? best regards -Urspr|ngliche Nachricht- Von: Tim Booth [mailto:[EMAIL PROTECTED]] Gesendet: Mittwoch, 26. September 2001 16:17 An: [EMAIL PROTECTED] Betreff: Re: PRI to BRI BACKUP [7:21136] Michael, You need to configure your PRI interface and I believe create one to many channel-groups on that interface as needed; One for every pair of lines that will run to your remote sites, so say 13 channel-groups. Hope this helps, Tim Booth - Original Message - From: "michael" To: Sent: Wednesday, September 26, 2001 8:54 AM Subject: PRI to BRI BACKUP [7:21136] > Dear all, > > could somone help me with my following question how to configure > ISDN PRI to BRI ? > > I would like to configure the following szenario: > > 1 central site : 1x PRI > 13 remote site: 1x BRI > > If our frame goes down or one of the PVC to the remote site i would like to > activate ISDN Backup with 128kb from the centrale site to the remote side > and the other way arround. > But how it is possible to configure the central site using 128kb (2 > timeslots) for calling the remote site ? I have got 30B Channels (30 > timeslots) on the central side. > > Please help me > > best regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21155&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PRI to BRI BACKUP [7:21136]
An alternative method... If you configure the PRI using a dialer profile for every remote site and make each Dialer interface the backup route (using floating statics) or backup-interface for the remote sites you can instruct the interface to use a maximum of 2 channels. I'm not going to go into dialer profile config here - it's easy to find on cisco.com but the command you need in the Dialer Interface config is "dialer max-calls 2". Alternatively you can configure "dialer pool-member # max-link 2" on the physical interface. they do the same job but there are reasons why you may need to use one rather than the other. Have a go at it and let us know if you still have problems. regards Charlie --- Tim Booth wrote: > Michael, > > You need to configure your PRI interface and I believe create one > to many > channel-groups on that interface as needed; One for every pair of > lines that > will run to your remote sites, so say 13 channel-groups. > > Hope this helps, > Tim Booth > - Original Message - > From: "michael" > To: > Sent: Wednesday, September 26, 2001 8:54 AM > Subject: PRI to BRI BACKUP [7:21136] > > > > Dear all, > > > > could somone help me with my following question how to configure > > ISDN PRI to BRI ? > > > > I would like to configure the following szenario: > > > > 1 central site : 1x PRI > > 13 remote site: 1x BRI > > > > If our frame goes down or one of the PVC to the remote site i > would like > to > > activate ISDN Backup with 128kb from the centrale site to the > remote side > > and the other way arround. > > But how it is possible to configure the central site using 128kb > (2 > > timeslots) for calling the remote site ? I have got 30B Channels > (30 > > timeslots) on the central side. > > > > Please help me > > > > best regards [EMAIL PROTECTED] Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21159&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PRI to BRI BACKUP [7:21136]
Actually it's much simpler than that. You set up your T1 controller, D channel and pool and usernames and passwords for authentication. The remotes simply dial the PRI number when they, preferbly, loose a route. Of coarse there are other more convoluted ways but I like to KISS it. (Keep It Simple Stupid:) username remoteA password letmein ! controller T1 0 framing esf clock source line primary linecode b8zs pri-group timeslots 1-24 interface Serial0:23 ip unnumbered FastEthernet0 no ip directed-broadcast encapsulation ppp no keepalive autodetect encapsulation ppp v120 isdn switch-type primary-5ess isdn incoming-voice modem peer default ip address pool DIALIN no fair-queue compress stac ppp authentication chap pap callin ppp multilink ! ip local pool DIALIN 172.16.200.150 172.16.200.254 Tim Booth wrote: > > Michael, > > You need to configure your PRI interface and I believe create one to many > channel-groups on that interface as needed; One for every pair of lines that > will run to your remote sites, so say 13 channel-groups. > > Hope this helps, > Tim Booth > - Original Message - > From: "michael" > To: > Sent: Wednesday, September 26, 2001 8:54 AM > Subject: PRI to BRI BACKUP [7:21136] > > > Dear all, > > > > could somone help me with my following question how to configure > > ISDN PRI to BRI ? > > > > I would like to configure the following szenario: > > > > 1 central site : 1x PRI > > 13 remote site: 1x BRI > > > > If our frame goes down or one of the PVC to the remote site i would like > to > > activate ISDN Backup with 128kb from the centrale site to the remote side > > and the other way arround. > > But how it is possible to configure the central site using 128kb (2 > > timeslots) for calling the remote site ? I have got 30B Channels (30 > > timeslots) on the central side. > > > > Please help me > > > > best regards -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21166&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AW: PRI to BRI BACKUP [7:21136]
thanks a lot! Seems to be working. And now i have to configure on each timeslot the neccessary dialer map. i am right or ? many thanks for you help Michael channel-group 1 timeslots 1-2 ! interface serial 4/1:0 encapsulation ppp dialer map multilink ppp ! Serial0/0:1 is reset, line protocol is down Hardware is DSX1 MTU 1500 bytes, BW 128 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set Keepalive set (10 sec) LCP Closed, multilink Closed Closed: CDPCP Last input never, output never, output hang never Last clearing of "show interface" counters 00:12:59 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 12 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions Timeslot(s) Used:1-2, Transmitter delay is 0 flags -Urspr|ngliche Nachricht- Von: Tim Booth [mailto:[EMAIL PROTECTED]] Gesendet: Mittwoch, 26. September 2001 16:38 An: [EMAIL PROTECTED] Betreff: Re: PRI to BRI BACKUP [7:21136] Michael, Per-PRI interface...(controller T1 or maybe E1 command) then set up the framing and linecode, then set up channel-groups with the channel-group command. Tim Booth - Original Message - From: "Michael Dungl" To: "Tim Booth" ; Sent: Wednesday, September 26, 2001 9:44 AM Subject: AW: PRI to BRI BACKUP [7:21136] thanks tim, but how it is possible to assign channel-groups ? best regards -Urspr|ngliche Nachricht- Von: Tim Booth [mailto:[EMAIL PROTECTED]] Gesendet: Mittwoch, 26. September 2001 16:17 An: [EMAIL PROTECTED] Betreff: Re: PRI to BRI BACKUP [7:21136] Michael, You need to configure your PRI interface and I believe create one to many channel-groups on that interface as needed; One for every pair of lines that will run to your remote sites, so say 13 channel-groups. Hope this helps, Tim Booth - Original Message - From: "michael" To: Sent: Wednesday, September 26, 2001 8:54 AM Subject: PRI to BRI BACKUP [7:21136] > Dear all, > > could somone help me with my following question how to configure > ISDN PRI to BRI ? > > I would like to configure the following szenario: > > 1 central site : 1x PRI > 13 remote site: 1x BRI > > If our frame goes down or one of the PVC to the remote site i would like to > activate ISDN Backup with 128kb from the centrale site to the remote side > and the other way arround. > But how it is possible to configure the central site using 128kb (2 > timeslots) for calling the remote site ? I have got 30B Channels (30 > timeslots) on the central side. > > Please help me > > best regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21165&t=21136 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
