RE: PPP Authentication CHAP [7:18093]
*Mar 1 01:42:53.795: BR0:2 CHAP: Username plusnet not found > -Original Message- > From: Gaz [mailto:[EMAIL PROTECTED]] > Sent: Friday, August 31, 2001 3:38 PM > To: [EMAIL PROTECTED] > Subject: PPP Authentication CHAP [7:18093] > > > Hi, > > Can you help me plz guys been trying to get me 1601 with ISDN > WIC to work > for yonks. From debug's it looks like CHAP AUTH is failing > but I don't know > why ?! > > I have enclosed sh ver, sh run and debug dialer, debug ppp auth chap. > > Any help would be greatly appreciated. > > Thanx in advance. > > Sh ver > > 1601#sh ver > Cisco Internetwork Operating System Software > IOS (tm) 1600 Software (C1600-SY-L), Version 12.0(7)T, > RELEASE SOFTWARE > (fc2) > Copyright (c) 1986-1999 by cisco Systems, Inc. > Compiled Mon 06-Dec-99 18:03 by phanguye > Image text-base: 0x0803DCE8, data-base: 0x02005000 > > ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY > DEPLOYMENT > RELEASE > SOFTWARE (fc2) > ROM: 1600 Software (C1600-BOOT-R), Version 11.1(7)AX, EARLY DEPLOYMENT > RELEASE S > OFTWARE (fc2) > > 1601 uptime is 1 hour, 30 minutes > System returned to ROM by power-on > System image file is "flash:/c1600-1207T.bin" > > cisco 1601 (68360) processor (revision C) with 13824K/4608K > bytes of memory. > Processor board ID 04909005, with hardware revision > Bridging software. > X.25 software, Version 3.0.0. > Basic Rate ISDN software, Version 1.1. > 1 Ethernet/IEEE 802.3 interface(s) > 1 Serial(sync/async) network interface(s) > 1 ISDN Basic Rate interface(s) > System/IO memory with parity disabled > 2048K bytes of DRAM onboard 16384K bytes of DRAM on SIMM > System running from FLASH > 7K bytes of non-volatile configuration memory. > 8192K bytes of processor board PCMCIA flash (Read ONLY) > > Configuration register is 0x2102 > > > Sh run > > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug datetime msec > service timestamps log uptime > no service password-encryption > service udp-small-servers > service tcp-small-servers > ! > hostname 1601 > ! > enable secret 5 $1$FgI.$bygzIO/R77k37T.qfBWhH. > ! > username xx password 0 x > ! > ! > ! > ! > ip subnet-zero > no ip domain-lookup > ! > isdn switch-type basic-net3 > isdn voice-call-failure 0 > ! > ! > ! > interface Ethernet0 > ip address 10.10.1.1 255.255.255.0 > no ip directed-broadcast > ip nat inside > no ip route-cache > no ip mroute-cache > ! > interface Serial0 > physical-layer async > bandwidth 64000 > ip unnumbered Ethernet0 > no ip directed-broadcast > encapsulation ppp > no ip route-cache > no ip mroute-cache > keepalive 10 > dialer in-band > dialer wait-for-carrier-time 120 > async mode interactive > fair-queue 64 16 0 > ppp authentication chap callin > ! > interface BRI0 > bandwidth 64 > ip address negotiated > no ip directed-broadcast > ip nat outside > encapsulation ppp > no ip route-cache > no ip mroute-cache > no keepalive > dialer idle-timeout 150 > dialer string 08451400101 > dialer-group 2 > isdn switch-type basic-net3 > ppp authentication chap > ! > ip nat inside source list 100 interface BRI0 overload > ip classless > ip route 0.0.0.0 0.0.0.0 BRI0 > no ip http server > ! > access-list 100 permit ip 10.10.1.0 0.0.0.255 any > access-list 101 deny udp any any eq snmp > access-list 101 deny udp any any eq ntp > access-list 101 permit ip any any > access-list 110 deny udp 10.10.1.0 0.0.0.255 eq netbios-ns any log > dialer-list 1 protocol ip list 110 > dialer-list 2 protocol ip permit > ! > line con 0 > exec-timeout 0 0 > transport input none > line 1 > modem InOut > transport input all > stopbits 1 > speed 115200 > flowcontrol hardware > line vty 0 > exec-timeout 0 0 > login local > length 25 > line vty 1 4 > exec-timeout 0 0 > login local > ! > > > 1601#sh deb > Dial on demand: > Dial on demand events debugging is on > PPP: > PPP protocol negotiation debugging is on > ISDN: > ISDN Q931 packets debugging is on > ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-) > DSL 0 --> 1 > 1 - > > 1601#ping 4.1.1.1 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 4.1.1.1, timeout is 2 seconds: > > *Mar 1 01:42:51.533: BRI0 DDR: Dialing cause ip > (s=10.10.1.1, d=4.1.1.1) > *Mar 1 01:42:51.537: BRI0 DDR: Attempting to dial 08451400101 > *Mar 1 01:42:51.549: ISDN BR0: TX -> SETUP pd = 8 callref = 0x04 > *Mar 1 01:42:51.553: Bearer Capability i = 0x8890 > *Mar 1 01:42:51.553: Channel ID i = 0x83 > *Mar 1 01:42:51.557: Called Party Number i = 0x80, > '08451400101' > *Mar 1 01:42:51.747: ISDN BR0: RX CONNECT_ACK pd = 8 > callref = 0x04 > 01:43:43: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up > 01:43:43: %ISDN-6-CONNECT: Interface BRI0:2 is now connected > to 08451400101 > *Mar 1 01:42:53.561: BR0:2 PPP: Treating connection as a callout > *Mar 1 01:42:53.565: BR0:2 PPP: Phase is EST
RE: PPP Authentication CHAP [7:18093]
Looks like it is trying to authenticate with the name plusnet? Is that correct? Try putting the: ppp pap sent-username xx password yy in and see what happens. Put this under the bri0 int. -Original Message- From: Gaz [mailto:[EMAIL PROTECTED]] Sent: Friday, August 31, 2001 3:38 PM To: [EMAIL PROTECTED] Subject: PPP Authentication CHAP [7:18093] Hi, Can you help me plz guys been trying to get me 1601 with ISDN WIC to work for yonks. From debug's it looks like CHAP AUTH is failing but I don't know why ?! I have enclosed sh ver, sh run and debug dialer, debug ppp auth chap. Any help would be greatly appreciated. Thanx in advance. Sh ver 1601#sh ver Cisco Internetwork Operating System Software IOS (tm) 1600 Software (C1600-SY-L), Version 12.0(7)T, RELEASE SOFTWARE (fc2) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Mon 06-Dec-99 18:03 by phanguye Image text-base: 0x0803DCE8, data-base: 0x02005000 ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT RELEASE SOFTWARE (fc2) ROM: 1600 Software (C1600-BOOT-R), Version 11.1(7)AX, EARLY DEPLOYMENT RELEASE S OFTWARE (fc2) 1601 uptime is 1 hour, 30 minutes System returned to ROM by power-on System image file is "flash:/c1600-1207T.bin" cisco 1601 (68360) processor (revision C) with 13824K/4608K bytes of memory. Processor board ID 04909005, with hardware revision Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 1 Serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) System/IO memory with parity disabled 2048K bytes of DRAM onboard 16384K bytes of DRAM on SIMM System running from FLASH 7K bytes of non-volatile configuration memory. 8192K bytes of processor board PCMCIA flash (Read ONLY) Configuration register is 0x2102 Sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug datetime msec service timestamps log uptime no service password-encryption service udp-small-servers service tcp-small-servers ! hostname 1601 ! enable secret 5 $1$FgI.$bygzIO/R77k37T.qfBWhH. ! username xx password 0 x ! ! ! ! ip subnet-zero no ip domain-lookup ! isdn switch-type basic-net3 isdn voice-call-failure 0 ! ! ! interface Ethernet0 ip address 10.10.1.1 255.255.255.0 no ip directed-broadcast ip nat inside no ip route-cache no ip mroute-cache ! interface Serial0 physical-layer async bandwidth 64000 ip unnumbered Ethernet0 no ip directed-broadcast encapsulation ppp no ip route-cache no ip mroute-cache keepalive 10 dialer in-band dialer wait-for-carrier-time 120 async mode interactive fair-queue 64 16 0 ppp authentication chap callin ! interface BRI0 bandwidth 64 ip address negotiated no ip directed-broadcast ip nat outside encapsulation ppp no ip route-cache no ip mroute-cache no keepalive dialer idle-timeout 150 dialer string 08451400101 dialer-group 2 isdn switch-type basic-net3 ppp authentication chap ! ip nat inside source list 100 interface BRI0 overload ip classless ip route 0.0.0.0 0.0.0.0 BRI0 no ip http server ! access-list 100 permit ip 10.10.1.0 0.0.0.255 any access-list 101 deny udp any any eq snmp access-list 101 deny udp any any eq ntp access-list 101 permit ip any any access-list 110 deny udp 10.10.1.0 0.0.0.255 eq netbios-ns any log dialer-list 1 protocol ip list 110 dialer-list 2 protocol ip permit ! line con 0 exec-timeout 0 0 transport input none line 1 modem InOut transport input all stopbits 1 speed 115200 flowcontrol hardware line vty 0 exec-timeout 0 0 login local length 25 line vty 1 4 exec-timeout 0 0 login local ! 1601#sh deb Dial on demand: Dial on demand events debugging is on PPP: PPP protocol negotiation debugging is on ISDN: ISDN Q931 packets debugging is on ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-) DSL 0 --> 1 1 - 1601#ping 4.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 4.1.1.1, timeout is 2 seconds: *Mar 1 01:42:51.533: BRI0 DDR: Dialing cause ip (s=10.10.1.1, d=4.1.1.1) *Mar 1 01:42:51.537: BRI0 DDR: Attempting to dial 08451400101 *Mar 1 01:42:51.549: ISDN BR0: TX -> SETUP pd = 8 callref = 0x04 *Mar 1 01:42:51.553: Bearer Capability i = 0x8890 *Mar 1 01:42:51.553: Channel ID i = 0x83 *Mar 1 01:42:51.557: Called Party Number i = 0x80, '08451400101' *Mar 1 01:42:51.747: ISDN BR0: RX CONNECT_ACK pd = 8 callref = 0x04 01:43:43: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up 01:43:43: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 08451400101 *Mar 1 01:42:53.561: BR0:2 PPP: Treating connection as a callout *Mar 1 01:42:53.565: BR0:2 PPP: Phase is ESTABLISHING, Active Open *Mar 1 01:42:53.569: BR0:2 LCP: O CONFREQ [Closed] id 7 len 15 *Mar 1 01:42:53.573: BR0:2 LCP:AuthProto CHAP (0x0305C22305) *Mar 1 01:42:53.577: BR0:2 LCP:MagicNumber 0x60BBB227 (0x050660BBB227) *Mar 1 01:42:53.616: BR
RE: PPP Authentication CHAP [7:18093]
The host you are dialing into does not have your username "plusnet" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18151&t=18093 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PPP Authentication CHAP [7:18093]
The host you are dialing into does not have your username "plusnet" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18150&t=18093 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PPP Authentication CHAP [7:18093]
i have been through this one . your config is fine just check the following the name of the remote router has to be the username and the password the same on both example local router r4 username r3 pass cisco remote router r3 username r4 pass cisco Gaz wrote: > Hi, > > Can you help me plz guys been trying to get me 1601 with ISDN WIC to work > for yonks. From debug's it looks like CHAP AUTH is failing but I don't know > why ?! > > I have enclosed sh ver, sh run and debug dialer, debug ppp auth chap. > > Any help would be greatly appreciated. > > Thanx in advance. > > Sh ver > > 1601#sh ver > Cisco Internetwork Operating System Software > IOS (tm) 1600 Software (C1600-SY-L), Version 12.0(7)T, RELEASE SOFTWARE > (fc2) > Copyright (c) 1986-1999 by cisco Systems, Inc. > Compiled Mon 06-Dec-99 18:03 by phanguye > Image text-base: 0x0803DCE8, data-base: 0x02005000 > > ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT > RELEASE > SOFTWARE (fc2) > ROM: 1600 Software (C1600-BOOT-R), Version 11.1(7)AX, EARLY DEPLOYMENT > RELEASE S > OFTWARE (fc2) > > 1601 uptime is 1 hour, 30 minutes > System returned to ROM by power-on > System image file is "flash:/c1600-1207T.bin" > > cisco 1601 (68360) processor (revision C) with 13824K/4608K bytes of memory. > Processor board ID 04909005, with hardware revision > Bridging software. > X.25 software, Version 3.0.0. > Basic Rate ISDN software, Version 1.1. > 1 Ethernet/IEEE 802.3 interface(s) > 1 Serial(sync/async) network interface(s) > 1 ISDN Basic Rate interface(s) > System/IO memory with parity disabled > 2048K bytes of DRAM onboard 16384K bytes of DRAM on SIMM > System running from FLASH > 7K bytes of non-volatile configuration memory. > 8192K bytes of processor board PCMCIA flash (Read ONLY) > > Configuration register is 0x2102 > > Sh run > > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug datetime msec > service timestamps log uptime > no service password-encryption > service udp-small-servers > service tcp-small-servers > ! > hostname 1601 > ! > enable secret 5 $1$FgI.$bygzIO/R77k37T.qfBWhH. > ! > username xx password 0 x > ! > ! > ! > ! > ip subnet-zero > no ip domain-lookup > ! > isdn switch-type basic-net3 > isdn voice-call-failure 0 > ! > ! > ! > interface Ethernet0 > ip address 10.10.1.1 255.255.255.0 > no ip directed-broadcast > ip nat inside > no ip route-cache > no ip mroute-cache > ! > interface Serial0 > physical-layer async > bandwidth 64000 > ip unnumbered Ethernet0 > no ip directed-broadcast > encapsulation ppp > no ip route-cache > no ip mroute-cache > keepalive 10 > dialer in-band > dialer wait-for-carrier-time 120 > async mode interactive > fair-queue 64 16 0 > ppp authentication chap callin > ! > interface BRI0 > bandwidth 64 > ip address negotiated > no ip directed-broadcast > ip nat outside > encapsulation ppp > no ip route-cache > no ip mroute-cache > no keepalive > dialer idle-timeout 150 > dialer string 08451400101 > dialer-group 2 > isdn switch-type basic-net3 > ppp authentication chap > ! > ip nat inside source list 100 interface BRI0 overload > ip classless > ip route 0.0.0.0 0.0.0.0 BRI0 > no ip http server > ! > access-list 100 permit ip 10.10.1.0 0.0.0.255 any > access-list 101 deny udp any any eq snmp > access-list 101 deny udp any any eq ntp > access-list 101 permit ip any any > access-list 110 deny udp 10.10.1.0 0.0.0.255 eq netbios-ns any log > dialer-list 1 protocol ip list 110 > dialer-list 2 protocol ip permit > ! > line con 0 > exec-timeout 0 0 > transport input none > line 1 > modem InOut > transport input all > stopbits 1 > speed 115200 > flowcontrol hardware > line vty 0 > exec-timeout 0 0 > login local > length 25 > line vty 1 4 > exec-timeout 0 0 > login local > ! > > 1601#sh deb > Dial on demand: > Dial on demand events debugging is on > PPP: > PPP protocol negotiation debugging is on > ISDN: > ISDN Q931 packets debugging is on > ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-) > DSL 0 --> 1 > 1 - > > 1601#ping 4.1.1.1 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 4.1.1.1, timeout is 2 seconds: > > *Mar 1 01:42:51.533: BRI0 DDR: Dialing cause ip (s=10.10.1.1, d=4.1.1.1) > *Mar 1 01:42:51.537: BRI0 DDR: Attempting to dial 08451400101 > *Mar 1 01:42:51.549: ISDN BR0: TX -> SETUP pd = 8 callref = 0x04 > *Mar 1 01:42:51.553: Bearer Capability i = 0x8890 > *Mar 1 01:42:51.553: Channel ID i = 0x83 > *Mar 1 01:42:51.557: Called Party Number i = 0x80, '08451400101' > *Mar 1 01:42:51.747: ISDN BR0: RX CONNECT_ACK pd = 8 callref = 0x04 > 01:43:43: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up > 01:43:43: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 08451400101 > *Mar 1 01:42:53.561: BR0:2 PPP: Treating connection as a callout > *Mar 1 01:42:53.565: BR0:2 PPP: Phase is ESTABLISHING, Active Open > *
Re: PPP Authentication CHAP [7:18093]
Hello Gaz, I was facing a very similar issue.This is what I did and it may seem strange but it worked for me .I turned on service password-encryption and then CHAP authentication strated working . See if it works for you Jaspreet Gaz wrote: > Hi, > > Can you help me plz guys been trying to get me 1601 with ISDN WIC to work > for yonks. From debug's it looks like CHAP AUTH is failing but I don't know > why ?! > > I have enclosed sh ver, sh run and debug dialer, debug ppp auth chap. > > Any help would be greatly appreciated. > > Thanx in advance. > > Sh ver > > 1601#sh ver > Cisco Internetwork Operating System Software > IOS (tm) 1600 Software (C1600-SY-L), Version 12.0(7)T, RELEASE SOFTWARE > (fc2) > Copyright (c) 1986-1999 by cisco Systems, Inc. > Compiled Mon 06-Dec-99 18:03 by phanguye > Image text-base: 0x0803DCE8, data-base: 0x02005000 > > ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT > RELEASE > SOFTWARE (fc2) > ROM: 1600 Software (C1600-BOOT-R), Version 11.1(7)AX, EARLY DEPLOYMENT > RELEASE S > OFTWARE (fc2) > > 1601 uptime is 1 hour, 30 minutes > System returned to ROM by power-on > System image file is "flash:/c1600-1207T.bin" > > cisco 1601 (68360) processor (revision C) with 13824K/4608K bytes of memory. > Processor board ID 04909005, with hardware revision > Bridging software. > X.25 software, Version 3.0.0. > Basic Rate ISDN software, Version 1.1. > 1 Ethernet/IEEE 802.3 interface(s) > 1 Serial(sync/async) network interface(s) > 1 ISDN Basic Rate interface(s) > System/IO memory with parity disabled > 2048K bytes of DRAM onboard 16384K bytes of DRAM on SIMM > System running from FLASH > 7K bytes of non-volatile configuration memory. > 8192K bytes of processor board PCMCIA flash (Read ONLY) > > Configuration register is 0x2102 > > Sh run > > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug datetime msec > service timestamps log uptime > no service password-encryption > service udp-small-servers > service tcp-small-servers > ! > hostname 1601 > ! > enable secret 5 $1$FgI.$bygzIO/R77k37T.qfBWhH. > ! > username xx password 0 x > ! > ! > ! > ! > ip subnet-zero > no ip domain-lookup > ! > isdn switch-type basic-net3 > isdn voice-call-failure 0 > ! > ! > ! > interface Ethernet0 > ip address 10.10.1.1 255.255.255.0 > no ip directed-broadcast > ip nat inside > no ip route-cache > no ip mroute-cache > ! > interface Serial0 > physical-layer async > bandwidth 64000 > ip unnumbered Ethernet0 > no ip directed-broadcast > encapsulation ppp > no ip route-cache > no ip mroute-cache > keepalive 10 > dialer in-band > dialer wait-for-carrier-time 120 > async mode interactive > fair-queue 64 16 0 > ppp authentication chap callin > ! > interface BRI0 > bandwidth 64 > ip address negotiated > no ip directed-broadcast > ip nat outside > encapsulation ppp > no ip route-cache > no ip mroute-cache > no keepalive > dialer idle-timeout 150 > dialer string 08451400101 > dialer-group 2 > isdn switch-type basic-net3 > ppp authentication chap > ! > ip nat inside source list 100 interface BRI0 overload > ip classless > ip route 0.0.0.0 0.0.0.0 BRI0 > no ip http server > ! > access-list 100 permit ip 10.10.1.0 0.0.0.255 any > access-list 101 deny udp any any eq snmp > access-list 101 deny udp any any eq ntp > access-list 101 permit ip any any > access-list 110 deny udp 10.10.1.0 0.0.0.255 eq netbios-ns any log > dialer-list 1 protocol ip list 110 > dialer-list 2 protocol ip permit > ! > line con 0 > exec-timeout 0 0 > transport input none > line 1 > modem InOut > transport input all > stopbits 1 > speed 115200 > flowcontrol hardware > line vty 0 > exec-timeout 0 0 > login local > length 25 > line vty 1 4 > exec-timeout 0 0 > login local > ! > > 1601#sh deb > Dial on demand: > Dial on demand events debugging is on > PPP: > PPP protocol negotiation debugging is on > ISDN: > ISDN Q931 packets debugging is on > ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-) > DSL 0 --> 1 > 1 - > > 1601#ping 4.1.1.1 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 4.1.1.1, timeout is 2 seconds: > > *Mar 1 01:42:51.533: BRI0 DDR: Dialing cause ip (s=10.10.1.1, d=4.1.1.1) > *Mar 1 01:42:51.537: BRI0 DDR: Attempting to dial 08451400101 > *Mar 1 01:42:51.549: ISDN BR0: TX -> SETUP pd = 8 callref = 0x04 > *Mar 1 01:42:51.553: Bearer Capability i = 0x8890 > *Mar 1 01:42:51.553: Channel ID i = 0x83 > *Mar 1 01:42:51.557: Called Party Number i = 0x80, '08451400101' > *Mar 1 01:42:51.747: ISDN BR0: RX CONNECT_ACK pd = 8 callref = 0x04 > 01:43:43: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up > 01:43:43: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 08451400101 > *Mar 1 01:42:53.561: BR0:2 PPP: Treating connection as a callout > *Mar 1 01:42:53.565: BR0:2 PPP: Phase is ESTABLISHING, Active Open > *Mar
RE: PPP Authentication CHAP [7:18093]
nothing to do with that.. -Original Message- From: Jaspreet Bhatia [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 13, 2001 12:30 AM To: [EMAIL PROTECTED] Subject: Re: PPP Authentication CHAP [7:18093] Hello Gaz, I was facing a very similar issue.This is what I did and it may seem strange but it worked for me .I turned on service password-encryption and then CHAP authentication strated working . See if it works for you Jaspreet Gaz wrote: > Hi, > > Can you help me plz guys been trying to get me 1601 with ISDN WIC to work > for yonks. From debug's it looks like CHAP AUTH is failing but I don't know > why ?! > > I have enclosed sh ver, sh run and debug dialer, debug ppp auth chap. > > Any help would be greatly appreciated. > > Thanx in advance. > > Sh ver > > 1601#sh ver > Cisco Internetwork Operating System Software > IOS (tm) 1600 Software (C1600-SY-L), Version 12.0(7)T, RELEASE SOFTWARE > (fc2) > Copyright (c) 1986-1999 by cisco Systems, Inc. > Compiled Mon 06-Dec-99 18:03 by phanguye > Image text-base: 0x0803DCE8, data-base: 0x02005000 > > ROM: System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT > RELEASE > SOFTWARE (fc2) > ROM: 1600 Software (C1600-BOOT-R), Version 11.1(7)AX, EARLY DEPLOYMENT > RELEASE S > OFTWARE (fc2) > > 1601 uptime is 1 hour, 30 minutes > System returned to ROM by power-on > System image file is "flash:/c1600-1207T.bin" > > cisco 1601 (68360) processor (revision C) with 13824K/4608K bytes of memory. > Processor board ID 04909005, with hardware revision > Bridging software. > X.25 software, Version 3.0.0. > Basic Rate ISDN software, Version 1.1. > 1 Ethernet/IEEE 802.3 interface(s) > 1 Serial(sync/async) network interface(s) > 1 ISDN Basic Rate interface(s) > System/IO memory with parity disabled > 2048K bytes of DRAM onboard 16384K bytes of DRAM on SIMM > System running from FLASH > 7K bytes of non-volatile configuration memory. > 8192K bytes of processor board PCMCIA flash (Read ONLY) > > Configuration register is 0x2102 > > Sh run > > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug datetime msec > service timestamps log uptime > no service password-encryption > service udp-small-servers > service tcp-small-servers > ! > hostname 1601 > ! > enable secret 5 $1$FgI.$bygzIO/R77k37T.qfBWhH. > ! > username xx password 0 x > ! > ! > ! > ! > ip subnet-zero > no ip domain-lookup > ! > isdn switch-type basic-net3 > isdn voice-call-failure 0 > ! > ! > ! > interface Ethernet0 > ip address 10.10.1.1 255.255.255.0 > no ip directed-broadcast > ip nat inside > no ip route-cache > no ip mroute-cache > ! > interface Serial0 > physical-layer async > bandwidth 64000 > ip unnumbered Ethernet0 > no ip directed-broadcast > encapsulation ppp > no ip route-cache > no ip mroute-cache > keepalive 10 > dialer in-band > dialer wait-for-carrier-time 120 > async mode interactive > fair-queue 64 16 0 > ppp authentication chap callin > ! > interface BRI0 > bandwidth 64 > ip address negotiated > no ip directed-broadcast > ip nat outside > encapsulation ppp > no ip route-cache > no ip mroute-cache > no keepalive > dialer idle-timeout 150 > dialer string 08451400101 > dialer-group 2 > isdn switch-type basic-net3 > ppp authentication chap > ! > ip nat inside source list 100 interface BRI0 overload > ip classless > ip route 0.0.0.0 0.0.0.0 BRI0 > no ip http server > ! > access-list 100 permit ip 10.10.1.0 0.0.0.255 any > access-list 101 deny udp any any eq snmp > access-list 101 deny udp any any eq ntp > access-list 101 permit ip any any > access-list 110 deny udp 10.10.1.0 0.0.0.255 eq netbios-ns any log > dialer-list 1 protocol ip list 110 > dialer-list 2 protocol ip permit > ! > line con 0 > exec-timeout 0 0 > transport input none > line 1 > modem InOut > transport input all > stopbits 1 > speed 115200 > flowcontrol hardware > line vty 0 > exec-timeout 0 0 > login local > length 25 > line vty 1 4 > exec-timeout 0 0 > login local > ! > > 1601#sh deb > Dial on demand: > Dial on demand events debugging is on > PPP: > PPP protocol negotiation debugging is on > ISDN: > ISDN Q931 packets debugging is on > ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-) > DSL 0 --> 1 > 1 - > > 1601#ping 4.1.1.1 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 4.1.1.1, timeout is 2 seconds: > > *Mar 1 01:42:51.533: BRI0