Re: VIP4-80 help [7:9397]
Have a look at the Hardware Software compatibilty tool http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi The vip4-80 requires 12.1.3 minimum David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com - Original Message - From: "Donohue, Steve" To: Sent: Thursday, June 21, 2001 2:25 PM Subject: VIP4-80 help [7:9397] > Hey Gang, > > I am wondering if anyone out there has had any problem with the VIP4-80s for > 7500 router. I currently am unable to get the VIP recognized by the router. > When I look at the diagbus for that slot I receive the following > information. > > Slot 5: > Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0 > Internal Instruction Error, Microcode Status 0x0 > Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded > Board is disabled > Pending I/O Status: None > EEPROM format version 1 > VIP4-80 RM7000 controller, HW rev 2.01, board revision A0 > Serial number: 18547357 Part number: 73-3143-03 > Test history: 0x00RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00 > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Slot database information: > Flags: 0x201Insertion time: 0x8AE0 (00:18:14 ago) > > VIP Controller Memory Size: Unknown > > How do I get this VIP to be analyized, enabled, memory recognized, and the > Microcode status to 0X4? > > Any help would be greatly appreciated. > > Thanks. > > Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9401&t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VIP4-80 help [7:9397]
What IOS release are you running? We implemented two of these, one each in a 7513 and a 7505 to be able to use OC12 PA. The search for an IOS that would run everything is still not over. It seems that there is a bug with the Vip4-80 and OC12 PA. Tac is working on it. Kevin Wigle - Original Message - From: "Donohue, Steve" To: Sent: Thursday, June 21, 2001 2:25 PM Subject: VIP4-80 help [7:9397] > Hey Gang, > > I am wondering if anyone out there has had any problem with the VIP4-80s for > 7500 router. I currently am unable to get the VIP recognized by the router. > When I look at the diagbus for that slot I receive the following > information. > > Slot 5: > Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0 > Internal Instruction Error, Microcode Status 0x0 > Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded > Board is disabled > Pending I/O Status: None > EEPROM format version 1 > VIP4-80 RM7000 controller, HW rev 2.01, board revision A0 > Serial number: 18547357 Part number: 73-3143-03 > Test history: 0x00RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00 > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Slot database information: > Flags: 0x201Insertion time: 0x8AE0 (00:18:14 ago) > > VIP Controller Memory Size: Unknown > > How do I get this VIP to be analyized, enabled, memory recognized, and the > Microcode status to 0X4? > > Any help would be greatly appreciated. > > Thanks. > > Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9405&t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VIP4-80 help [7:9397]
I have a customer running the OC12 PA in a VIP4-80 without any problems. Of course they are running a Service Provider 12.0S Image, I believe 12.0(15)S. The 12.1E Train also supports both for Enterprise solutions, the same customer tested it with 12.1(2.6someverylongmumbojumbo)E because they wanted to work with an Enterprise Image. David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com - Original Message - From: "Kevin Wigle" To: Sent: Thursday, June 21, 2001 3:26 PM Subject: Re: VIP4-80 help [7:9397] > What IOS release are you running? > > We implemented two of these, one each in a 7513 and a 7505 to be able to use > OC12 PA. > > The search for an IOS that would run everything is still not over. It seems > that there is a bug with the Vip4-80 and OC12 PA. > > Tac is working on it. > > Kevin Wigle > > - Original Message - > From: "Donohue, Steve" > To: > Sent: Thursday, June 21, 2001 2:25 PM > Subject: VIP4-80 help [7:9397] > > > > Hey Gang, > > > > I am wondering if anyone out there has had any problem with the VIP4-80s > for > > 7500 router. I currently am unable to get the VIP recognized by the > router. > > When I look at the diagbus for that slot I receive the following > > information. > > > > Slot 5: > > Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0 > > Internal Instruction Error, Microcode Status 0x0 > > Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded > > Board is disabled > > Pending I/O Status: None > > EEPROM format version 1 > > VIP4-80 RM7000 controller, HW rev 2.01, board revision A0 > > Serial number: 18547357 Part number: 73-3143-03 > > Test history: 0x00RMA number: 00-00-00 > > Flags: cisco 7000 board; 7500 compatible > > > > EEPROM contents (hex): > > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00 > > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > > Slot database information: > > Flags: 0x201Insertion time: 0x8AE0 (00:18:14 ago) > > > > VIP Controller Memory Size: Unknown > > > > How do I get this VIP to be analyized, enabled, memory recognized, and the > > Microcode status to 0X4? > > > > Any help would be greatly appreciated. > > > > Thanks. > > > > Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9412&t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VIP4-80 help [7:9397]
Hi, as far as i remember, once i had the same problem, VIP was not recognised, and the problem was solved by upgrading the bootstrap software. hope it will solve the problem Shoaib --- "Donohue, Steve" wrote: > Hey Gang, > > I am wondering if anyone out there has had any > problem with the VIP4-80s for > 7500 router. I currently am unable to get the VIP > recognized by the router. > When I look at the diagbus for that slot I receive > the following > information. > > Slot 5: > Physical slot 5, ~physical slot 0xA, logical > slot 5, CBus 0 > Internal Instruction Error, Microcode Status > 0x0 > Master Enable, LED, WCS DBUS Cmd Enable, WCS > Loading, WCS Loaded > Board is disabled > Pending I/O Status: None > EEPROM format version 1 > VIP4-80 RM7000 controller, HW rev 2.01, > board revision A0 > Serial number: 18547357 Part number: > 73-3143-03 > Test history: 0x00RMA number: > 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 > 00 00 00 00 > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > > Slot database information: > Flags: 0x201Insertion time: 0x8AE0 > (00:18:14 ago) > > VIP Controller Memory Size: Unknown > > How do I get this VIP to be analyized, enabled, > memory recognized, and the > Microcode status to 0X4? > > Any help would be greatly appreciated. > > Thanks. > > Steve [EMAIL PROTECTED] __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9419&t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VIP4-80 help [7:9397]
What version of software are you attempting and what port adaptor are you using??? --- "Donohue, Steve" wrote: > Hey Gang, > > I am wondering if anyone out there has had any > problem with the VIP4-80s for > 7500 router. I currently am unable to get the VIP > recognized by the router. > When I look at the diagbus for that slot I receive > the following > information. > > Slot 5: > Physical slot 5, ~physical slot 0xA, logical > slot 5, CBus 0 > Internal Instruction Error, Microcode Status > 0x0 > Master Enable, LED, WCS DBUS Cmd Enable, WCS > Loading, WCS Loaded > Board is disabled > Pending I/O Status: None > EEPROM format version 1 > VIP4-80 RM7000 controller, HW rev 2.01, > board revision A0 > Serial number: 18547357 Part number: > 73-3143-03 > Test history: 0x00RMA number: > 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 > 00 00 00 00 > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > > Slot database information: > Flags: 0x201Insertion time: 0x8AE0 > (00:18:14 ago) > > VIP Controller Memory Size: Unknown > > How do I get this VIP to be analyized, enabled, > memory recognized, and the > Microcode status to 0X4? > > Any help would be greatly appreciated. > > Thanks. > > Steve [EMAIL PROTECTED] __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9464&t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VIP4-80 help [7:9397]
I am using 12.1.6 IOS. I actually have 2 VIP4-80s in the box, one is working fine, the other one is causing me the problem. I appreciate all the input I have received, but I am starting to wonder if this is a hardware problem, or if I can just reload the pertinent information. Thanks. Steve -Original Message- From: Kevin Wigle [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 21, 2001 3:19 PM To: Donohue, Steve; [EMAIL PROTECTED] Subject: Re: VIP4-80 help [7:9397] What IOS release are you running? We implemented two of these, one each in a 7513 and a 7505 to be able to use OC12 PA. The search for an IOS that would run everything is still not over. It seems that there is a bug with the Vip4-80 and OC12 PA. Tac is working on it. Kevin Wigle - Original Message - From: "Donohue, Steve" To: Sent: Thursday, June 21, 2001 2:25 PM Subject: VIP4-80 help [7:9397] > Hey Gang, > > I am wondering if anyone out there has had any problem with the VIP4-80s for > 7500 router. I currently am unable to get the VIP recognized by the router. > When I look at the diagbus for that slot I receive the following > information. > > Slot 5: > Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0 > Internal Instruction Error, Microcode Status 0x0 > Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded > Board is disabled > Pending I/O Status: None > EEPROM format version 1 > VIP4-80 RM7000 controller, HW rev 2.01, board revision A0 > Serial number: 18547357 Part number: 73-3143-03 > Test history: 0x00RMA number: 00-00-00 > Flags: cisco 7000 board; 7500 compatible > > EEPROM contents (hex): > 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00 > 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Slot database information: > Flags: 0x201Insertion time: 0x8AE0 (00:18:14 ago) > > VIP Controller Memory Size: Unknown > > How do I get this VIP to be analyized, enabled, memory recognized, and the > Microcode status to 0X4? > > Any help would be greatly appreciated. > > Thanks. > > Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9507&t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
