Questions on Routers for my lab [7:2338]
I'm looking at a decent deal on three routers. Can somone tell me if one of the hub ports on a 2516 and a 2507 can be router to. I am assuming since the whole group is a hub the whole group acts as eth0 right. A router wouldn't be any good would without a LAN port of some sort? Eugene Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2338t=2338 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Routers in my lab
Try a fully loaded 6509 with both power supplies. Needless to say, I'd recommend keeping the static bags hand to unload this thing before trying to get it into the rack, or at least yank both power supplies. -- Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "sam adams" [EMAIL PROTECTED] wrote in message 000201c08294$3c7e8870$075901c0@meanboy4">news:000201c08294$3c7e8870$075901c0@meanboy4... I think the Cat 5K is just a little to heavy for the back. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ole Drews Jensen Sent: Friday, January 19, 2001 8:22 AM To: 'Albert Lu' Cc: [EMAIL PROTECTED]; Mask Of Zorro Subject: RE: Routers in my lab What excactly you need or not, depends on what you want to study for next, and what you would like to practise. If you wish to work with Token Ring, you would need to get either a fixed router that has a build-in Token Ring interface, or a modular router where you can get a Token Ring WIC to insert. You would then also need a MAU (or MSAU as they are called in Microsoft Study Guides) and one or two Token Ring NIC's so you could play around with it. Noone can answer your question better than yourself. Draw what you need/would like on a piece of paper, and then look at the products available on http://www.cisco.com Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 10:29 AM To: Ole Drews Jensen Cc: [EMAIL PROTECTED]; Mask Of Zorro Subject: Re: Routers in my lab I'm thinking of getting rid of 1x2503 2x2610 1x2502 1x2504 And using that money to get Cat5000 and ISDN simulator. I'm also considering a couple of 2513, do I really need 2513 if so do I need 2 or can I go with 1? I know people who's done CCIE with just 6-7 routers, I'm not sure how I can make use of more than that either. BTW. My aim is to be able to do most of the CCBootcamp labs. -- From: Ole Drews Jensen [EMAIL PROTECTED] To: 'Albert Lu' [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Routers in my lab Date: Saturday, January 20, 2001 2:45 AM I would keep them all unless you're in acute need of money. Even though I'm many frequent flyer miles away from the CCIE, I do believe that you can not have to much equipment to practice on. If it were for the CCNA only, 1,2 or 3 2500's should be plenty. You might want to get rid of a some of the 2500's and get different routers instead, plus a switch or two. You can keep buying stuff from now to Christmas, the only thing that stops you are the amount of money you can afford to spend on this. If I was a multi-millionaire and for some reason still wanted to study for these Cisco tests, I would buy every model they have ever made and setup a whole house as a lab. But, I'm not, so I currently only have four 2500's to play with, but that's kind of okay for now. I would have liked a Cat5000, but that's a little too heavy for my wallet. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondis
Routers in my lab
Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Routers in my lab
I would keep them all unless you're in acute need of money. Even though I'm many frequent flyer miles away from the CCIE, I do believe that you can not have to much equipment to practice on. If it were for the CCNA only, 1,2 or 3 2500's should be plenty. You might want to get rid of a some of the 2500's and get different routers instead, plus a switch or two. You can keep buying stuff from now to Christmas, the only thing that stops you are the amount of money you can afford to spend on this. If I was a multi-millionaire and for some reason still wanted to study for these Cisco tests, I would buy every model they have ever made and setup a whole house as a lab. But, I'm not, so I currently only have four 2500's to play with, but that's kind of okay for now. I would have liked a Cat5000, but that's a little too heavy for my wallet. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Routers in my lab
I'm thinking of getting rid of 1x2503 2x2610 1x2502 1x2504 And using that money to get Cat5000 and ISDN simulator. I'm also considering a couple of 2513, do I really need 2513 if so do I need 2 or can I go with 1? I know people who's done CCIE with just 6-7 routers, I'm not sure how I can make use of more than that either. BTW. My aim is to be able to do most of the CCBootcamp labs. -- From: Ole Drews Jensen [EMAIL PROTECTED] To: 'Albert Lu' [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Routers in my lab Date: Saturday, January 20, 2001 2:45 AM I would keep them all unless you're in acute need of money. Even though I'm many frequent flyer miles away from the CCIE, I do believe that you can not have to much equipment to practice on. If it were for the CCNA only, 1,2 or 3 2500's should be plenty. You might want to get rid of a some of the 2500's and get different routers instead, plus a switch or two. You can keep buying stuff from now to Christmas, the only thing that stops you are the amount of money you can afford to spend on this. If I was a multi-millionaire and for some reason still wanted to study for these Cisco tests, I would buy every model they have ever made and setup a whole house as a lab. But, I'm not, so I currently only have four 2500's to play with, but that's kind of okay for now. I would have liked a Cat5000, but that's a little too heavy for my wallet. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Routers in my lab
What excactly you need or not, depends on what you want to study for next, and what you would like to practise. If you wish to work with Token Ring, you would need to get either a fixed router that has a build-in Token Ring interface, or a modular router where you can get a Token Ring WIC to insert. You would then also need a MAU (or MSAU as they are called in Microsoft Study Guides) and one or two Token Ring NIC's so you could play around with it. Noone can answer your question better than yourself. Draw what you need/would like on a piece of paper, and then look at the products available on http://www.cisco.com Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 10:29 AM To: Ole Drews Jensen Cc: [EMAIL PROTECTED]; Mask Of Zorro Subject: Re: Routers in my lab I'm thinking of getting rid of 1x2503 2x2610 1x2502 1x2504 And using that money to get Cat5000 and ISDN simulator. I'm also considering a couple of 2513, do I really need 2513 if so do I need 2 or can I go with 1? I know people who's done CCIE with just 6-7 routers, I'm not sure how I can make use of more than that either. BTW. My aim is to be able to do most of the CCBootcamp labs. -- From: Ole Drews Jensen [EMAIL PROTECTED] To: 'Albert Lu' [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Routers in my lab Date: Saturday, January 20, 2001 2:45 AM I would keep them all unless you're in acute need of money. Even though I'm many frequent flyer miles away from the CCIE, I do believe that you can not have to much equipment to practice on. If it were for the CCNA only, 1,2 or 3 2500's should be plenty. You might want to get rid of a some of the 2500's and get different routers instead, plus a switch or two. You can keep buying stuff from now to Christmas, the only thing that stops you are the amount of money you can afford to spend on this. If I was a multi-millionaire and for some reason still wanted to study for these Cisco tests, I would buy every model they have ever made and setup a whole house as a lab. But, I'm not, so I currently only have four 2500's to play with, but that's kind of okay for now. I would have liked a Cat5000, but that's a little too heavy for my wallet. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Routers in my lab
Check your lab against the racks at www.ccbootcamp.com. Do you have the routers and interfaces to replicate what Marc has done? I don't see any switches in your gear. -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Routers in my lab
If you are going for the CCIE, I would recommend having a 3600 series so that you can get your ATM and VoIP practice in. You might think about a Cat 2901 instead of the 5000. It runs the Crescendo OS just like the 5000 series. It is significantly cheaper, as well. Kelly D Griffin, CCNA Network Engineer Kg2 Network Design http://www.kg2.com - Original Message - From: "Ole Drews Jensen" [EMAIL PROTECTED] To: "'Albert Lu'" [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, January 19, 2001 9:45 AM Subject: RE: Routers in my lab I would keep them all unless you're in acute need of money. Even though I'm many frequent flyer miles away from the CCIE, I do believe that you can not have to much equipment to practice on. If it were for the CCNA only, 1,2 or 3 2500's should be plenty. You might want to get rid of a some of the 2500's and get different routers instead, plus a switch or two. You can keep buying stuff from now to Christmas, the only thing that stops you are the amount of money you can afford to spend on this. If I was a multi-millionaire and for some reason still wanted to study for these Cisco tests, I would buy every model they have ever made and setup a whole house as a lab. But, I'm not, so I currently only have four 2500's to play with, but that's kind of okay for now. I would have liked a Cat5000, but that's a little too heavy for my wallet. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] http://1cis.com Free E-mail Servers with unlimited mailboxes 1st Class Internet Solutions _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Routers in my lab
I think the Cat 5K is just a little to heavy for the back. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ole Drews Jensen Sent: Friday, January 19, 2001 8:22 AM To: 'Albert Lu' Cc: [EMAIL PROTECTED]; Mask Of Zorro Subject: RE: Routers in my lab What excactly you need or not, depends on what you want to study for next, and what you would like to practise. If you wish to work with Token Ring, you would need to get either a fixed router that has a build-in Token Ring interface, or a modular router where you can get a Token Ring WIC to insert. You would then also need a MAU (or MSAU as they are called in Microsoft Study Guides) and one or two Token Ring NIC's so you could play around with it. Noone can answer your question better than yourself. Draw what you need/would like on a piece of paper, and then look at the products available on http://www.cisco.com Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 10:29 AM To: Ole Drews Jensen Cc: [EMAIL PROTECTED]; Mask Of Zorro Subject: Re: Routers in my lab I'm thinking of getting rid of 1x2503 2x2610 1x2502 1x2504 And using that money to get Cat5000 and ISDN simulator. I'm also considering a couple of 2513, do I really need 2513 if so do I need 2 or can I go with 1? I know people who's done CCIE with just 6-7 routers, I'm not sure how I can make use of more than that either. BTW. My aim is to be able to do most of the CCBootcamp labs. -- From: Ole Drews Jensen [EMAIL PROTECTED] To: 'Albert Lu' [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Routers in my lab Date: Saturday, January 20, 2001 2:45 AM I would keep them all unless you're in acute need of money. Even though I'm many frequent flyer miles away from the CCIE, I do believe that you can not have to much equipment to practice on. If it were for the CCNA only, 1,2 or 3 2500's should be plenty. You might want to get rid of a some of the 2500's and get different routers instead, plus a switch or two. You can keep buying stuff from now to Christmas, the only thing that stops you are the amount of money you can afford to spend on this. If I was a multi-millionaire and for some reason still wanted to study for these Cisco tests, I would buy every model they have ever made and setup a whole house as a lab. But, I'm not, so I currently only have four 2500's to play with, but that's kind of okay for now. I would have liked a Cat5000, but that's a little too heavy for my wallet. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: Albert Lu [mailto:[EMAIL PROTECTED]] Sent: Friday, January 19, 2001 9:37 AM To: [EMAIL PROTECTED] Subject: Routers in my lab Hi all, Take a look at what I've got in my lab consisting of 12 routers. 3x2503 2511 2501 2521 2502 2504 2x2610 2x2620 Have I over done it? Are there scenarios in the CCIE that may need all this? What should I keep what should I get rid of? Thanks Albert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
