RE: why the prompt is different for 5505 switches? any one know?
>From the 5505>(enable) prompt enter "show module" >From that display determine in which slot the router (RSM) card is located. As Stefano gave in his reply we can imagine that it is in slot 4. Then enter "session 4". You will verify the slot as given above. That will get you to the 5505# prompt. It may require passwords just as a router will. The router module may be a daughter card on the Supervisor engine. I believe that it is called a Router Switch Feature Card (RSFC). Then enter "session 15". > -Original Message- > From: Chee Tong Sim [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, August 08, 2000 12:07 PM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; > [EMAIL PROTECTED] > Subject: RE: why the prompt is different for 5505 switches? any one > know? > > > Then how to get the 5505# configuration of RSM module > (internal router) from > 5505> prompt, after I type 5505> en ENTER password it will > guide me to > 5505> (enable) mode. How to go to 5505# from 5505> using > different > password or command? > > > > >From: Bosio Stefano <[EMAIL PROTECTED]> > >Reply-To: Bosio Stefano <[EMAIL PROTECTED]> > >To: "'Sim, CT (Chee Tong)'" <[EMAIL PROTECTED]>, > >"'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> > >Subject: RE: why the prompt is different for 5505 switches? > any one know? > >Date: Tue, 8 Aug 2000 13:49:55 +0200 > > > >1) > >The first one > > > > > SOMETAROU#sh conf > > > Using 1961 out of 126968 bytes > > > ! > > > version 11.2 > > > no service password-encryption > >. > > > >is the configuration of RSM module (internal router) > > > >the second one > > > > > sometarou> (enable) sh conf > > > . > > > .. > > > .. > > > .. > > > > > > begin > > > set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. > > > set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 > > > set prompt Console> > >... > > > >is the configuratione of the switch (supervisor) > > > >2) 5505> (enable) session (es. session 4) > > > > > >Stefano > > > > > > > -Original Message- > > > From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]] > > > Sent: martedì 8 agosto 2000 9.59 > > > To: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' > > > Subject: why the prompt is different for 5505 switches? > any one know? > > > > > > > > > Hi..Dear friends, I was very confused with the confuration > > > file of 5505, my > > > colleages send me two configuration file in Tokyo. > > > > > > One start with SOMETAROU#sh conf > > > > > > Another one start with sometarou> (enable) sh conf > > > > > > and two of them give me different configuration, (see below) > > > > > > 1)can any one tell me, what is the different? > > > > > > 2)I can telnet to my backbone switches, after I type 5505>en > > > password > > > it gives me 5505>(enable) prompt then what should I type to > > > get the 5505# > > > prompt > > > > > > 3)What is the special function 5505 back bone switch? Can > > > you use normal > > > switch like 1900, 2900 to replace it? (optional) > > > > > > > > > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > > > &&&&&&&&&&&&&& > > > &&&&&& > > > SOMETAROU#sh conf > > > Using 1961 out of 126968 bytes > > > ! > > > version 11.2 > > > no service password-encryption > > > no service udp-small-servers > > > no service tcp-small-servers > > > ! > > > hostname SOMETAROU > > > ! > > > enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/ > > > ! > > > ! > > > interface Vlan1 > > > description RABO-JP > > > ip address 57.198.45.251 255.255.255.0 > > > ip broadcast-address 57.198.45.255 > > > no ip redirects > > > standby 1 priority 100 > > > standby 1 preempt > > > standby 1 ip 57.198.45.250 > > > ! >
RE: why the prompt is different for 5505 switches? any one know?
Then how to get the 5505# configuration of RSM module (internal router) from 5505> prompt, after I type 5505> en ENTER password it will guide me to 5505> (enable) mode. How to go to 5505# from 5505> using different password or command? >From: Bosio Stefano <[EMAIL PROTECTED]> >Reply-To: Bosio Stefano <[EMAIL PROTECTED]> >To: "'Sim, CT (Chee Tong)'" <[EMAIL PROTECTED]>, >"'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> >Subject: RE: why the prompt is different for 5505 switches? any one know? >Date: Tue, 8 Aug 2000 13:49:55 +0200 > >1) >The first one > > > SOMETAROU#sh conf > > Using 1961 out of 126968 bytes > > ! > > version 11.2 > > no service password-encryption >. > >is the configuration of RSM module (internal router) > >the second one > > > sometarou> (enable) sh conf > > . > > .. > > .. > > .. > > > > begin > > set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. > > set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 > > set prompt Console> >... > >is the configuratione of the switch (supervisor) > >2) 5505> (enable) session (es. session 4) > > >Stefano > > > > -Original Message- > > From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]] > > Sent: martedì 8 agosto 2000 9.59 > > To: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' > > Subject: why the prompt is different for 5505 switches? any one know? > > > > > > Hi..Dear friends, I was very confused with the confuration > > file of 5505, my > > colleages send me two configuration file in Tokyo. > > > > One start with SOMETAROU#sh conf > > > > Another one start with sometarou> (enable) sh conf > > > > and two of them give me different configuration, (see below) > > > > 1)can any one tell me, what is the different? > > > > 2)I can telnet to my backbone switches, after I type 5505>en > > password > > it gives me 5505>(enable) prompt then what should I type to > > get the 5505# > > prompt > > > > 3)What is the special function 5505 back bone switch? Can > > you use normal > > switch like 1900, 2900 to replace it? (optional) > > > > > > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > > &&&&&&&&&&&&&& > > &&&&&& > > SOMETAROU#sh conf > > Using 1961 out of 126968 bytes > > ! > > version 11.2 > > no service password-encryption > > no service udp-small-servers > > no service tcp-small-servers > > ! > > hostname SOMETAROU > > ! > > enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/ > > ! > > ! > > interface Vlan1 > > description RABO-JP > > ip address 57.198.45.251 255.255.255.0 > > ip broadcast-address 57.198.45.255 > > no ip redirects > > standby 1 priority 100 > > standby 1 preempt > > standby 1 ip 57.198.45.250 > > ! > > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > > &&&&&&&&&&&&&& > > &&&&&&&& > > sometarou> (enable) sh conf > > . > > .. > > . > > .. > > .. > > .. > > .. > > > > begin > > set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. > > set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 > > set prompt Console> > > set length 24 default > > set logout 20 > > set banner motd ^C > > > > > > * Catalyst 5505 #2 * > > * SupervisorEngine * > > *sometarou * > > > > ^C > > ! > > #system > > set system baud 9600 > > set system modem disable > > set system name sometarou > > set system location > > set system contact > > ! > > #snmp > > set snmp community read-only public > > set
RE: why the prompt is different for 5505 switches? any one know?
1) The first one > SOMETAROU#sh conf > Using 1961 out of 126968 bytes > ! > version 11.2 > no service password-encryption . is the configuration of RSM module (internal router) the second one > sometarou> (enable) sh conf > . > .. > .. > .. > > begin > set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. > set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 > set prompt Console> ... is the configuratione of the switch (supervisor) 2) 5505> (enable) session (es. session 4) Stefano > -Original Message- > From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]] > Sent: martedì 8 agosto 2000 9.59 > To: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' > Subject: why the prompt is different for 5505 switches? any one know? > > > Hi..Dear friends, I was very confused with the confuration > file of 5505, my > colleages send me two configuration file in Tokyo. > > One start with SOMETAROU#sh conf > > Another one start with sometarou> (enable) sh conf > > and two of them give me different configuration, (see below) > > 1)can any one tell me, what is the different? > > 2)I can telnet to my backbone switches, after I type 5505>en > password > it gives me 5505>(enable) prompt then what should I type to > get the 5505# > prompt > > 3)What is the special function 5505 back bone switch? Can > you use normal > switch like 1900, 2900 to replace it? (optional) > > > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > &&&&&&&&&&&&&& > &&&&&& > SOMETAROU#sh conf > Using 1961 out of 126968 bytes > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname SOMETAROU > ! > enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/ > ! > ! > interface Vlan1 > description RABO-JP > ip address 57.198.45.251 255.255.255.0 > ip broadcast-address 57.198.45.255 > no ip redirects > standby 1 priority 100 > standby 1 preempt > standby 1 ip 57.198.45.250 > ! > &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& > &&&&&&&&&&&&&& > &&&&&&&& > sometarou> (enable) sh conf > . > .. > . > .. > .. > .. > .. > > begin > set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. > set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 > set prompt Console> > set length 24 default > set logout 20 > set banner motd ^C > > > * Catalyst 5505 #2 * > * SupervisorEngine * > *sometarou * > > ^C > ! > #system > set system baud 9600 > set system modem disable > set system name sometarou > set system location > set system contact > ! > #snmp > set snmp community read-only public > set snmp community read-write private > set snmp community read-write-all secret > set snmp rmon disable > set snmp trap disable module > set snmp trap disable chassis > set snmp trap disable bridge > > > == > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > de afzender direct te informeren door het bericht te retourneren. > == > The information contained in this message may be confidential > and is intended to be exclusively for the addressee. Should you > receive this message unintentionally, please do not use the contents > herein and notify the sender immediately by return e-mail. > > > == > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: why the prompt is different for 5505 switches? any one know?
1) If your colleages sent you the config files from the 5505 switch fabric then it would look similar to the second line "somertarou>(enable)"; however, your colleagues sent you the config off of the supervisor engine. 2) To get the to the switch fabric, get the address of the fabric and telnet to that. Stevan Pierce ""Sim, CT (Chee Tong)"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi..Dear friends, I was very confused with the confuration file of 5505, my > colleages send me two configuration file in Tokyo. > > One start with SOMETAROU#sh conf > > Another one start with sometarou> (enable) sh conf > > and two of them give me different configuration, (see below) > > 1)can any one tell me, what is the different? > > 2)I can telnet to my backbone switches, after I type 5505>en password > it gives me 5505>(enable) prompt then what should I type to get the 5505# > prompt > > 3)What is the special function 5505 back bone switch? Can you use normal > switch like 1900, 2900 to replace it? (optional) > > > > && > SOMETAROU#sh conf > Using 1961 out of 126968 bytes > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname SOMETAROU > ! > enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/ > ! > ! > interface Vlan1 > description RABO-JP > ip address 57.198.45.251 255.255.255.0 > ip broadcast-address 57.198.45.255 > no ip redirects > standby 1 priority 100 > standby 1 preempt > standby 1 ip 57.198.45.250 > ! > > > sometarou> (enable) sh conf > . > .. > . > .. > .. > .. > .. > > begin > set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. > set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 > set prompt Console> > set length 24 default > set logout 20 > set banner motd ^C > > > * Catalyst 5505 #2 * > * SupervisorEngine * > *sometarou * > > ^C > ! > #system > set system baud 9600 > set system modem disable > set system name sometarou > set system location > set system contact > ! > #snmp > set snmp community read-only public > set snmp community read-write private > set snmp community read-write-all secret > set snmp rmon disable > set snmp trap disable module > set snmp trap disable chassis > set snmp trap disable bridge > > > == > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > de afzender direct te informeren door het bericht te retourneren. > == > The information contained in this message may be confidential > and is intended to be exclusively for the addressee. Should you > receive this message unintentionally, please do not use the contents > herein and notify the sender immediately by return e-mail. > > > == > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
why the prompt is different for 5505 switches? any one know?
Hi..Dear friends, I was very confused with the confuration file of 5505, my colleages send me two configuration file in Tokyo. One start with SOMETAROU#sh conf Another one start with sometarou> (enable) sh conf and two of them give me different configuration, (see below) 1)can any one tell me, what is the different? 2)I can telnet to my backbone switches, after I type 5505>en password it gives me 5505>(enable) prompt then what should I type to get the 5505# prompt 3)What is the special function 5505 back bone switch? Can you use normal switch like 1900, 2900 to replace it? (optional) && SOMETAROU#sh conf Using 1961 out of 126968 bytes ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname SOMETAROU ! enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/ ! ! interface Vlan1 description RABO-JP ip address 57.198.45.251 255.255.255.0 ip broadcast-address 57.198.45.255 no ip redirects standby 1 priority 100 standby 1 preempt standby 1 ip 57.198.45.250 ! sometarou> (enable) sh conf . .. . .. .. .. .. begin set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa. set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0 set prompt Console> set length 24 default set logout 20 set banner motd ^C * Catalyst 5505 #2 * * SupervisorEngine * *sometarou * ^C ! #system set system baud 9600 set system modem disable set system name sometarou set system location set system contact ! #snmp set snmp community read-only public set snmp community read-write private set snmp community read-write-all secret set snmp rmon disable set snmp trap disable module set snmp trap disable chassis set snmp trap disable bridge == De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. == The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. == ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
