Re: Stus-List Depth sounder replacement

[Dr. Mark Bodnar via CnC-List]

  
  
Fair enough.  I do buy refurbished gear sometimes as well.  I was
  more thinking I'm not going to try and piece together a new
  transducer to the old display.
Raymarine doesn't have any of what I need right now in the referb
  section (only a depth display with no transducer)
Thanks,
Mark





There is no cure for birth and death save to enjoy the interval.
  - George Santayana
On 2018-12-19 5:14 PM, David Knecht via
  CnC-List wrote:


  
  I would disagree on one point.  I frequently buy refurbished
  electronics for boat and home and have not had a problem yet.  My
  logic is that at least the refurbished item has been specifically
  tested and shown to work up to spec.  That is more than the
  standard stuff off the assembly line gets.  Dave
  

  
S/V Aries
1990 C&C 34+
New London, CT






  
  
  
  
  ___

Thanks everyone for supporting this list with your contributions.  Each and every one is greatly appreciated.  If you want to support the list - use PayPal to send contribution --   https://www.paypal.me/stumurray




  


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[David Knecht via CnC-List]

I would disagree on one point.  I frequently buy refurbished electronics for 
boat and home and have not had a problem yet.  My logic is that at least the 
refurbished item has been specifically tested and shown to work up to spec.  
That is more than the standard stuff off the assembly line gets.  Dave

S/V Aries
1990 C&C 34+
New London, CT




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[Dr. Mark Bodnar via CnC-List]

  
  
Thanks everyone for the replys.
Fred - If I was going to go with the i40 instruments then I would
  just replace the depth sounder - I wouldn't be adding wind
  instruments as part of the i40 group.  
Don't think I'm going to go refurbished or The big question - do
  I jump to the whole package and add in the wind sensor or just
  replace the existing depth.  

Dwight noted the benefits of all the extra info - but I have to
  admit I have zero experience in that area --- my sailing history
  is in dinghys with zero instruments, and my last 2 keel boats with
  only depth and speed.  Add that more often than not I don't have
  "crew"

I guess the single transducer speed/depth/temp adds another minor
  complexity - I'd have a thru-hull to plug.  But I have a couple
  unused thru-hulls from my conversion to composting head - so I'll
  need to patch those sometime soon anyway.
I'm going to take a closer look at my wires - see if there is any
  sign of damage that could be repaired.   If no luck I'll have to
  decide which way to go.  

I'll likely wait for boat show sales to see if there are deals -
  or Fred do you have deals on an i70 system?  

Mark






There is no cure for birth and death save to enjoy the interval.
  - George Santayana
On 2018-12-18 5:33 PM, Frederick G
  Street via CnC-List wrote:


  
  Mark — I would NOT consider the i40 system for wind; your only
  choice for a wind transducer is one suitable only for power boats.
  
  
  The i70 is a nice system; and yes, you do get water
temp with it, as the transducer is a single depth/speed/temp
transducer.  And you get a much better wind transducer.
  
  
  — Fred

  
  
  Fred Street -- Minneapolis
  S/V Oceanis (1979
  C&C Landfall 38) -- on the hard in Bayfield,
  WI   :^(




  


  


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[David Knecht via CnC-List]

I put in a Raymarine Seatalkng network a few years ago with Fred’s help and am 
very happy with the system.  I added a Airmar DST800 depth/speed/temp tri-ducer 
last spring that I bought on eBay which plugged right into the network and 
worked perfectly.  It even fit into the hole from the old transducer with no 
modification.  For wind, I have a TacTic wireless wind sensor on the mast which 
I love because it needs no wiring, but you need a converter to get the signal 
into the Seatalkng network.  Given Raymarine seems to be making no progress at 
all on wireless, when I need to replace my masthead sensor, I will probably 
install a Sailtimer masthead unit (https://sailtimerwind.com 
).  Dave

> On Dec 18, 2018, at 5:30 PM, ALAN BERGEN via CnC-List  
> wrote:
> 
> I replaced an Autohelm depth sounder display with one I purchased from 
> someone on the list. the transducer was ok. You can also check out the 
> Raymarine refurbished instruments. 
> http://www.raymarine.com/store/refurbished/ 
> . You might find something you 
> want there.
> 
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
> 
> 
> 
> On Tue, Dec 18, 2018 at 1:11 PM Dr. Mark Bodnar via CnC-List 
> mailto:cnc-list@cnc-list.com>> wrote:
> 
> I'd appreciate some advice regarding a non-functioning depth sounder.
> 
> Near the end of the season my depth sounder started reading 0 no matter the 
> condition.  I couldn't find any obvious explanation for the problem - but I'm 
> thinking that the Autohelm depth and speedo are original to the 1986 boat - 
> so likely better to suck it up and replace than to jury rig a repair or sink 
> money into a new transducer.
> 
> Should I just replace the broken depth and worry about the speedo at at 
> another time?  Anyone think it's better to do a whole package?
> I have a Raymarine wheel pilot (waiting for me to install) - so I assume the 
> smart move would be to stick with the same product line. Such as - Raymarine 
> i40 Depth System with Thru-Hull Transducer E70142.  With the Binnacle a new 
> depth sounder $340, and a new speedo ($350) combined for almost $700 - would 
> I be better to add a whole package with wind instruments?
> Raymarine i70s Instrument Value Pack Speed Depth Wind T70226 -  
> https://tinyurl.com/y9zumft6 
> 
>  - $1600 cdn at Binnacle (I wouldn't mind if I could get water temp as well 
> but don't know if that's an option with Raymarine).
> 
> Another option - someone on this list suggested SailTimer as a better option 
> for wind instruments.
> 
> Thanks in advance
> 
> Mark
> 
> 
> -- 
> 
> 
> 
> 
> There is no cure for birth and death save to enjoy the interval.
>   - George Santayana
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=I4Gt-kmFq8ECAZ6487R_pOPcBW3Cn765kbmlV0CBRlk&s=s5z1e2n-3hHYwUFxkCIdJ3V4mjxkQvvOQeADX_8_-ps&e=
>  
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

S/V Aries
1990 C&C 34+
New London, CT



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[ALAN BERGEN via CnC-List]

I replaced an Autohelm depth sounder display with one I purchased from
someone on the list. the transducer was ok. You can also check out the
Raymarine refurbished instruments.
http://www.raymarine.com/store/refurbished/. You might find something you
want there.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Tue, Dec 18, 2018 at 1:11 PM Dr. Mark Bodnar via CnC-List <
cnc-list@cnc-list.com> wrote:

>
> I'd appreciate some advice regarding a non-functioning depth sounder.
>
> Near the end of the season my depth sounder started reading 0 no matter
> the condition.  I couldn't find any obvious explanation for the problem -
> but I'm thinking that the Autohelm depth and speedo are original to the
> 1986 boat - so likely better to suck it up and replace than to jury rig a
> repair or sink money into a new transducer.
>
> Should I just replace the broken depth and worry about the speedo at at
> another time?  Anyone think it's better to do a whole package?
>
> I have a Raymarine wheel pilot (waiting for me to install) - so I assume
> the smart move would be to stick with the same product line. Such as -
> Raymarine i40 Depth System with Thru-Hull Transducer E70142.  With the
> Binnacle a new depth sounder $340, and a new speedo ($350) combined for
> almost $700 - would I be better to add a whole package with wind
> instruments?
>
> Raymarine i70s Instrument Value Pack Speed Depth Wind T70226 -  
> *https://tinyurl.com/y9zumft6
> 
> *- $1600 cdn at Binnacle (I wouldn't mind if I could get water temp as
> well but don't know if that's an option with Raymarine).
>
> Another option - someone on this list suggested SailTimer as a better
> option for wind instruments.
>
> Thanks in advance
>
> Mark
>
>
>
> --
>
>
>
>
> There is no cure for birth and death save to enjoy the interval.
>   - George Santayana
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=I4Gt-kmFq8ECAZ6487R_pOPcBW3Cn765kbmlV0CBRlk&s=s5z1e2n-3hHYwUFxkCIdJ3V4mjxkQvvOQeADX_8_-ps&e=
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[John and Maryann Read via CnC-List]

HI Mark

 

Have been down this road with my ancient Standard Horizon system (wind, speed, 
depth).  Great system but has been out of production for 15+ years so parts are 
nonexistent.  A few years back had the same depth issue and solved with a new 
transducer and it works just fine.  Last season the wind direction died and 
replacement circuit board is not available so I decided to change.  I opted for 
the Raymarine  i50 / i60 system as best fit for my needs, functionality, 
pricing, availability and support.  Fred Street was a big help on this.

 

Essentially all transducers are made by Airmar.  Check 
http://www.airmartechnology.com/xref.html to see if there is one for your unit. 
 Order through Fred Street or check flea bay or if you’re lucky a lister might 
have one hanging around.  Fred may be able to help.  

 

If you are thinking of replacing the system and upgrading to an integrated one 
be sure you have NMEA compatibility especially to your wheel pilot and GPS.

 

Best of luck  

 

John and Maryann

Legacy III

1982 C&C 34

Noank, CT

 

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dr. Mark 
Bodnar via CnC-List
Sent: Tuesday, December 18, 2018 4:11 PM
To: C&C List
Cc: Dr. Mark Bodnar
Subject: Stus-List Depth sounder replacement

 

 

I'd appreciate some advice regarding a non-functioning depth sounder.

Near the end of the season my depth sounder started reading 0 no matter the 
condition.  I couldn't find any obvious explanation for the problem - but I'm 
thinking that the Autohelm depth and speedo are original to the 1986 boat - so 
likely better to suck it up and replace than to jury rig a repair or sink money 
into a new transducer.

Should I just replace the broken depth and worry about the speedo at at another 
time?  Anyone think it's better to do a whole package?

I have a Raymarine wheel pilot (waiting for me to install) - so I assume the 
smart move would be to stick with the same product line. Such as - Raymarine 
i40 Depth System with Thru-Hull Transducer E70142.  With the Binnacle a new 
depth sounder $340, and a new speedo ($350) combined for almost $700 - would I 
be better to add a whole package with wind instruments?

Raymarine i70s Instrument Value Pack Speed Depth Wind T70226 -  
https://tinyurl.com/y9zumft6 - $1600 cdn at Binnacle (I wouldn't mind if I 
could get water temp as well but don't know if that's an option with Raymarine).

Another option - someone on this list suggested SailTimer as a better option 
for wind instruments.

Thanks in advance

Mark

 

 

-- 
 
 
 
 
There is no cure for birth and death save to enjoy the interval.
  - George Santayana
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[dwight veinot via CnC-List]

Do the raymarine i70 package and do it right. You will love the display if
you can mount everything in a pod on the coach house over your companion
way entrance easily in view of all in the cockpit. You and crew will learn
to sail to apparent wind angle and with an added display you may be able to
show VMG wind. I use that sometimes with my older st 60 raymarine gear.
Controls for the wheel pilot work good in a pod on the binnacle guard with
remote control elsewhere if you want to spend a few extra $’s you wont
regret that in harsh conditions

On Tue, Dec 18, 2018 at 5:34 PM Frederick G Street via CnC-List <
cnc-list@cnc-list.com> wrote:

> Mark — I would NOT consider the i40 system for wind; your only choice for
> a wind transducer is one suitable only for power boats.
>
> The i70 is a nice system; and yes, you do get water temp with it, as the
> transducer is a single depth/speed/temp transducer.  And you get a much
> better wind transducer.
>
> — Fred
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(
>
> On Dec 18, 2018, at 3:10 PM, Dr. Mark Bodnar via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> I'd appreciate some advice regarding a non-functioning depth sounder.
>
> Near the end of the season my depth sounder started reading 0 no matter
> the condition.  I couldn't find any obvious explanation for the problem -
> but I'm thinking that the Autohelm depth and speedo are original to the
> 1986 boat - so likely better to suck it up and replace than to jury rig a
> repair or sink money into a new transducer.
>
> Should I just replace the broken depth and worry about the speedo at at
> another time?  Anyone think it's better to do a whole package?
>
> I have a Raymarine wheel pilot (waiting for me to install) - so I assume
> the smart move would be to stick with the same product line. Such as -
> Raymarine i40 Depth System with Thru-Hull Transducer E70142.  With the
> Binnacle a new depth sounder $340, and a new speedo ($350) combined for
> almost $700 - would I be better to add a whole package with wind
> instruments?
>
> Raymarine i70s Instrument Value Pack Speed Depth Wind T70226 -  
> *https://tinyurl.com/y9zumft6
>  *- $1600 cdn at Binnacle (I wouldn't mind
> if I could get water temp as well but don't know if that's an option with
> Raymarine).
>
> Another option - someone on this list suggested SailTimer as a better
> option for wind instruments.
>
> Thanks in advance
>
> Mark
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Sent from Gmail Mobile
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[Frederick G Street via CnC-List]

Mark — I would NOT consider the i40 system for wind; your only choice for a 
wind transducer is one suitable only for power boats.

The i70 is a nice system; and yes, you do get water temp with it, as the 
transducer is a single depth/speed/temp transducer.  And you get a much better 
wind transducer.

— Fred

Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(

> On Dec 18, 2018, at 3:10 PM, Dr. Mark Bodnar via CnC-List 
>  wrote:
> 
> I'd appreciate some advice regarding a non-functioning depth sounder.
> 
> Near the end of the season my depth sounder started reading 0 no matter the 
> condition.  I couldn't find any obvious explanation for the problem - but I'm 
> thinking that the Autohelm depth and speedo are original to the 1986 boat - 
> so likely better to suck it up and replace than to jury rig a repair or sink 
> money into a new transducer.
> 
> Should I just replace the broken depth and worry about the speedo at at 
> another time?  Anyone think it's better to do a whole package?
> 
> I have a Raymarine wheel pilot (waiting for me to install) - so I assume the 
> smart move would be to stick with the same product line. Such as - Raymarine 
> i40 Depth System with Thru-Hull Transducer E70142.  With the Binnacle a new 
> depth sounder $340, and a new speedo ($350) combined for almost $700 - would 
> I be better to add a whole package with wind instruments?
> 
> Raymarine i70s Instrument Value Pack Speed Depth Wind T70226 -  
> https://tinyurl.com/y9zumft6  - $1600 cdn at 
> Binnacle (I wouldn't mind if I could get water temp as well but don't know if 
> that's an option with Raymarine).
> 
> Another option - someone on this list suggested SailTimer as a better option 
> for wind instruments.
> 
> Thanks in advance
> 
> Mark
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth sounder replacement

[Rod Stright via CnC-List]

Will likely be on sale when the Boat Show starts in Toronto Jan 18

Sent from my iPhone

> On Dec 18, 2018, at 5:10 PM, Dr. Mark Bodnar via CnC-List 
>  wrote:
> 
> 
> I'd appreciate some advice regarding a non-functioning depth sounder.
> 
> Near the end of the season my depth sounder started reading 0 no matter the 
> condition.  I couldn't find any obvious explanation for the problem - but I'm 
> thinking that the Autohelm depth and speedo are original to the 1986 boat - 
> so likely better to suck it up and replace than to jury rig a repair or sink 
> money into a new transducer.
> 
> Should I just replace the broken depth and worry about the speedo at at 
> another time?  Anyone think it's better to do a whole package?
> 
> I have a Raymarine wheel pilot (waiting for me to install) - so I assume the 
> smart move would be to stick with the same product line. Such as - Raymarine 
> i40 Depth System with Thru-Hull Transducer E70142.  With the Binnacle a new 
> depth sounder $340, and a new speedo ($350) combined for almost $700 - would 
> I be better to add a whole package with wind instruments?
> 
> Raymarine i70s Instrument Value Pack Speed Depth Wind T70226 -  
> https://tinyurl.com/y9zumft6 - $1600 cdn at Binnacle (I wouldn't mind if I 
> could get water temp as well but don't know if that's an option with 
> Raymarine).
> 
> Another option - someone on this list suggested SailTimer as a better option 
> for wind instruments.
> 
> Thanks in advance
> 
> Mark
> 
> 
> 
> 
> 
> -- 
> 
> 
> 
> 
> There is no cure for birth and death save to enjoy the interval.
>   - George Santayana
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List depth sounder

[ahycrace via CnC-List]

Went to the boat today with a borrowed transducer to do some testing turned on 
the power and the depth worked perfectly. I don't know what to think I guess 
I'll  just keep an eye on it. Could the bottom be so soft there was no return 
signal or did the unit just know that surgery was imminent?
Gary K.    "liberty "


Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Marek Dziedzic via CnC-List 
 Date: 5/4/18  11:20 PM  (GMT-05:00) To: 
cnc-list@cnc-list.com Cc: Marek Dziedzic  Subject: Re: 
Stus-List depth sounder 




Possibly, just the connection (cable)?
 
Marek 
 
Sent from 
Mail for Windows 10
 


From: CnC-List  on behalf of ahycrace ahycrace 
via CnC-List 

Sent: Friday, May 4, 2018 8:07:32 PM

To: cnc-list@cnc-list.com

Cc: ahycrace ahycrace

Subject: Stus-List depth sounder
 


Well we went in the water today and everything was good except the 
depth sounder.  The  only thing that shows up on the readout is three
dashes  thinking the transducer is probably bad anyone been down
this path before. Raymarine st60s.



Gary K 
Liberty

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List depth sounder

[Marek Dziedzic via CnC-List]

Possibly, just the connection (cable)?

Marek

Sent from Mail for Windows 10


From: CnC-List  on behalf of ahycrace ahycrace 
via CnC-List 
Sent: Friday, May 4, 2018 8:07:32 PM
To: cnc-list@cnc-list.com
Cc: ahycrace ahycrace
Subject: Stus-List depth sounder


Well we went in the water today and everything was good except the

depth sounder.  The  only thing that shows up on the readout is three

dashes  thinking the transducer is probably bad anyone been down

this path before. Raymarine st60s.


Gary K

Liberty
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List depth sounder

[ahycrace via CnC-List]

Thanks gary see you at the club breakfast 


Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Gary Russell via CnC-List 
 Date: 5/4/18  8:43 PM  (GMT-05:00) To: C&C List 
 Cc: Gary Russell  Subject: Re: 
Stus-List depth sounder 
Hi Gary,     The best way to check it out is to borrow a transducer from 
someone else and plug it in.  See you tomorrow.GaryS/V Kaylarah'90 C&C 37+East 
Greenwich, RI, USA
~~~_/)~~



On Fri, May 4, 2018 at 8:07 PM, ahycrace ahycrace via CnC-List 
 wrote:



Well we went in the water today and everything was good except the depth 
sounder.  The  only thing that shows up on the readout is three dashes  
thinking the transducer is probably bad anyone been downthis path before. 
Raymarine st60s.
Gary K Liberty
 
___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray






___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List depth sounder

[Gary Russell via CnC-List]

Hi Gary,
 The best way to check it out is to borrow a transducer from someone
else and plug it in.  See you tomorrow.
Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA

~~~_/)~~


On Fri, May 4, 2018 at 8:07 PM, ahycrace ahycrace via CnC-List <
cnc-list@cnc-list.com> wrote:

> Well we went in the water today and everything was good except the
>
> depth sounder.  The  only thing that shows up on the readout is three
>
> dashes  thinking the transducer is probably bad anyone been down
>
> this path before. Raymarine st60s.
>
>
> Gary K
>
> Liberty
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Depth Sounder

[Paul Fountain via CnC-List]

The wind transducer. This is a low budget project to get his boat more fun for 
him to use.

Get Outlook for iOS<https://aka.ms/o0ukef>

From: CnC-List  on behalf of schiller via 
CnC-List 
Sent: Thursday, September 14, 2017 6:27:34 PM
To: Steven A. Demore; cnc-list@cnc-list.com
Cc: schiller
Subject: Re: Stus-List Depth Sounder

I'm confused.  Does your friend need the transducer (wind vane and cups) or the 
display.  The transducer is available from several sources (Defender, for one). 
 If you need the display, I have one.  Let me know.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/14/2017 6:11 PM, Steven A. Demore wrote:
I have the ST60 wind instruments on top of my mast.  I reached out to Raymarine 
and was told to throw them away, as you can’t buy an analog display them 
anymore, and they rarely work now.  I’d love to make it work, but know nothing 
about it.

Steve

SV Doin’ It Right
1973 C&C 30 MK1
Pasadena, MD

From: schiller [mailto:schil...@bloomingdalecom.net]
Sent: Thursday, September 14, 2017 9:15 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Subject: Re: Stus-List Depth Sounder

Paul,

No.  The transducer is at the bottom of Lake Michigan.  It went when the mast 
broke.  You can still get new transducers and cables.  I think it is $469 for 
the transducer and cable.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan
On 9/14/2017 8:36 AM, Paul Fountain via CnC-List wrote:
Neil,

Did you keep the wind transducer? I have a friend who needs one from an ST60 
(with cable if possible) …

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of schiller via 
CnC-List
Sent: Thursday, September 14, 2017 7:33 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: schiller <mailto:schil...@bloomingdalecom.net>
Subject: Re: Stus-List Depth Sounder

Alan,

I have an ST60 display unit available from the old Redwing 35 (as well as Speed 
and Wind).  I didn't try to remove any transducers.  The new boat came with 
i50/i60 instruments.

Make me an offer.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan
On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:
I'm looking for a new (used) display.  I tried a new transducer, and that 
didn't cure the problem.  I also checked all wiring from the transducer to the 
display.
Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Alan,

What exactly are you looking for? The thru-hull depth sounder? Display? 
Something else?

Best,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue 
Refit<https://urldefense.proofpoint.com/v2/url?u=http-3A__roninrebuild.blogspot.com_&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=eIF8X8ejTlkvrRl8eN8woM5Zq8qnpGpLov7Z4keioj4&e=>

On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Does anyone have a Depth sounder they want to sell or give away? I'm looking 
for a Raymarine
ST50, ST60 or ST60+

--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=>

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=

All Contributions are greatly appreciated!



--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR





___



This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray



All Contributions are greatly appreciated!





___



This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https

Re: Stus-List Depth Sounder

[Jim Watts via CnC-List]

I could use a new main, new genoa, and all new standing rigging, if anyone
has any lying around.

Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC

On 14 September 2017 at 15:27, schiller via CnC-List 
wrote:

> I'm confused.  Does your friend need the transducer (wind vane and cups)
> or the display.  The transducer is available from several sources
> (Defender, for one).  If you need the display, I have one.  Let me know.
>
> Neil Schiller
> 1983 C&C 35, Mark III, #028
> "Grace"
> White Lake, Michigan
>
> On 9/14/2017 6:11 PM, Steven A. Demore wrote:
>
> I have the ST60 wind instruments on top of my mast.  I reached out to
> Raymarine and was told to throw them away, as you can’t buy an analog
> display them anymore, and they rarely work now.  I’d love to make it work,
> but know nothing about it.
>
>
> Steve
>
>
>
> SV Doin’ It Right
> 1973 C&C 30 MK1
> Pasadena, MD
>
>
>
> *From:* schiller [mailto:schil...@bloomingdalecom.net
> ]
> *Sent:* Thursday, September 14, 2017 9:15 AM
> *To:* cnc-list@cnc-list.com
>
> *Subject:* Re: Stus-List Depth Sounder
>
>
>
> Paul,
>
> No.  The transducer is at the bottom of Lake Michigan.  It went when the
> mast broke.  You can still get new transducers and cables.  I think it is
> $469 for the transducer and cable.
>
> Neil Schiller
> 1983 C&C 35, Mark III, #028
> "Grace"
> White Lake, Michigan
>
> On 9/14/2017 8:36 AM, Paul Fountain via CnC-List wrote:
>
> Neil,
>
>
>
> Did you keep the wind transducer? I have a friend who needs one from an
> ST60 (with cable if possible) …
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com
> ] *On Behalf Of *schiller via CnC-List
> *Sent:* Thursday, September 14, 2017 7:33 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* schiller 
> 
> *Subject:* Re: Stus-List Depth Sounder
>
>
>
> Alan,
>
> I have an ST60 display unit available from the old Redwing 35 (as well as
> Speed and Wind).  I didn't try to remove any transducers.  The new boat
> came with i50/i60 instruments.
>
> Make me an offer.
>
> Neil Schiller
> 1983 C&C 35, Mark III, #028
> "Grace"
> White Lake, Michigan
>
> On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:
>
> I'm looking for a new (used) display.  I tried a new transducer, and that
> didn't cure the problem.  I also checked all wiring from the transducer to
> the display.
>
> Alan
>
>
>
> On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Alan,
>
>
>
> What exactly are you looking for? The thru-hull depth sounder? Display?
> Something else?
>
>
>
> Best,
>
> Dave Godwin
> 1982 C&C 37 - Ronin
> Reedville - Chesapeake Bay
>
> Ronin’s Overdue Refit
> <https://urldefense.proofpoint.com/v2/url?u=http-3A__roninrebuild.blogspot.com_&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=eIF8X8ejTlkvrRl8eN8woM5Zq8qnpGpLov7Z4keioj4&e=>
>
>
>
> On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>
>
> Does anyone have a Depth sounder they want to sell or give away? I'm
> looking for a Raymarine
>
> ST50, ST60 or ST60+
>
>
> --
>
> Alan Bergen
>
> 35 Mk III Thirsty
>
> Rose City YC
>
> Portland, OR
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
> <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=>
>
> All Contributions are greatly appreciated!
>
>
>
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.
> paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN
> 0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_
> vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=
> ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=
>
> All Contributions are greatly appreciated!
>
>
>
>
&g

Re: Stus-List Depth Sounder

[schiller via CnC-List]

I'm confused.  Does your friend need the transducer (wind vane and cups) 
or the display.  The transducer is available from several sources 
(Defender, for one).  If you need the display, I have one.  Let me know.


Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/14/2017 6:11 PM, Steven A. Demore wrote:


I have the ST60 wind instruments on top of my mast.  I reached out to 
Raymarine and was told to throw them away, as you can’t buy an analog 
display them anymore, and they rarely work now.  I’d love to make it 
work, but know nothing about it.



Steve

SV Doin’ It Right
1973 C&C 30 MK1
Pasadena, MD

*From:*schiller [mailto:schil...@bloomingdalecom.net]
*Sent:* Thursday, September 14, 2017 9:15 AM
*To:* cnc-list@cnc-list.com
*Subject:* Re: Stus-List Depth Sounder

Paul,

No.  The transducer is at the bottom of Lake Michigan.  It went when 
the mast broke.  You can still get new transducers and cables.  I 
think it is $469 for the transducer and cable.


Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/14/2017 8:36 AM, Paul Fountain via CnC-List wrote:

Neil,

Did you keep the wind transducer? I have a friend who needs one
from an ST60 (with cable if possible) …

*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf
Of *schiller via CnC-List
*Sent:* Thursday, September 14, 2017 7:33 AM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* schiller 
<mailto:schil...@bloomingdalecom.net>
*Subject:* Re: Stus-List Depth Sounder

Alan,

I have an ST60 display unit available from the old Redwing 35 (as
well as Speed and Wind).  I didn't try to remove any transducers. 
The new boat came with i50/i60 instruments.

Make me an offer.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:

I'm looking for a new (used) display.  I tried a new
transducer, and that didn't cure the problem.  I also checked
all wiring from the transducer to the display.

Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:

Alan,

What exactly are you looking for? The thru-hull depth
sounder? Display? Something else?

Best,

Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay

Ronin’s Overdue Refit

<https://urldefense.proofpoint.com/v2/url?u=http-3A__roninrebuild.blogspot.com_&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=eIF8X8ejTlkvrRl8eN8woM5Zq8qnpGpLov7Z4keioj4&e=>

On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List
mailto:cnc-list@cnc-list.com>>
wrote:

Does anyone have a Depth sounder they want to sell or
give away? I'm looking for a Raymarine

ST50, ST60 or ST60+


-- 


Alan Bergen

35 Mk III Thirsty

Rose City YC

Portland, OR

___

This list is supported by the generous donations of
our members. If you wish to make a contribution to
offset our costs, please go to:
https://www.paypal.me/stumurray

<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=>

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our
members. If you wish to make a contribution to offset our
costs, please go to:

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=

All Contributions are greatly appreciated!




-- 


Alan Bergen

35 Mk III Thirsty

Rose City YC

Portland, OR





___

  


This list is supported by the generous donations of our members. If you 
wish to make a contribution to offset our costs

Re: Stus-List Depth Sounder

[ALAN BERGEN via CnC-List]

Neil:

I responded directly to your email address.  Check your spam file.

Alan

On Thu, Sep 14, 2017 at 4:32 AM, schiller via CnC-List <
cnc-list@cnc-list.com> wrote:

> Alan,
>
> I have an ST60 display unit available from the old Redwing 35 (as well as
> Speed and Wind).  I didn't try to remove any transducers.  The new boat
> came with i50/i60 instruments.
>
> Make me an offer.
>
> Neil Schiller
> 1983 C&C 35, Mark III, #028
> "Grace"
> White Lake, Michigan
>
> On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:
>
> I'm looking for a new (used) display.  I tried a new transducer, and that
> didn't cure the problem.  I also checked all wiring from the transducer to
> the display.
>
> Alan
>
> On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Alan,
>>
>> What exactly are you looking for? The thru-hull depth sounder? Display?
>> Something else?
>>
>> Best,
>> Dave Godwin
>> 1982 C&C 37 - Ronin
>> Reedville - Chesapeake Bay
>> Ronin’s Overdue Refit
>> 
>>
>> On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>> Does anyone have a Depth sounder they want to sell or give away? I'm
>> looking for a Raymarine
>> ST50, ST60 or ST60+
>>
>> --
>> Alan Bergen
>> 35 Mk III Thirsty
>> Rose City YC
>> Portland, OR
>> ___
>>
>> This list is supported by the generous donations of our members. If you
>> wish to make a contribution to offset our costs, please go to:
>> https://www.paypal.me/stumurray
>> 
>>
>> All Contributions are greatly appreciated!
>>
>>
>>
>> ___
>>
>> This list is supported by the generous donations of our members. If you
>> wish to make a contribution to offset our costs, please go to:
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.pay
>> pal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H
>> 8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=
>> _vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4
>> UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=
>>
>> All Contributions are greatly appreciated!
>>
>>
>
>
> --
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
>
>
> ___
>
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray 
> 
>
> All Contributions are greatly appreciated!
>
>
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.pay
> pal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H
> 8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=
> ojQIQC0gFUbor84fnsV4iRAFeDokAcW1BqhoUTlC6XI&s=2kTh-BoqVocIEW
> m1m3tHJWVk8Jsf4QVLEHdxY9UMoLE&e=
>
> All Contributions are greatly appreciated!
>
>


-- 
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth Sounder

[schiller via CnC-List]

Paul,

No.  The transducer is at the bottom of Lake Michigan.  It went when the 
mast broke.  You can still get new transducers and cables.  I think it 
is $469 for the transducer and cable.


Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/14/2017 8:36 AM, Paul Fountain via CnC-List wrote:


Neil,

Did you keep the wind transducer? I have a friend who needs one from 
an ST60 (with cable if possible) …


*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of 
*schiller via CnC-List

*Sent:* Thursday, September 14, 2017 7:33 AM
*To:* cnc-list@cnc-list.com
*Cc:* schiller 
*Subject:* Re: Stus-List Depth Sounder

Alan,

I have an ST60 display unit available from the old Redwing 35 (as well 
as Speed and Wind).  I didn't try to remove any transducers.  The new 
boat came with i50/i60 instruments.


Make me an offer.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:

I'm looking for a new (used) display.  I tried a new transducer,
and that didn't cure the problem.  I also checked all wiring from
the transducer to the display.

Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:

Alan,

What exactly are you looking for? The thru-hull depth sounder?
Display? Something else?

Best,

Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay

Ronin’s Overdue Refit

<https://urldefense.proofpoint.com/v2/url?u=http-3A__roninrebuild.blogspot.com_&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=eIF8X8ejTlkvrRl8eN8woM5Zq8qnpGpLov7Z4keioj4&e=>

On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:

Does anyone have a Depth sounder they want to sell or give
away? I'm looking for a Raymarine

ST50, ST60 or ST60+


-- 


Alan Bergen

35 Mk III Thirsty

Rose City YC

Portland, OR

___

This list is supported by the generous donations of our
members. If you wish to make a contribution to offset our
costs, please go to: https://www.paypal.me/stumurray

<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=>

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our
members. If you wish to make a contribution to offset our
costs, please go to:

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=

All Contributions are greatly appreciated!




-- 


Alan Bergen

35 Mk III Thirsty

Rose City YC

Portland, OR




___

This list is supported by the generous donations of our members. If you 
wish to make a contribution to offset our costs, please go 
to:https://www.paypal.me/stumurray

All Contributions are greatly appreciated!



___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth Sounder

[Hoyt, Mike via CnC-List]

I have a ST 60 wind transducer.  Needs new cups etc and the cable was cut but I 
believe I still have the rest of the cable as well.

It is in Halifax, NS

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul 
Fountain via CnC-List
Sent: Thursday, September 14, 2017 9:37 AM
To: cnc-list@cnc-list.com
Cc: Paul Fountain
Subject: Re: Stus-List Depth Sounder

Neil,

Did you keep the wind transducer? I have a friend who needs one from an ST60 
(with cable if possible) …

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of schiller via 
CnC-List
Sent: Thursday, September 14, 2017 7:33 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: schiller mailto:schil...@bloomingdalecom.net>>
Subject: Re: Stus-List Depth Sounder

Alan,

I have an ST60 display unit available from the old Redwing 35 (as well as Speed 
and Wind).  I didn't try to remove any transducers.  The new boat came with 
i50/i60 instruments.

Make me an offer.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan
On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:
I'm looking for a new (used) display.  I tried a new transducer, and that 
didn't cure the problem.  I also checked all wiring from the transducer to the 
display.
Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Alan,

What exactly are you looking for? The thru-hull depth sounder? Display? 
Something else?

Best,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue 
Refit<https://urldefense.proofpoint.com/v2/url?u=http-3A__roninrebuild.blogspot.com_&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=eIF8X8ejTlkvrRl8eN8woM5Zq8qnpGpLov7Z4keioj4&e=>

On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Does anyone have a Depth sounder they want to sell or give away? I'm looking 
for a Raymarine
ST50, ST60 or ST60+

--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=>

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=

All Contributions are greatly appreciated!



--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



___



This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray



All Contributions are greatly appreciated!

___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth Sounder

[Paul Fountain via CnC-List]

Neil,

Did you keep the wind transducer? I have a friend who needs one from an ST60 
(with cable if possible) …

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of schiller via 
CnC-List
Sent: Thursday, September 14, 2017 7:33 AM
To: cnc-list@cnc-list.com
Cc: schiller 
Subject: Re: Stus-List Depth Sounder

Alan,

I have an ST60 display unit available from the old Redwing 35 (as well as Speed 
and Wind).  I didn't try to remove any transducers.  The new boat came with 
i50/i60 instruments.

Make me an offer.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan
On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:
I'm looking for a new (used) display.  I tried a new transducer, and that 
didn't cure the problem.  I also checked all wiring from the transducer to the 
display.
Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Alan,

What exactly are you looking for? The thru-hull depth sounder? Display? 
Something else?

Best,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue 
Refit<https://urldefense.proofpoint.com/v2/url?u=http-3A__roninrebuild.blogspot.com_&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=eIF8X8ejTlkvrRl8eN8woM5Zq8qnpGpLov7Z4keioj4&e=>

On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Does anyone have a Depth sounder they want to sell or give away? I'm looking 
for a Raymarine
ST50, ST60 or ST60+

--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwMFaQ&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=>

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=

All Contributions are greatly appreciated!



--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR




___



This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray



All Contributions are greatly appreciated!

___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth Sounder

[schiller via CnC-List]

Alan,

I have an ST60 display unit available from the old Redwing 35 (as well 
as Speed and Wind).  I didn't try to remove any transducers. The new 
boat came with i50/i60 instruments.


Make me an offer.

Neil Schiller
1983 C&C 35, Mark III, #028
"Grace"
White Lake, Michigan

On 9/13/2017 10:41 PM, ALAN BERGEN via CnC-List wrote:
I'm looking for a new (used) display.  I tried a new transducer, and 
that didn't cure the problem.  I also checked all wiring from the 
transducer to the display.


Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:


Alan,

What exactly are you looking for? The thru-hull depth sounder?
Display? Something else?

Best,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit




On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:

Does anyone have a Depth sounder they want to sell or give away?
I'm looking for a Raymarine
ST50, ST60 or ST60+

-- 
Alan Bergen

35 Mk III Thirsty
Rose City YC
Portland, OR
___

This list is supported by the generous donations of our members.
If you wish to make a contribution to offset our costs, please go
to: https://www.paypal.me/stumurray



All Contributions are greatly appreciated!



___

This list is supported by the generous donations of our members.
If you wish to make a contribution to offset our costs, please go
to:

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=



All Contributions are greatly appreciated!




--
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!


___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth Sounder

[ALAN BERGEN via CnC-List]

I'm looking for a new (used) display.  I tried a new transducer, and that
didn't cure the problem.  I also checked all wiring from the transducer to
the display.

Alan

On Wed, Sep 13, 2017 at 6:47 PM, Dave Godwin via CnC-List <
cnc-list@cnc-list.com> wrote:

> Alan,
>
> What exactly are you looking for? The thru-hull depth sounder? Display?
> Something else?
>
> Best,
> Dave Godwin
> 1982 C&C 37 - Ronin
> Reedville - Chesapeake Bay
> Ronin’s Overdue Refit
> 
>
> On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Does anyone have a Depth sounder they want to sell or give away? I'm
> looking for a Raymarine
> ST50, ST60 or ST60+
>
> --
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
> 
>
> All Contributions are greatly appreciated!
>
>
>
> ___
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.
> paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN
> 0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=_
> vNM6yAaofhDZb0QiQ1ykrWHLQsuV7QkfD3iuEoRDv4&s=
> ei31g5YE0junQ4UcQ5cyHb8bD0ZLqia-uZN53HFcRuc&e=
>
> All Contributions are greatly appreciated!
>
>


-- 
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth Sounder

[Dave Godwin via CnC-List]

Alan,

What exactly are you looking for? The thru-hull depth sounder? Display? 
Something else?

Best,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit 
> On Sep 13, 2017, at 9:27 PM, ALAN BERGEN via CnC-List  
> wrote:
> 
> Does anyone have a Depth sounder they want to sell or give away? I'm looking 
> for a Raymarine
> ST50, ST60 or ST60+
> 
> -- 
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
> ___
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!

___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Re: Stus-List Depth sounder installation

[Frederick G Street via CnC-List]

Mike — part of the reason to use a backing block is to make sure you have a 
flat spot in the rounded hull to mount the transducer; it’s not so much for 
reinforcement.  It also gives you more of the shaft of the transducer to seal 
with whatever goop you use as a sealant; I use LifeSeal when I install 
transducers.  Goop up the flange and bottom several threads of the transducer, 
and HAND-tighten the nut inside on top of the rubber gasket; then come back a 
day later and tighten the nut a bit more, if it will easily turn.

If your location is really flat, go ahead and mount without a block; but I 
would recommend using the gasket from the manufacturer.  Then if your boat 
sinks and you can prove you followed Airmar’s instructions, you can sue them…   
:^)

— Fred



Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(

> On Apr 1, 2017, at 4:45 PM, Michael Crombie via CnC-List 
>  wrote:
> 
> Hi gang,
> 
> Last fall I wrote about removing my depth sounder as water was leaking in.  
> It was a traditional external depth sounder with a mushroom head.  It was 
> held in place with a locking nut that screwed down against a wood backing 
> block. 
> 
> I dug out the rotten wood and ground down all the glass that had been used to 
> hold it in place. The installation was really overkill.  I wasn't able to 
> remove the transducer without stripping the threads, so I bought a new one.
> 
> I now have a smooth, pretty flat surface around the transducer hole. I bought 
> the same transducer (Raymarine, i.e. Airmar,)
> 
> So here are my questions:
> 
> 1. I have made up a fibreglass backing block, but do I really need a backing 
> block given that there really aren't any stresses on the transducer?  It's 
> not like a through-hull where you are opening and closing a valve.
> 
> 2. The new transducer came with a rubber washer that sits on the inside and 
> the locking nut is supposed to be hand tightened down onto it. Is this really 
> a good idea? Won't the rubber shrink a bit with age?
> 
> 3. For my sealant, is there any difference between 3M 4200 and Sikaflex 291 
> sealant/adhesive? I'm not sure if the Sikaflex is suitable for underwater 
> applications. 
> 
> My current thought is to use the backing plate given that I've made it up 
> already and skip rubber washer.
> 
> Thanks,
> 
> Mike
> Atacama. 33mkii
> Toronto 

___

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!