Re: Stus-List C 25 mark 1 1973 slippery non skid

[David Knecht via CnC-List]

I did not have good luck with the Aurora Sure Step.  I had better luck with 
Woody Wax and still use it on my side decks 
(http://www.woody-wax.com/fiberglass-non-skid-deck-wax.php 
).  It is slippery 
at first until you get all the wax off, so be careful just after application.  
In my cockpit, I used Kiwi grip and it is great.  Still holding up after 3 
years.  Cockpit was a fairly easy job while the whole deck would be a much 
bigger undertaking.  Dave

Dr. David Knecht
Professor, Department of Molecular and Cell Biology 
University of Connecticut   
91 N. Eagleville Rd.
U-3125
Storrs, CT 06269-3125
860-486-2200

> On Mar 19, 2019, at 7:11 PM, alain hogue via CnC-List  
> wrote:
> 
> I just bought a C 25 mark 1 1973 and my non skid is very slippery when I am 
> working on deck barefoot. Do you have somekind of trick to make it less 
> slippery because I dont want to paint it with Kiwigrip and I want to keep the 
> original gelcoat on it
>  
> Provenance : Courrier  pour 
> Windows 10
>  
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray 
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 25 mark 1 1973 slippery non skid

[Hoyt, Mike via CnC-List]

Sand e3ck and apply kiwifruit grip. Will be great and look even better

The 25-1 is a fabulous boat. Congratulations

Mike
Persistence
Halifax

From: CnC-List [cnc-list-boun...@cnc-list.com] on behalf of schiller via 
CnC-List [cnc-list@cnc-list.com]
Sent: March 19, 2019 10:19 PM
To: cnc-list@cnc-list.com
Cc: schiller
Subject: Re: Stus-List C 25 mark 1 1973 slippery non skid

You could try Aurora Marine's Sure Step first.  A paste wax that is supposed to 
restore non slip.  tried some on our old Southcoast 23.  Seemed to work pretty 
well.  Sold her shortly after application to buy our Redwing 35 (C 35-1) so I 
didn't get a feel for how long it lasted.  I am a fan of Aurora products.  
Richard Kittar, the owner used to hang out on the list way back when.

Neil Schiller
1983 C 35-3, #028, "Grace"
Crosswinds Marine, Whitehall, Michigan
WLYC

On 3/19/2019 7:11 PM, alain hogue via CnC-List wrote:
I just bought a C 25 mark 1 1973 and my non skid is very slippery when I am 
working on deck barefoot. Do you have somekind of trick to make it less 
slippery because I dont want to paint it with Kiwigrip and I want to keep the 
original gelcoat on it

Provenance : Courrier<https://go.microsoft.com/fwlink/?LinkId=550986> pour 
Windows 10




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 25 mark 1 1973 slippery non skid

[schiller via CnC-List]

You could try Aurora Marine's Sure Step first.  A paste wax that is 
supposed to restore non slip.  tried some on our old Southcoast 23.  
Seemed to work pretty well.  Sold her shortly after application to buy 
our Redwing 35 (C 35-1) so I didn't get a feel for how long it 
lasted.  I am a fan of Aurora products.  Richard Kittar, the owner used 
to hang out on the list way back when.


Neil Schiller
1983 C 35-3, #028, "Grace"
Crosswinds Marine, Whitehall, Michigan
WLYC

On 3/19/2019 7:11 PM, alain hogue via CnC-List wrote:


I just bought a C 25 mark 1 1973 and _my non skid is very slippery_ 
when I am working on deck barefoot. Do you have somekind of trick to 
make it less slippery because I dont want to paint it with Kiwigrip 
and I want to keep the original gelcoat on it


Provenance : Courrier  
pour Windows 10



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 25 mark 1 1973 slippery non skid

[WILLIAM WALKER via CnC-List]

Kiwi can be tinted by any paint shop...home depot, Lowe's, etc...and a few 
years ago kiwi would give a guarantee...happy or replace.
Did my cockpit sole 5 years ago, still looks like original I think...get a 
handful of color cards and match yours,take kiwi to home depot and you will be 
happy
Bill Walker 
C 36
Pentwater, Mi..

Bill Walker 
On Tuesday, March 19, 2019 Charlie Nelson via CnC-List  
wrote:
I appreciate your desire to keep the original gel coat but I have had the yard 
do the ‘standard’ application using gel coat similar to Dennis’ suggestion. 
A few years later it needed it again and I had them use Kiwi. It is now about 6 
years out and it’s still good—plus it’s easy for me to apply when needed to 
limited areas.
Of course my deck is white so the Kiwi white matched well. Don’t know if Kiwi 
can be tinted but it may be worth a call to them. 
I doubt any of the mixtures of gelcoat plus x, y or z roughening agents will 
hold up/last as long as Kiwi.
Charlie Nelson1995 C 36 XL/kcbWater Phantom

Sent from AOL Mobile Mail
Get the new AOL app: mail.mobile.aol.com
 On Tuesday, March 19, 2019, Dennis C. via CnC-List  
wrote:

The best answer is to re-new the gelcoat nonskid.  Tape the are, mix colloidal 
silica with the gelcoat and roll it on with a honeycomb roller.
https://www.amazon.com/Dynamic-HH010418-Wizard-Finishing-Honeycomb/dp/B00DDNNZEY

Barring that, try surfboard wax:  https://www.sexwax.com/
Dennis C.
On Tue, Mar 19, 2019 at 6:12 PM alain hogue via CnC-List 
 wrote:


I just bought a C 25 mark 1 1973 and my non skid is very slippery when I am 
working on deck barefoot. Do you have somekind of trick to make it less 
slippery because I dont want to paint it with Kiwigrip and I want to keep the 
original gelcoat on it

 

Provenance : Courrier pour Windows 10

 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 25 mark 1 1973 slippery non skid

[Charlie Nelson via CnC-List]

I appreciate your desire to keep the original gel coat but I have had the yard 
do the ‘standard’ application using gel coat similar to Dennis’ suggestion. 
A few years later it needed it again and I had them use Kiwi. It is now about 6 
years out and it’s still good—plus it’s easy for me to apply when needed to 
limited areas.
Of course my deck is white so the Kiwi white matched well. Don’t know if Kiwi 
can be tinted but it may be worth a call to them. 
I doubt any of the mixtures of gelcoat plus x, y or z roughening agents will 
hold up/last as long as Kiwi.
Charlie Nelson1995 C 36 XL/kcbWater Phantom

Sent from AOL Mobile Mail
Get the new AOL app: mail.mobile.aol.com
 On Tuesday, March 19, 2019, Dennis C. via CnC-List  
wrote:

The best answer is to re-new the gelcoat nonskid.  Tape the are, mix colloidal 
silica with the gelcoat and roll it on with a honeycomb roller.
https://www.amazon.com/Dynamic-HH010418-Wizard-Finishing-Honeycomb/dp/B00DDNNZEY

Barring that, try surfboard wax:  https://www.sexwax.com/
Dennis C.
On Tue, Mar 19, 2019 at 6:12 PM alain hogue via CnC-List 
 wrote:


I just bought a C 25 mark 1 1973 and my non skid is very slippery when I am 
working on deck barefoot. Do you have somekind of trick to make it less 
slippery because I dont want to paint it with Kiwigrip and I want to keep the 
original gelcoat on it

 

Provenance : Courrier pour Windows 10

 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 25 mark 1 1973 slippery non skid

[Dennis C. via CnC-List]

The best answer is to re-new the gelcoat nonskid.  Tape the are, mix
colloidal silica with the gelcoat and roll it on with a honeycomb roller.

https://www.amazon.com/Dynamic-HH010418-Wizard-Finishing-Honeycomb/dp/B00DDNNZEY

Barring that, try surfboard wax:  https://www.sexwax.com/

Dennis C.

On Tue, Mar 19, 2019 at 6:12 PM alain hogue via CnC-List <
cnc-list@cnc-list.com> wrote:

> I just bought a C 25 mark 1 1973 and * my non skid is very slippery*
> when I am working on deck barefoot. Do you have somekind of trick to make
> it less slippery because I dont want to paint it with Kiwigrip and I want
> to keep the original gelcoat on it
>
>
>
> Provenance : Courrier 
> pour Windows 10
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List C 25 mark 1 1973 slippery non skid

[alain hogue via CnC-List]

I just bought a C 25 mark 1 1973 and my non skid is very slippery when I am 
working on deck barefoot. Do you have somekind of trick to make it less 
slippery because I dont want to paint it with Kiwigrip and I want to keep the 
original gelcoat on it

Provenance : Courrier pour 
Windows 10

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List C 25 MARK 1

[Mark McMenamy via CnC-List]

Thanks Jimmy,

That's really neat that you bought one of the first one's off the factory 
floor.   Thanks for the information.  I think this little boat is going to be a 
blast.

Mark McMenamy
"Icicle" C 25
Fort Pierce FL

> On Jan 25, 2016, at 11:17 PM, Jimmy Kelly via CnC-List 
>  wrote:
> 
> owned c 25 mk1 one of the first back in jan 1973  purchased from c sales 
> in bronte oakville show room...raced it very succesfully on lake ontario that 
> summer then in late sept  left for south  ...thru oswego canal  erie canal 
> hudson river to atlantic  sailed coast to florida ...ft lauderdale...was 
> approached by c sales at fla. dock  ,,,offered by c much larger custom 
> built bruckmann yacht.,  the c in house custom builder,..took the 
> dealdelivered 25 to ryder  fla yacht sales ..sad parting  but beginning 
> of a life time adventurethey had firm offer for my 25 from person who we 
> raced against in his c designed 27ftmust say of 6 yachts i have sailed 
>   the mk1 25  was best performer  ,best  fun boat, one of best 
> built,,,would have loved to keep both but could not...tried to buy it years 
> later,.but owner not interested25 mk1 best boat i ever ownedbuilt by 
> hinterholler mfg in n on lake  the standard production line of c in feb 
> 1973this model  
 began production mid 1972  & sales slow until 1973..yacht designed by in house 
design with very close direction ..by both georges,cuthbertson...   
second owner of my 25  won more than it share of races over the years 
.jimmy  c design  redline 41 mk1  #1of two built..  currently.southern 
british  columbia canada
> ___
> 
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom 
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> 

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Stus-List C 25 MARK 1

[Jimmy Kelly via CnC-List]

owned c 25 mk1 one of the first back in jan 1973  purchased from c
sales in bronte oakville show room...raced it very succesfully on lake
ontario that summer then in late sept  left for south  ...thru oswego canal
 erie canal hudson river to atlantic  sailed coast to florida ...ft
lauderdale...was approached by c sales at fla. dock  ,,,offered by c
much larger custom built bruckmann yacht.,  the c in house custom
builder,..took the dealdelivered 25 to ryder  fla yacht sales ..sad
parting  but beginning of a life time adventurethey had firm offer for
my 25 from person who we raced against in his c designed 27ftmust say
of 6 yachts i have sailed   the mk1 25  was best performer  ,best
 fun boat, one of best built,,,would have loved to keep both but could
not...tried to buy it years later,.but owner not interested25 mk1 best
boat i ever ownedbuilt by hinterholler mfg in n on lake  the standard
production line of c in feb 1973this model  began production mid 1972
 & sales slow until 1973..yacht designed by in house design with very close
direction ..by both georges,cuthbertson...   second owner of my 25
 won more than it share of races over the years .jimmy  c design
 redline 41 mk1  #1of two built..  currently.southern british  columbia
canada
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com