Re: Stus-List C 37 Centerboard

[Andrew Burton via CnC-List]

I propose we all bring our boats to Rick's place. We can have biweekly C 
rendezvous all winter!
I'm seriously tempted. Let's discuss bringing Peregrine down for next year, 
Rick...if you can accommodate 7 1/2'.

Andy
C 40
Peregrine

Andrew Burton
61 W Narragansett
Newport, RI 
USA02840

http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260

> On Oct 11, 2017, at 21:53, Rick Brass via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> Trekkie, Trekker, it’s just another example of the Vulcan principal of 
> infinite diversity in infinite combinations.
>  
> And you can avoid the winter depression by bringing Enterprise down to 
> Washington. I’ll find you a slip close to Imzadi, you can come down and sail 
> Enterprise on weekends (think high 60s on New Year’s Day), and it will  cost 
> a lot less for the slip than for your haul out and winter storage.
>  
> Live Long and Prosper,
>  
> Rick Brass
> Washington, NC
>  
>  
>  
>  
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd 
> Schillay via CnC-List
> Sent: Tuesday, October 10, 2017 8:47 PM
> To: cnc-list@cnc-list.com
> Cc: Edd Schillay <e...@schillay.com>
> Subject: Re: Stus-List C 37 Centerboard
>  
> As I understand it, fans of the original series (Kirk, Spock) called 
> themselves Trekkies throughout the 60’s, 70’s and most of the 80’s. When The 
> Next Generation (Picard, Riker) gained steam, those fans called themselves 
> Trekkies as well, much to the dismay of the original series fans, who 
> consider the more “pure”. 
>  
> So, the fans of the original show, the more pure version of Trek, started 
> calling themselves Trekkers to distinguish themselves from the others. 
>  
> Forgive me for going off topic. Hauling the boat for the winter tomorrow and 
> need to deal with the depression. 
>  
> Edd M Schillay (Trekker)
> C 37+ | Starship Enterprise 
> NCC-1701-B
> City Island, NY
>  
>  
> On Oct 10, 2017, at 7:33 PM, Chuck Gilchrest via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> As long as he lives long and prospers, I think he’s ok with it..
> Chuck G.
> 
> Sent from my iPhone
> 
> On Oct 10, 2017, at 7:06 PM, Frederick G Street via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> Um…. I think Ken may have meant “Trekker”…   :^)
>  
> From Wikipedia:
>  
> There is considerable disagreement among Star Trek fans over whether to use 
> the term Trekkie or Trekker. Some say that Trekkie is "frequently 
> depreciative", thus, "not an acceptable term to serious fans", who prefer 
> Trekker.
>  
> — Fred
> 
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
>  
> On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List <cnc-list@cnc-list.com> 
> wrote:
>  
> Don't worry, we still hold you in high esteem, and you are still our 
> favourite Trekkie.
>  
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Rick Brass via CnC-List]

Trekkie, Trekker, it’s just another example of the Vulcan principal of infinite 
diversity in infinite combinations.

 

And you can avoid the winter depression by bringing Enterprise down to 
Washington. I’ll find you a slip close to Imzadi, you can come down and sail 
Enterprise on weekends (think high 60s on New Year’s Day), and it will  cost a 
lot less for the slip than for your haul out and winter storage.

 

Live Long and Prosper,

 

Rick Brass

Washington, NC

 

 

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay 
via CnC-List
Sent: Tuesday, October 10, 2017 8:47 PM
To: cnc-list@cnc-list.com
Cc: Edd Schillay <e...@schillay.com>
Subject: Re: Stus-List C 37 Centerboard

 

As I understand it, fans of the original series (Kirk, Spock) called themselves 
Trekkies throughout the 60’s, 70’s and most of the 80’s. When The Next 
Generation (Picard, Riker) gained steam, those fans called themselves Trekkies 
as well, much to the dismay of the original series fans, who consider the more 
“pure”. 

 

So, the fans of the original show, the more pure version of Trek, started 
calling themselves Trekkers to distinguish themselves from the others. 

 

Forgive me for going off topic. Hauling the boat for the winter tomorrow and 
need to deal with the depression. 

 

Edd M Schillay (Trekker)

C 37+ | Starship Enterprise 

NCC-1701-B

City Island, NY

 

 

On Oct 10, 2017, at 7:33 PM, Chuck Gilchrest via CnC-List 
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote:

As long as he lives long and prospers, I think he’s ok with it..

Chuck G.

Sent from my iPhone


On Oct 10, 2017, at 7:06 PM, Frederick G Street via CnC-List 
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote:

Um…. I think Ken may have meant “Trekker”…   :^)

 

>From Wikipedia:

 

There is considerable disagreement among Star Trek fans over whether to use the 
term Trekkie or Trekker. Some say that Trekkie is "frequently depreciative", 
thus, "not an acceptable term to serious fans", who prefer Trekker.

 

— Fred


Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI

 

On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List <cnc-list@cnc-list.com 
<mailto:cnc-list@cnc-list.com> > wrote:

 

Don't worry, we still hold you in high esteem, and you are still our favourite 
Trekkie.

 

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Ken Heaton via CnC-List]

Well I just learned something new...

Ken H.

On 10 October 2017 at 21:47, Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:

> As I understand it, fans of the original series (Kirk, Spock) called
> themselves Trekkies throughout the 60’s, 70’s and most of the 80’s. When
> The Next Generation (Picard, Riker) gained steam, those fans called
> themselves Trekkies as well, much to the dismay of the original series
> fans, who consider the more “pure”.
>
> So, the fans of the original show, the more pure version of Trek, started
> calling themselves Trekkers to distinguish themselves from the others.
>
> Forgive me for going off topic. Hauling the boat for the winter tomorrow
> and need to deal with the depression.
>
> Edd M Schillay (Trekker)
> C 37+ | Starship Enterprise
> NCC-1701-B
> City Island, NY
>
>
> On Oct 10, 2017, at 7:33 PM, Chuck Gilchrest via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> As long as he lives long and prospers, I think he’s ok with it..
> Chuck G.
>
> Sent from my iPhone
>
> On Oct 10, 2017, at 7:06 PM, Frederick G Street via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Um…. I *think* Ken may have meant “Trekker”…   :^)
>
> From Wikipedia:
>
> There is considerable disagreement among Star Trek fans over whether to
> use the term Trekkie or Trekker. Some say that Trekkie is
> "frequently depreciative", thus, "not an acceptable term to serious fans",
> who prefer Trekker.
>
>
> — Fred
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
>
> On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Don't worry, we still hold you in high esteem, and you are still our
> favourite Trekkie.
>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Edd Schillay via CnC-List]

As I understand it, fans of the original series (Kirk, Spock) called themselves 
Trekkies throughout the 60’s, 70’s and most of the 80’s. When The Next 
Generation (Picard, Riker) gained steam, those fans called themselves Trekkies 
as well, much to the dismay of the original series fans, who consider the more 
“pure”. 

So, the fans of the original show, the more pure version of Trek, started 
calling themselves Trekkers to distinguish themselves from the others. 

Forgive me for going off topic. Hauling the boat for the winter tomorrow and 
need to deal with the depression. 

Edd M Schillay (Trekker)
C 37+ | Starship Enterprise 
NCC-1701-B
City Island, NY


On Oct 10, 2017, at 7:33 PM, Chuck Gilchrest via CnC-List 
 wrote:

As long as he lives long and prospers, I think he’s ok with it..
Chuck G.

Sent from my iPhone

> On Oct 10, 2017, at 7:06 PM, Frederick G Street via CnC-List 
>  wrote:
> 
> Um…. I think Ken may have meant “Trekker”…   :^)
> 
> From Wikipedia:
> 
>> There is considerable disagreement among Star Trek fans over whether to use 
>> the term Trekkie or Trekker. Some say that Trekkie is "frequently 
>> depreciative", thus, "not an acceptable term to serious fans", who prefer 
>> Trekker.
> 
> — Fred
> 
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
> 
>> On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List  
>> wrote:
>> 
>> Don't worry, we still hold you in high esteem, and you are still our 
>> favourite Trekkie.
> 
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[bobmor99 . via CnC-List]

Thank you all (y'all) for all the info and advice.
--Bob M

On Tue, Oct 10, 2017 at 7:33 PM, Chuck Gilchrest via CnC-List <
cnc-list@cnc-list.com> wrote:

> As long as he lives long and prospers, I think he’s ok with it..
> Chuck G.
>
> Sent from my iPhone
>
> On Oct 10, 2017, at 7:06 PM, Frederick G Street via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Um…. I *think* Ken may have meant “Trekker”…   :^)
>
> From Wikipedia:
>
> There is considerable disagreement among Star Trek fans over whether to
> use the term Trekkie or Trekker. Some say that Trekkie is
> "frequently depreciative", thus, "not an acceptable term to serious fans",
> who prefer Trekker.
>
>
> — Fred
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
>
> On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Don't worry, we still hold you in high esteem, and you are still our
> favourite Trekkie.
>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Chuck Gilchrest via CnC-List]

As long as he lives long and prospers, I think he’s ok with it..
Chuck G.

Sent from my iPhone

> On Oct 10, 2017, at 7:06 PM, Frederick G Street via CnC-List 
>  wrote:
> 
> Um…. I think Ken may have meant “Trekker”…   :^)
> 
> From Wikipedia:
> 
>> There is considerable disagreement among Star Trek fans over whether to use 
>> the term Trekkie or Trekker. Some say that Trekkie is "frequently 
>> depreciative", thus, "not an acceptable term to serious fans", who prefer 
>> Trekker.
> 
> — Fred
> 
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
> 
>> On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List  
>> wrote:
>> 
>> Don't worry, we still hold you in high esteem, and you are still our 
>> favourite Trekkie.
> 
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Frederick G Street via CnC-List]

Um…. I think Ken may have meant “Trekker”…   :^)

From Wikipedia:

> There is considerable disagreement among Star Trek fans over whether to use 
> the term Trekkie or Trekker. Some say that Trekkie is "frequently 
> depreciative", thus, "not an acceptable term to serious fans", who prefer 
> Trekker.

— Fred

Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI

> On Oct 10, 2017, at 5:01 PM, Ken Heaton via CnC-List  
> wrote:
> 
> Don't worry, we still hold you in high esteem, and you are still our 
> favourite Trekkie.

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Ken Heaton via CnC-List]

Sorry Edd, I thought it may have been you who posted sketch that but I
wasn't positive.  Don't worry, we still hold you in high esteem, and you
are still our favourite Trekkie.

;-)

Ken H.

On 10 October 2017 at 16:35, Edd Schillay via CnC-List <
cnc-list@cnc-list.com> wrote:

> I know my number of posts have decreased lately, but I didn’t think I’d
> ever be relegated to “someone else”… sigh….
>
> All the best,
>
> Edd
>
>
> Edd M. Schillay
> Starship Enterprise
> C 37+ | Sail No: NCC-1701-B
> City Island, NY
> Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>
>
>
>
> On Oct 10, 2017, at 3:28 PM, Ken Heaton via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> If this helps at all, this is a link to a sketch of the Centreboard
> installation for the C 37/40+ CB: https://c-c-37-40.blogspot.ca/2017/08/
> construction-drawings.html
>
> Someone else on the list provided this to us all some time ago.
>
> Ken H.
>
> On 10 October 2017 at 13:34, Charlie Nelson via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> My 36XL/kcb is of a different vintage but I believe it was a slightly
>> scaled down version of the C 37/40 of the late 80s/early 90s. Yours may
>> be very different.
>>
>> FWIW, the center boards of the above vintages were fiberglass filled with
>> lead. On my 36, the board weighs about 1000 lbs.
>>
>> My pin is ~ 4 inches in diameter SS--it will never need replaced although
>> it may need to be removed to fully access the entire board.
>>
>> After I my pennant separated about 6 years ago (while the board was up of
>> course!), the board swung on the pin and when it hit the trunk, the board
>> was torn apart and went to the bottom. AFAIK, the pin is accessed by
>> removing the fiberglass on both its ends and 'driving' it out, which the
>> yard had to do
>> to install a newly fabricated board. I consider this a big job--YMMV. The
>> pin is supported by SS brackets bolted into the trunk on both sides, which
>> are then glassed over
>> to match the centerboard foil.
>>
>> If your board is weighted, be VERY CAREFUL working to free it up. If it
>> is weighted, with or without a pennant, and it lets go suddenly, no part of
>> a human
>> body will stop it. Even if the pennant is attached, the shock loading
>> on it or the fittings of the board when it falls down to its normal sailing
>> position, could
>> cause damage to the boat and potentially destroy the board or at least
>> pull the fittings out.
>>
>> I keep my clean mostly by using it (dropping the board down for upwind
>> racing) and trying to have it down when the bottom is cleaned in the water
>> before a race,
>> which is approximately monthly.
>>
>> The cb boats of the above vintages (probably other manufacturers as well)
>> require that the board be at least partially inside the trunk even when in
>> the fully down position,
>> which is determined by the pennant stop on the C, usually on the cabin
>> top.
>>
>> If the pennant fails, the board will extend outside the trunk without any
>> athwartship support and MUST NOT be sailed under these conditions since the
>> board and pin may
>> be wrenched out of the boat. This would turn a bad day into a REALLY BAD
>> day.
>>
>> Charlie Nelson
>> Water Phantom
>> 1995 C 36 XL/kcb
>>
>>
>>
>>
>>
>>
>>
>> cenel...@aol.com
>>
>>
>> -Original Message-
>> From: bobmor99 . via CnC-List <cnc-list@cnc-list.com>
>> To: cnc-list <cnc-list@cnc-list.com>
>> Cc: bobmor99 . <bobmo...@gmail.com>
>> Sent: Tue, Oct 10, 2017 10:47 am
>> Subject: Stus-List C 37 Centerboard
>>
>> I've read Donald Sebastian's earlier thread and hope it's OK to start a
>> new, but related, one.
>>
>> I'm looking at a 1983 C 37-P K/CB.
>> (The "P" stands for Project Boat).
>>
>> One of the issues is that the centerboard pennant is likely unattached.
>> When the boat was hauled ~5 months ago, the centerboard descended
>> partially (I'm told). This makes me think the pin is in place and that
>> barnacles prevented a full extension.
>>
>> 1) Is the centerboard fiberglass? Is it heavy?
>> 2) If pin replacement is needed is that a big job?
>> 3) How are the centerboard and trunk kept clean? Floss?  :-)
>>
>> Thanks in advance.
>> --Bob M
>> ___
>>
>> The bills have started coming in for th

Re: Stus-List C 37 Centerboard

[Persuasion37 via CnC-List]

Hi Bob

Here are a few pictures of my board.  Approx weight is 300 - 400 lbs.

https://drive.google.com/drive/mobile/folders/0B1YsbvO03cClZkhpejlvbFNIUTQ

Any questions give me a shout.

Mike
PERSUASION
C 37 K/CB
Long Sault

> On Oct 10, 2017, at 10:46 AM, bobmor99 . via CnC-List  
> wrote:
> 
> I've read Donald Sebastian's earlier thread and hope it's OK to start a new, 
> but related, one.
> 
> I'm looking at a 1983 C 37-P K/CB. 
> (The "P" stands for Project Boat).
> 
> One of the issues is that the centerboard pennant is likely unattached.
> When the boat was hauled ~5 months ago, the centerboard descended partially 
> (I'm told). This makes me think the pin is in place and that barnacles 
> prevented a full extension. 
> 
> 1) Is the centerboard fiberglass? Is it heavy?
> 2) If pin replacement is needed is that a big job?
> 3) How are the centerboard and trunk kept clean? Floss?  :-)
> 
> Thanks in advance.
> --Bob M
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Edd Schillay via CnC-List]

I know my number of posts have decreased lately, but I didn’t think I’d ever be 
relegated to “someone else”… sigh…. 

All the best,

Edd


Edd M. Schillay
Starship Enterprise
C 37+ | Sail No: NCC-1701-B
City Island, NY 
Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>



> On Oct 10, 2017, at 3:28 PM, Ken Heaton via CnC-List <cnc-list@cnc-list.com> 
> wrote:
> 
> If this helps at all, this is a link to a sketch of the Centreboard 
> installation for the C 37/40+ CB: 
> https://c-c-37-40.blogspot.ca/2017/08/construction-drawings.html 
> <https://c-c-37-40.blogspot.ca/2017/08/construction-drawings.html>
> 
> Someone else on the list provided this to us all some time ago.
> 
> Ken H.
> 
> On 10 October 2017 at 13:34, Charlie Nelson via CnC-List 
> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
> My 36XL/kcb is of a different vintage but I believe it was a slightly scaled 
> down version of the C 37/40 of the late 80s/early 90s. Yours may be very 
> different.
>  
> FWIW, the center boards of the above vintages were fiberglass filled with 
> lead. On my 36, the board weighs about 1000 lbs.
>  
> My pin is ~ 4 inches in diameter SS--it will never need replaced although it 
> may need to be removed to fully access the entire board.
>  
> After I my pennant separated about 6 years ago (while the board was up of 
> course!), the board swung on the pin and when it hit the trunk, the board
> was torn apart and went to the bottom. AFAIK, the pin is accessed by removing 
> the fiberglass on both its ends and 'driving' it out, which the yard had to do
> to install a newly fabricated board. I consider this a big job--YMMV. The pin 
> is supported by SS brackets bolted into the trunk on both sides, which are 
> then glassed over
> to match the centerboard foil.
>  
> If your board is weighted, be VERY CAREFUL working to free it up. If it is 
> weighted, with or without a pennant, and it lets go suddenly, no part of a 
> human
> body will stop it. Even if the pennant is attached, the shock loading on it 
> or the fittings of the board when it falls down to its normal sailing 
> position, could
> cause damage to the boat and potentially destroy the board or at least pull 
> the fittings out.
>  
> I keep my clean mostly by using it (dropping the board down for upwind 
> racing) and trying to have it down when the bottom is cleaned in the water 
> before a race,
> which is approximately monthly.
>  
> The cb boats of the above vintages (probably other manufacturers as well) 
> require that the board be at least partially inside the trunk even when in 
> the fully down position,
> which is determined by the pennant stop on the C, usually on the cabin top.
>  
> If the pennant fails, the board will extend outside the trunk without any 
> athwartship support and MUST NOT be sailed under these conditions since the 
> board and pin may
> be wrenched out of the boat. This would turn a bad day into a REALLY BAD day.
>  
> Charlie Nelson
> Water Phantom
> 1995 C 36 XL/kcb
>  
>  
>  
>  
>  
>  
>  
> cenel...@aol.com <mailto:cenel...@aol.com>
>  
>  
> -Original Message-
> From: bobmor99 . via CnC-List <cnc-list@cnc-list.com 
> <mailto:cnc-list@cnc-list.com>>
> To: cnc-list <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>>
> Cc: bobmor99 . <bobmo...@gmail.com <mailto:bobmo...@gmail.com>>
> Sent: Tue, Oct 10, 2017 10:47 am
> Subject: Stus-List C 37 Centerboard
> 
> I've read Donald Sebastian's earlier thread and hope it's OK to start a new, 
> but related, one.
> 
> I'm looking at a 1983 C 37-P K/CB. 
> (The "P" stands for Project Boat).
> 
> One of the issues is that the centerboard pennant is likely unattached.
> When the boat was hauled ~5 months ago, the centerboard descended partially 
> (I'm told). This makes me think the pin is in place and that barnacles 
> prevented a full extension. 
> 
> 1) Is the centerboard fiberglass? Is it heavy?
> 2) If pin replacement is needed is that a big job?
> 3) How are the centerboard and trunk kept clean? Floss?  :-)
> 
> Thanks in advance.
> --Bob M
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again. 
> October will be our fund raising month. Please consider sending a small 
> contribution to help keep this list running. Use PayPal to send contribution 
> --https://www.paypal.me/stumurray <https://www.paypal.me/stumurray>
> 
> All contributions are greatly appreciated!
> 
> ___
> 
> The bills have started coming

Re: Stus-List C 37 Centerboard

[Ken Heaton via CnC-List]

Sorry, you have to scroll down a bit on that page but it is there.

Here is another link to the same drawing:
https://drive.google.com/file/d/0B7X4Y5iVFYAKR0lrdU9WUHREVGs/view

Ken H.

On 10 October 2017 at 16:28, Ken Heaton <kenhea...@gmail.com> wrote:

> If this helps at all, this is a link to a sketch of the Centreboard
> installation for the C 37/40+ CB: https://c-c-37-40.blogspot.ca/2017/08/
> construction-drawings.html
>
> Someone else on the list provided this to us all some time ago.
>
> Ken H.
>
> On 10 October 2017 at 13:34, Charlie Nelson via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> My 36XL/kcb is of a different vintage but I believe it was a slightly
>> scaled down version of the C 37/40 of the late 80s/early 90s. Yours may
>> be very different.
>>
>> FWIW, the center boards of the above vintages were fiberglass filled with
>> lead. On my 36, the board weighs about 1000 lbs.
>>
>> My pin is ~ 4 inches in diameter SS--it will never need replaced although
>> it may need to be removed to fully access the entire board.
>>
>> After I my pennant separated about 6 years ago (while the board was up of
>> course!), the board swung on the pin and when it hit the trunk, the board
>> was torn apart and went to the bottom. AFAIK, the pin is accessed by
>> removing the fiberglass on both its ends and 'driving' it out, which the
>> yard had to do
>> to install a newly fabricated board. I consider this a big job--YMMV. The
>> pin is supported by SS brackets bolted into the trunk on both sides, which
>> are then glassed over
>> to match the centerboard foil.
>>
>> If your board is weighted, be VERY CAREFUL working to free it up. If it
>> is weighted, with or without a pennant, and it lets go suddenly, no part of
>> a human
>> body will stop it. Even if the pennant is attached, the shock loading
>> on it or the fittings of the board when it falls down to its normal sailing
>> position, could
>> cause damage to the boat and potentially destroy the board or at least
>> pull the fittings out.
>>
>> I keep my clean mostly by using it (dropping the board down for upwind
>> racing) and trying to have it down when the bottom is cleaned in the water
>> before a race,
>> which is approximately monthly.
>>
>> The cb boats of the above vintages (probably other manufacturers as well)
>> require that the board be at least partially inside the trunk even when in
>> the fully down position,
>> which is determined by the pennant stop on the C, usually on the cabin
>> top.
>>
>> If the pennant fails, the board will extend outside the trunk without any
>> athwartship support and MUST NOT be sailed under these conditions since the
>> board and pin may
>> be wrenched out of the boat. This would turn a bad day into a REALLY BAD
>> day.
>>
>> Charlie Nelson
>> Water Phantom
>> 1995 C 36 XL/kcb
>>
>>
>>
>>
>>
>>
>>
>> cenel...@aol.com
>>
>>
>> -Original Message-
>> From: bobmor99 . via CnC-List <cnc-list@cnc-list.com>
>> To: cnc-list <cnc-list@cnc-list.com>
>> Cc: bobmor99 . <bobmo...@gmail.com>
>> Sent: Tue, Oct 10, 2017 10:47 am
>> Subject: Stus-List C 37 Centerboard
>>
>> I've read Donald Sebastian's earlier thread and hope it's OK to start a
>> new, but related, one.
>>
>> I'm looking at a 1983 C 37-P K/CB.
>> (The "P" stands for Project Boat).
>>
>> One of the issues is that the centerboard pennant is likely unattached.
>> When the boat was hauled ~5 months ago, the centerboard descended
>> partially (I'm told). This makes me think the pin is in place and that
>> barnacles prevented a full extension.
>>
>> 1) Is the centerboard fiberglass? Is it heavy?
>> 2) If pin replacement is needed is that a big job?
>> 3) How are the centerboard and trunk kept clean? Floss?  :-)
>>
>> Thanks in advance.
>> --Bob M
>> ___
>>
>> The bills have started coming in for the year 2018 and have gone up
>> again. October will be our fund raising month. Please consider sending a
>> small contribution to help keep this list running. Use PayPal to send
>> contribution -- https://www.paypal.me/stumurray
>>
>> All contributions are greatly appreciated!
>>
>> ___
>>
>> The bills have started coming in for the year 2018 and have gone up
>> again.  October will be our fund raising month.  Please consider sending a
>> small contribution to help keep this list running.  Use PayPal to send
>> contribution --   https://www.paypal.me/stumurray
>>
>> All contributions are greatly appreciated!
>>
>>
>
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Ken Heaton via CnC-List]

If this helps at all, this is a link to a sketch of the Centreboard
installation for the C 37/40+ CB:
https://c-c-37-40.blogspot.ca/2017/08/construction-drawings.html

Someone else on the list provided this to us all some time ago.

Ken H.

On 10 October 2017 at 13:34, Charlie Nelson via CnC-List <
cnc-list@cnc-list.com> wrote:

> My 36XL/kcb is of a different vintage but I believe it was a slightly
> scaled down version of the C 37/40 of the late 80s/early 90s. Yours may
> be very different.
>
> FWIW, the center boards of the above vintages were fiberglass filled with
> lead. On my 36, the board weighs about 1000 lbs.
>
> My pin is ~ 4 inches in diameter SS--it will never need replaced although
> it may need to be removed to fully access the entire board.
>
> After I my pennant separated about 6 years ago (while the board was up of
> course!), the board swung on the pin and when it hit the trunk, the board
> was torn apart and went to the bottom. AFAIK, the pin is accessed by
> removing the fiberglass on both its ends and 'driving' it out, which the
> yard had to do
> to install a newly fabricated board. I consider this a big job--YMMV. The
> pin is supported by SS brackets bolted into the trunk on both sides, which
> are then glassed over
> to match the centerboard foil.
>
> If your board is weighted, be VERY CAREFUL working to free it up. If it is
> weighted, with or without a pennant, and it lets go suddenly, no part of a
> human
> body will stop it. Even if the pennant is attached, the shock loading
> on it or the fittings of the board when it falls down to its normal sailing
> position, could
> cause damage to the boat and potentially destroy the board or at least
> pull the fittings out.
>
> I keep my clean mostly by using it (dropping the board down for upwind
> racing) and trying to have it down when the bottom is cleaned in the water
> before a race,
> which is approximately monthly.
>
> The cb boats of the above vintages (probably other manufacturers as well)
> require that the board be at least partially inside the trunk even when in
> the fully down position,
> which is determined by the pennant stop on the C, usually on the cabin
> top.
>
> If the pennant fails, the board will extend outside the trunk without any
> athwartship support and MUST NOT be sailed under these conditions since the
> board and pin may
> be wrenched out of the boat. This would turn a bad day into a REALLY BAD
> day.
>
> Charlie Nelson
> Water Phantom
> 1995 C 36 XL/kcb
>
>
>
>
>
>
>
> cenel...@aol.com
>
>
> -Original Message-----
> From: bobmor99 . via CnC-List <cnc-list@cnc-list.com>
> To: cnc-list <cnc-list@cnc-list.com>
> Cc: bobmor99 . <bobmo...@gmail.com>
> Sent: Tue, Oct 10, 2017 10:47 am
> Subject: Stus-List C 37 Centerboard
>
> I've read Donald Sebastian's earlier thread and hope it's OK to start a
> new, but related, one.
>
> I'm looking at a 1983 C 37-P K/CB.
> (The "P" stands for Project Boat).
>
> One of the issues is that the centerboard pennant is likely unattached.
> When the boat was hauled ~5 months ago, the centerboard descended
> partially (I'm told). This makes me think the pin is in place and that
> barnacles prevented a full extension.
>
> 1) Is the centerboard fiberglass? Is it heavy?
> 2) If pin replacement is needed is that a big job?
> 3) How are the centerboard and trunk kept clean? Floss?  :-)
>
> Thanks in advance.
> --Bob M
> ___
>
> The bills have started coming in for the year 2018 and have gone up again.
> October will be our fund raising month. Please consider sending a small
> contribution to help keep this list running. Use PayPal to send
> contribution -- https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Charlie Nelson via CnC-List]

My 36XL/kcb is of a different vintage but I believe it was a slightly scaled 
down version of the C 37/40 of the late 80s/early 90s. Yours may be very 
different.
 
FWIW, the center boards of the above vintages were fiberglass filled with lead. 
On my 36, the board weighs about 1000 lbs.
 
My pin is ~ 4 inches in diameter SS--it will never need replaced although it 
may need to be removed to fully access the entire board. 

After I my pennant separated about 6 years ago (while the board was up of 
course!), the board swung on the pin and when it hit the trunk, the board
was torn apart and went to the bottom. AFAIK, the pin is accessed by removing 
the fiberglass on both its ends and 'driving' it out, which the yard had to do
to install a newly fabricated board. I consider this a big job--YMMV. The pin 
is supported by SS brackets bolted into the trunk on both sides, which are then 
glassed over
to match the centerboard foil.

If your board is weighted, be VERY CAREFUL working to free it up. If it is 
weighted, with or without a pennant, and it lets go suddenly, no part of a human
body will stop it. Even if the pennant is attached, the shock loading on it or 
the fittings of the board when it falls down to its normal sailing position, 
could
cause damage to the boat and potentially destroy the board or at least pull the 
fittings out.

I keep my clean mostly by using it (dropping the board down for upwind racing) 
and trying to have it down when the bottom is cleaned in the water before a 
race,
which is approximately monthly.

The cb boats of the above vintages (probably other manufacturers as well) 
require that the board be at least partially inside the trunk even when in the 
fully down position,
which is determined by the pennant stop on the C, usually on the cabin top.

If the pennant fails, the board will extend outside the trunk without any 
athwartship support and MUST NOT be sailed under these conditions since the 
board and pin may
be wrenched out of the boat. This would turn a bad day into a REALLY BAD day.

Charlie Nelson
Water Phantom
1995 C 36 XL/kcb 






 
cenel...@aol.com

 
 
-Original Message-
From: bobmor99 . via CnC-List <cnc-list@cnc-list.com>
To: cnc-list <cnc-list@cnc-list.com>
Cc: bobmor99 . <bobmo...@gmail.com>
Sent: Tue, Oct 10, 2017 10:47 am
Subject: Stus-List C 37 Centerboard



I've read Donald Sebastian's earlier thread and hope it's OK to start a new, 
but related, one.


I'm looking at a 1983 C 37-P K/CB. 
(The "P" stands for Project Boat).


One of the issues is that the centerboard pennant is likely unattached.
When the boat was hauled ~5 months ago, the centerboard descended partially 
(I'm told). This makes me think the pin is in place and that barnacles 
prevented a full extension. 


1) Is the centerboard fiberglass? Is it heavy?
2) If pin replacement is needed is that a big job?
3) How are the centerboard and trunk kept clean? Floss?  :-)


Thanks in advance.
--Bob M


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[bushmark4--- via CnC-List]

 Bob, I guess they're all project boats in one form or another!  But the good 
news is that there's lots of help available: there are several 37 owners on the 
list who can be if help to you: see also Dave Godin's site, 
http://roninrebuild.blogspot.com/   Dave is a frequent contributor here and can 
tell you about every square inch of a 37!


Call Fred Street for anything electronic;


send photos!
 



Richard
s/v Bushmark4: 1985 C 37 CB;  Ohio River, Mile 584.4




Richard N. Bush 
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462 
502-584-7255

 

 

-Original Message-
From: bobmor99 . via CnC-List <cnc-list@cnc-list.com>
To: cnc-list <cnc-list@cnc-list.com>
Cc: bobmor99 . <bobmo...@gmail.com>
Sent: Tue, Oct 10, 2017 10:47 am
Subject: Stus-List C 37 Centerboard



I've read Donald Sebastian's earlier thread and hope it's OK to start a new, 
but related, one.


I'm looking at a 1983 C 37-P K/CB. 
(The "P" stands for Project Boat).


One of the issues is that the centerboard pennant is likely unattached.
When the boat was hauled ~5 months ago, the centerboard descended partially 
(I'm told). This makes me think the pin is in place and that barnacles 
prevented a full extension. 


1) Is the centerboard fiberglass? Is it heavy?
2) If pin replacement is needed is that a big job?
3) How are the centerboard and trunk kept clean? Floss?  :-)


Thanks in advance.
--Bob M


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 Centerboard

[Donald Sebastian via CnC-List]

Bob,

I have been working on writing down how I ended up fixing my centerboard issue. 
  I had to get get creative and was actually able to do everything in the water.

If I don’t respond to  your questions later, shoot me an  email later in the 
week when i will have a moment to think.

Donald




> On Oct 10, 2017, at 10:46 AM, bobmor99 . via CnC-List  
> wrote:
> 
> I've read Donald Sebastian's earlier thread and hope it's OK to start a new, 
> but related, one.
> 
> I'm looking at a 1983 C 37-P K/CB. 
> (The "P" stands for Project Boat).
> 
> One of the issues is that the centerboard pennant is likely unattached.
> When the boat was hauled ~5 months ago, the centerboard descended partially 
> (I'm told). This makes me think the pin is in place and that barnacles 
> prevented a full extension. 
> 
> 1) Is the centerboard fiberglass? Is it heavy?
> 2) If pin replacement is needed is that a big job?
> 3) How are the centerboard and trunk kept clean? Floss?  :-)
> 
> Thanks in advance.
> --Bob M
> ___
> 
> The bills have started coming in for the year 2018 and have gone up again.  
> October will be our fund raising month.  Please consider sending a small 
> contribution to help keep this list running.  Use PayPal to send contribution 
> --   https://www.paypal.me/stumurray
> 
> All contributions are greatly appreciated!


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Stus-List C 37 Centerboard

[bobmor99 . via CnC-List]

I've read Donald Sebastian's earlier thread and hope it's OK to start a
new, but related, one.

I'm looking at a 1983 C 37-P K/CB.
(The "P" stands for Project Boat).

One of the issues is that the centerboard pennant is likely unattached.
When the boat was hauled ~5 months ago, the centerboard descended partially
(I'm told). This makes me think the pin is in place and that barnacles
prevented a full extension.

1) Is the centerboard fiberglass? Is it heavy?
2) If pin replacement is needed is that a big job?
3) How are the centerboard and trunk kept clean? Floss?  :-)

Thanks in advance.
--Bob M
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List C 37 centerboard

[Paul Fountain via CnC-List]

I have a 33-II with a centreboard whose pendant broke a couple of years ago. I 
had Rob From South Shore yachts make and install the new one. They had an eye 
fitting roll swagged on the lower end, which the fed down and attached with a 
pin to the board, then hand swagged 2 fittings to make the eye on the deck end.

When hauled the board swung just far enough forward to allow you to reach up 
and remove and replace the pin. Have a new pin ready! Ours was just about worse 
thru.

Sent from Outlook Mobile




On Tue, Apr 26, 2016 at 8:59 AM -0700, "Stephen deForest via CnC-List" 
> wrote:

Good day everyone. I purchased a 1983 37 with a centerboard last November and I 
have found out that the centerboard pennant has broken, probably the original 
cable. Has anyone replaced theirs? If so has anyone gone with a super strength 
rope of similar size instead of a new cable? Obviously the boat has to be 
lifted to work on the board and what are people using to fasten to the pin on 
the board? One last question, is there a trick to getting the new line or cable 
fed from deck level to the board?

Thanks in advance

Steve deForest
Saint John NB
sdefor...@bellaliant.net
___

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Stus-List C 37 centerboard

[Stephen deForest via CnC-List]

Good day everyone. I purchased a 1983 37 with a centerboard last November and I 
have found out that the centerboard pennant has broken, probably the original 
cable. Has anyone replaced theirs? If so has anyone gone with a super strength 
rope of similar size instead of a new cable? Obviously the boat has to be 
lifted to work on the board and what are people using to fasten to the pin on 
the board? One last question, is there a trick to getting the new line or cable 
fed from deck level to the board? 

Thanks in advance

Steve deForest
Saint John NB
sdefor...@bellaliant.net___

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!