Re: [Cooker] 6Gb Ram
I also just installed redhat 9.0 to test and it does work.. One more suggestion for this group these are hyper threading processors so Redhat shows 4 processors on a dual processor machine. Mandrake is not listed on the os page that supports it. http://www.intel.com/support/platform/ht/os.htm On Mon, 2003-07-28 at 10:11, Ray Carlino wrote: Yep tried that too. No help On Mon, 2003-07-28 at 09:52, magic wrote: It's been awhile, but at one time I recall you could define the amount of memory in lilo.conf. lilo.conf man: append= Appends the options specified to the parameter line passed to the kernel. This is typically used to specify parameters of hardware that can't be entirely auto-detected or for which prob- ing may be dangerous. Multiple kernel parameters are separated by a blank space, and the string must be enclosed in double quotes. Append may be used only once per "image=" section. Example: append="mem=96M hd=576,64,32 console=ttyS1,9600" I also remember that you need to run lilo Before you reboot. Thanks, S Ray Carlino wrote: > Using 9.1... > I have a Dell 2650 servers (9 of them) with 6GB Ram. > I tried to recompile the enterprise kernel with 64GB ram support (BigMem) > I still only see 4Gb ram.. Any Ideas? I tried Mandrake support and > they said if that don't work then they can't help. > I called Dell and they said it works with Redhat... > > > -- > Ray Carlino <[EMAIL PROTECTED] > > -- Ray Carlino <[EMAIL PROTECTED]> -- Ray Carlino <[EMAIL PROTECTED]>
Re: [Cooker] 6Gb Ram
Yep tried that too. No help On Mon, 2003-07-28 at 09:52, magic wrote: It's been awhile, but at one time I recall you could define the amount of memory in lilo.conf. lilo.conf man: append= Appends the options specified to the parameter line passed to the kernel. This is typically used to specify parameters of hardware that can't be entirely auto-detected or for which prob- ing may be dangerous. Multiple kernel parameters are separated by a blank space, and the string must be enclosed in double quotes. Append may be used only once per "image=" section. Example: append="mem=96M hd=576,64,32 console=ttyS1,9600" I also remember that you need to run lilo Before you reboot. Thanks, S Ray Carlino wrote: > Using 9.1... > I have a Dell 2650 servers (9 of them) with 6GB Ram. > I tried to recompile the enterprise kernel with 64GB ram support (BigMem) > I still only see 4Gb ram.. Any Ideas? I tried Mandrake support and > they said if that don't work then they can't help. > I called Dell and they said it works with Redhat... > > > -- > Ray Carlino <[EMAIL PROTECTED] > > -- Ray Carlino <[EMAIL PROTECTED]>
[Cooker] 6Gb Ram
Using 9.1... I have a Dell 2650 servers (9 of them) with 6GB Ram. I tried to recompile the enterprise kernel with 64GB ram support (BigMem) I still only see 4Gb ram.. Any Ideas? I tried Mandrake support and they said if that don't work then they can't help. I called Dell and they said it works with Redhat... -- Ray Carlino <[EMAIL PROTECTED]>
[Cooker] enterprise kernel
I just bought 8 new Dell servers and need to put Mandrake 9.1 or 9.2 on them .. The problem is they have 6GB Ram and the enterprise kernel is only built for 4GB. So as a suggestion can you start building the kernel with 64GB support? And second is there a config file of the enterprise kernel around that I can use to rebuild with 64GB support? I want all of the same options that are built in now but more memory.. Thanks -- Ray Carlino <[EMAIL PROTECTED]>
[Cooker] Mandrake 9.0 and I845G and DMA
I am having same problem with Dell 4500 machines. Is there a fix yet??? I have heard maybe 2.4.20 kernel fixes this problem. Hi all I've got a problem with my Intel I845G chipset (Asus motherboard). I reported this bug in the middle of september. The patch When the system boots I recieve the errors found in "lines from /var/dmesg". In that case it is impossible to activate the dma mode for my ide harddrive. The problem is that I need this performance for burning cdroms or watching dvds. I also tried the patch that I found in another message in this mailinglist, but the same result. It would be great if someone may help me.. Philipp Haefelfinger uname -r 2.4.19-16mdk end --- lines from /var/dmesg Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: (ide_setup_pci_device:) Could not enable device. end -- lspcidrake - agpgart : Intel Corporation|82845 845 Chipset Host Bridge (MCH) [BRIDGE_HOST] (vendor:8086 device:2560 subv:1043 subd:8093) unknown : Intel Corp.|82845G/GL [Brookdale-G] Chipset AGP Bridge [BRIDGE_PCI] (vendor:8086 device:2561) usb-uhci : Intel Corporation|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c2 subv:1043 subd:8089) usb-uhci : Intel Corporation|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c4 subv:1043 subd:8089) usb-uhci : Intel Corporation|82801DB USB Controller [SERIAL_USB] (vendor:8086 device:24c7 subv:1043 subd:8089) ehci-hcd : Intel Corporation|82801DB USB Enhanced Controller [SERIAL_USB] (vendor:8086 device:24cd subv:1043 subd:8089) unknown : Intel Corporation|82820 815e (Camino 2) Chipset PCI [BRIDGE_PCI] (vendor:8086 device:244e) unknown : Intel Corporation|82801DB 845G/GL Chipset ISA Bridge (ICH4) [BRIDGE_ISA] (vendor:8086 device:24c0) unknown : Intel Corporation|82801DB 845G/GL Chipset IDE Controller [STORAGE_IDE] (vendor:8086 device:24cb subv:1043 subd:8089) Card:NVIDIA GeForce (fbdev): NVidia|NV25 [GeForce4 Ti4600] [DISPLAY_VGA] (vendor:10de device:0250 subv:1043 subd:8013) eepro100 : Intel Corporation|EtherExpress PRO/100 [NETWORK_ETHERNET] (vendor:8086 device:103a subv:1043 subd:8071) snd-emu10k1 : Creative Labs|SB Live! (audio) [MULTIMEDIA_AUDIO] (vendor:1102 device:0002 subv:1102 subd:8064) emu10k1-gp : Creative Labs|SB Live! (joystick) [INPUT_OTHER] (vendor:1102 device:7002 subv:1102 subd:0020) bttv : Brooktree Corporation|Bt848 TV with DMA push [MULTIMEDIA_VIDEO] (vendor:109e device:0350) unknown : Virtual|Hub [] (vendor: device:) unknown : Virtual|Hub [] (vendor: device:) unknown : Virtual|Hub [] (vendor: device:) unknown : Virtual|Hub [] (vendor: device:) end
Re: [Cooker] debugging distribution kernel
I have and am still running several machines with athlons and Mandrake. I have 3 dual processor athlons and 3 single athlons running right now. One of the duals is running beta 4 and soon rc1 hopefully. The problems I have had in the past with athons is the video card. On Tue, 2002-03-12 at 11:22, Laing A. K. wrote: > > Hi, > > Ever since the betas of Mandrake 8.0, through 8.1, through 8.2, I have > never been able to run a Mandrake distribution kernel on my Athlon > desktop PC. (Sounds outrageous, I know). 7.1 and 7.2 used to work. > > Just so you know I know my way around Linux: I have successfully > installed 8.0 and 8.1 and 8.2, both on a PC with Pentium 200MMX, and a > Celeron Laptop. But my main desktop is a Gateway Athlon select > 900Mhz, 256M Ram, 15G Hard drive. That is the most powerful of my > three machines. That is the only one that has had this problem of not > being able to run the distribution kernel. > > In each case Mandrake installs fine, up till the point of configuring > X, and rebooting. On rebooting, soon after the line that says "Init > version d.dd booting", it hangs, very reliably. It used to do this on > 8.0 and 8.0 with Init version 2.78, and now with Init version 2.83. > > In each case I have solved the problem by booting into redhat (dual > boot), and compiling a kernel for mandrake, and this works fine when I > get the kernel sources from www.kernel.org. > > While investigating this problem I also created a way of cross-booting > so that I could use a Redhat kernel to boot the Mandrake distribution, > or use the Mandrake kernel to boot the Redhat distribution. The > Redhat kernel *can* boot the Mandrake distribution, but the Mandrake > kernel *can't* boot the Redhat distribution either. > > However I would *really* *love* the luxury of not having to do a > kernel compile each time I install mandrake. As you can tell I'm > always installing the latest Mandrake release, even despite this > problem. > > What can I do to figure out what causes this problem? It is obviously > something about the way Mandrake modifies the kernel which they get > from Linus, which does not work well with some quirk of my hardware, > ... > > Any ideas and suggestions are welcome. > > Thanks, > > Ambrose L > >
Re: [Cooker] Re: 8.2 Beta 4 Installer BUGs with Installer Themes
Date sent: Thu, 07 Mar 2002 23:20:17 +0100 From: Pixel <[EMAIL PROTECTED]> Subject:[Cooker] Re: 8.2 Beta 4 Installer BUGs with Installer Themes To: Torrey Hoffman <[EMAIL PROTECTED]> Copies to: Mandrake Cooker <[EMAIL PROTECTED]>, Warly <[EMAIL PROTECTED]> Send reply to: [EMAIL PROTECTED] > Torrey Hoffman <[EMAIL PROTECTED]> writes: > > > My suggestion: Get rid of installation themes, keep only the blue > > graphics. Switching themes doesn't work correctly and you have much more > > important bugs to fix. > > they are mostly kept for screenshoting aimed for manuals (where light > background is much nicer than dark one) > > in next version, I'll remove the easy ability to change themes, having the > white/gray theme only available via a special shortcut. > > > > If there are no major bugs in itPLEASE leave them in...There are people who have problems seeing some on some monitors, and the different themes helps a LOT in those cases. And then there are the people with different forms of color blindness...With current setup, they can choose a combo that they can see. For example, I have a co- worker/friend that cannot tell the difference between red and green. He CAN see colors, but cannot distinguish between red and green. The themed install can make the difference between a pleasant install and a very uncomfortable on. -BEGIN PGP PUBLIC KEY BLOCK- Version: 2.6.2 mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLO Mr T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ +iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7 hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1 16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6 T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70= =TcJB -END PGP PUBLIC KEY BLOCK-
Re: [Cooker] vmware wont compile
fixed.. needed to use the following command CC=gcc vmware-config.pl On Thu, 2002-03-07 at 08:43, Mehmet Demirtas wrote: > did you install egcs-cpp? it's necessary to build vmware modules.. > > grtz > > > On Thursday 07 March 2002 16:38, Ray Carlino wrote: > > I still can't compile this is the error I get. > > > > None of VMware Workstation's pre-built vmmon modules is suitable for > > your > > running kernel. Do you want this script to try to build the vmmon > > module for > > your system (you need to have a C compiler installed on your system)? > > [yes] > > > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > What is the location of the directory of C header files that match your > > running > > kernel? [/lib/modules/2.4.18-2mdkenterprise/build/include] > > > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > Extracting the sources of the vmmon module. > > > > Building the vmmon module. > > > > make: Entering directory `/tmp/vmware-config1/vmmon-only' > > make[1]: Entering directory `/tmp/vmware-config1/vmmon-only' > > make[2]: Entering directory > > `/tmp/vmware-config1/vmmon-only/driver-2.4.18-2mdkenterprise' > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > In file included from .././linux/driver.c:38: > > /lib/modules/2.4.18-2mdkenterprise/build/include/linux/malloc.h:4:2: > > warning: #warning linux/malloc.h is deprecated, use linux/slab.h inste > > ad. > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > In file included from .././linux/hostif.c:26: > > /lib/modules/2.4.18-2mdkenterprise/build/include/linux/malloc.h:4:2: > > warning: #warning linux/malloc.h is deprecated, use linux/slab.h inste > > ad. > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > cpp: -lang-c: linker input file unused since linking not done > > make[2]: Leaving directory > > `/tmp/vmware-config1/vmmon-only/driver-2.4.18-2mdkenterprise' > > make[2]: Entering directory > > `/tmp/vmware-config1/vmmon-only/driver-2.4.18-2mdkenterprise' > > : warning: "cpu" re-asserted > > : warning: "machine" re-asserted > > In file included from .././linux/driver.c:38: > > /lib/modules/2.4.18-2mdkenterprise/build/include/linux/malloc.h:4:2: > > warning: #warning linux/malloc.h is deprecated, use linux/sla
Re: [Cooker] amd xp tyan mb panic
fixed for now. seems to running good right now. I had to change the smp spec version from 1.4 to 1.1 Ray On Thu, 2002-03-07 at 07:29, svetljo wrote: > > Not AMD XP cpus, I have a 1600s and 1700s running fine. > > > > > >> From: Ray <[EMAIL PROTECTED]> > >> Reply-To: [EMAIL PROTECTED] > >> To: [EMAIL PROTECTED] > >> Subject: [Cooker] amd xp tyan mb panic > >> Date: 06 Mar 2002 21:25:56 -0700 > >> > >> Is there any know problems with amd xp cpus or tyan tiger mp > >> motherboards? > >> I can get thru the install ok but on reboot 8 out 10 times I get a > >> kernel panic right after the ide detection. > >> > >> > >> Ray > > > > try looking at > http://marc.theaimsgroup.com/?w=2&r=1&s=amd+mp&q=t > http://marc.theaimsgroup.com/?l=linux-kernel&w=2&r=1&s=amd+mp&q=b > > >
Re: [Cooker] vmware wont compile
terprise/build/include/linux/kernel.h:79: parse error before `va_list' /lib/modules/2.4.18-2mdkenterprise/build/include/linux/kernel.h:79: warning: function declaration i.././linux/driver.c: In function `Warning': .././linux/driver.c:1110: `va_list' undeclared (first use in this function) .././linux/driver.c:1110: (Each undeclared identifier is reported only once .././linux/driver.c:1110: for each function it appears in.) .././linux/driver.c:1110: parse error before `args' .././linux/driver.c:1115: warning: implicit declaration of function `__builtin_stdarg_start' .././linux/driver.c:1115: `args' undeclared (first use in this function) .././linux/driver.c:1117: warning: implicit declaration of function `__builtin_va_end' .././linux/driver.c: In function `Log': .././linux/driver.c:1138: `va_list' undeclared (first use in this function) .././linux/driver.c:1138: parse error before `args' .././linux/driver.c:1143: `args' undeclared (first use in this function) .././linux/driver.c: In function `Panic': .././linux/driver.c:1176: `va_list' undeclared (first use in this function) .././linux/driver.c:1176: parse error before `args' .././linux/driver.c:1178: `args' undeclared (first use in this function) make[2]: *** [driver.o] Error 1 make[2]: Leaving directory `/tmp/vmware-config1/vmmon-only/driver-2.4.18-2mdkenterprise' make[1]: *** [driver] Error 2 make[1]: Leaving directory `/tmp/vmware-config1/vmmon-only' make: *** [auto-build] Error 2 make: Leaving directory `/tmp/vmware-config1/vmmon-only' Unable to build the vmmon module. For more information on how to troubleshoot module-related problems, please have a look at "http://www.vmware.com/download/modules/modules.html";. Execution aborted. On Wed, 2002-03-06 at 14:52, Byron Poland wrote: > Yep: > > [byron@oak byron]$ rpm -qa | grep kernel > NVIDIA_kernel-1.0-2314 > kernel-headers-2.4.17-24mdk > kernel-2.4.18.4mdk-1-1mdk > kernel-2.4.18.2mdk-1-1mdk > kernel-source-2.4.18-4mdk > > > On Wed, 2002-03-06 at 16:34, Ray Carlino wrote: > > is your kernel 2.4.18 and the headers 2.4.17 / > > That si what is on the cd... > > > > I will try again > > > > > > On Wed, 2002-03-06 at 14:26, Byron Poland wrote: > > > works fine with me (cooker install about 2 days before beta4 + all the > > > latest cooker updates) Reran the vmware-config script today to change > > > some networking stuff.. ran with out a hitch. > > > > > > On Wed, 2002-03-06 at 16:08, Ray Carlino wrote: > > > > I can't compile vmware using beta 4.. > > > > header version and kernel version do not match > > > > > > > > Ray > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
[Cooker] amd xp tyan mb panic
Is there any know problems with amd xp cpus or tyan tiger mp motherboards? I can get thru the install ok but on reboot 8 out 10 times I get a kernel panic right after the ide detection. Ray
Re: [Cooker] vmware wont compile
is your kernel 2.4.18 and the headers 2.4.17 / That si what is on the cd... I will try again On Wed, 2002-03-06 at 14:26, Byron Poland wrote: > works fine with me (cooker install about 2 days before beta4 + all the > latest cooker updates) Reran the vmware-config script today to change > some networking stuff.. ran with out a hitch. > > On Wed, 2002-03-06 at 16:08, Ray Carlino wrote: > > I can't compile vmware using beta 4.. > > header version and kernel version do not match > > > > Ray > > > > > > > > > > > > > > >
[Cooker] vmware wont compile
I can't compile vmware using beta 4.. header version and kernel version do not match Ray
Re: [Cooker] Problem with rpmdrake
Date sent: Sat, 20 Oct 2001 13:04:55 -0500 From: Brian Ober <[EMAIL PROTECTED]> Subject:[Cooker] Problem with rpmdrake To: [EMAIL PROTECTED] Send reply to: [EMAIL PROTECTED] > All - > > Is anyone else having problems downloading Cooker updates using rpmdrake (on > Mandrake 8.1)?? I have tried every mirror and keep getting an error which is > below. > > If this is not the proper forum for this type of questioning, please forward > me URL where I can submit Mandrake bugs. > > Any help is greatly appreciated. > Brian > > > 12400K .. .. .. .. > 100% 0:00 122K > > 12:55:31 (89.07 KB/s) - `/var/cache/urpmi/partial/hdlist.cz' > saved [12747225] > > sh: -c: line 1: syntax error near unexpected token `'/var/cac > he/urpmi/partial/hdlist.P0X' > sh: -c: line 1: `parsehdlist '/var/cache/urpmi/partial/hdlist > .P0XA p' > unable to parse hdlist file of "P0XA pÝ > " > nothing to write in list file for "P0XA pÝ > " > nothing written in list file for "P0XA pÝ > " > unable to update medium "P0XA pÝ > " > urpmi.addmedia returns with this value: 2 > I have never looked at the console error messages before, but I have only once been able to even try to download a security or cooker update with final release either. -BEGIN PGP PUBLIC KEY BLOCK- Version: 2.6.2 mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLO Mr T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ +iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7 hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1 16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6 T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70= =TcJB -END PGP PUBLIC KEY BLOCK-
[Cooker] nfs install fails
This is using todays Sept 25 files says it can't find fsck ERROR: check_prog can't find the program fsck.ext2 and we're not using ramdisk -- Ray * lspci agpgart : Intel Corporation|440LX/EX - 82443LX/EX Host bridge [NOT_DEFINED] unknown : Intel Corporation|440LX/EX - 82443LX/EX AGP bridge [NOT_DEFINED] unknown : Intel Corporation|82371AB PIIX4 ISA [NOT_DEFINED] unknown : Intel Corporation|82371AB PIIX4 IDE [NOT_DEFINED] usb-uhci: Intel Corporation|82371AB PIIX4 USB [NOT_DEFINED] sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller [NOT_DEFINED] Card:ATI Mach64 3D RAGE II: ATI|3D Rage II+ 215GTB [Mach64 GTB] [NOT_DEFINED] 3c59x : 3Com Corporation|3c905 100BaseTX [Boomerang] [NOT_DEFINED] aic7xxx : Adaptec|AIC-7881U [NOT_DEFINED] unknown : Virtual|Hub * pci_devices 808671800 f808 0008808671810 0038808671100 0039808671110 fcf1 003a808671129 fcc1 003b808671130 0068100247550 fd00f801fedff000 007010b79050b fc41 007890048178a f401fedfe000 * fdisk Disk /dev/sda: 255 heads, 63 sectors, 553 cylinders Units = cylinders of 16065 * 512 bytes Device BootStart EndBlocks Id System /dev/sda1 * 131248976 82 Linux swap /dev/sda232 553 41929655 Extended /dev/sda532 553 4192933+ 83 Linux Disk /dev/hda: 255 heads, 63 sectors, 5473 cylinders Units = cylinders of 16065 * 512 bytes Device BootStart EndBlocks Id System /dev/hda1 1 5473 43961841 83 Linux * scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: SEAGATE Model: ST34572W Rev: 0876 Type: Direct-AccessANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: CONNER Model: CTT8000-SRev: 1.17 Type: Sequential-AccessANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 * lsmod vfat9392 1 fat31040 1 [vfat] parport_pc 7440 0 parport 6960 0 [parport_pc] sd_mod 17536 1 aic7xxx 131792 1 scsi_mod 38640 2 [sd_mod aic7xxx] ide-cd 24512 0 cdrom 30592 0 [ide-cd] serial 19040 0 usb-uhci 18480 0 (unused) usbcore43024 1 [usb-uhci] nfs43588 1 lockd 45008 0 [nfs] sunrpc 60932 1 [nfs lockd] af_packet 5932 0 (unused) 3c59x 22100 1 * cmdline ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=788 BOOT_IMAGE=vmlinuz auto
[Cooker] root desktop
Root really needs to have the option to have a full desktop.. I am an admin for about 20 Mandrale servers and when I or another admin needs to do some work on a server it would be nice to have the same deskop. Don't take away from root users let them decide if they want take the chance running as root. Linux is great because users get to make these kind of choices.
Re: [Cooker] new install - background/desktop problems
Date sent: Thu, 20 Sep 2001 14:03:21 +0200 From: Guillaume Cottenceau <[EMAIL PROTECTED]> Subject:Re: [Cooker] new install - background/desktop problems To: [EMAIL PROTECTED] Send reply to: [EMAIL PROTECTED] > Borsenkow Andrej <[EMAIL PROTECTED]> writes: > > > Where have you found these 99% of people? Obviously, of all posting in > > this thread just two people have seen it - one of them developer. So, > > speaking about *users* the score is currently 100% against it :-) > > Well, here at Mandrake we sure do tweaking of system all day long, and no > one of us is logged as root of course. > > Some of us use sudo a lot, some of us (like me) open one terminal and > become root with "su" in this terminal, and that's fine, but no one logs > into the WM as root. It's especially dangerous to do mail/web/news, cvs > stuff, and any normal operations with root, and I don't see a good reason > to do that provided you have su and sudo. > > > > -- > Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/ > Here is another vote to have an option in 'expert' to disable this behavior. I spent half a day at work trying to figure out what happened to the desktop...Removing the Desktop dir and the .kde dir and restarting to see if it would come back and run the wizard again(which I thought was the problem.) If you want to make the background a different color, fine, but do not disable important icons like the shell and kill icon! Expecialy as you have not fixed the problem with installing on Dell Optiplex GX110s yet. I still cannot get anything but 640x480x16color working on the Dell with intel video. This is with RC1. MD8 worked fine, but ALL versions of MD8.1 have not worked at all. It does not even ask to test the video anymore, just goes directly to the 'boot x on startup' question. James Ray Kenney -BEGIN PGP PUBLIC KEY BLOCK- Version: 2.6.2 mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLOMr T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ +iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7 hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1 16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6 T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70= =TcJB -END PGP PUBLIC KEY BLOCK-
Re: [Cooker] Problems with 8.1 beta 1 and beta 2 and beta 3on DellOptiplex GX110
Date sent: Sun, 16 Sep 2001 08:20:42 +0800 From: Leon Brooks <[EMAIL PROTECTED]> Subject:Re: [Cooker] Problems with 8.1 beta 1 and beta 2 and beta 3on Dell Optiplex GX110 To: [EMAIL PROTECTED] Send reply to: [EMAIL PROTECTED] Organization: Would be nice > civileme wrote: > > On Sunday 16 September 2001 00:37, James Ray Kenney wrote: > >> Did upgrade from 8.0 to 8.1 Beta 1 and X Windoes would no > >> longer work. > > >> Did fresh install fo 8.1 Beta 1 and same problem > >> Did fresh install of 8.1 Beta 2 and same problem > >> Did fresh install of 8.1 Beta 3 and same problem > > >>Said it could not open screen 0 (I think) > > > That is really odd. We have about 10 of those GX110s round here and > > the video on Beta3 works fine. It did not work on Beta 1 or 2. > > James, post any errors from /var/log/XFree86.0.log, they would help a > lot in diagnosis. > > I also have a Via mobo (VT8601/82C586/82C686/CyberBlade-i1) which locks > up (doorbell time) when I start XFree86v4 on it under Beta1. > > Cheers; > > Which XFree did you use??? 4 or 3? I Think I tried both with beta 3 but I do have SOME work to do while at work :-) , so I am not sure. James -BEGIN PGP PUBLIC KEY BLOCK- Version: 2.6.2 mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLOMr T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ +iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7 hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1 16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6 T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70= =TcJB -END PGP PUBLIC KEY BLOCK-
[Cooker] Problems with 8.1 beta 1 and beta 2 and beta 3on Dell Optiplex GX110
I am reposting this because no one ever seemed to read it the first time. Also this has been updated for Beta 3 Did upgrade from 8.0 to 8.1 Beta 1 and X Windoes would no longer work. Did fresh install fo 8.1 Beta 1 and same problem Did fresh install of 8.1 Beta 2 and same problem Did fresh install of 8.1 Beta 3 and same problem Said it could not open screen 0 (I think) Dell has Intel810 video (yuck, but what choice do I have at work!) Install program is in 16 colors(or maybe 256), and looks terrible. I can not find FB device in list for display devices. I tried 4 with 3d and 4 without 3d, and have not had time to check 3 yet because I will have to reinstall to test it. When I went back to start of x windows install the screen became corrupted and was impossible to read almost anything. After install the ONLY mode that worked at all was VGA and that gave me only 640x480(though it may have been 320x200, it has been too long since I used res. like that for me to tell :-) ) That was in Beta 1.In Beta 2 even VGA mode did not work. I am using GRUB for boot manager because in 8.0 it was the only one that would work with Dell OptiPlex GX110. Could anyone help? At work we are buying NOTHING but GX110s and I would hate to see us not be able to Dual Boot into Linux anymore. James -BEGIN PGP PUBLIC KEY BLOCK- Version: 2.6.2 mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLOMr T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ +iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7 hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1 16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6 T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70= =TcJB -END PGP PUBLIC KEY BLOCK-
[Cooker] Problems with 8.1 beta 1 and beta 2 on Dell Optiplex GX110
Did upgrade from 8.0 to 8.1 Beta 1 and X Windoes would no longer work. Did fresh install fo 8.1 Beta 1 and same problem Did fresh install of 8.1 Beta 2 and same problem Said it could not open screen 0 (I think) Dell has Intel810 video (yuck, but what choice do I have at work!) Install program is in 16 colors(or maybe 256), and looks terrible. I can not find FB device in list for display devices. I tried 4 with 3d and 4 without 3d, and have not had time to check 3 yet because I will have to reinstall to test it. When I went back to start of x windows install the screen became corrupted and was impossible to read almost anything. After install the ONLY mode that worked at all was VGA and that gave me only 640x480(though it may have been 320x200, it has been too long since I used res. like that for me to tell :-) ) That was in Beta 1.In Beta 2 even VGA mode did not work. I am using GRUB for boot manager because in 8.0 it was the only one that would work with Dell OptiPlex GX110. Could anyone help? At work we are buying NOTHING but GX110s and I would hate to see us not be able to Dual Boot into Linux anymore. James -BEGIN PGP PUBLIC KEY BLOCK- Version: 2.6.2 mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLOMr T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ +iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7 hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1 16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6 T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70= =TcJB -END PGP PUBLIC KEY BLOCK-
[Cooker] vmware
vmware is broken again Beta 2 install and vmware 1142 workstation. I used the 2.4.7 module patches from platan and it compiles but fails to start the Virtual ethernet. Then if you try to run vmware it core dumps -- Ray
Re: [Cooker] MDK Freq 3
Don't be to excited aboutfixing anything... I have tried to install it on 2 different machines both failed. One because it can't load the aic7xxx module during install and the other just couldn't install packages as an update. On Tuesday 14 August 2001 06:48, you wrote: > Ok finally a new Freq, but why didn't anyone know when it would be released > last week. > How does the organisation work for these things? it seems that there is a > hierachy where the programmers not always know what the management does. It > that so? > > Maybe information about the Freq versions could be more frequently :o) I'm > just saying that maybe it would be possible to track Freq online with bugs > reports, new features added to next freq and approx datelines for next > freq. This could be used for beta/rcs also. > > Anyway I'm downloading the freq3 as we speak and look forward to get the > bugs fixn my system that was induced by freq2. > > Kind regards, > > Mads -- Ray
[Cooker] Stable
I am thinking about doing a new install of the latest cooker but have seen some big issues with /dev and things. Just wanted to know if it is installable and usable. I am still using last weeks build. -- Ray
Re: [Cooker] PR Machine
I am beta testing XP and believe me it is not a great product!!! The release date is OCT. 25th and there is no reason to try and compete with this release because Microsoft has already said they will spend $1 billion on this release. On Tuesday 07 August 2001 16:17, you wrote: > Cooker, > > I don't know if you've been paying attention or not > but in the United Stated major computer manufactures > are starting to ship computers with Office XP. The > schedule for Windows XP is to release at the end of > August. > > Since Mandrake one of the best alternatives to MS > products we need to get something out the door to > trump Microsoft's release. > > Imagine the press Mandrake could get if your PR people > could promote Mandrake 8.1 as the only viable > alternative to XP. This is the chance Mandrakesoft > needs to go mainstream. Get a few press people (LA > Times, NY Times) out to interview key players at > Mandrake and ride Microsoft's Hype Machine as one of > XP's only alternatives. > > Unfortunately advertising is something Linux has > lacked. Since Mandrake is public you should seriously > consider a PR firm that can handle the challenge. As > well a not drop Mandrake when Microsoft dangles a few > dollars their way. > > Shad > > = > [EMAIL PROTECTED] > > __ > Do You Yahoo!? > Make international calls for as low as $.04/minute with Yahoo! Messenger > http://phonecard.yahoo.com/ -- Ray
Re: [Cooker] Printing died
Well since you got no response I put in a bug report to get that fixed. I know if I buy an ooperating system I think it should print. Maybe we will get more help during the coming week. On Sunday 29 July 2001 01:18 pm, you wrote: > On Sunday 29 July 2001 19:52, you wrote: > > I had that same error during the install and just cancelled the printer > > setup. > > Yes, similar for me, I tried to restart the shit from Mandrake Control > Center and the installation program did not let me print to the > description, keyboard had no access. > > I have had this problem for at least 14 days, and have reported about it > but they can't repeat the bug, and then it does not exist. > > regards > guran -- Ray
Re: [Cooker] Printing died
I had that same error during the install and just cancelled the printer setup. And then after install still won't work. I even uninstalled cups and installed the last version from the mandrake freq and still no help.. > On Sunday 29 July 2001 14:50, you wrote: > > I just did a fresh install of the July 28 version of cooker. > > Now I can't print. > > Hi > I can't get in contact with my cups driver during installation. It is > looking for a 2.4.5 kernel modules. > > Version: > /ChangeLog/1.523/Thu Jul 19 17:03:46 2001// > Mandrake Linux Cooker-i586 20010728 10:47 > > Here is from my ddebug.log > * opened rpm database for transaction of 3 new packages, still 0 after that > to do > * rpmRunTransactions start > > * getFile cups-common-1.1.9-5mdk.i586.rpm:Installation CD > > * advertising /mnt/tmp/drakx-images/1-thanks.png > > * getFile cups-1.1.9-5mdk.i586.rpm:Installation CD > > * getFile cups-drivers-1.0-31mdk.i586.rpm:Installation CD > > * rpmRunTransactions done, now trying to close still opened fd > > * getFile XXX: > > * rpm database closed > > * running: ldconfig with root /mnt > > * Install took: 0:00:06 > > * Installed: 1.9GB(df), 1.6GB(rpm) > > * running: ifup lo with root /mnt > > Cannot open netlink socket: Address family not supported by protocol > > modprobe: Can't open dependencies file /lib/modules/2.4.5-BOOT1/modules.dep > (No such file or directory) > Device does not seem to be present, delaying lo initialization. > > * running: /etc/rc.d/init.d/cups start with root /mnt > > Starting CUPS printing system: [ OK ] > > * warning: unable to connect to cups server at > /usr/bin/perl-install/printer.pm line 417. > > * starting step `summary > > regards > guran -- Ray
Re: [Cooker] Printing died
It seems that parport_probe module is not there and I can't find it. Does 2.4x kernel still use it? On Sunday 29 July 2001 06:50 am, you wrote: > I just did a fresh install of the July 28 version of cooker. > Now I can't print. When I setup my printer and do a print my log files gets > this. Any help of cupsomatic seems to be failing > > I [29/Jul/2001:06:44:05 -0700] Started filter /usr/lib/cups/filter/pstops > (PID 2517) for job 20. > I [29/Jul/2001:06:44:05 -0700] Started filter > /usr/lib/cups/filter/cupsomatic (PID 2518) for job 20. > I [29/Jul/2001:06:44:05 -0700] Started backend > /usr/lib/cups/backend/parallel (PID 2519) for job 20. > E [29/Jul/2001:06:44:06 -0700] PID 2518 stopped with status 32! -- Ray
[Cooker] Printing died
I just did a fresh install of the July 28 version of cooker. Now I can't print. When I setup my printer and do a print my log files gets this. Any help of cupsomatic seems to be failing I [29/Jul/2001:06:44:05 -0700] Started filter /usr/lib/cups/filter/pstops (PID 2517) for job 20. I [29/Jul/2001:06:44:05 -0700] Started filter /usr/lib/cups/filter/cupsomatic (PID 2518) for job 20. I [29/Jul/2001:06:44:05 -0700] Started backend /usr/lib/cups/backend/parallel (PID 2519) for job 20. E [29/Jul/2001:06:44:06 -0700] PID 2518 stopped with status 32! -- Ray
Re: [Cooker] Dell Perc 3 raid controller
I tried running the bug command with both 8.0 release and the freq 6-19-2001 version and this is what I got running /usr/bin/insmod_2 /dev/tty5 -f /tmp/floppy.o mounting /dev/sda on /fd0 as type ext2 mount failed: no such file or directory /fs.pm line 220 On Wednesday 18 July 2001 02:07, Pixel wrote: > Ray <[EMAIL PROTECTED]> writes: > > The first part of the install it does install the megaraid module I tried > > to watch as the modules loaded and I get an error > > "file not found in archive megaraid.o" > > then during the hard drive detection it does not appear to see the raid > > controller because it scans all of the scsi ids and reports finding the 3 > > drives seperate but aborts because of bad partition table. then it just > > keeps aborting on all of the ids then finally just locks up. While using > > a 7.2 install all is fine it loads the megaraid module then during the > > harddrive detection it sees the raid controller and reports back one > > large drive size. BTW I did install Redhat 7.0 and 7.1 on this Dell > > serevr and it > > installed ok.. > > It appears that it is loading the qla1280 driver and that might be whats > > getting in the way. the qla1280 does not load on the 7.2 install. > > I even loaded the megaraid modules manually before the hard drive > > detection but it still can't see the raid drives. > > can you mail me the report.bug? > to get it: > > during install, switch to console 2, > put a fat floppy in floppy drive, > and type "bug" > > -> it will put report.bug on floppy and this file interests me :) > > > thanks, cu Pixel. -- Ray
Re: [Cooker] Dell Perc 3 raid controller
The first part of the install it does install the megaraid module I tried to watch as the modules loaded and I get an error "file not found in archive megaraid.o" then during the hard drive detection it does not appear to see the raid controller because it scans all of the scsi ids and reports finding the 3 drives seperate but aborts because of bad partition table. then it just keeps aborting on all of the ids then finally just locks up. While using a 7.2 install all is fine it loads the megaraid module then during the harddrive detection it sees the raid controller and reports back one large drive size. BTW I did install Redhat 7.0 and 7.1 on this Dell serevr and it installed ok.. It appears that it is loading the qla1280 driver and that might be whats getting in the way. the qla1280 does not load on the 7.2 install. I even loaded the megaraid modules manually before the hard drive detection but it still can't see the raid drives. On Tuesday 17 July 2001 14:41, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > I can't install 8.0 or mandrakefreq 6-19-01 on a Dell server that uses > > the perc 3 raid controller. I have reported this in the 8.0 beta but > > still does not seem to work. It just dies during the hardware detection. > > more info needed... > > what exactly do you mean with ``dies'' ?
[Cooker] Samba
I can't get Samba to work with the 7-16-01 build. The client works but when I try to connect from another machine I get an error the only thing in the log is as follows. I did use my orginal conf files from a previous version. tail log.nmbd [2001/07/17 12:21:52, 0] nmbd/nmbd.c:sig_term(65) Got SIGTERM: going down... [2001/07/17 12:22:46, 0] nmbd/nmbd.c:sig_term(65) Got SIGTERM: going down... [2001/07/17 12:32:56, 0] nmbd/nmbd.c:sig_term(65) Got SIGTERM: going down... [2001/07/17 12:35:15, 0] nmbd/nmbd.c:sig_term(65) Got SIGTERM: going down... [2001/07/17 12:58:06, 0] nmbd/nmbd.c:sig_term(65) Got SIGTERM: going down... -- Ray
Re: [Cooker] vmware kernel source
You were right that did the trick.. Thanks On Tuesday 17 July 2001 09:35, you wrote: > The following lines seem to be missing from > /usr/src/linux/include/linux/version.h: > > #if defined(__module__smp) > #define UTS_RELEASE "2.4.6-4mdksmp" > #elif defined(__module__enterprise) > #define UTS_RELEASE "2.4.6-4mdkenterprise" > #else > #define UTS_RELEASE "2.4.6-4mdk" > #endif > > Not sure why they weren't there but adding them did the trick for me. > > -tem > > On Tue, 17 Jul 2001, Ray wrote: > > I just did a clean install yesterday and now vmware wont compile the > > modules. > > > > > > What is the location of the directory of C header files that match your > > running kernel? [/usr/src/linux/include] > > > > The directory of kernel headers (version @@VMWARE@@ UTS_RELEASE) does not > > match your running kernel (version 2.4.6-4mdk). Consequently, even if the > > compilation of the module was successful, the module would not load into > > the running kernel. -- Ray
[Cooker] vmware kernel source
I just did a clean install yesterday and now vmware wont compile the modules. What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include] The directory of kernel headers (version @@VMWARE@@ UTS_RELEASE) does not match your running kernel (version 2.4.6-4mdk). Consequently, even if the compilation of the module was successful, the module would not load into the running kernel. -- Ray
[Cooker] 7.2 freq update iso
Anyone know where I can get this? I seem to have lost my copy and I need to install a new server with 7.2 and this was a great update. I can't find it on the few ftp sites that I have seen. Thanks -- Ray
[Cooker] Mandrake?????
I have not seen a response to any of the messages from a Mandrake rep. Are they not around any more? I put in a question about a Dell perc raid controller and no response. Is this the right place to get problems reported and a response or not. Ray
[Cooker] Dell Perc 3 raid controller
I can't install 8.0 or mandrakefreq 6-19-01 on a Dell server that uses the perc 3 raid controller. I have reported this in the 8.0 beta but still does not seem to work. It just dies during the hardware detection. -- Ray
[Cooker] Jserv
Jserv needs jdk and I installed it to /usr/local but jserv still needs it. where does jdk need to live for jserv to find it?? -- Ray
[Cooker] Enterprise kernel
Just a note that you must use Xfree 4.0x and not 3.x with this kernel and 2gb of ram. Always get a can't read /dev/mem failure error -- Ray
[Cooker] Dell PERC raid controller
Any luck finding a card? I was just wondering if it was worth trying to install yet? -- Ray
[Cooker] apache-asp
I just installed the latest cooker beta and still get this error when trying to click on the xml test page Proxy Error The proxy server received an invalid response from an upstream server. The proxy server could not handle the request GET /perl/Apache-ASP/site/eg/xslt.xml. Reason: Document contains no data Apache-AdvancedExtranetServer/1.3.19 Server at yule.cr.usgs.gov Port 80 -- Ray
[Cooker] kernel 2.4.3-16mdk
Still unable to compile and use high mem kernel -- Ray
[Cooker] Large memory support
I can not compile a 2.4.3 kernel to support high memory. I have tried all different configurations but the modules will never load on boot. 2.4.2 is ok I compiled from beta 3 again today and it is ok if I don't load the mdk config file first. Can someone please compile a high mem kernel and maybe put it in unsupported or contrib. -- Ray
Re: [Cooker] Dell Perc raid
update. I can do a install if I use the network.img-2.2.17-BOOT8 to do the install it installs to the raid drive just fine and boots to the 2.4.3 kernel ok. hope that helps. I do get a gl1280 module that can't load during the install but it all seems to work. On Friday 06 April 2001 14:25, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > I am unable to install to a perc raid device. > > It just hangs on the harddrive detection. Any ideas? > > Régis we have such beast in our test labs ? -- Ray
Re: [Cooker] Menu's Missing
Fresh install gives same results... On Tuesday 10 April 2001 18:11, you wrote: > Just ran thru the updates and now I have no menu's for kde. > I don't know if it was the menu update or the kde update that broke it. -- Ray
[Cooker] kernel 2.4
Where are the kernel rpms??? I can't find them on any of the mirrors. all the cookers have 2.2 only -- Ray
Re: [Cooker] unable to mount root fs
Yes the root=/dev/sda5 lilo.conf did not change. I just made new links to tyhe new kernel and modules.. I don't know what other info I give, I did the same thing with beta 3 with no problem. On Monday 09 April 2001 20:34, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > using rc-1 kernel -10 > > I recompile to add 4gb memory support but I always get this error after > > reboot unable to mount root fs on 08:05 > > Are you sure you're not forgetting the root= parameter? > > I think 08:05 is default value which equals /dev/sda5. -- Ray
Re: [Cooker] unable to mount root fs
No raid on this one. 1Drive scsi 18GB 160 the default kernel boots ok but nothing that I compile. On Monday 09 April 2001 21:34, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > using rc-1 kernel -10 > > I recompile to add 4gb memory support but I always get this error after > > reboot unable to mount root fs on 08:05 > > > > I was able to do this same thing all last week with no problems beta 3 > > and daily cookers. > > raid ? -- Ray
[Cooker] unable to mount root fs
using rc-1 kernel -10 I recompile to add 4gb memory support but I always get this error after reboot unable to mount root fs on 08:05 I was able to do this same thing all last week with no problems beta 3 and daily cookers. -- Ray
[Cooker] Dell PERC Raid card ????????
Any luck on the PERC raid card yet? Dell is the number one hardware vendor for Linux so hopefully it will be supported. It worked fine on the LM 7.2 -- Ray
Re: [Cooker] Dell Perc raid
This is a perc 3/dcl bios 3.08 I get the following error during cdrom boot. Q Logic| QLA12160 Installation of driver failed AMI|MegaRaid Installation of driver failed Then it comes up to the gui and asks for country and install type. Then just hangs on the hard drive detection On Friday 06 April 2001 14:25, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > I am unable to install to a perc raid device. > > It just hangs on the harddrive detection. Any ideas? > > Régis we have such beast in our test labs ? -- Ray
[Cooker] Dell Perc raid
I am unable to install to a perc raid device. It just hangs on the harddrive detection. Any ideas? -- Ray
[Cooker] release date
Anyone have an approximate release date for LM 8.0? Is it weeks or months? -- Ray
[Cooker] Feature Idea
Again lets go back to not being only a workstation distribution. We really need a high memory server kernel prebuilt with an option to install in the server options. I don't want to go back to comparing Redhat but I did an install of the latest beta and they have that option which is real nice. I know you will say just build your own.. Not a problem but when I do have problems like now I can't get isofs to load and all I changed was the high mem option then a lot of time is wasted that could be prebuilt in... -- Ray
[Cooker] Telnet
I have done sereral install of 8.0 beta and have yet to find a place to install telnet client and server during the install. Sure I can add it later but telnet is one of the main stream programs for *nix. Also the groups are nice but there should be an everything button and then let me deselect items. Some people (developers) need to have just about everything install and don't want to go back and install packages each time they do something new. -- Ray
[Cooker] Kernel compile no isofs
Everytime I recompile the kernel to include high memory 4GB and set it to 686 processor I can't use the cdrom anymore. I get the following error in the messages log and /mnt/cdrom: Input/output error when doing a ls. kernel 2.4.3-5 and -4 same results. insmod: /lib/modules/2.4.3-5mdk/kernel/fs/isofs/isofs.o: insmod iso9660 failed -- Ray
Re: [Cooker] Apache Webserver....
You need to remove apache-SSL it is broken. look in your log files they will be huge... On Thursday 05 April 2001 04:30, you wrote: > In beta 2 it worked fine (both httpd and httpd-perl)...Now with the beta > 3, i get nothing from my port 80...only the httpd-perl server seems to be > working (port 8080)...I just used the default install and have not > modified the config files at all...Help, this is driving me $*#*# nuts.... -- Ray
Re: [Cooker] fonts
The fonts are NOT fixed I just did a new install and advanced editor is not usable... Or if you view a text file inside of Konqueror.. This is a must fix before release.I have a whole office that wants to start moving to Linux but they saw the fonts and said no way. On Thursday 05 April 2001 00:44, you wrote: > Ahh. I reviewed my version and it is Beta 2. I'll try 3 soon. Bravo, > Mandrake! > Ravenhall > > >Yes, the fonts are all fixed (Traktopel Beta 3) > > > >-Original Message- > > From: [EMAIL PROTECTED] > > >[mailto:[EMAIL PROTECTED]]On Behalf Of Ray > >Sent: Tuesday, April 03, 2001 3:20 PM > >To: [EMAIL PROTECTED] > >Subject: [Cooker] fonts > > > > > >Are the fonts fixed in the latest beta 3 ??? > >Kde fonts were real bad in advanced editor and viewing files in Konqueror. > >I just want to know before I try another install. I use the editor alot. > > > >-- > >Ray > > _____ > Get your FREE download of MSN Explorer at http://explorer.msn.com -- Ray
[Cooker] 2GB ram
How can I get beta 3 to see 2GB ram? I tried the append but it only shows 900MB. Do I need to recompile the kernel and where do I find the setting? Thanks -- Ray
[Cooker] fonts
Are the fonts fixed in the latest beta 3 ??? Kde fonts were real bad in advanced editor and viewing files in Konqueror. I just want to know before I try another install. I use the editor alot. -- Ray
[Cooker] Application request
There is a growing need for XML server support thru Apache. XML is growing fast but can only be viewed in IE5x. There are some XML parsers that work with Apache but are hard to setup. Maybe someone could make a rpm. Here are a few examples.Apache::ASP, Apache Cocoon Axkit (but they just got bought so the future of open source is in question.) I have tried the Apache::ASP that comes bundled with Mandrake but it does not seem to work.. Thanks -- Ray
[Cooker] mod_perl
Is anyone working on the mod_perl package? It has not been working for awhile. there are a lot of modules that won't work in apache right now. -- Ray
Re: [Cooker] mod_perl
I don't have any idea how this new config system works. So any help please. I need to evaluate apache::asp and I want to use Mandrake for the server that I just bought. Does it work on Beta 2 ISO? On Thursday 29 March 2001 19:14, you wrote: > Both httpd and httpd-perl are trying to start on port 80 the proxie is not > working -- Ray
[Cooker] mod_perl
Both httpd and httpd-perl are trying to start on port 80 the proxie is not working -- Ray
Re: [Cooker] new apache + mod_php
It also appears that mod_perl is not running either I don't get the resuming operation in the error log. On Thursday 29 March 2001 22:21, you wrote: > Goetz Waschk wrote: > > mod_php doesn't work anymore after an update to apache 1.3.19-1mdk, but a > > simple rebuild of the php package should fix that. > > I encountered that problem, apache didn't work anymore even on plain > html with the current (4.0.4pl1-3) php binaries installed. Recompiling > the php SRPM fixed the problem. > > I also noticed that the following "BuildRequires" dependencies are > missing in php.spec: > db2-devel > ncurses-devel > > It would be great if someone could add these dependencies and regenerate > the php RPMs. thx. -- Ray
[Cooker] apxs
I am trying to compile a mod_xslt module but it is looking for apxs in the apache directory. I did a find and can't find it. There is a man page for it...Where can I get it.. This is on both 7.2 and 8.0 -- Ray
[Cooker] XML again
Does anybody know if Mandrake has an xml parser like Axkit? Or know of one that will work? I am having lots of problems with compiling Axkit -- Ray
[Cooker] XML
I am trying to get a Apache xml parser setup. Is there anything in Cooker yet I was looking at AxKit maybe but if there is another server side xml parser already here let me know. Or if you have any suggestions on a good xml parser to allow all browsers to view xml. -- Ray
Re: [Cooker] Re: 4GB physical ram: need swap space?
So if I do have over 1GB Ram does Mandrake have himem kernel or do I need to compile? I am getting two 2Gb servers next week and want to use Mandrake 8.0 Ray
[Cooker] 2 gig file size
Is the 2 gig file size limit gone in the new 8.0 beta?? -- Ray
Re: [Cooker] Why no KDE 2.1 packages for 7.2?
What is the best way to upgrade 7.2 to KDE 2.1? which oreder to install the packages? On Saturday 03 March 2001 14:34, you wrote: > Ron Stodden <[EMAIL PROTECTED]> writes: > > Alan Shoemaker wrote: > > > The KDE packages for Linux-Mandrake 7.2 are still under > > > preparation > > > and testing. They should be available by Wednesday 07-March. > > > Sorry for the delay - we do want them well-working and > > > well-tested :) > > > > KDE 2.1 final binary RPMs for Mandrake 7.2 are now in the > > mandrake-devel/unsupported/KDE-2.1 directory on the mirrors. > > > > I wish I knew who to give credit to for this work ... > > > > I am glad they are in a subdirectory of their own; it makes updating > > so easy. > > You can thanks the MandrakeSoft KDE team (daouda, david faure, laurent > montel) and give a special standing ovation to Dadou for his hard > work on the 7.2 rebuild. -- Ray
[Cooker] Mips support
I know this may be the wrong place but alot of knowlege is on this board. I am getting a SGI Challenge L server with r4400 processors and was wondering if anyone knows of a linux version/distro that will work? Thanks -- Ray
Re: [Cooker] NEW Mirror SITE of ISO MDK Cooker
Did you use reiserfs by chance? I had that happen when I used the reiserfs but then I reinstalled with ext2 and all is ok.. On Thursday 15 February 2001 23:26, you wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Anyone try installing from this ISO yet? Only tried once but I get a > kernel panic on trying to mount /dev/hdb5 which is the root > partition. I did format it during the install... I'll try it again to > get the exact error but it has something to do with a SCSI module and > I have no SCSI devices... If no one else had this error I'll just run > through the install again... Just curious. > > - -Tim > > > On Thursday 15 February 2001 11:09 am, you wrote: > > > Fabrizio Scaglione <[EMAIL PROTECTED]> writes: > > > > look at www.edisons.it/saltino/ > > > > > > > > THX at all > > > > > > > > mkcd.pl Who can use this I'm not !!! > > > > > > what s your pb ? > > -BEGIN PGP SIGNATURE- > Version: PGP 7.0.1 > > iQA/AwUBOoxlpJcaE5Cuy9BdEQKVBQCfd9ouNFXYgPq9lLHS9V7Rp3/dGMQAoOCP > GQZm31o1wTNklk7FX33EOB7X > =xban > -END PGP SIGNATURE- -- Ray
Re: [Cooker] 2.4 kernel
Ok I went ahead and did nodep on the 2.4.1-8 kernel it installed and boots ok.. I have some problems now. I am trying to configure my vmware with the new kernel but the header files are for uniprocessor and I am running the smp kernel. How do I get the smp headers??? Ray
Re: [Cooker] 2.4 kernel
Kernel conflicts with kdeaddutils-2.0-3mdk Package kernel-2.4.1-8mdk.i586.rpm I get the same error when trying to install the smp 2.4.1 kernel On Saturday 10 February 2001 23:12, you wrote: > > I tried that but dep errors that it conflicts with kdeutils others > > Hmmm... are you sure it's the kernel package that's conflicting with > kdeutils? > > On my box the latest kdelibs conflict with kdeutils, the kernel package > installed without any complaints... > > Stefan -- Ray
Re: [Cooker] 2.4 kernel
I tried that but dep errors that it conflicts with kdeutils others On Saturday 10 February 2001 21:17, you wrote: > On Saturday 10 February 2001 06:30 am, Ray wrote: > > Is Mandrake going to release a 2.4 kernel for LM 7.2? > > The package says 2.4 kernel ready and includes the beta version. But > > why not release a real 2.4 kernel. Not everyone wants to build their > > own or upgrade to the next version. > > 7.2 shipped with a 2.4 kernel (?) Anyhow, 2.4 kernels have been > available on any cooker mirror for months, latest is 2.4.1-8mdk > The ready made works fine with 7.2, but doesn't support 2.2 style > ipchains. So if you want to keep ipchains support you need to d/l the > Mdk kernel source and header rpms and enable '2.2 style ipchains' > during config. Also, supermount.o is in a different directory than it > was with 2.2.x kernels, so you'll need to edit /etc/rc.d/init.d/ > mandrake_everytime before you boot a 2.4.x kernel, to the new > location of supermount.o ReiserFS support is no problem. -- Ray
[Cooker] 2.4 kernel
Is Mandrake going to release a 2.4 kernel for LM 7.2? The package says 2.4 kernel ready and includes the beta version. But why not release a real 2.4 kernel. Not everyone wants to build their own or upgrade to the next version. Thanks -- Ray
Fw: [Cooker] Remove from List
- Original Message - From: Ray Streeton To: [EMAIL PROTECTED] Sent: Monday, January 08, 2001 5:50 PM Subject: [Cooker] Remove from List G'day. Please would you remove me from the Cooker e-mail list. Many thanks Ray
[Cooker] Remove from List
G'day. Please would you remove me from the Cooker e-mail list. Many thanks Ray
Re: [Cooker] helix
> (1) Save a copy of /etc/X11/wmsession.d/02gnome > (2) Save a copy of /usr/bin/startgnome Could you send me a copy of your 02gnome and startgnome files? I found out too late :-( > (3) Run Helix installer > (4) When Helix installer finishes, it'll restart your X Server. Gnome will > not be an option, so login to KDE. > (5) Copy the 02gnome and startgnome files back to their original > directories (6) Rename .gnome, .gnome-desktop, .gnome-private, and .mc > directories in your /root directory and all user directories. (e.g. I > renamed mine to ..gnome2, .gnome-desktop2, etc.). The directories will be > recreated when you login to Gnome. > (7) Reboot > (8) You should now be able to login to Gnome w/o (many) problems.
Re: [Cooker] helix
On Monday 11 December 2000 23:40, Armisis Aieoln wrote: > Tried, but it killed my gnome all together > > dave > If it just does not show in menu at bootup. you must do this after logging in to any other window or desktop manager: chmod +x /etc/X11/gdm/Sessions/Gnome that got me going... P.S. you would not believe how long it took me to find this out! P.S. #2 All of the Gnome programs will disappear from your KDE menus after this but they WILL be in your GNOME menus! > On Tuesday 12 December 2000 03:36, you wrote: > > Anyone has tried to install helix... With success?
[Cooker] Minor Annoyances w/ Gnome Install
I don't know if this has been corrected or not in Cooker, but I thought I'd mention it, just in case. Many of the problems I've encountered (such as the problems with update-menus and the UN-alphabetized arrangement of the Gnome menus) existed in LM 7.1 as well, so I hope to see this corrected before the next release. Immediately after installation, the Gnome desktop and menus are in complete chaos as compared to neat, orderly setup in KDE. It gives the general impression that great effort was made to make KDE look as nice as possible, but that Gnome is treated as an afterthought. While I understand that KDE is the default desktop for LM, I would like to see equal attention paid to make Gnome look nice as well. What I mean by this is, as soon as I boot up for the first time after a clean install and select Gnome, the desktop I'm presented with has icons scattered randomly around the desktop. In addition, I have the gnome "piston" icons for my printer -- is there no printer icons that you can find to use with Gnome? Also, the menu items in the Gnome menu are completely scattered at random. While KDE's menus are neatly alphabetized, the Gnome menu is not. MenuDrake, at least in its current incarnation, seems to be completely broken. Any item I try to add to my menus via MenuDrake never gets added -- this goes for ALL window manager menus, not just Gnome's. I have not been able to add items to the KDE menus either.. The only time an item gets added to my menus is when I add an RPM and update-menus runs automatically. Even then, though, some items, such as RealPlayer, never get added. The only way I've found to add an item to my Gnome menus was to install the Helix update and use gmenu. This too causes problems, however, because update-menus will then remove any items I add to my menus (it will also remove any menu icons I choose too). I eventually ended up having to rename update-menus so that it couldn't execute. To sum up, I'd like to be able to use MenuDrake not only to add items to my Gnome menus, but also to arrange my menu items in the order I choose. It's much easier to find the item I'm looking for if my menus are alphabetized. Thanks, Ray Swaim
[Cooker] nfs mount problems
I have a solaris 2.6 box that con no longer connect to my Mandrake 7.2 nfs shares. I keep getting stale nfs file handler. and if I check the message log on the mandrake box it says getfh failed -- Ray
[Cooker] install time
a full expert install on a dual processor machine takes 2.5 hours the same install on a single processor is 30-40 mins. I finally finished with mt tests of installing 7.2 on both single and dual processor machines. I wanted to test the install on several machines and brands to confirm the results. I used 3 different dual processor 500 mhz machines with 256-384MB ram and 3 single processor 450 Mhz machines with 64-292MB ram All Pentium III chips -- Ray
[Cooker] ext3
Is ext3 avalible during install on cooker and 7.2 or do you have to use ext2 then add ext3? Also what is involved with converting ext2 to ext3 partitions? -- Ray
[Cooker] powertools
Has anyone seen the powertools anywhere yet? I have been looking around and elinux.com had it but sold 345 copies to one business. -- Ray
Re: [Cooker] 7.2 cannot do nfs mounts
When you log in just select gnome from the drop down menu > > Now, if I can just get a response on how to switch to > GNOME instead of KDE2, I'll be golden! (There is no more > 'switchdesk' utility, but hopefully, there's something > similar in 7.2? Anyone?) > > Thanks, > GenEric > > pgeorges wrote: > > generic a écrit : > > > Oddly enough, I have absolutely no problems at all mounting a partition > > > exported from a Solaris 2.7 box at work. > > > > > > I would have expected problems with the latter instead of > > > the former. There are absolutely no log messages generated in > > > /var/log/messages (on either box) so it's a bit difficult to diagnose! > > > > > > OK Mandrake NFS gurus, what's the deal? Will a Mandrake 7.2 box > > > even be able to mount partitions exported from another Mandrake 7.2 > > > box? I'm a bit apprehensive about upgrading my 7.0 box at work > > > to 7.2 if I can't mount partions exported from it to another 7.2 > > > box!! > > > > Yes. I just mounted by nfs a directory from one LM 7.2 to another 7.2 > > > > Sorry if this is obvious, but did you check perms of directories you > > mount ? -- Ray
Re: [Cooker] 7.2 cannot do nfs mounts
I am running 7.2 and just mounted a mandrake 7 nfs to the 7.2 box On Monday 30 October 2000 21:11, you wrote: > After installing 2 Mandrake 7.2 (custom, development) installations I > am amazed to discover that > nfs mounts do not work (RPC: timed out) between them or to Mandrake > 7.1 partitions. > > portmap, nfs, mountd daemons are running. nfs_utils and nfs-utils- > clients are installed. > > This is quite serious. What to do? -- Ray
[Cooker] powerpack
Hey any word on when the free powerpack will be out? And we it be downloadable -- Ray
Re: [Cooker] install from hd doesn't work
When you do a hd install don't choose a mount point for the drive that the image is on.. After install then move the mount to where you want.. The image should be about 1.3GB you must have missed a bunch of rpms On Sat, 21 Oct 2000, you wrote: > Hi, > > This morning I downloaded the latest version of cooker from one of the > mirrors. > I created a bootdisk (hd.img) and ran the install. But after selecting > the partitions, I got an error. The setup is trying to mount the > partition containing the cooker-dir. But this partition is already > mounted! > > Another question I have is about the size. The mirror is around 450 MB. > The beta 7.2 of Linux Mandrake was 2 CD's. What files are missing and > where can I find them? > > Thanks, > > Manuel
Re: [Cooker] Sound problems with sb on rc
I am using the same card.. The trick seems to be run sndconfig from a console outside of kde.. ctrl-alt-F3 and then run sndconfig and all works.. I have done this on every beta and it works most everytime.. On Mon, 16 Oct 2000, you wrote: > OK I am totalally fustrated. can't get my SB16 to work on rc1. Works in > 7.1. > > The card is a SB16 PNP. > > When I go into harddrake and run configuration, I get the sound playing > that sound has been configured after I hit OK. After the playing I get a > box popup saying > > init_module: Device or resouce busy > /lib/modules/2.2.17-21.mdk/misc/sb.o:insmod > /lib/modules/2.2.17-21.mdk/misc/sb.o failed > /lib/modules/2.2.17-21.mdk/misc/sb.o:insmod sb failed > > > Ehat can I do to get this sound working? > > Thanks > Bob -- Ray
Re: [Cooker] Diskdrake unable to detect IDE drive partitions
I forgot to thank you. On Sun, 15 Oct 2000, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > Here you go.. /dev/hdd is the problem drive.. > > Also console 3 shows: found empty partition table on /dev/hdd at sector 0 > > Bad magic number /usr/bin/perl-install/partition_table_empty.pm line 31 > > solution: hexedit /dev/hdd and put FF at the beginning. > (or any little random at the beginning you can think ok :)
Re: [Cooker] Diskdrake unable to detect IDE drive partitions
Well that did it.. Can you fix that for users during install? On Sun, 15 Oct 2000, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > Here you go.. /dev/hdd is the problem drive.. > > Also console 3 shows: found empty partition table on /dev/hdd at sector 0 > > Bad magic number /usr/bin/perl-install/partition_table_empty.pm line 31 > > solution: hexedit /dev/hdd and put FF at the beginning. > (or any little random at the beginning you can think ok :)
Re: [Cooker] Diskdrake unable to detect IDE drive partitions
Here you go.. /dev/hdd is the problem drive.. Also console 3 shows: found empty partition table on /dev/hdd at sector 0 Bad magic number /usr/bin/perl-install/partition_table_empty.pm line 31 On Sat, 14 Oct 2000, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > The problem is drakx.. Fdisk reads the drive fine and the OS sees it > > fine after install. I can mount it without any problem but drakx still > > can't see > > wait, i think i've found. Do you have the 256 first bytes of your drive > blank? > > i made an error for the detection of empty partition having 256 instead of > 512 > > :-( > > can you mail me the report.bug? > to get it: > > switch to console 2 > put a fat floppy in floppy drive > and type "bug" > > -> it will put report.bug on floppy and this file interests me :) > > > thanks, cu Pixel. * lspci Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge (unknown ignore) Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge (unknown ignore) Intel Corporation|82371AB PIIX4 ISA (unknown unknown) Intel Corporation|82371AB PIIX4 IDE (STORAGE_IDE unknown) Intel Corporation|82371AB PIIX4 USB (SERIAL_USB usb-uhci) Intel Corporation|82371AB PIIX4 ACPI (unknown unknown) Intel Corporation|82557 [Ethernet Pro 100] (NETWORK_ETHERNET eepro100) SubVendor=0x8086 SubDevice=0x0009 Adaptec|AIC-7881U (STORAGE_SCSI aic7xxx) ATI|3D Rage Pro AGP 1X/2X (DISPLAY_VGA Card:ATI Mach64) SubVendor=0x1002 SubDevice=0x0061 * pci_devices 808671900 f808 0008808671910 0038808671100 0039808671110 ffa1 003a808671120 ef81 003b808671130 008080861229b fc5ff008ef41feb0 fea0 00a0900481785 e801fe9ff000 fe9e 010010024742b fd00d801fe6ff000 fe6c * fdisk Disk /dev/sda: 64 heads, 32 sectors, 1002 cylinders Units = cylinders of 2048 * 512 bytes Device BootStart EndBlocks Id System /dev/sda1 * 1 995 1018864 83 Linux /dev/sda2 996 1002 7168 82 Linux swap Disk /dev/sdb: 255 heads, 63 sectors, 529 cylinders Units = cylinders of 16065 * 512 bytes Device BootStart EndBlocks Id System /dev/sdb1 * 1 529 4249161 83 Linux Disk /dev/hda: 255 heads, 63 sectors, 1247 cylinders Units = cylinders of 16065 * 512 bytes Device BootStart EndBlocks Id System /dev/hda1 * 1 1247 10016496 83 Linux Disk /dev/hdb: 1 heads, 1316380 sectors, 1 cylinders Units = cylinders of 1316380 * 512 bytes Disk /dev/hdc: 16 heads, 63 sectors, 26354 cylinders Units = cylinders of 1008 * 512 bytes Device BootStart EndBlocks Id System /dev/hdc1 * 1 26280 13245088+ 83 Linux /dev/hdc2 26281 26354 37296 82 Linux swap Disk /dev/hdd: 16 heads, 63 sectors, 25228 cylinders Units = cylinders of 1008 * 512 bytes Device BootStart EndBlocks Id System /dev/hdd1 * 1 24380 12287488+ 83 Linux /dev/hdd2 24381 252284273925 Extended /dev/hdd5 24381 25228427360+ 82 Linux swap * scsi Attached devices: Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SONY Model: CD-R CDU920S Rev: 2.0b Type: WORM
Re: [Cooker] Diskdrake unable to detect IDE drive partitions
The problem is drakx.. Fdisk reads the drive fine and the OS sees it fine after install. I can mount it without any problem but drakx still can't see it. I use the same drive with same partition with 7.1 and it works fine. Same with RH 6.x worked fine but duing the install of 7.0 I had the same problem. This is a Quantum CR13.0A drive. 1528 cyl 255 heads 63 secs. I will help with what ever I can... Here is the fdisk info. So I just run the install without partitioning this drive and after setup I just add it to fstab. I don't know why this happens on RH7 and Mandrake 7.2 The number of cylinders for this disk is set to 25228. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hdd: 16 heads, 63 sectors, 25228 cylinders Units = cylinders of 1008 * 512 bytes Device BootStart EndBlocks Id System /dev/hdd1 * 1 24380 12287488+ 83 Linux /dev/hdd2 24381 252284273925 Extended /dev/hdd5 24381 25228427360+ 82 Linux swap Command (m for help): On Sat, 14 Oct 2000, you wrote: > Ray <[EMAIL PROTECTED]> writes: > > This is an ongoing problem nad still is not fixed.. > > The same problem happens on RH7 > > ?? what causes the pb? special hardware? is the kernel reading the > partition table or is it a DrakX pb? > > [...] > > > On Sun, 08 Oct 2000, you wrote: > > > On today's 7.2beta install, diskdrake is unable to detect partitions on > > > my IDE drives (primary and secondary) the SCSI drives are detected > > > fine, however. The partition tables were created using fdisk on > > > mandrake 7.1. These same IDE partitions, however, can be seen with no > > > problem in fdisk once linux is installed.
Re: [Cooker] Diskdrake unable to detect IDE drive partitions
This is an ongoing problem nad still is not fixed.. The same problem happens on RH7 On Sun, 08 Oct 2000, you wrote: > On today's 7.2beta install, diskdrake is unable to detect partitions on > my IDE drives (primary and secondary) the SCSI drives are detected fine, > however. The partition tables were created using fdisk on mandrake > 7.1. These same IDE partitions, however, can be seen with no problem in > fdisk once linux is installed.
Re: [Cooker] ftp servers both seem broke
This is a known bug on the rc versions of proftpd. It can be found on their site. They say it is fixed in cvs but don't know when that will make it to a released product. On Fri, 13 Oct 2000, you wrote: > proftp won't allow ANY uploading even when logging in as a user > > put get72: server said: No PORT command issued first. > > wu-ftpd won't respond syslog give an error when you try to log into it - > Can't locate module net-pf-10
[Cooker] deplist
When are the deplist and filelist going to be fixed? It's kind of hard to have a beta that no one can install. It has been 2 days now and this is on all servers
Re: [Cooker] helix gnome
I added the following file to /etx/X11/wmsession.d/ and now it shows up and works.. So it is just missing drom the install On Mon, 09 Oct 2000, you wrote: > [EMAIL PROTECTED] (Ray) writes: > > gnome-core-1.2.1-38 > > The big question is why isn't it in the login panel as a choice > > anymore? > > That's a bug !! But I don't have it here.. What login manager are you > using ? NAME=Gnome ICON=gnome.xpm DESC=Gnome desktop EXEC=/usr/bin/gnome-session SCRIPT: exec /usr/bin/gnome-session
Re: [Cooker] helix gnome
I believe it is kdm.. The standard Mandrake login.. This is a rc1 10-06-2000 build. On Mon, 09 Oct 2000, you wrote: > [EMAIL PROTECTED] (Ray) writes: > > gnome-core-1.2.1-38 > > The big question is why isn't it in the login panel as a choice > > anymore? > > That's a bug !! But I don't have it here.. What login manager are you > using ?
Re: [Cooker] helix gnome
gnome-core-1.2.1-38 The big question is why isn't it in the login panel as a choice anymore? On Mon, 09 Oct 2000, you wrote: > [EMAIL PROTECTED] (Ray) writes: > > I want to try helix gnome under 7.2. Has anyone done this and how do you > > start it? I can't even find where to start gnome anymore. > > What version of gnome-core package do you have on your system ? There > was one buggy version which had a broken startgnome ..