RE: make bzImage. Error al final
el as86 es un ensamblador de 16 bits. lo puedes encontrar en el paquete bin86. -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Enviado el: lunes, 22 de mayo de 2000 18:59 Para: debian-user-spanish@lists.debian.org Asunto: make bzImage. Error al final Tras varios intentos con el mismo resultado os mando esto a ver si me podeis ayudar. Tras configurar el kernel 2.2.12 y hacer make dep, make clean hago make bzImage y me sale al final lo siguiente: make[1]: Entering directory `/usr/src/linux/arch/i386/boot' gcc -D__KERNEL__ -I/usr/src/linux/include -E -D__BIG_KERNEL__ -traditional -DSVGA_MODE=NORMAL_VGA bootsect.S -o bbootsect.s as86 -0 -a -o bbootsect.o bbootsect.s make[1]: as86: Command not found make[1]: *** [bbootsect.o] Error 127 make[1]: Leaving directory `/usr/src/linux/arch/i386/boot' make: *** [bzImage] Error 2 Ese comando as86 no esta en mi equipo y no lo veo como paquete para instalarlo. Ahora tengo Linux 2.0.36. Gracias por la ayuda. Saludos Diego. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Sobre Teclado e Idiomas :-)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 BSD Hola gente ya que alguien pregunto por alla el tema del teclado en griego, yo tengo una pregunta similar, la mi es en hebreo, quisiera escribir en hebreo en la maquina, alguien sabe como mapear el teclado y todo eso? Otra preguntilla ya que estamos :-) Hace un tiempito me baje unos archivos .doc (el #$@ formato de M$) escritos en hebreo, pero no los puedo leer desde linux :-( StarOffice no los reconoce como archivos de word debe ser por el tema de los fonts, alguna solucion a esto? Alguien sabe algun programa con el que pueda ver e imprimir esos archivos desde My Linux Box, desde ya muchas gracias Salu2 Alejandro David Yashan WinError 01F: Reserved for future mistakes of our developers. ;-))) Acentos y e#es omitidas deliberadamente para evitar problemas de lectura con algunos clientes de e-mail Linux Registered User #120401 POWERED BY GNU/Debian Slink 2.1 Kernel 2.2.13 Linux is userfriendly, but is only a bit selective about its friends :-) -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.1 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE5KiWciS3xNWtJnS4RApCDAKDkbHoAN8fidLQLtSNeIFfHGJgnDACfWci7 kjdTFz/I122n7fssGEFblCk= =BDO8 -END PGP SIGNATURE-
RE: printop
Hola, printop sólo te funcionará si utilizas lprng, y estoy casi seguro de que no lo estás utilizando y por eso te falla. Prueba a ver... Javi -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Enviado el: lunes 22 de mayo de 2000 22:09 Para: debian-user-spanish@lists.debian.org Asunto: printop Saludos a [EMAIL PROTECTED] Alguien ha utilizado el printop para gestionar impresoras He intentado arrancarlo pero me da un error sobre la variable printcap_list can't read printcap_list: no such variable while executing foreach i $printcap_list... (procedure insert_buttons line 12) invoked from within . a pesar de estar declarada como global dentro del procedimiento. Alguien sabe algo ?? Gracias anticipadas. Cesar Iriso. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: [ Sugerencia GPG/PGP ]
On Sat, 20 May 2000, Correcaminos wrote: El Sat, May 20, 2000 a las 11:49:53AM +0200, Jordi Mallach dijo: On Thu, May 18, 2000 at 11:08:06PM +0200, Javier Fafián Alvarez wrote: [ Mensaje encriptado ] Sí, yo estoy de acuerdo. -- Jordi Mallach Pérez || [EMAIL PROTECTED] || Rediscovering Freedom, ka Oskuro in RL-MUD || [EMAIL PROTECTED]|| Using Debian GNU/Linux http://sindominio.net GnuPG public information: pub 1024D/917A225E telnet pusa.uv.es 23 73ED 4244 FD43 5886 20AC 2644 2584 94BA 917A 225E Como podemos ver día a día, cada vez somos más los que usamos sistemas de autentificación y seguridad en nuestro correo, utilizando programas como el GPG o el PGP. Yo tengo puesta mi clave publica en search.keyserver.net, lugar en donde además he encontrado las claves públicas de mucha gente conocida. A ver si la peña se anima y las sube a este (u otro) servidor ;) -- =8= ___ _ / ___|_ _| (_) ___ Grupo de Usuarios de LInux de Canarias | | _| | | | | |/ __| Pasate por nuestro web | |_| | |_| | | | (__http://www.gulic.org/ \|\__,_|_|_|\___| Clave GPG en las paginas de Gulic Clave GPG en search.keyserver.net Key fingerprint = F734 17F5 3AB6 E1F6 11C4 B498 5B3E FEDF 90DF =8= Estooo.. Yo no se utilizar PGP. Tengo una idea de como funciona teoricamente pero no se como utilizarlo. Miro el correo con pine desde un servidor con rh. Puede alguien ayudarme? gracias. ¡Hay un ping¨uino en mi ordenador! Ignacio Garcia Fernandez [EMAIL PROTECTED]
Re: [jefuentes@retemail.es: RV: ATENCIÓN! ---- Aviso de Fraude a Gran escala en móviles.]
On Mon, 22 May 2000, Hue-Bond wrote: El lunes 22 de mayo de 2000 a la(s) 00:36:16 +0200, Javier Fafián Alvarez contaba: Si reciben un mensaje, en su teléfono móvil, indicando que llamen al número 0141.455414, no contesten, bajo ningún concepto. ¿Deberíamos creernos esto? Bueno, en principio si te mandan tal mensaje, lo mas prudente es, por lo menos, preguntar a tu operador de movil, no? Yo creo que no es cuestion de creerselo o no, sino de ser prudente en general. Es algo asi como los virus en vbs que uno ejecuta en su ordenador voluntariamente, no? ;) Si es cierto, ya estamos advertidos. Si no... pues da igual. Por cierto, pido disculpas si vuelve a aparecer la advertencia en la lista. Lo he reenviado a un par de direcciones (o 3, o 4) y creo que se ma ha colado la lista. No volvera a ocurrir. Saludos ignacio ¡Hay un ping¨uino en mi ordenador! Ignacio Garcia Fernandez [EMAIL PROTECTED]
RE: fallo al llamar a pppd con RDSI
A mi me da al ojo que lo que tienes es una conexión en la que se tiene que autenticar el servidor remoto. Vamos que parece que le estas prestando servicios a él y no al reves. De todas formas pasanos los archivos de configuración a ver que dicen. Otra cosa que podrías mirar es si la conexión es síncrona o asíncrona. Estas optando por la asíncrona (demonio pppd). Para ello preguntales a los del servidor a ver que te dicen. Cuidadín porque no suelentener mucha idea y responden lo primero que se les ocurre (a mí me ha pasado y me pegué un mes como un loco configurando una síncrona , ipppd, y al final resultaba ser asíncrona, pppd). Venga a ver si entre todos hacemos algo. Saludos Juanma -Mensaje original- De: pepesan [EMAIL PROTECTED] Para: debian-user-spanish@lists.debian.org debian-user-spanish@lists.debian.org Fecha: martes, 23 de mayo de 2000 06:53 Isabel Asunto: fallo al llamar a pppd con RDSI al iniciar el pppd me dice lo siguiente: lupus:/home/pepesan# pon iddeor /usr/sbin/pppd: The remote system is required to authenticate itself /usr/sbin/pppd: but I could´nt find any suitable secret (password) for it to use to do so. /usr/sbin/pppd: (None of the aviable passwords would let it use an IP address.) el kernel parece estar bien configurado el modulo concreto tambien los devices estan existen con el pppconfig esta configurada la conexion iddeor pa que pille la RDSI no se que puede fallar pliz un pelin de ayuda thanks por adelantado -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: MP3 encoder
On Sun, 21 May 2000, Jesus M. Gonzalez-Barahona wrote: Jaime E. Villate writes: [EMAIL PROTECTED] escribió: Por favor decidme que no estoy ciego y que en potato no hay ningún mp3-encoder, porque no consigo encontrar ninguno. Parece que no hay ninguno libre que pueda se incluído en Debian; mira lo que dice el README del paquete cdgrab: Si no recuerdo mal cuando se discutió esto en debian-devel, el problema está en que hay varios paises donde hay patentes sobre técnicas software que son necesarias para codificar en MP3 (entre ellos, EEUU y Alemania). La validez de estas patentes, especialmente la alemana, es más que discutible, pero la gente de Debian, para evitar posibles problemas legales, optaron por no incluir estos paquetes en la dsitribución. ¿No sabías los problemas que pueden causarnos las patentes software? Aquí tienes una de sus primeras consecuencias :-( Recuerdo que los gif tenían un problema similar pero en non-free se proporcionaba soporte para este formato. Habeis mirado en non-free ? Bueno reconozco que no para todo el mundo resulta aceptable usar non-free, pero quizas para otros pueda ser un mal menor. Saludos Antonio Jesus. -- Jesus M. Gonzalez Barahona| Grupo de Sistemas y Comunicaciones [EMAIL PROTECTED] / [EMAIL PROTECTED] | ESCET, Universidad Rey Juan Carlos tel: +34 91 664 74 72 | c/ Tulipan s/n fax: +34 91 664 74 90 | 28933 Mostoles, Spain -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ /\ /\ Ciberdroide Informatica (tienda linux) \\W// http://www.ciberdroide.com _|0 0|_ +-oOOO--(___o___)--OOOo--+ | . . . . U U . . . . Antonio Castro Snurmacher !! Nueva direccion email !! | | http://slug.ctv.es/~acastro. - - - - [EMAIL PROTECTED] | +()()()--()()()--+ +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ (((Donde Linux)))http://www.ciberdroide.com/misc/donde/dondelinux.html +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
RE: No me arranca el rescue disk.
= Original Message From [EMAIL PROTECTED] (Ignasi Modolell) = Hue-Bond [EMAIL PROTECTED] wrote: la memoria, pero no tengo ni idea de cómo confirmarlo, no dispongo de HB memtest86, que es un programita que se instala en un diskette, HB lo metes y él solito hace el trabajo, sin necesidad de tener HB un Probado, el memtest no llega a arrancar, ni con la imagen que me has dejado en el ftp, ni con la precompilada para windows con el rawrite, ni tampoco bajándome los fuentes y compilándolos yo mismo. Llega a cargarse (sale el loading y los puntitos) y cuando va a ejecutarse se queda totalmente bloqueado, ni siquiera llega a borrarse la pantalla, el cursor avanza una línea y ahí se para. Empiezo a sospechar que es problema de la placa, es una 386 de marca desconocida, con chipset Symphony ¿? y BIOS fabricada por DTK Corp. ¿? quizás la BIOS es bastante desastrosa, o el chipset tiene bugs... o algo por el estilo. HB ftp://ftp.cyberchat2000.com/pub/memtest86.raw HB Dado que estoy con una cuenta de prueba, probablemente el HB FTP no funcione; entonces mira en 195.55.160.33. Si esto Por si te sirve de algo, con ftp.cyberchat2000.com no entraba, pero con ftp a la IP sí ha entrado, y se ha bajado la imagen muy rápido. prueba a tocar los timings de memoria en la bios a mi me dipo me dio buen resultado en un 486 que me petaba con el memtest. Turtle inc. over the world.
Re: Sobre Teclado e Idiomas :-)
~ El martes, 23 de mayo del 2000, a las 03:30, [EMAIL PROTECTED] dijo: Sobre Teclado e Idiomas :-) _ -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 BSD Hola gente ya que alguien pregunto por alla el tema del teclado en griego, yo tengo una pregunta similar, la mi es en hebreo, quisiera escribir en hebreo en la maquina, alguien sabe como mapear el teclado y todo eso? Otra preguntilla ya que estamos :-) Hace un tiempito me baje unos archivos .doc (el #$@ formato de M$) escritos en hebreo, pero no los puedo leer desde linux :-( StarOffice no los reconoce como archivos de word debe ser por el tema de los fonts, alguna solucion a esto? Alguien sabe algun programa con el que pueda ver e imprimir esos archivos desde My Linux Box, desde ya muchas gracias ## Package: yudit Status: install ok installed Priority: optional Section: editors Installed-Size: 3660 Maintainer: Bart Schuller [EMAIL PROTECTED] Version: 1.5-2 Depends: freetype2 (= 1.3.1), libc6 (= 2.1), libstdc++2.10, xlib6g (= 3.3.5) Recommends: unifont Conffiles: /etc/yuditrc 49197b0560f22507faa54a496b55fbc3 Description: edit and convert unicode text of different languages. yudit is a unicode text editor for the X Window System. It does not need localized environment or unicode fonts. It supports simultaneous processing of many languages, input methods, conversions for local character standards. 4 versions can be built: with motif, qt or kde, pure X11. This is the base package and it contains the pure X11 gui. The package includes conversion utilities, and it also has support for postscript printing. ## Fijo que hay más programas de este tipo. Pruebalo y nos cuentas ;) -- =8= ___ _ / ___|_ _| (_) ___ Grupo de Usuarios de LInux de Canarias | | _| | | | | |/ __| Pasate por nuestro web | |_| | |_| | | | (__ http://www.gulic.org/ \|\__,_|_|_|\___| Clave GPG en las paginas de Gulic Clave GPG en search.keyserver.net Key fingerprint = F734 17F5 3AB6 E1F6 11C4 B498 5B3E FEDF 90DF =8= pgp76m14moOor.pgp Description: PGP signature
re: ¡Diccionario Alemán-Español!
Gracias a Alfredo y a Ricardo por sus respuestas. Y por el diccionario. En realidad no tengo una lista, sino tres o cuatro, cada una sacada de un sitio diferente. La primera la traje de un archivo de excel que tenía, gracias a aquello de de tab a : que pregunté en la lista. Luego he hecho otras dos, una solo con las palabras básicas, que tengo casi terminada. Y otra con las palabras que voy buscando en mis traducciones. La interesante de momento es la del vocabulario fundamental, pero tengo un problema. Para introducir sinónimos rápidamente cree un macro en el vim, pero con la pega de que dejaba uno o dos espacios al final de la línea que copiaba. El caso es que me gustaría quitarlos, para seguir los criterios de Alfredo, de terminar las líneas con un carácter de nueva línea ^M si no me equivoco. La cosa es que ni en el vim, ni con perl -pe, ni con sed 's/ ^M/^M/g' ni de ningún modo. Supongo que habrá que indicarle los espacios de algún modo especial. Pero sin embargo me funciono que cambiara el tabulador por / : /s. Alguna idea. Gracias. El diccionario lo enviaré a todos los que me lo habéis pedido en está semana. Si todo va bien y soluciono esto. Gracias y un saludo. Isaac Puch Rojo.
re: ¡Diccionario Alemán-Español!
Gracias a Alfredo y a Ricardo por sus respuestas. Y por el diccionario. En realidad no tengo una lista, sino tres o cuatro, cada una sacada de un sitio diferente. La primera la traje de un archivo de excel que tenía, gracias a aquello de de tab a : que pregunté en la lista. Luego he hecho otras dos, una solo con las palabras básicas, que tengo casi terminada. Y otra con las palabras que voy buscando en mis traducciones. La interesante de momento es la del vocabulario fundamental, pero tengo un problema. Para introducir sinónimos rápidamente cree un macro en el vim, pero con la pega de que dejaba uno o dos espacios al final de la línea que copiaba. El caso es que me gustaría quitarlos, para seguir los criterios de Alfredo, de terminar las líneas con un carácter de nueva línea ^M si no me equivoco. La cosa es que ni en el vim, ni con perl -pe, ni con sed 's/ ^M/^M/g' ni de ningún modo. Supongo que habrá que indicarle los espacios de algún modo especial. Pero sin embargo me funciono que cambiara el tabulador por / : /s. Alguna idea. Gracias. El diccionario lo enviaré a todos los que me lo habéis pedido en está semana. Si todo va bien y soluciono esto. Gracias y un saludo. Isaac Puch Rojo.
que RDSI comprar?
Hola. Me acabo de instalar la linea RDSI, pero salvo que me convenzais de lo contrario, no pienso pagar 17 talegos por la novacom dichosa. A ver si me podeis contar alguna tarjeta con buena relacion calidad-precio... que funcione en linux claro! AH! Otra cosa! Se pueden aprovechar los dos canales con algun soporte en el kernel? Es necesario tener 2 tarjetas RDSI? Depende de que tarjeta me compre? Pd: No me importa pelearme hasta que funcione, aunque sea interno (que creo que son bastante mas baratos). Lo que quiero es que sean de la mismas prestaciones que su version externa, supongo que no sera problema... Bueno, espero vuestras respuestas!
RE: que RDSI comprar?
Hola. Me acabo de instalar la linea RDSI, pero salvo que me convenzais de lo contrario, no pienso pagar 17 talegos por la novacom dichosa. A ver si me podeis contar alguna tarjeta con buena relacion calidad-precio... que funcione en linux claro! Hola... Aqui en el trabajo estamos usando una EICON DIVA PCI 2.01 y va bastante bien, y tiene soporte en el nucleo (HiSax). Saludos.
Re: que RDSI comprar?
El martes 23 de mayo de 2000 a la(s) 15:07:43 +0200, Debian Linux User contaba: AH! Otra cosa! Se pueden aprovechar los dos canales con algun soporte en el kernel? Es necesario tener 2 tarjetas RDSI? Depende de que tarjeta me compre? Depende de la tarjeta. Yo he elegido una Teles 16.3c, ISA :^). Sólo tiene un canal. Funciona ok (a pesar de los quebraderos de cabeza que tuve por comerme una opción al cargar el módulo :^)). -- Just do it. David Serrano [EMAIL PROTECTED]Linux 2.2.14 - Reg. User #87069 Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread! pgphsXFmvmI2h.pgp Description: PGP signature
printop
Efectivamente. Ese era el problema : lpd estaba fuera de juego. Gracias. Nos leemos. Cesar.
Re: que RDSI comprar?
Guenas On Tue, May 23, 2000 at 03:07:43PM +0200, Debian Linux User wrote: Hola. Me acabo de instalar la linea RDSI, pero salvo que me convenzais de lo contrario, no pienso pagar 17 talegos por la novacom dichosa. A ver si me podeis contar alguna tarjeta con buena relacion calidad-precio... que funcione en linux claro! Las viejas Teles 16.3 ISA, las modernas Billion PCI, otras con chip Winbond marca la bellota, etc... Todas estas van de fabula. Saludines -- -- Andres Herrera [EMAIL PROTECTED] Grupo de Empresas Antakira ---
Fwd: Sistema Operativo Programa PADRE]
Me ha gustado lo del santo. (San KoreDumper) Se le podría poner una capilla virtual. No? ;-DD Saludos. Cesar.
imagen de disco duro ¿cómo?
Ante todos saludos amigos: Me plantean un problema en un lugar que tienen bastantes ordenadores accedidos por críos. El problema es que no paran de enredar en ese sistema operativo y cada poco tiempo tienen que reinstalar todo. Siendo unas 22 máquinas la faena resulta larga y aburrida. Se me ha ocurrido el hacer una imagen de un disco duro con una instalación reciente. Como todas las máquinas son iguales había pensado en grabar el fichero de imagen a un CDR. es decir: dd if=/dev/hda of=fichero El tamaño del fichero ocupa unops 850 mb (el tamaño del disco duro), por lo que no me cabe en un CDR. Si lo comprimo con tar se me queda en 240 mb y este tamaño parece más apropiado. ¿como puedo volcar el fichero grabado en el cdrom al disco duro del puesto? porque lo ideal sería hacer un pipe o algo así de manera que mientras va descomprimiendo va volcando la imagen. He probado pero no hallo la solución. Recibid mi gratitud por adelantado Saludos
RE: imagen de disco duro ¿cómo?
Juanma escribió: El problema es que no paran de enredar en ese sistema operativo y cada poco tiempo tienen que reinstalar todo. Siendo unas 22 máquinas la faena resulta larga y aburrida. Si las 22 máquinas son iguales puedes plantearte la opción de montar un servidor de imagenes. Aqui en el curro monté uno hace poco, son 7 maquinas con guindos y un servidor con Linux. La imagen de un disco ocupado por 3 Gigas me ocupa 10 ficheros de 97 Megas (supongo que debe estar hecho para meterlos en Zips) es decir, no llega a 1 Giga. Se descarga la imagen al disco duro y despues la descomprime automaticamente. Necesitas tener instaladas tarjetas de red con soporte de arranque remoto en los clientes. Puedes encontrar mas información sobre esto en: http://cuiwww.unige.ch/info/pc/remote-boot/howto.html Los programas los puedes bajar de: http://www.bpbatch.org/downloads Y ademas hay un forum por si no te acaban de salir las cosas. http://www.bpbatch.org/forum Creo que es una buena opción, lo de meter la imagen en un CDR seguro que hay algun programa parecido a este que permite hacerlo sin demasiada complicación, si lo encuentras avisas que me interesa bastante. Espero que te sirva, si decides montarlo te puedo pasar información de como lo hicimos aqui. TA LUEG. Quimi - Mi petición de drivers para Linux es la nº 39921 (Pasate por http://www.libranet.com/petition.html ;-)
Re: imagen de disco duro ¿cómo?
Hola, he oido que se puede dejar en el servidor y con un disquette con una version de debian muy pequena y con ftp mandas la imagen completa y ya esta... no lo he probado yo mismo pero me suena muy razonable Saludos Alejandro Romero Multimedios Estrellas de Oro www.multimedios.com.mx Juanma[EMAIL PROTECTED] 05/23/00 10:21am Ante todos saludos amigos: Me plantean un problema en un lugar que tienen bastantes ordenadores accedidos por críos. El problema es que no paran de enredar en ese sistema operativo y cada poco tiempo tienen que reinstalar todo. Siendo unas 22 máquinas la faena resulta larga y aburrida. Se me ha ocurrido el hacer una imagen de un disco duro con una instalación reciente. Como todas las máquinas son iguales había pensado en grabar el fichero de imagen a un CDR. es decir: dd if=/dev/hda of=fichero El tamaño del fichero ocupa unops 850 mb (el tamaño del disco duro), por lo que no me cabe en un CDR. Si lo comprimo con tar se me queda en 240 mb y este tamaño parece más apropiado. ¿como puedo volcar el fichero grabado en el cdrom al disco duro del puesto? porque lo ideal sería hacer un pipe o algo así de manera que mientras va descomprimiendo va volcando la imagen. He probado pero no hallo la solución. Recibid mi gratitud por adelantado Saludos -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: imagen de disco duro ¿cómo?
Parece tarea para el 'dump', Un saludo. Ante todos saludos amigos: Me plantean un problema en un lugar que tienen bastantes ordenadores accedidos por críos. El problema es que no paran de enredar en ese sistema operativo y cada poco tiempo tienen que reinstalar todo. Siendo unas 22 máquinas la faena resulta larga y aburrida. Se me ha ocurrido el hacer una imagen de un disco duro con una instalación reciente. Como todas las máquinas son iguales había pensado en grabar el fichero de imagen a un CDR. es decir: dd if=/dev/hda of=fichero El tamaño del fichero ocupa unops 850 mb (el tamaño del disco duro), por lo que no me cabe en un CDR. Si lo comprimo con tar se me queda en 240 mb y este tamaño parece más apropiado. ¿como puedo volcar el fichero grabado en el cdrom al disco duro del puesto? porque lo ideal sería hacer un pipe o algo así de manera que mientras va descomprimiendo va volcando la imagen. He probado pero no hallo la solución. Recibid mi gratitud por adelantado Saludos -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Correo de Microsoft en Debian
Hola a todos, On Sat, May 20, 2000 at 08:44:52AM -0500, Camilo Alejandro Arboleda wrote: ... Alguien sabe si es posible leer el correo de microsoft en debian? Es que en mi trabajo tienen una red Microsoft y no estan interesados en cambiar, así que para poder instalar debian en mi computador necesito asegurar compatibilidad total. ... Bueno yo tuve suerte de no tener que pedir permiso a nadie :-), pero lo tengo muy claro: una intranet es utilizar servicios estandard de internet pero para uso exclusivo dentro de la empresa, y *LO BUENO* es que utilizas servicios abiertos y estandar para los que no tendras *NINGUN* problema de plataforma. Te recomiendo que aconsejes utilizar servicios estandar y documentados, como SMTP, POP3, IMAP, mensajes en formato MIME, y desaconsejes encarnizadamente protocolos y servicios propietarios y cerrados. Los servidores Microsoft se pueden configurar para usar Internet Mail en lugar de Microsoft Mail que emplea un formato de adjuntos extraño. Ademas conozco varios casos en los que no se aclaran con el NT y me llegan mensajes con adjuntos no-MIME (llegan ilegibles), y conozco otra empresa a la que de cuando en cuando se le escapan adjuntos ilegibles con el mismo contenido que el cuerpo del correo (según ellos). ¿Tiene sentido utilizar un formato de adjuntos diferente dentro de la empresa que con la gente de fuera? Yo creo que no y ademas introduce riesgos de incompatibilidad. EN RESUMEN CON SERVICIOS ESTANDAR: Utilizas los mismos formatos y servicios que en internet, no tendras problemas con nadie. No te atas a una empresa concreta, y a sus caprichos. Tienes la posibilidad de cambiar de S.O. de forma transparente a los usuarios. CON SERVICIOS PROPIETARIOS: Aparecen problemas raros con otras empresas que usan clientes Netscape y otros softwares: afortunadamente *NO* todo el mundo usa Microsoft No tienes ninguna opción de cambio de S.O. (que es lo que ellos quieren) Fuerzas a tus clientes/proveedores a usar lo mismo que tu para no tener problemas o les complicas la vida con problemas de compatibilidad Espero haberte servido de ayuda... Saludos, -- - Manel Marin e-mail: [EMAIL PROTECTED] Linux Powered (Debian 2.1 slink) kernel 2.2.14 Mira mis chuletas de Linux en http://perso.wanadoo.es/manel3 - Mi petición de drivers para Linux es la nº 33126 (Pasate por http://www.libranet.com/petition.html ;-)
Re: LILO y otras cosas de portatiles
Hell-o Jaime E. Villate! El día Mon, May 22, 2000 at 09:16:53AM +0100 decías: ¿que portatil tienes? en el mio la bzImages no dan ningun problema Un Toshiba Satellite 4010CDS; pero como ya he dicho en otro mensaje, el núcleo 2.2 ya funciona perfectamente como bzimage ya me parecía a mi ;) NPI. Y ya que hablamos de portatiles, ¿te funciona bien el tema de APM?. A mi me cuelga la máquina Me funciona perfectamente. Tanto para apagar como para entrar en modo suspend (realmente ya nunca apago el portátil). ¿Has intentado con las varias opciones que hay en la configuración del núcleo? me acuerdo por ahí de unas 3 opciones que dicen que se deben activar para algunos casos en que el APM da problemas. ahora mismo lo he estado probando con todas las opciones y he tenido un cuelgue, pero parece que despues de quitar el apmd todo va bien. ¿tu lo tienes instalado? -- Nos leemos... .--. -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- |o_o | SKaVeN - [EMAIL PROTECTED] |:_/ | Linux Pauered (Debian GNU/Linux 2.2 Potato) // \ \ Linux Registered User #158497 (http://counter.li.org) (| | ) -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-/'\_ _/`\ \___)=3D(___/
segment fault en passwd
hola, me gustaria comentar algo que realmente me a sorprendido. cuando un usuario en mi sistema intenta cambiar su password, todo trascurre normalmente, a menos que este usuario NO tuviera anteriormente un password, lo que provoca un pedazo de segment fault; sin embargo con el root no me pasa... la version de packete password es 19990827-19 alguien sabe por donde pueden ir los tiros? -- /--\ | Miembro de LiMA (Linux Málaga) | | (güeno, más o menos) | | http://lima.telenet.es | \--/ / rebeldin es un i486 con \ | Debian LiNUX 2.2,Kernel 2.2.14 | \--/
Re: make bzImage. Error al final
Gracias de mi parte también. Tenía el mismo problema y de momento va, es un viejo 486 que tengo para experimentos y se toma su tiempo en compilar. Pero tiene que funcionar. Agradecido. Isaac Puch Rojo. Diego Bote wrote: Gracias a Jordi, Agustín y Ugo. Exactamente lo que decís, el paquete bin86. make[1]: as86: Command not found apt-get install bin86 * Diego Bote BarcoEscuela de Ingenierías Industriales Área de Matemática Aplicada Avda. de Elvas s/nº Departamento de Matemáticas C.P.: 06071 BADAJOZ Universidad de Extremadura Tlf.: 924 289600 ext 9754 Fax: 924 289601 * -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: imagen de disco duro ¿cómo?
Buenas ante todo... he estado trabajando en una tienda informatica y todas las instalaciones que haciamos en equipos nuevos las haciamos con una utilidad llamada ghost (de la casa Norton) que hace una copia exacta de una particion (ya sea Ms-Dos o Linux) a otra o en nuestro caso a un fichero. Con respecto al tamaño el propio programa puede comprimir los datos con lo que es facil no superar las 650 Mbs de un CD-R, si ademas haces que el cd-R sea de arraque la faena se hace sencilla... Pones el Cd, arrancas (y si lo tienes configurado como toca) y se instala todo solo, bueno Yo lo he usado en concreto con particiones Ms-Dos... Supongo no sera tan sencillo con particiones Linux por el tema de arranque... pero de eso ya no puedo decir =) *-* |Jorge Garcia Roca| | Programador y Poeta | | E-Mail: [EMAIL PROTECTED] | | WWW: http://www.uv.es/~jgarcia/ | *-*
Re: imagen de disco duro ¿cómo?
El martes 23 de mayo de 2000 a la(s) 17:21:52 +0200, Juanma contaba: Si lo comprimo con tar se me queda en 240 mb y este tamaño parece más apropiado. Dirás que lo comprimes con gzip no? ¿como puedo volcar el fichero grabado en el cdrom al disco duro del puesto? Pues 'gunzip -c /directorio/del/archivo /dev/hda' -- Just do it. David Serrano [EMAIL PROTECTED]Linux 2.2.14 - Reg. User #87069 Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread! pgpu6pIyAym2E.pgp Description: PGP signature
Re: fallo al llamar a pppd con RDSI
Hola Tienes que hacerlo con el ipppd = ippp0no con ppp0 supongo que sera de ayuda la mi placa es un TELES 16.3 c PNP ISAno tengo ningun poblema con ningun linux Saludos de Benet - Original Message - From: pepesan [EMAIL PROTECTED] To: debian-user-spanish@lists.debian.org Sent: Tuesday, May 23, 2000 6:45 AM Subject: fallo al llamar a pppd con RDSI al iniciar el pppd me dice lo siguiente: lupus:/home/pepesan# pon iddeor /usr/sbin/pppd: The remote system is required to authenticate itself /usr/sbin/pppd: but I could´nt find any suitable secret (password) for it to use to do so. /usr/sbin/pppd: (None of the aviable passwords would let it use an IP address.) el kernel parece estar bien configurado el modulo concreto tambien los devices estan existen con el pppconfig esta configurada la conexion iddeor pa que pille la RDSI no se que puede fallar pliz un pelin de ayuda thanks por adelantado -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Correu electronic gratuit a Barcelona. Per sol.licitar-lo ves a http://www.bcntelecom.net/ © 2000 @bcntelecom.net
Re: ¡Diccionario Alemán-Español!
El Tue, May 23, 2000 at 02:57:16PM +0200, Isaac Puch Rojo dijo: ... En realidad no tengo una lista, sino tres o cuatro, cada una sacada de un sitio diferente. La primera la traje de un archivo de excel que tenía, gracias a aquello de de tab a : que pregunté en la lista. Luego he hecho otras dos, una solo con las palabras básicas, que tengo casi terminada. Y otra con las palabras que voy buscando en mis traducciones. La interesante de momento es la del vocabulario fundamental, pero tengo un problema. Para introducir sinónimos rápidamente cree un macro en el vim, pero con la pega de que dejaba uno o dos espacios al final de la línea que copiaba. El caso es que me gustaría quitarlos, para seguir los criterios de Alfredo, de terminar las líneas con un carácter de nueva línea ^M si no me equivoco. La No hace falta ^M (ASCII 13), basta con el caracter nueva linea (ASCII 10) que introducen los editores de texto en linux al pulsar la tecla INTRO cosa es que ni en el vim, ni con perl -pe, ni con sed 's/ ^M/^M/g' ni de ningún modo. Supongo que habrá que indicarle los espacios de algún modo especial. Pero sin embargo me funciono que cambiara el tabulador por / : /s. Alguna idea. Gracias. Desde el vim en modo comando: :%s/\s*$// deberia quitar cualquier numero de blancos al final de linea en todo el fichero El diccionario lo enviaré a todos los que me lo habéis pedido en está semana. Si todo va bien y soluciono esto. Gracias y un saludo. Isaac Puch Rojo. Un saludo. Alfredo. -- Linux registered user #98432 Running Debian/GNU Linux 2.1 with kernel 2.2.15 Homepage at http://darkd.virtualave.net
Re: imagen de disco duro ?c?mo?
El Tue, May 23, 2000 at 05:21:52PM +0200, Juanma dijo: Ante todos saludos amigos: ¿como puedo volcar el fichero grabado en el cdrom al disco duro del puesto? porque lo ideal sería hacer un pipe o algo así de manera que mientras va descomprimiendo va volcando la imagen. En teoría nombrando el fichero de dispositivo como destino deberias poder hacerlo. ( Por ejemplo /dev/hda el primer disco duro ) O estas diciendo que el descompresor se niega a volcar sobre un dispositivo. En ese caso obligalo a que descomprima por la salida estandar, y lo redireccionas al fichero. cat /dev/cdrom | gzip -dc - /dev/hda ( hda es el primer disco ide, como ya sabras ) Eso descomprimiría el disco a lo basto, es decir machacando tablas de particiones y demas. salvar... dd if=/dev/hda | gzip - imagen.backup.gz restaurar... dd if=/dev/cdrom | gzip -dc - /dev/hda Por otro lado te advierto de lo siguiente, alguno supuestos S.O ( W* ) guardan la geometria lógica del disco en su partición ( creo que estupido, cuando puede preguntarsela al bios ). Bueno pues que si haces una sola copia para todas las maquinas, solo funcionará en las maquinas exactamente con la misma geo de disco, con exactamente el mismo disco duro y en el mismo modo ( LBA ), deberian funcionarte perfectamente. Repasa lo anteriores comandos probandolos sobre un disco ram ( /dev/ram ) y con pequeños gz, como comprenderas no los he probado :), Esto esta bajo la GPL 2.0 ¿ vale ? ;D PD: La tabla de particiones ocupa 16*4 bytes ( + 2 byte de firma ) y empieza en el byte 446, por si quieres experimentar... Un saludo. -- Ismael. pgpOCkf1XgMjx.pgp Description: PGP signature
Re: segment fault en passwd
El Mon, May 22, 2000 at 02:20:26AM +0200, Tito Sam dijo: hola, me gustaria comentar algo que realmente me a sorprendido. cuando un usuario en mi sistema intenta cambiar su password, todo trascurre normalmente, a menos que este usuario NO tuviera anteriormente un password, lo que provoca un pedazo de segment fault; sin embargo con el root no me pasa... Me pasa lo mismo... la version de packete password es 19990827-19 La mia la 27-18 alguien sabe por donde pueden ir los tiros? N.P.I -- /--\ | Miembro de LiMA (Linux Málaga) | | (güeno, más o menos) | | http://lima.telenet.es | \--/ / rebeldin es un i486 con \ | Debian LiNUX 2.2,Kernel 2.2.14 | \--/ -- pgpCipiFQQ3WE.pgp Description: PGP signature
Driver Tulip en slink 2.1
Al configurar mi tarjeta de red (Cnet pro/120 fast ethernet) con el driver tulip realizo los siguientes pasos: insmod tulip ifconfig eth0 192.168.1.2 netmask 255.255.255.0 up Cuando ejecuto el segundo comando me aparece este mensaje: Unable to handle kernel paging request at virtual address ed640010 current-tss.cr3 = 02e1d000, %cr3 = 02e1d000 *pde = Oops: CPU:0 EIP:0010:[04831a8a] EFLAGS: 00010246 eax: fff8 ebx: 2d640010 ecx: edx: 00fff018 esi: 002d1818 edi: 002d1818 ebp: de00 esp: 03695e60 ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Process ifconfig (pid: 173, process nr: 24, stackpage=03695000) Stack: 00fff018 002d1818 0010 0001 07f8 001b6728 ffaa0055 0246 00139a60 06b4 0001 00fff018 001f 002d1818 fff8 02ddc6cc 00139e6b 06b4 0001 048332eb 0602 00fff018 00fff018 Call Trace: [00139a60] [00139e6b] [048332eb] [048318c0] [0013a521] [0013af6a] [0013b4bb] [0015025b] [00136cad] [0012d7e7] [0010a8c1] Code: 8a 13 8b 74 24 68 88 56 28 83 7c 24 6c 00 74 18 8b 44 24 38 Segmentation fault Please HElp me.Gracias (uso el kernel 2.0.36 y con las serie 2.2.xx me da el mismo mensaje) Get free email and a permanent address at http://www.netaddress.com/?N=1
Gestión Personal Eficaz
Estimado Líder, Si hace lo que siempre ha hechoobtendrá lo quesiempre ha obtenido ( Paul J. Meyer ) Interrogantes ¿Es el tiempo el recurso más importante que posee? ¿Ejerce Ud. un control adecuado de su tiempo? ¿Cómo piensa aumentar su productividad personal? ¿Planificó sus actividades para el año 2.000? ¿Inviertesu tiempo para obtener un resultado directo? ¿Tiene un Plan de Acción? ¿Reservó tiempo suficiente para sus proyectos prioritarios? ¿Espera llegar a fin de año y haber logrado las metas que se fijó? Inversiones productivas, fusiones, adquisiciones, procesos de globalización, fuerte competencia, nuevos desarrollos, cambios tecnológicos permanentes,e_commerce,etc , conforman un panorama complejo que nos afecta directamente y que necesitadelmejor aprovechamientode nuestras habilidades y recursos para ser más productivos, eficientes y exitosos. Optimizar su negocio/actividad o .., Ud. decide. "Programa deGestión Eficaz " 17° Evento 1° DE JUNIO DE 2.000DE 17 A 21.30 HS. LMI: LA MAYOR EMPRESADEL MUNDO EN RESULTADOS Leadership Management International es una organización dedicada a la formación y desarrollo de líderes emprendedores. LMI se especializa en transformar talentos y competencias en resultados medibles, efectivos y duraderos. En resumen, somos especialistas en resultados, ofreciendo a nuestros clientes una metodología exclusiva y testeada en el mundo entero. LMI en números -38 años desarrollando líderes emprendedores -Presente en más de 60 países -Programas en 21 idiomas -Metodología de alta potencia: Aprendizaje Activo Ó, basado en Planes de Acción y resultados -Facturación superior a u$s 2 billones -Más de 2 millones de programas vendidos -2.500 profesionales expertos en liderazgo en todo el mundo Objetivos del Programa Aumentar la productividad personal y profesional, entre un 10 y un 20 %. Encontrar el tiempo necesario para trabajar en metas importantes para su negocio / actividad. Contar con un sistema eficaz para gestionar todos los compromisos diarios. Ser más proactivo y equilibrado en todas las áreas de la vida. Reconocer las Actividades de Máxima Rentabilidad. Delegar adecuada y sistemáticamente. Implementar un seguimiento efectivo. Mejorar significativamente su eficiencia utilizando el Sistema de Gestión Personal Eficaz. PROGRAMA DE GESTION PERSONAL EFICAZ I.-Contenido Programático Principios de la Gestión Personal Eficaz Principio 80/20.Gestión por Crisis. La tiranía de lo Urgente. Gestión Proactiva. Saber que hacer a continuación. Los Beneficios de planificar y fijar metas. Convertirse en una Persona Total Los Diez Compromisos. La Rueda de la Vida. Hacer funcionar la Rueda de la Vida. Lista Maestra de Sueños. Planificación y Fijación de Metas Hoja de Misión / Propósito. Hoja de Planificación Mensual. Hoja de Planificación de Metas. Seguimiento de Metas.Afirmaciones.Planificador del Mes.Planificación Futura.Pasos para la Planificación mensual. Planificación y Organización Diaria Hoja de Planificación y Organización Diaria.Hoja de Notas. Planificador de Reuniones. Índice.Plan de Comunicación.Organización Diaria. Planificador de Reuniones.Plan de Delegación.Pasos para la Organización Diaria. II. Duración Dos reuniones Grupales de hasta 7 participantes, totalizando 7,5 horas de actividad; una sesión individual de fijación de metas y objetivos. III. Beneficios Adicionales Test de liderazgo para cada participante. Consultas telefónicas / e_mails post curso gratuitas. Grupos reducidos (Máximo 7 personas). Diploma emitido por Leadership Management. Posibilidad paraEmpresas de dictadoin company. IV. Material Contenidos de alta calidad desarrollados, actualizados y producidos en EEUU, que incluyen un sistema calendarizado de más de 500 páginas. V. Horario, Lugar La primera reunión tendrá lugar el día jueves 1 de junio de 2.000, a las 17 hs. ennuestras oficinas en el microcentro de la Ciudad de Buenos Aires. VI. Inversión El valor por la totalidad del programa es de $ 220 por participante (Vacantes Limitadas). Roque Saenz Peña 615 Piso 6° Oficinas 626/9 (1035) Ciudad de Buenos Aires. Informes eInscripcionesTelFax :(011) 4328 4244 E_mails : LMI@ciudad.com.ar / [EMAIL PROTECTED]/ Site LMI : www.LMI-Inc.com
Re: Dumb X Windows Question
XF86Setup is the program you want to run to set up 'X' which creates XF86Config. Have you tried running XF86Setup as root? Do you have 'xbase' installed? Have you verified XF86Setup exists on your system? Just some things I would look for. hth, kent Jay Kelly wrote: Ok I have another dumb question. If I want to install X Windows what do I do. I have already tried apt-get install xserver-svga and it installs, but when I try to run the XF86Config I get command not found and I get the same for XF86Setup. What did I forget to install?
Re: Dumb X Windows Question
At 08:57 PM 5/22/00 -0700, Jay Kelly wrote: Ok I have another dumb question. If I want to install X Windows what do I do. I have already tried apt-get install xserver-svga and it installs, but when I try to run the XF86Config I get command not found and I get the same for XF86Setup. What did I forget to install? XF86Config isn't a command; it's a data file. The command is xf86config. I imagine it is in xserver-common. XF86Setup is a command, but it's from a supplemental package ... xf86setup, I believe ... and it requires that you have the VGA16 X server installed (package xf86-vga16). Never tell me the odds!--- Ray Olszewski-- Han Solo Palo Alto, CA[EMAIL PROTECTED]
FW: Dumb X Windows Question
-Original Message- From: Andrew McRobert [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 23, 2000 12:04 PM To: 'Jay Kelly' Subject: RE: Dumb X Windows Question ... try these .debs at least xfree86-common xlib6g xf86setup ... just apt-get update then apt-get install package-name Andrew -Original Message- From: Jay Kelly [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 23, 2000 11:57 AM To: debian-user@lists.debian.org Subject: Dumb X Windows Question Ok I have another dumb question. If I want to install X Windows what do I do. I have already tried apt-get install xserver-svga and it installs, but when I try to run the XF86Config I get command not found and I get the same for XF86Setup. What did I forget to install? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
SCSI bus reset when burning
My scsi bus appears to want to reset everytime I try to burn a CD. My dmesg log gets errors like this: scsi : aborting command due to timeout : pid 232511, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 2f e0 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 236020, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 1f 30 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 237829, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 08 40 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. Scsi id 0 is my burner, so it appears to be having some kind of problem. Does anyone know how to solve this or why the scsi bus wants to reset? Any help would be appreciated since I can't burn CDs until this is figured out. TIA. Rob -- [EMAIL PROTECTED] 1999-00 | Aka Khyron the Backstabber | LI NN N U U X X O ICQ# 2325055| LI N NN U U X | LLL I N N UUU X X O Shackles cannot keep me bound | Those who can, do. forever. I'm outta here. |
X Weirdness
hi I've installed X 3.3.6-6 on my Toshiba Sat Pro 4270 (laptop). The machine has an S3 Savage card, and I've installed the latest drivers from the s3 site. The server is identifying my machine's video card correctly, and is not producing any errors on start up ... BUT ... all I get is a blank screen when I 'startx' ... the output from my X session is as follows: XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.12-20 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct6, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, smi, generic (using VT number 7) XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: xfree86 (**) XKB: model: pc104 (**) XKB: layout: us (**) XKB: variant: nodeadkeys (**) Mouse: type: IMPS/2, device: /dev/psaux, samplerate: 60 (**) Mouse: buttons: 5 (**) Mouse: zaxismapping: (-)4 (+)5 (**) SVGA: Graphics device ID: S3 Savage IX/MV (**) SVGA: Monitor ID: Primary-Monitor (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unsca led,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1, /usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib /X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi (--) SVGA: PCI: S3 Savage/IX (Macrovision) rev 17, Memory @ 0xf000 (--) SVGA: SAVAGE: Savage/MX rev 11, Linear FB @ 0xf000 (--) SVGA: Detected S3 Savage/MX (--) SVGA: using driver for chipset s3_savage (--) SVGA: videoram: 8192k (--) SVGA: Ramdac speed: 250 MHz (--) SVGA: Detected current MCLK value of 83.045 MHz (--) SVGA: VBE Version 2.0 (--) SVGA: BIOS label is S3 Incorporated. M7 BIOS X connection to :0.0 broken (explicit kill or server shutdown). - Andrew McRobert LLB B.Sc(Comp. Sci) IT Officer, School of Law MURDOCH UNIVERSITY Ph: 9360 6479 Fax: 9310 6671 e-mail: [EMAIL PROTECTED]
RE: SCSI bus reset when burning
Does your SCSI drive work if you try to mount it like a CDROM ? Do you have any other SCSI devices (hard drive/another CD etc) Have you considered setting the scsi ID to something like 2 through 5? the card is often ID6. Can you please post the dmesg lines from boot that show what scsi devices are detected? -- From: Rob Rati[SMTP:[EMAIL PROTECTED] Reply To: [EMAIL PROTECTED] Sent: Tuesday, 23 May 2000 5:23 PM To: debian-user@lists.debian.org Subject:SCSI bus reset when burning My scsi bus appears to want to reset everytime I try to burn a CD. My dmesg log gets errors like this: scsi : aborting command due to timeout : pid 232511, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 2f e0 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 236020, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 1f 30 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 237829, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 08 40 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. Scsi id 0 is my burner, so it appears to be having some kind of problem. Does anyone know how to solve this or why the scsi bus wants to reset? Any help would be appreciated since I can't burn CDs until this is figured out. TIA. Rob -- [EMAIL PROTECTED] 1999-00 | Aka Khyron the Backstabber | LI NN N U U X X O ICQ# 2325055| LI N NN U U X | LLL I N N UUU X X O Shackles cannot keep me bound | Those who can, do. forever. I'm outta here. | -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: FW: Dumb X Windows Question
You might want to try 'task-xwindows' or something similar. I'm not sure which it is, but will install just about everything you need. Andrew McRobert spoke forth with the blessed manuscript: -Original Message- From: Andrew McRobert [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 23, 2000 12:04 PM To: 'Jay Kelly' Subject: RE: Dumb X Windows Question ... try these .debs at least xfree86-common xlib6g xf86setup ... just apt-get update then apt-get install package-name Andrew -Original Message- From: Jay Kelly [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 23, 2000 11:57 AM To: debian-user@lists.debian.org Subject: Dumb X Windows Question Ok I have another dumb question. If I want to install X Windows what do I do. I have already tried apt-get install xserver-svga and it installs, but when I try to run the XF86Config I get command not found and I get the same for XF86Setup. What did I forget to install? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Firewall problems
you have to make sure you have your firewall set to accept ICMP traffic. to have ipchains handle ICMP traffic you must use something like: ipchains -A input -p ICMP -j ACCEPT David [EMAIL PROTECTED] On Mon, May 15, 2000 at 07:10:40PM -0600, Dwayne C . Litzenberger wrote: I can only half-ping the outside world through my firewall. That is, my firewall will forward ping requests, but it won't forward the replies (although iptraf reports that it is getting them). I can also ping the firewall from the workstations, and the workstations from the firewall. I have ipchains -P forward ACCEPT. What am I doing wrong? -- Please always Cc to me when replying to me on the lists. Real hackers mostly think crackers are lazy, irresponsible, and not very bright, and object that being able to break security doesn't make you a hacker any more than being able to hotwire cars makes you an automotive engineer. -- The Hacker HOWTO Dwayne C. Litzenberger - [EMAIL PROTECTED] See the mail headers for GPG/advertising/homepage information.
Re: POP3
Try XMail : http://www.maticad.it/davide/xmail.asp it's a SMTP server ( like sendmail, qmail, etc .. ) as long as a POP3 server and has a lot of other features. Is sendmail a POP3 server? No, if You use sendmail, qmail, ... that are SMTP servers You must install something like qpopper ( or courrier IMAP if You want IMAP ) to pop mail from the server. Davide -- Feel free, feel Debian !
Webmail
hi while I'm waiting in hope re: my X Win qstn, does anyone know of a good Web mail package (ie. let's you download mail from another POP server look @ it through WWW. ta A - Andrew McRobert LLB B.Sc(Comp. Sci) IT Officer, School of Law MURDOCH UNIVERSITY Ph: 9360 6479 Fax: 9310 6671 e-mail: [EMAIL PROTECTED]
Re: Simple Text Editor with Synatx highlighting?
Use vim. It's hard to learn, but it is worse it. It's fast.
Re: SCSI bus reset when burning
Here's what dmesg says about my scsi chain. I have 2 hds, 1 dvd drive, and a burner on it. The burner works great when I mount it as a cd-rom drive. No apparant problems at all. The SCSI card is on ID 7, but the ID of the device shouldn't matter should it? As long as it's not the same ID as another device on the chain. None of the other devices have any problems, just the burner causes the SCSI bus to reset. (scsi0) Adaptec AHA-294X Ultra SCSI host adapter found at PCI 0/10/0 (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs (scsi0) Downloading sequencer code... 423 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4 Adaptec AHA-294X Ultra SCSI host adapter scsi : 1 host. (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: YAMAHAModel: CRW6416S Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 (scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 8. Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 (scsi0:0:3:0) Synchronous at 40.0 Mbyte/sec, offset 8. Vendor: COMPAQModel: 3391SSRev: C70E Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 3, lun 0 (scsi0:0:4:0) Synchronous at 40.0 Mbyte/sec, offset 8. Vendor: COMPAQModel: 3391SSRev: C424 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0 scsi : detected 2 SCSI cdroms 2 SCSI disks total. sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.07 sr1: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB] Rob C. Falconer wrote: Does your SCSI drive work if you try to mount it like a CDROM ? Do you have any other SCSI devices (hard drive/another CD etc) Have you considered setting the scsi ID to something like 2 through 5? the card is often ID6. Can you please post the dmesg lines from boot that show what scsi devices are detected? -- From: Rob Rati[SMTP:[EMAIL PROTECTED] Reply To: [EMAIL PROTECTED] Sent: Tuesday, 23 May 2000 5:23 PM To: debian-user@lists.debian.org Subject:SCSI bus reset when burning My scsi bus appears to want to reset everytime I try to burn a CD. My dmesg log gets errors like this: scsi : aborting command due to timeout : pid 232511, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 2f e0 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 236020, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 1f 30 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 237829, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 08 40 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. Scsi id 0 is my burner, so it appears to be having some kind of problem. Does anyone know how to solve this or why the scsi bus wants to reset? Any help would be appreciated since I can't burn CDs until this is figured out. TIA. Rob -- [EMAIL PROTECTED] 1999-00 | Aka Khyron the Backstabber | LI NN N U U X X O ICQ# 2325055| LI N NN U U X | LLL I N N UUU X X O Shackles cannot keep me bound | Those who can, do. forever. I'm outta here. | -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- [EMAIL PROTECTED] 1999-00 | Aka Khyron the Backstabber | LI NN N U U X X O ICQ# 2325055| LI N NN U U X | LLL I N N UUU X X O Shackles cannot keep me bound | Those who can, do. forever. I'm outta here. |
Re: Mouse doesn't work in Xwindow, NFS, bug(3.)???
On Mon, 22 May 2000, Justin Megawarne [EMAIL PROTECTED] wrote: And Philip Lehman bestowed upon us all: On Mon, 22 May 2000, Antonio Rodriguez [EMAIL PROTECTED] wrote: prw-r--r--1 root root0 May 22 23:01 /dev/gpmdata If you don't have any gpmdata fifo, create one with `mknod /dev/gpmdata p` and try again. I thought gpm automatically created the FIFO? Or am I wrong? Yes, looking at the time stamp it seems like it even does so everytime it is launched. But it won't do any harm to double check ;) -- Philip Lehman [EMAIL PROTECTED]
Re: SCSI bus reset when burning
Have you added your burner to the SCSI bus, later? Then check, wether your SCSI bus is terminated correctly. The device at the end of the cable must be terminated, only. For some burners you have to set the jumper to disable termination. That is revers to normal harddrive setting.
Re: SCSI bus reset when burning
What do you mean added the burner to the SCSI bus later? You can't do that, can you? I mean, it has to be connected and on in order to be detected and used, doesn't it? The SCSI bus should be terminated correctly. the 50-pin connector is terminated by the DVD drive, and the UW chain (the HDs) has an active termintor on the end of the chain as the HDs do not terminate. I think I might have turned off the autotermination in the SCSI bios though. I suppose the external connector could not be terminated correctly (there's nothing connected externally) and that could be causing problems? I have disabled termination on the burner and use the dvd drive to terminate the chain. Rob Armin Wegner wrote: Have you added your burner to the SCSI bus, later? Then check, wether your SCSI bus is terminated correctly. The device at the end of the cable must be terminated, only. For some burners you have to set the jumper to disable termination. That is revers to normal harddrive setting. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- [EMAIL PROTECTED] 1999-00 | Aka Khyron the Backstabber | LI NN N U U X X O ICQ# 2325055| LI N NN U U X | LLL I N N UUU X X O Shackles cannot keep me bound | Those who can, do. forever. I'm outta here. |
Re: Simple Text Editor with Synatx highlighting?
On Tue, 23 May 2000, Armin Wegner [EMAIL PROTECTED] wrote: Use vim. It's hard to learn, but it is worse it. Interesting typo ;) (I'm writing this as a non-native speaker, no offence intended) -- Philip Lehman [EMAIL PROTECTED]
Re: xterm: Error 14, errno 13: Permission denied
On Mon, May 22, 2000 at 12:47:13PM -0400, Lee Bradshaw wrote: I've upgraded several systems from slink to potato using a mirror I made a few weeks ago. On some of the systems xterm works fine, but on others it generates the error message: xterm: Error 14, errno 13: Permission denied rxvt works fine and seems to have the same permissions as xterm: -rwxr-sr-x1 root utmp81616 Mar 18 12:40 /usr/X11R6/bin/rxvt-xterm* -rwxr-sr-x1 root utmp 161680 Mar 13 22:07 /usr/bin/X11/xterm* hmm just a wild guess but is /var/run/utmp and/or /var/log/wtmp writable by group utmp? I'm using xterm 3.3.6-6 which seems to be the latest available. I can't strace xterm, and I'm not sure what to look at without more information than I see in the error message. Anyone else have any ideas? you cannot strace a s[ug]id program, otherwise you could strace things like su and gain access to shadow passwords, among other nasty things (like run them through a debugger and make them start a shell instead) -- Ethan Benson http://www.alaska.net/~erbenson/ pgpTcVWVw1LQP.pgp Description: PGP signature
Re: arpwatch and the never Ending Syslog
On Wed, 2000-05-03 12:20:01 +0200, Andresito del Hierro wrote: Salut, After I installed arpwatch the syslog grows and grows and grows! then I looked to the init.d script and found that the ARGS option is set at by default. Would be better to have it set to -b by default?. The basic idea here is that normally you shouldn't see any bogons. Having -b the default is much like closing your eyes to make yourself believe that the problem doesn't exist in the first place. If you get a lot of bogons, something is broken with your network (in some cases is intentional, like in a test lab), but I guess it's not the majority of the cases. start-stop-daemon --stop --quiet --exec $DAEMON [...] start-stop-daemon --stop --quiet --exec $DAEMON -- $ARGS The way of implementing your idea is correct, but last time I checked start-stop-daemon it failed to stop a service started up such way. Fuji^ -- .+'''+. .+'''+. .+'''+. .+'''+. .+'' Kelemen Péter / \ / \ / [EMAIL PROTECTED] .+' `+...+' `+...+' `+...+' `+...+'
Re: unable to compile ss2 under Debian 2.2
I only tried it on my woody system, when I checked on potato system it didn't work... You could try downloading that woody part and install it using dpkg (this will only work if ssh2 doesn't depend on all kinds (version dependencies) of things, but you can try!). Ron Rademaker On Mon, 22 May 2000, Ray Olszewski wrote: At 12:39 AM 5/23/00 +0200, Ron Rademaker wrote: make?? try apt-get install ssh2, after that it should simply work. What archive are you connecting to? If I do (using potato) apt-cache search ssh, I get ssh ( == OpenSSH) and ssh-nonfree ( == SSH 1.2.27-6), and an assortment of support packages, but no ssh2. Never tell me the odds!--- Ray Olszewski-- Han Solo Palo Alto, CA [EMAIL PROTECTED]
Re: scsi disk question: u2w vs. uw
Sorry, but this is rubbish! The SCSI controller will have no effect on the disk rotational velocity. However this is not what the poster asked! If you put an Ultra 2 wide on a non wide channel the transfers will be eight bits at a time instead of 16, i.e. half the speed, but it will work fine. Some cards like the AHA2940UW have a wide and a narrow channel, if the Ultra wide disk is put on the UW channel and the Ultra disk is on the standard channel there will be no effect on performance. HTH JohnG 32865e97b5342e762ab140e00f3da23b - Just 'Debian' On Mon, 22 May 2000, Dan Hutchinson wrote: By default the SCSI card will slow the rpm to the slowest hard disk ie.. if you have one disk at 1rpm and one at 7200rpm both hard disks will be at 7200 rpm John F. Davis [EMAIL PROTECTED] wrote: Hello This is not a Debian linux question per se, but I know someone on this list will know for sure. Can you mix scsi disks on a Adaptec 2930u2 adapter and not have the slower disk slow down the faster one? I.e, I have a computer which currently has a u2w disk with a u2w card and I want to know if I will get a performance hit if I add a regular uw disk to the same scsi channel. The card does not have two channels, so if I add the second disk it has to be on the same channel as the original disk. JOhn -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null ___ To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax, all in one place - sign up today at http://www.zdnetonebox.com -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Simple Text Editor with Synatx highlighting?
On 23 May 2000, Philip Lehman wrote: On Tue, 23 May 2000, Armin Wegner [EMAIL PROTECTED] wrote: Use vim. It's hard to learn, but it is worse it. Interesting typo ;) (I'm writing this as a non-native speaker, no offence intended) -- Philip Lehman [EMAIL PROTECTED] Vim's one of the *best* editors, actually, IME. I use it all the time and it's replaced a word processor for me. I just print the files, piped through pr, for ordinary stuff; for anything fancy I use latex. And yes, it gives you syntax highlighting as well. Anthony -- Anthony Campbell - running Linux Debian 2.1 (Windows-free zone) Book Reviews: http://www.pentelikon.freeserve.co.uk/bookreviews/ Skeptical articles: http://www.freethinker/uklinux.net/ To be forced by desire into any unwarrantable belief is a calamity. I.A. Richards
Re: Sendmail Q
You mean the mail name? This is the thing what comes behind the @, eg. when I (username ron) send you mail you see it coming from [EMAIL PROTECTED], if I would change the mail name to abcdefghijklmnopqrstuvwxyz, you would see it coming from [EMAIL PROTECTED] However in that case if you would reply the mail wouldn't arrive! Do this name doesn't have to be your computername (in my case it isn't!). Ron Rademaker On Mon, 22 May 2000, Jay Kelly wrote: Hello Group, Im trying to setup sendmail and Im at the sendmailconfig and im confussed. I am being asked for: what is the visable mail name of your system. would this be my computer name? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: X Weirdness
Are you out of quota or out of diskspace?? What happens if you start X as root? Ron Rademaker On Tue, 23 May 2000, Andrew McRobert wrote: hi I've installed X 3.3.6-6 on my Toshiba Sat Pro 4270 (laptop). The machine has an S3 Savage card, and I've installed the latest drivers from the s3 site. The server is identifying my machine's video card correctly, and is not producing any errors on start up ... BUT ... all I get is a blank screen when I 'startx' ... the output from my X session is as follows: XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.12-20 i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct6, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, smi, generic (using VT number 7) XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: xfree86 (**) XKB: model: pc104 (**) XKB: layout: us (**) XKB: variant: nodeadkeys (**) Mouse: type: IMPS/2, device: /dev/psaux, samplerate: 60 (**) Mouse: buttons: 5 (**) Mouse: zaxismapping: (-)4 (+)5 (**) SVGA: Graphics device ID: S3 Savage IX/MV (**) SVGA: Monitor ID: Primary-Monitor (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unsca led,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1, /usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib /X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi (--) SVGA: PCI: S3 Savage/IX (Macrovision) rev 17, Memory @ 0xf000 (--) SVGA: SAVAGE: Savage/MX rev 11, Linear FB @ 0xf000 (--) SVGA: Detected S3 Savage/MX (--) SVGA: using driver for chipset s3_savage (--) SVGA: videoram: 8192k (--) SVGA: Ramdac speed: 250 MHz (--) SVGA: Detected current MCLK value of 83.045 MHz (--) SVGA: VBE Version 2.0 (--) SVGA: BIOS label is S3 Incorporated. M7 BIOS X connection to :0.0 broken (explicit kill or server shutdown). - Andrew McRobert LLB B.Sc(Comp. Sci) IT Officer, School of Law MURDOCH UNIVERSITY Ph: 9360 6479 Fax: 9310 6671 e-mail: [EMAIL PROTECTED] -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Dumb X Windows Question
Do you have: xfree a x-windows-manager xf86setup and many other things you'll probably want installed?? If you install x on a system where you don't have anything x on already, I would suggest you use dselect for it. Ron Rademaker On Mon, 22 May 2000, Jay Kelly wrote: Ok I have another dumb question. If I want to install X Windows what do I do. I have already tried apt-get install xserver-svga and it installs, but when I try to run the XF86Config I get command not found and I get the same for XF86Setup. What did I forget to install? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RFC - corel installation
Any body else ever had problems with corel installation? mine worked fine, my friend using the same cd has the hang problem that loads of people here have reported. As I can't find any commonality in whose works and whose doesn't, I'd like your story! Corel is nice, easy and mostly Debian - it'd be a shame if the answer to the problem was just the installer is crap - forget it. Obvious things like scsi controller, cpu, and board manufacturer are already ruled out. If we can find out, tell Corel and get it fixed, in a couple of years there'll be loads more debian users. cheers. dominic blythe -- I used to be an advocate of Anything But Microsoft until I discovered Debian GNU/Linux.
Re: Debian vs Red Hat??? I need info.
Previously Joey Hess wrote: http://www.debian.org/Lists-Archives/debian-dpkg-0004/msg2.html Okay, but that issue assumes that a package leaves a bomb in its prerm. There is no way to protect yourself from such trojan packages anyway, wether you use rpm or dpkg. Wichert. -- _ / Generally uninteresting signature - ignore at your convenience \ | [EMAIL PROTECTED]http://www.liacs.nl/~wichert/ | | 1024D/2FA3BC2D 576E 100B 518D 2F16 36B0 2805 3CB8 9250 2FA3 BC2D | pgp2wGo5enket.pgp Description: PGP signature
ArcServe Client for Linux
Has anybody tried to perform a backup of a Debian workstation using the ArcServe (CAI) client for Linux?. More specifically from a NT Server. If you did succeed please let me know the release and conditions. Thanks Carlos Bambo [EMAIL PROTECTED] ---
Re: finger
On Mon, May 22, 2000 at 02:00:11PM -0500, Lindsay Haisley wrote: I've replaced finger altogether for off-site finger requests with a nice little perl script guaranteed to confuse and amuse. Try fingering [EMAIL PROTECTED] Try it several times :) [fmp.com] User account '' has expired. Please contact [EMAIL PROTECTED] for renewal Tee hee Hi, I'd like to buy a university please. -- Matt Folwell, Trinity College, Cambridge. CB2 1TQ [EMAIL PROTECTED]
XFree86 4.0 debs ?
I would like to install XFree 4.0 on my potato machine, are there debs available yet, or not too far off ? I couldn't even see 4.0 ones in Woody. Thanks James Sleeman
Memoria reconocida por el sistema vs. memoria instalada
Hola: Tenemos un servidor con Debian que es un PC clonico, tiene instaladas 128 Mb de memoria RAM y la BIOS cuando arranca cuenta las 128 Mb. Sin embargo cuando hacemos un free -kt lo que obtenemos es: total used free sharedbufferscached Mem: 63528 62332 1196 49252 5736 34080 -/+ buffers/cache: 22516 41012 Swap: 66524 60 66364 Tota: 130052 6249267560 Suponemos que la memoria de swap se refiere a la partición de swap, con lo que parece que el sistema solo está reconociendo 64 Mb de las 128 Mb instaladas. En el libro The Debian Linux User's Guide en el Appendix 7 apartado Arguments leí lo siguiente (que reproduzco, con perdón): [...] mem= Since the BIOS of most PCs can only report 64 Megabytes there are times when the kernel needs to be told that there is more memory than this. This argument should be used with great care, since, if you lie to the kernel and tell it that it has more address space than it actually has, the system will crash miserably as some time in the near future. Also make sure that your system does not use the highest memory for caching the bios code, as use of this memory by the kernel will ultimately crash the system as well. The value given after the equal sign should be the highest ram address available to the kernel, so a 96 Megabyte system would get an argument like mem=0x600. [...] Por lo que entendí estos parametros se podian poner en el lilo.conf y tomarian efecto despues de ejecutar liloconfig y rearrancar el sistema, pero cuando pongo en lilo.conf mem=0x800 (valor hexadecimal de 128 Mb) y ejecuto liloconfig me aparece el error: Syntax error near line 7 in file /etc/lilo.conf Que es la linea donde he puesto lo de mem=... ¿Alguien sabe como puedo hacer que el sistema reconozca las 128 Mb?. Una posibilidad seria actualizar la BIOS del equipo pero me da miedo porque la placa es marca la guitarra y no se si la encontaré (si es que existe) asi que preferiria hacerlo con Debian (si se puede). Disculparme por este cacho mail. Espero vuestra ayuda. Saludos. -- Mecanizados, S. A. Informática. Ximo Nadal. Avda. Ausias March, 122. E-46026 VALENCIA (SPAIN). Tel.: +34 96 373 63 62. Fax: +34 96 373 66 03. E-mail: [EMAIL PROTECTED] -- Server powered by Debian GNU/Linux http://www.debian.org
RE: Memoria reconocida por el sistema vs. memoria instalada
translation - - Hola: Tenemos un servidor con Debian que es un PC clonico, tiene instaladas 128 Mb de memoria RAM y la BIOS cuando arranca cuenta las 128 Mb. Sin embargo cuando hacemos un free -kt lo que obtenemos es: on a pc with 128mb ram, this is the output from free -kt total used free sharedbufferscached Mem: 63528 62332 1196 49252 5736 34080 -/+ buffers/cache: 22516 41012 Swap: 66524 60 66364 Tota: 130052 6249267560 assuming that the Swap entry 66524 represents the swap partition, why can the pc only recognise 64MB of ram? Suponemos que la memoria de swap se refiere a la partición de swap, con lo que parece que el sistema solo está reconociendo 64 Mb de las 128 Mb instaladas. En el libro The Debian Linux User's Guide en el Appendix 7 apartado Arguments leí lo siguiente (que reproduzco, con perdón): [...] mem= Since the BIOS of most PCs can only report 64 Megabytes there are times when the kernel needs to be told that there is more memory than this. This argument should be used with great care, since, if you lie to the kernel and tell it that it has more address space than it actually has, the system will crash miserably as some time in the near future. Also make sure that your system does not use the highest memory for caching the bios code, as use of this memory by the kernel will ultimately crash the system as well. The value given after the equal sign should be the highest ram address available to the kernel, so a 96 Megabyte system would get an argument like mem=0x600. [...] having changed lilo.conf as directed with line mem=0x0800 (128MB as hex), i get Syntax error near line 7 in file /etc/lilo.conf line 7 is the mem=... line so how to get it to recognise 128MB ram? [i don't get the bit about the guitar - does he mean he doesn't want to flash his bios?] sorry this mail is so cacho Por lo que entendí estos parametros se podian poner en el lilo.conf y tomarian efecto despues de ejecutar liloconfig y rearrancar el sistema, pero cuando pongo en lilo.conf mem=0x800 (valor hexadecimal de 128 Mb) y ejecuto liloconfig me aparece el error: Syntax error near line 7 in file /etc/lilo.conf Que es la linea donde he puesto lo de mem=... ¿Alguien sabe como puedo hacer que el sistema reconozca las 128 Mb?. Una posibilidad seria actualizar la BIOS del equipo pero me da miedo porque la placa es marca la guitarra y no se si la encontaré (si es que existe) asi que preferiria hacerlo con Debian (si se puede). Disculparme por este cacho mail. Espero vuestra ayuda. Saludos. -- Mecanizados, S. A. Informática. Ximo Nadal. Avda. Ausias March, 122. E-46026 VALENCIA (SPAIN). Tel.: +34 96 373 63 62. Fax: +34 96 373 66 03. E-mail: [EMAIL PROTECTED] -- Server powered by Debian GNU/Linux http://www.debian.org -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: XFree86 4.0 debs ?
There aren't any deb (yet), but you can compile the sources yourself, works fine here! Ron Rademaker PS. Make sure to keep the old 3, just in case anything goes wrong, I didn't the first time, something went wrong, so I tried to fix it and messed up my system even more. At the end I decided to reinstall the system, because it was the fastest way of fixing ;) On Tue, 23 May 2000, James Sleeman wrote: I would like to install XFree 4.0 on my potato machine, are there debs available yet, or not too far off ? I couldn't even see 4.0 ones in Woody. Thanks James Sleeman -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: xterm: Error 14, errno 13: Permission denied
Unfortnately I deleted the email, but I believe Darren sent me a private email saying the permissions on /dev/tty were wrong. Anyway the permissions on /dev/tty were incorrect. On the non-working machines this device was owned by a user and was rw by him only. I changed the device to crw-rw-rw- root:tty and things are working correctly now. On Mon, May 22, 2000 at 12:47:13PM -0400, Lee Bradshaw wrote: I've upgraded several systems from slink to potato using a mirror I made a few weeks ago. On some of the systems xterm works fine, but on others it generates the error message: xterm: Error 14, errno 13: Permission denied rxvt works fine and seems to have the same permissions as xterm: -rwxr-sr-x1 root utmp81616 Mar 18 12:40 /usr/X11R6/bin/rxvt-xterm* -rwxr-sr-x1 root utmp 161680 Mar 13 22:07 /usr/bin/X11/xterm* I'm using xterm 3.3.6-6 which seems to be the latest available. I can't strace xterm, and I'm not sure what to look at without more information than I see in the error message. Anyone else have any ideas? -- Lee Bradshaw [EMAIL PROTECTED] (preferred) Alantro Communications [EMAIL PROTECTED]
Re: scsi disk question: u2w vs. uw
On Tue, May 23, 2000 at 11:05:42AM +0100, John Gould wrote: Sorry, but this is rubbish! Yep. The only thing that I had to add is that if you hang a UW device on the same chain as your U2W device, your U2W device will transfer at UW rates. (which is why I had to send back my plextor-40wide, dag nabbit. :) -Jonathan -- [EMAIL PROTECTED] GPG public key available from http://lupavista.jamdata.net/gpg.asc pgpSzM4fUtbQK.pgp Description: PGP signature
Thanks! - Re: (ot) What is load average?
On Mon, May 22, 2000 at 07:19:40PM -0700, kmself@ix.netcom.com wrote: You can find this information by grubbing about in /usr/src/linux/fs/proc/array.c excellent. Thanks for all the great answers! -Jonathan -- [EMAIL PROTECTED] GPG public key available from http://lupavista.jamdata.net/gpg.asc pgprqJ6slvF7b.pgp Description: PGP signature
Re: scsi disk question: u2w vs. uw
On Tue, 23 May 2000, John Gould wrote: Sorry, but this is rubbish! The SCSI controller will have no effect on the disk rotational velocity. However this is not what the poster asked! If you put an Ultra 2 wide on a non wide channel the transfers will be eight bits at a time instead of 16, i.e. half the speed, but it will work fine. Some cards like the AHA2940UW have a wide and a narrow channel, if the Ultra wide disk is put on the UW channel and the Ultra disk is on the standard channel there will be no effect on performance. HTH JohnG On a somewhat related note.. I have a 2940UW. Can I use a 50 pin Ultra2 drive on the 50 pin Narrow channel? I know I wouldn't get U2 speeds, but the 50 pin narrow channel is all I have to use. 68 pin UW is too expensive and hard to find these days. I can find 50 pin Ultra2 18 gig drives for pretty cheap. Thanks. Ian
Email forwarding
Has anyone on this list had experience with setting up email forwarding, like bigfoot and such services do. If so can you point me to some resources on this subject. Richard Nothing is interesting if you're not interested.-- Helen MacInness
Re: RFC - corel installation
Hi, Want to report I had a computer built to dual boot NT and Corel Linux. We gave each OS its own drive. In selecting components we reviewed Corel's list of supported hardware and selected only those listed, with the exception of a Matrox G400. We are both basically Windows folks. The install went extremely well. We have had some minor issues subsequently, which had already surfaced on Corel and OneList newsgroups, so we have had most of the solutions readily available. I will be having some networking issues, but hopefully these too can be solved. My guess is that for starters a complete, maintained ... up to date, hardware compatibility list would be invaluable. From there, I suspect that assuming the target group for the distro are currently primarily windows users and total newbies ... that having the OS and applications preinstalled would go a long way. Further, there is probably a need for information as a part of ads (to point out the improved stability, the built in enhanced security and the reduced risk of attack by computer virus's) in addition to the beneficial pricing. There is also a need for identifiable sources of training (courses, books, videos) and local support. IMHO Linux is a far better OS and the motivations of the people developing and offering it are sterling, particularly as compared to the currently pervasive alternative. Jean
Re: scsi disk question: u2w vs. uw
Sorry, I misspoke, I meant the data rate not the spin of the hard disk. Dan Nathan E Norman [EMAIL PROTECTED] wrote: [Non text/plain message body suppressed] ___ To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax, all in one place - sign up today at http://www.zdnetonebox.com
Re: Webmail
-BEGIN PGP SIGNED MESSAGE- Check out the following URLs, they might be helpful. I know that at least one of these packages has been Debianized. http://webmail.wastl.net/ http://webbasedemail.com/ http://www.horde.org/imp/ HTH, noah On Tue, 23 May 2000, Andrew McRobert wrote: hi while I'm waiting in hope re: my X Win qstn, does anyone know of a good Web mail package (ie. let's you download mail from another POP server look @ it through WWW. PGP Public Key available at http://web.morgul.net/~frodo/mail.html or by `finger -l [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: 2.6.3a Charset: noconv iQCVAwUBOSqE7odCcpBjGWoFAQFGOwP/ZxXkvf00oQPa9/pxpg+mRcKv40SFbbGa kmQq/ypO95WVxPOy17ADCwT4eGa922awehY3nJeHtfp7WmiJFEa931ZzQdu+G87x QaEvqu0FbfQXuuq8O3z0K1R2qkWkpv8lhMZMPee/cYQ/4bdfD30QvwxlFh2G/soq Re2Y1Q9/eL0= =QxhE -END PGP SIGNATURE-
OT. Debian w/s in schools - info needed.
I'm a very inexpert sysadmin who assists at a local school. We have a Debian box now for mail, squid, modem server and so on and they are very receptive to the idea of running Linux workstations and eventually breaking away from you-know-who. Possibilities: Booting Debian from the server. Home DIRs on a Debian/Samba box. Home DIRs on a straight Debian box. Using NFS mounted applications. (Star Office etc.) Using X in lieu of NFS and running things on the server. All this is way outside my experience so I really could use some help. Can anyone give me some URLs for information on how to set things up, or people to talk to? Lindsay -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Lindsay Allen [EMAIL PROTECTED] Perth, Western Australia voice +61 8 9316 248632.0125S 115.8445E Debian Linux =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Re: Simple Text Editor with Synatx highlighting?
Richard Klinda wrote: Hoi Frank, ALL! Frank I'm using joe for many purposes. The only feature I miss is Frank syntax highlighting in C. Are there any hints for such a Frank small and fast editor in Debian with that feature built in? fte, vim, jed (emacs ;-)) This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting?
Re: Dumb X Windows Question
The XF86Setup app used to be in the xserver-vga16 package, I believe, but now it is in the xf86setup package. Do an apt-get install xf86setup, then run XF86Setup. That should get you going. ktb wrote: XF86Setup is the program you want to run to set up 'X' which creates XF86Config. Have you tried running XF86Setup as root? Do you have 'xbase' installed? Have you verified XF86Setup exists on your system? Just some things I would look for. hth, kent Jay Kelly wrote: Ok I have another dumb question. If I want to install X Windows what do I do. I have already tried apt-get install xserver-svga and it installs, but when I try to run the XF86Config I get command not found and I get the same for XF86Setup. What did I forget to install? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Simple Text Editor with Synatx highlighting?
I may get flamed for this lol, but i've always used mcedit for perl stuff, pretty perl colour highlighting :) Peter. Keith G. Murphy wrote: Richard Klinda wrote: Hoi Frank, ALL! Frank I'm using joe for many purposes. The only feature I miss is Frank syntax highlighting in C. Are there any hints for such a Frank small and fast editor in Debian with that feature built in? fte, vim, jed (emacs ;-)) This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- In the beginning, the universe was created. This made a lot of people very angry, and has been widely regarded as a bad idea. *** *Peter GoodEmail: [EMAIL PROTECTED] *Pete's Internet Services Sales: [EMAIL PROTECTED] * *http://www.petesinternet.net Phone: 0401 283 482* *Morayfield QLD Australia * ***
Re: Simple Text Editor with Synatx highlighting?
on 5/23/00 9:57 AM, Keith G. Murphy at [EMAIL PROTECTED] wrote: This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting? (X)Emacs with CPerl mode. john. -- [ John S Jacobs Anderson ]--URL:mailto:[EMAIL PROTECTED] [ Genehack: Not your daddy's weblog ]--URL:http://genehack.org
RE: Memoria reconocida por el sistema vs. memoria instalada
I think you would need: append=mem=0x800 I personally use: append=mem=128M Point is quotes and so forth are important :) Cheers, Corey Popelier http://members.dingoblue.net.au/~pancreas Work Email: [EMAIL PROTECTED] On Tue, 23 May 2000, Dominic Blythe wrote: translation - - Hola: Tenemos un servidor con Debian que es un PC clonico, tiene instaladas 128 Mb de memoria RAM y la BIOS cuando arranca cuenta las 128 Mb. Sin embargo cuando hacemos un free -kt lo que obtenemos es: on a pc with 128mb ram, this is the output from free -kt total used free sharedbufferscached Mem: 63528 62332 1196 49252 5736 34080 -/+ buffers/cache: 22516 41012 Swap: 66524 60 66364 Tota: 130052 6249267560 assuming that the Swap entry 66524 represents the swap partition, why can the pc only recognise 64MB of ram? Suponemos que la memoria de swap se refiere a la partici?n de swap, con lo que parece que el sistema solo est? reconociendo 64 Mb de las 128 Mb instaladas. En el libro The Debian Linux User's Guide en el Appendix 7 apartado Arguments le? lo siguiente (que reproduzco, con perd?n): [...] mem= Since the BIOS of most PCs can only report 64 Megabytes there are times when the kernel needs to be told that there is more memory than this. This argument should be used with great care, since, if you lie to the kernel and tell it that it has more address space than it actually has, the system will crash miserably as some time in the near future. Also make sure that your system does not use the highest memory for caching the bios code, as use of this memory by the kernel will ultimately crash the system as well. The value given after the equal sign should be the highest ram address available to the kernel, so a 96 Megabyte system would get an argument like mem=0x600. [...] having changed lilo.conf as directed with line mem=0x0800 (128MB as hex), i get Syntax error near line 7 in file /etc/lilo.conf line 7 is the mem=... line so how to get it to recognise 128MB ram? [i don't get the bit about the guitar - does he mean he doesn't want to flash his bios?] sorry this mail is so cacho Por lo que entend? estos parametros se podian poner en el lilo.conf y tomarian efecto despues de ejecutar liloconfig y rearrancar el sistema, pero cuando pongo en lilo.conf mem=0x800 (valor hexadecimal de 128 Mb) y ejecuto liloconfig me aparece el error: Syntax error near line 7 in file /etc/lilo.conf Que es la linea donde he puesto lo de mem=... ?Alguien sabe como puedo hacer que el sistema reconozca las 128 Mb?. Una posibilidad seria actualizar la BIOS del equipo pero me da miedo porque la placa es marca la guitarra y no se si la encontar? (si es que existe) asi que preferiria hacerlo con Debian (si se puede). Disculparme por este cacho mail. Espero vuestra ayuda. Saludos. -- Mecanizados, S. A. Inform?tica. Ximo Nadal. Avda. Ausias March, 122. E-46026 VALENCIA (SPAIN). Tel.: +34 96 373 63 62. Fax: +34 96 373 66 03. E-mail: [EMAIL PROTECTED] -- Server powered by Debian GNU/Linux http://www.debian.org -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Memoria reconocida por el sistema vs. memoria instalada
On Tue, May 23, 2000 at 01:21:46PM +0200, Ximo Nadal wrote: Por lo que entendí estos parametros se podian poner en el lilo.conf y tomarian efecto despues de ejecutar liloconfig y rearrancar el sistema, pero cuando pongo en lilo.conf mem=0x800 You should use the line: append=mem=128M Sorry, I don't speak Spanish. -- Matt Folwell, Trinity College, Cambridge. CB2 1TQ [EMAIL PROTECTED]
Re: Webmail
One free one is qdpop, but they are discontinuing it. http://www-informatics.ucdmc.ucdavis.edu/qdpop/hosting.htm Others include: http://www.endymion.com/products/mailman/ http://www.atdot.org/faq.shtml http://www.rts.com.au/warp/warpmail/ Of course there are many free externally hosted www-mail services, hotmail etc... There are several very nice $ commercial ones, but I presume you don't want them! Best, Gregory At 02:59 PM 05/23/2000 +0800, Andrew McRobert wrote: hi while I'm waiting in hope re: my X Win qstn, does anyone know of a good Web mail package (ie. let's you download mail from another POP server look @ it through WWW. Gregory Guthrie [EMAIL PROTECTED] (515)472-1125Fax: -1103
Re: POP3 port
I think it's 995, try that. That's what it's got in my /etc/services anyway. Cheers, Sath On Mon, 22 May 2000, Viktor Rosenfeld wrote: Hi folks, I've trouble finding out, what port a POP3 server normally listens to. I tried 25, but that's SMTP (sendmail). And a look at the fetchmail man page didn't help me either. MfG Viktor -- Viktor Rosenfeld E-Mail: mailto:[EMAIL PROTECTED] HertzSCHLAG: http://www.informatik.hu-berlin.de/~rosenfel/hs/ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Simple Text Editor with Synatx highlighting?
On 05/23/00, John S Jacobs Anderson addressed Re: Simple Text Editor with Synatx highlighting?: on 5/23/00 9:57 AM, Keith G. Murphy at [EMAIL PROTECTED] wrote: This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting? (X)Emacs with CPerl mode. Even that's not, hmmm, what it should be. Cases that come to mind are certain regular expressions and here documents. Unless I've been using a different Perl mode in Emacs. Jesse -- Jesse Jacobsen, Pastor[EMAIL PROTECTED], [EMAIL PROTECTED] Grace Lutheran Church (ELS) http://members.home.net/jmjacobsen1/glc/ Madison, WisconsinGnuPG public key ID: 2E3EBF13
Re: Simple Text Editor with Synatx highlighting?
How about fte (fte-console or fte under x)?? Ron Rademaker On Tue, 23 May 2000, Jesse Jacobsen wrote: On 05/23/00, John S Jacobs Anderson addressed Re: Simple Text Editor with Synatx highlighting?: on 5/23/00 9:57 AM, Keith G. Murphy at [EMAIL PROTECTED] wrote: This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting? (X)Emacs with CPerl mode. Even that's not, hmmm, what it should be. Cases that come to mind are certain regular expressions and here documents. Unless I've been using a different Perl mode in Emacs. Jesse -- Jesse Jacobsen, Pastor[EMAIL PROTECTED], [EMAIL PROTECTED] Grace Lutheran Church (ELS) http://members.home.net/jmjacobsen1/glc/ Madison, WisconsinGnuPG public key ID: 2E3EBF13 -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Mouse doesn't work in Xwindow, NFS, bug(3.)???
I have the same problems on my computer For nfs: uninstall everything using nfs For gpm: Change your gpm.conf to device=/dev/psaux responsiveness= repeat_type= type=ps2 append= Francois
apache on debian frozen!
hello group i use the htpasswd from apache for my squid password list with ncsa_auth authentication ! my password is 9 characters long but if i typed only 8 it is ssuccessful ! is this a bug or can squid only handle 8 characters? -- cu thomas PGP DSS Key fingerprint = B4 9F 55 F6 D4 5D 0F 31 95 8E E0 8C 1E 9F 49 E1 23 5D 8C 3D # # # Linux is like a Wigwam: Thomas Braun# # No Gates, no Fences and Hammer GmbH Co. KG# # an Apache inside ! :-) Charlottenburger Allee 33 # # --- 52068 Aachen# # Tel: +49(0)241-9665-188 # # Fax: +49(0)241-9665-189 #
Re: Simple Text Editor with Synatx highlighting?
On Tue, May 23, 2000 at 09:39:16AM -0500, Jesse Jacobsen wrote: On 05/23/00, John S Jacobs Anderson addressed Re: Simple Text Editor with Synatx highlighting?: on 5/23/00 9:57 AM, Keith G. Murphy at [EMAIL PROTECTED] wrote: This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting? (X)Emacs with CPerl mode. Even that's not, hmmm, what it should be. Cases that come to mind are certain regular expressions and here documents. Unless I've been using a different Perl mode in Emacs. It's possible. There's perl-mode and there's cperl-mode. I prefer that latter, although the highlighting is not perfect. -Michael -- Michael Stenner Office Phone: 919-660-2513 Duke University, Dept. of Physics [EMAIL PROTECTED] Box 90305, Durham N.C. 27708-0305
Re: POP3 port
He's probably looking for port 110. 995 appears to be an encrypted version. Interesting... now I'm wondering how to set this up (the ssl version, that is). Time for me to do some reading. -Dan [EMAIL PROTECTED]:[~]$ grep pop3 /etc/services pop3110/tcp pop-3 # POP version 3 pop3110/udp pop-3 pop3s 995/tcp # POP-3 over SSL pop3s 995/udp # POP-3 over SSL On Tue, May 23, 2000 at 03:31:59PM +0100, Sathpal Singh wrote: I think it's 995, try that. That's what it's got in my /etc/services anyway. Cheers, Sath On Mon, 22 May 2000, Viktor Rosenfeld wrote: Hi folks, I've trouble finding out, what port a POP3 server normally listens to. I tried 25, but that's SMTP (sendmail). And a look at the fetchmail man page didn't help me either. MfG Viktor -- Viktor Rosenfeld E-Mail: mailto:[EMAIL PROTECTED] HertzSCHLAG:http://www.informatik.hu-berlin.de/~rosenfel/hs/ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- ... the most serious problems in the Internet have been caused by unenvisaged mechanisms triggered by low-probability events; mere human malice would never have taken so devious a course! - RFC 1122 pgp2jgDlqaO2z.pgp Description: PGP signature
ip accounting
Hi, I have a Cisco1600 router connecting to an ISP. I would like to count the network traffic of this router, but not like the way of mrtg does, because I want to know all downloaded or uploaded MBs on all IP addresses in my C class using this router in a time period (for example in a month). Has anyone a great idea about coping with this problem? Thanks, Mihaly Litzler
RE: SCSI bus reset when burning
I have this same type of problem when I try to use SCSI tape backup. I get simular error messages and the machine's load goes pretty high and sometimes needs to be rebooted. I have had no luck getting the tape backup to work. this is the error i get: -- May 3 14:23:23 taz kernel: SCSI host 0 abort (pid 228089503) timed out - resetting May 3 14:23:23 taz kernel: SCSI bus is being reset for host 0 channel 0. -- We both have Adaptech controllers... -- scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4 Adaptec AIC-7880 Ultra SCSI host adapter scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4 Adaptec AIC-7860 Ultra SCSI host adapter scsi2 : AMI MegaRAID U.75 254 commands 16 targs 2 chans scsi : 3 hosts. -- -Original Message- From: Rob Rati [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 23, 2000 4:15 AM To: [EMAIL PROTECTED] Cc: 'debian-user@lists.debian.org' Subject: Re: SCSI bus reset when burning Here's what dmesg says about my scsi chain. I have 2 hds, 1 dvd drive, and a burner on it. The burner works great when I mount it as a cd-rom drive. No apparant problems at all. The SCSI card is on ID 7, but the ID of the device shouldn't matter should it? As long as it's not the same ID as another device on the chain. None of the other devices have any problems, just the burner causes the SCSI bus to reset. (scsi0) Adaptec AHA-294X Ultra SCSI host adapter found at PCI 0/10/0 (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs (scsi0) Downloading sequencer code... 423 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.28/3.2.4 Adaptec AHA-294X Ultra SCSI host adapter scsi : 1 host. (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. Vendor: YAMAHAModel: CRW6416S Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 (scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 8. Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 (scsi0:0:3:0) Synchronous at 40.0 Mbyte/sec, offset 8. Vendor: COMPAQModel: 3391SSRev: C70E Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 3, lun 0 (scsi0:0:4:0) Synchronous at 40.0 Mbyte/sec, offset 8. Vendor: COMPAQModel: 3391SSRev: C424 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0 scsi : detected 2 SCSI cdroms 2 SCSI disks total. sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.07 sr1: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB] Rob C. Falconer wrote: Does your SCSI drive work if you try to mount it like a CDROM ? Do you have any other SCSI devices (hard drive/another CD etc) Have you considered setting the scsi ID to something like 2 through 5? the card is often ID6. Can you please post the dmesg lines from boot that show what scsi devices are detected? -- From: Rob Rati[SMTP:[EMAIL PROTECTED] Reply To: [EMAIL PROTECTED] Sent: Tuesday, 23 May 2000 5:23 PM To: debian-user@lists.debian.org Subject:SCSI bus reset when burning My scsi bus appears to want to reset everytime I try to burn a CD. My dmesg log gets errors like this: scsi : aborting command due to timeout : pid 232511, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 2f e0 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 236020, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 1f 30 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. scsi : aborting command due to timeout : pid 237829, scsi0, channel 0, id 0, lun 0 0x2a 00 00 00 08 40 00 00 10 00 (scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15. Scsi id 0 is my burner, so it appears to be having some kind of problem. Does anyone know how to solve this or why the scsi bus wants to reset? Any help would be appreciated since I can't burn CDs until this is figured out. TIA. Rob -- [EMAIL PROTECTED] 1999-00 | Aka Khyron the Backstabber | LI NN N U U X X O ICQ# 2325055| LI N NN U U X | LLL I N N UUU X X O Shackles cannot keep me bound | Those who can, do. forever. I'm outta here. | -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe
Adaptec SCSI controller
I just picked up a cheap Adaptec AHA-1520B ISA SCSI controller. Do I stand a chance of getting it working with my system (currently upgraded to 'frozen')? If so, which SCSI driver (kernel module, whatever) should I be using? I haven't managed to get it to do anything so far; it'd be nice to know that I'm attempting something that's possible. Thanks. -- Mark
Re: ip accounting
On Tue, May 23, 2000 at 04:59:59PM +0200, Litzler Mihaly wrote: Hi, I have a Cisco1600 router connecting to an ISP. I would like to count the network traffic of this router, but not like the way of mrtg does, because I want to know all downloaded or uploaded MBs on all IP addresses in my C class using this router in a time period (for example in a month). Has anyone a great idea about coping with this problem? Isn't that going to be the amount of traffic passing through your local interface? -- Nathan Norman Eschew Obfuscation Network Engineer GPG Key ID 1024D/51F98BB7http://home.midco.net/~nnorman/ Key fingerprint = C5F4 A147 416C E0BF AB73 8BEF F0C8 255C 51F9 8BB7 pgpOrnCuDWukC.pgp Description: PGP signature
Re[2]: Simple Text Editor with Synatx highlighting?
Tuesday, May 23, 2000, 6:57:22 AM, Keith wrote: This leads to a question I've been interested in. I've noticed vim's Perl syntax highlighting to be, hmmm, not always what it should be. (As some have said, only perl can parse Perl). Any opinions on which editor has the *best* Perl syntax highlighting? Vim. I've not seen a problem with its highlighting that didn't also improve the readability of my code when I got in the habit of getting it to colorize right. The /only/ perl construct I know of that doesn't work is something like this: if ($foo =~ /bar\/blam/){ } Vim would see the \/, see a / and mess up the colorization right there. However, this fixes it: if ($foo =~ m/bar\/blam/){ } Adding the m works fine. To me, explicitly stating a match is no big deal for me. If course, I also use parens like a zealot but bouncing on the % key is so much fun. foreach $file (sort(keys(%files))){ } :) One downside of vim that I just remembered, be careful the need for slamming the ESC key. Windows likes to think it means shut this window NOW! and if you have the confirmation turned off you lose messages in your Windows email client. Normally I don't wack the ESC key unless I am doing code. See above. ;) -- Steve C. Lamb | I'm your priest, I'm your shrink, I'm your ICQ: 5107343 | main connection to the switchboard of souls. ---+-
Re[2]: Simple Text Editor with Synatx highlighting?
Tuesday, May 23, 2000, 7:39:16 AM, Jesse wrote: (X)Emacs with CPerl mode. Even that's not, hmmm, what it should be. Cases that come to mind are certain regular expressions and here documents. Unless I've been using a different Perl mode in Emacs. Not to mention I fail to see how Emacs got into the discussion of Simple Text Editor... Lisp interpreters with dillusions of OShood doesn't meet any of those three words. -- Steve C. Lamb | I'm your priest, I'm your shrink, I'm your ICQ: 5107343 | main connection to the switchboard of souls. ---+-
Re: dhcp
dhcp-client is indeed the package you want. Post the error messages you get during install. In order to run a gateway for your external interface you'll want to set up IP Masquerading and then have all your other boxes point to your linux box as their default gateway. In order to get IP Masq. going you'll need to get your kernel loading the masq. modules and then configure the masquerading using ipfwadm or ipchains depending on your kernel. Please look at the IP Masquerading HOWTO for details: http://www.linux.org/help/ldp/howto/IP-Masquerade-HOWTO.html John Plummer wrote: Hi, Sorry to bother you with another newbie question but hours searching man, info, HOWTO's and FAQ's wasn't too revealing. I have a PC with both a Netgear and a 3Com Etherlink II nic cards. The Netgear is attached to a cablemodem and uses DHCP. The 3Com is fixed IP for the internal LAN. Both work under NT but I'm trying to switch to Debian. Loaded ver. 2.1 from the CD with dselect settings stable main contrib. Added the 3Com during installation and later using modconf added a tulip module for the Netgear. This was implied from an email thread about the Netgear NIC. The problem is first how to get DHCP up and running so as not to have to switch back to the dark side to browse and do email. Running dpkg --list 'dhcp*' listed a few dhcp entries, e.g. dhcp, dhcp-client, dhcp-beta, dhcpd, etc. But both apt-get install dhcp-client and using dselect (probably incorrectly) erred out. Can anyone point me to some docs on doing this? The second needed HOWTO would be setting up the gateway for the LAN through the 3Com. At this point, even being pointed to the appropriate info, man or HOWTO would be appreciated. First brush with OS has been impressive. Brings back the feeling of potential felt when discovering Sun's OS with Openwindows years ago. Except this time the pieces are there and affordable. jcp -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Jens B. Jorgensen [EMAIL PROTECTED]
Text editor with good Perl syntax highlighting (was Re: Re[2]: Simple Text Editor with Synatx highlighting?)
on 5/23/00 11:28 AM, Steve Lamb at [EMAIL PROTECTED] wrote: Not to mention I fail to see how Emacs got into the discussion of Simple Text Editor... Lisp interpreters with dillusions of OShood doesn't meet any of those three words. Go back and read the text you snipped. The question got changed to text editor with best Perl syntax highlighting, without a concomitant change in subject line. (X)Emacs certainly qualifies, despite it's editing functions being only a subset of it's full functionality. That said, could we pretty please with sugared bits on it not have this flame fest again? john. -- [ John S Jacobs Anderson ]--URL:mailto:[EMAIL PROTECTED] [ Genehack: Not your daddy's weblog ]--URL:http://genehack.org
Perl syntax highlighting in (X)Emacs (was Re: Simple Text Editor with Synatx highlighting?)
(X)Emacs with CPerl mode. Even that's not, hmmm, what it should be. Cases that come to mind are certain regular expressions and here documents. Unless I've been using a different Perl mode in Emacs. I haven't noticed any issues, but I don't make huge usage of here documents, and I tend towards non-standard bracketing for regexps, which means I do explict 'm's for matching. Those two factors might explain why I think it's satisfactory. OTOH, IIRC, there is a setting for how 'robust' the syntax parser tries to be; it's a time/speed tradeoff. I _think_ the default may be less than completely stringent. If you're really interested, M-x customize RET cperl-mode should tell all, at least in XEmacs. john. -- [ John S Jacobs Anderson ]--URL:mailto:[EMAIL PROTECTED] [ Genehack: Not your daddy's weblog ]--URL:http://genehack.org
Re: Adaptec SCSI controller
In the kernel is a driver for the aha 152x, so it should work. In other words you stand a chance and it is possible! Ron Rademaker On Tue, 23 May 2000, Mark Carroll wrote: I just picked up a cheap Adaptec AHA-1520B ISA SCSI controller. Do I stand a chance of getting it working with my system (currently upgraded to 'frozen')? If so, which SCSI driver (kernel module, whatever) should I be using? I haven't managed to get it to do anything so far; it'd be nice to know that I'm attempting something that's possible. Thanks. -- Mark -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: scsi disk question: u2w vs. uw
Yes, I believe you can. You can set the transfer speed in the setup of the AHA2940 card from CNTRL-A at boot up. You can also use SCA drives with either UW or U2W, if you can obtain these. They have 80 pins and need external termination and ID setting, but there is an adaptor that you can buy for around 12 pounds (sterling) that allows connection at either 50 pin or 68 pin. It also allows you to set the ID. Also see 'http://ask.adaptec.com/cgi-bin/tic/faq' This is what Adaptec say about the different types of drives:- What's the difference between SCSI-1, SCSI-2, Fast, Wide,Ultra Wide, and Ultra2? (Article #990426-0019) Description: What is the difference between SCSI-1, SCSI-2, Fast, Wide, Ultra Wide, and Ultra2? This information applies to the following product(s): - 1505 series, 1510 series, 1515, 1520 series, 1530p, 1540 series, 2902, 2906 series, 2910 series, 2920 series, 2930 series, 2940 series, 3940 series, 2940U2W series, 2930U2 series, 3950U2 series This information applies to the following Operating System(s): - All/PC, Mac OS Solution: The primary difference is in the command set used in the SCSI standard and the bandwidth, or maximum available speed of the devices. SCSI-1 5MB/Sec 8 bit SCSI bus SCSI-2 5MB/Sec 8 bit SCSI bus SCSI-2 Fast 10MB/Sec 8 bit SCSI bus SCSI-2 Fast Wide 20MB/Sec 16 bit SCSI bus SCSI Ultra 20MB/Sec 8 bit SCSI bus SCSI Ultra Wide 40MB/Sec 16 bit SCSI bus Ultra2 Wide 80MB/sec 16 bit SCSI bus Ultra2 speeds are available only when a Ultra2 host adapter is connected to Low Voltage Differential (LVD) devices on the LVD/SE port. If a single-ended (SE) wide or narrow SCSI-2 device is connected to the LVD/SE port, the performance for all devices reverts to SCSI Ultra. HTH JohnG 32865e97b5342e762ab140e00f3da23b - Just 'Debian' On Tue, 23 May 2000 [EMAIL PROTECTED] wrote: On Tue, 23 May 2000, John Gould wrote: Sorry, but this is rubbish! The SCSI controller will have no effect on the disk rotational velocity. However this is not what the poster asked! If you put an Ultra 2 wide on a non wide channel the transfers will be eight bits at a time instead of 16, i.e. half the speed, but it will work fine. Some cards like the AHA2940UW have a wide and a narrow channel, if the Ultra wide disk is put on the UW channel and the Ultra disk is on the standard channel there will be no effect on performance. HTH JohnG On a somewhat related note.. I have a 2940UW. Can I use a 50 pin Ultra2 drive on the 50 pin Narrow channel? I know I wouldn't get U2 speeds, but the 50 pin narrow channel is all I have to use. 68 pin UW is too expensive and hard to find these days. I can find 50 pin Ultra2 18 gig drives for pretty cheap. Thanks. Ian -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
dselect error (sorry for the repeat)
I'm sorry for posting this question as I know it has been asked recently, but I can't find it in the archives or my inbox. I just tried to install a few packages using dselect. dselect is set up to grab the packages off a cd. As far as I know I've done nothing differently, however, I when I hit Install, my CDROM spins up and then dselect gives me the message: internal error - no filename at -e line 12, P chunk 15. installation script returned error exit status 1. Press RETURN to continue. Does any one know what my problem would be?