Re: HP Deskjet 1050A All-in-One Printer not found

[Sharon Kimble]

Brian wrote:

 On Mon 22 Jul 2013 at 18:39:35 +0100, Sharon Kimble wrote:
 
  I also have a HP Deskjet 1050A All-in-One Printer which is NOT seen by
 lsusb. what can i do to make it be seen please? hp say it is
 debian-compatible. it is not shown in lsusb as -
 
 Switch it off and leave it for a while - it might be sulking. Remove the
 HP Deskjet 1000, switch on the 1050A and connect it to the same USB port
 as the Deskjet used, using the same cable of course.
 
 Post the outputs of
 
lpinfo -l -v | grep usb
 
 and
 
lpinfo -v
 
 I've run 'hp-setup -i' as root and it fails to find any device at all for
 a printer.
 
 How can it if the device is not registered on the USB bus?

Brian.
I've got google access problems atm, hopefully I can get access to the list 
through knode. I'll know more this afternoon, meanwhile I'll swap the 
printers over.

Thanks
Sharon.


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/ksod7t$t61$1...@ger.gmane.org

Re: HP Deskjet 1050A All-in-One Printer not found

[Brian]

On Mon 22 Jul 2013 at 18:39:35 +0100, Sharon Kimble wrote:

  I also have a HP Deskjet 1050A All-in-One Printer which is NOT seen by
 lsusb. what can i do to make it be seen please? hp say it is
 debian-compatible. it is not shown in lsusb as -

Switch it off and leave it for a while - it might be sulking. Remove the
HP Deskjet 1000, switch on the 1050A and connect it to the same USB port
as the Deskjet used, using the same cable of course.

Post the outputs of

   lpinfo -l -v | grep usb

and

   lpinfo -v

 I've run 'hp-setup -i' as root and it fails to find any device at all for a
 printer.

How can it if the device is not registered on the USB bus?


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/22072013200710.3baa22c51...@desktop.copernicus.demon.co.uk

Re: hp deskjet 2050 scanner not working

[Scott Ferguson]

On 26/09/10 01:00, Jozsef Vadkan wrote:
 I bought a $subject all-in-one printer/scanner.

Hopefully you won't make that mistake again - IMHO all-in-one does
nothing-very-well... :-(

 
 i just want to use the scanner. why doest kooka, xsane recognize it?
 what steps do i need, to bring it to life? or is its not supported
 yet?
 
/snip

As noted by others:-
Scan is not supported for HP Deskjet 2050 J510 series
quoting from http://hplipopensource.com/node/342

But before you give up on support under Linux you might try emailing the
Vuescan (commercial scanning program) developer - I've found him to be
very helpful. (Vuescan works very well)
http://www.hamrick.com/sup.html

Best of luck


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4c9f19b3.20...@gmail.com

Re: hp deskjet 2050 scanner not working

[Camaleón]

On Sat, 25 Sep 2010 17:00:50 +0200, Jozsef Vadkan wrote:

 I bought a $subject all-in-one printer/scanner.
 
 i just want to use the scanner. why doest kooka, xsane recognize it?
 what steps do i need, to bring it to life? or is its not supported yet?

It seems to be unsupported, at least with HPLIP ;-(

https://answers.launchpad.net/hplip/+question/117008
http://hplipopensource.com/hplip-web/models/deskjet/deskjet_2050_j510_series.html

Greetings,

-- 
Camaleón


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/pan.2010.09.25.15.17...@gmail.com

Re: hp deskjet 2050 scanner not working

[Jozsef Vadkan]

so i have to install a windows xp in virtualbox? :D my god.. :D:P

On 25 September 2010 17:17, Camaleón noela...@gmail.com wrote:
 On Sat, 25 Sep 2010 17:00:50 +0200, Jozsef Vadkan wrote:

 I bought a $subject all-in-one printer/scanner.

 i just want to use the scanner. why doest kooka, xsane recognize it?
 what steps do i need, to bring it to life? or is its not supported yet?

 It seems to be unsupported, at least with HPLIP ;-(

 https://answers.launchpad.net/hplip/+question/117008
 http://hplipopensource.com/hplip-web/models/deskjet/deskjet_2050_j510_series.html

 Greetings,

 --
 Camaleón


 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
 Archive: http://lists.debian.org/pan.2010.09.25.15.17...@gmail.com




--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/aanlktikfy6z2q5x4zp1u0smkin0mdz7mrckxe9gqo...@mail.gmail.com

Re: hp deskjet 2050 scanner not working

[Sjoerd Hiemstra]

Jozsef Vadkan wrote:
 I bought a $subject all-in-one printer/scanner.
 
 i just want to use the scanner. why doest kooka, xsane recognize it?

Before buying a scanner, you should have checked whether it is
supported, at www.sane-project.org/lists/sane-mfgs-cvs.html

BTW, I guess you mean 'Scanjet' instead of 'Deskjet'?


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100925193336.6d2688a7.shiems...@kpnplanet.nl

Re: hp deskjet 2050 scanner not working

[Camaleón]

On Sat, 25 Sep 2010 17:45:18 +0200, Jozsef Vadkan wrote:

 On 25 September 2010 17:17, Camaleón wrote:
 On Sat, 25 Sep 2010 17:00:50 +0200, Jozsef Vadkan wrote:

 I bought a $subject all-in-one printer/scanner.

 i just want to use the scanner. why doest kooka, xsane recognize it?
 what steps do i need, to bring it to life? or is its not supported
 yet?

 It seems to be unsupported, at least with HPLIP ;-(

 https://answers.launchpad.net/hplip/+question/117008
 http://hplipopensource.com/hplip-web/models/deskjet/
deskjet_2050_j510_series.html

 so i have to install a windows xp in virtualbox? :D my god.. :D:P

At least at this right moment, I'd say yes :-(

But as per the above links (the first one), it's like HPLIP could be 
adding scanner capabilty in a future release :-)

Greetings,

-- 
Camaleón


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/pan.2010.09.25.17.30...@gmail.com

Re: hp deskjet 2050 scanner not working

[Jozsef Vadkan]

the problem is that i installed a windows xp on virtualbox, and it
recognizes [devmgmt.msc] the 2050...but it doesn't scan :D omg..

On 25 September 2010 19:30, Camaleón noela...@gmail.com wrote:
 On Sat, 25 Sep 2010 17:45:18 +0200, Jozsef Vadkan wrote:

 On 25 September 2010 17:17, Camaleón wrote:
 On Sat, 25 Sep 2010 17:00:50 +0200, Jozsef Vadkan wrote:

 I bought a $subject all-in-one printer/scanner.

 i just want to use the scanner. why doest kooka, xsane recognize it?
 what steps do i need, to bring it to life? or is its not supported
 yet?

 It seems to be unsupported, at least with HPLIP ;-(

 https://answers.launchpad.net/hplip/+question/117008
 http://hplipopensource.com/hplip-web/models/deskjet/
 deskjet_2050_j510_series.html

 so i have to install a windows xp in virtualbox? :D my god.. :D:P

 At least at this right moment, I'd say yes :-(

 But as per the above links (the first one), it's like HPLIP could be
 adding scanner capabilty in a future release :-)

 Greetings,

 --
 Camaleón


 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
 Archive: http://lists.debian.org/pan.2010.09.25.17.30...@gmail.com




--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/aanlkti=y_0xutcxhpwfjpje-6pbqvxevy=dvchgrk...@mail.gmail.com

Re: hp-deskjet-6122 printer and cups

[Florian Kulzer]

On Fri, Dec 11, 2009 at 13:24:35 -0500, I Rattan wrote:
 The system is:
 
 Linux tigaon 2.6.30-4.slh.4-sidux-686 #1 SMP PREEMPT Fri Aug 14
 01:30:37 UTC 2009 i686 GNU/Linux
 
 I am trying to install hp deskjet 6122 printer via cups page.
 It finds a driver that has the attribute:
 
.. Foomatic/gutenprint-ijs.5.2
 
 and configures it. When a test page is printed the error
 message .. guntenprint-ijs is not installed.
 
 What package might contain this software?

$ apt-cache search gutenprint ijs
foomatic-db - OpenPrinting printer support - database
ijsgutenprint - inkjet server - Ghostscript driver for Gutenprint
foomatic-db-engine - OpenPrinting printer support - programs
foomatic-filters-ppds - OpenPrinting printer support - prebuilt PPD files

My guess would be ijsgutenprint.

-- 
Regards,|
  Florian   |


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Re: hp-deskjet-6122 printer and cups

[Dave Witbrodt]

I Rattan wrote:

I am trying to install hp deskjet 6122 printer via cups page.
It finds a driver that has the attribute:

   .. Foomatic/gutenprint-ijs.5.2

and configures it. When a test page is printed the error
message .. guntenprint-ijs is not installed.

What package might contain this software?


Well, I don't use gutenprint, but I do own that printer... and I do use 
CUPS.


For me, the current HPLIP and CUPS packages on Sid are working 
perfectly.  If you install these packages using 'aptitude', you will get 
all of the stuff you need for that printer automatically:


cups
cups-bsd
hplip
hplip-gui
hpijs-ppds

I also recommend

hplip-doc

You should delete any attempts you have made to configure the DeskJet 
6122 using CUPS, then configure it using HPLIP.  It will automatically 
find the proper PPD file ('hp-deskjet_6122-hpijs.ppd', from the 
'hpijs-ppds' package) if you do things this way.  (If you don't, you 
deserve whatever problems result!  ;-)



HTH,
Dave W.


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Re: HP Deskjet 3745 imprimindo preto verde

[Ronaldo Reis Junior]

Em Seg 09 Fev 2009, Ronaldo Reis Junior escreveu:
 Pessoal,

 agora tenho uma impressora HP 3745. Aparentemente funciona normal, mas
 quando uso o modo colorido, o que deveria ser preto fica esverdeado. Se uso
 o modo grayscale, o preto fica de fato preto.

 Olhei no site e não vi nenhuma referencia sobre o problema, vejam:

 http://www.linuxprinting.org/show_printer.cgi?recnum=HP-DeskJet_3745

 O drive que estou usando é:

 HPIJS 3740

 Será que existe alguma configuração que eu possa fazer para ela imprimir em
 cores mas usando o preto como preto e não preto esverdeado?

 Valeu
 Inte
 Ronaldo
 --


Pessoal,

problema resolvido. Não funciona se selecionar no print mode a opção de normal 
colorido, esta opção usa só o cartucho colorido. Tem que usar a opção 
diretamente com o dpi e escolher cor + preto.

Blz
Inte
Ronaldo

-- 
Your life would be very empty if you had nothing to regret.
--
 Prof. Ronaldo Reis Júnior
|  .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional
| : :'  : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia
| `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil
|   `- Fone: (38) 3229-8192 | ronaldo.r...@unimontes.br | chrys...@gmail.com
| http://www.ppgcb.unimontes.br/lecc | ICQ#: 5692561 | LinuxUser#: 205366
--
Favor NÃO ENVIAR arquivos do Word ou Powerpoint
Prefira enviar em PDF, Texto, OpenOffice (ODF), HTML, or RTF.


-- 
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Re: HP Deskjet 820 Cxi não imprime

[Denis]

Em 29/11/07, Saul Lima[EMAIL PROTECTED] escreveu:
 Estou migrando para linux os pcs de uma empresa e estou tendo dificuldades
 com o driver de um antiga HP Deskjet 820 Cxi. Eu já instalei o Hplip, hpijs
 e todos os ppds possíveis... Adicionei a impressora com o driver HP 820C,
 mas quando tento imprimir uma página de tsta a página fica na fila de
 impressão como job-stoped, e a impressora não responde. Já exclui e
 adicionei a impressora várias vezes tanto pelo gnome-cups-manager quanto
 pela interface do cups em localhost:631.  A máquina com a impressora está
 com o debian etch 4.0 R1...

 Alguém sabe como fazer esta impressora funcinar?

A CXi é diferente da C.

Não sei se agora existe algum driver, mas antigamente essas
impressoras Cxi nao funcionavam em Linux..


Denis.

Re: HP Deskjet 820 Cxi não imprime

[Saul Lima]

Funcionou muito obrigado pela ajuda!!

Em 29/11/07, edmarcos souza [EMAIL PROTECTED] escreveu:

 Voce tem que instalar o pacote pnm2ppa, é so isto .
 Tenhum uma empressora desta em casa, e nao troco por nada.

 Em 29/11/07, Saul Lima  [EMAIL PROTECTED] escreveu:
 
  Estou migrando para linux os pcs de uma empresa e estou tendo
  dificuldades com o driver de um antiga HP Deskjet 820 Cxi. Eu já instalei o
  Hplip, hpijs e todos os ppds possíveis... Adicionei a impressora com o
  driver HP 820C, mas quando tento imprimir uma página de tsta a página fica
  na fila de impressão como job-stoped, e a impressora não responde. Já exclui
  e adicionei a impressora várias vezes tanto pelo gnome-cups-manager quanto
  pela interface do cups em localhost:631.  A máquina com a impressora está
  com o debian etch 4.0 R1...
 
  Alguém sabe como fazer esta impressora funcinar?
 

[Fwd: Re: hp deskjet 970 cxi nicht ansteuerbar]

[Matthias Alpen]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

salve!

ueber den usb anschluss druckt er ohne weiteres. allerdings besitzt das
alte thinkpad 600e nur einen davon und in sofern waere es schon ganz
schoen, das ueber den parallelport auch hinzubekommen...

vg,


matthias
- --
[EMAIL PROTECTED]

-  Original Message 
Subject: Re: hp deskjet 970 cxi nicht ansteuerbar
Date: Fri, 20 Oct 2006 07:53:53 +0200
From: Matthias Alpen [EMAIL PROTECTED]
To: Ulf Volmer [EMAIL PROTECTED]
CC: debian-user-german@lists.debian.org
References:
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]

salve!

pstools bis jetzt noch nicht, die anderen ja.

hmmm...

vg,


matthias

Ulf Volmer wrote:
 On Thu, Oct 19, 2006 at 12:41:11PM +0200, Matthias Alpen wrote:

moin ulf!

habe ich gemacht. bcc ging an [EMAIL PROTECTED]


 Ich will dich ja nicht enttäuischen. aber in der ML sehe _ich_ deine
 Mail nicht.

 PS: Ich habe hier ~5 Treiber für den Drucker, evtl. mal durchprobieren.

 Ich tippe aber eher auf Probleme bei der Konvertierung, sind die pstools
 und die üblichen Verdächtigen installiert?


 cu
 ulf

vg,


matthias

Am 19.10.06 schrieb Ulf Volmer [EMAIL PROTECTED]:

On Wed, Oct 18, 2006 at 07:01:22PM +0200, Matthias Alpen wrote:

folgender treiber ist im gnome-cups-manager ausgewaehlt:

HP-DeskJet_970C-hpijs.ppd

Schön. Ich könnte dir möglicherweise helfen, aber wieso postest du das
nicht in die Mailing- Liste? Da sind mehr potentielle Helfer.

cu
ulf

--
Ulf Volmer
[EMAIL PROTECTED]
www.u-v.de



-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFFOhDWEVskTZt2iG8RAuEaAJ0UQjbPNi7Mgc/r4FpHsTShtapi+ACguprB
wXfSGzwaMqR5FnKZyMmTCRA=
=2vED
-END PGP SIGNATURE-


-- 
Haeufig gestellte Fragen und Antworten (FAQ): 
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Re: [Fwd: Re: hp deskjet 970 cxi nicht ansteuerbar]

[Ulf Volmer]

On Sat, Oct 21, 2006 at 02:21:43PM +0200, Matthias Alpen wrote:
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1
 
 salve!
 
 ueber den usb anschluss druckt er ohne weiteres. allerdings besitzt das
 alte thinkpad 600e nur einen davon und in sofern waere es schon ganz
 schoen, das ueber den parallelport auch hinzubekommen...

Damit duerften Treiberprobleme wegfallen.

par. Port- Settings im Bios auf sinnvolle Werte gesetzt?

Ansonsten gibt's auch Mini- USB- Hubs.

BTW: Du solltest dringend an deinem Quoting arbeiten. Das Stichwort fuer
Google waere TOFU.

cu
ulf

-- 
Ulf Volmer
[EMAIL PROTECTED]
www.u-v.de


-- 
Haeufig gestellte Fragen und Antworten (FAQ): 
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Re: hp deskjet 970 cxi nicht ansteuerbar

[Matthias Alpen]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

salve!

pstools bis jetzt noch nicht, die anderen ja.

hmmm...

vg,


matthias

Ulf Volmer wrote:
 On Thu, Oct 19, 2006 at 12:41:11PM +0200, Matthias Alpen wrote:
 
moin ulf!

habe ich gemacht. bcc ging an [EMAIL PROTECTED]
 
 
 Ich will dich ja nicht enttäuischen. aber in der ML sehe _ich_ deine
 Mail nicht.
 
 PS: Ich habe hier ~5 Treiber für den Drucker, evtl. mal durchprobieren.
 
 Ich tippe aber eher auf Probleme bei der Konvertierung, sind die pstools
 und die üblichen Verdächtigen installiert?
 
 
 cu
 ulf
 
vg,


matthias

Am 19.10.06 schrieb Ulf Volmer [EMAIL PROTECTED]:

On Wed, Oct 18, 2006 at 07:01:22PM +0200, Matthias Alpen wrote:

folgender treiber ist im gnome-cups-manager ausgewaehlt:

HP-DeskJet_970C-hpijs.ppd

Schön. Ich könnte dir möglicherweise helfen, aber wieso postest du das
nicht in die Mailing- Liste? Da sind mehr potentielle Helfer.

cu
ulf

--
Ulf Volmer
[EMAIL PROTECTED]
www.u-v.de

 
 
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFFOGRxEVskTZt2iG8RAg9aAJ9YK+Q0MVsDgSr9a+JlwmNgfuWG0QCg0Xi4
yCbYQyQhgqKlPTIgFUO8bHg=
=0RzI
-END PGP SIGNATURE-


-- 
Haeufig gestellte Fragen und Antworten (FAQ): 
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Re: hp deskjet 970 cxi nicht ansteuerbar

[Ulf Volmer]

On Wed, Oct 18, 2006 at 12:35:46AM +0200, Matthias Alpen wrote:
 hallo zusammen.
 
 habe auf meinem alten ibm thinkpad 600e neben ubuntu 6.0x auch debian
 sarge (gnome und icewm) laufen. nach installation von fast saemtlichen
 hp deskjet treibern (die er auch erkennt, djtools etc.) ist und bleibt
 der drucker (am parallelport angeschlossen) nicht ansteuerbar.

Also cups. Welchen Treiber hast du gewählt?

cu
ulf

-- 
Ulf Volmer
[EMAIL PROTECTED]
www.u-v.de


-- 
Haeufig gestellte Fragen und Antworten (FAQ): 
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Re: HP DeskJet 820 Cxi - Não Imprime via Compartilhamento do samba pelo win95

[linux.apucarana]

Se vc instalar esta impressora no linux sem nenhum driver, mesmo assim
vc vai conseguir imprimir do windows nela através do samba.

Falo com certeza porque tenho uma impressora destas.

Seu problema com certeza é no windows.


Em Ter, 2005-12-06 às 22:39 -0200, Rafael Freitas escreveu:
 Seguinte pessoal,
 máquina, servidor sarge ... como servidor de arquivos e impressão,
 compartilhados pelo samba,
 as máquinas win98se para frente quando mando imprimir .. imprime direitinhum 
 ..
 assim como as maquinas linux,
 agora as win95 pqp .. imprimem um monte de caracteres estranhos ... a danada 
 em
 tela é uma HP DESKJET 820 Cxi
 aquela .. winprinter ... que só funfa com pnm2ppa .. com o cups ... a 
 impressora
 nem acorda .. agora com o magicfilter + pnm2ppa + lpr ... funfa que é uma 
 beleza
 ... com este problema em maquinas win95 ..alguém passou por isso alguma
 dica?
 valeu.
 ___
 Tarifa Única DDI - A melhor opção para suas ligações internacionais. 
 Do fixo ou do celular você paga a mesma tarifa e ainda tem um desconto
 especial para ligar para os Estados Unidos.
 Saiba mais. Acesse www.embratel.com.br
 
 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP Deskjet 6840 Printer Problem

[Stephen Allen]

Michael Kerwin wrote:
 I am trying to get an HP Deskjet 6840 inkjet Printer to work with my
 Debian 3.1 Sarge stable system.
 
 I am trying to get it to work with lpr

Use CUPS instead, and check out this article;

http://os.newsforge.com/os/05/07/25/2030235.shtml?tid=2tid=9

It supposedly works fine with CUPS.

-- 
(On going to war over religion:) You're basically killing each other
to see who's got the better imaginary friend.   -- Rich Jeni
__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: Hp Deskjet 3535

[listasdebian]

On Fri, 28 Oct 2005 20:42:39 -0200
Joao Emanuel [EMAIL PROTECTED] wrote:

 Debian: 3.1r0a
 
 Os trabalhos estão sempre abortando e quando tento reinicializá-lo
 sempre dá cliente-error-not-possible, nunca mexi com impressoras USB,
 por isso gostaria de saber se alguém poderia me ajudar, por favor?
 
  {}s
 
 
 
 Olá

 Usando o cups? Quais pacote você tem instalado?
Uso essa impressora. Existem instruções para a
instalação dela em http://www.linuxprinting.org/,
é só procurar.

 Pode também instalar alguns pacotes foomatic,
para fazer a instalação via interface web. Mas
segundo a descrição do pacote:

...you have a lot of disk space to spare and/or
 using the CUPS or PPR web interface... 

'aptitude install foomatic-filters-ppds hpijs' deve
instalar todos os pacotes necessários.


[]
hpfn

Re: Hp Deskjet 3535

[Joao Emanuel]

Obrigado pela ajuda, realmente estava faltando os pacotes hpijs e
foomatic-db-hpijs. Fncionou maravilhosamente depois dos dois
instalados.

{}s

Em 29/10/05, listasdebian[EMAIL PROTECTED] escreveu:
 On Fri, 28 Oct 2005 20:42:39 -0200
 Joao Emanuel [EMAIL PROTECTED] wrote:

  Debian: 3.1r0a
 
  Os trabalhos estão sempre abortando e quando tento reinicializá-lo
  sempre dá cliente-error-not-possible, nunca mexi com impressoras USB,
  por isso gostaria de saber se alguém poderia me ajudar, por favor?
 
   {}s
 
 

  Olá

  Usando o cups? Quais pacote você tem instalado?
 Uso essa impressora. Existem instruções para a
 instalação dela em http://www.linuxprinting.org/,
 é só procurar.

  Pode também instalar alguns pacotes foomatic,
 para fazer a instalação via interface web. Mas
 segundo a descrição do pacote:

 ...you have a lot of disk space to spare and/or
  using the CUPS or PPR web interface...

 'aptitude install foomatic-filters-ppds hpijs' deve
 instalar todos os pacotes necessários.


 []
 hpfn

Re: HP Deskjet 3845

[copas]

 Olá.
 Não tenho essa imprssora mas também estou pretendendo
 comprá-la.
 Dê uma olhada neste local:
 http://www.linuxprinting.org/show_printer.cgi?recnum=HP-DeskJet_3845

 Não equeça de postar os resultados.
 Um abraço.


Olá pessoal,
Alguém já instalou a impressora HP Deskjet 3845 no debian 3.1,
estou
precisando de umas dicas ou tutoriais para instalar impressora.

F. W. S. Lima
Departamento de Física
Centro de Ciência da Natureza
Campus Petrônio Portela
Universidade Federal do Piauí
Teresina-Piauí-Brasil
[EMAIL PROTECTED],[EMAIL PROTECTED], [EMAIL PROTECTED]

Re: Re: HP DeskJet 932C Printer e-mail support

[AHess17990]

Hello. I just changed to Windows Me and now I can't add my printer because since I've moved from Washington to Texas, I can't find my disc. To be honest, I didn't know you needed the disc to re-connect the printer (PC dummy me). What do I need to do now?
The model number of my printer is 4562C, (695C/697C).

Please help. Thank you,
Cheryl Hess

Re: HP DeskJet 680C + CUPS = Problema Infernal

[Kleber Bonassi]

 Seguinte: configurei o CUPS no meu Sarge + Sid para imprimir através da
 HP DeskJet 680C...
 ...Alguém conhece um bug
 semelhante, ou melhor, uma solução para isto?

Adam, não sei se é o caso, mas está instalado o HPIJS (http://hpinkjet.sf.net) 
? Talvez ele resolva o seu problema. É apenas um palpite...

[]s
Kleber

Re: HP DeskJet 680C + CUPS = Problema Infernal

[Adam Victor Nazareth Brandizzi]

Em Qui, 2005-03-17 às 10:28 -0300, Kleber Bonassi escreveu:
 Adam, não sei se é o caso, mas está instalado o HPIJS 
 (http://hpinkjet.sf.net) 
 ? Talvez ele resolva o seu problema. É apenas um palpite...

Bom palpite, mas é este driver mesmo que estou usando :(

 []s
 Kleber
 
-- 
Adam Victor Nazareth Brandizzi
Estudante de Ciência da Computação - UnB
Jabber: [EMAIL PROTECTED]



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 680C + CUPS = Problema Infernal

[Marcio de Araujo Benedito]

* Adam Victor Nazareth Brandizzi ([EMAIL PROTECTED]) wrote:

 Em Qui, 2005-03-17 às 10:28 -0300, Kleber Bonassi escreveu:

  Adam, não sei se é o caso, mas está instalado o HPIJS
  (http://hpinkjet.sf.net) ? Talvez ele resolva o seu problema. É
  apenas um palpite...

 Bom palpite, mas é este driver mesmo que estou usando :(

Veja se não é probelma na impressora, na regulagem da alimentação de
papel.

Se você manda imprimir de máquina windows o problema persiste???

[]'s
--
Esta mensagem não contém nenhuma informação confidencial, 
pois se é para ser confidencial não poderia ser transitada 
por e-mail em uma lista pública. Portanto você pode fazer 
qualquer coisa com esta mensagem, incluíndo esta sátira à 
notas de copyrights ridiculas, que eu não estou nem aí!!!

Re: HP DeskJet 895C

[Mailing List]

apt-get install usbmgr.. might be help
I don't know why but after installing this package my hp dj3535 works 
fine on cups ( before that i've tried hotplug )

nx13372 wrote:
Freddy Freeloader wrote:
Wayne Topa wrote:
Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
 

Hi All,
I'm having problems with getting my HP DeskJet 895C printer to 
work.  It is connected with a usb cable.  I have, I think anyway, 
all the appropriate usb modules (ehci, uhci, usblp, and usbcore) 
loaded in the 2.6.8 kernel I'm using, and I'm running sarge(upgrade 
from woody).  I also have CUPS and the HP drivers hpijs and 
hpoj installed.  I can log onto the CUPS admin page and work with 
it so CUPS seems to be installed correctly.  However, I cannot get 
the computer to find the printer.   I know the printer works as I 
just unplugged it from another computer and used the same usb cable 
for both hookups.
Anyone have any good ideas for troubleshooting this?  Being a 
newbie to Linux I'm at the end of my own ideas as to where to go 
from here.  I have run the /etc/init.d/hpoj setup command and it 
scans for, but does not find the printer.  I have the .ppd file for 
the printer installed in the /usr/share/cups/model/ directory.  The 
/proc/bus/usb/ directory is empty.   When I tell CUPS to look to 
usb interfaces for the printer, no matter what usb interface # I 
have used, the error log tells me the device can't be found.  When 
I run gs -h the ijs device is listed in the output.   

Try installing hotplug
Description: Linux Hotplug Scripts
This package contains the scripts necessary for hotplug Linux support,
and lets you plug in new devices and use them immediately.
It includes support for PCI, Cardbus (PCMCIA), USB and Firewire devices
and can automatically configure network interfaces.
wt
 

Wayne,
I installed the hotplug module in the kernel as you suggested.   I 
even rebooted afterwards, but still no joy.


Move to tty1 then remove and insert the usb cable and check if the 
printer is claimed or not.





signature.asc
Description: OpenPGP digital signature

Re: HP DeskJet 895C

[nx13372]

Freddy Freeloader wrote:
Wayne Topa wrote:
Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
 

Hi All,
I'm having problems with getting my HP DeskJet 895C printer to 
work.  It is connected with a usb cable.  I have, I think anyway, 
all the appropriate usb modules (ehci, uhci, usblp, and usbcore) 
loaded in the 2.6.8 kernel I'm using, and I'm running sarge(upgrade 
from woody).  I also have CUPS and the HP drivers hpijs and hpoj 
installed.  I can log onto the CUPS admin page and work with it so 
CUPS seems to be installed correctly.  However, I cannot get the 
computer to find the printer.   I know the printer works as I just 
unplugged it from another computer and used the same usb cable for 
both hookups.
Anyone have any good ideas for troubleshooting this?  Being a newbie 
to Linux I'm at the end of my own ideas as to where to go from 
here.  I have run the /etc/init.d/hpoj setup command and it scans 
for, but does not find the printer.  I have the .ppd file for the 
printer installed in the /usr/share/cups/model/ directory.  The 
/proc/bus/usb/ directory is empty.   When I tell CUPS to look to usb 
interfaces for the printer, no matter what usb interface # I have 
used, the error log tells me the device can't be found.  When I run 
gs -h the ijs device is listed in the output.   

Try installing hotplug
Description: Linux Hotplug Scripts
This package contains the scripts necessary for hotplug Linux support,
and lets you plug in new devices and use them immediately.
It includes support for PCI, Cardbus (PCMCIA), USB and Firewire devices
and can automatically configure network interfaces.
wt
 

Wayne,
I installed the hotplug module in the kernel as you suggested.   I 
even rebooted afterwards, but still no joy.


Move to tty1 then remove and insert the usb cable and check if the 
printer is claimed or not.

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 895C

[Wayne Topa]

Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
 Wayne Topa wrote:
 
 Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
  
 
 Hi All,
 
 I'm having problems with getting my HP DeskJet 895C printer to work.  It 
 is connected with a usb cable.  I have, I think anyway, all the 
 appropriate usb modules (ehci, uhci, usblp, and usbcore) loaded in the 
 2.6.8 kernel I'm using, and I'm running sarge(upgrade from woody).  I 
 also have CUPS and the HP drivers hpijs and hpoj installed.  I can 
 log onto the CUPS admin page and work with it so CUPS seems to be 
 installed correctly.  However, I cannot get the computer to find the 
 printer.   I know the printer works as I just unplugged it from another 
 computer and used the same usb cable for both hookups. 
 
 Anyone have any good ideas for troubleshooting this?  Being a newbie to 
 Linux I'm at the end of my own ideas as to where to go from here.  I 
 have run the /etc/init.d/hpoj setup command and it scans for, but does 
 not find the printer.  I have the .ppd file for the printer installed in 
 the /usr/share/cups/model/ directory.  The /proc/bus/usb/ directory is 
 empty.   When I tell CUPS to look to usb interfaces for the printer, no 
 matter what usb interface # I have used, the error log tells me the 
 device can't be found.  When I run gs -h the ijs device is listed in 
 the output. 

Did you install the hotplug package? apt-get install hotplug.

If you have set up hotplug correctly, you can check the syslog to see
if the printer is being picked up.

In a console, F1-F6, run this
tail -f /var/log/syslog

watch the output as you plug/unplug the usb cable to the printer.  If
you have it set up correctly you will see something like this: NOTE
this is for my usb camera as I don't have a usb printer.

Sep  8 10:32:08 buddy kernel: uhci_hcd :00:07.2: port 1 portsc 0093
Sep  8 10:32:08 buddy kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Sep  8 10:32:08 buddy kernel: uhci_hcd :00:07.2: wakeup_hc
Sep  8 10:32:08 buddy kernel: hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 
status 0x101
Sep  8 10:32:08 buddy kernel: usb 1-1: new full speed USB device using address 2
Sep  8 10:32:08 buddy kernel: usb 1-1: new device strings: Mfr=1, Product=2, 
SerialNumber=3
Sep  8 10:32:08 buddy kernel: usb 1-1: default language 0x0409
Sep  8 10:32:08 buddy kernel: usb 1-1: Product: KODAK EasyShare CX4230 Zoom Digital 
Camera
Sep  8 10:32:08 buddy kernel: usb 1-1: Manufacturer: Eastman Kodak Company
Sep  8 10:32:08 buddy kernel: usb 1-1: SerialNumber: CX42300353680
Sep  8 10:32:08 buddy kernel: usb 1-1: hotplug
Sep  8 10:32:08 buddy kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Sep  8 10:32:08 buddy kernel: usb 1-1:1.0: hotplug
Sep  8 10:32:09 buddy usb.agent[7618]:  usbcam: loaded successfully

HTH=Hope This Helps, YMMV=Your Mileage May Vary, HAND=Have A Nice Day

wt
-- 
Just about every computer on the market today runs Unix, except the Mac
(and nobody cares about it).
-- Bill Joy 6/21/85
___


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 895C

[Freddy Freeloader]

Wayne Topa wrote:

Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
  

Wayne Topa wrote:



Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:


  

Hi All,

I'm having problems with getting my HP DeskJet 895C printer to work.  It 
is connected with a usb cable.  I have, I think anyway, all the 
appropriate usb modules (ehci, uhci, usblp, and usbcore) loaded in the 
2.6.8 kernel I'm using, and I'm running sarge(upgrade from woody).  I 
also have CUPS and the HP drivers hpijs and hpoj installed.  I can 
log onto the CUPS admin page and work with it so CUPS seems to be 
installed correctly.  However, I cannot get the computer to find the 
printer.   I know the printer works as I just unplugged it from another 
computer and used the same usb cable for both hookups. 

Anyone have any good ideas for troubleshooting this?  Being a newbie to 
Linux I'm at the end of my own ideas as to where to go from here.  I 
have run the /etc/init.d/hpoj setup command and it scans for, but does 
not find the printer.  I have the .ppd file for the printer installed in 
the /usr/share/cups/model/ directory.  The /proc/bus/usb/ directory is 
empty.   When I tell CUPS to look to usb interfaces for the printer, no 
matter what usb interface # I have used, the error log tells me the 
device can't be found.  When I run gs -h the ijs device is listed in 
the output. 



Did you install the hotplug package? apt-get install hotplug.

If you have set up hotplug correctly, you can check the syslog to see
if the printer is being picked up.

In a console, F1-F6, run this
tail -f /var/log/syslog

watch the output as you plug/unplug the usb cable to the printer.  If
you have it set up correctly you will see something like this: NOTE
this is for my usb camera as I don't have a usb printer.

Sep  8 10:32:08 buddy kernel: uhci_hcd :00:07.2: port 1 portsc 0093
Sep  8 10:32:08 buddy kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Sep  8 10:32:08 buddy kernel: uhci_hcd :00:07.2: wakeup_hc
Sep  8 10:32:08 buddy kernel: hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 
status 0x101
Sep  8 10:32:08 buddy kernel: usb 1-1: new full speed USB device using address 2
Sep  8 10:32:08 buddy kernel: usb 1-1: new device strings: Mfr=1, Product=2, 
SerialNumber=3
Sep  8 10:32:08 buddy kernel: usb 1-1: default language 0x0409
Sep  8 10:32:08 buddy kernel: usb 1-1: Product: KODAK EasyShare CX4230 Zoom Digital 
Camera
Sep  8 10:32:08 buddy kernel: usb 1-1: Manufacturer: Eastman Kodak Company
Sep  8 10:32:08 buddy kernel: usb 1-1: SerialNumber: CX42300353680
Sep  8 10:32:08 buddy kernel: usb 1-1: hotplug
Sep  8 10:32:08 buddy kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Sep  8 10:32:08 buddy kernel: usb 1-1:1.0: hotplug
Sep  8 10:32:09 buddy usb.agent[7618]:  usbcam: loaded successfully

HTH=Hope This Helps, YMMV=Your Mileage May Vary, HAND=Have A Nice Day

wt
  

Wayne,

That did the trick. I had seen the hotplug module when I built my
kernel, but had never seen the hotplug (utility?) that is installable
using apt-get. Thanks for your help. I appreciate it.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

RE: HP DeskJet 895C

[Steven Jones]

Is USB enabled in the bios?

regards

Thing

-Original Message-
From: Freddy Freeloader [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 8 September 2004 8:46 a.m.
To: [EMAIL PROTECTED]
Subject: HP DeskJet 895C


Hi All,

I'm having problems with getting my HP DeskJet 895C printer to work.  It 
is connected with a usb cable.  I have, I think anyway, all the 
appropriate usb modules (ehci, uhci, usblp, and usbcore) loaded in the 
2.6.8 kernel I'm using, and I'm running sarge(upgrade from woody).  I 
also have CUPS and the HP drivers hpijs and hpoj installed.  I can 
log onto the CUPS admin page and work with it so CUPS seems to be 
installed correctly.  However, I cannot get the computer to find the 
printer.   I know the printer works as I just unplugged it from another 
computer and used the same usb cable for both hookups. 

Anyone have any good ideas for troubleshooting this?  Being a newbie to 
Linux I'm at the end of my own ideas as to where to go from here.  I 
have run the /etc/init.d/hpoj setup command and it scans for, but does 
not find the printer.  I have the .ppd file for the printer installed in 
the /usr/share/cups/model/ directory.  The /proc/bus/usb/ directory is 
empty.   When I tell CUPS to look to usb interfaces for the printer, no 
matter what usb interface # I have used, the error log tells me the 
device can't be found.  When I run gs -h the ijs device is listed in 
the output. 


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 895C

[Freddy Freeloader]

Steven Jones wrote:
Is USB enabled in the bios?
regards
Thing
-Original Message-
From: Freddy Freeloader [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 8 September 2004 8:46 a.m.
To: [EMAIL PROTECTED]
Subject: HP DeskJet 895C
Hi All,
I'm having problems with getting my HP DeskJet 895C printer to work.  It 
is connected with a usb cable.  I have, I think anyway, all the 
appropriate usb modules (ehci, uhci, usblp, and usbcore) loaded in the 
2.6.8 kernel I'm using, and I'm running sarge(upgrade from woody).  I 
also have CUPS and the HP drivers hpijs and hpoj installed.  I can 
log onto the CUPS admin page and work with it so CUPS seems to be 
installed correctly.  However, I cannot get the computer to find the 
printer.   I know the printer works as I just unplugged it from another 
computer and used the same usb cable for both hookups. 

Anyone have any good ideas for troubleshooting this?  Being a newbie to 
Linux I'm at the end of my own ideas as to where to go from here.  I 
have run the /etc/init.d/hpoj setup command and it scans for, but does 
not find the printer.  I have the .ppd file for the printer installed in 
the /usr/share/cups/model/ directory.  The /proc/bus/usb/ directory is 
empty.   When I tell CUPS to look to usb interfaces for the printer, no 
matter what usb interface # I have used, the error log tells me the 
device can't be found.  When I run gs -h the ijs device is listed in 
the output. 

 

Yes.  LOL.  I'm not a complete newbie to computing, just to Linux and 
Debian.  

One of the first things I suspected was that usb had failed at the 
hardware level, but the khubd process would load with usb enabled in 
the BIOS and wouldn't when it usb was disabled in BIOS.  So this was one 
of the first things I looked at. 

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 895C

[Wayne Topa]

Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
 Hi All,
 
 I'm having problems with getting my HP DeskJet 895C printer to work.  It 
 is connected with a usb cable.  I have, I think anyway, all the 
 appropriate usb modules (ehci, uhci, usblp, and usbcore) loaded in the 
 2.6.8 kernel I'm using, and I'm running sarge(upgrade from woody).  I 
 also have CUPS and the HP drivers hpijs and hpoj installed.  I can 
 log onto the CUPS admin page and work with it so CUPS seems to be 
 installed correctly.  However, I cannot get the computer to find the 
 printer.   I know the printer works as I just unplugged it from another 
 computer and used the same usb cable for both hookups. 
 
 Anyone have any good ideas for troubleshooting this?  Being a newbie to 
 Linux I'm at the end of my own ideas as to where to go from here.  I 
 have run the /etc/init.d/hpoj setup command and it scans for, but does 
 not find the printer.  I have the .ppd file for the printer installed in 
 the /usr/share/cups/model/ directory.  The /proc/bus/usb/ directory is 
 empty.   When I tell CUPS to look to usb interfaces for the printer, no 
 matter what usb interface # I have used, the error log tells me the 
 device can't be found.  When I run gs -h the ijs device is listed in 
 the output. 

Try installing hotplug
Description: Linux Hotplug Scripts
 This package contains the scripts necessary for hotplug Linux support,
 and lets you plug in new devices and use them immediately.
 It includes support for PCI, Cardbus (PCMCIA), USB and Firewire devices
 and can automatically configure network interfaces.

wt
-- 
The Softwære said Windows 95 or better, so I dumped Win95  loaded LINUX.
I have not looked back since.
___


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 895C

[Freddy Freeloader]

Wayne Topa wrote:
Freddy Freeloader([EMAIL PROTECTED]) is reported to have said:
 

Hi All,
I'm having problems with getting my HP DeskJet 895C printer to work.  It 
is connected with a usb cable.  I have, I think anyway, all the 
appropriate usb modules (ehci, uhci, usblp, and usbcore) loaded in the 
2.6.8 kernel I'm using, and I'm running sarge(upgrade from woody).  I 
also have CUPS and the HP drivers hpijs and hpoj installed.  I can 
log onto the CUPS admin page and work with it so CUPS seems to be 
installed correctly.  However, I cannot get the computer to find the 
printer.   I know the printer works as I just unplugged it from another 
computer and used the same usb cable for both hookups. 

Anyone have any good ideas for troubleshooting this?  Being a newbie to 
Linux I'm at the end of my own ideas as to where to go from here.  I 
have run the /etc/init.d/hpoj setup command and it scans for, but does 
not find the printer.  I have the .ppd file for the printer installed in 
the /usr/share/cups/model/ directory.  The /proc/bus/usb/ directory is 
empty.   When I tell CUPS to look to usb interfaces for the printer, no 
matter what usb interface # I have used, the error log tells me the 
device can't be found.  When I run gs -h the ijs device is listed in 
the output. 
   

Try installing hotplug
Description: Linux Hotplug Scripts
This package contains the scripts necessary for hotplug Linux support,
and lets you plug in new devices and use them immediately.
It includes support for PCI, Cardbus (PCMCIA), USB and Firewire devices
and can automatically configure network interfaces.
wt
 

Wayne,
I installed the hotplug module in the kernel as you suggested.   I even 
rebooted afterwards, but still no joy.

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 672C

[Clive Menzies]

On (24/05/04 07:27), Donna Orsino-Lawrence wrote:
 I am not as comupter literate as those you communicate with on this website.
 All I need is to replace my installation CD.  Can you tell me how I can get one?
 I have Windows 98.
 
 Thanks,
 
 Donna Orsino-Lawrence
Hi Donna

This is a Debian (GNU/Linux based operating system) and most people here
would suggest you install Debian instead of Windows ;)  However, if
you're running Windows 98, there are printer drivers available for
Windows and other operating systems at:

http://welcome.hp.com/country/us/en/support.html

Regards

Clive

-- 
http://www.clivemenzies.co.uk
strategies for business


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 672C

[Lee Braiden]

Clive Menzies wrote:
On (24/05/04 07:27), Donna Orsino-Lawrence wrote:
 

I am not as comupter literate as those you communicate with on this website.
All I need is to replace my installation CD.  Can you tell me how I can get one?
I have Windows 98.
   

Hi Donna
This is a Debian (GNU/Linux based operating system) and most people here
would suggest you install Debian instead of Windows ;)
Clive
 

Hi Clive
I'm guessing that was spam.  Please don't feed the spammers ;)
--
Lee Braiden
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 722c et CUPS

[Jérôme Schell]

LALLOUCHE Emir a écrit :
apt-get install cupsys cupsys-client cupsys-bsd foomatic-filters 
cupsomatic-ppd


J'ai  configuré mon imprimante sur l'interface de cups (avec le bon pilote HP 
722c), elle est reconue mais rien ne sort de l'imprimante lors de la page de 
test !


Je fais un lpq
HpDESKJET722C is ready
no entries

et lp openlogo-nd-75.png 
request id is HpDESKJET722C-26 (1 file(s))

Mais ça donne rien...



Salut,

J'ai cette imprimante.
Je n'utilise pas CUPS désolé, j'utilise lpr avec le paquet pnm2ppa qui 
fournit le pilote pour cette imprimante. Je ne pense pas qu'il y ait de 
problème avec CUPS. Vérifie que tu as bien ce paquet d'installé.


--
Jérôme

[Résolu]Re: HP DeskJet 722c et CUPS

[LALLOUCHE Emir]

Probléme réglé :
il me manquait le paquet pnm2ppa.
Merci pour tout.
Emir

On Tuesday 16 March 2004 17:06, Jérôme Schell wrote:
 LALLOUCHE Emir a écrit :
  apt-get install cupsys cupsys-client cupsys-bsd foomatic-filters
  cupsomatic-ppd
 
  J'ai  configuré mon imprimante sur l'interface de cups (avec le bon
  pilote HP 722c), elle est reconue mais rien ne sort de l'imprimante lors
  de la page de test !
 
  Je fais un lpq
  HpDESKJET722C is ready
  no entries
 
  et lp openlogo-nd-75.png
  request id is HpDESKJET722C-26 (1 file(s))
  Mais ça donne rien...

 Salut,

 J'ai cette imprimante.
 Je n'utilise pas CUPS désolé, j'utilise lpr avec le paquet pnm2ppa qui
 fournit le pilote pour cette imprimante. Je ne pense pas qu'il y ait de
 problème avec CUPS. Vérifie que tu as bien ce paquet d'installé.

 --
 Jérôme

Re: hp deskjet 600c please help

[dm]

 here is the relavent parts of cups' error log


D [11/Feb/2004:02:19:08 -0600] [Job 7] -- Output goes directly to the
renderer now.
D [11/Feb/2004:02:19:08 -0600] [Job 7] 
D [11/Feb/2004:02:19:08 -0600] [Job 7] 
D [11/Feb/2004:02:19:08 -0600] [Job 7] Starting renderer
D [11/Feb/2004:02:19:08 -0600] [Job 7] JCL: job data 
D [11/Feb/2004:02:19:08 -0600] [Job 7] 
D [11/Feb/2004:02:19:08 -0600] [Job 7] renderer PID kid4=3407
D [11/Feb/2004:02:19:08 -0600] [Job 7] renderer command: gs -q -dBATCH
-dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs
-sDeviceManufacturer=HEWLETT-PACKARD -sDeviceModel=DESKJET 600
-dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -r300
-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Q
uality:PenSet=2 -dIjsUseOutputFD -sOutputFile=- -
D [11/Feb/2004:02:19:08 -0600] [Job 7] foomatic-gswrapper: gs '-dBATCH'
'-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs'
'-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD'
'-sDeviceModel=DESKJET 600' '-dDEVICEWIDTHPOINTS=612'
'-dDEVICEHEIGHTPOINTS=792' '-r300'
'-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,
Quality:PenSet=2' '-dIjsUseOutputFD' '-sOutputFile=| cat 3'
'/dev/fd/0' 31 12
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] unable to set Quality=0,
ColorMode=2, MediaType=0, err=2
D [11/Feb/2004:02:19:10 -0600] [Job 7] following will be used Quality=0,
ColorMode=2, MediaType=0
D [11/Feb/2004:02:19:10 -0600] [Job 7] 
D [11/Feb/2004:02:19:10 -0600] [Job 7] Closing renderer
D [11/Feb/2004:02:19:17 -0600] [Job 7] KID3 exited with status 0
D [11/Feb/2004:02:19:17 -0600] [Job 7] tail process done writing data to
STDOUT
D [11/Feb/2004:02:19:17 -0600] [Job 7] KID4 finished
D [11/Feb/2004:02:19:17 -0600] [Job 7] KID4 exited with status 0
D [11/Feb/2004:02:19:17 -0600] [Job 7] Renderer exit stat: 0
D [11/Feb/2004:02:19:17 -0600] [Job 7] KID3 finished
D [11/Feb/2004:02:19:17 -0600] [Job 7] Renderer process finished
D [11/Feb/2004:02:19:17 -0600] [Job 7] 
D [11/Feb/2004:02:19:17 -0600] [Job 7] Closing foomatic-rip.
D [11/Feb/2004:02:19:17 -0600] UpdateJob: job 7, file 0 is complete.
D [11/Feb/2004:02:19:17 -0600] CancelJob: id = 7
D [11/Feb/2004:02:19:17 -0600] StopJob: id = 7, force = 0
D [11/Feb/2004:02:19:17 -0600] StopJob: printer state is 3


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: hp deskjet 600c please help

[Sanjay Chigurupati]

Hi,
check www.linuxprinting.org

just search for hp dj 600 c in their database listing and follow the
instructions.

if u have problem, post the problem to the list.




   

  dm   

  [EMAIL PROTECTED]To:   [EMAIL PROTECTED]  
  
  p.com[EMAIL PROTECTED]
 
   cc: 

  11/02/2004 12:05 Subject:  hp deskjet 600c please help   

  AM   

   

   







Please help me configure my deskjet 600c, I keep finding lists every
like here

http://hpinkjet.sourceforge.net/printmodedescr.php#DJ6xx


and various listervs but no matter what I try i can not get it
configured.



I have tried foomatic, cups, apsfilterconfig, printtool with hp 660
hp600 hp600 color and no success


when i do autodetect in printool it detects a DESKJET 600 so I am
pretty sure the cable works.

I am starting to get hopeless.


Thankyou for your help in advance.



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
[EMAIL PROTECTED]







-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: hp deskjet 600c please help

[M . Kirchhoff]

Sanjay Chigurupati Sanjay.Chigurupati at lntinfotech.com writes:

 Please help me configure my deskjet 600c, I keep finding lists every
 like here

Have you tried the following HOW-TO to ensure you've got all the necessary
components?

http://mumford1.dyndns.org/~bs7452/linuxhelp/cups.html

--M. Kirchhoff




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: hp deskjet 600c please help

[Bill Benedetto]

 dm  writes:

  dm Please help me configure my deskjet 600c, I keep finding lists every
  dm like here
  dm
  dm http://hpinkjet.sourceforge.net/printmodedescr.php#DJ6xx
  dm
  dm and various listervs but no matter what I try i can not get it
  dm configured.
  dm
  dm I have tried foomatic, cups, apsfilterconfig, printtool with hp 660
  dm hp600 hp600 color and no success
  dm
  dm when i do autodetect in printool it detects a DESKJET 600 so I am
  dm pretty sure the cable works.

Here's a chapter from an upcoming book that talks about SAMBA.

*BUT* it also goes into great detail about CUPS and explains how
it works.  I found it a great resource:

  
http://www.linuxprinting.org/kpfeifle/SambaPrintHOWTO/Samba-HOWTO-Collection-3.0-PrintingChapter-11th-draft.pdf

HTH,
- Bill
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
Bill Benedetto [EMAIL PROTECTED]The Goodyear Tire  Rubber Co.
I don't speak for Goodyear and they don't speak for me.  We're both happy.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: hp deskjet 600c please help

[Jacob S.]

On Tue, 10 Feb 2004 12:35:24 -0600
dm [EMAIL PROTECTED] wrote:

 
 
 Please help me configure my deskjet 600c, I keep finding lists every
 like here
 
 http://hpinkjet.sourceforge.net/printmodedescr.php#DJ6xx
 
 
 and various listervs but no matter what I try i can not get it
 configured.
 
 
 
 I have tried foomatic, cups, apsfilterconfig, printtool with hp 660
 hp600 hp600 color and no success
 
 
 when i do autodetect in printool it detects a DESKJET 600 so I am
 pretty sure the cable works.

After doing an apt-get install cupsys cupsys-bsd cupsys-client have
you tried going to http://localhost:631 in your browser and configuring
the printer from there? (You'll need hpijs installed as well, of
course.)

That was what I had to do to get my HP OfficeJet G85 working properly.

HTH,
Jacob

- 
GnuPG Key: 1024D/16377135

Some software money can't buy. For everything else there's Micros~1. 


pgp0.pgp
Description: PGP signature

Re: hp deskjet 600c please help

[Clive Menzies]

On (10/02/04 12:35), dm wrote:
 Please help me configure my deskjet 600c, I keep finding lists every
 like here
 
 http://hpinkjet.sourceforge.net/printmodedescr.php#DJ6xx
 
 
 and various listervs but no matter what I try i can not get it
 configured.
 
 
 
 I have tried foomatic, cups, apsfilterconfig, printtool with hp 660
 hp600 hp600 color and no success
 
 
 when i do autodetect in printool it detects a DESKJET 600 so I am
 pretty sure the cable works.
Have you tried setting it up via your webrowser:

http://localhost:631/admin

login as root

You should then be able to set it up.  However, you may also need to
install hpijs and gs

HTH

Clive


-- 
http://www.clivemenzies.co.uk
strategies for business


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: hp deskjet 600c please help

[dm]

 After doing an apt-get install cupsys cupsys-bsd cupsys-client have
 you tried going to http://localhost:631 in your browser and
 configuring the printer from there? (You'll need hpijs installed as
 well, of course.)
 
 That was what I had to do to get my HP OfficeJet G85 working properly.
 

thanks, i tired that with both the hp deskjet series and the new hp
deskjet series drive with no result when printing a test page.

and the hpijs package is installed.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP Deskjet 670 C, GNU/Debian testing, Linux 2.4.21 configuration

[Thomas Pimmel]

Salut,

Le Samedi 2 Août 2003 08:33, Guillaume Riviere a écrit :

 - mon kernel (2.4.21) est compilé avec
 les options:
 Parrallel port support  Parrallel port supportY
 Parrallel port support  PC-Style Hardware Y
 Parrallel port support  Multi-IO CardsY
 Character Devices   Parrallel priter support  Y

Multi-IO cards ? Tu as une carte de ce genre ? Sinon vire-le : This adds 
support for multi-IO PCI cards that have parallel and serial ports.

 - voici le message du kernel au boot
 $ dmesg | grep parport
 parport0: PC-style at 0x378 [PCSPP(,...)]
 lp0: using parport0 (polling).

Oui, ça c'est normal.

 lp:
 queuing is enabled
 printing is enabled
 no entries
 no daemon present

Si jer compare avec le mien :

Laser:
printer is on device 'parallel' speed -1
queuing is enabled
printing is enabled
no entries
daemon present

Il te manque déjà printer is on device 'parallel' Le problème 
viendrait-il de la reco du port // ?

Dernières choses : pourquoi ne pas mettre l'option m plutôt que y dans tes 
options de compil ? Ainsi tu peux retirer ou activer tes modules avec 
modconf, dynamiquement.

Tom.
-- 
Thomas Pimmel
email : [EMAIL PROTECTED]
http : http://www.ringard.org

Re: HP Deskjet 940C

[Lucas Moulin]

On 27 Feb 2003 14:34:47 +0100
Boris de Laage [EMAIL PROTECTED] wrote:
 
 je voudrais installer et utiliser une imprimante HP DJ940C. J'ai
 apt-gettisé les paquets CUPS qui vont bien, configuré le tout grace au
 fichier PPD fourni par linuxprint.org, mais rien ne s'imprime.
 Mon imprimante est connectee sur un port USB, donc accessible via
 /dev/usb/lp0. J'ai chargé le module printer (ou plutot Hotplug s'en
 est chargé), bref, tout a l'air de bien fonctionner, sauf que :

Je vais pouvoir t'aider, j'ai installé mon HP Deskjet 930c hier soir :)
Alors tout d'abord, il faut installer quelques paquets :

apt-get install cupsys cupsys-client cupsys-bsd foomatic-bin foomatic-db

Ensuite, copie le fichier que tu as généré sur www.linuxprinting.org
dans /usr/share/cups/model. Puis :

chmod a+r /usr/share/cups/model/ton_fichier.ppd
killall -HUP cupsd

Et tu peux configurer ton imprimante via l'interface web de CUPS
(localhost:631).

Tout marchera à merveille.

-- 
Lucas Moulin [EMAIL PROTECTED]
Why go against tradition when we can admit defeat, live in decline, be
the victim of our own design -- NOFX


pgpnxIziCHHXV.pgp
Description: PGP signature

Re: HP Deskjet 940C

[Lucas Moulin]

On 27 Feb 2003 23:01:38 +0100
Damien Merenne [EMAIL PROTECTED] wrote:

 Perso, je crois qu'il y a une méthode plus propre, il suffit
 d'utiliser directement foomatic:

Ah oui, pas mal, je le note. Merci de m'aider à garder ma Debian propre
:)

-- 
Lucas Moulin [EMAIL PROTECTED]
Why go against tradition when we can admit defeat, live in decline, be
the victim of our own design -- NOFX


pgp9cmEZ5U0mB.pgp
Description: PGP signature

Re: HP Deskjet no Debian

[Edson Yassuo Fugio]

On Fri, 14 Feb 2003 20:23:27 -0200
Ivan Bittencourt de Araújo e Silva Neto [EMAIL PROTECTED] wrote:

 Ola, estou tentando configurar minha HP Deskjet 820 Cxi (Winprinter) no linux
 mas nao estou obtendo sucesso. To com o CUPS instalado, ele detecta a
Não sei se o cups da debian tem a configuração especial para essa impressora, 
pois é necessário instalar o pacote pnm2ppa para imprimir. Instale o pnm2ppa e 
procure uma configuração (arquivo ppd) para o cups no www.linuxprinting.org

[]
Edson Fugio

Re: HP Deskjet no Debian

[Savio Ramos]

On Fri, 14 Feb 2003 20:23:27 -0200
Ivan Bittencourt de Araújo e Silva Neto
[EMAIL PROTECTED] wrote:

 Ola, estou tentando configurar minha HP Deskjet 820 Cxi
 (Winprinter) no linux mas nao estou obtendo sucesso. To com o
 CUPS instalado, ele detecta a impressora na porta LPT1 certinho,
 mas na hora que eu mando imprimir ele diz que o job foi enviado,

Na hora em que voce manda imprimir de onde? Qual o comando?
Se for o que estou pensando...
Instale o qtcups: apt-get install qtcups

Na hora de imprimir digite qtcups (ou qtcups %s) no campo de
comandos.

No gnome-gv por exemplo: clique em
parâmetros--preferência--impressão e nesta aba coloque qtcups %s

Espero ter ajudado...

 mas a impressora nao imprime nada. Alguem tem alguma ideia do
 que pode ser? Agradeco qualquer ajuda.
 
 -- 
  Ivan Bittencourt de Araujo e S Neto  
  [EMAIL PROTECTED]
 
 
 -- 
 To UNSUBSCRIBE, email to
 [EMAIL PROTECTED] with a subject
 of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
 
 

Re: HP Deskjet no Debian

[Glaucius Junior]

On Fri, 14 Feb 2003 20:23:27 -0200
Ivan Bittencourt de Araújo e Silva Neto [EMAIL PROTECTED] wrote:

 Ola, estou tentando configurar minha HP Deskjet 820 Cxi (Winprinter) no linux
 mas nao estou obtendo sucesso. To com o CUPS instalado, ele detecta a
 impressora na porta LPT1 certinho, mas na hora que eu mando imprimir ele diz
 que o job foi enviado, mas a impressora nao imprime nada. Alguem tem alguma
 ideia do que pode ser? Agradeco qualquer ajuda.

dah uma olhada nos logs

tail -f /var/log/cups/error_log

pode ser o ESP Ghostprint, a falta dele


www.cups.org pra pegar o ESP Ghostprint


mas dah uma olhada nos logs do cups e envia pra ca, assim fica mais facil de 
ajudar


abraços a todos da DUP 
 
 -- 
  Ivan Bittencourt de Araujo e S Neto   [EMAIL PROTECTED]
 
 
 -- 
 To UNSUBSCRIBE, email to [EMAIL PROTECTED]
 with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
 


-- 

Glaucius Djalma Pereira Junior
http://people.debian-rs.org/~h2so4
[EMAIL PROTECTED]

Re: Fwd: Re: HP Deskjet 970Cxi an USB

[Dirk Müller]

Hallo,

Am Freitag, 20. Dezember 2002 21:36 schrieb Jens Zechlin:
 Hallo,

 On Fri, 20 Dec 2002 15:21:48 +0100

 Dirk Müller [EMAIL PROTECTED] wrote:
  Am Freitag, 20. Dezember 2002 05:19 schrieb Stephan Dietl:
   Als ich dann 2.2.20-vanilla installierte funzte es mit CUPS ohne
   Probleme, das USB-Device wurde schon beim Booten richtig erkannt.

 Also ich habe diesen Drucker (HP DJ970Cxi) bei mir mit dem normalen
 2.4er-Kernel (2.4.18-bf2.4) von woody laufen. Eingestöpselt, Cups
 installiert, eingerichtet - lief, ohne irgendwelche Probleme. Liegt es
 vielleicht am Chipsatz? Ich hatte mit diesem Drucker unter Win2K
 Probleme, weil mein VIA KT133 unter Win2K wohl irgendwelche Probleme mit
 den USB-Ports hat, unter Woody läufts aber :-)

ne, am Chipsatz liegt es bestimmt nicht! Ist ein guter, alter BX! Früher, 
unter Windows (schon ne ganze Zeit her) lief alles einwandfrei! Die Probleme 
mit dem Drucker habe ich auch erst seit ca. 0,5 Jahren!

Ich denke ich muß das einfach mal beobachten. Ich hab da übrigens die Mandrake 
9 drauf, noch nicht die Woddy, leider! Kommt aber noch! Die Server laufen 
schon alle unter Debian, nur beim Desktop bin ich noch nicht so weit. Hab 
gedacht es könnte evtl ein allgemeines Prob unter Linux sein und deshlab an 
diese Liste geschreiben. (Bei Mandrake gibts ja keine gscheite, oder irreich 
mich da!?)


 Gruss
  Jens

Danke, Dirk


--
Häufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Fwd: Re: HP Deskjet 970Cxi an USB

[Dirk Müller]

Hallo!

Am Freitag, 20. Dezember 2002 05:19 schrieb Stephan Dietl:
 Als ich dann 2.2.20-vanilla installierte funzte es mit CUPS ohne
 Probleme, das USB-Device wurde schon beim Booten richtig erkannt.

Erkannt wird das USB-Device schon korrekt, leider unterbricht da immer wieder
irgendwas. Auf jeden Fall kann ich nicht auf einen 2.2er Kernel wechseln, das
hab ich echt nicht vor!

 Zeitmangel verhinderte eine eingehendere Auseinandersetzung mit dem
 Grund, aber vielleicht ist das ein Ansatz für dich?

So ähnlich gehts mir auch, hab genaug andere Sachen zu tun! Deshalb würde ich
das Prob am liebsten auch umgehen, nur wie!

Na, trotzdem vielen Dank!

Dirk




--
Häufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Re: Fwd: Re: HP Deskjet 970Cxi an USB

[Jens Zechlin]

Hallo,

On Fri, 20 Dec 2002 15:21:48 +0100
Dirk Müller [EMAIL PROTECTED] wrote:

 Am Freitag, 20. Dezember 2002 05:19 schrieb Stephan Dietl:
  Als ich dann 2.2.20-vanilla installierte funzte es mit CUPS ohne
  Probleme, das USB-Device wurde schon beim Booten richtig erkannt.

Also ich habe diesen Drucker (HP DJ970Cxi) bei mir mit dem normalen
2.4er-Kernel (2.4.18-bf2.4) von woody laufen. Eingestöpselt, Cups
installiert, eingerichtet - lief, ohne irgendwelche Probleme. Liegt es
vielleicht am Chipsatz? Ich hatte mit diesem Drucker unter Win2K
Probleme, weil mein VIA KT133 unter Win2K wohl irgendwelche Probleme mit
den USB-Ports hat, unter Woody läufts aber :-)

Gruss
 Jens


-- 
Häufig gestellte Fragen und Antworten (FAQ): 
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)

Re: HP Deskjet 970Cxi an USB

[Stephan Dietl]

Hallo!

Dirk Müller [EMAIL PROTECTED] schrieb:
[...]
 kernel: hub.c: USB new device connect on bus1/2, assigned device number 3
 kernel: usb.c: USB device not accepting new address=3 (error=-110)
 kernel: hub.c: USB new device connect on bus1/2, assigned device number 4
 kernel: usb.c: USB device not accepting new address=4 (error=-110)
 kernel: printer.c: usblp0: removed

Ich hab bei einer Bekannten unlängst Woody aufgesetzt, der dortige
Drucker war ein HP Deskjet 3820. Bei Benutzen von Kernelflavor bf24 von
der Install her und kernel-image-2.4.18-k7 kam es bei mir zu o.g.
Meldungen ohne daß vorher der Drucker überhaupt reagierte.

Als ich dann 2.2.20-vanilla installierte funzte es mit CUPS ohne
Probleme, das USB-Device wurde schon beim Booten richtig erkannt.

Zeitmangel verhinderte eine eingehendere Auseinandersetzung mit dem
Grund, aber vielleicht ist das ein Ansatz für dich?


HTH,

Ciao,

Steve
-- 
www.cargal.org
GnuPG-key-ID: 0x051422A0
Be the change you want to see in the world-Mahatma Gandhi
Jabber-ID: [EMAIL PROTECTED]



msg29518/pgp0.pgp
Description: PGP signature

Re: HP Deskjet 816C und CUPS

[Andreas Pakulat]

On 27.Okt 2002 - 23:51:50, Andreas Pakulat wrote:
 Hi Leute,
 
 hatte vor einer Weile schonmal wegen dem Drucker gepostet und auch Hilfe
 bekommen. Jedoch stellte sich mittlerweile heraus das der mir damals
 empfohlene gimpprint-Treiber für CUPS nicht mit durch psnup, pstops und
 ähnlichen Programmen bearbeitete Postscriptfiles umgehen kann. Ergebnis
 des Drucks ist eine beinahe schwarze Seite.
 
 Ich bin nun auf der Suche nach 1 bis 2 neuen Treibern für den Drucker.
 Hier mal ein paar Infos dazu:
 
 Drucker ist HP Deskjet 816C (den gibts wirklich! auch wenn der auf der
 HP Seite nicht zu finden ist) Der wurde mal irgendwann bei Aldi
 verkauft.
 
 Ich brauche mind. 1 Treiber für halbwegs vernünftigen Graustufendruck
 ohne das Grafiken gerastert werden (hatte schon den Deskjet
 Foomatic+pcl3 und Foomatic+deskjet probiert).
 
 Und einen Treiber für Bunte Bilder, ich hatte schon gesehen daß einige
 Treiber Farbe nicht unterstützen deswegen führe ich das hier separat
 auf. Es wäre kein Problem für mich 2 verschiedene Treiber für Farbe und
 S/W-Grau Druck zu verwenden, da eh 2 Drucker unter Cups eingerichtet
 sind dafür.
 
 Bin für alle Hinweise dankbar. Wenn einer mir erklären kann wie ich das
 mit nem DruckSystem wie BSD o.ä. und apsfilter oder so hinkriege ist das
 auch OK. Wichtig ist für mich das ich die Auflösung des Druckers (ich
 glaube 300 dpi) auch sehe und das ich die Wahl zwischen Grau (nicht zu
 stark gerasterte Grafiken) und Farbe habe.

Kann mir selbst antworten und tue daß auch damit die Lösung in der Liste
und im Archiv ist.

Ich hätte lieber erstmal auf linuxprinting.org nachgucken sollen - Asche
auf mein Haupt.

Habe jetzt folgendes gemacht:
Pakete hpijs und libijs installiert (warum ich die bis jetzt übersehen
hatte weiß ich nicht denn hpijs kenne ich schon von SuSE her) und dann
habe ich mir noch von linuxprinting.org eine PPD Datei für meinen
Drucker und LPD-O-Matic (also Cups) erzeugen lassen. Diese dann nach
/usr/share/cups/HP kopiert und cupsys neu gestartet schon konnte ich den
Treiber auswählen.

Was mir bei dem Treiber nicht gefällt ist daß man den reinen S/W Druck
nicht auswählen kann und so die Farbpatrone auch immmer benutzt wird,
aber vielleicht kommt das ja noch irgendwann.

Andreas



-- 
Im Zugabteil sitzen sich zwei Männer gegenüber.
Der eine kaut unentwegt einen Apfelkern nach dem anderen.
Interessiert fragt sein Gegenüber, was es damit auf sich habe.
Ach, wissen Sie, Apfelkern-Kauen steigert unheimlich die Intelligenz.
Wenn Sie wollen, verkaufe ich Ihnen fünf Stück für vierzig Mark.
Fasziniert zückt der andere seinen Geldbeutel, nimmt die Kerne und
fängt an zu kauen.
Auf einmal fragt er: Sagen Sie, sind vierzig Mark nicht etwas teuer
für fünf lumpige Kerne?
Sehen Sie, bekommt er zur Antwort, es hilft doch schon!



msg22838/pgp0.pgp
Description: PGP signature

Re: HP Deskjet 640C (Woody)

[Andreas Pakulat]

On 23.Okt 2002 - 09:30:38, Menuhin Saitov wrote:
 Hallo,
 Ich habe den obengennten Drucker einrichten wollen.
 Ich habe magicfilter insteliert und eingerihctet.
 mit deskjet modul und auf /dev/lp0
 Der Drucker fäng an zu drucken aber mach nur leere Seiten oder irdendein quatsch 
druckt.
 Was mach ich falsch.

Keine Ahnung (leider). Aber mein Tipp wäre: Umstieg auf CUPS, dann
fallen die Filter weg, die Einrichtung geht über Webinterface, alte
Programme die sowas wie lp oder lpr als Druckbefehl nutzen laufen dank
BDS-Drucksystem-Emulation immernoch...

Hier läuft ein HP DJ 816C (Aldidrucker) wunderbar mit dem HPDJ840C
gimpprint Treiber.

-- 
Wußten Sie schon...
... daß man 150 Kilokalorien verbraucht, wenn man eine Stunde lang mit
dem Kopf an die Wand schlägt?



msg22146/pgp0.pgp
Description: PGP signature

Re: HP deskjet y el nivel de tinta

[Dr. Aldo Medina]

No te puedo ayudar mucho, pero a mí me funcionó a la primera instalando
simplemente el paquete debian con mi HP PSC750xi. Todo lo demás lo hice
utilizando las instrucciones de linuxprinting.

[EMAIL PROTECTED] wrote:
 
 Hola,
 
 No he conesguido encontrar ningún programa para consultar el nivel de
 tinta de mi impresora. Y veo un poco fuerte tener que instalar windows
 para poder ver esa pequeñez.
 
 Me dijeron que utilizar a el HPOJ pero no consigo poner el demonio a
 funcionar con lo que los clientes no tiran. Si alquien ha conseguido
 hacer funcionar el HPOJ que me diga que es lo que he de hacer. Yo he
 intentado hacer lo que dice la documentacion, pero nada.
 
 Un saludo,
 
 Pedro

Linux User #98419 -o)| A sufficiently advanced technology 
http://counter.li.org  /\| would be indistinguishable from
ICQ 94335020  _\_v   | magic  -- Arthur C. Clarke  
 | 
 |

Re: HP deskjet y el nivel de tinta

[Antonio Trujillo Carmona]

El dom, 20-10-2002 a las 02:22, [EMAIL PROTECTED] escribió:
 
 Hola,
 
 No he conesguido encontrar ningún programa para consultar el nivel de
 tinta de mi impresora. Y veo un poco fuerte tener que instalar windows
 para poder ver esa pequeñez.
 
 Me dijeron que utilizar a el HPOJ pero no consigo poner el demonio a
 funcionar con lo que los clientes no tiran. Si alquien ha conseguido
 hacer funcionar el HPOJ que me diga que es lo que he de hacer. Yo he
 intentado hacer lo que dice la documentacion, pero nada.
 
 Un saludo,
 
 Pedro
 
 -- 
 Pedro Martinez Juliá
 \  [EMAIL PROTECTED]
 )|[EMAIL PROTECTED]
 /http://yoros.cjb.net
 Socio HispaLinux #311
 Usuario Linux #275438 - http://counter.li.org
 GnuPG public information:  pub  1024D/74F1D3AC
 Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC
El hpoj-xojpane no tiene que ver demasiado con el hpoj que sirve para
crear un puerto local que se conecte a impresoras por usb o por red,
para usarlo basta con dar el nombre yla ip de la impresora, esto es si
tienes (como dices) tu impresora en el cups algo asi como 
hpoj-xojpane [EMAIL PROTECTED]
deberia de funcionar (no estoy en el trabajo donde lo tengo instalado y
lo uso por lo que no recuerdo si tiene algun parametro, lo siento).
si funciona se te abre una ventana con información si no te dice que esa
impresora no lo soporta.
--
Por favor, NO utilice formatos  de archivo  propietarios para el
intercambio de  documentos, como DOC y XLS, sino HTML, RTF, TXT,
CSV o cualquier otro que no obligue a utilizar un programa de un
fabricante  concreto para tratar la información contenida en él.
SALUD

Re: HP deskjet y el nivel de tinta

[yoros]

On Sun, Oct 20, 2002 at 08:36:04PM +0200, Antonio Trujillo Carmona wrote:
 El dom, 20-10-2002 a las 02:22, [EMAIL PROTECTED] escribió:
  
  Hola,
  
  No he conesguido encontrar ningún programa para consultar el nivel de
  tinta de mi impresora. Y veo un poco fuerte tener que instalar windows
  para poder ver esa pequeñez.
  
  Me dijeron que utilizar a el HPOJ pero no consigo poner el demonio a
  funcionar con lo que los clientes no tiran. Si alquien ha conseguido
  hacer funcionar el HPOJ que me diga que es lo que he de hacer. Yo he
  intentado hacer lo que dice la documentacion, pero nada.
  
  Un saludo,
  
  Pedro
  
  -- 
  Pedro Martinez Juliá
  \  [EMAIL PROTECTED]
  )|[EMAIL PROTECTED]
  /http://yoros.cjb.net
  Socio HispaLinux #311
  Usuario Linux #275438 - http://counter.li.org
  GnuPG public information:  pub  1024D/74F1D3AC
  Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC
 El hpoj-xojpane no tiene que ver demasiado con el hpoj que sirve para
 crear un puerto local que se conecte a impresoras por usb o por red,
 para usarlo basta con dar el nombre yla ip de la impresora, esto es si
 tienes (como dices) tu impresora en el cups algo asi como 
 hpoj-xojpane [EMAIL PROTECTED]
 deberia de funcionar (no estoy en el trabajo donde lo tengo instalado y
 lo uso por lo que no recuerdo si tiene algun parametro, lo siento).
 si funciona se te abre una ventana con información si no te dice que esa
 impresora no lo soporta.
 --
 Por favor, NO utilice formatos  de archivo  propietarios para el
 intercambio de  documentos, como DOC y XLS, sino HTML, RTF, TXT,
 CSV o cualquier otro que no obligue a utilizar un programa de un
 fabricante  concreto para tratar la información contenida en él.
 SALUD

He instalado el paquete hpoj y vienen algunos programas para enviar y
recibir información a distiontos perifericos relacionados con productos
HP (por ejemplo el scanner de una multi...). A partir de esto, parece
ser, que se puede obtener el nivel de tinta de mi HP, pero no consigo
con el codigo adecuado. Si quiero acceder a traves de cups tengo que
configurar el HPOJ para cups y los programas que lleva hacen los mismo
que el interfaz grafico del que hablas. Gracias por la información pero
creo que seguiré buscando cual es el codigo relacionado con la tinta.

Un salduo,

Pedro

-- 
Pedro Martinez Juliá
\  [EMAIL PROTECTED]
)|[EMAIL PROTECTED]
/http://yoros.cjb.net
Socio HispaLinux #311
Usuario Linux #275438 - http://counter.li.org
GnuPG public information:  pub  1024D/74F1D3AC
Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC


pgpoeHJjTgexM.pgp
Description: PGP signature

Re: HP deskjet y el nivel de tinta

[Dr. Aldo Medina]

[EMAIL PROTECTED] wrote:
 
 On Sun, Oct 20, 2002 at 08:36:04PM +0200, Antonio Trujillo Carmona wrote:
  El dom, 20-10-2002 a las 02:22, [EMAIL PROTECTED] escribió:
  
   Hola,
  
   No he conesguido encontrar ningún programa para consultar el nivel de
   tinta de mi impresora. Y veo un poco fuerte tener que instalar windows
   para poder ver esa pequeñez.
  
   Me dijeron que utilizar a el HPOJ pero no consigo poner el demonio a
   funcionar con lo que los clientes no tiran. Si alquien ha conseguido
   hacer funcionar el HPOJ que me diga que es lo que he de hacer. Yo he
   intentado hacer lo que dice la documentacion, pero nada.
  
   Un saludo,
  
   Pedro
  
   --
   Pedro Martinez Juliá
   \  [EMAIL PROTECTED]
   )|[EMAIL PROTECTED]
   /http://yoros.cjb.net
   Socio HispaLinux #311
   Usuario Linux #275438 - http://counter.li.org
   GnuPG public information:  pub  1024D/74F1D3AC
   Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC
  El hpoj-xojpane no tiene que ver demasiado con el hpoj que sirve para
  crear un puerto local que se conecte a impresoras por usb o por red,
  para usarlo basta con dar el nombre yla ip de la impresora, esto es si
  tienes (como dices) tu impresora en el cups algo asi como
  hpoj-xojpane [EMAIL PROTECTED]
  deberia de funcionar (no estoy en el trabajo donde lo tengo instalado y
  lo uso por lo que no recuerdo si tiene algun parametro, lo siento).
  si funciona se te abre una ventana con información si no te dice que esa
  impresora no lo soporta.
  --
  Por favor, NO utilice formatos  de archivo  propietarios para el
  intercambio de  documentos, como DOC y XLS, sino HTML, RTF, TXT,
  CSV o cualquier otro que no obligue a utilizar un programa de un
  fabricante  concreto para tratar la información contenida en él.
  SALUD
 
 He instalado el paquete hpoj y vienen algunos programas para enviar y
 recibir información a distiontos perifericos relacionados con productos
 HP (por ejemplo el scanner de una multi...). A partir de esto, parece
 ser, que se puede obtener el nivel de tinta de mi HP, pero no consigo
 con el codigo adecuado. Si quiero acceder a traves de cups tengo que
 configurar el HPOJ para cups y los programas que lleva hacen los mismo
 que el interfaz grafico del que hablas. Gracias por la información pero
 creo que seguiré buscando cual es el codigo relacionado con la tinta.
 
 Un salduo,
 
 Pedro

No te funciona ptal-devid?
En mi HP 750xi en la línea VSTATUS me dice los niveles con KPxxx y CPxxx
siendo los niveles de negro y color respectivamente.

-- 
Linux User #98419 -o)| Dí la verdad y corre - Proverbio 
http://counter.li.org  /\| Yugoslavo  
ICQ 94335020  _\_v   | 
 | 
 |

Re: HP deskjet y el nivel de tinta

[yoros]

On Sun, Oct 20, 2002 at 03:10:06PM -0500, Dr. Aldo Medina wrote:
 [EMAIL PROTECTED] wrote:
  
  On Sun, Oct 20, 2002 at 08:36:04PM +0200, Antonio Trujillo Carmona wrote:
   El dom, 20-10-2002 a las 02:22, [EMAIL PROTECTED] escribió:
   
Hola,
   
No he conesguido encontrar ningún programa para consultar el nivel de
tinta de mi impresora. Y veo un poco fuerte tener que instalar windows
para poder ver esa pequeñez.
   
Me dijeron que utilizar a el HPOJ pero no consigo poner el demonio a
funcionar con lo que los clientes no tiran. Si alquien ha conseguido
hacer funcionar el HPOJ que me diga que es lo que he de hacer. Yo he
intentado hacer lo que dice la documentacion, pero nada.
   
Un saludo,
   
Pedro
   
--
Pedro Martinez Juliá
\  [EMAIL PROTECTED]
)|[EMAIL PROTECTED]
/http://yoros.cjb.net
Socio HispaLinux #311
Usuario Linux #275438 - http://counter.li.org
GnuPG public information:  pub  1024D/74F1D3AC
Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC
   El hpoj-xojpane no tiene que ver demasiado con el hpoj que sirve para
   crear un puerto local que se conecte a impresoras por usb o por red,
   para usarlo basta con dar el nombre yla ip de la impresora, esto es si
   tienes (como dices) tu impresora en el cups algo asi como
   hpoj-xojpane [EMAIL PROTECTED]
   deberia de funcionar (no estoy en el trabajo donde lo tengo instalado y
   lo uso por lo que no recuerdo si tiene algun parametro, lo siento).
   si funciona se te abre una ventana con información si no te dice que esa
   impresora no lo soporta.
   --
   Por favor, NO utilice formatos  de archivo  propietarios para el
   intercambio de  documentos, como DOC y XLS, sino HTML, RTF, TXT,
   CSV o cualquier otro que no obligue a utilizar un programa de un
   fabricante  concreto para tratar la información contenida en él.
   SALUD
  
  He instalado el paquete hpoj y vienen algunos programas para enviar y
  recibir información a distiontos perifericos relacionados con productos
  HP (por ejemplo el scanner de una multi...). A partir de esto, parece
  ser, que se puede obtener el nivel de tinta de mi HP, pero no consigo
  con el codigo adecuado. Si quiero acceder a traves de cups tengo que
  configurar el HPOJ para cups y los programas que lleva hacen los mismo
  que el interfaz grafico del que hablas. Gracias por la información pero
  creo que seguiré buscando cual es el codigo relacionado con la tinta.
  
  Un salduo,
  
  Pedro
 
 No te funciona ptal-devid?
 En mi HP 750xi en la línea VSTATUS me dice los niveles con KPxxx y CPxxx
 siendo los niveles de negro y color respectivamente.
 
 -- 
 Linux User #98419 -o)| Dí la verdad y corre - Proverbio 
 http://counter.li.org  /\| Yugoslavo  
 ICQ 94335020  _\_v   | 
  | 
  |


Mi impresora es una HP 845c, y me sale esto con el pta-devid:

MFG:HEWLETT-PACKARD;MDL:DESKJET
845C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet
845C;SERN:CN1A91B2VSSX;VSTATUS:$HB0$FC0,ff,DN,OFFF,CUT;VP:0800,FL,B0;

De ahí no obtengo información alguna referente a los niveles de tinta, o
al menos eso parece.

Saludos,

Pedro

-- 
Pedro Martinez Juliá
\  [EMAIL PROTECTED]
)|[EMAIL PROTECTED]
/http://yoros.cjb.net
Socio HispaLinux #311
Usuario Linux #275438 - http://counter.li.org
GnuPG public information:  pub  1024D/74F1D3AC
Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC


pgpVB5nbqTLA2.pgp
Description: PGP signature

Re: HP deskjet y el nivel de tinta

[yoros]

On Sun, Oct 20, 2002 at 11:00:24PM +0200, Rafael C. Gawenda wrote:
 * [EMAIL PROTECTED] [EMAIL PROTECTED] [2002-10-20 22:26 (CEST)]
 
  -- 
  Pedro Martinez Juliá
  \  [EMAIL PROTECTED]
  )|[EMAIL PROTECTED]
  /http://yoros.cjb.net
  Socio HispaLinux #311
  Usuario Linux #275438 - http://counter.li.org
  GnuPG public information:  pub  1024D/74F1D3AC
  Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC
 
 De qué sirve firmar digitalmente tus mensajes, si no pones donde
 tienes la llave, no está en tu web, y tampoco está en los
 keyservers actuales (no al menos en los que recomienda GnuPG,
 www.keyserver.net y wwwkeys.eu.pgp.net)

Juer, pos yo juraría que subió.

-- 
Pedro Martinez Juliá
\  [EMAIL PROTECTED]
)|[EMAIL PROTECTED]
/http://yoros.cjb.net
Socio HispaLinux #311
Usuario Linux #275438 - http://counter.li.org
GnuPG public information:  pub  1024D/74F1D3AC
Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC


pgpghUgaDl9uC.pgp
Description: PGP signature

Re: HP deskjet y el nivel de tinta

[yoros]

On Mon, Oct 21, 2002 at 12:01:21AM +0200, Rafael C. Gawenda wrote:
 * [EMAIL PROTECTED] [EMAIL PROTECTED] [2002-10-20 23:24 (CEST)]
 
  Juer, pos yo juraría que subió.
 
 Ahora si

La he vuelto a mandar, y a los dos...

-- 
Pedro Martinez Juliá
\  [EMAIL PROTECTED]
)|[EMAIL PROTECTED]
/http://yoros.cjb.net
Socio HispaLinux #311
Usuario Linux #275438 - http://counter.li.org
GnuPG public information:  pub  1024D/74F1D3AC
Key fingerprint = 8431 7B47 D2B4 5A46 5F8E  534F 588B E285 74F1 D3AC


pgpJRuvsfDZUP.pgp
Description: PGP signature

Re: HP DeskJet no Debian 3

[Raphael Barreto]

On Wed, 18 Sep 2002 20:37:43 -0300
Nelson Luiz Campos [EMAIL PROTECTED] wrote:

O printtool não está encontrando nenhuma impressora em /dev/lp0, que é onde se 
encontra minha HP Deskjet 840.
Ele dá um erro dizendo que provavelmente meu kernel não está com suporte a 
porta paralela, porém ele está com o suporte incorporado.
A algo que eu esteja esquecendo ?
Obrigado.

 Quer ter seu próprio endereço na Internet?
 Garanta já o seu e ainda ganhe cinco e-mails personalizados.
 DomíniosBOL - http://dominios.bol.com.br
 
 Rafael;
 
   Qual a HP que vc tem ?
   Bom, use o programa printtool para inserir a impressora que vc
 tem e use tb o programa hpijs. Vai funcionar. :)
 
 apt-cache show printtool
 apt-cache show hpijs
 
 []'s,
 
 Still
 
 * Hoffice-Rafael Puyau ([EMAIL PROTECTED]) wrote:
  Pessoal ,
  
  Como faço pra instalar uma impressora HP DeskJet no Debian ?! Já baixei um
  pacote chamado djtools, mas não sei se somente ele resolve. Devo fazer
  alguma coisa depois de instalá-lo? Onde ?!
  
  Agradeço antecipadamente.
  
  
  Sds,
  Rafael
  
  
  -- 
  To UNSUBSCRIBE, email to [EMAIL PROTECTED]
  with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
  
 --
 Nelson Luiz Campos | I hear; I forget.
 Electrical Engineer| I see; I remember.
 Linux User #89621 UIN 11464303 | I do; I understand.
 gnupgID: 55577339 [EMAIL PROTECTED]   | Chinese Proverb
 


-- 
++
+ Raphael Barreto ([EMAIL PROTECTED]) +
++

Re: HP DeskJet no Debian 3

[Marcio Roberto Teixeira]

Olá

Suporte a lp, parport e parport_pc são necessários, quer built-ins no kernel, 
quer modularizados.

Se modularizado,

(root_$ modprobe lp

deve carregar tudo o que é necessário.

té + v

On Sat, 21 Sep 2002 05:42:45 -0300
Raphael Barreto [EMAIL PROTECTED] wrote:

 On Wed, 18 Sep 2002 20:37:43 -0300
 Nelson Luiz Campos [EMAIL PROTECTED] wrote:
 
 O printtool não está encontrando nenhuma impressora em /dev/lp0, que é onde 
 se encontra minha HP Deskjet 840.
 Ele dá um erro dizendo que provavelmente meu kernel não está com suporte a 
 porta paralela, porém ele está com o suporte incorporado.
 A algo que eu esteja esquecendo ?
 Obrigado.
 

Re: HP DeskJet no Debian 3

[Hoffice-Rafael Puyau]

Nelson,

Minha HP é uma HP Deskjet 3420.

[ ]'s




   
Nelson Luiz 
   
Campos   To: Hoffice-Rafael 
Puyau/BR/LA/[EMAIL PROTECTED]  
[EMAIL PROTECTED]   cc: Debian User Portuguese 
Mailing List   
.com.br  
debian-user-portuguese@lists.debian.org
Sent by: Subject: Re: HP DeskJet no Debian 
3   
Nelson Luiz 
   
Campos  
   
[EMAIL PROTECTED]  
   
o.com.br   
   

   

   
18/09/2002  
   
21:07   
   

   

   




Rafael;

 Qual a HP que vc tem ?
 Bom, use o programa printtool para inserir a impressora que vc
tem e use tb o programa hpijs. Vai funcionar. :)

apt-cache show printtool
apt-cache show hpijs

[]'s,

Still

* Hoffice-Rafael Puyau ([EMAIL PROTECTED]) wrote:
 Pessoal ,

 Como faço pra instalar uma impressora HP DeskJet no Debian ?! Já baixei
um
 pacote chamado djtools, mas não sei se somente ele resolve. Devo
fazer
 alguma coisa depois de instalá-lo? Onde ?!

 Agradeço antecipadamente.


 Sds,
 Rafael


 --
 To UNSUBSCRIBE, email to [EMAIL PROTECTED]
 with a subject of unsubscribe. Trouble? Contact
[EMAIL PROTECTED]

--
Nelson Luiz Campos | I hear; I forget.
Electrical Engineer| I see; I remember.
Linux User #89621 UIN 11464303 | I do; I understand.
gnupgID: 55577339 [EMAIL PROTECTED]   | Chinese Proverb


 File C.DTF not included with reply message 

Re: HP DeskJet no Debian 3

[Gabriel Elias de Aquino]

 Rafael;

   Qual a HP que vc tem ?
   Bom, use o programa printtool para inserir a impressora que vc
 tem e use tb o programa hpijs. Vai funcionar. :)

 apt-cache show printtool
 apt-cache show hpijs

 []'s,

 Still

 * Hoffice-Rafael Puyau ([EMAIL PROTECTED]) wrote:
  Pessoal ,
 
  Como faço pra instalar uma impressora HP DeskJet no Debian ?! Já baixei
  um pacote chamado djtools, mas não sei se somente ele resolve. Devo
  fazer alguma coisa depois de instalá-lo? Onde ?!
 
  Agradeço antecipadamente.
 
 
  Sds,
  Rafael

Isso também serve para configurar a impressora remota?? (com esse
printtool)??

Re: HP DeskJet no Debian 3

[Nelson Luiz Campos]

Gabriel;

Sim. O printtool serve para configurar impressoras remotas,
tanto smbfs quanto lpd.

[]'s,

Still

* Gabriel Elias de Aquino ([EMAIL PROTECTED]) wrote:
  Rafael;
 
  Qual a HP que vc tem ?
  Bom, use o programa printtool para inserir a impressora que vc
  tem e use tb o programa hpijs. Vai funcionar. :)
 
  apt-cache show printtool
  apt-cache show hpijs
 
  []'s,
 
  Still
 
  * Hoffice-Rafael Puyau ([EMAIL PROTECTED]) wrote:
   Pessoal ,
  
   Como faço pra instalar uma impressora HP DeskJet no Debian ?! Já baixei
   um pacote chamado djtools, mas não sei se somente ele resolve. Devo
   fazer alguma coisa depois de instalá-lo? Onde ?!
  
   Agradeço antecipadamente.
  
  
   Sds,
   Rafael
 
 Isso também serve para configurar a impressora remota?? (com esse
 printtool)??
 
 
 -- 
 To UNSUBSCRIBE, email to [EMAIL PROTECTED]
 with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
 
--
Nelson Luiz Campos | I hear; I forget.
Electrical Engineer| I see; I remember.
Linux User #89621 UIN 11464303 | I do; I understand.
gnupgID: 55577339 [EMAIL PROTECTED]   | Chinese Proverb


pgpy5oZzxYAo5.pgp
Description: PGP signature

Re: HP DeskJet no Debian 3

[Leandro A. F. Pereira]

On Wed, 18 Sep 2002 17:00:36 -0300
Hoffice-Rafael Puyau [EMAIL PROTECTED] wrote:

 Como  faço pra  instalar uma  impressora HP  DeskJet no  Debian ?!  Já
 baixei  um  pacote  chamado  djtools,  mas  não  sei  se  somente  ele
 resolve. Devo fazer alguma coisa depois de instalá-lo? Onde ?!

Instala o lprngtool (eu o uso aqui, mas minha impressora fica em
outra maquina,  que roda Windows;  mas eu tenho certeza  que ela
tem driver pra  HP Deskjet). E' facil de configurar  e testar se
ta' tudo OK :)

Tem outras alternativas, como cups etc...


-- 
 Leandro Pereira  (oO)   [EMAIL PROTECTED]
 www.mindcrisis.tk/||\ GPG key: 0x062E7976
Ás vezes você está discutindo com um imbecil...
e ele também. --Millôr Fernandes
.

Re: HP DeskJet 995c

[Guillaume DAVID - Debian User]

Olivier Crouzet wrote:

  On Tue, 2 Jul 2002 14:04:20 +0200
Guillaume DAVID - Debian User [EMAIL PROTECTED] wrote:

  
  
Bonjour,

je possde une imprimante hp deskjet995c connecte sur le port USB. Le 
priphrique est reconnu au dmarrage et se situe dans /dev/usb/lp0. J'
ai essay plusieurs choses pour la faire marcher : hpijs, hpoj, ... mais

impossible de la faire fonctionner normalement. La communication marche
: cat /dev/usb/lp0  /"un document" donne une impression mais n' ayant
pas de pilote l' imprimante donne n' importe quoi ( C normal avec cat ).
Pouvez-vous m' aider  rsoudre ce problme ?

Merci
Guillaume



  
  J'utilise une 940C qui marche parfaitement (sur port parallle, pas essay
l'USB). J'ai mis des filtres magicfilter sur

http://olivier.crouzet.free.fr/pub/hpdj940c

si tu veux essayer en les modifiant un peu. Il y a beaucoup d'infos aussi
sur :

http://hpinkjet.sourceforge.net

A part a, qu'est-ce qui ne marche pas exactement (rien ne sort, ca sort
mal ?)

Olivier.

  

La merde c' est que je n' arrive pas  la configurer et que pour lui envoyer
un fichier, j' utilise une commande, cat, qui n' est pas faite pour a, et
tant donn que je n' ait pas les drivers, je ne peut rien faire.

Guillaume

Re: HP DeskJet 995c

[Olivier Crouzet]

On Tue, 2 Jul 2002 14:04:20 +0200
Guillaume DAVID - Debian User [EMAIL PROTECTED] wrote:

 Bonjour,
 
 je possède une imprimante hp deskjet995c connectée sur le port USB. Le 
 périphérique est reconnu au démarrage et se situe dans /dev/usb/lp0. J'
 ai essayé plusieurs choses pour la faire marcher : hpijs, hpoj, ... mais
 
 impossible de la faire fonctionner normalement. La communication marche
 : cat /dev/usb/lp0  /un document donne une impression mais n' ayant
 pas de pilote l' imprimante donne n' importe quoi ( C normal avec cat ).
 Pouvez-vous m' aider à résoudre ce problème ?
 
 Merci
 Guillaume
 
 
J'utilise une 940C qui marche parfaitement (sur port parallèle, pas essayé
l'USB). J'ai mis des filtres magicfilter sur

http://olivier.crouzet.free.fr/pub/hpdj940c

si tu veux essayer en les modifiant un peu. Il y a beaucoup d'infos aussi
sur :

http://hpinkjet.sourceforge.net

A part ça, qu'est-ce qui ne marche pas exactement (rien ne sort, ca sort
mal ?)

Olivier.

-- 
  Olivier Crouzet
  Institut des Sciences Cognitives
  CNRS - Université Claude Bernard Lyon 1


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Jeremy T. Bouse]

Someone has probably already stated this but I have do have a
HP 610CL connect'd to one of my internal Debian machines running lprng
to handle print spooling from the other Debian and a couple Windows 2000
machines fine... 

I used lprngtool (1.1.1-6) and lprng (3.8.10-1) and their
dependencies to do this... The resulting printcap entry I'm using is:

##LPRNGTOOL## LOCAL cdj550 300x300 letter {} DeskJet550 3 1
lp|hp610c
:sd=/var/spool/lpd/lp
:sh
:mx=0
:af=/var/spool/lpd/lp/acct
:ml=0
:lf=/var/spool/lpd/lp/log
:cd=/var/spool/lpd/lp/
:cm=HP DeskJect 610C
:lp=/dev/lp0
:if=/usr/share/lprngtool/master-filter
:

The only other real change I made to the configuration of lprng
was to comment out the REJECT NOT SERVER line that the maintainer
places in there to stop any thing no locally generated and to add
ACCEPT SERVICE=R REMOTEIP=Internal LAN IP range before the REJECT
SERVICE=R FORWARD line to allow printing only from local network...

Jeremy

On Sun, May 12, 2002 at 01:12:52PM +0200, Bj?rn Lindstr?m wrote:
 Has anyone got the printer HP DeskJet 610C working in Debian?
 
 It is not listed by magicfilterconfig, so I have tried some
 other DeskJet filters, but none of them work.
 
 What do I do now?
 
 -- 
 Bj?rn Lindstr?m [EMAIL PROTECTED]  hem.fyristorg.com/bkhl/
 Ramsta Svista   Phone: +46 (0)18  398248
 SE-755 91  Uppsala --Mobile: +46 (0)73 6171268
 
 
 -- 
 To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
 with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]


pgpCsqKePzWnd.pgp
Description: PGP signature

Re: HP DeskJet 610C

[Ted]

Jeremy T. Bouse wrote:

Someone has probably already stated this but I have do have a
HP 610CL connect'd to one of my internal Debian machines running lprng
to handle print spooling from the other Debian and a couple Windows 2000
machines fine... 


I used lprngtool (1.1.1-6) and lprng (3.8.10-1) and their
dependencies to do this... The resulting printcap entry I'm using is:

##LPRNGTOOL## LOCAL cdj550 300x300 letter {} DeskJet550 3 1
lp|hp610c
:sd=/var/spool/lpd/lp
:sh
:mx=0
:af=/var/spool/lpd/lp/acct
:ml=0
:lf=/var/spool/lpd/lp/log
:cd=/var/spool/lpd/lp/
:cm=HP DeskJect 610C
:lp=/dev/lp0
:if=/usr/share/lprngtool/master-filter
:

The only other real change I made to the configuration of lprng
was to comment out the REJECT NOT SERVER line that the maintainer
places in there to stop any thing no locally generated and to add
ACCEPT SERVICE=R REMOTEIP=Internal LAN IP range before the REJECT
SERVICE=R FORWARD line to allow printing only from local network...

Jeremy

On Sun, May 12, 2002 at 01:12:52PM +0200, Bj?rn Lindstr?m wrote:


Has anyone got the printer HP DeskJet 610C working in Debian?

It is not listed by magicfilterconfig, so I have tried some
other DeskJet filters, but none of them work.

What do I do now?

--
Bj?rn Lindstr?m [EMAIL PROTECTED]  hem.fyristorg.com/bkhl/
Ramsta Svista   Phone: +46 (0)18  398248
SE-755 91  Uppsala --Mobile: +46 (0)73 6171268


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]


g


HI ..
I set my 610 up with printtool and it is first rate..Far better than it 
worked in xp pro..


##PRINTTOOL3## LOCAL cdj670 600x600 letter {} HPDeskJet610C Default {}
 is what it is setup as
--
Regards
  Ted Wager
   Libranet Linux user


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Mario Vukelic]

On Sun, 2002-05-12 at 13:12, Björn Lindström wrote:
 Has anyone got the printer HP DeskJet 610C working in Debian?
 
 It is not listed by magicfilterconfig, so I have tried some
 other DeskJet filters, but none of them work.
 
 What do I do now?

You could try to use CUPS
-- 

I did not vote for the Austrian government




--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Andreas Eichner]

Am Sonntag, 12. Mai 2002 13:12 schrieb Björn Lindström:
 Has anyone got the printer HP DeskJet 610C working in Debian?

I have an HP Deskjet 615C. Works fine with CUPS and it's filters for the 
Deskjet 670. May also work with your 610C. Test it.

Have fun!


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Ted]

Björn Lindström wrote:


Has anyone got the printer HP DeskJet 610C working in Debian?

It is not listed by magicfilterconfig, so I have tried some
other DeskJet filters, but none of them work.

What do I do now?




Hi..
I have my hp610c working using printtool..It is better in linux than xp 
pro...First class colour and layout


--
Regards
  Ted Wager
   Libranet Linux user


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[andrej hocevar]

On Sun, May 12, 2002 at 01:12:52PM +0200, Bj?rn Lindstr?m wrote:
 Has anyone got the printer HP DeskJet 610C working in Debian?
 
 It is not listed by magicfilterconfig, so I have tried some
 other DeskJet filters, but none of them work.

Yes, I have one, works well with the dj690c filter. However, I used
to have two filters for that one installed (the other one being
dj550c) -- just until now! Once my friend I share the flat with (and
that printer on our small network) discovered it won't print plain 
text. With the other filter we could print plain text as well. 
Since we also have a Laserjet III, I didn't bother much -- but now
in reply to your answer I've checked the magicfilters. Compare the
last lines of /etc/magicfilter/dj550c-filter and dj690c-filter:
you'll see the 690 uses djscript for plain text while the other
doesn't -- and it wasn't installed. :)
You can experiment with different filters, more will work. Since I
print mostly .dvi and .ps files, I've found out that prints with the
dj690c filter were better aligned.

ps: Works with lpr(ng)

andrej


-- 
echo ${girl_name}  /etc/dumpdates


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[andrej hocevar]

On Sun, May 12, 2002 at 08:15:16PM +0200, Mario Vukelic wrote:
 You could try to use CUPS

Could someone tell me why use CUPS instead of lpr/lprng? 

Based on my experience one can configure and adjust some programs
more easily than others -- so you use those you can figure out,
right? Unless of course, you need some features included only in
some other program, you'll be happy with a working computer. I've
never had problems with lpr/lprng. So which are the main reasons for
choosing CUPS? 
Since you were answering someone trying to set things up, would it
be the ease of configuration? 

N.B.: I have had no problems with lpr/lprng. (See my previous mail.)

andrej

-- 
echo ${girl_name}  /etc/dumpdates


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Kevin C. Smith]

On Sun, May 12, 2002 at 01:12:52PM +0200, Bj?rn Lindstr?m wrote:
 Has anyone got the printer HP DeskJet 610C working in Debian?
 
 It is not listed by magicfilterconfig, so I have tried some
 other DeskJet filters, but none of them work.
 
 What do I do now?
 

If you wish to use magicfilter: choose the hp550 filter. It works fine.

Or you can use lprngtool, and set your printcap up with that. It also
work fine. Just switched to using lprngtool a week ago with the same
printer. Used magicfilter before.

-- 
Kevin C. Smith   | A Society that will trade a little liberty for a
[EMAIL PROTECTED]| little order will lose both, and deserve neither.
Debian GNU/Linux (sid)   |-- Thomas Jefferson


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Joachim Fahnenmueller]

On Sun, May 12, 2002 at 01:12:52PM +0200, Björn Lindström wrote:
 Has anyone got the printer HP DeskJet 610C working in Debian?
 
 It is not listed by magicfilterconfig, so I have tried some
 other DeskJet filters, but none of them work.
 
 What do I do now?

Hi Björn,

I got it with apsfilter (IIRC the driver for HP DJ 670). Far better, though not 
free software, is turboprint (http://www.turboprint.de). With this, the printer 
works even much better than in windoze.

HTH, Joachim

-- 
Joachim Fahnenmüller
Lehrer für Mathematik und Physik

Herder-Gymnasium
Kattowitzer Straße 52
51065 Köln


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[dman]

On Sun, May 12, 2002 at 01:12:52PM +0200, Björn Lindström wrote:
| Has anyone got the printer HP DeskJet 610C working in Debian?

Yep, it works quite well with CUPS and the cupsomatic-ppd package.
The only problem is a little clipping on the left margin.  I haven't
tried to work it out yet (and probably won't, it's not that big of a
deal in my situation).

-D

-- 

A)bort, R)etry, B)ang it with a large hammer
 
GnuPG key : http://dman.ddts.net/~dman/public_key.gpg



pgpJx7Krd9BmS.pgp
Description: PGP signature

Re: HP DeskJet 610C

[Ron Johnson]

On Sun, 2002-05-12 at 18:07, andrej hocevar wrote:
 On Sun, May 12, 2002 at 08:15:16PM +0200, Mario Vukelic wrote:
  You could try to use CUPS
 
 Could someone tell me why use CUPS instead of lpr/lprng? 

The web-based administration is very simple.
 
 Based on my experience one can configure and adjust some programs
 more easily than others -- so you use those you can figure out,
 right? Unless of course, you need some features included only in
 some other program, you'll be happy with a working computer. I've
 never had problems with lpr/lprng. So which are the main reasons for
 choosing CUPS? 
 Since you were answering someone trying to set things up, would it
 be the ease of configuration? 
 
 N.B.: I have had no problems with lpr/lprng. (See my previous mail.)

-- 
++
| Ron Johnson, Jr.Home: [EMAIL PROTECTED]|
| Jefferson, LA  USA  http://ronandheather.dhs.org:81|
||
| You ask us the same question every day, and we give you|
| the same answer every day.  Someday, we hope that you will |
| believe us...  |
|   Donald Rumsfeld, to a reporter   |
++


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 610C

[Mario Vukelic]

On Mon, 2002-05-13 at 01:07, andrej hocevar wrote:

 Based on my experience one can configure and adjust some programs
 more easily than others -- so you use those you can figure out,
 right?

Has been known to happen, yes

 So which are the main reasons for
 choosing CUPS? 
 Since you were answering someone trying to set things up, would it
 be the ease of configuration?

Partly yes. Web-based administration. Partly, because it was a driver
issue and CUPS can use gimp-print drivers. I don't know if lpr/lprng
can, but I know CUPS does.

-- 

I did not vote for the Austrian government




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 712c stops printing after few lines

[marshal]

 Rohan == Rohan Deshpande [EMAIL PROTECTED] writes:

Rohan Hi there, I have an HP DeskJet 712c, which works well with
Rohan the pnm2ppa filter.  However, for some reason the printer
Rohan bsaically 'freezes' and stops printing after a few lines
Rohan into documents.  I am not sure whether this is a CUPS error
Rohan or what, because syslog tells me that pnm2ppa successfully
Rohan rendered pixmaps, etc and the job was completed.  I'm using
Rohan Debian Unstable ATM.  Any tips?

Try looking into hpijs, which is HPs (now Free) driver for most of
their product line.  Works great with my HP deskjet 957c.  Duplexing,
high quality.  As good as Windows!  (But I wouldn't know as I've
never used it under Windows, or MacOS)

Also check out www.linuxprinting.org

Good Luck.

Marshal


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Re: HP DeskJet 632C - can't print

[Dimitri Maziuk]

* John R. Daily  ([EMAIL PROTECTED]) spake thusly:
 Never mind, finally got it to work with lpdomatic. Is foomatic
 really not packaged for Debian?

Save yourself the pain, install cups. Find the ppd for your printer,
and copy it over /etc/cups/ppd/yourprinter.ppd (IIR the path C).

Dima
-- 
The wombat is a mixture of chalk and clay used for respiration.  -- MegaHal

Re: HP DeskJet 632C - can't print

[John R. Daily]

Never mind, finally got it to work with lpdomatic. Is foomatic
really not packaged for Debian?

-John Daily
[EMAIL PROTECTED]

Re: HP DeskJet 670c

[Marcio China]

 Dany wrote:
 
 Oi Lista,
 
 Alguem me pode explicar (de perferencia tipo receita de bolo) como se
 configura a impressora HP Deskjet 670c no Debian Linux. Já procurei
 uns Howto's mas o maximo que consegui saber foi que é possivel
 instala-la no Linux.
 
 Talvez tenha procurado mal na Net, mas tambem não posso lá estar muito
 tempo ($$$).
 
 Obrigado.

Voce pode usar o cups para configurar a sua impressora, via linha de
comando ou pelo navegador web. Existem tambem front ends para ele, como
o kups para usarios kde.

Se voce nao tem preconceitos contra software nao GNU voce pode baixar o
turboprint, www.turboprint.de. Ele permite configurar muitas impressoras
jato de tinta inclusive com a opcao rascunho. Eu estou usando la em casa
feliz da vida com minha hp 840.

[]'s
-- 
*
* Marcio China * Empresa de Informatica e Informacao*
*   GNU/Linux user nº 186538   *  de Belo Horizonte - Prodabel S/A  *
*   [EMAIL PROTECTED]   *Diretoria de Infraestrutura *
*--** 
*Slackware 8.0 - Debian 2.2 *
* Valorize seu imposto. Use software livre! *
*
Mensagem em texto simples propositalmente sem acentos.

Re: HP DeskJet 670c

[Pedro Zorzenon Neto]

On Fri, Oct 05, 2001 at 03:04:47PM +0100, Dany wrote:
 Oi Lista,
 
 Alguem me pode explicar (de perferencia tipo receita de bolo) como se 
 configura a impressora HP Deskjet 670c no Debian Linux. Já procurei uns 
 Howto's mas o maximo que consegui saber foi que é possivel instala-la no 
 Linux.
 
 Talvez tenha procurado mal na Net, mas tambem não posso lá estar muito tempo 
 ($$$).
 
 Obrigado.

Vai então a receita (lembro de cabeça, pode ser que tenha algo errado)

Entre no dselect e instale os pacotes magicfilter e lprng.

depois, configure o magicfilter com o comando magicfilterconfig --force

escolha o nome da impressora, o nome abreviado, a porta (geralmente /dev/lp0)
escolha o driver dj690c-low para o econofast ou dj690c para normal

acho que é isso.

  Abraços
  Pedro

Re: HP DeskJet driver (hpijs)

[Stephen J . Thompson]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Have a look at the HP site and just download that proggie, the gs that is in 
unstable contains the drivers.

Regards,

Stephen.


On Monday 20 Aug 2001 2:30 am, Marshal Wong wrote:
 Carl Greco [EMAIL PROTECTED] writes:
  Has the HP DeskJet driver, hpijs, been included in gs, or gs-aladdin
  in testing or unstable?  I'm attempting to install lprng with
  magicfilter to serve a 895Cse printer under stable (potato).

 Not it testing, to what I know.  You can compile gs and hpijs from
 hand.  Look to

 http://ephishmsee.com/linux/

 for a HOWTO that I wrote on doing so.  It's for my mac, so you just
 have to make the adjustments for your system, i.e. leaving the
 --LITTLE-ENDIAN option on.  I'm using a 957c just fine now.

 good luck.

 Marshal

  If not, what would be the best alternate solution?
  --
  Carl Greco
  [EMAIL PROTECTED]
 
 
  --
  To UNSUBSCRIBE, email to [EMAIL PROTECTED]
  with a subject of unsubscribe. Trouble? Contact
  [EMAIL PROTECTED]
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE7gr85Pmm0AnNwb5MRAn0ZAJ0UfHCliplDTvwVIjl/ZFQe2Qyc0ACghMQB
ZFa+Ok5kdd+YFJP/ttDv9E4=
=TrOj
-END PGP SIGNATURE-

Re: HP DeskJet driver (hpijs)

[Marshal Wong]

Carl Greco [EMAIL PROTECTED] writes:

 Has the HP DeskJet driver, hpijs, been included in gs, or gs-aladdin
 in testing or unstable?  I'm attempting to install lprng with
 magicfilter to serve a 895Cse printer under stable (potato).  
 

Not it testing, to what I know.  You can compile gs and hpijs from
hand.  Look to

http://ephishmsee.com/linux/

for a HOWTO that I wrote on doing so.  It's for my mac, so you just
have to make the adjustments for your system, i.e. leaving the
--LITTLE-ENDIAN option on.  I'm using a 957c just fine now.

good luck.

Marshal

 If not, what would be the best alternate solution?
 -- 
 Carl Greco
 [EMAIL PROTECTED]
 
 
 -- 
 To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
 with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

RE: HP Deskjet 959C + PCL codes (w/ apsfilter)

[Lewis, James M.]

 -Original Message-
 From: Dominique Deleris [mailto:[EMAIL PROTECTED]
 Sent: Thursday, April 26, 2001 10:58 AM
 To: debian-user-list; [EMAIL PROTECTED]
 Subject: HP Deskjet 959C + PCL codes (w/ apsfilter)
 
 
 Hello people !
 
 I have a problem printing plain ASCII text to my printer:
 at the end of the printing job, the continue button is
 blinking, as long as I don't hit it.
 
 I am using apsfilter CVS version, and I have set up RECODE
 options as follows:
 RAW_PROLOGUE='\033k2G\033l2E\033a2L\033(s1Q'
 RAW_EPILOGUE='\033l1H'
 meaning that these escape codes are sent to the printer
 before and after the file to be printed.
 
 I've tried to replace \033l1H by \014 in RAW_EPILOGUE,
 but it does not change anything.
 
You might try
   \033l0H#eject page
(esc  el zero H)
or
   \033E\033%-12345X# printer reset and universal language exit

hth
jim

 Is there a PCL champion of the world in the mailing list
 contributors ?
 
 Thanks for your help and advices !
 
 Dominique
 
 
 -- 
 To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
 with a subject of unsubscribe. Trouble? Contact 
 [EMAIL PROTECTED]
 

Re: HP Deskjet 959C + PCL codes (w/ apsfilter)

[Shawn Yarbrough]

I saw this same problem with an HP 855Cse printer earlier this week.  I
experimentally discovered that the print job would print and complete normally
if the text file ended with a form feed (ctrl-L).

Later I fixed my problem for good by choosing a better magicfilter printer
driver.  The 855Cse was not directly supported so I was guessing at similar
drivers.


Shawn Yarbrough
[EMAIL PROTECTED]

Re: HP Deskjet 959C + PCL codes (w/ apsfilter)

[Dominique Deleris]

Lewis, James M. [EMAIL PROTECTED] writes:

  I am using apsfilter CVS version, and I have set up RECODE
  options as follows:
  RAW_PROLOGUE='\033k2G\033l2E\033a2L\033(s1Q'
  RAW_EPILOGUE='\033l1H'
  meaning that these escape codes are sent to the printer
  before and after the file to be printed.
  
  I've tried to replace \033l1H by \014 in RAW_EPILOGUE,
  but it does not change anything.
  
 You might try
\033l0H#eject page
 (esc  el zero H)
 or
\033E\033%-12345X# printer reset and universal language exit
 

Both options have no effect.

Any idea ?

I'd really like to have a fast, rough text printer (converting ASCII to PS
before printing is simply to slow :-(

Thanks

Re: HP DeskJet 932C Printer e-mail support

[DeskJet 930 Support]

Hi Dan,

Thanks for your e-mail.
Although this service is provided as a means of technical support for
our customers, we are not provided with the training that would enable 
us to respond to questions regarding the operation of specific software
applications. To obtain a detailed response to the specific issue you
have presented, you should contact the software manufacturer.

If you need further assistance, please use the reply feature to include
all previous correspondence because we have several technicians
answering messages.  For additional technical information,
troubleshooting information and software updates, please visit our
HP Customer Care web site at http://www.hp.com/support/deskjet.



Original message excluded:
--

Re: HP Deskjet 880C

[Sean Johnson]

I use an HP Deskjet 890c, and haven't had any problems. I've been using
the 
550c print filter, which tends to go a bit heavy on the ink, and the
color
quality isn't great, but I hardly ever print color. I think there is a
filter
out there specifically for the 8xx series, but I've lost the url and
haven't
gotten around to digging it up again.

Sean

Peter Eades wrote:
 
 I know there are tones of this type of question so I will just get on
 with it,
 Does anyone else use a HP DeskJet 880c, I have vanila slink with the
 proposed updates bits.
 Please tell me it is well supported by magic filter.
 Thanks
 Peter

Re: HP Deskjet 880C

[Paul Huygen]

Peter Eades wrote:

 Does anyone else use a HP DeskJet 880c, I have vanila slink with the
 proposed updates bits.
 Please tell me it is well supported by magic filter.

Sean Johnson [EMAIL PROTECTED] wrote:

 I use an HP Deskjet 890c [with] the 550c print filter, which tends to 
 go a bit heavy on the ink, and the color quality isn't great [..]. I
 think there is a filter out there specifically for the 8xx series [..]

If this deskjet is supported by the 550c driver, then it is surely
better supported by the HPLJ driver. This filter comes standard with the
Alladin ghostscript package in the non-free department of Slink. I use this
for my HP640? deskjet. However, I could not find a magicfilter filter for
this driver I modified an existing filter for my purposes.

Re: HP Deskjet 880C

[David Wright]

Quoting Sean Johnson ([EMAIL PROTECTED]):
 I use an HP Deskjet 890c, and haven't had any problems. I've been using
 the 
 550c print filter, which tends to go a bit heavy on the ink, and the
 color
 quality isn't great, but I hardly ever print color. I think there is a
 filter
 out there specifically for the 8xx series, but I've lost the url and
 haven't
 gotten around to digging it up again.

I'll just paste this back in (and I've deleted the original query):

--8

Date: Wed, 29 Sep 1999 14:40:51 +0100
Subject: Re: HP 890C printing

I use one or two extra options with my 895c, but also run it through
lpr/magic-filter so you'll have to extract the parameters from my
gs-aladdin filter file:

# PostScript

0   %!  filter  /usr/bin/gs  -q -dSAFER -dNOPAUSE \
-r300 -sDEVICE=hpdj -sModel=unspec -sColorMode=CMYK -sMediaType=plain \
-sPrintQuality=draft -sOutputFile=\|cat 13 - 31 12

0   \004%!  filter  /usr/bin/gs  -q -dSAFER -dNOPAUSE \
-r300 -sDEVICE=hpdj -sModel=unspec -sColorMode=CMYK -sMediaType=plain \
-sPrintQuality=draft -sOutputFile=\|cat 13 - 31 12

# PDF

0   %PDFfpipe   /usr/bin/gs  -q -dSAFER -dNOPAUSE \
-r300 -sDEVICE=hpdj -sModel=unspec -sColorMode=CMYK -sMediaType=plain\
 -sPrintQuality=draft -sOutputFile=\|cat 13 $FILE 31 12

I find the dj550c filter suggested earlier is far too inky. Change
draft to normal or best (and set up two queues) if you find draft
is *too* light. The last saves a lot of ink, though.

(One day I'll sit down and try to parse all that output redirection!)

Cheers,

--8

-- 
Email:  [EMAIL PROTECTED]   Tel: +44 1908 653 739  Fax: +44 1908 655 151
Snail:  David Wright, Earth Science Dept., Milton Keynes, England, MK7 6AA
Disclaimer:   These addresses are only for reaching me, and do not signify
official stationery. Views expressed here are either my own or plagiarised.

Re: HP Deskjet 880C

[Antonio Rodriguez]

I am attaching next an old message that will help you:
***

Hi,

Checking your printcap-file is the first thing.
For HP540 you should install the gs-alladin package and get the tar from
ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3 named hpdj-xxx-tar.gz. In there 
is a
good
filter file, which brings best results with Hp-printers (didnt have a better 
output
since
then).
I installed it myself this week, because I had problems with my HP600.

Now, that the way, your /etc/printcap-file should be:
lp|dj540|dj540:\
:lp=/dev/lp0:sd=/var/spool/lpd/dj540:\
:sh:pw#80:pl#72:px#1440:mx#0:\
:if=/etc/printfilter/if-hpdj-dj540:\
:af=/var/log/lp-acct:lf=/var/log/lp-errs:

The file /etc/printfilter/if-hpdj-dj540 is actually the filter-file I got out 
of the
hpdj-xxx-tar.gz
package (just moved and renamed it).
With this, qou can setup a printer for draft, normal and presentation quality, 
just by

changing the defaults in the filter file (the easiest way).

Regards,
KD
**

Sean Johnson wrote:

 I use an HP Deskjet 890c, and haven't had any problems. I've been using
 the
 550c print filter, which tends to go a bit heavy on the ink, and the
 color
 quality isn't great, but I hardly ever print color. I think there is a
 filter
 out there specifically for the 8xx series, but I've lost the url and
 haven't
 gotten around to digging it up again.

 Sean

 Peter Eades wrote:
 
  I know there are tones of this type of question so I will just get on
  with it,
  Does anyone else use a HP DeskJet 880c, I have vanila slink with the
  proposed updates bits.
  Please tell me it is well supported by magic filter.
  Thanks
  Peter

 --
 Unsubscribe?  mail -s unsubscribe [EMAIL PROTECTED]  /dev/null

Re: HP deskjet 695c

[ktb]

This link should help,

http://gatekeeper.picante.com/~gtaylor/pht/printer_list.cgi

Good Luck,
Kent



Richard Harran wrote:

 I have been recommended this printer (HP dj 695c).  However, the vendor
 does not know about linux support.  He claims that it is the same
 printer as the 690C (which is listed as supported ing the linux hardware
 howto), just with a restyled casing.  Does anyone know if this printer
 will work with debian?
 Cheers
 Rich

 --
 Unsubscribe?  mail -s unsubscribe [EMAIL PROTECTED]  /dev/null