[Declude.JunkMail] Counting Instances
I'm looking at spam like this (this is but a small piece) and wondering if there is a way to count the number of instances of a particular entry, the number of times a word or other feature appears in the body or other part of a message:="float:right" c /spaneaspan style="float:right" a /spanr Hspan style="float:right" l /spanomspan style="float:right" u /spane Ospan stylePerhaps something I missed, a new use of a old system or whole new system, something like: body 0 contains ='float CountInstances countfilter d:\IMail\Declude\Count.txt 40 0 0Where 40 instances of a single entry or 40 different entries in the same file, triggers the test. Thoughts/Reactions?Thanks,Dan
Re: [Declude.JunkMail] vary large large files
Roger, Are you getting a lot of mail inbound (Dictionary attack, etc)? What is being shown in the logs? Can you post a snippet? Is anything else out of the norm(CPU, etc)? To generate 750MB logs on log level low something has to be going on.. Darrell --- fpReview - The easy way to review false positives for Declude... http://www.invariantsystems.com Schmeits, Roger writes: We are getting very large dec.log logfiles on the spooler dir. In the neighborhood of 750 meg. Anybody seen this? The debug mode is not on and log level is set to low. LOGFILE e:\imail\spool\dec.log LOGLEVEL LOW #PID / PID DEBUG #EVENTLOG ON #LOG_OK NONE ## Roger Schmeits Sr. Network Engineer 101 South 42nd St. Omaha, NE 68131 http://www.clarksoncollege.edu (402) 552-2542 Office (800) 647-5500 Toll Free ## Disclaimer: The information contained in this e-mail is privileged and confidential and is intended only for the use of the addressee(s) indicated above. Use or disclosure of information e-mailed in error is respectfully prohibited. If you have received this e-mail in error, please contact the sender and immediately delete the original message. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
[Declude.JunkMail] vary large large files
We are getting very large dec.log logfiles on the spooler dir. In the neighborhood of 750 meg. Anybody seen this? The debug mode is not on and log level is set to low. LOGFILE e:\imail\spool\dec.log LOGLEVEL LOW #PID / PID DEBUG #EVENTLOG ON #LOG_OK NONE ## Roger Schmeits Sr. Network Engineer 101 South 42nd St. Omaha, NE 68131 http://www.clarksoncollege.edu (402) 552-2542 Office (800) 647-5500 Toll Free ## Disclaimer: The information contained in this e-mail is privileged and confidential and is intended only for the use of the addressee(s) indicated above. Use or disclosure of information e-mailed in error is respectfully prohibited. If you have received this e-mail in error, please contact the sender and immediately delete the original message.
RE: [Declude.JunkMail] vary large large files
We found it. There were some wrong paths in the global.cfg for some filters. It keet writing errors out to the decxxx.log file continuously hence the large log files. Thanks to David B. we came to a quick resolution. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darrell ([EMAIL PROTECTED]) Sent: Thursday, June 01, 2006 8:47 AM To: Declude.JunkMail@declude.com Subject: Re: [Declude.JunkMail] vary large large files Roger, Are you getting a lot of mail inbound (Dictionary attack, etc)? What is being shown in the logs? Can you post a snippet? Is anything else out of the norm(CPU, etc)? To generate 750MB logs on log level low something has to be going on.. Darrell --- fpReview - The easy way to review false positives for Declude... http://www.invariantsystems.com Schmeits, Roger writes: We are getting very large dec.log logfiles on the spooler dir. In the neighborhood of 750 meg. Anybody seen this? The debug mode is not on and log level is set to low. LOGFILE e:\imail\spool\dec.log LOGLEVEL LOW #PID / PID DEBUG #EVENTLOG ON #LOG_OK NONE ## Roger Schmeits Sr. Network Engineer 101 South 42nd St. Omaha, NE 68131 http://www.clarksoncollege.edu (402) 552-2542 Office (800) 647-5500 Toll Free ## Disclaimer: The information contained in this e-mail is privileged and confidential and is intended only for the use of the addressee(s) indicated above. Use or disclosure of information e-mailed in error is respectfully prohibited. If you have received this e-mail in error, please contact the sender and immediately delete the original message. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server
Hi Robert, All very good questions. The client is paying for piece work as opposed to an hourly rate so monitoring time spent against time billed is not a concern. Mostly they want to know if the developers are using the environment that has been provided to them. 2 SQL servers, 2 web servers, 2 application servers. Comments like did they just upload the new stuff the day before the deliverable date? Are they using the environment that was provided for 5 minutes a day or hours per day? I am thinking of it as more of a validation of the whole support environment for the developers rather than did they update/fix that web page. Monitoring the host machines via SNMP might be an idea. Any simple (but good) tool leap to mind? Thanks Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert E. Spivack Sent: Wednesday, May 31, 2006 7:01 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Lets start at the high-level: What question are you trying to answer? e.g: Are the developers spending enough time doing the work they should be doing? Are the developers doing things they should not be doing? Are the developers competent and performing their job properly? Are the developers hours spent working matching their timesheets/project sheets? Etc. There are different solutions depending upon your objectives. Note: Personally, for outsourcing I pay based on a project or deliverable so tracking time/usage is of no interest to me. I pay for a certain result and dont care if it takes an hour or a week to do it. Also, I audit the quality of the finished product/code/service, I dont care about the tools/methods used to reach that goal. In your case: Since you have a virtual server environment, you can also audit at the host level. E.g. you can run SNMP tools and measure traffic (bps and total bytes in/out) on the virtual network ports of the virtual machine to see the activity level. You can see the protocol (http, http, netbios, smb, etc.) to see what type of activity is flowing through the machine. If you run the tool in a virtual machine on the same physical host, it can use packet capture to fully analyze the traffic and not just SNMP/WMI. You might consider re-writing your outsourcing contract. You really shouldnt have to police the project/micromanage it. Afterall, management of outsourcing is the hidden cost that can eat you alive and remove any cost benefits so why allow yourself to fall into that black hole? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Wednesday, May 31, 2006 1:09 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server It is a dev/staging server running in a virtual server environment so I have to be a bit careful what I turn on or dont. I tried the auditing a file. Wow talk about generating Security Event Log records. I turned auditing on for two files bginfo.exe and its corresponding config.bgi file. Then I ran it to generate the background on file server. That simple little thing created 15 log entries. If we turn this on we are going to need something to parse the security log file as I can see that it is going to produce a HUGE amount traffic in there. Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Mickey Sent: Wednesday, May 31, 2006 3:34 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server You could also enable auditing in Windows to examine file level access, just r-click on any file/folder and select properties, click on the security tab then click advanced then click on the auditing tab. WARNING: auditing a lot of high-use files could strain the server That being said, your on a dev server so it should be alright, though I would keep the number of files youre auditing to a minimum or as small a group as possible Thanks, Shaun --- Shaun Mickey 270net Technologies Phone: 301.663.6000 x28 Fax: 301.663.4410 www.270net.com Internet/Technology Solutions for Business and Government --- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darin Cox Sent: Wednesday, May 31, 2006 3:16 PM To: Declude.JunkMail@declude.com Subject: Re: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Source code activity would be best analyzed with Visual SourceSafe or another code control system. For watching use of the sites for testing, etc. just enable logging for the virtual webs and run reports on the web traffic. Darin. - Original Message - From: Goran
Re: [Declude.JunkMail] Counting Instances
We're also looking for a solution to killing that kind of Spam. Thursday, June 1, 2006, 5:33:53 AM, Dan [EMAIL PROTECTED] wrote: D I'm looking at spam like this (this is but a small piece) and D wondering if there is a way to count the number of instances of a D particular entry, the number of times a word or other feature D appears in the body or other part of a message: D =float :right c /spaneaspan style D =float :right a /spanr Hspan style D =float :right l /spanomspan style D =float :right u /spane Ospan style D Perhaps something I missed, a new use of a old system or whole new system, something like: D body 0 contains ='float D CountInstances countfilterd:\IMail\Declude\Count.txt 400 0 D Where 40 instances of a single entry or 40 different entries in D the same file, triggers the test. Thoughts/Reactions? D Thanks, D Dan D Don Brown - Dallas, Texas USA Internet Concepts, Inc. [EMAIL PROTECTED] http://www.inetconcepts.net (972) 788-2364Fax: (972) 788-5049 --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server
MRTG is free but a pain to setup and reporting is limited. Some swear by Cacti, but setup is also complex. A reasonable cost effective tool is Paessler. Windows-specific, but well implemented and supported. http://www.paessler.com/ It has a packet capture mode (aka sniffer) which will do a lot more than just snmp counting and exports reports to pdf From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Thursday, June 01, 2006 10:04 AM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Hi Robert, All very good questions. The client is paying for piece work as opposed to an hourly rate so monitoring time spent against time billed is not a concern. Mostly they want to know if the developers are using the environment that has been provided to them. 2 SQL servers, 2 web servers, 2 application servers. Comments like did they just upload the new stuff the day before the deliverable date? Are they using the environment that was provided for 5 minutes a day or hours per day? I am thinking of it as more of a validation of the whole support environment for the developers rather than did they update/fix that web page. Monitoring the host machines via SNMP might be an idea. Any simple (but good) tool leap to mind? Thanks Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert E. Spivack Sent: Wednesday, May 31, 2006 7:01 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Lets start at the high-level: What question are you trying to answer? e.g: Are the developers spending enough time doing the work they should be doing? Are the developers doing things they should not be doing? Are the developers competent and performing their job properly? Are the developers hours spent working matching their timesheets/project sheets? Etc. There are different solutions depending upon your objectives. Note: Personally, for outsourcing I pay based on a project or deliverable so tracking time/usage is of no interest to me. I pay for a certain result and dont care if it takes an hour or a week to do it. Also, I audit the quality of the finished product/code/service, I dont care about the tools/methods used to reach that goal. In your case: Since you have a virtual server environment, you can also audit at the host level. E.g. you can run SNMP tools and measure traffic (bps and total bytes in/out) on the virtual network ports of the virtual machine to see the activity level. You can see the protocol (http, http, netbios, smb, etc.) to see what type of activity is flowing through the machine. If you run the tool in a virtual machine on the same physical host, it can use packet capture to fully analyze the traffic and not just SNMP/WMI. You might consider re-writing your outsourcing contract. You really shouldnt have to police the project/micromanage it. Afterall, management of outsourcing is the hidden cost that can eat you alive and remove any cost benefits so why allow yourself to fall into that black hole? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Wednesday, May 31, 2006 1:09 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server It is a dev/staging server running in a virtual server environment so I have to be a bit careful what I turn on or dont. I tried the auditing a file. Wow talk about generating Security Event Log records. I turned auditing on for two files bginfo.exe and its corresponding config.bgi file. Then I ran it to generate the background on file server. That simple little thing created 15 log entries. If we turn this on we are going to need something to parse the security log file as I can see that it is going to produce a HUGE amount traffic in there. Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Mickey Sent: Wednesday, May 31, 2006 3:34 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server You could also enable auditing in Windows to examine file level access, just r-click on any file/folder and select properties, click on the security tab then click advanced then click on the auditing tab. WARNING: auditing a lot of high-use files could strain the server That being said, your on a dev server so it should be alright, though I would keep the number of files youre auditing to a minimum or as small a group as possible Thanks, Shaun --- Shaun Mickey 270net Technologies Phone: 301.663.6000 x28 Fax: 301.663.4410 www.270net.com Internet/Technology Solutions for Business and Government
RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server
Ill second the recommendation for Paesslers PRTG product. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert E. Spivack Sent: Thursday, June 01, 2006 1:16 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server MRTG is free but a pain to setup and reporting is limited. Some swear by Cacti, but setup is also complex. A reasonable cost effective tool is Paessler. Windows-specific, but well implemented and supported. http://www.paessler.com/ It has a packet capture mode (aka sniffer) which will do a lot more than just snmp counting and exports reports to pdf From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Thursday, June 01, 2006 10:04 AM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Hi Robert, All very good questions. The client is paying for piece work as opposed to an hourly rate so monitoring time spent against time billed is not a concern. Mostly they want to know if the developers are using the environment that has been provided to them. 2 SQL servers, 2 web servers, 2 application servers. Comments like did they just upload the new stuff the day before the deliverable date? Are they using the environment that was provided for 5 minutes a day or hours per day? I am thinking of it as more of a validation of the whole support environment for the developers rather than did they update/fix that web page. Monitoring the host machines via SNMP might be an idea. Any simple (but good) tool leap to mind? Thanks Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert E. Spivack Sent: Wednesday, May 31, 2006 7:01 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Lets start at the high-level: What question are you trying to answer? e.g: Are the developers spending enough time doing the work they should be doing? Are the developers doing things they should not be doing? Are the developers competent and performing their job properly? Are the developers hours spent working matching their timesheets/project sheets? Etc. There are different solutions depending upon your objectives. Note: Personally, for outsourcing I pay based on a project or deliverable so tracking time/usage is of no interest to me. I pay for a certain result and dont care if it takes an hour or a week to do it. Also, I audit the quality of the finished product/code/service, I dont care about the tools/methods used to reach that goal. In your case: Since you have a virtual server environment, you can also audit at the host level. E.g. you can run SNMP tools and measure traffic (bps and total bytes in/out) on the virtual network ports of the virtual machine to see the activity level. You can see the protocol (http, http, netbios, smb, etc.) to see what type of activity is flowing through the machine. If you run the tool in a virtual machine on the same physical host, it can use packet capture to fully analyze the traffic and not just SNMP/WMI. You might consider re-writing your outsourcing contract. You really shouldnt have to police the project/micromanage it. Afterall, management of outsourcing is the hidden cost that can eat you alive and remove any cost benefits so why allow yourself to fall into that black hole? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Wednesday, May 31, 2006 1:09 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server It is a dev/staging server running in a virtual server environment so I have to be a bit careful what I turn on or dont. I tried the auditing a file. Wow talk about generating Security Event Log records. I turned auditing on for two files bginfo.exe and its corresponding config.bgi file. Then I ran it to generate the background on file server. That simple little thing created 15 log entries. If we turn this on we are going to need something to parse the security log file as I can see that it is going to produce a HUGE amount traffic in there. Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Mickey Sent: Wednesday, May 31, 2006 3:34 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server You could also enable auditing in Windows to examine file level access, just r-click on any file/folder and select properties, click on the security tab then click advanced then click on the auditing tab. WARNING: auditing a lot of high-use files could strain the server That being said, your on a dev server so it should be alright, though I would keep the number
RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server
We use PRTG here and it works quite well. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Marchette Sent: Thursday, June 01, 2006 4:25 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Ill second the recommendation for Paesslers PRTG product. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert E. Spivack Sent: Thursday, June 01, 2006 1:16 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server MRTG is free but a pain to setup and reporting is limited. Some swear by Cacti, but setup is also complex. A reasonable cost effective tool is Paessler. Windows-specific, but well implemented and supported. http://www.paessler.com/ It has a packet capture mode (aka sniffer) which will do a lot more than just snmp counting and exports reports to pdf From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Thursday, June 01, 2006 10:04 AM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Hi Robert, All very good questions. The client is paying for piece work as opposed to an hourly rate so monitoring time spent against time billed is not a concern. Mostly they want to know if the developers are using the environment that has been provided to them. 2 SQL servers, 2 web servers, 2 application servers. Comments like did they just upload the new stuff the day before the deliverable date? Are they using the environment that was provided for 5 minutes a day or hours per day? I am thinking of it as more of a validation of the whole support environment for the developers rather than did they update/fix that web page. Monitoring the host machines via SNMP might be an idea. Any simple (but good) tool leap to mind? Thanks Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert E. Spivack Sent: Wednesday, May 31, 2006 7:01 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Lets start at the high-level: What question are you trying to answer? e.g: Are the developers spending enough time doing the work they should be doing? Are the developers doing things they should not be doing? Are the developers competent and performing their job properly? Are the developers hours spent working matching their timesheets/project sheets? Etc. There are different solutions depending upon your objectives. Note: Personally, for outsourcing I pay based on a project or deliverable so tracking time/usage is of no interest to me. I pay for a certain result and dont care if it takes an hour or a week to do it. Also, I audit the quality of the finished product/code/service, I dont care about the tools/methods used to reach that goal. In your case: Since you have a virtual server environment, you can also audit at the host level. E.g. you can run SNMP tools and measure traffic (bps and total bytes in/out) on the virtual network ports of the virtual machine to see the activity level. You can see the protocol (http, http, netbios, smb, etc.) to see what type of activity is flowing through the machine. If you run the tool in a virtual machine on the same physical host, it can use packet capture to fully analyze the traffic and not just SNMP/WMI. You might consider re-writing your outsourcing contract. You really shouldnt have to police the project/micromanage it. Afterall, management of outsourcing is the hidden cost that can eat you alive and remove any cost benefits so why allow yourself to fall into that black hole? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Wednesday, May 31, 2006 1:09 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server It is a dev/staging server running in a virtual server environment so I have to be a bit careful what I turn on or dont. I tried the auditing a file. Wow talk about generating Security Event Log records. I turned auditing on for two files bginfo.exe and its corresponding config.bgi file. Then I ran it to generate the background on file server. That simple little thing created 15 log entries. If we turn this on we are going to need something to parse the security log file as I can see that it is going to produce a HUGE amount traffic in there. Goran Jovanovic Omega Network Solutions From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Mickey Sent: Wednesday, May 31, 2006 3:34 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server You could also enable auditing in Windows to examine file level access, just r-click on
RE: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server
/Auditing a Windows Server You could also enable auditing in Windows to examine file level access, just r-click on any file/folder and select properties, click on the security tab then click advanced then click on the auditing tab. WARNING: auditing a lot of high-use files could strain the server That being said, your on a dev server so it should be alright, though I would keep the number of files you?re auditing to a minimum or as small a group as possible Thanks, Shaun --- Shaun Mickey 270net Technologies Phone: 301.663.6000 x28 Fax: 301.663.4410 www.270net.com Internet/Technology Solutions for Business and Government --- From: [EMAIL PROTECTED] [ mailto:[EMAIL PROTECTED]] On Behalf Of Darin Cox Sent: Wednesday, May 31, 2006 3:16 PM To: Declude.JunkMail@declude.com Subject: Re: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Source code activity would be best analyzed with Visual SourceSafe or another code control system. For watching use of the sites for testing, etc. just enable logging for the virtual webs and run reports on the web traffic. Darin. - Original Message - From: Goran Jovanovic To: Declude.JunkMail@declude.com Sent: Wednesday, May 31, 2006 2:35 PM Subject: [Declude.JunkMail] OT: Monitoring/Auditing a Windows Server Hi All, This is definitely an off topic question. I have a client that wants to monitor what their outsourced developers are doing. The development is taking place in IIS, .Net Application Server and SQL 2000. They want to know generally speaking what they are doing. Are the development servers being used/tested? Would not have to report on what exactly is being changed etc but some sort of activity report. Does anyone know of anything that can report on this type of activity. Thanks Goran Jovanovic Omega Network Solutions __ NOD32 1.1573 (20060601) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com
[Declude.JunkMail] Windows Gui Ping
A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated.
Re: [Declude.JunkMail] Windows Gui Ping
Reply to: Kevin Re: [Declude.JunkMail] Windows Gui Ping on Thursday 2:22:21 PM www.tools4ever.com FreePing does this free. -- Roger Heath [EMAIL PROTECTED] www.rleeheath.com - Copy of Original Message(s): - A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
Re: [Declude.JunkMail] Windows Gui Ping
One that I used to use was in Men Mice Tools and the entire thing is very useful. Still use it at home a lot when I am doing certain things. Jay At 02:22 PM 6/1/2006 -0700, you wrote: A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Windows Gui Ping
Angry IP Scanner http://www.angryziber.com/ipscan/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Sent: Thursday, June 01, 2006 5:22 PM To: Declude.JunkMail@declude.com Subject: [Declude.JunkMail] Windows Gui Ping A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Windows Gui Ping
I use this. Does not need an install, runs from the EXE file. Very nice and easy Goran Jovanovic Omega Network Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:Declude.JunkMail- [EMAIL PROTECTED] On Behalf Of William Stillwell Sent: Thursday, June 01, 2006 5:45 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] Windows Gui Ping Angry IP Scanner http://www.angryziber.com/ipscan/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Sent: Thursday, June 01, 2006 5:22 PM To: Declude.JunkMail@declude.com Subject: [Declude.JunkMail] Windows Gui Ping A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Windows Gui Ping
Prestwood Ping Server is my choice. Can email/page notification. $30 US. D. At 02:49 PM 6/1/2006, you wrote: I use this. Does not need an install, runs from the EXE file. Very nice and easy Goran Jovanovic Omega Network Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:Declude.JunkMail- [EMAIL PROTECTED]] On Behalf Of William Stillwell Sent: Thursday, June 01, 2006 5:45 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] Windows Gui Ping Angry IP Scanner http://www.angryziber.com/ipscan/ From: [EMAIL PROTECTED] [ mailto:[EMAIL PROTECTED]] On Behalf Of Kevin Sent: Thursday, June 01, 2006 5:22 PM To: Declude.JunkMail@declude.com Subject: [Declude.JunkMail] Windows Gui Ping A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Windows Gui Ping
Yes! That is the one. Thank you and others who replied. At 02:44 PM 6/1/2006, you wrote: Angry IP Scanner http://www.angryziber.com/ipscan/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Sent: Thursday, June 01, 2006 5:22 PM To: Declude.JunkMail@declude.com Subject: [Declude.JunkMail] Windows Gui Ping A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. __ NOD32 1.1574 (20060601) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
RE: [Declude.JunkMail] Windows Gui Ping
+ Source Code Available + Free + You can write customized Plugins (Like Shares.Dll, Show all Windows Shares) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Goran Jovanovic Sent: Thursday, June 01, 2006 5:50 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] Windows Gui Ping I use this. Does not need an install, runs from the EXE file. Very nice and easy Goran Jovanovic Omega Network Solutions -Original Message- From: [EMAIL PROTECTED] [mailto:Declude.JunkMail- [EMAIL PROTECTED] On Behalf Of William Stillwell Sent: Thursday, June 01, 2006 5:45 PM To: Declude.JunkMail@declude.com Subject: RE: [Declude.JunkMail] Windows Gui Ping Angry IP Scanner http://www.angryziber.com/ipscan/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Sent: Thursday, June 01, 2006 5:22 PM To: Declude.JunkMail@declude.com Subject: [Declude.JunkMail] Windows Gui Ping A little off topic but I remember seeing a post in the past on a great ping program on the list but forgot the name. It'll ping a range of ips and report with it either live or not. Any feedback greatly apprecicated. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type unsubscribe Declude.JunkMail. The archives can be found at http://www.mail-archive.com.
