[Desktop-packages] [Bug 975588] Re: Copying plenty of pictures from a KODAK Easyshare mini M200 camera hangs and fails after timeout
http://www.freedesktop.org/wiki/Software/hal/ ** Changed in: hal (Ubuntu) Status: New => Invalid ** Changed in: gvfs (Ubuntu) Status: New => Incomplete ** Changed in: libgphoto2 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/975588 Title: Copying plenty of pictures from a KODAK Easyshare mini M200 camera hangs and fails after timeout Status in “gvfs” package in Ubuntu: Incomplete Status in “hal” package in Ubuntu: Invalid Status in “libgphoto2” package in Ubuntu: Incomplete Bug description: I have encountered the issue with a "KODAK EASYSHARE MINI Camera M200" camera on ubuntu 10.0.4 LTS (Lucid Lynx), but after searching with google I am quite sure that other models are also likely to be affected. Accessing with nautilus sometimes works, but then copying all photos to hard disk will result in a hang after some files have been copied slowly with some bursts where speed is high, later showing an error that the copy failed. Then the camera needs to be disconnected and reconnected first, before it can be accessed again. I think that the issue is caused by a deadlock somewhere in the driver for communicating with the camera and not caused by the application (FSpot, Nautilus) using the connection to the camera. If I connect the camera, I get asked if I want to start FSpot. When I ignore the dialog or click "Cancel" and just access with nautilus, the issue arises after copying some files. Even the preview won't show all pictures, but it is then still possible to start copying files and some of them are successfully copied before the copy hangs and times out. When the camera is mounted, df doesn't show the mounted directory and "cat /proc/partitions" doesn't show the camera. Is it somehow possible to access it like a USB hard drive, mount it and then use standard shell commands to copy/move files? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/975588/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 975588] Re: Copying plenty of pictures from a KODAK Easyshare mini M200 camera hangs and fails after timeout
is that problem solved now ? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/975588 Title: Copying plenty of pictures from a KODAK Easyshare mini M200 camera hangs and fails after timeout Status in “gvfs” package in Ubuntu: Incomplete Status in “hal” package in Ubuntu: Invalid Status in “libgphoto2” package in Ubuntu: Incomplete Bug description: I have encountered the issue with a "KODAK EASYSHARE MINI Camera M200" camera on ubuntu 10.0.4 LTS (Lucid Lynx), but after searching with google I am quite sure that other models are also likely to be affected. Accessing with nautilus sometimes works, but then copying all photos to hard disk will result in a hang after some files have been copied slowly with some bursts where speed is high, later showing an error that the copy failed. Then the camera needs to be disconnected and reconnected first, before it can be accessed again. I think that the issue is caused by a deadlock somewhere in the driver for communicating with the camera and not caused by the application (FSpot, Nautilus) using the connection to the camera. If I connect the camera, I get asked if I want to start FSpot. When I ignore the dialog or click "Cancel" and just access with nautilus, the issue arises after copying some files. Even the preview won't show all pictures, but it is then still possible to start copying files and some of them are successfully copied before the copy hangs and times out. When the camera is mounted, df doesn't show the mounted directory and "cat /proc/partitions" doesn't show the camera. Is it somehow possible to access it like a USB hard drive, mount it and then use standard shell commands to copy/move files? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/975588/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184086] [NEW] HUD can't find LibO menu entries after print preview
Public bug reported: Just after switch to print preview "mode" HUD cannot find any Libreoffice menu but menu is still working using mouse. When print preview is closed HUD is still "blind". Description:Ubuntu 12.04.2 LTS Release:12.04 libreoffice: Zainstalowana: 1:4.0.3-0ubuntu1~precise2 ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1184086 Title: HUD can't find LibO menu entries after print preview Status in “libreoffice” package in Ubuntu: New Bug description: Just after switch to print preview "mode" HUD cannot find any Libreoffice menu but menu is still working using mouse. When print preview is closed HUD is still "blind". Description: Ubuntu 12.04.2 LTS Release: 12.04 libreoffice: Zainstalowana: 1:4.0.3-0ubuntu1~precise2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1184086/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184085] [NEW] Xorg server crashes when drawing dashed circles
Public bug reported: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 All the data in the attached file; nevertheless, this is a -intel driver. Ubuntu 13.04 with gnome-shell. Thanks ** Affects: xorg-server (Ubuntu) Importance: Undecided Status: New ** Tags: regression-release ** Attachment added: "Xorg_crash_no_core.txt.gz" https://bugs.launchpad.net/bugs/1184085/+attachment/3686341/+files/Xorg_crash_no_core.txt.gz -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184085 Title: Xorg server crashes when drawing dashed circles Status in “xorg-server” package in Ubuntu: New Bug description: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 All the data in the attached file; nevertheless, this is a -intel driver. Ubuntu 13.04 with gnome-shell. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 553647] Re: xserver crash (repeatable, triggered by drawing circle/ellipse e.g. in xfig)
I have too this problem again. Opened a new bug: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184085 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/553647 Title: xserver crash (repeatable, triggered by drawing circle/ellipse e.g. in xfig) Status in “xorg-server” package in Ubuntu: Fix Released Status in “xorg-server” source package in Lucid: Fix Released Status in “xorg-server” source package in Maverick: Fix Released Bug description: [Impact] xfig is no longer as widely used an application as it once was, but regular application usage should not crash X. It may be an indication of a problem that other legacy apps have beyond xfig. [Development] The fix has been committed to the main ubuntu-x git branch, which will be used once Maverick Meerkat is open for development, thus this fix will automatically copy over into it. The patch is also included in Debian and upstream so we will get it automatically next time we merge this package from Debian. [Patch] Patch is taken directly from Debian. This is an upstream patch. http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=commit;h=94ccaae1ff45c11453141469f5659b6d2a16c4bf [Test Case] 1. Update Lucid to the latest version. Reboot and log into Gnome 2. Open xfig 3. Left click in drawing area once (to dismiss the xfig banner) 4. Press the 'c' key 5. Left click in the drawing area 6. Xserver instantly crashes (and is restarted by display manager). It should not crash at this point. [Regression Potential] Low. This is a pretty substantial patch at 887 lines, which addresses an issue in a lesser-used application, and so for those reasons I opted to wait on including it in the Lucid release itself, in the interest in seeing it get further testing time under its belt. Because Debian and X.org are including the patch, I am assuming it is safe and thus valid for consideration as a regular SRU. But because of the size of the patch, 'Low' is the best rating I can give it. Specific things I am concerned about: This patch drops several exa functions; are those functions in use by anything (like proprietary drivers, games, or other apps?) This patch changes fallback behavior which I gather does not get exercised except in certain cases; is it certain that sufficient testing has been done for those cases? I notice that part of the patch involves adding a number of null-ptr checks. If testing does reveal this patch causes a regression somewhere, a suggested Plan B would be to extract these checks and see if those alone are sufficient to solve this issue. [Original Report] Here is how to reliably and repeatably crash the X server. 1. Update Lucid to the latest version, as of 2009-04-01. Reboot and log into Gnome 2. Open xfig 3. Left click in drawing area once (to dismiss the xfig banner) 4. Press the 'c' key 5. Left click in the drawing area 6. Xserver instantly crashes (and is restarted by display manager). This process is reliably repeatable, and I have done so several times to gather the ltrace and straces attached. Some more details: * 'c' starts the Circle tool. You can click the circle tool button instead, and have the same result. * The ellipse tool has the same effect. However all other tools within xfig work just fine. * xfig itself doesn't appear to be dying: it is managing to save a "SAVE.fig" file. * How the %(&£"%$ is an application failure able to nuke the Xserver? Backtrace: 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80e937b] 1: /usr/bin/X (0x8048000+0x61c7d) [0x80a9c7d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x57e410] 3: /usr/lib/xorg/modules/libfb.so (fbPushFill+0xf9) [0x20b459] 4: /usr/lib/xorg/modules/libfb.so (fbPushImage+0xf2) [0x20b622] 5: /usr/lib/xorg/modules/libfb.so (fbPushPixels+0x78) [0x20b6b8] 6: /usr/bin/X (miPolyArc+0x159a) [0x8199aca] 7: /usr/lib/xorg/modules/libfb.so (fbPolyArc+0x8a) [0x1f90aa] 8: /usr/lib/xorg/modules/libexa.so (0x384000+0xf2dd) [0x3932dd] 9: /usr/bin/X (0x8048000+0xd9655) [0x8121655] 10: /usr/bin/X (0x8048000+0x282f9) [0x80702f9] 11: /usr/bin/X (0x8048000+0x2a477) [0x8072477] 12: /usr/bin/X (0x8048000+0x1ed7a) [0x8066d7a] 13: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x240bd6] 14: /usr/bin/X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xserver-xorg 1:7.5+3ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-16.25-generic Uname: Linux 2.6.32-16-generic i686 Architecture: i386 Date: Thu Apr 1 23:14:41 2010 DkmsStatus: Error: [Errno 2] No such file or directory InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta i386 (20100318) MachineType: LENOVO 200793G PccardctlIdent: Socket 0: no product info available Pccard
[Desktop-packages] [Bug 1184085] Re: Xorg server crashes when drawing dashed circles
** Description changed: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 + All the data in the attached file; nevertheless, this is a -intel + driver. Ubuntu 13.04 with gnome-shell. + Thanks -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184085 Title: Xorg server crashes when drawing dashed circles Status in “xorg-server” package in Ubuntu: New Bug description: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 All the data in the attached file; nevertheless, this is a -intel driver. Ubuntu 13.04 with gnome-shell. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184085] Re: Xorg server crashes when drawing dashed circles
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xorg-server (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184085 Title: Xorg server crashes when drawing dashed circles Status in “xorg-server” package in Ubuntu: Confirmed Bug description: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 All the data in the attached file; nevertheless, this is a -intel driver. Ubuntu 13.04 with gnome-shell. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184085] Re: Xorg server crashes when drawing dashed circles
I have the same problem with Ubuntu 13.04 (unity) 32 bit version. I found the same bug in Linux Mint 15 RC (cinnamon) 64 bit version. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184085 Title: Xorg server crashes when drawing dashed circles Status in “xorg-server” package in Ubuntu: Confirmed Bug description: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 All the data in the attached file; nevertheless, this is a -intel driver. Ubuntu 13.04 with gnome-shell. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 956893] Re: Tomboy slowly accumulates zombie children.
This bug is still present in 1.12.0-1ubuntu2 from Raring. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to tomboy in Ubuntu. https://bugs.launchpad.net/bugs/956893 Title: Tomboy slowly accumulates zombie children. Status in Tomboy: In Progress Status in “tomboy” package in Ubuntu: Triaged Bug description: The following was edited out of a `pstree -ca` dump: -tomboy /usr/lib/tomboy/Tomboy.exe |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-(sh) |-sh -c... | `-pxgsettings org.gnome.system.proxy org.gnome.system.proxy.httporg.gnome.system.proxy.https | |-{pxgsettings} | `-{pxgsettings} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} |-{tomboy} `-{tomboy} ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: tomboy 1.9.9-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-18.29-generic 3.2.9 Uname: Linux 3.2.0-18-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 1.94.1-0ubuntu2 Architecture: amd64 Date: Fri Mar 16 12:02:04 2012 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111011) ProcEnviron: LANGUAGE=en_GB:en TERM=screen PATH=(custom, user) LANG=en_GB.UTF-8 SHELL=bash SourcePackage: tomboy UpgradeStatus: Upgraded to precise on 2012-01-16 (60 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/tomboy/+bug/956893/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1127699] Re: Internal microphone does not working in Dell 3420 with Ubuntu Raring
On Vostro 3360 same problem System somehow detects 2 mics - Inetrnal Microphone and Microphone. Alsamixer shows that Microphone volume is 0, but increasing it does not help. By the way, alsa in 13.04 is glitchy - system sounds come with creaks and noises. lpspci output: 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Device 055c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d061 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1127699 Title: Internal microphone does not working in Dell 3420 with Ubuntu Raring Status in “pulseaudio” package in Ubuntu: Confirmed Bug description: Internal Microphone in Dell Inspiron 3420 a.k.a Dell Inspiron n4050 is not working with Ubuntu 13.04 - Raring Ringtail, no matter what I do. When I use the command line "alsamixer", the application doens't show the internal mic. Hardware: HDA Intel PCH * Ubuntu Version: 13.04 - Raring * pulseaudio: Installed: 1:3.0-0ubuntu1 Candidate: 1:3.0-0ubuntu1 Tabela de versão: *** 1:3.0-0ubuntu1 0 500 http://archive.ubuntu.com/ubuntu/ raring/main amd64 Packages 100 /var/lib/dpkg/status 1:3.0-0ubuntu1~ppa1 0 500 http://ppa.launchpad.net/ubuntu-audio-dev/ppa/ubuntu/ raring/main amd64 Packages ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-6.13-generic 3.8.0-rc7 Uname: Linux 3.8.0-6-generic x86_64 ApportVersion: 2.8-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kadu 2425 F pulseaudio kadu 4171 F alsamixer CheckboxSubmission: 07ad8fbd3cc6d6acbb7e0d79b517f671 CheckboxSystem: d00f84de8a555815fa1c4660280da308 Date: Sat Feb 16 23:06:21 2013 InstallationDate: Installed on 2013-02-16 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130214) MarkForUpload: True SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/28/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 04XGDT dmi.board.vendor: Dell Inc. dmi.board.version: A05 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA05:bd09/28/2012:svnDellInc.:pnInspiron3420:pvrNotSpecified:rvnDellInc.:rn04XGDT:rvrA05:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Inspiron 3420 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1127699/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1158735] Re: nautilus crashed with SIGSEGV in g_strdup()
** Changed in: nautilus (Ubuntu) Status: New => Confirmed ** Tags added: saucy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1158735 Title: nautilus crashed with SIGSEGV in g_strdup() Status in “nautilus” package in Ubuntu: Confirmed Bug description: nautilus crashed ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu11 ProcVersionSignature: Ubuntu 3.8.0-13.23-generic 3.8.3 Uname: Linux 3.8.0-13-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.9.2-0ubuntu2 Architecture: amd64 Date: Fri Mar 22 13:06:15 2013 ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'800x550+285+106'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'170' InstallationDate: Installed on 2013-03-21 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130321) MarkForUpload: True ProcCmdline: nautilus -n ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=hr_HR.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f82326b3c51:movdqu (%rdi),%xmm1 PC (0x7f82326b3c51) ok source "(%rdi)" (0x3ff0) not located in a known VMA region (needed readable region)! destination "%xmm1" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: nautilus StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libc.so.6 g_strdup () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () ?? () ?? () Title: nautilus crashed with SIGSEGV in g_strdup() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1158735/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1054257] Re: [fglrx] Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0
Same here with NVIDIA GeForce 9300M GS and Ubuntu 12.10. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1054257 Title: [fglrx] Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Status in Compiz: Incomplete Status in “compiz” package in Ubuntu: Incomplete Status in “fglrx-installer” package in Ubuntu: Incomplete Bug description: I have upgrade to Ubuntu 12.10 from Precise. Unity do not start. If i try to start from terminal i see this http://pastebin.com/nXUY8E4m I have proposed active More info: Compiz: 0.9.8.2+bzr3377-0ubuntu1 Unity: 6.6.0-0ubuntu1 Catalyst: 12.9 To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/1054257/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 542387] Re: Acer Aspire One D250 Internal microphone does not work on Lucid
*** This bug is a duplicate of bug 412862 *** https://bugs.launchpad.net/bugs/412862 The workoround posted: "Work-around: Install pavucontrol (Pulse Audio Volume Control), go to Input Devices, unlock the two channels, turn down one of the two channels." worked for me on my AspireOne D250 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-media in Ubuntu. https://bugs.launchpad.net/bugs/542387 Title: Acer Aspire One D250 Internal microphone does not work on Lucid Status in “gnome-media” package in Ubuntu: Confirmed Status in “pulseaudio” package in Ubuntu: Confirmed Bug description: Binary package hint: gnome-media Acer Aspire One D250 internal micrpone does not work. The model I'm using has a realtek ALC 272. ProblemType: Bug Architecture: i386 Date: Fri Mar 19 21:31:36 2010 DistroRelease: Ubuntu 10.04 ExecutablePath: /usr/bin/gnome-volume-control InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha i386 (20100312) Package: gnome-media 2.29.91-0ubuntu1 ProcEnviron: LANG=en_CA.utf8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-16.25-generic SourcePackage: gnome-media Uname: Linux 2.6.32-16-generic i686 XsessionErrors: (polkit-gnome-authentication-agent-1:1611): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (Do:1625): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (evolution:1722): camel-WARNING **: camel_exception_get_id called with NULL parameter. (evolution:1722): camel-WARNING **: camel_exception_get_id called with NULL parameter. (gksu:2701): Gdk-CRITICAL **: gdk_draw_pixbuf: assertion `GDK_IS_DRAWABLE (drawable)' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-media/+bug/542387/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1158735] Re: nautilus crashed with SIGSEGV in g_strdup()
SegvAnalysis: Segfault happened at: 0x7fb4c000c711 <__strlen_sse2_pminub+17>:movdqu (%rdi),%xmm1 PC (0x7fb4c000c711) ok source "(%rdi)" (0x3fe0) not located in a known VMA region (needed readable region)! destination "%xmm1" ok SegvReason: reading unknown VMA SourcePackage: nautilus --- Ubuntu Bug Squad volunteer triager http://wiki.ubuntu.com/BugSquad ** Attachment added: "_usr_bin_nautilus.1000.crash" https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1158735/+attachment/3686349/+files/_usr_bin_nautilus.1000.crash -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1158735 Title: nautilus crashed with SIGSEGV in g_strdup() Status in “nautilus” package in Ubuntu: Confirmed Bug description: nautilus crashed ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu11 ProcVersionSignature: Ubuntu 3.8.0-13.23-generic 3.8.3 Uname: Linux 3.8.0-13-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.9.2-0ubuntu2 Architecture: amd64 Date: Fri Mar 22 13:06:15 2013 ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'800x550+285+106'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'170' InstallationDate: Installed on 2013-03-21 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130321) MarkForUpload: True ProcCmdline: nautilus -n ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=hr_HR.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f82326b3c51:movdqu (%rdi),%xmm1 PC (0x7f82326b3c51) ok source "(%rdi)" (0x3ff0) not located in a known VMA region (needed readable region)! destination "%xmm1" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: nautilus StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libc.so.6 g_strdup () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () ?? () ?? () Title: nautilus crashed with SIGSEGV in g_strdup() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1158735/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1158735] Re: nautilus crashed with SIGSEGV in g_strdup()
pratically all dbgsym installed --- Ubuntu Bug Squad volunteer triager http://wiki.ubuntu.com/BugSquad -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1158735 Title: nautilus crashed with SIGSEGV in g_strdup() Status in “nautilus” package in Ubuntu: Confirmed Bug description: nautilus crashed ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu11 ProcVersionSignature: Ubuntu 3.8.0-13.23-generic 3.8.3 Uname: Linux 3.8.0-13-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.9.2-0ubuntu2 Architecture: amd64 Date: Fri Mar 22 13:06:15 2013 ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'800x550+285+106'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'170' InstallationDate: Installed on 2013-03-21 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130321) MarkForUpload: True ProcCmdline: nautilus -n ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=hr_HR.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f82326b3c51:movdqu (%rdi),%xmm1 PC (0x7f82326b3c51) ok source "(%rdi)" (0x3ff0) not located in a known VMA region (needed readable region)! destination "%xmm1" ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: nautilus StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libc.so.6 g_strdup () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () ?? () ?? () Title: nautilus crashed with SIGSEGV in g_strdup() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1158735/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1054257] Re: [fglrx] Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0
Found a fix for my problem and it now working. Overview of my problem: Ubuntu 12.10 + NVIDIA GeForce 9300 GS Unity do not start Ubuntu 12.10 + Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 What I did to solve this issue: re-installed the nvidia drivers following this tutorial: http://www.dedoimedo.com/computers/ubuntu-quetzal-nvidia.html sudo apt-get install build-essential linux-source uname-r sudo apt-get install linux-headers-`uname -r` sudo apt-get install nvidia-current sudo /sbin/lsmod | grep nvidia no nvidia found, so: sudo depmod -a sudo modprobe nvidia_current sudo /sbin/lsmod | grep nvidia now it is ok, with count 0 sudo /etc/init.d/lightdm restart unity is restored! yay! Hope this helps someone. J -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1054257 Title: [fglrx] Compiz (opengl) - Fatal: glXQueryExtensionsString is NULL for screen 0 Status in Compiz: Incomplete Status in “compiz” package in Ubuntu: Incomplete Status in “fglrx-installer” package in Ubuntu: Incomplete Bug description: I have upgrade to Ubuntu 12.10 from Precise. Unity do not start. If i try to start from terminal i see this http://pastebin.com/nXUY8E4m I have proposed active More info: Compiz: 0.9.8.2+bzr3377-0ubuntu1 Unity: 6.6.0-0ubuntu1 Catalyst: 12.9 To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/1054257/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1183794] Re: Libreoffice 4 Base: No report generation when sorting order
Juan José Magaña Redondo, thank you for reporting this and trying to help make Ubuntu better. However, the LibreOffice PPA is not a software package provided by the official Ubuntu repositories. Because of this the Ubuntu project can not support or fix your particular bug. Please report this bug to the provider of the software package. As per https://launchpad.net/~libreoffice/+archive/ppa : For questions and bugs with software in this PPA please contact LibreOffice Packaging https://launchpad.net/~libreoffice . If you are interested in learning more about software repositories and Ubuntu, check https://help.ubuntu.com/community/Repositories . Thank you for your understanding. Helpful bug reporting tips: https://help.ubuntu.com/community/ReportingBugs ** Changed in: libreoffice (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1183794 Title: Libreoffice 4 Base: No report generation when sorting order Status in “libreoffice” package in Ubuntu: Invalid Bug description: I'm using Ubuntu 12.04 precise (amd64) and the Libreoffice 4.0 ppa. However, the bug that I have encountered also takes place with the official deb packages from www.libreoffice.org. Every time I generate a report that is sorted alphabetically or in any way, I always get this: 24-may-2013 14:09:18 com.sun.star.wizards.db.DBMetaData$CommandObject GRAVE: null com.sun.star.uno.RuntimeException: [jni_uno bridge error] Java calling UNO method getByName: [map_to_uno():string] null-ref given! java stack trace: at com.sun.star.bridges.jni_uno.JNI_proxy.dispatch_call(Native Method) at com.sun.star.bridges.jni_uno.JNI_proxy.invoke(JNI_proxy.java:183) at com.sun.proxy.$Proxy17.getByName(Unknown Source) at com.sun.star.wizards.db.DBMetaData$CommandObject.(DBMetaData.java:305) at com.sun.star.wizards.db.DBMetaData.getCommandByName(DBMetaData.java:272) at com.sun.star.wizards.db.DBMetaData.getTableByName(DBMetaData.java:251) at com.sun.star.wizards.db.CommandMetaData.getColumnObjectByFieldName(CommandMetaData.java:146) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:182) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:149) at com.sun.star.wizards.report.ReportTextImplementation.reconnectToDatabase(ReportTextImplementation.java:286) at com.sun.star.wizards.report.Dataimport.importReportData(Dataimport.java:196) at com.sun.star.wizards.report.Dataimport.createReport(Dataimport.java:212) at com.sun.star.wizards.report.CallReportWizard$ReportWizardImplementation.trigger(CallReportWizard.java:104) at com.sun.star.bridges.jni_uno.JNI_proxy.dispatch_call(Native Method) at com.sun.star.bridges.jni_uno.JNI_proxy.invoke(JNI_proxy.java:183) at com.sun.proxy.$Proxy17.getByName(Unknown Source) at com.sun.star.wizards.db.DBMetaData$CommandObject.(DBMetaData.java:305) at com.sun.star.wizards.db.DBMetaData.getCommandByName(DBMetaData.java:272) at com.sun.star.wizards.db.DBMetaData.getTableByName(DBMetaData.java:251) at com.sun.star.wizards.db.CommandMetaData.getColumnObjectByFieldName(CommandMetaData.java:146) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:182) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:149) at com.sun.star.wizards.report.ReportTextImplementation.reconnectToDatabase(ReportTextImplementation.java:286) at com.sun.star.wizards.report.Dataimport.importReportData(Dataimport.java:196) at com.sun.star.wizards.report.Dataimport.createReport(Dataimport.java:212) at com.sun.star.wizards.report.CallReportWizard$ReportWizardImplementation.trigger(CallReportWizard.java:104) java.lang.NullPointerException at com.sun.star.wizards.db.CommandMetaData.getColumnObjectByFieldName(CommandMetaData.java:147) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:182) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:149) at com.sun.star.wizards.report.ReportTextImplementation.reconnectToDatabase(ReportTextImplementation.java:286) at com.sun.star.wizards.report.Dataimport.importReportData(Dataimport.java:196) at com.sun.star.wizards.report.Dataimport.createReport(Dataimpo
[Desktop-packages] [Bug 580225] Re: [gm45] Backlight sometimes stays off
Official support for Ubuntu 10.10 "Maverick Meerkat" ended on April 10, 2012. Official support for Ubuntu 11.04 "Natty Narwhal" ended on October 28, 2012. Official support for Ubuntu 10.04 LTS "Lucid Lynx" desktop edition and Ubuntu 11.10 "Oneiric Ocelot" ended on May 9, 2013. Simon K and anyone still experiencing this bug on a supported version of Ubuntu - please file a new bug report so that we can get a fresh set of logs. Also, please file different bugs for different hardware models. ** Changed in: xserver-xorg-video-ati (Ubuntu) Status: Confirmed => Invalid ** Changed in: xserver-xorg-video-intel (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/580225 Title: [gm45] Backlight sometimes stays off Status in “xserver-xorg-video-ati” package in Ubuntu: Invalid Status in “xserver-xorg-video-intel” package in Ubuntu: Invalid Bug description: Binary package hint: xserver-xorg-video-intel On my Lenovo X200 notebook (GM45 graphics), the backlight sometimes (not always -- maybe one fifth of the time or so) stays off after a suspend/resume cycle. In other words, the system resumes properly except that the backlight does not turn on (screen contents are dimly visible, unlocking the screen, typing, etc work fine). Doing "xset dpms force on" or "xset dpms force off" or pressing any of the brightness function keys has no effect. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xserver-xorg-video-intel 2:2.9.1-3ubuntu5 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 Architecture: amd64 Date: Thu May 13 14:41:22 2010 DkmsStatus: Error: [Errno 2] No such file or directory EcryptfsInUse: Yes InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100318) MachineType: LENOVO 7458B18 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=2430964c-21ce-442f-819c-e1fc1596711f ro quiet splash ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: xserver-xorg-video-intel dmi.bios.date: 03/10/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 6DET63WW (3.13 ) dmi.board.name: 7458B18 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6DET63WW(3.13):bd03/10/2010:svnLENOVO:pn7458B18:pvrThinkPadX200:rvnLENOVO:rn7458B18:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 7458B18 dmi.product.version: ThinkPad X200 dmi.sys.vendor: LENOVO glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: x86_64 kernel: 2.6.32-22-generic [lspci] 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) Subsystem: Lenovo Device [17aa:20e4] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/580225/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 909022] Re: Various akonadi processes use 100% CPU and 200% RAM at every KDE session startup
Yesterday I installed Kubuntu 13.04 and got the same problems as other users in this thread. First I thought it was caused by the relatively new Kubuntu version so I switched back to 12.04 LTS. This did not help, I got the same problem: CPU at 100% in 1-2 minutes 4GB ram filled up, after which swap memory (also 4G) was filled entirely. I then (using a laptop) found a way to not start akonadi and now my system is back to normal. It is strange since I did use 12.04 before and then this did not happen. Maybe since the latest KDE updates this was introduced. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to akonadi in Ubuntu. https://bugs.launchpad.net/bugs/909022 Title: Various akonadi processes use 100% CPU and 200% RAM at every KDE session startup Status in Akonadi - The PIM Storage Service: New Status in “akonadi” package in Ubuntu: Confirmed Bug description: On every KDE session startup, a bunch of akonadi-related processes are started. These start hogging the system CPU and RAM shortly after startup, and quickly tie up 100% CPU and 200% RAM (i.e. they use up almost 8G physical RAM and start chewing on swap as well!) In order not to have my 2-core 8G RAM machine completely bogged down by these processes, I have to kill the processes manually, else my session becomes unusable and I have to reset the machine. Ubuntu: up-to-date 11.10 To manage notifications about this bug go to: https://bugs.launchpad.net/akonadi/+bug/909022/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184113] [NEW] xorg and onbord intel fails
Public bug reported: after udating to 13.04 i can bot but gui isn't running i normally used gdm / lightdm nothing seems to work now. on normal startup i end up at a blue striped background that after a while fades to a complete black screen. (i think i got it back after an gdm update a while ago)i can switch to terminal and login as my user. i have tried a lot of things, tried to switch graphical display manager, tried to reinstall stuff like ubuntu-desktop and so on. When i run Recovery Mode, and try boot up in faillsafe graphics i get the message to choose what settings to use. (something like reset settings, summary of error ..) In this window i have no mouse, and i cannot navigate with the keyboard. lsb_release: Ubuntu 13.04 Release 13.04 xorg: Installed: 1:7.7+1ubuntu4 Candidate 1:7.7+1ubuntu4 Version table: *** 1:7.7+1ubuntu4 0 500 http://archive.ubuntu.com/ubuntu/ raring/main amd64 Packages 100 /var/lib/dpkg/status what to do? ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 CompizPlugins: [core,composite,opengl,cube,gnomecompat,rotate] Date: Sat May 25 12:06:46 2013 DistUpgraded: 2013-04-10 20:07:41,279 DEBUG enabling apt cron job DistroCodename: raring DistroVariant: ubuntu DkmsStatus: bbswitch, 0.6, 3.8.0-17-generic, x86_64: installed bbswitch, 0.6, 3.8.0-19-generic, x86_64: installed bbswitch, 0.6, 3.8.0-21-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:1af2] NVIDIA Corporation GT218M [GeForce G210M] [10de:0a74] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:1af2] InstallationDate: Installed on 2011-02-16 (828 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) MachineType: ASUSTeK Computer Inc. UL30VT MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=88b5c103-749e-4075-8a41-50dc5d43d4d2 ro quiet splash nomodeset video=uvesafb:mode_option=1366x768-24,mtrr=3,scroll=ywrap vt.handoff=7 SourcePackage: xorg UpgradeStatus: Upgraded to raring on 2013-04-10 (44 days ago) XorgConf: Section "Device" Identifier "intel Graphics" Driver "intel" Option "AccelMethod" "uxa" EndSection dmi.bios.date: 03/02/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UL30VT dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr210:bd03/02/2010:svnASUSTeKComputerInc.:pnUL30VT:pvr1.0:rvnASUSTeKComputerInc.:rnUL30VT:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: UL30VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.45+git20130516.acfbf394-0ubuntu0sarvatt~raring version.libgl1-mesa-dri: libgl1-mesa-dri 9.2.0~git20130521.b2938156-0ubuntu0sarvatt~raring version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.2.0~git20130521.b2938156-0ubuntu0sarvatt~raring version.xserver-xorg-core: xserver-xorg-core 2:1.13.4~git20130508+server-1.13-branch.10c42f57-0ubuntu0ricotz~raring version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.99+git20130315.3e5350be-0ubuntu0sarvatt version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.7+git20130521.abe85add-0ubuntu0sarvatt~raring version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7+git20130516.bf72ae1f-0ubuntu0sarvatt~raring xserver.bootTime: Sat May 25 11:40:07 2013 xserver.configfile: /etc/X11/xorg.conf xserver.errors: Failed to load /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so: libnvidia-tls.so.304.43: cannot open shared object file: No such file or directory Failed to load module "glx" (loader failed, 7) No devices detected. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.4~git20130508+server-1.13-branch.10c42f57-0ubuntu0ricotz~raring ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug gnome3-ppa possible-manual-nvidia-install raring third-party-packages ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1184113 Title: xorg and onbord intel fails Status
[Desktop-packages] [Bug 1184086] Re: HUD can't find LibO menu entries after print preview
Marek Wrzosek, thank you for reporting this and trying to help make Ubuntu better. However, the LibreOffice PPA is not a software package provided by the official Ubuntu repositories. Because of this the Ubuntu project can not support or fix your particular bug. Please report this bug to the provider of the software package. As per https://launchpad.net/~libreoffice/+archive/ppa : For questions and bugs with software in this PPA please contact LibreOffice Packaging https://launchpad.net/~libreoffice . If you are interested in learning more about software repositories and Ubuntu, check https://help.ubuntu.com/community/Repositories . Thank you for your understanding. Helpful bug reporting tips: https://help.ubuntu.com/community/ReportingBugs ** Changed in: libreoffice (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1184086 Title: HUD can't find LibO menu entries after print preview Status in “libreoffice” package in Ubuntu: Invalid Bug description: Just after switch to print preview "mode" HUD cannot find any Libreoffice menu but menu is still working using mouse. When print preview is closed HUD is still "blind". Description: Ubuntu 12.04.2 LTS Release: 12.04 libreoffice: Zainstalowana: 1:4.0.3-0ubuntu1~precise2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1184086/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184115] [NEW] Gimp doesn't have overlay-icon in window spread
Public bug reported: on Ubuntu 13.04 with Faenza Icon Theme, Gimp 2.8.4 doesn't have an overlay-icon (Emblem) on Window Spread but should have one like other programs ** Affects: gimp-help (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gimp-help in Ubuntu. https://bugs.launchpad.net/bugs/1184115 Title: Gimp doesn't have overlay-icon in window spread Status in “gimp-help” package in Ubuntu: New Bug description: on Ubuntu 13.04 with Faenza Icon Theme, Gimp 2.8.4 doesn't have an overlay-icon (Emblem) on Window Spread but should have one like other programs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gimp-help/+bug/1184115/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1183368] Re: EDITING: Find by format doesn't work with non-integer font sizes
** Tags removed: decimal font fractional noninteger sizes -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1183368 Title: EDITING: Find by format doesn't work with non-integer font sizes Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: New Bug description: Find by formatting doesn't return any results if a non-integer font size is returned. To reproduce: 1. Enter some text in font size 11pt 2. Enter some more text in font size 11.5pt 3. Open the Find & Replace dialog (CTRL+H) 4. Click More Options 5. Click Format 6. Enter 11.5pt into the Size box. 7. Click ok and then Find 8. Observe 'Search key not found' error Trying the same but entering 11pt at step 6 works fine so the problem seems to be specific to non-integer font sizes. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: libreoffice-writer 1:4.0.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Thu May 23 15:01:20 2013 MarkForUpload: True SourcePackage: libreoffice UpgradeStatus: Upgraded to raring on 2013-04-30 (23 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1183368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184115] Re: Gimp doesn't have overlay-icon in window spread
Thank you for reporting this bug. Could you please add a screenshot of this? ** Changed in: gimp-help (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gimp-help in Ubuntu. https://bugs.launchpad.net/bugs/1184115 Title: Gimp doesn't have overlay-icon in window spread Status in “gimp-help” package in Ubuntu: Incomplete Bug description: on Ubuntu 13.04 with Faenza Icon Theme, Gimp 2.8.4 doesn't have an overlay-icon (Emblem) on Window Spread but should have one like other programs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gimp-help/+bug/1184115/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1183368] Re: EDITING: Find by format doesn't work with non-integer font sizes
EliCoten, thank you for reporting this and helping make Ubuntu better. Unfortunately, this is unreproducible in Xubuntu as the Format option in Find & Replace was not found in More Options. Would you have an extension installed that provides this functionality? lsb_release -rd Description:Ubuntu 13.04 Release:13.04 apt-cache policy libreoffice-calc libreoffice-calc: Installed: 1:4.0.2-0ubuntu1 Candidate: 1:4.0.2-0ubuntu1 Version table: *** 1:4.0.2-0ubuntu1 0 500 http://us.archive.ubuntu.com/ubuntu/ raring/main amd64 Packages 100 /var/lib/dpkg/status ** Changed in: libreoffice (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1183368 Title: EDITING: Find by format doesn't work with non-integer font sizes Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: Incomplete Bug description: Find by formatting doesn't return any results if a non-integer font size is returned. To reproduce: 1. Enter some text in font size 11pt 2. Enter some more text in font size 11.5pt 3. Open the Find & Replace dialog (CTRL+H) 4. Click More Options 5. Click Format 6. Enter 11.5pt into the Size box. 7. Click ok and then Find 8. Observe 'Search key not found' error Trying the same but entering 11pt at step 6 works fine so the problem seems to be specific to non-integer font sizes. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: libreoffice-writer 1:4.0.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Thu May 23 15:01:20 2013 MarkForUpload: True SourcePackage: libreoffice UpgradeStatus: Upgraded to raring on 2013-04-30 (23 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1183368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 374101] Re: Brasero hangs at Normalizing tracks
Happens to me too on 13.04. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/374101 Title: Brasero hangs at Normalizing tracks Status in A disc burning application for gnome 2: Fix Released Status in “brasero” package in Ubuntu: Fix Released Bug description: Binary package hint: brasero After defining an audio project with a number of MP3 files, the "BURN" action does nothing. It says "Normalizing tracks" but nothing actually happens for more than 15 minutes. The CPU load stays low (should rise because normalisation requires both I/O and CPU resources). I would expect the project to be burnt onto an audio CD. Workaround: Disable the normalize plugin. ProblemType: Bug Architecture: amd64 DistroRelease: Ubuntu 9.04 ExecutablePath: /usr/bin/brasero NonfreeKernelModules: nvidia Package: brasero 2.26.1-0ubuntu1 ProcEnviron: LC_COLLATE=C LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: brasero Uname: Linux 2.6.28-12-generic x86_64 To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/374101/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 943663] Re: [needs-packaging] Request for libreoffice-help-tr Package
Hi, I just wanted to ping :) Regards, Zeki -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/943663 Title: [needs-packaging] Request for libreoffice-help-tr Package Status in “libreoffice” package in Ubuntu: Won't Fix Bug description: Hello, Turkish help package of LibreOffice is missing in the repos. [1- http://packages.ubuntu.com/oneiric/libreoffice-l10n-tr] It will be very nice to have Turkish embed help for LibreOffice. [2- https://translations.documentfoundation.org/tr/] TDF's (.deb)help packages cannto be installed due to the dependencies [3-http://download.documentfoundation.org/libreoffice/stable/3.5.0/deb/x86/LibO_3.5 .0_Linux_x86_helppack-deb_tr.tar.gz] 1-I am using 11.10 Oneric 2-LibreOffice 3.5 3- Having Turkish embed help in LibreOffice 4- Unfortunately l10n package has no tr-help Best regards, Zeki To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/943663/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1003057] Re: Windows disappear unexpectedly when switching application
*** This bug is a duplicate of bug 995916 *** https://bugs.launchpad.net/bugs/995916 ** This bug has been marked a duplicate of bug 995916 No launcher icon or Alt+Tab entry for Gimp windows -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/1003057 Title: Windows disappear unexpectedly when switching application Status in “gnome-terminal” package in Ubuntu: Confirmed Bug description: When working with some applications, after you switch between application the window of the firt application disappears and can't be reached again, although through ps command you can see that the application is still running. For example: 1.- Open DIA in Ubuntu 12.04 under Unity 3D 2.- Change window (go to Firefox, for example) 3.- Try to switch again to DIA (you can't) 4.- ps -elaf | grep dia (you'll see the application is still running) This have happened with many applications, as DIA, pgAdminIII, rapidsvn. Altought it doesn't happen with Firefox, Chromium, LibreOffice or Nautilus. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: dia 0.97.2-5 ProcVersionSignature: Ubuntu 3.2.0-24.38-generic 3.2.16 Uname: Linux 3.2.0-24-generic i686 ApportVersion: 2.0.1-0ubuntu7 Architecture: i386 Date: Tue May 22 14:20:46 2012 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) SourcePackage: dia UpgradeStatus: Upgraded to precise on 2012-05-01 (21 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1003057/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184115] Re: Gimp doesn't have overlay-icon in window spread
this is a screenshot, i've marked the Emblem on Filezilla and the missing one on Gimp ** Attachment added: "Screenshot" https://bugs.launchpad.net/ubuntu/+source/gimp-help/+bug/1184115/+attachment/3686439/+files/Arbeitsfl%C3%A4che%201_017.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gimp-help in Ubuntu. https://bugs.launchpad.net/bugs/1184115 Title: Gimp doesn't have overlay-icon in window spread Status in “gimp-help” package in Ubuntu: Incomplete Bug description: on Ubuntu 13.04 with Faenza Icon Theme, Gimp 2.8.4 doesn't have an overlay-icon (Emblem) on Window Spread but should have one like other programs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gimp-help/+bug/1184115/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 721786] Re: (Non-overlay) scroll-bar lacks sufficient contrast to easily identify its position in the scroll-track
Any news on Ayatana Design feedback? Is there a link to a relevant thread in their mailing list? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to light-themes in Ubuntu. https://bugs.launchpad.net/bugs/721786 Title: (Non-overlay) scroll-bar lacks sufficient contrast to easily identify its position in the scroll-track Status in Ayatana Design: New Status in One Hundred Paper Cuts: Incomplete Status in Light Themes: Incomplete Status in “light-themes” package in Ubuntu: Incomplete Bug description: Binary package hint: gnome-session The scroll-bars that appear on the right-side and bottom of gnome windows lack sufficient contrast to the scroll-track. I have difficulty identifying where in the scroll-track the bar is positioned. I often mistake the background of the scroll-track as the scroll-bar itself. I'm using Inverted Control theme. More contrast and better color separation is needed here. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: gnome-session-bin 2.30.0-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12 Uname: Linux 2.6.32-28-generic i686 Architecture: i386 Date: Sat Feb 19 09:19:22 2011 ExecutablePath: /usr/bin/gnome-session InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release i386 (20100816.1) ProcEnviron: LC_TIME=en_GB.UTF-8 LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: gnome-session XsessionErrors: (polkit-gnome-authentication-agent-1:1387): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-design/+bug/721786/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1183968] Re: Idea: Dump Folders
Okay, I reported the idea to GNOME bugzilla. https://bugzilla.gnome.org/show_bug.cgi?id=701000 Bug #: 701000 ** Bug watch added: GNOME Bug Tracker #701000 https://bugzilla.gnome.org/show_bug.cgi?id=701000 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1183968 Title: Idea: Dump Folders Status in “nautilus” package in Ubuntu: New Bug description: I have an idea for a new feature in Nautilus. This feature is the ability for a user a right-click a selection of many folders. The user can then click "Dump Folders". This will tell Nautilus to move the files out of the folders to the root location of these folders and then delete the folders. For example, if I have hundreds of folders in ./Downloads, I could dump the folders and the files inside would all be placed in the "Downloads" folders. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1183968/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 824140] Re: Boot stops after "checking battery state..."
I have this bug on Ubuntu 13.04 fresh installation, although I did not have it in 12.10. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/824140 Title: Boot stops after "checking battery state..." Status in Light Display Manager: Confirmed Status in “lightdm” package in Ubuntu: Confirmed Bug description: It's actually a duplicate of bug #577477, but in Ubuntu 11.10 Alpha ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: gdm 3.0.4-0ubuntu6 ProcVersionSignature: Ubuntu 3.0.0-8.10-generic-pae 3.0.1 Uname: Linux 3.0.0-8-generic-pae i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Wed Aug 10 21:16:55 2011 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Alpha i386 (20110302) ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gdm UpgradeStatus: Upgraded to oneiric on 2011-08-10 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/824140/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1171702] Re: Screen freezes when trying to move icons in Unity's launcher
Fix in #3 worked for me too on an Intel integrated graphis laptop. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1171702 Title: Screen freezes when trying to move icons in Unity's launcher Status in “mesa” package in Ubuntu: Confirmed Bug description: A recent upgrade of Unity seems to have introduced a crippling bug whereby the screen locks up whenever left-click is held down on an icon in the launcher so that icons can be moved around. The cursor can still move but the rest of the desktop doesn't update, with flickering happening on occasion. Nothing short of forcing a reboot has been able to get around this. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Tue Apr 23 00:41:19 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu ExtraDebuggingInterest: No GpuHangFrequency: Continuously GpuHangReproducibility: Yes, I can easily reproduce it GpuHangStarted: Within the last few days GraphicsCard: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller]) Subsystem: Device [0537:2852] Subsystem: Device [0537:2852] InstallationDate: Installed on 2013-04-03 (20 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130402.1) MachineType: IEC PineTrail MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=c23d93a2-0f6e-4044-bbfa-7a80b75097eb ro quiet splash SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) XorgLogOld: dmi.bios.date: 10/27/2010 dmi.bios.vendor: IEC dmi.bios.version: 0.08 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Base Board Product Name dmi.board.vendor: IEC dmi.board.version: Base Board Version dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnIEC:bvr0.08:bd10/27/2010:svnIEC:pnPineTrail:pvr0.08:rvnIEC:rnBaseBoardProductName:rvrBaseBoardVersion:cvnChassisManufacturer:ct1:cvrChassisVersion: dmi.product.name: PineTrail dmi.product.version: 0.08 dmi.sys.vendor: IEC version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.43-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.1-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.1-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 xserver.bootTime: Tue Apr 23 00:38:15 2013 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.3-0ubuntu6 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1171702/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1181509] Re: can not install new updates
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please answer these questions: * Is this reproducible? * If so, what specific steps should we take to recreate this bug? This will help us to find and resolve the problem. ** Package changed: seahorse (Ubuntu) => update-manager (Ubuntu) ** Changed in: update-manager (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to seahorse in Ubuntu. https://bugs.launchpad.net/bugs/1181509 Title: can not install new updates Status in “update-manager” package in Ubuntu: Incomplete Bug description: my laptop does not install any new updates in the update manager To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/1181509/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184115] Re: Gimp doesn't have overlay-icon in window spread
I don't think this is a GIMP bug, this must have to do with the Faenza Icon Theme, what is not in our archive. What I don't understand why there are emblems, with the standard Ubuntu icons there are no emblems or? ** Package changed: gimp-help (Ubuntu) => ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gimp-help in Ubuntu. https://bugs.launchpad.net/bugs/1184115 Title: Gimp doesn't have overlay-icon in window spread Status in Ubuntu: Incomplete Bug description: on Ubuntu 13.04 with Faenza Icon Theme, Gimp 2.8.4 doesn't have an overlay-icon (Emblem) on Window Spread but should have one like other programs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1184115/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1150956] Re: LibreOffice Calc's RATE function sometimes produces incorrect results!!!
F.H., regarding your comments https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1150956/comments/4 : >"...and on Microsoft Excel:" What specific version of Excel? >" =RATE(50,35,-250,0)" Unfortunately, this was not a different, exact command as previously requested in https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1150956/comments/3 . -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1150956 Title: LibreOffice Calc's RATE function sometimes produces incorrect results!!! Status in “libreoffice” package in Ubuntu: Incomplete Bug description: STEPS TO REPRODUCE: Type "=RATE(50,35,-250,0)" on any cell, and press Enter. The result should be 0.1398, but LibreOffice shows -1.9474! ADDITIONAL INFORMATION: I'm using LibreOffice 3.5.7.2, Build ID: 350m1(Build:2), on Ubuntu 12.04, 64-bit version, with up-to-date packages. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1150956/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1142213] Re: emacs23/24 and other GTK applications do not start when run in Kubuntu 13.04 with oxygen-gtk theme enabled
** Bug watch added: Debian Bug tracker #707699 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707699 ** Also affects: gtk2-engines-oxygen (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707699 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk2-engines-oxygen in Ubuntu. https://bugs.launchpad.net/bugs/1142213 Title: emacs23/24 and other GTK applications do not start when run in Kubuntu 13.04 with oxygen-gtk theme enabled Status in GNU Emacs: Fix Released Status in “emacs23” package in Ubuntu: Confirmed Status in “emacs24” package in Ubuntu: Confirmed Status in “gtk2-engines-oxygen” package in Ubuntu: Confirmed Status in “oxygen-gtk3” package in Ubuntu: Confirmed Status in “gtk2-engines-oxygen” package in Debian: Unknown Bug description: If I try to run emacs23 in Kubuntu 13.04, (KDE 4.10.0) I am finding that the GUI starts only some of the time. If the GUI doesn't start then I will only see a process running in htop or similar. Starting emacs in a terminal window with the -nw argument or installing the Lucid interface shows that emacs does run each time it starts so the problem is either with the emacs GTK interface or the GTK libraries. Emacs24 exhibits the same problem. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: emacs23 (not installed) ProcVersionSignature: Ubuntu 3.8.0-9.18-generic 3.8.1 Uname: Linux 3.8.0-9-generic x86_64 ApportVersion: 2.9-0ubuntu2 Architecture: amd64 Date: Sun Mar 3 14:19:01 2013 InstallationDate: Installed on 2013-01-05 (57 days ago) InstallationMedia: Kubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130104) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en TERM=screen-256color PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: emacs23 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/emacs/+bug/1142213/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1112496] Re: python-imaging broken in raring
#39 - solution worked for me too -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gwibber in Ubuntu. https://bugs.launchpad.net/bugs/1112496 Title: python-imaging broken in raring Status in Phatch = Photo & Batch!: New Status in “comix” package in Ubuntu: Invalid Status in “gwibber” package in Ubuntu: Invalid Status in “ocrfeeder” package in Ubuntu: Invalid Status in “phatch” package in Ubuntu: Confirmed Status in “python-imaging” package in Ubuntu: Fix Released Status in “simple-image-reducer” package in Ubuntu: Invalid Status in “wsjt” package in Ubuntu: Invalid Status in “comix” source package in Raring: Invalid Status in “gwibber” source package in Raring: Invalid Status in “ocrfeeder” source package in Raring: Invalid Status in “phatch” source package in Raring: Confirmed Status in “python-imaging” source package in Raring: Fix Released Status in “simple-image-reducer” source package in Raring: Invalid Status in “wsjt” source package in Raring: Invalid Bug description: python-imaging in raring doesn't include a PIL.pth to point python at the library, so attempts to import modules from the package fail with, eg: rachel@rarity:/etc$ python -m ImageMode && echo ok /usr/bin/python: No module named Image When the PIL.pth file is manually created, so python can find it, the Image module itself still fails to load: rachel@rarity:/etc$ python -m Image Traceback (most recent call last): File "/usr/lib/python2.7/runpy.py", line 162, in _run_module_as_main "__main__", fname, loader, pkg_name) File "/usr/lib/python2.7/runpy.py", line 72, in _run_code exec code in run_globals File "/usr/lib/python2.7/dist-packages/PIL/Image.py", line 75, in from . import ImageMode ValueError: Attempted relative import in non-package The ImageMode module that line seems to be trying to import, however, seems to import fine by itself: rachel@rarity:/etc$ python -m ImageMode && echo ok ok (I've confirmed that ImageMode comes from the same place, as if I remove PIL.pth again, the above line just returns the "No module named ImageMode" error) I've tried reinstalling python-imaging already. I note in any case the PIL.pth file is missing on the file list available at packages.ubuntu.com for raring. This is on Ubuntu Raring as updated from Ubuntu Quantal a few days ago: rachel@rarity:/etc$ lsb_release -rd Description: Ubuntu Raring Ringtail (development branch) Release: 13.04 rachel@rarity:/etc$ apt-cache policy python python: Installed: 2.7.3-10ubuntu5 Candidate: 2.7.3-10ubuntu5 Version table: *** 2.7.3-10ubuntu5 0 500 http://gb.archive.ubuntu.com/ubuntu/ raring/main amd64 Packages 100 /var/lib/dpkg/status rachel@rarity:/etc$ apt-cache policy python-imaging python-imaging: Installed: 1.1.7+1.7.8-1ubuntu1 Candidate: 1.1.7+1.7.8-1ubuntu1 Version table: *** 1.1.7+1.7.8-1ubuntu1 0 500 http://gb.archive.ubuntu.com/ubuntu/ raring/main amd64 Packages 100 /var/lib/dpkg/status Affects me as it affects building/packaging XBMC post-frodo for raring. :-) To manage notifications about this bug go to: https://bugs.launchpad.net/phatch/+bug/1112496/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1180576] Re: Please update amarok to 2.7.1
** Changed in: kubuntu-ppa Status: In Progress => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to amarok in Ubuntu. https://bugs.launchpad.net/bugs/1180576 Title: Please update amarok to 2.7.1 Status in Unofficial Package Updates for Kubuntu: Fix Released Status in “amarok” package in Ubuntu: Fix Released Bug description: amarok needs to be updated to 2.7.1 Reported by kubotu for IRC user Riddell To manage notifications about this bug go to: https://bugs.launchpad.net/kubuntu-ppa/+bug/1180576/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 31063] Re: Asus A6U, two hotkeys not working
outdated http://www.freedesktop.org/wiki/Software/hal/ ** Changed in: hal (Ubuntu) Status: Confirmed => Invalid ** Changed in: gnome-settings-daemon (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/31063 Title: Asus A6U, two hotkeys not working Status in “acpi-support” package in Ubuntu: Won't Fix Status in “gnome-settings-daemon” package in Ubuntu: Invalid Status in “hal” package in Ubuntu: Invalid Bug description: There are two hotkeys that don't work on this laptop: The Music Player key The Disable touchpad key When I run 'sudo showkey -s' and press these keys, there is no output. Edit: I get the same output from showkey on breezy, but if it helps, the music player key shows up as '0x98' in the keyboard shortcuts dialog. Pressing the disable touchpad key while using the keyboard shortcuts dialog has no effect. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/acpi-support/+bug/31063/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 963736] Re: thunderbird and firefox freeze at random : must be killed and restarted
Leonid: can you link the 32-bit .deb? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/963736 Title: thunderbird and firefox freeze at random : must be killed and restarted Status in “firefox” package in Ubuntu: Confirmed Status in “thunderbird” package in Ubuntu: Confirmed Bug description: Thunderbird freezes at random. I must kill it then reload it. Sometimes the freeze happens when sending a mail. I had no problem in 11.10. It happens several times a day. The only pattern that I can currently see is that the freeze happens frequently when thunderbird is using the network. $ lsb_release -rd Description: Ubuntu precise (development branch) Release: 12.04 $ dpkg-query -s thunderbird Package: thunderbird Status: install ok installed Priority: optional Section: mail Installed-Size: 45256 Maintainer: Ubuntu Mozilla Team Architecture: amd64 Version: 11.0+build1-0ubuntu1 [...] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/963736/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 138691] Re: system hangs at shutdown
http://www.freedesktop.org/wiki/Software/hal/ ** Changed in: hal (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/138691 Title: system hangs at shutdown Status in “dbus” package in Ubuntu: Invalid Status in “hal” package in Ubuntu: Invalid Status in “network-manager” package in Ubuntu: Invalid Bug description: System hangs at shutdown. Looks like some probblem with network: NetworkManager: nm_hal_deinit(): libhal shutdown failed - connection is closed NetworkManager: nm_hal_deinit(): nm_dbus_signal_device_status_change: assertion 'cb_data->data-> bus_connection' failed NetworkManager: nm_hal_deinit(): nm_dbus_signal_device_status_change: assertion 'cb_data->data-> bus_connection' failed NetworkManager: nm_dbus_init(): nm_dbus_init could not get the system bus. Make sure the message bus daemon is running! ProblemType: Bug Architecture: i386 Date: Mon Sep 10 18:00:26 2007 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/yelp Package: yelp 2.19.90-0ubuntu3 PackageArchitecture: i386 ProcCmdline: yelp ProcCwd: /home/tomba ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=sk_SK.UTF-8 SHELL=/bin/bash SourcePackage: yelp Uname: Linux dellbuntu 2.6.22-11-generic #1 SMP Fri Sep 7 05:07:05 GMT 2007 i686 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dbus/+bug/138691/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184149] [NEW] printer queue is wiped out when printer is pluged in
Public bug reported: If print jobs are queeued when the rpinter is not plugged to the system the print jobs are in the queue list, but pending for printing. If the printer is pluged to the system afterwards, sometiimes the print jobs are wiped out from the queue. It may be arround 50% of all cases this way. Steps to reproduce: 1.Start your system without attached printer(all drivers are installed and the system knows the printer in general) 2.Start firefox and send some printjobs to the job queque 3.Attach your printer to the still running system. 5.Call the pint job list/queque from system settings -> printer -> your printer model -> waiting queue 6.See that all print jobs you have just send before are wiped out of the list. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: system-config-printer-gnome 1.3.12+20130308-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-22.33-generic 3.8.11 Uname: Linux 3.8.0-22-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 16:28:07 2013 ExecutablePath: /usr/share/system-config-printer/system-config-printer.py InstallationDate: Installed on 2013-01-13 (132 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python2.7 Lpstat: device for Officejet-Pro-8000-A809: hp:/usb/Officejet_Pro_8000_A809?serial=CN0462M1ZG MachineType: Hewlett-Packard HP 655 Notebook PC MarkForUpload: True PackageArchitecture: all Papersize: a4 PpdFiles: Officejet-Pro-8000-A809: HP Officejet Pro 8000 a809, hpcups 3.13.3 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=26debf37-b34b-4045-b8d6-9e5fb9ed9852 ro splash quiet vt.handoff=7 SourcePackage: system-config-printer UpgradeStatus: Upgraded to raring on 2013-04-18 (36 days ago) dmi.bios.date: 04/27/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1885 dmi.board.vendor: Hewlett-Packard dmi.board.version: 66.11 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.02:bd04/27/2012:svnHewlett-Packard:pnHP655NotebookPC:pvr07981000521000260:rvnHewlett-Packard:rn1885:rvr66.11:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP 655 Notebook PC dmi.product.version: 07981000521000260 dmi.sys.vendor: Hewlett-Packard ** Affects: system-config-printer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to system-config-printer in Ubuntu. https://bugs.launchpad.net/bugs/1184149 Title: printer queue is wiped out when printer is pluged in Status in “system-config-printer” package in Ubuntu: New Bug description: If print jobs are queeued when the rpinter is not plugged to the system the print jobs are in the queue list, but pending for printing. If the printer is pluged to the system afterwards, sometiimes the print jobs are wiped out from the queue. It may be arround 50% of all cases this way. Steps to reproduce: 1.Start your system without attached printer(all drivers are installed and the system knows the printer in general) 2.Start firefox and send some printjobs to the job queque 3.Attach your printer to the still running system. 5.Call the pint job list/queque from system settings -> printer -> your printer model -> waiting queue 6.See that all print jobs you have just send before are wiped out of the list. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: system-config-printer-gnome 1.3.12+20130308-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-22.33-generic 3.8.11 Uname: Linux 3.8.0-22-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 16:28:07 2013 ExecutablePath: /usr/share/system-config-printer/system-config-printer.py InstallationDate: Installed on 2013-01-13 (132 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python2.7 Lpstat: device for Officejet-Pro-8000-A809: hp:/usb/Officejet_Pro_8000_A809?serial=CN0462M1ZG MachineType: Hewlett-Packard HP 655 Notebook PC MarkForUpload: True PackageArchitecture: all Papersize: a4 PpdFiles: Officejet-Pro-8000-A809: HP Officejet Pro 8000 a809, hpcups 3.13.3 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=26debf37-b34b-4045-b8d6-9e5fb9ed9852 ro splash quiet vt.handoff=7 SourcePackage: system-config-printer UpgradeStatus: Upgraded to raring on 2013-04-18 (36 days ago) dmi.bios.date: 04/27/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.02 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1885 dmi.board.vendor: Hewlett-Packard dmi.board.version: 66.11 dmi.chassis.asset.tag: C
[Desktop-packages] [Bug 576648] Re: package nvidia-* failed to install/upgrade: nvidia-* kernel module failed to build (Unable to determine the target kernel version.)
@albertomilone yes, I did (2). The headers are installed: brunojcm@brunojcm-desktop:~$ dpkg -l linux-headers-3.8* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ NameVersion Description +++-===-===-== ii linux-headers-3.8.0-20 3.8.0-20.31~precise1Header files related to Linux kernel version 3.8.0 ii linux-headers-3.8.0-20-generic 3.8.0-20.31~precise1Linux kernel headers for version 3.8.0 on 64 bit x86 SMP ii linux-headers-3.8.0-21 3.8.0-21.32~precise1Header files related to Linux kernel version 3.8.0 ii linux-headers-3.8.0-21-generic 3.8.0-21.32~precise1Linux kernel headers for version 3.8.0 on 64 bit x86 SMP -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu. https://bugs.launchpad.net/bugs/576648 Title: package nvidia-* failed to install/upgrade: nvidia-* kernel module failed to build (Unable to determine the target kernel version.) Status in NVIDIA Drivers Ubuntu: Confirmed Status in “nvidia-graphics-drivers” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers-173” package in Ubuntu: Fix Released Status in “nvidia-graphics-drivers-304” package in Ubuntu: Fix Released Status in “nvidia-graphics-drivers-313-updates” package in Ubuntu: Fix Released Status in “nvidia-graphics-drivers-96” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers-experimental-304” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers-experimental-310” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers-updates” package in Ubuntu: Triaged Bug description: WORKAROUND: Revert back to the kernel version that your Ubuntu release came with: Ubuntu 10.04 --> kernel 2.6.32 Ubuntu 11.04 --> kernel 2.6.38 TEST CASE FOR 10.04: Starting with a fresh Ubuntu 10.04.3 installation... sudo add-apt-repository ppa:kernel-ppa/ppa sudo apt-get update sudo apt-get install linux-image-3.0.0-8-generic sudo apt-get install linux-headers-3.0.0-8-generic # or should that be: install linux-lts-backport-oneiric ? # REBOOT sudo apt-get install nvidia-173 # The above command fails with an error. # Check the exact error: cat /var/lib/dkms/nvidia-173/*/build/make.log ORIGINAL DESCRIPTION: Brand new install of 10.04 onto a formatted hard drive. The upgrade icon said there was a restricted driver available - I clicked it. When I was running a Windows XP VMWare image, the video seemed to completely reset. I had to shut down and restart. ProblemType: Package DistroRelease: Ubuntu 10.04 Package: nvidia-current 195.36.15-0ubuntu3 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Thu May 6 16:43:59 2010 DkmsStatus: nvidia-current, 195.36.15, 2.6.32-21-generic, x86_64: installed nvidia-current, 195.36.15, 2.6.32-22-generic, x86_64: installed ErrorMessage: nvidia-current kernel module failed to build InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429) MachineType: LENOVO 64576DU PackageVersion: 195.36.15-0ubuntu3 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: 3.3V 32-bit PC Card ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=e48c7906-adfe-4aef-b42f-afbb2328f9c3 ro quiet splash SourcePackage: nvidia-graphics-drivers Title: package nvidia-current 195.36.15-0ubuntu3 failed to install/upgrade: nvidia-current kernel module failed to build dmi.bios.date: 08/22/2007 dmi.bios.vendor: LENOVO dmi.bios.version: 7LET51WW (1.21 ) dmi.board.name: 64576DU dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr7LET51WW(1.21):bd08/22/2007:svnLENOVO:pn64576DU:pvrThinkPadT61:rvnLENOVO:rn64576DU:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 64576DU dmi.product.version: ThinkPad T61 dmi.sys.vendor: LENOVO glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: x86_64 kernel: 2.6.32-22-generic To manage notifications about this bug go to: https://bugs.launchpad.net/nvidia-drivers-ubuntu/+bug/576648/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://l
[Desktop-packages] [Bug 1182051] Re: Turning off eDP-1 causes stutter
This seems to be freedesktop.org bug #64858: https://bugs.freedesktop.org/show_bug.cgi?id=64858 ** Bug watch added: freedesktop.org Bugzilla #64858 https://bugs.freedesktop.org/show_bug.cgi?id=64858 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/1182051 Title: Turning off eDP-1 causes stutter Status in “xserver-xorg-video-nouveau” package in Ubuntu: New Bug description: After upgrading to Raring, my X stutters a lot whenever the eDP-1 output is disabled (for example with xrandr). In this state, the kernel log is also filled with numerous messages regarding invalid EDID checksums. The behavior was not seen with Quantal. The problem also partially goes away with mainline kernel 3.9. I would describe the stutters as about 10 ms freezes occurring roughly every second. Meanwhile, dmesg sees a lot of "[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 48" and a few "nouveau E[ I2C][:01:00.0] AUXCH(1): tx req timeout 0x01114000". Behavior is restored to normal when eDP-1 is re-enabled. The problem was not seen in Quantal. Installing the 3.9 mainline kernel partially mitigates the problem, but brings other ones, such as a kworker thread pegged at 100% CPU. This could be unrelated. The drm_kms_helper.poll=0 boot parameter does not help with the standard Raring kernel, but is in fact neccessary with 3.9. The problem seems to be unrelated to whether or not there are multiple monitors attached, for example on DP-1 and VGA-1. A single monitor on either DP-1 or VGA-1 is enough to observe the stutter as soon as eDP-1 is disabled. (Simply leaving eDP-1 enabled is not an option for me, as it has to be disabled to use DP-1 and VGA-1 simultaneously on my laptop.) Ubuntu version: 13.04 xserver-xorg-video-nouveau version: 1:1.0.7-0ubuntu1 Kernel version: 3.8.0-21.32 Graphics hardware: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [NVS 3100M] (rev a2) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/+bug/1182051/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1142213] Re: emacs23/24 and other GTK applications do not start when run in Kubuntu 13.04 with oxygen-gtk theme enabled
** Changed in: gtk2-engines-oxygen (Debian) Status: Unknown => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk2-engines-oxygen in Ubuntu. https://bugs.launchpad.net/bugs/1142213 Title: emacs23/24 and other GTK applications do not start when run in Kubuntu 13.04 with oxygen-gtk theme enabled Status in GNU Emacs: Fix Released Status in “emacs23” package in Ubuntu: Confirmed Status in “emacs24” package in Ubuntu: Confirmed Status in “gtk2-engines-oxygen” package in Ubuntu: Confirmed Status in “oxygen-gtk3” package in Ubuntu: Confirmed Status in “gtk2-engines-oxygen” package in Debian: Fix Released Bug description: If I try to run emacs23 in Kubuntu 13.04, (KDE 4.10.0) I am finding that the GUI starts only some of the time. If the GUI doesn't start then I will only see a process running in htop or similar. Starting emacs in a terminal window with the -nw argument or installing the Lucid interface shows that emacs does run each time it starts so the problem is either with the emacs GTK interface or the GTK libraries. Emacs24 exhibits the same problem. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: emacs23 (not installed) ProcVersionSignature: Ubuntu 3.8.0-9.18-generic 3.8.1 Uname: Linux 3.8.0-9-generic x86_64 ApportVersion: 2.9-0ubuntu2 Architecture: amd64 Date: Sun Mar 3 14:19:01 2013 InstallationDate: Installed on 2013-01-05 (57 days ago) InstallationMedia: Kubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130104) MarkForUpload: True ProcEnviron: LANGUAGE=en_GB:en TERM=screen-256color PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: emacs23 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/emacs/+bug/1142213/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 854490] Re: update from natty to oneiric hangs on libpam0g upgrade and cups reload
https://wiki.ubuntu.com/Releases ** Changed in: apt (Ubuntu) Status: Confirmed => Invalid ** Changed in: apt (Ubuntu Precise) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/854490 Title: update from natty to oneiric hangs on libpam0g upgrade and cups reload Status in “apt” package in Ubuntu: Invalid Status in “cups” package in Ubuntu: Fix Released Status in “apt” source package in Oneiric: Won't Fix Status in “cups” source package in Oneiric: Fix Released Status in “apt” source package in Precise: Invalid Status in “cups” source package in Precise: Invalid Bug description: TEST CASE: 1. Install Natty and apply updates 2. run update-manager -d and proceed with the upgrade to 11.10 Result: The upgrade hangs at libpam0g upgrade when cups is reloaded. The last message displayed on console and terminal log is: Restarting services possibly affected by the upgrade: gdm: reloading...done. cups: stopping...starting... The following message is displayed and repeated in syslog Sep 20 09:19:36 ubuntu-VirtualBox kernel: [ 1893.528204] type=1400 audit(1316503176.331:210): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=18386 comm="apparmor_parser" Sep 20 09:19:36 ubuntu-VirtualBox kernel: [ 1893.528494] type=1400 audit(1316503176.331:211): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=18386 comm="apparmor_parser" Sep 20 09:19:36 ubuntu-VirtualBox init: cups main process (18387) terminated with status 127 Sep 20 09:19:36 ubuntu-VirtualBox init: cups main process ended, respawning The following cups processes are running: root 16275 0.0 0.0 2028 512 pts/2S+ 09:11 0:00 /bin/sh -e /etc/init.d/cups start root 16279 0.0 0.1 4944 1292 pts/2S+ 09:11 0:00 start cups Killing process 16275 allows to continue the upgrade. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: update-manager 1:0.150.3 ProcVersionSignature: Ubuntu 2.6.38-11.48-generic 2.6.38.8 Uname: Linux 2.6.38-11-generic i686 Architecture: i386 Date: Tue Sep 20 09:13:29 2011 GConfNonDefault: /apps/update-manager/check_new_release_ignore= /apps/update-manager/first_run=false /apps/update-manager/window_size=(600,600) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: update-manager UpgradeStatus: Upgraded to natty on 2011-09-20 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt/+bug/854490/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1175266] Re: Sometimes picture on the screen becomes incomprehensible (like collected from random bloks of original pikture). Errors in /var/log/kern.log like "nouveau E[ PGRAP
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xserver-xorg-video-nouveau (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/1175266 Title: Sometimes picture on the screen becomes incomprehensible (like collected from random bloks of original pikture). Errors in /var/log/kern.log like "nouveau E[ PGRAPH][:01:00.0] ILLEGAL_MTHD" Status in “xserver-xorg-video-nouveau” package in Ubuntu: Confirmed Bug description: Sometimes picture on the screen becomes incomprehensible (like collected from random bloks of original pikture). Ubuntu 13.04 /var/log/kern.log: May 1 16:30:57 krot-PC kernel: [ 9243.839873] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020033c4c Put 0x0020036608 IbGet 0x03cf IbPut 0x03d0 State 0x80004861 (err: INVALID_CMD) Push 0x00704031 May 1 16:30:57 krot-PC kernel: [ 9243.847511] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020036678 Put 0x0020036608 IbGet 0x03cf IbPut 0x03d0 State 0x4004 (err: INVALID_MTHD) Push 0x00406040 May 1 16:30:57 krot-PC kernel: [ 9243.849873] nouveau E[ PFIFO][:01:00.0] CACHE_ERROR - Ch 2/0 Mthd 0x Data 0x1900 May 1 18:05:15 krot-PC kernel: [14897.198110] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020029840 Put 0x002002a3e4 IbGet 0x011f IbPut 0x0122 State 0x80001b80 (err: INVALID_CMD) Push 0x00406040 May 1 18:15:05 krot-PC kernel: [15487.647290] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020026058 Put 0x0020027b84 IbGet 0x032b IbPut 0x032c State 0x8020 (err: INVALID_CMD) Push 0x00406040 May 1 19:55:58 krot-PC kernel: [21535.776420] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x00200243b0 Put 0x0020025138 IbGet 0x0182 IbPut 0x0185 State 0x80004861 (err: INVALID_CMD) Push 0x00406040 May 1 19:55:58 krot-PC kernel: [21535.776438] nouveau E[ PGRAPH][:01:00.0] TRAP_TPDMA_2D - TP 0 - Unknown fault at address 002078b500 May 1 19:55:58 krot-PC kernel: [21535.776441] nouveau E[ PGRAPH][:01:00.0] TRAP_TPDMA_2D - TP 0 - e0c: , e18: , e1c: 00140004, e20: 0011, e24: 0c03 May 1 19:55:58 krot-PC kernel: [21535.776447] nouveau E[ PGRAPH][:01:00.0] TRAP May 1 19:55:58 krot-PC kernel: [21535.776452] nouveau E[ PGRAPH][:01:00.0] ch 2 [0x001fad9000] subc 2 class 0x502d mthd 0x0860 data 0x0040 May 1 19:55:58 krot-PC kernel: [21535.776461] nouveau E[ PFB][:01:00.0] trapped write at 0x002078b500 on channel 0x0001fad9 PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT May 1 20:00:22 krot-PC kernel: [21799.703311] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x002002d2b4 Put 0x002002e47c IbGet 0x02bc IbPut 0x02bd State 0x8020 (err: INVALID_CMD) Push 0x00406040 May 1 20:02:17 krot-PC kernel: [21913.917651] nouveau E[ PFIFO][:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020034efc Put 0x00200360bc IbGet 0x0260 IbPut 0x0261 State 0x4004 (err: INVALID_MTHD) Push 0x00406040 May 1 20:02:17 krot-PC kernel: [21913.944785] nouveau E[ PGRAPH][:01:00.0] ILLEGAL_MTHD May 1 20:02:17 krot-PC kernel: [21913.944799] nouveau E[ PGRAPH][:01:00.0] ch 2 [0x001fad9000] subc 0 class 0x0030 mthd 0x0200 data 0x0001 ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed May 1 21:53:37 2013 DistUpgraded: 2013-04-30 21:49:20,364 DEBUG enabling apt cron job DistroCodename: raring DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2) (prog-if 00 [VGA controller]) InstallationDate: Installed on 2012-10-21 (192 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MachineType: Gigabyte Technology Co., Ltd. GA-970A-D3 MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=d3f644cf-a581-4546-97ec-666292691b65 ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-video-nouveau UpgradeStatus: Upgraded to raring on 2013-04-30 (1 days ago) dmi.bios.date: 12/27/2011 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F8e dmi.board.name: GA-970A-D3 dm
[Desktop-packages] [Bug 1184154] [NEW] After last Kernel Update (3.2.0-44) system hangs on startup
Public bug reported: My system hangs when I startup. The login screen shows up, but when I try to enter the password, after 1-3 chars the system hangs (keyboard and mouse freeze, system does not respond to anything except reset). I now started the system with the older 3.2.0-41 kernel and it works. I also attach a dmesg-file from a previous startup. The only thing I noticed myself are the odd NFSD-messages at the end, which I did not find in the newer dmesg (with patch 41 kernel). Ubuntu 12.04.2 LTS ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic 3.2.42 Uname: Linux 3.2.0-41-generic i686 NonfreeKernelModules: tusbd nvidia ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 Date: Sat May 25 17:03:19 2013 InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=de_DE.ISO-8859-1 SHELL=/bin/bash SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to precise on 2012-08-24 (274 days ago) ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug fonts i386 kubuntu precise ** Attachment added: "startup protocol (dmesg) from frozen startup with 3.2.0-44" https://bugs.launchpad.net/bugs/1184154/+attachment/3686550/+files/dmesg.0 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1184154 Title: After last Kernel Update (3.2.0-44) system hangs on startup Status in “xorg” package in Ubuntu: New Bug description: My system hangs when I startup. The login screen shows up, but when I try to enter the password, after 1-3 chars the system hangs (keyboard and mouse freeze, system does not respond to anything except reset). I now started the system with the older 3.2.0-41 kernel and it works. I also attach a dmesg-file from a previous startup. The only thing I noticed myself are the odd NFSD-messages at the end, which I did not find in the newer dmesg (with patch 41 kernel). Ubuntu 12.04.2 LTS ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic 3.2.42 Uname: Linux 3.2.0-41-generic i686 NonfreeKernelModules: tusbd nvidia ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 Date: Sat May 25 17:03:19 2013 InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=de_DE.ISO-8859-1 SHELL=/bin/bash SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to precise on 2012-08-24 (274 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1184154/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1144703] Re: Seahorse does not show name or description of gvfs keys
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: seahorse (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to seahorse in Ubuntu. https://bugs.launchpad.net/bugs/1144703 Title: Seahorse does not show name or description of gvfs keys Status in “seahorse” package in Ubuntu: Confirmed Bug description: 1) Mount a (bunch of) LUKS encrypted 'devices' in Nautilus or Nemo. 2) In the password dialogs, choose to "Remember the password forever" 3) Open Seahorse (listed as "Passwords and Keys" in the Shell or Cinnamon) 4) All added keys are nameless and indistinguishable. :( x1 5) Show the properties of such a key, and notice how the "description" is also empty. :( x2 6) With python-gnomekeyring, the discription is not empty, rather something like: "Encryption passphrase for Seagate SG35623563VER112 (2.0 TB Hard Disk)" 7) Add a description in the Seahorse properties, close, and re-open properties. 8) Notice how the description is still empty. :( x3 9) With python-gnomekeyring, you can see the actual description has changed to whatever you changed it to. Seahorse 3.6.2 here. Python example: -- #!/usr/bin/env python import gnomekeyring as gk keyring = 'login' keyItems = gk.list_item_ids_sync(keyring) for keyItem in keyItems: key = gk.item_get_info_sync(keyring, keyItem) # Just for testing if key.get_secret() == 'your_password': print "Key ID:", key print "\tDescription:", key.get_display_name() print "\tPassword :", key.get_secret() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/seahorse/+bug/1144703/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184160] [NEW] multitouch - not all 3 finger actions working
Public bug reported: As reported on https://wiki.ubuntu.com/Multitouch, the following 3 gestures are not working (and they are the ones I find most useful): 3 finger pinch to maximize/restore windows 3 finger press and drag to move window 3 finger touch to show grab handles The other 3 finger gestures appear to be working (although I don't really want to use them). I have followed instructions as on https://wiki.ubuntu.com/DebuggingTouchpadDetection and am attaching the appropriate files. Laptop model: Asus N56VJ Running kernel: 3.9.0-rc6-custom+ (from Aaron Lu git branch) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xserver-xorg-input-synaptics 1.6.2-1ubuntu6 Uname: Linux 3.9.0-rc6-custom+ x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 16:40:43 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu InstallationDate: Installed on 2013-05-15 (10 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: ASUSTeK COMPUTER INC. N56VJ MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc6-custom+ root=UUID=e16af3ef-7f12-4a5d-9a73-a494b86af80e ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/29/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N56VJ.203 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N56VJ dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN56VJ.203:bd08/29/2012:svnASUSTeKCOMPUTERINC.:pnN56VJ:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VJ:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N56VJ dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.43-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.1-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.1-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 xserver.bootTime: Sat May 25 15:50:12 2013 xserver.configfile: default xserver.errors: Failed to load module "nvidia" (module does not exist, 0) Failed to load module "nvidia" (module does not exist, 0) NOUVEAU(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.3-0ubuntu6 xserver.video_driver: intel ** Affects: xserver-xorg-input-synaptics (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring ubuntu ** Attachment added: "tgz of xev, evtest, xmodmap, xinput output" https://bugs.launchpad.net/bugs/1184160/+attachment/3686555/+files/multi_bug.tgz -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1184160 Title: multitouch - not all 3 finger actions working Status in “xserver-xorg-input-synaptics” package in Ubuntu: New Bug description: As reported on https://wiki.ubuntu.com/Multitouch, the following 3 gestures are not working (and they are the ones I find most useful): 3 finger pinch to maximize/restore windows 3 finger press and drag to move window 3 finger touch to show grab handles The other 3 finger gestures appear to be working (although I don't really want to use them). I have followed instructions as on https://wiki.ubuntu.com/DebuggingTouchpadDetection and am attaching the appropriate files. Laptop model: Asus N56VJ Running kernel: 3.9.0-rc6-custom+ (from Aaron Lu git branch) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xserver-xorg-input-synaptics 1.6.2-1ubuntu6 Uname: Linux 3.9.0-rc6-custom+ x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 16:40:43 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu InstallationDate: Installed on 2013-05-15 (10 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: ASUSTeK COMPUTER INC. N56VJ MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc6-custom+ root=UUID=e16af3ef-7f12-4a5d-9a73-a494b86af80e ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/29/2012 dmi.bios.ven
[Desktop-packages] [Bug 1184161] [NEW] [To be filled by O.E.M., ATI R6xx HDMI, Digital Out, HDMI] No sound at all
Public bug reported: My HDMI sound its not working. I have my CPU connected to my HD TV and I don't have sound at all. I have check the configuration of PC and its fine. I'm sure its some transmition problem between my CPU and my TV. my sound its normal at widows 7 my other OS. I have a radeon HD6670 graphics card install in my intel core i3 whit 4GB of RAM. I have the Ubuntu 13.04 and I'm not an expert at linux OS. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ingpit 1867 F pulseaudio /dev/snd/controlC0: ingpit 1867 F pulseaudio Date: Sat May 25 10:39:56 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-23 (1 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Generic failed Symptom_Card: Turks/Whistler HDMI Audio [Radeon HD 6000 Series] - HD-Audio Generic Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ingpit 1867 F pulseaudio /dev/snd/controlC0: ingpit 1867 F pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_Type: No sound at all Title: [To be filled by O.E.M., ATI R6xx HDMI, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H61MXE dmi.board.vendor: Foxconn dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd02/15/2012:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnFoxconn:rnH61MXE:rvrTobefilledbyO.E.M.:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1184161 Title: [To be filled by O.E.M., ATI R6xx HDMI, Digital Out, HDMI] No sound at all Status in “alsa-driver” package in Ubuntu: New Bug description: My HDMI sound its not working. I have my CPU connected to my HD TV and I don't have sound at all. I have check the configuration of PC and its fine. I'm sure its some transmition problem between my CPU and my TV. my sound its normal at widows 7 my other OS. I have a radeon HD6670 graphics card install in my intel core i3 whit 4GB of RAM. I have the Ubuntu 13.04 and I'm not an expert at linux OS. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ingpit 1867 F pulseaudio /dev/snd/controlC0: ingpit 1867 F pulseaudio Date: Sat May 25 10:39:56 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2013-05-23 (1 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Generic failed Symptom_Card: Turks/Whistler HDMI Audio [Radeon HD 6000 Series] - HD-Audio Generic Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ingpit 1867 F pulseaudio /dev/snd/controlC0: ingpit 1867 F pulseaudio Symptom_Jack: Digital Out, HDMI Symptom_Type: No sound at all Title: [To be filled by O.E.M., ATI R6xx HDMI, Digital Out, HDMI] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/15/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H61MXE dmi.board.vendor: Foxconn dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd02/15/2012:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnFoxconn:rnH61MXE:rv
[Desktop-packages] [Bug 1184164] [NEW] backlight does not dim on AC adapter unplug
Public bug reported: I expect my laptop backlight to dim to when I unplug the AC adapter. This never happens. Laptop: Asus N56VJ Kernel: 3.9.0-rc6-custom+ (running Aaron Lu git branch, which fixes fn-F5 and fn-F6 screen brightness hotkeys) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-power-manager 3.6.0-1ubuntu1 Uname: Linux 3.9.0-rc6-custom+ x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 17:02:17 2013 InstallationDate: Installed on 2013-05-15 (10 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True SourcePackage: gnome-power-manager UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-power-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug raring ** Attachment added: "upower --monitor-detail" https://bugs.launchpad.net/bugs/1184164/+attachment/3686592/+files/upower.log.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-power-manager in Ubuntu. https://bugs.launchpad.net/bugs/1184164 Title: backlight does not dim on AC adapter unplug Status in “gnome-power-manager” package in Ubuntu: New Bug description: I expect my laptop backlight to dim to when I unplug the AC adapter. This never happens. Laptop: Asus N56VJ Kernel: 3.9.0-rc6-custom+ (running Aaron Lu git branch, which fixes fn-F5 and fn-F6 screen brightness hotkeys) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-power-manager 3.6.0-1ubuntu1 Uname: Linux 3.9.0-rc6-custom+ x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 17:02:17 2013 InstallationDate: Installed on 2013-05-15 (10 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True SourcePackage: gnome-power-manager UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-power-manager/+bug/1184164/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184163] AlsaInfo.txt
apport information ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1184163/+attachment/3686595/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1184163 Title: Belkin Music Receiver, playback: No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1184163/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184163] [NEW] Belkin Music Receiver, playback: No sound at all
Public bug reported: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug apport-collected i386 raring ** Tags added: apport-collected ** Description changed: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The
[Desktop-packages] [Bug 1184163] BootDmesg.txt
apport information ** Attachment added: "BootDmesg.txt" https://bugs.launchpad.net/bugs/1184163/+attachment/3686596/+files/BootDmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1184163 Title: Belkin Music Receiver, playback: No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1184163/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184163] Dependencies.txt
apport information ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1184163/+attachment/3686598/+files/Dependencies.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1184163 Title: Belkin Music Receiver, playback: No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1184163/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184163] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1184163/+attachment/3686597/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1184163 Title: Belkin Music Receiver, playback: No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1184163/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184163] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1184163/+attachment/3686600/+files/PulseList.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1184163 Title: Belkin Music Receiver, playback: No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1184163/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184163] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1184163/+attachment/3686599/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1184163 Title: Belkin Music Receiver, playback: No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: Release of Ubuntu which I am using: Description: Ubuntu 13.04 Release: 13.04 Package version used: pulseaudio: 1:3.0-0ubuntu6 pulseaudio-module-bluetooth: 1:3.0-0ubuntu6 linux: 3.8.0.22.38 (i386) alsa-base: 1.0.25+dfsg-0ubuntu4 bluez: 4.101-0ubuntu8b1 bluez-alsa: 4.101-0ubuntu8b1 blueman: 1.23-0ubuntu4 Hardware used: Dell Inspiron 6400n (also sold as E1505 in the US) Belkin Bluetooth® Music Receiver (see http://www.belkin.com/us/F8Z492/p/P-F8Z492 ) What I expected to happen: Upon setting up the Music Receiver as a new sound device using blueman, it gets automagically set up as a pulseaudio sink. Sound effects, music etc gets streamed to the Music Receiver. This is how it used to work in Ubuntu 12.10 Quantal. What happened instead: Upon setting up the Music Receiver as a new sound device using blueman, Unity notifies me the device is setup correctly and available as a sound device in PulseAudio. However, Sound effects, music etc does *not* get streamed to the Music Receiver, but instead is played back via the built-in soundcard. The following messages occur in /var/log/syslog: May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists May 25 17:31:21 pulseaudio[2844]: last message repeated 3 times May 25 17:31:21 inspiron6400n pulseaudio[2844]: [pulseaudio] module-bluetooth-device.c: Profile has no transport This behaviour is reproducible. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pulseaudio 1:3.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Date: Sat May 25 18:05:07 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True SourcePackage: pulseaudio Symptom: audio Symptom_Card: Belkin B13 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio Symptom_Type: No sound at all Title: [Belkin B13, playback] No sound at all UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: daniel 2844 F pulseaudio DistroRelease: Ubuntu 13.04 EcryptfsInUse: Yes InstallationDate: Installed on 2011-09-11 (622 days ago) InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MarkForUpload: True Package: alsa-base 1.0.25+dfsg-0ubuntu4 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Tags: raring Uname: Linux 3.8.0-21-generic i686 UpgradeStatus: Upgraded to raring on 2013-05-01 (23 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 06/13/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.name: 0KD882 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd06/13/2007:svnDellInc.:pnMM061:pvr:rvnDellInc.:rn0KD882:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: MM061 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1184163/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1180881] Re: Touchscreen only works after suspend/resume on Lenovo ideapad P400 Touch
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xserver-xorg-input-evdev (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-evdev in Ubuntu. https://bugs.launchpad.net/bugs/1180881 Title: Touchscreen only works after suspend/resume on Lenovo ideapad P400 Touch Status in “xserver-xorg-input-evdev” package in Ubuntu: Confirmed Bug description: Touchscreen is unresponsive on fresh 13.04 Ubuntu installation. All other devices work. Touchscreen shows as working and 'states' are correct for any xinput --list off of a cold boot. However, if I (at any point) "Suspend" the system, then awaken it, the Touchscreen immediately functions properly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/1180881/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184160] Re: multitouch - not all 3 finger actions working
I have no idea if this is related, but I also do not see settings such as "Horizontal Scroll" in the Mouse&Touchpad settings window, and the option "Disable Touchpad While Typing", though displayed and selected, does not work at all. This makes typing and development very difficult - as my palm brushes the touchpad, and the mouse cursor jumps unpredictably, causing me big problems when editing text. Please let me know if I need to log a separate bug report for this. Screenshot attached. ** Attachment added: "no horizontal scroll option, disable touchpad option doesn't work" https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1184160/+attachment/3686601/+files/touchpadSettingsMissing.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1184160 Title: multitouch - not all 3 finger actions working Status in “xserver-xorg-input-synaptics” package in Ubuntu: New Bug description: As reported on https://wiki.ubuntu.com/Multitouch, the following 3 gestures are not working (and they are the ones I find most useful): 3 finger pinch to maximize/restore windows 3 finger press and drag to move window 3 finger touch to show grab handles The other 3 finger gestures appear to be working (although I don't really want to use them). I have followed instructions as on https://wiki.ubuntu.com/DebuggingTouchpadDetection and am attaching the appropriate files. Laptop model: Asus N56VJ Running kernel: 3.9.0-rc6-custom+ (from Aaron Lu git branch) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xserver-xorg-input-synaptics 1.6.2-1ubuntu6 Uname: Linux 3.9.0-rc6-custom+ x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat May 25 16:40:43 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu InstallationDate: Installed on 2013-05-15 (10 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: ASUSTeK COMPUTER INC. N56VJ MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc6-custom+ root=UUID=e16af3ef-7f12-4a5d-9a73-a494b86af80e ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/29/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N56VJ.203 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N56VJ dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN56VJ.203:bd08/29/2012:svnASUSTeKCOMPUTERINC.:pnN56VJ:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VJ:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N56VJ dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.43-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.1-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.1-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 xserver.bootTime: Sat May 25 15:50:12 2013 xserver.configfile: default xserver.errors: Failed to load module "nvidia" (module does not exist, 0) Failed to load module "nvidia" (module does not exist, 0) NOUVEAU(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.3-0ubuntu6 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1184160/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1181828] Re: macbook air 2,1 no sound
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: alsa-driver (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1181828 Title: macbook air 2,1 no sound Status in “alsa-driver” package in Ubuntu: Confirmed Bug description: Hello, I installed Ubuntu raring 13.04 on a Macbook Air 2,1 and I have no sound. The card is recognized by alsamixer and pulseaudio. I put the volume to the maximum, put all the mixer unmute in alsamixer, no sound at all. Thanks for your help. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 NonfreeKernelModules: wl nvidia ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: rom1 1493 F pulseaudio CurrentDmesg: [8.408776] NVRM: GPU at :02:00: GPU-e1116370-0337-a0c6-6dce-80e73ebd884a Date: Sun May 19 20:29:36 2013 InstallationDate: Installed on 2013-05-19 (0 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MarkForUpload: True PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/14/08 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA21.88Z.0075.B03.0811141325 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-F42D88C8 dmi.board.vendor: Apple Inc. dmi.chassis.asset.tag: Asset Tag# dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-F42D88C8 dmi.modalias: dmi:bvnAppleInc.:bvrMBA21.88Z.0075.B03.0811141325:bd11/14/08:svnAppleInc.:pnMacBookAir2,1:pvr1.0:rvnAppleInc.:rnMac-F42D88C8:rvr:cvnAppleInc.:ct10:cvrMac-F42D88C8: dmi.product.name: MacBookAir2,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1181828/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 743941] Re: indicator-weather crashed with SIGABRT in raise()
Works great! But you need python-pywapi to make it work. Thanks! Bob On 05/24/2013 10:51 PM, Joshua Tasker wrote: > This should be fixed in 13.05.17, try the tarball or the package from > the ,Weather Indicator Team PPA and please reopen this bug if it is not. > > ** Changed in: weather-indicator > Milestone: 11.04.02 => 13.05.17 > -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to indicator-weather in Ubuntu. https://bugs.launchpad.net/bugs/743941 Title: indicator-weather crashed with SIGABRT in raise() Status in Indicator-Weather: Fix Released Status in “indicator-weather” package in Ubuntu: Fix Released Bug description: Binary package hint: indicator-weather Application just crashed. ProblemType: Crash DistroRelease: Ubuntu 11.04 Package: indicator-weather 11.03.20+repack-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-7.39-generic 2.6.38 Uname: Linux 2.6.38-7-generic x86_64 NonfreeKernelModules: wl Architecture: amd64 CrashCounter: 1 Date: Sun Mar 27 19:19:42 2011 ExecutablePath: /usr/bin/indicator-weather InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Alpha amd64 (20110120) InterpreterPath: /usr/bin/python2.7 ProcCmdline: /usr/bin/python /usr/bin/indicator-weather ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash Signal: 6 SourcePackage: indicator-weather StacktraceTop: raise () from /lib/x86_64-linux-gnu/libc.so.6 abort () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /lib/x86_64-linux-gnu/libc.so.6 Title: indicator-weather crashed with SIGABRT in raise() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare To manage notifications about this bug go to: https://bugs.launchpad.net/weather-indicator/+bug/743941/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184168] [NEW] Update libgweather to 3.8
Public bug reported: I have updated the ubuntu-desktop branch (linked) with the libgweather 3.8 packaging, merged from Debian. libgweather 3.8 is needed to update gnome-clocks to 3.8. I don't have upload rights for this package so I will need sponsorship. Note that the soname was bumped so this will start a small transition. Details below. Needs a rebuild evolution evolution-data-server Shouldn't need rebuild = meta-gnome3 (gnome-core-devel) gnome-clocks (just uses gir and should work with new version without changes) Needs patch == gnome-applets and gnome-panel need patches backported from git: https://git.gnome.org/browse/gnome-applets/commit/?id=890044b https://git.gnome.org/browse/gnome-panel/commit/?id=f5550422 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libgweather-common 3.6.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.9.0-2.7-generic 3.9.3 Uname: Linux 3.9.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu1 Architecture: amd64 Date: Sat May 25 12:38:06 2013 MarkForUpload: True PackageArchitecture: all SourcePackage: libgweather UpgradeStatus: Upgraded to saucy on 2013-05-07 (17 days ago) ** Affects: libgweather (Ubuntu) Importance: Wishlist Status: New ** Tags: amd64 apport-bug saucy ** Branch linked: lp:~ubuntu-desktop/libgweather/ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libgweather in Ubuntu. https://bugs.launchpad.net/bugs/1184168 Title: Update libgweather to 3.8 Status in “libgweather” package in Ubuntu: New Bug description: I have updated the ubuntu-desktop branch (linked) with the libgweather 3.8 packaging, merged from Debian. libgweather 3.8 is needed to update gnome-clocks to 3.8. I don't have upload rights for this package so I will need sponsorship. Note that the soname was bumped so this will start a small transition. Details below. Needs a rebuild evolution evolution-data-server Shouldn't need rebuild = meta-gnome3 (gnome-core-devel) gnome-clocks (just uses gir and should work with new version without changes) Needs patch == gnome-applets and gnome-panel need patches backported from git: https://git.gnome.org/browse/gnome-applets/commit/?id=890044b https://git.gnome.org/browse/gnome-panel/commit/?id=f5550422 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libgweather-common 3.6.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.9.0-2.7-generic 3.9.3 Uname: Linux 3.9.0-2-generic x86_64 ApportVersion: 2.10.2-0ubuntu1 Architecture: amd64 Date: Sat May 25 12:38:06 2013 MarkForUpload: True PackageArchitecture: all SourcePackage: libgweather UpgradeStatus: Upgraded to saucy on 2013-05-07 (17 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libgweather/+bug/1184168/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1173571] Re: please add wenquanyi micro hei settings back with 69-language-selector-zh-tw.conf
@Laney: I just spent some time checking what is changed with those fontconfig files. I found that Micro Hei related config listed in 69-language-selector-zh- tw.conf before raring is merged into 65-ttf-wqy-microhei.conf. Those binding things listed at the last part of the conf are outdated and should be removed. The binding setting was to mimic the look and feel provided by previous Ubuntu versions which use DejaVu Sans as default font. (Yeah, I wrote those lines) However, we use "ubuntu" font now. That configuration is not needed anymore. Here is the overview of my analysis about the font configuration now. 1. the setting in 65-ttf-wqy-microhei.conf does not strongly affect the Chinese characters provided by those pseudo font family such as serif, sans-serif and monospace. Here is the priority of the conf affecting the Chinese characters provided by sans-serif, *I rm 69-language-selector-zh-tw.conf and found that sans-serif was then WenQuanYi Zen Hei (mainly decided by 64-wqy-zenhei.conf and partially 65-nonlatin.conf). *I rm 64-wqy-zenhei.conf and found that sans-serif was later AR PL UKai (mainly decided by 65-fonts-arphic-ukai.conf). *I rm 65-fonts-arphic-ukai.conf and then it would be AR PL UMing (mainly decided by 65-fonts-arphic-uming.conf). *I rm 65-fonts-arhpic-uming.conf and it later became WenQuanYi Zen Hei (mainly decided by 65-nonlatin.conf). *I rm 65-nanlatin.conf and it became WenQuanYi MicroHei finally. Bottom line is that it is not that easy if we want to make things work in 65-ttf-wqy-microhei.conf. Maybe we have to figure out a better setting or change the priority. 2. 69-language-selector-zh-tw.conf has higher priority in this case about the Chinese characters provided by sans-serif than those conf with smaller prefix number. Improvement proposal 0. it is better to clean up those unnecessary lines in 65-ttf-wqy-microhei.conf 1a. change 69-language-selector-zh-tw.conf directly to use WenQuanYi Micro Hei instead of WenQuanYi Zen Hei. 1b. make 65-ttf-wqy-microhei.conf setting affect stronger. Change the settings or tune the prefix number or somewhat. I believe that the easiest way to fix this issue is 1a. Well, I just don't figure out why you have to move to WenQuanYi Zen Hei for Chinese characters. Moreover, you seem to have no convincing reason about the idea behind this decision making. The visual appearance provided by WenQuanYi Micro Hei is absolutely the best choice from the eyes of Chinese readers. This is my point of view. Hope that we will have better configuration for Chinese users in the futer. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1173571 Title: please add wenquanyi micro hei settings back with 69-language- selector-zh-tw.conf Status in “language-selector” package in Ubuntu: Confirmed Bug description: In quantal and previous version of ubuntu, we use WenQuanYi Micro Hei as default Chinese (Traditional) fonts for Sans, Monospace. However, the default font is set to WenQuanYi Zen Hei in 0.110 version provided by Raring. It is a regression that most of Chinese (Traditional) users don't appreciate this change. We would like to use WenQuanYi Micro Hei as before. I changed the conf provided by raring to fit we Chinese (Traditional) users more to have WenQuanYi Micro Hei back. Please accept the patch. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/language-selector/+bug/1173571/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184174] [NEW] fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
Public bug reported: running update to .44 kernel when this occurred. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: fglrx 2:8.960-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-44.69-generic-pae 3.2.44 Uname: Linux 3.2.0-44-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDmesg: [ 27.262585] type=1400 audit(1369500222.559:25): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/freshclam" name="/usr/share/samba/upcase.dat" pid=1345 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0 [ 27.262614] type=1400 audit(1369500222.559:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/freshclam" name="/usr/share/samba/lowcase.dat" pid=1345 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0 [ 36.752017] eth0: no IPv6 routers present DKMSKernelVersion: 3.2.0-44-generic-pae Date: Sat May 25 11:15:58 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu DkmsStatus: fglrx, 8.960, 3.2.0-40-generic-pae, i686: installed fglrx, 8.960, 3.2.0-41-generic-pae, i686: installed fglrx, 8.960, 3.2.0-43-generic-pae, i686: installed GraphicsCard: Advanced Micro Devices [AMD] nee ATI RV670PRO [Radeon HD 3850] [1002:9505] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI RV670PRO [Radeon HD 3850] [1002:9505] InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423.2) MachineType: SYX snc302eeh MarkForUpload: True PackageVersion: 2:8.960-0ubuntu1.1 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-44-generic-pae root=UUID=d415329f-fe78-468e-9d16-168a98e4fc15 ro quiet splash vt.handoff=7 SourcePackage: fglrx-installer Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', '-f'] failed with exit code 1: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 23 Current serial number in output stream: 23 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/13/2003 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: 6.00 PG dmi.board.name: P4PB 400-FL dmi.board.vendor: Via Tech dmi.board.version: Via P4X400\8235 dmi.chassis.type: 3 dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvr6.00PG:bd03/13/2003:svnSYX:pnsnc302eeh:pvr:rvnViaTech:rnP4PB400-FL:rvrViaP4X400\8235:cvn:ct3:cvr: dmi.product.name: snc302eeh dmi.sys.vendor: SYX version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.43-0ubuntu0.0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.5 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.13 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 ** Affects: fglrx-installer (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1184174 Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build Status in “fglrx-installer” package in Ubuntu: New Bug description: running update to .44 kernel when this occurred. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: fglrx 2:8.960-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-44.69-generic-pae 3.2.44 Uname: Linux 3.2.0-44-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDmesg: [ 27.262585] type=1400 audit(1369500222.559:25): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/freshclam" name="/usr/share/samba/upcase.dat" pid=1345 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0 [ 27.262614] type=1400 audit(1369500222.559:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/freshclam" name="/usr/share/samba/lowcase.dat" pid=1345 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0 [ 36.752017] eth0: no IPv6 routers present DKMSKernelVersion: 3.2.0-44-generic-pae Date: Sat May 25 11:15:58 2013 DistUpgraded: Fresh install DistroCodename: prec
[Desktop-packages] [Bug 963736] Re: thunderbird and firefox freeze at random : must be killed and restarted
Starbuck, this is the link: https://www.dropbox.com/s/wwoz8nqpzdax0x7/gtk2-engines- oxygen_1.3.3-1ubuntu1_i386.deb -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/963736 Title: thunderbird and firefox freeze at random : must be killed and restarted Status in “firefox” package in Ubuntu: Confirmed Status in “thunderbird” package in Ubuntu: Confirmed Bug description: Thunderbird freezes at random. I must kill it then reload it. Sometimes the freeze happens when sending a mail. I had no problem in 11.10. It happens several times a day. The only pattern that I can currently see is that the freeze happens frequently when thunderbird is using the network. $ lsb_release -rd Description: Ubuntu precise (development branch) Release: 12.04 $ dpkg-query -s thunderbird Package: thunderbird Status: install ok installed Priority: optional Section: mail Installed-Size: 45256 Maintainer: Ubuntu Mozilla Team Architecture: amd64 Version: 11.0+build1-0ubuntu1 [...] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/963736/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184174] Re: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1184174 Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build Status in “fglrx-installer” package in Ubuntu: New Bug description: running update to .44 kernel when this occurred. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: fglrx 2:8.960-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-44.69-generic-pae 3.2.44 Uname: Linux 3.2.0-44-generic-pae i686 ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDmesg: [ 27.262585] type=1400 audit(1369500222.559:25): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/freshclam" name="/usr/share/samba/upcase.dat" pid=1345 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0 [ 27.262614] type=1400 audit(1369500222.559:26): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/freshclam" name="/usr/share/samba/lowcase.dat" pid=1345 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=117 ouid=0 [ 36.752017] eth0: no IPv6 routers present DKMSKernelVersion: 3.2.0-44-generic-pae Date: Sat May 25 11:15:58 2013 DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu DkmsStatus: fglrx, 8.960, 3.2.0-40-generic-pae, i686: installed fglrx, 8.960, 3.2.0-41-generic-pae, i686: installed fglrx, 8.960, 3.2.0-43-generic-pae, i686: installed GraphicsCard: Advanced Micro Devices [AMD] nee ATI RV670PRO [Radeon HD 3850] [1002:9505] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI RV670PRO [Radeon HD 3850] [1002:9505] InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423.2) MachineType: SYX snc302eeh MarkForUpload: True PackageVersion: 2:8.960-0ubuntu1.1 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-44-generic-pae root=UUID=d415329f-fe78-468e-9d16-168a98e4fc15 ro quiet splash vt.handoff=7 SourcePackage: fglrx-installer Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', '-f'] failed with exit code 1: X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 23 Current serial number in output stream: 23 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/13/2003 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: 6.00 PG dmi.board.name: P4PB 400-FL dmi.board.vendor: Via Tech dmi.board.version: Via P4X400\8235 dmi.chassis.type: 3 dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvr6.00PG:bd03/13/2003:svnSYX:pnsnc302eeh:pvr:rvnViaTech:rnP4PB400-FL:rvrViaP4X400\8235:cvn:ct3:cvr: dmi.product.name: snc302eeh dmi.sys.vendor: SYX version.compiz: compiz 1:0.9.7.12-0ubuntu1 version.libdrm2: libdrm2 2.4.43-0ubuntu0.0.1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.5 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.13 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1184174/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1118719] Re: Touchpad setting does not "lock in" when you change from default
I reported this back in February...I hope it will be assigned soonit's a previous obvious bug and i am surprised it wasn't noticed by the developers from the beginning...and it affects everyone who uses ubuntunot just those who have left comments here or affirmed that it affects them also...i had posted in ubuntu forums about it and asked everyone to check and all the people who replied noted the same thing...so please try to assign someone to it soon...thanks. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1118719 Title: Touchpad setting does not "lock in" when you change from default Status in “gnome-control-center” package in Ubuntu: Confirmed Bug description: On Ubuntu 13.04, when you go to system settings and adjust the pointer speed to a lower or higher number then the "default" it does not stay locked in when you close the program window... If you open the program again and check the pointer speed setting, it shows as being right back to the default again... I observed this bug not only when i ran the live session daily build of 13.04, but also after i actually installed it as well... From feedback in the ubuntu forum about this, many others have observed having this bug also on their installed 13.04... To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1118719/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1173571] Re: please change wenquanyi micro hei back with 69-language-selector-zh-tw.conf
** Summary changed: - please add wenquanyi micro hei settings back with 69-language-selector-zh-tw.conf + please change wenquanyi micro hei back with 69-language-selector-zh-tw.conf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1173571 Title: please change wenquanyi micro hei back with 69-language-selector-zh- tw.conf Status in “language-selector” package in Ubuntu: Confirmed Bug description: In quantal and previous version of ubuntu, we use WenQuanYi Micro Hei as default Chinese (Traditional) fonts for Sans, Monospace. However, the default font is set to WenQuanYi Zen Hei in 0.110 version provided by Raring. It is a regression that most of Chinese (Traditional) users don't appreciate this change. We would like to use WenQuanYi Micro Hei as before. I changed the conf provided by raring to fit we Chinese (Traditional) users more to have WenQuanYi Micro Hei back. Please accept the patch. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/language-selector/+bug/1173571/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1173571] Re: please change wenquanyi micro hei back with 69-language-selector-zh-tw.conf
I think that my title is not well described and does not fit my idea well, so I change that. Maybe that mislead readers to think that I was asking to add those outdated settings about Micro Hei back in language-selector confs, but that's not. To be clear, I just want to make Micro Hei back as the default Chinese character displaying font for sans-serif and monospace as it was. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1173571 Title: please change wenquanyi micro hei back with 69-language-selector-zh- tw.conf Status in “language-selector” package in Ubuntu: Confirmed Bug description: In quantal and previous version of ubuntu, we use WenQuanYi Micro Hei as default Chinese (Traditional) fonts for Sans, Monospace. However, the default font is set to WenQuanYi Zen Hei in 0.110 version provided by Raring. It is a regression that most of Chinese (Traditional) users don't appreciate this change. We would like to use WenQuanYi Micro Hei as before. I changed the conf provided by raring to fit we Chinese (Traditional) users more to have WenQuanYi Micro Hei back. Please accept the patch. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/language-selector/+bug/1173571/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 743941] Re: indicator-weather crashed with SIGABRT in raise()
And it needs gir1.2-gconf-2.0 to start https://bugs.launchpad.net/weather-indicator/+bug/1182790 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to indicator-weather in Ubuntu. https://bugs.launchpad.net/bugs/743941 Title: indicator-weather crashed with SIGABRT in raise() Status in Indicator-Weather: Fix Released Status in “indicator-weather” package in Ubuntu: Fix Released Bug description: Binary package hint: indicator-weather Application just crashed. ProblemType: Crash DistroRelease: Ubuntu 11.04 Package: indicator-weather 11.03.20+repack-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-7.39-generic 2.6.38 Uname: Linux 2.6.38-7-generic x86_64 NonfreeKernelModules: wl Architecture: amd64 CrashCounter: 1 Date: Sun Mar 27 19:19:42 2011 ExecutablePath: /usr/bin/indicator-weather InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Alpha amd64 (20110120) InterpreterPath: /usr/bin/python2.7 ProcCmdline: /usr/bin/python /usr/bin/indicator-weather ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash Signal: 6 SourcePackage: indicator-weather StacktraceTop: raise () from /lib/x86_64-linux-gnu/libc.so.6 abort () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /lib/x86_64-linux-gnu/libc.so.6 Title: indicator-weather crashed with SIGABRT in raise() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare To manage notifications about this bug go to: https://bugs.launchpad.net/weather-indicator/+bug/743941/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 989311] Re: Dialog for saving multiple images is too small
I am currently experiencing this bug on my Ubuntu 12.04.2 LTS. Is it normal and is there a way for me to have it fixed? Thank you, Andrea -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to eog in Ubuntu. https://bugs.launchpad.net/bugs/989311 Title: Dialog for saving multiple images is too small Status in Eye of GNOME: Fix Released Status in “eog” package in Ubuntu: Triaged Bug description: I came across this minor but annoying behaviour of Eye of GNOME. When making changes to some images (i.e. rotate the picture to the correct position) the program prompts user for confirmation when he tries to close it. EOG asks user to confirm the changes he has made to very single picture, exposing a list of the pictures that were modified. The problem is that the list is costrained into a very tight box, so that the user can only see the first element; there can be two or twelve, only the first one will be shown and there is not even the chance to enlarge the box since its dimension is fixed. Moreover, with Ubuntu's overlay scrollbars there is not even clear that the list can be scrolled down since the bar is almost invisible. I find this is pointless and I supoose should be very easy to fix. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: eog 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic i686 ApportVersion: 2.0.1-0ubuntu6 Architecture: i386 CheckboxSubmission: 671bbedab79a1294d37767cd3e570ddf CheckboxSystem: 0531969bcfd4f03af7405c98dc94a948 Date: Fri Apr 27 00:42:20 2012 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Beta i386 (20110413) SourcePackage: eog UpgradeStatus: Upgraded to precise on 2012-04-12 (14 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/eog/+bug/989311/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1069843] Re: Nautilus consuming memory and cpu
I just have tried it and it's working again. The only thing I did are the "normal" updates, so I do not know what fixed the problem. Ubuntu 12.10 (64-Bit), Gnome 3.6.0 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1069843 Title: Nautilus consuming memory and cpu Status in “nautilus” package in Ubuntu: Confirmed Bug description: I noticed that Nautilus seemed sluggish after updating to 12.10 yesterday. Clicks in the window may take a moment to register and the right click menu takes a few seconds to draw. This happens in nautilus windows and on the desktop, but I have not seen this behaviour in any other windows. I checked nautilus in the system-monitor and found that it was eating an excesive amount of memory (14.1/16 gb) and 72% of one cpu-core constantly. The memory starts out low at ~300mb ram and creeps up from there. Ubuntu 12.10 nautilus: Installed: 1:3.5.90.really.3.4.2-0ubuntu4 Candidate: 1:3.5.90.really.3.4.2-0ubuntu4 Version table: *** 1:3.5.90.really.3.4.2-0ubuntu4 0 500 http://us.archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages 100 /var/lib/dpkg/status I've not filed an Ubuntu bug before and am somewhat unfamiliar with the process, so please let me know if there are reports or commands I can run that might be of more use. Thanks. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: nautilus 1:3.5.90.really.3.4.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5 Uname: Linux 3.5.0-17-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.6.1-0ubuntu3 Architecture: amd64 Date: Mon Oct 22 10:09:01 2012 ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'907x713+0+24'" InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: nautilus UpgradeStatus: Upgraded to quantal on 2012-10-21 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1069843/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1182007] Re: Failed to SUID root
My syslog is full of messages like these... signond[3587]: ../../../../src/signond/signondaemon.cpp 360 init Failed to SUID root. Secure storage will not be available. signond[3671]: ../../../../src/signond/signondaemon.cpp 360 init Failed to SUID root. Secure storage will not be available. And now and then the online accounts (Facebook, Twitter, Google) are losing their authorisation with this message in /var/log/syslog... May 25 19:46:41 eeepc signond[3671]: ../../../../src/signond/signonsessioncore.cpp 528 processStoreOperation Error occured while storing data. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to signon in Ubuntu. https://bugs.launchpad.net/bugs/1182007 Title: Failed to SUID root Status in “signon” package in Ubuntu: Confirmed Bug description: signond[7451]: ../../../../src/signond/signondaemon.cpp 360 init Failed to SUID root. Secure storage will not be available. This report appears in syslog each time Empathy tries and fails to connect to Google Talk using the google-talkplugin interface. It is not clear whether this SUID report is related to the Empathy failure. See bug #1168582 "Google talk "Requires Authorization" after suspend/resume" To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/signon/+bug/1182007/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184178] [NEW] [MS-7698, ATI R6xx HDMI, Digital Out, HDMI] fails after a while
Public bug reported: Sound is available after booting but goes away after 5-120 minutes. Sound failure does not appear to be associated with anything other than the passage of time. This problem appeared after I ran an upgrade on 2013-05-18 which affected 82 packages, notably alsa-utils:i386 (1.0.25-1ubuntu5, 1.0.25-1ubuntu5.2), libasound2:i386 (1.0.25-1ubuntu10.1, 1.0.25-1ubuntu10.2), Previously the system had worked flawlessly for many months. Thank you. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: alsa-base 1.0.25+dfsg-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-44.69-generic-pae 3.2.44 Uname: Linux 3.2.0-44-generic-pae i686 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 44' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC887-VD' Components : 'HDA:10ec0887,10ec0887,00100302' Controls : 45 Simple ctrls : 21 Date: Sat May 25 11:04:56 2013 InstallationMedia: Mythbuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) MarkForUpload: True PackageArchitecture: all ProcEnviron: TERM=cygwin PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_Card: Built-in Audio - HD-Audio Generic Symptom_Jack: Digital Out, HDMI Symptom_Type: Sound works for a while, then breaks Title: [MS-7698, ATI R6xx HDMI, Digital Out, HDMI] fails after a while UpgradeStatus: Upgraded to precise on 2012-05-18 (372 days ago) dmi.bios.date: 03/14/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.4 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: E350IA-E45 (MS-7698) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.4:bd03/14/2011:svnMSI:pnMS-7698:pvr1.0:rvnMSI:rnE350IA-E45(MS-7698):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.name: MS-7698 dmi.product.version: 1.0 dmi.sys.vendor: MSI ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1184178 Title: [MS-7698, ATI R6xx HDMI, Digital Out, HDMI] fails after a while Status in “alsa-driver” package in Ubuntu: New Bug description: Sound is available after booting but goes away after 5-120 minutes. Sound failure does not appear to be associated with anything other than the passage of time. This problem appeared after I ran an upgrade on 2013-05-18 which affected 82 packages, notably alsa-utils:i386 (1.0.25-1ubuntu5, 1.0.25-1ubuntu5.2), libasound2:i386 (1.0.25-1ubuntu10.1, 1.0.25-1ubuntu10.2), Previously the system had worked flawlessly for many months. Thank you. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: alsa-base 1.0.25+dfsg-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-44.69-generic-pae 3.2.44 Uname: Linux 3.2.0-44-generic-pae i686 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 44' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC887-VD' Components : 'HDA:10ec0887,10ec0887,00100302' Controls : 45 Simple ctrls : 21 Date: Sat May 25 11:04:56 2013 InstallationMedia: Mythbuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) MarkForUpload: True PackageArchitecture: all ProcEnviron: TERM=cygwin PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_Card: Built-in Audio - HD-Audio Generic Symptom_Jack: Digital Out, HDMI Symptom_Type: Sound works for a while, then breaks Title: [MS-7698, ATI R6xx HDMI, Digital Out, HDMI] fails after a while UpgradeStatus: Upgraded to precise on 2012-05-18 (372 days ago) dmi.bios.date: 03/14/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.4 dmi.boa
[Desktop-packages] [Bug 1173679] Re: Login to Flickr using Google ID
I attach a screenshot of the problem ** Attachment added: "Online Accounts_001.png" https://bugs.launchpad.net/ubuntu/+source/account-plugins/+bug/1173679/+attachment/3686684/+files/Online%20Accounts_001.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to account-plugins in Ubuntu. https://bugs.launchpad.net/bugs/1173679 Title: Login to Flickr using Google ID Status in “account-plugins” package in Ubuntu: Confirmed Bug description: I login to Flickr via my Google account. When I try to connect through the online accounts the only option I have is to use a Yahoo! ID, which I don't have. The login should allow all valid Flickr sign in methods. (Ubuntu 13.04 64bit, Friends version 0.1.3daily13.04.17.1~13.04-0ubuntu1) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/account-plugins/+bug/1173679/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184186] [NEW] Macbook running Ubuntu 13.04 stop working when suspended
Public bug reported: I am using Ubuntu 13.04 in macbook retina and everytime I suspend (or suspend closing) the notebook its screen stays completely black and I can heard the sound that it is still working, it does not suspend and it does not return from this state. I tried to click on all keyboard keys and some combinations as well as using the touchpad. Anyway, it really does not work after being suspended. It continues on (does not really suspend) and does not work so that I have to hold the turn off button and turn it on again. I think this is a main issue, and probably others are having the same problem (maybe not just with macs). ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1184186 Title: Macbook running Ubuntu 13.04 stop working when suspended Status in “gnome-control-center” package in Ubuntu: New Bug description: I am using Ubuntu 13.04 in macbook retina and everytime I suspend (or suspend closing) the notebook its screen stays completely black and I can heard the sound that it is still working, it does not suspend and it does not return from this state. I tried to click on all keyboard keys and some combinations as well as using the touchpad. Anyway, it really does not work after being suspended. It continues on (does not really suspend) and does not work so that I have to hold the turn off button and turn it on again. I think this is a main issue, and probably others are having the same problem (maybe not just with macs). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1184186/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1066529] Re: All jobs stopped, epson_inkjet_printer_filter failed
After an update to cups 1.5.3-0ubuntu8 and installation of the just released PC-FAX Driver 1.0.0 from here: http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=EN&CN2=&DSCMI=22162&DSCCHK=d925d1458a086f13e41b4d498db14fae21da522f my printer refuses to print again, exactly as the original issue. Removing the fax package, removing the printer driver and installing the printer driver once again does not resolve the problem. Will appreciate any help. ** Changed in: cups (Ubuntu) Status: Fix Released => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1066529 Title: All jobs stopped, epson_inkjet_printer_filter failed Status in “cups” package in Ubuntu: New Bug description: Kubuntu 12.04.1 64bit Cups 1.5.3-0ubuntu4 EPSON WF-7520 - epson-inkjet-printer 1.0.0-1lsb3.2 - the last driver from Epson. Connected via USB. The printer just stopped to print - every job added in "stopped" state and this error: "/opt/epson-inkjet-printer-201115w/cups/lib/filter/epson_inkjet_printer_filter failed" The printer screen says "Printing" endless. Will happy to provide additional info to resolve this issue. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1066529/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1177120] Re: [ilk mesa] GPU hangs
*** This bug is a duplicate of bug 1176653 *** https://bugs.launchpad.net/bugs/1176653 ** Description changed: - Every once in a while, my Intel GPU hangs and I can't start OpenGL - programs unless I reboot. Furthermore, rebooting hangs, so I need to - forcefully power off the computer. + Once in a while, my Intel GPU hangs and I can't start OpenGL programs + unless I reboot. Furthermore, rebooting hangs, so I need to forcefully + power off the computer. From dmesg: [81897.515907] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [81897.515917] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [81899.514784] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [81899.515084] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged! [81899.515091] [drm:i915_reset] *ERROR* Failed to reset chip. Trying to run glxgears after the problem happens: > glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. intel_do_flush_locked failed: Input/output error ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Tue May 7 00:14:14 2013 DistUpgraded: 2013-05-01 14:08:06,272 DEBUG enabling apt cron job DistroCodename: raring DistroVariant: ubuntu EcryptfsInUse: Yes InstallationDate: Installed on 2010-11-25 (893 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) MachineType: Dell Inc. Vostro 3500 MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=8e428896-c84c-497b-adde-e5de672f1bba ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to raring on 2013-05-01 (5 days ago) dmi.bios.date: 09/10/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0G2R51 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA08:bd09/10/2010:svnDellInc.:pnVostro3500:pvrNotSpecified:rvnDellInc.:rn0G2R51:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3500 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.43-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.1-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.1-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1177120 Title: [ilk mesa] GPU hangs Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Once in a while, my Intel GPU hangs and I can't start OpenGL programs unless I reboot. Furthermore, rebooting hangs, so I need to forcefully power off the computer. From dmesg: [81897.515907] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [81897.515917] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [81899.514784] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [81899.515084] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged! [81899.515091] [drm:i915_reset] *ERROR* Failed to reset chip. Trying to run glxgears after the problem happens: > glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. intel_do_flush_locked failed: Input/output error ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Tue May 7 00:14:14 2013 DistUpgraded: 2013-05-01 14:08:06,272 DEBUG enabling apt cron job DistroCodename: raring DistroVariant: ubuntu EcryptfsInUse: Yes InstallationDate: Installed on 2010-11-25 (893 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
[Desktop-packages] [Bug 1183368]
Unreproducible due to option noted in Description not being available in: Version: 4.2.0.0.alpha0+ Build ID: 979def88090633bfee0e0445b1a1dac71ed Microsoft Windows Vista Business x86 6.0.6002 Service Pack 2 Build 6002 Would this functionality be provided by an extension? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1183368 Title: EDITING: Find by format doesn't work with non-integer font sizes Status in LibreOffice Productivity Suite: Incomplete Status in “libreoffice” package in Ubuntu: Incomplete Bug description: Find by formatting doesn't return any results if a non-integer font size is returned. To reproduce: 1. Enter some text in font size 11pt 2. Enter some more text in font size 11.5pt 3. Open the Find & Replace dialog (CTRL+H) 4. Click More Options 5. Click Format 6. Enter 11.5pt into the Size box. 7. Click ok and then Find 8. Observe 'Search key not found' error Trying the same but entering 11pt at step 6 works fine so the problem seems to be specific to non-integer font sizes. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: libreoffice-writer 1:4.0.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Thu May 23 15:01:20 2013 MarkForUpload: True SourcePackage: libreoffice UpgradeStatus: Upgraded to raring on 2013-04-30 (23 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1183368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1177120] Re: [ilk mesa] GPU hangs
*** This bug is a duplicate of bug 1176653 *** https://bugs.launchpad.net/bugs/1176653 ** This bug has been marked a duplicate of bug 1176653 [ilk mesa] *ERROR* GPU hanging too fast, declaring wedged! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1177120 Title: [ilk mesa] GPU hangs Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Once in a while, my Intel GPU hangs and I can't start OpenGL programs unless I reboot. Furthermore, rebooting hangs, so I need to forcefully power off the computer. From dmesg: [81897.515907] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [81897.515917] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [81899.514784] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [81899.515084] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged! [81899.515091] [drm:i915_reset] *ERROR* Failed to reset chip. Trying to run glxgears after the problem happens: > glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. intel_do_flush_locked failed: Input/output error ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Tue May 7 00:14:14 2013 DistUpgraded: 2013-05-01 14:08:06,272 DEBUG enabling apt cron job DistroCodename: raring DistroVariant: ubuntu EcryptfsInUse: Yes InstallationDate: Installed on 2010-11-25 (893 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) MachineType: Dell Inc. Vostro 3500 MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=8e428896-c84c-497b-adde-e5de672f1bba ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to raring on 2013-05-01 (5 days ago) dmi.bios.date: 09/10/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0G2R51 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA08:bd09/10/2010:svnDellInc.:pnVostro3500:pvrNotSpecified:rvnDellInc.:rn0G2R51:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3500 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.43-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.1-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.1-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1177120/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1183368] Re: EDITING: Find by format doesn't work with non-integer font sizes
** Changed in: df-libreoffice Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1183368 Title: EDITING: Find by format doesn't work with non-integer font sizes Status in LibreOffice Productivity Suite: Incomplete Status in “libreoffice” package in Ubuntu: Incomplete Bug description: Find by formatting doesn't return any results if a non-integer font size is returned. To reproduce: 1. Enter some text in font size 11pt 2. Enter some more text in font size 11.5pt 3. Open the Find & Replace dialog (CTRL+H) 4. Click More Options 5. Click Format 6. Enter 11.5pt into the Size box. 7. Click ok and then Find 8. Observe 'Search key not found' error Trying the same but entering 11pt at step 6 works fine so the problem seems to be specific to non-integer font sizes. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: libreoffice-writer 1:4.0.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Thu May 23 15:01:20 2013 MarkForUpload: True SourcePackage: libreoffice UpgradeStatus: Upgraded to raring on 2013-04-30 (23 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1183368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1183794] Re: Libreoffice 4 Base: No report generation when sorting order
Thanks a lot for your kind answer and for your work. I'll report the bug where it belongs. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1183794 Title: Libreoffice 4 Base: No report generation when sorting order Status in “libreoffice” package in Ubuntu: Invalid Bug description: I'm using Ubuntu 12.04 precise (amd64) and the Libreoffice 4.0 ppa. However, the bug that I have encountered also takes place with the official deb packages from www.libreoffice.org. Every time I generate a report that is sorted alphabetically or in any way, I always get this: 24-may-2013 14:09:18 com.sun.star.wizards.db.DBMetaData$CommandObject GRAVE: null com.sun.star.uno.RuntimeException: [jni_uno bridge error] Java calling UNO method getByName: [map_to_uno():string] null-ref given! java stack trace: at com.sun.star.bridges.jni_uno.JNI_proxy.dispatch_call(Native Method) at com.sun.star.bridges.jni_uno.JNI_proxy.invoke(JNI_proxy.java:183) at com.sun.proxy.$Proxy17.getByName(Unknown Source) at com.sun.star.wizards.db.DBMetaData$CommandObject.(DBMetaData.java:305) at com.sun.star.wizards.db.DBMetaData.getCommandByName(DBMetaData.java:272) at com.sun.star.wizards.db.DBMetaData.getTableByName(DBMetaData.java:251) at com.sun.star.wizards.db.CommandMetaData.getColumnObjectByFieldName(CommandMetaData.java:146) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:182) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:149) at com.sun.star.wizards.report.ReportTextImplementation.reconnectToDatabase(ReportTextImplementation.java:286) at com.sun.star.wizards.report.Dataimport.importReportData(Dataimport.java:196) at com.sun.star.wizards.report.Dataimport.createReport(Dataimport.java:212) at com.sun.star.wizards.report.CallReportWizard$ReportWizardImplementation.trigger(CallReportWizard.java:104) at com.sun.star.bridges.jni_uno.JNI_proxy.dispatch_call(Native Method) at com.sun.star.bridges.jni_uno.JNI_proxy.invoke(JNI_proxy.java:183) at com.sun.proxy.$Proxy17.getByName(Unknown Source) at com.sun.star.wizards.db.DBMetaData$CommandObject.(DBMetaData.java:305) at com.sun.star.wizards.db.DBMetaData.getCommandByName(DBMetaData.java:272) at com.sun.star.wizards.db.DBMetaData.getTableByName(DBMetaData.java:251) at com.sun.star.wizards.db.CommandMetaData.getColumnObjectByFieldName(CommandMetaData.java:146) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:182) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:149) at com.sun.star.wizards.report.ReportTextImplementation.reconnectToDatabase(ReportTextImplementation.java:286) at com.sun.star.wizards.report.Dataimport.importReportData(Dataimport.java:196) at com.sun.star.wizards.report.Dataimport.createReport(Dataimport.java:212) at com.sun.star.wizards.report.CallReportWizard$ReportWizardImplementation.trigger(CallReportWizard.java:104) java.lang.NullPointerException at com.sun.star.wizards.db.CommandMetaData.getColumnObjectByFieldName(CommandMetaData.java:147) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:182) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:149) at com.sun.star.wizards.report.ReportTextImplementation.reconnectToDatabase(ReportTextImplementation.java:286) at com.sun.star.wizards.report.Dataimport.importReportData(Dataimport.java:196) at com.sun.star.wizards.report.Dataimport.createReport(Dataimport.java:212) at com.sun.star.wizards.report.CallReportWizard$ReportWizardImplementation.trigger(CallReportWizard.java:104) 24-may-2013 14:09:18 com.sun.star.wizards.report.ReportTextImplementation reconnectToDatabase GRAVE: null com.sun.star.sdbc.SQLException: La columna no es válida. at com.sun.star.bridges.jni_uno.JNI_proxy.dispatch_call(Native Method) at com.sun.star.bridges.jni_uno.JNI_proxy.invoke(JNI_proxy.java:183) at com.sun.proxy.$Proxy63.appendOrderByColumn(Unknown Source) at com.sun.star.wizards.db.SQLQueryComposer.appendSortingCriterion(SQLQueryComposer.java:186) at com.sun.star.wizards.db.SQLQueryComposer.prependSortingCriteria(SQLQueryComposer.java:158) at
[Desktop-packages] [Bug 1111884] Re: nouveau fails at suspend/resume - PAGE_NOT_PRESENT
Workaround options for hybrid video systems: Option 1. In BIOS switch to use only embedded video card (for example UMA only for Lenovo Ideapad Z580A). Option 2. In BIOS use Optimus video and blacklist nouveau: sudo gedit /etc/modprobe.d/blacklist.conf Add a line to the end of file: blacklist nouveau Save, close file and restart. (sudo rmmod nouveau does not helpful becaude nouveau is in use). Now if required optimus graphic You can run (and disable suspend until next reboot because rmmod does not work): sudo modprobe nouveau -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/884 Title: nouveau fails at suspend/resume - PAGE_NOT_PRESENT Status in The Linux Kernel: New Status in Accelerated Xorg driver for nVidia cards: New Status in “xserver-xorg-video-nouveau” package in Ubuntu: Confirmed Bug description: Happens when resuming from standby. Can be reproduced. Every time. nouveau E[ PFB][:05:00.0] trapped read at 0x002001a020 on channel 0x0001fae9 SEMAPHORE_BG/PFIFO_READ/00 reason: PAGE_NOT_PRESENT nouveau E[ PFB][:05:00.0] trapped write at 0x002001a020 on channel 0x0001fae9 PFIFO/PFIFO_READ/SEMAPHORE reason: PAGE_NOT_PRESENT nouveau E[ PGRAPH][:05:00.0] TRAP_TPDMA_2D - TP 0 - Unknown fault at address 00449b nouveau E[ PGRAPH][:05:00.0] TRAP_TPDMA_2D - TP 0 - e0c: , e18: , e1c: , e20: 0011, e24: 0c03 nouveau E[ PGRAPH][:05:00.0] TRAP nouveau E[ PGRAPH][:05:00.0] ch 2 [0x001fae9000] subc 2 class 0x502d mthd 0x060c data 0x04b0 nouveau E[ PFB][:05:00.0] trapped write at 0x00449b on channel 0x0001fae9 PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT nouveau E[ PGRAPH][:05:00.0] magic set 0: nouveau E[ PGRAPH][:05:00.0] 0x00408904: 0x20087701 nouveau E[ PGRAPH][:05:00.0] 0x00408908: 0x00449b00 nouveau E[ PGRAPH][:05:00.0] 0x0040890c: 0x8432 nouveau E[ PGRAPH][:05:00.0] 0x00408910: 0x9b00 nouveau E[ PGRAPH][:05:00.0] TRAP_TEXTURE - TP0: Unhandled ustatus 0x0003 nouveau E[ PGRAPH][:05:00.0] TRAP ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: xserver-xorg-core 2:1.13.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-2.6-generic 3.8.0-rc4 Uname: Linux 3.8.0-2-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.8-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CrashCounter: 1 Date: Thu Jan 31 22:17:49 2013 DistUpgraded: 2013-01-30 03:34:50,679 DEBUG enabling apt cron job DistroCodename: raring DistroVariant: ubuntu ExecutablePath: /usr/bin/Xorg ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation G92 [GeForce 8800 GT] [10de:0611] (rev a2) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:2330] MachineType: System manufacturer System Product Name MarkForUpload: True ProcCmdline: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-2-generic root=UUID=615f02d8-8bf1-4c07-bf26-9f8b2230d6d6 ro pcie_aspm=force Signal: 6 SourcePackage: xorg-server StacktraceTop: ?? () from /usr/lib/xorg/modules/libexa.so ?? () from /usr/lib/xorg/modules/libexa.so ?? () from /usr/lib/xorg/modules/libexa.so ?? () from /usr/lib/xorg/modules/libexa.so ?? () from /usr/lib/xorg/modules/libexa.so Title: Xorg crashed with SIGABRT UpgradeStatus: Upgraded to raring on 2013-01-30 (1 days ago) UserGroups: dmi.bios.date: 12/24/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0806 dmi.board.name: P5WD2-Premium dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0806:bd12/24/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5WD2-Premium:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.9~daily13.01.25-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.41-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1
[Desktop-packages] [Bug 1152165]
On the same machine, I tried running SuperTuxKart on Arch Linux with Linux kernel 3.10-rc2, mesa 9.1.2 and Intel drivers 2.21.6. I seemed to get the same hang, even though 3.10-rc2 contains the above- mentioned commit. I will attach the error state and relevant dmesg log. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1152165 Title: [ivb] GPU lockup IPEHR: 0x upon context restore Status in X.org xf86-video-intel: Confirmed Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Had SuperTuxKart open and Chromium running in the background; then computer locked up. ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-11.20-generic 3.8.2 Uname: Linux 3.8.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Mar 7 08:09:00 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu DkmsStatus: virtualbox, 4.1.22, 3.8.0-11-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-4-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-6-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-7-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-8-generic, x86_64: installed DuplicateSignature: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 Ubuntu 13.04 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py ExtraDebuggingInterest: Yes, if not too technical GpuHangFrequency: This is the first time GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00fd] InstallationDate: Installed on 2013-01-18 (48 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64+mac (20130117) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookAir5,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-11-generic root=UUID=ceb00db8-a161-4759-80d9-a9fce83fe29f ro i915.i915_enable_rc6=1 RelatedPackageVersions: xserver-xorg 1:7.7+1ubuntu4 libdrm2 2.4.42-0ubuntu1 xserver-xorg-video-intel 2:2.21.3-0ubuntu1 SourcePackage: xserver-xorg-video-intel Title: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/27/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA51.88Z.00EF.B02.1211271028 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-66F35F19FE2A0D05 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir5,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-66F35F19FE2A0D05 dmi.modalias: dmi:bvnAppleInc.:bvrMBA51.88Z.00EF.B02.1211271028:bd11/27/2012:svnAppleInc.:pnMacBookAir5,1:pvr1.0:rvnAppleInc.:rnMac-66F35F19FE2A0D05:rvrMacBookAir5,1:cvnAppleInc.:ct10:cvrMac-66F35F19FE2A0D05: dmi.product.name: MacBookAir5,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.9~daily13.03.06-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.42-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3 xserver.bootTime: Wed Mar 6 11:28:46 2013 xserver.configfile: default xserver.errors: intel(0): Detected a hung GPU, disabling acceleration. intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.2-0ubuntu2 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1152165/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1152165]
Created attachment 79627 System log from v3.10-rc2 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1152165 Title: [ivb] GPU lockup IPEHR: 0x upon context restore Status in X.org xf86-video-intel: Confirmed Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Had SuperTuxKart open and Chromium running in the background; then computer locked up. ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-11.20-generic 3.8.2 Uname: Linux 3.8.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Mar 7 08:09:00 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu DkmsStatus: virtualbox, 4.1.22, 3.8.0-11-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-4-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-6-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-7-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-8-generic, x86_64: installed DuplicateSignature: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 Ubuntu 13.04 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py ExtraDebuggingInterest: Yes, if not too technical GpuHangFrequency: This is the first time GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00fd] InstallationDate: Installed on 2013-01-18 (48 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64+mac (20130117) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookAir5,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-11-generic root=UUID=ceb00db8-a161-4759-80d9-a9fce83fe29f ro i915.i915_enable_rc6=1 RelatedPackageVersions: xserver-xorg 1:7.7+1ubuntu4 libdrm2 2.4.42-0ubuntu1 xserver-xorg-video-intel 2:2.21.3-0ubuntu1 SourcePackage: xserver-xorg-video-intel Title: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/27/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA51.88Z.00EF.B02.1211271028 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-66F35F19FE2A0D05 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir5,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-66F35F19FE2A0D05 dmi.modalias: dmi:bvnAppleInc.:bvrMBA51.88Z.00EF.B02.1211271028:bd11/27/2012:svnAppleInc.:pnMacBookAir5,1:pvr1.0:rvnAppleInc.:rnMac-66F35F19FE2A0D05:rvrMacBookAir5,1:cvnAppleInc.:ct10:cvrMac-66F35F19FE2A0D05: dmi.product.name: MacBookAir5,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.9~daily13.03.06-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.42-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3 xserver.bootTime: Wed Mar 6 11:28:46 2013 xserver.configfile: default xserver.errors: intel(0): Detected a hung GPU, disabling acceleration. intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.2-0ubuntu2 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1152165/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1152165]
Aye, that appears to be same hang. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1152165 Title: [ivb] GPU lockup IPEHR: 0x upon context restore Status in X.org xf86-video-intel: Confirmed Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Had SuperTuxKart open and Chromium running in the background; then computer locked up. ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-11.20-generic 3.8.2 Uname: Linux 3.8.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Mar 7 08:09:00 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu DkmsStatus: virtualbox, 4.1.22, 3.8.0-11-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-4-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-6-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-7-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-8-generic, x86_64: installed DuplicateSignature: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 Ubuntu 13.04 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py ExtraDebuggingInterest: Yes, if not too technical GpuHangFrequency: This is the first time GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00fd] InstallationDate: Installed on 2013-01-18 (48 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64+mac (20130117) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookAir5,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-11-generic root=UUID=ceb00db8-a161-4759-80d9-a9fce83fe29f ro i915.i915_enable_rc6=1 RelatedPackageVersions: xserver-xorg 1:7.7+1ubuntu4 libdrm2 2.4.42-0ubuntu1 xserver-xorg-video-intel 2:2.21.3-0ubuntu1 SourcePackage: xserver-xorg-video-intel Title: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/27/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA51.88Z.00EF.B02.1211271028 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-66F35F19FE2A0D05 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir5,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-66F35F19FE2A0D05 dmi.modalias: dmi:bvnAppleInc.:bvrMBA51.88Z.00EF.B02.1211271028:bd11/27/2012:svnAppleInc.:pnMacBookAir5,1:pvr1.0:rvnAppleInc.:rnMac-66F35F19FE2A0D05:rvrMacBookAir5,1:cvnAppleInc.:ct10:cvrMac-66F35F19FE2A0D05: dmi.product.name: MacBookAir5,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.9~daily13.03.06-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.42-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3 xserver.bootTime: Wed Mar 6 11:28:46 2013 xserver.configfile: default xserver.errors: intel(0): Detected a hung GPU, disabling acceleration. intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.2-0ubuntu2 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1152165/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1152165]
Created attachment 79626 i915 error state from v3.10-rc2 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1152165 Title: [ivb] GPU lockup IPEHR: 0x upon context restore Status in X.org xf86-video-intel: Confirmed Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Had SuperTuxKart open and Chromium running in the background; then computer locked up. ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-11.20-generic 3.8.2 Uname: Linux 3.8.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Mar 7 08:09:00 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu DkmsStatus: virtualbox, 4.1.22, 3.8.0-11-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-4-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-6-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-7-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-8-generic, x86_64: installed DuplicateSignature: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 Ubuntu 13.04 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py ExtraDebuggingInterest: Yes, if not too technical GpuHangFrequency: This is the first time GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00fd] InstallationDate: Installed on 2013-01-18 (48 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64+mac (20130117) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookAir5,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-11-generic root=UUID=ceb00db8-a161-4759-80d9-a9fce83fe29f ro i915.i915_enable_rc6=1 RelatedPackageVersions: xserver-xorg 1:7.7+1ubuntu4 libdrm2 2.4.42-0ubuntu1 xserver-xorg-video-intel 2:2.21.3-0ubuntu1 SourcePackage: xserver-xorg-video-intel Title: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/27/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA51.88Z.00EF.B02.1211271028 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-66F35F19FE2A0D05 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir5,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-66F35F19FE2A0D05 dmi.modalias: dmi:bvnAppleInc.:bvrMBA51.88Z.00EF.B02.1211271028:bd11/27/2012:svnAppleInc.:pnMacBookAir5,1:pvr1.0:rvnAppleInc.:rnMac-66F35F19FE2A0D05:rvrMacBookAir5,1:cvnAppleInc.:ct10:cvrMac-66F35F19FE2A0D05: dmi.product.name: MacBookAir5,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.9~daily13.03.06-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.42-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3 xserver.bootTime: Wed Mar 6 11:28:46 2013 xserver.configfile: default xserver.errors: intel(0): Detected a hung GPU, disabling acceleration. intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.2-0ubuntu2 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1152165/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1152165] Re: [ivb] GPU lockup IPEHR: 0xffffffff upon context restore
** Changed in: xserver-xorg-video-intel Status: Fix Released => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1152165 Title: [ivb] GPU lockup IPEHR: 0x upon context restore Status in X.org xf86-video-intel: Confirmed Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: Had SuperTuxKart open and Chromium running in the background; then computer locked up. ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-11.20-generic 3.8.2 Uname: Linux 3.8.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.9-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Mar 7 08:09:00 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu DkmsStatus: virtualbox, 4.1.22, 3.8.0-11-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-4-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-6-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-7-generic, x86_64: installed virtualbox, 4.1.22, 3.8.0-8-generic, x86_64: installed DuplicateSignature: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 Ubuntu 13.04 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py ExtraDebuggingInterest: Yes, if not too technical GpuHangFrequency: This is the first time GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00fd] InstallationDate: Installed on 2013-01-18 (48 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64+mac (20130117) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookAir5,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-11-generic root=UUID=ceb00db8-a161-4759-80d9-a9fce83fe29f ro i915.i915_enable_rc6=1 RelatedPackageVersions: xserver-xorg 1:7.7+1ubuntu4 libdrm2 2.4.42-0ubuntu1 xserver-xorg-video-intel 2:2.21.3-0ubuntu1 SourcePackage: xserver-xorg-video-intel Title: GPU lockup IPEHR: 0x IPEHR: 0x0b140001 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/27/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA51.88Z.00EF.B02.1211271028 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-66F35F19FE2A0D05 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir5,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-66F35F19FE2A0D05 dmi.modalias: dmi:bvnAppleInc.:bvrMBA51.88Z.00EF.B02.1211271028:bd11/27/2012:svnAppleInc.:pnMacBookAir5,1:pvr1.0:rvnAppleInc.:rnMac-66F35F19FE2A0D05:rvrMacBookAir5,1:cvnAppleInc.:ct10:cvrMac-66F35F19FE2A0D05: dmi.product.name: MacBookAir5,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.9~daily13.03.06-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.42-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.2-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.3-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3 xserver.bootTime: Wed Mar 6 11:28:46 2013 xserver.configfile: default xserver.errors: intel(0): Detected a hung GPU, disabling acceleration. intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.13.2-0ubuntu2 xserver.video_driver: intel To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1152165/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 963736] Re: thunderbird and firefox freeze at random : must be killed and restarted
Thanks Leonid, for you it's still freezing? Is only gtk2-engines-oxygen affected or also gtk3-engines-oxygen? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/963736 Title: thunderbird and firefox freeze at random : must be killed and restarted Status in “firefox” package in Ubuntu: Confirmed Status in “thunderbird” package in Ubuntu: Confirmed Bug description: Thunderbird freezes at random. I must kill it then reload it. Sometimes the freeze happens when sending a mail. I had no problem in 11.10. It happens several times a day. The only pattern that I can currently see is that the freeze happens frequently when thunderbird is using the network. $ lsb_release -rd Description: Ubuntu precise (development branch) Release: 12.04 $ dpkg-query -s thunderbird Package: thunderbird Status: install ok installed Priority: optional Section: mail Installed-Size: 45256 Maintainer: Ubuntu Mozilla Team Architecture: amd64 Version: 11.0+build1-0ubuntu1 [...] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/963736/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 410407] Re: Adobe Flash Player dialogues don't respond to mouse clicks
Umm, don't get me wrong, the way you have changed the description might well be a problem that needs fixing, but the original issue that this bug was created to report is not the one related to the new description. The initial bug was for no mouse response to any clicks within the flash, not within dialogues. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to epiphany-browser in Ubuntu. https://bugs.launchpad.net/bugs/410407 Title: Adobe Flash Player dialogues don't respond to mouse clicks Status in Chromium Browser: Invalid Status in Compiz: Invalid Status in The Mozilla Firefox Browser: Invalid Status in Opera Browser: Invalid Status in “adobe-flashplugin” package in Ubuntu: Invalid Status in “epiphany-browser” package in Ubuntu: Invalid Status in “flashplugin-nonfree” package in Ubuntu: Fix Released Status in “gtk+2.0” package in Ubuntu: Invalid Status in “ia32-libs” package in Ubuntu: Invalid Status in “nspluginwrapper” package in Ubuntu: Fix Released Status in “adobe-flashplugin” source package in Lucid: Won't Fix Status in “epiphany-browser” source package in Lucid: Invalid Status in “flashplugin-nonfree” source package in Lucid: Won't Fix Status in “gtk+2.0” source package in Lucid: Won't Fix Status in “ia32-libs” source package in Lucid: Won't Fix Status in “nspluginwrapper” source package in Lucid: Fix Released Status in “flashplugin-nonfree” package in Debian: Fix Released Status in “nspluginwrapper” package in Fedora: Unknown Bug description: *** WARNING *** - This bug report is saturated of comments: only post if you have read all the previous ones and you are sure what you will say is very relevant. - In any other case, just mark the bug as affecting you. HOW TO REPRODUCE 1. Go to a web-page that uses your web-cam. 2. Switch on the web-cam through the interface provided in the web-page. 3. When you are asked to allow the web-cam to be accessed by Adobe Flash, click on the "Allow" button. * BEHAVIOUR * - EXPECTED: The button to be clicked. - REAL: Its impossible to click any button from the Adobe Flash dialogue that appeared. *** WORK-AROUND *** - Use the web-page control panel instead, at http://www.macromedia.com/support/documentation/es/flashplayer/help/settings_manager08.html. RELEVANT DETAILS - Affects any GNOME 3 based desktop environment, which uses 3D desktop effects. - Doesn't affect Unity 2D, KDE, XFCE and LXDE desktop environments. - Affects any web-browser. - Gnash is incompatible with these dialogues too. - "swfdec-mozilla" is now a dummy package for Gnash. - Installing the Flash Player from Adobe's web-page has the same effect. ProblemType: Bug Architecture: amd64 Date: Fri Aug 7 19:22:11 2009 DistroRelease: Ubuntu 9.10 NonfreeKernelModules: nvidia Package: flashplugin-installer 10.0.22.87ubuntu2 ProcEnviron: LANG=en_GB.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-5.24-generic SourcePackage: flashplugin-nonfree Uname: Linux 2.6.31-5-generic x86_64 To manage notifications about this bug go to: https://bugs.launchpad.net/chromium-browser/+bug/410407/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184224] [NEW] seahorse doesn't save keyring
Public bug reported: when opening seahorse and pressing + button, selecting password-keyring for network keys and applications and saving a new keyring, the keyring just isn't saved. There's no output in the terminal. Thanks in advance for taking care about this! Ubuntu 13.04 seahorse 3.6.3 GNUPG: /usr/bin/gpg (1.4.11) ** Affects: seahorse (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to seahorse in Ubuntu. https://bugs.launchpad.net/bugs/1184224 Title: seahorse doesn't save keyring Status in “seahorse” package in Ubuntu: New Bug description: when opening seahorse and pressing + button, selecting password- keyring for network keys and applications and saving a new keyring, the keyring just isn't saved. There's no output in the terminal. Thanks in advance for taking care about this! Ubuntu 13.04 seahorse 3.6.3 GNUPG: /usr/bin/gpg (1.4.11) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/seahorse/+bug/1184224/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1070532] Re: [MS-7623, VIA VT1828S, Green Headphone Out, Front] No sound at all
Solved. Well, haven't found the cause, but, after uninstalling libasound2 (which caused uninstall of most of the system, including ubuntu-desktop and pulseaudio) and reinstalling it, now the headphones work again under pulseaudio -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1070532 Title: [MS-7623, VIA VT1828S, Green Headphone Out, Front] No sound at all Status in “pulseaudio” package in Ubuntu: Confirmed Bug description: The same PC can boot WIndows: the headphones work correctly there (even to the point that the default audio output is automatically muted when the headphones are plugged in). The headphones have an integrated microphone, which is also plugged in the (pink) front connector. The microphone works OK. There is an HDMI connector as well as the front and back jack connectors. Without adding radeon.audio=1 to the kernel boot options, the HDMI output on the same PC booted with Ubuntu does not work. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: alsa-base 1.0.25+dfsg-0ubuntu3 ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5 Uname: Linux 3.5.0-17-generic x86_64 ApportVersion: 2.6.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: fabrizio 2081 F pulseaudio /dev/snd/controlC0: fabrizio 2081 F pulseaudio /dev/snd/pcmC0D0c: fabrizio 2081 F...m pulseaudio /dev/snd/pcmC0D0p: fabrizio 2081 F...m pulseaudio Date: Tue Oct 23 22:08:19 2012 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:SB failed Symptom_Card: Audio interno - HDA ATI SB Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: fabrizio 2081 F pulseaudio /dev/snd/controlC0: fabrizio 2081 F pulseaudio /dev/snd/pcmC0D0c: fabrizio 2081 F...m pulseaudio /dev/snd/pcmC0D0p: fabrizio 2081 F...m pulseaudio Symptom_Jack: Green Headphone Out, Front Symptom_Type: No sound at all Title: [MS-7623, VIA VT1828S, Green Headphone Out, Front] No sound at all UpgradeStatus: Upgraded to quantal on 2012-10-20 (3 days ago) dmi.bios.date: 08/10/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V11.5 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 880GM-E41 (MS-7623) dmi.board.vendor: MSI dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV11.5:bd08/10/2010:svnMSI:pnMS-7623:pvr2.0:rvnMSI:rn880GM-E41(MS-7623):rvr2.0:cvnMSI:ct3:cvr2.0: dmi.product.name: MS-7623 dmi.product.version: 2.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1070532/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184228] [NEW] Evince CTRL+N command, new window, no display
Public bug reported: To reproduce in 12.04. Open a PDF to run Evince. Go to an arbitrary page with some content displayed. Select a zoom level so that something is displayed. Hit CTRL+N. A new window shows but has blank display. The workaround for now is to adjust zoom. Then PDF page is displayed. Should not need to do this, because last window displayed the content. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: evince 3.4.0-0ubuntu1.4 ProcVersionSignature: Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2 Uname: Linux 3.5.0-23-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 Date: Sat May 25 18:27:36 2013 ExecutablePath: /usr/bin/evince MarkForUpload: True ProcAttrCurrent: /usr/bin/evince (enforce) ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: evince (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apparmor apport-bug precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1184228 Title: Evince CTRL+N command, new window, no display Status in “evince” package in Ubuntu: New Bug description: To reproduce in 12.04. Open a PDF to run Evince. Go to an arbitrary page with some content displayed. Select a zoom level so that something is displayed. Hit CTRL+N. A new window shows but has blank display. The workaround for now is to adjust zoom. Then PDF page is displayed. Should not need to do this, because last window displayed the content. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: evince 3.4.0-0ubuntu1.4 ProcVersionSignature: Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2 Uname: Linux 3.5.0-23-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 Date: Sat May 25 18:27:36 2013 ExecutablePath: /usr/bin/evince MarkForUpload: True ProcAttrCurrent: /usr/bin/evince (enforce) ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1184228/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184154] Re: After last Kernel Update (3.2.0-44) system hangs on startup
On the basis that you say it's only this kernel that does it I've changed the package to the kernel package. You say it doesn't respond to anything; how about: * Does it ping from another machine on your network (if you have one) * Does ctrl-alt-f1 go to a text console (ctrl-alt-f7 or f8 to get back) ** Package changed: xorg (Ubuntu) => linux (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1184154 Title: After last Kernel Update (3.2.0-44) system hangs on startup Status in “linux” package in Ubuntu: New Bug description: My system hangs when I startup. The login screen shows up, but when I try to enter the password, after 1-3 chars the system hangs (keyboard and mouse freeze, system does not respond to anything except reset). I now started the system with the older 3.2.0-41 kernel and it works. I also attach a dmesg-file from a previous startup. The only thing I noticed myself are the odd NFSD-messages at the end, which I did not find in the newer dmesg (with patch 41 kernel). Ubuntu 12.04.2 LTS ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-41.66-generic 3.2.42 Uname: Linux 3.2.0-41-generic i686 NonfreeKernelModules: tusbd nvidia ApportVersion: 2.0.1-0ubuntu17.2 Architecture: i386 Date: Sat May 25 17:03:19 2013 InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=de_DE.ISO-8859-1 SHELL=/bin/bash SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to precise on 2012-08-24 (274 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184154/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1182007] Re: Failed to SUID root
Same here. After I upgrade my system from Ubuntu 12.10 to 13.04 (64bit) I get such a message every time I open the Online-Accounts and mark the Add Account (Konto hinzufügen... in german) entry. Maybe thats the reason why the ICQ accounts also do not work properly (you get an empty dialog). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to signon in Ubuntu. https://bugs.launchpad.net/bugs/1182007 Title: Failed to SUID root Status in “signon” package in Ubuntu: Confirmed Bug description: signond[7451]: ../../../../src/signond/signondaemon.cpp 360 init Failed to SUID root. Secure storage will not be available. This report appears in syslog each time Empathy tries and fails to connect to Google Talk using the google-talkplugin interface. It is not clear whether this SUID report is related to the Empathy failure. See bug #1168582 "Google talk "Requires Authorization" after suspend/resume" To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/signon/+bug/1182007/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 989900] Re: Various people have a bunch of unrelated problems with name resolution in Ubuntu 12.04
** Changed in: network-manager (Ubuntu) Status: Invalid => New ** Changed in: network-manager (Ubuntu) Status: New => Incomplete ** Changed in: network-manager (Ubuntu) Status: Incomplete => Opinion ** Changed in: network-manager (Ubuntu) Status: Opinion => Invalid ** Changed in: network-manager (Ubuntu) Status: Invalid => Confirmed ** Changed in: network-manager (Ubuntu) Status: Confirmed => In Progress ** Changed in: network-manager (Ubuntu) Status: In Progress => Fix Committed ** Changed in: network-manager (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/989900 Title: Various people have a bunch of unrelated problems with name resolution in Ubuntu 12.04 Status in “network-manager” package in Ubuntu: Fix Released Bug description: I just updated to Ubuntu 12.04. After the update I cannot resolve hostnames reliably: I use Konsole in Unity. There sometimes the DNS resolving works fine and suddenly after two commands or so it fails for the same address. E.g. I ping a machine without DNS-Suffix (the suffix is shown in my network config correctly aside 3 valid nameserver IPs) and everything works fine. Then I try to log into the machine with the same address via ssh and I get a "Name or service not known". Trying again, it works with a fully qualified name containing the suffix. I also had cases, when the IP wasn't resolved although I put in the fully qualified name. When I am more lucky, it starts working again with machine names only (without suffix, which is configured and worked perfectly up to now) Is there probably a bug in the new Ubuntu Version? --- ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 DistroRelease: Ubuntu 12.04 IfupdownConfig: auto lo iface lo inet loopback InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) IpRoute: default via 192.168.1.1 dev wlan0 proto static 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.2 metric 2 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true NonfreeKernelModules: nvidia Package: network-manager 0.9.4.0-0ubuntu4 PackageArchitecture: amd64 ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 3.2.0-24.38-generic 3.2.16 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: precise Uname: Linux 3.2.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin netdev plugdev sambashare sudo mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2012-05-09T05:01:02.241358 nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH Wired connection 1a76f352c-6e8c-49c7-bc05-b890445abb22 802-3-ethernet1336943434 Sun 13 May 2012 05:10:34 PM EDTyes no /org/freedesktop/NetworkManager/Settings/1 Ladner Computer Repair L.N.A 47560d22-54ec-491b-b90f-a41535d69f00 802-11-wireless 1337213171 Wed 16 May 2012 08:06:11 PM EDTyes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.4.0connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/989900/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184085] Re: Xorg server crashes when drawing dashed circles
Can you try an apport-collect 1184085 after triggering it? In the hope it will include a full set of info. (I tried triggering this on my Arch box running KDE on Intel and it doesn't trigger, so it's not as general as that) >From your logs: [ 409.670] (EE) [ 409.670] (EE) Backtrace: [ 409.671] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f3140341476] [ 409.671] (EE) 1: /usr/bin/X (0x7f3140191000+0x1b42b9) [0x7f31403452b9] [ 409.671] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f313f294000+0xfbd0) [0x7f313f2a3bd0] [ 409.671] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f313ca33000+0x412ae) [0x7f313ca742ae] [ 409.671] (EE) 4: /usr/bin/X (0x7f3140191000+0x1a356d) [0x7f314033456d] [ 409.671] (EE) 5: /usr/bin/X (0x7f3140191000+0x1a5b81) [0x7f3140336b81] [ 409.671] (EE) 6: /usr/bin/X (miWideDash+0x1564) [0x7f31403388d4] [ 409.671] (EE) 7: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f313ca33000+0x5f105) [0x7f313ca92105] [ 409.671] (EE) 8: /usr/bin/X (0x7f3140191000+0x13c33c) [0x7f31402cd33c] [ 409.671] (EE) 9: /usr/bin/X (0x7f3140191000+0x54ebc) [0x7f31401e5ebc] [ 409.671] (EE) 10: /usr/bin/X (0x7f3140191000+0x58ac1) [0x7f31401e9ac1] [ 409.671] (EE) 11: /usr/bin/X (0x7f3140191000+0x4757a) [0x7f31401d857a] [ 409.671] (EE) 12: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7f313dee1ea5] [ 409.671] (EE) 13: /usr/bin/X (0x7f3140191000+0x478c1) [0x7f31401d88c1] [ 409.671] (EE) [ 409.671] (EE) Segmentation fault at address 0x0 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1184085 Title: Xorg server crashes when drawing dashed circles Status in “xorg-server” package in Ubuntu: Confirmed Bug description: To reproduce: install xfig (sudo apt-get install xfig) open xfig --- then try to draw a circle with dashed line (choose the circle, select the dash line in the row below the main screen, click in the canvas to draw). The Xorg ser4ver crashes and You are back to login. The first time it happened apport created a report, but then did not open the browser to submit it --- so I am sending this by hand; will attach the report if I can (it's 12M compressed). I am attaching a version without core dump, ask me if you need the full one. It could be related to bad rendering of filled area: https://bugs.launchpad.net/bugs/1177535 Or maybe a regression: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/553647 All the data in the attached file; nevertheless, this is a -intel driver. Ubuntu 13.04 with gnome-shell. Thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184085/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp