[Desktop-packages] [Bug 2047989] [NEW] Sticky Keys accessibility feature ctrl-shift behaves differently from ctrl-alt; ctrl-shift causes both to get stuck on
Public bug reported: (Sticky Keys is an accessibility feature. Settings->Typing Assist (AccessX)->Sticky Keys. Sticky Keys is not just for the disabled! Sticky Keys is a feature that helps prevent or attenuate repetitive stress injuries (RSI) by helping the user avoid problematic "deviations" of the hand/wrist/fingers. I use Sticky Keys to prevent RSI. I don't always use Sticky Keys as intended -- sometimes I press and release modifier keys as intended, sometimes I hold them down, and this is really a matter of training, but also that combinations which do not hurt are combinations I'm willing to hold rather than press and release.) With `Disable if two keys are pressed together` disabled, the way sticky keys is supposed to work is that I should be able to hit and hold one or more modifier keys and then some non-modifier key, and it should work as if sticky keys were disabled (assuming none of the modifier keys had been hit and released just before)[*], however when the two modifier keys are ctrl and shift (or maybe just when one of them is shift?) the modifier keys are then stuck on, as if each of them had been pressed and released twice. This does not happen when using, say, ctrl and alt. I've not checked all modifier key combinations, so do please check for others. Note that I can't tell what package delivers Sticky Keys, therefore I might be opening this bug under the incorrect package. It might be gnome-desktop, or who knows what. It's not always easy for users to tell. [*] This is technically a misuse of sticky keys, but the reason `Disable if two keys are pressed together` is configurable is that sticky keys is a feature one need not use correctly all the time! ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubuntu-desktop 1.481.1 ProcVersionSignature: Ubuntu 6.1.0-1027.27-oem 6.1.61 Uname: Linux 6.1.0-1027-oem x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Jan 3 19:59:39 2024 SourcePackage: ubuntu-meta UpgradeStatus: No upgrade log present (probably fresh install) modified.conffile..etc.logrotate.d.apport: [modified] mtime.conffile..etc.logrotate.d.apport: 2023-11-28T00:59:18.000120 ** Affects: ubuntu-meta (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy wayland-session -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/2047989 Title: Sticky Keys accessibility feature ctrl-shift behaves differently from ctrl-alt; ctrl-shift causes both to get stuck on Status in ubuntu-meta package in Ubuntu: New Bug description: (Sticky Keys is an accessibility feature. Settings->Typing Assist (AccessX)->Sticky Keys. Sticky Keys is not just for the disabled! Sticky Keys is a feature that helps prevent or attenuate repetitive stress injuries (RSI) by helping the user avoid problematic "deviations" of the hand/wrist/fingers. I use Sticky Keys to prevent RSI. I don't always use Sticky Keys as intended -- sometimes I press and release modifier keys as intended, sometimes I hold them down, and this is really a matter of training, but also that combinations which do not hurt are combinations I'm willing to hold rather than press and release.) With `Disable if two keys are pressed together` disabled, the way sticky keys is supposed to work is that I should be able to hit and hold one or more modifier keys and then some non-modifier key, and it should work as if sticky keys were disabled (assuming none of the modifier keys had been hit and released just before)[*], however when the two modifier keys are ctrl and shift (or maybe just when one of them is shift?) the modifier keys are then stuck on, as if each of them had been pressed and released twice. This does not happen when using, say, ctrl and alt. I've not checked all modifier key combinations, so do please check for others. Note that I can't tell what package delivers Sticky Keys, therefore I might be opening this bug under the incorrect package. It might be gnome-desktop, or who knows what. It's not always easy for users to tell. [*] This is technically a misuse of sticky keys, but the reason `Disable if two keys are pressed together` is configurable is that sticky keys is a feature one need not use correctly all the time! ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: ubuntu-desktop 1.481.1 ProcVersionSignature: Ubuntu 6.1.0-1027.27-oem 6.1.61 Uname: Linux 6.1.0-1027-oem x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Wed Jan 3 19:59:39 2024 SourcePackage: ubuntu-meta UpgradeStatus: No upgrade log present (pr
[Desktop-packages] [Bug 1767542] Re: Turning off WiFi enables Airplane mode
This bug has quite a big impact but seems to be easy to fix. By this means 4 years is a looong time. 20.04 LTS, 21.04, 21.10 still have this issue - will 22.04 too? Seriously, when will this be fixed? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1767542 Title: Turning off WiFi enables Airplane mode Status in gnome-control-center: Confirmed Status in gnome-control-center package in Ubuntu: Triaged Bug description: Turning off the WiFi from the top right control enables Airplane mode (see screenshots). Also after turning off airplane mode, the Wi-Fi is not turned back on, rather the Bluetooth is. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gnome-control-center 1:3.28.1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Apr 27 17:46:34 2018 InstallationDate: Installed on 2018-04-27 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-control-center/+bug/1767542/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1767542] Re: Turning off WiFi enables Airplane mode
Issue persists on 20.04 on the same Lenovo L480/490/14 Series. Turning Wifi off still turns airplane mode on. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1767542 Title: Turning off WiFi enables Airplane mode Status in gnome-control-center: Confirmed Status in gnome-control-center package in Ubuntu: Triaged Bug description: Turning off the WiFi from the top right control enables Airplane mode (see screenshots). Also after turning off airplane mode, the Wi-Fi is not turned back on, rather the Bluetooth is. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gnome-control-center 1:3.28.1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Apr 27 17:46:34 2018 InstallationDate: Installed on 2018-04-27 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-control-center/+bug/1767542/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1909857] Re: NUC7i5 - No HBR, unstable EAC3 audio passthrough on Ubuntu 20.10
Erm... No bite? Not the right place? Missing bits of info? No interest? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1909857 Title: NUC7i5 - No HBR, unstable EAC3 audio passthrough on Ubuntu 20.10 Status in alsa-driver package in Ubuntu: New Bug description: Software is X11-based stable/up-to-date Kodi v18 on up-to-date Ubuntu 20.10. Hardware is an Intel NUC7i5BNH (Kaby Lake), latest available BIOS and latest available HDMI/LS-PCON firmware. The AVR is a Denon AVR-2310. The TV is an old Toshiba 1080p LCD. I make sure that the TV and AVR are turned on first so that EDID is available. When playing a file with HBR audio bitstreams (DTS-HD, Dolby TrueHD) I get no audio. When playing a file with EAC3/DD+ audio bitstreams, I get very regular dropouts. When I play a file with stereo/DTS/DD bitstreams, all is fine. When I play an audio file with 6 channels of LPCM, all is fine. I can play the same files with HBR or EAC3 audio on the same machine from a Windows install without any issue, right out of the box using the built-in software, using the default configs, which rules out hardware incompatibilities. I've spent some time with the Kodi guys who have come to the conclusion that the issue was not with them but higher in the software stack. So here I am! History here: https://forum.kodi.tv/showthread.php?tid=359371 I've also filed a bug with Intel, but I'm not getting any traction there. Must be the holydays! https://gitlab.freedesktop.org/drm/intel/-/issues/2861 Any help is welcomed. I'm no dev, but I know my way around Linux and systems, and I am not afraid of testing things and reporting data. Compiling code is usually something I can do, with instructions if it's less run-of-the-mill. Thanks in advance! More specific/detailed background data: BIOS: BNKBL357.86A.0083.2020.0714.1344 07/14/2020 (latest available from Intel) HDMI Firmware: 1.77.93 (the latest available from Intel, updated from a Windows install) System architecture: ("uname -m"): x86_64 Kernel version: ("uname -r"): 5.8.0-33-generic Linux distribution: Ubuntu 20.10 kept up-to-date Machine or motherboard model (use dmidecode if needed): NUC7i5BNH - https://paste.ubuntu.com/p/J2V4mKFWSg/ Display connector: physically HDMI, but I understand that it is internally a DP with a protocol converter leading to HDMI Full dmesg with debug information: From boot https://paste.ubuntu.com/p/53qVzpDJ76/ I've played a file with DTS-HD HBR audio bitstream (no audio) towards the end, if it can help - https://paste.ubuntu.com/p/5pRRpmfT3P/ I've played a file with EAC3 audio bitstream with dropouts towards the end of that one, if it can help - https://paste.ubuntu.com/p/xFPQY5Zzcb/ xrandr --verbose: https://paste.ubuntu.com/p/V95ZWx9MNy/ intel_reg_dumper output: https://paste.ubuntu.com/p/bWnjsvQ9t4/ VBIOS dump: File available there https://youplala.net/~nico/intel/ lsmod | grep snd: https://paste.ubuntu.com/p/hq9Bf87GbY/ /proc/asound/card0/codec#2: https://paste.ubuntu.com/p/8JDwbj5pYs/ /proc/asound/card0/eld#2.0: https://paste.ubuntu.com/p/KdZzHZxTsm/ cat /sys/devices/pci:00/:00:02.0/drm/card0/card0-DP-1/edid | edid-decode: https://paste.ubuntu.com/p/vVjdSWh9Dz/ ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: alsa-base (not installed) ProcVersionSignature: Ubuntu 5.8.0-33.36-generic 5.8.17 Uname: Linux 5.8.0-33-generic x86_64 ApportVersion: 2.20.11-0ubuntu50.3 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Jan 2 12:59:50 2021 InstallationDate: Installed on 2018-02-01 (1066 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 (20180108.1) ProcEnviron: LANGUAGE=en_GB:en TERM=screen-256color PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio UpgradeStatus: Upgraded to groovy on 2020-12-26 (7 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1909857/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1909857] Re: NUC7i5 - No HBR, unstable EAC3 audio passthrough on Ubuntu 20.10
Also, alsa-info.sh: https://paste.ubuntu.com/p/sspkGCwkVj/ -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1909857 Title: NUC7i5 - No HBR, unstable EAC3 audio passthrough on Ubuntu 20.10 Status in alsa-driver package in Ubuntu: New Bug description: Software is X11-based stable/up-to-date Kodi v18 on up-to-date Ubuntu 20.10. Hardware is an Intel NUC7i5BNH (Kaby Lake), latest available BIOS and latest available HDMI/LS-PCON firmware. The AVR is a Denon AVR-2310. The TV is an old Toshiba 1080p LCD. I make sure that the TV and AVR are turned on first so that EDID is available. When playing a file with HBR audio bitstreams (DTS-HD, Dolby TrueHD) I get no audio. When playing a file with EAC3/DD+ audio bitstreams, I get very regular dropouts. When I play a file with stereo/DTS/DD bitstreams, all is fine. When I play an audio file with 6 channels of LPCM, all is fine. I can play the same files with HBR or EAC3 audio on the same machine from a Windows install without any issue, right out of the box using the built-in software, using the default configs, which rules out hardware incompatibilities. I've spent some time with the Kodi guys who have come to the conclusion that the issue was not with them but higher in the software stack. So here I am! History here: https://forum.kodi.tv/showthread.php?tid=359371 I've also filed a bug with Intel, but I'm not getting any traction there. Must be the holydays! https://gitlab.freedesktop.org/drm/intel/-/issues/2861 Any help is welcomed. I'm no dev, but I know my way around Linux and systems, and I am not afraid of testing things and reporting data. Compiling code is usually something I can do, with instructions if it's less run-of-the-mill. Thanks in advance! More specific/detailed background data: BIOS: BNKBL357.86A.0083.2020.0714.1344 07/14/2020 (latest available from Intel) HDMI Firmware: 1.77.93 (the latest available from Intel, updated from a Windows install) System architecture: ("uname -m"): x86_64 Kernel version: ("uname -r"): 5.8.0-33-generic Linux distribution: Ubuntu 20.10 kept up-to-date Machine or motherboard model (use dmidecode if needed): NUC7i5BNH - https://paste.ubuntu.com/p/J2V4mKFWSg/ Display connector: physically HDMI, but I understand that it is internally a DP with a protocol converter leading to HDMI Full dmesg with debug information: From boot https://paste.ubuntu.com/p/53qVzpDJ76/ I've played a file with DTS-HD HBR audio bitstream (no audio) towards the end, if it can help - https://paste.ubuntu.com/p/5pRRpmfT3P/ I've played a file with EAC3 audio bitstream with dropouts towards the end of that one, if it can help - https://paste.ubuntu.com/p/xFPQY5Zzcb/ xrandr --verbose: https://paste.ubuntu.com/p/V95ZWx9MNy/ intel_reg_dumper output: https://paste.ubuntu.com/p/bWnjsvQ9t4/ VBIOS dump: File available there https://youplala.net/~nico/intel/ lsmod | grep snd: https://paste.ubuntu.com/p/hq9Bf87GbY/ /proc/asound/card0/codec#2: https://paste.ubuntu.com/p/8JDwbj5pYs/ /proc/asound/card0/eld#2.0: https://paste.ubuntu.com/p/KdZzHZxTsm/ cat /sys/devices/pci:00/:00:02.0/drm/card0/card0-DP-1/edid | edid-decode: https://paste.ubuntu.com/p/vVjdSWh9Dz/ ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: alsa-base (not installed) ProcVersionSignature: Ubuntu 5.8.0-33.36-generic 5.8.17 Uname: Linux 5.8.0-33-generic x86_64 ApportVersion: 2.20.11-0ubuntu50.3 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Jan 2 12:59:50 2021 InstallationDate: Installed on 2018-02-01 (1066 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 (20180108.1) ProcEnviron: LANGUAGE=en_GB:en TERM=screen-256color PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio UpgradeStatus: Upgraded to groovy on 2020-12-26 (7 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1909857/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1909857] [NEW] NUC7i5 - No HBR, unstable EAC3 audio passthrough on Ubuntu 20.10
Public bug reported: Software is X11-based stable/up-to-date Kodi v18 on up-to-date Ubuntu 20.10. Hardware is an Intel NUC7i5BNH (Kaby Lake), latest available BIOS and latest available HDMI/LS-PCON firmware. The AVR is a Denon AVR-2310. The TV is an old Toshiba 1080p LCD. I make sure that the TV and AVR are turned on first so that EDID is available. When playing a file with HBR audio bitstreams (DTS-HD, Dolby TrueHD) I get no audio. When playing a file with EAC3/DD+ audio bitstreams, I get very regular dropouts. When I play a file with stereo/DTS/DD bitstreams, all is fine. When I play an audio file with 6 channels of LPCM, all is fine. I can play the same files with HBR or EAC3 audio on the same machine from a Windows install without any issue, right out of the box using the built-in software, using the default configs, which rules out hardware incompatibilities. I've spent some time with the Kodi guys who have come to the conclusion that the issue was not with them but higher in the software stack. So here I am! History here: https://forum.kodi.tv/showthread.php?tid=359371 I've also filed a bug with Intel, but I'm not getting any traction there. Must be the holydays! https://gitlab.freedesktop.org/drm/intel/-/issues/2861 Any help is welcomed. I'm no dev, but I know my way around Linux and systems, and I am not afraid of testing things and reporting data. Compiling code is usually something I can do, with instructions if it's less run-of-the-mill. Thanks in advance! More specific/detailed background data: BIOS: BNKBL357.86A.0083.2020.0714.1344 07/14/2020 (latest available from Intel) HDMI Firmware: 1.77.93 (the latest available from Intel, updated from a Windows install) System architecture: ("uname -m"): x86_64 Kernel version: ("uname -r"): 5.8.0-33-generic Linux distribution: Ubuntu 20.10 kept up-to-date Machine or motherboard model (use dmidecode if needed): NUC7i5BNH - https://paste.ubuntu.com/p/J2V4mKFWSg/ Display connector: physically HDMI, but I understand that it is internally a DP with a protocol converter leading to HDMI Full dmesg with debug information: From boot https://paste.ubuntu.com/p/53qVzpDJ76/ I've played a file with DTS-HD HBR audio bitstream (no audio) towards the end, if it can help - https://paste.ubuntu.com/p/5pRRpmfT3P/ I've played a file with EAC3 audio bitstream with dropouts towards the end of that one, if it can help - https://paste.ubuntu.com/p/xFPQY5Zzcb/ xrandr --verbose: https://paste.ubuntu.com/p/V95ZWx9MNy/ intel_reg_dumper output: https://paste.ubuntu.com/p/bWnjsvQ9t4/ VBIOS dump: File available there https://youplala.net/~nico/intel/ lsmod | grep snd: https://paste.ubuntu.com/p/hq9Bf87GbY/ /proc/asound/card0/codec#2: https://paste.ubuntu.com/p/8JDwbj5pYs/ /proc/asound/card0/eld#2.0: https://paste.ubuntu.com/p/KdZzHZxTsm/ cat /sys/devices/pci:00/:00:02.0/drm/card0/card0-DP-1/edid | edid-decode: https://paste.ubuntu.com/p/vVjdSWh9Dz/ ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: alsa-base (not installed) ProcVersionSignature: Ubuntu 5.8.0-33.36-generic 5.8.17 Uname: Linux 5.8.0-33-generic x86_64 ApportVersion: 2.20.11-0ubuntu50.3 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Jan 2 12:59:50 2021 InstallationDate: Installed on 2018-02-01 (1066 days ago) InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 (20180108.1) ProcEnviron: LANGUAGE=en_GB:en TERM=screen-256color PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio UpgradeStatus: Upgraded to groovy on 2020-12-26 (7 days ago) ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug groovy -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1909857 Title: NUC7i5 - No HBR, unstable EAC3 audio passthrough on Ubuntu 20.10 Status in alsa-driver package in Ubuntu: New Bug description: Software is X11-based stable/up-to-date Kodi v18 on up-to-date Ubuntu 20.10. Hardware is an Intel NUC7i5BNH (Kaby Lake), latest available BIOS and latest available HDMI/LS-PCON firmware. The AVR is a Denon AVR-2310. The TV is an old Toshiba 1080p LCD. I make sure that the TV and AVR are turned on first so that EDID is available. When playing a file with HBR audio bitstreams (DTS-HD, Dolby TrueHD) I get no audio. When playing a file with EAC3/DD+ audio bitstreams, I get very regular dropouts. When I play a file with stereo/DTS/DD bitstreams, all is fine. When I play an audio file with 6 channels of LPCM, all is fine. I can play the same files with HBR or EAC3 audio on the same machine from a Windows install without any issue, right out of the box using the built-in software, using the default configs, which rules out hardware incompatibilities. I've spent
[Desktop-packages] [Bug 1866348] Re: gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000]
Something very similar is reported at https://bugzilla.redhat.com/show_bug.cgi?id=1797736. Downgrading fixed the problem there, but I can't see how to downgrade glib-2.0 on focal -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1866348 Title: gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000] Status in glib2.0 package in Ubuntu: New Bug description: I'm running on Focal. Since recently, Gnome crashes with ``` Mar 6 14:03:16 ishanca gnome-shell[77303]: Failed to set scheduler settings: Operation not permitted Mar 6 14:03:16 ishanca kernel: [33974.584854] traps: gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000] [...] ``` To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1866348/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1866348] [NEW] gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000]
Public bug reported: I'm running on Focal. Since recently, Gnome crashes with ``` Mar 6 14:03:16 ishanca gnome-shell[77303]: Failed to set scheduler settings: Operation not permitted Mar 6 14:03:16 ishanca kernel: [33974.584854] traps: gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000] [...] ``` ** Affects: glib2.0 (Ubuntu) Importance: Undecided Status: New ** Bug watch added: Red Hat Bugzilla #1797736 https://bugzilla.redhat.com/show_bug.cgi?id=1797736 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1866348 Title: gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000] Status in glib2.0 package in Ubuntu: New Bug description: I'm running on Focal. Since recently, Gnome crashes with ``` Mar 6 14:03:16 ishanca gnome-shell[77303]: Failed to set scheduler settings: Operation not permitted Mar 6 14:03:16 ishanca kernel: [33974.584854] traps: gnome-shell[81291] trap int3 ip:7fc2d73a5065 sp:7fc284e6d710 error:0 in libglib-2.0.so.0.6305.0[7fc2d7369000+84000] [...] ``` To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1866348/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1767542] Re: Turning off WiFi enables Airplane mode
In Ubuntu 18.04 LTS this is still an issue, the described behaviour still occurs exactly as described. Probably this is expected with your smartphone but absolutely not from your Laptop! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1767542 Title: Turning off WiFi enables Airplane mode Status in gnome-control-center: Confirmed Status in gnome-control-center package in Ubuntu: Triaged Bug description: Turning off the WiFi from the top right control enables Airplane mode (see screenshots). Also after turning off airplane mode, the Wi-Fi is not turned back on, rather the Bluetooth is. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gnome-control-center 1:3.28.1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Apr 27 17:46:34 2018 InstallationDate: Installed on 2018-04-27 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-control-center/+bug/1767542/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1850001] Re: nautilus hangs on file delete
Alright, to confirm, installing the org.gnome.NautilusDevel and running it has given me a working system again. In case somebody is looking for a way to get a working system until 20.04 lands. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1850001 Title: nautilus hangs on file delete Status in nautilus package in Ubuntu: New Bug description: Nautilus hangs when deleting a file. The file does not get deleted. This applies to the DELETE key, the SHIFT+DELETE keys, and the RIGHT- CLICK attempt at deleting. This is reproducible in this boot session. This has never happened since the install of the OS. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: nautilus 1:3.34.1-1ubuntu1 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu8 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Oct 26 18:12:36 2019 ExecutablePath: /usr/bin/nautilus GsettingsChanges: InstallationDate: Installed on 2019-10-20 (6 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191014) ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, no user) LANG=en_US.UTF-8 SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_nautilus: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1850001/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1850001] Re: nautilus hangs on file delete
I too have this issue. I just upgraded from 18.04 LTS to 19.10 and Nautilus starts fine, finishes the check, but I cannot initiate any file commands like copy, move or delete. Nautilus doesn't respond and GNOME serves the pop-up to kill Nautilus. Pressing the 'waiting' option repeatedly doesn't solve it. Running it from the commandline, I see some widget errors when trying to execute a command: $ nautilus G (org.gnome.Nautilus:23240): Gtk-CRITICAL **: 21:55:52.377: gtk_widget_get_mapped: assertion 'GTK_IS_WIDGET (widget)' failed (org.gnome.Nautilus:23240): Gdk-CRITICAL **: 21:55:52.377: gdk_window_is_visible: assertion 'GDK_IS_WINDOW (window)' failed (org.gnome.Nautilus:23240): Gdk-CRITICAL **: 21:55:52.377: gdk_window_show_internal: assertion 'GDK_IS_WINDOW (window)' failed (org.gnome.Nautilus:23240): Gtk-CRITICAL **: 21:55:52.377: gtk_widget_set_opacity: assertion 'GTK_IS_WIDGET (widget)' failed (org.gnome.Nautilus:23240): Gtk-CRITICAL **: 21:55:52.377: gtk_widget_queue_draw: assertion 'GTK_IS_WIDGET (widget)' failed (org.gnome.Nautilus:23240): Gtk-CRITICAL **: 21:55:54.380: gtk_widget_get_mapped: assertion 'GTK_IS_WIDGET (widget)' failed (org.gnome.Nautilus:23240): Gdk-CRITICAL **: 21:55:54.380: gdk_window_is_visible: assertion 'GDK_IS_WINDOW (window)' failed (org.gnome.Nautilus:23240): Gtk-CRITICAL **: 21:55:54.380: gtk_widget_set_opacity: assertion 'GTK_IS_WIDGET (widget)' failed (org.gnome.Nautilus:23240): Gtk-CRITICAL **: 21:55:54.380: gtk_widget_queue_draw: assertion 'GTK_IS_WIDGET (widget)' failed It seems this bug has been reported upstream too, but is ignored as the version is too old https://gitlab.gnome.org/GNOME/nautilus/issues/1218 I cannot find an easy answer in the logs that points to a specific problem. I can successfully do the file operations from the command line using mv, cp and rm, so it is no permission issue. I'm now in the process of installing Nautilus from Flathub gnome- nightly, hopefully that will give me back a working system. Because even though I did a nice upgrade using `sudo do-release-upgrade` it feels like I have a broken system now. Is there a way I can get more debugging from Nautilus? ** Bug watch added: gitlab.gnome.org/GNOME/nautilus/issues #1218 https://gitlab.gnome.org/GNOME/nautilus/issues/1218 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1850001 Title: nautilus hangs on file delete Status in nautilus package in Ubuntu: New Bug description: Nautilus hangs when deleting a file. The file does not get deleted. This applies to the DELETE key, the SHIFT+DELETE keys, and the RIGHT- CLICK attempt at deleting. This is reproducible in this boot session. This has never happened since the install of the OS. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: nautilus 1:3.34.1-1ubuntu1 ProcVersionSignature: Ubuntu 5.3.0-19.20-generic 5.3.1 Uname: Linux 5.3.0-19-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu8 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Sat Oct 26 18:12:36 2019 ExecutablePath: /usr/bin/nautilus GsettingsChanges: InstallationDate: Installed on 2019-10-20 (6 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191014) ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, no user) LANG=en_US.UTF-8 SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_nautilus: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1850001/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1858092] Re: Network Manager not saving OpenVPN password
Can confirm that, after updating from the official repositories (Kubuntu 19.10), saving passwords "for this user only" works as intended again. Thanks! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1858092 Title: Network Manager not saving OpenVPN password Status in NetworkManager: Fix Released Status in network-manager package in Ubuntu: Fix Released Status in network-manager source package in Eoan: Fix Released Status in network-manager source package in Focal: Fix Released Bug description: [impact] network-manager no longer correctly saves VPN passwords [test case] on a 19.10 (or later) system, configure a VPN with network-manager and provide a password that it should save. On next connection, it will prompt for a password again. [regression potential] as this adjusts how n-m handles connections with secrets/passwords, any regression would likely cause secrets to fail to be stored for later use, and/or failure to correctly use the secrets at all to setup the connection. [scope] This is needed only in eoan. The patch: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/commit/cf557bf06f344bdbcd775dce35daa42335c645d7 is included in the 1.20.6 release: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/230#note_283402 focal-proposed currently has version 1.20.8, so this patch is already included in focal. This bug was introduced after version 1.18.2: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/230#note_235976 disco-updates has version 1.60.0, so this patch is not needed in disco or earlier. [other info] original description: --- Hi everyone, After upgrading to kubuntu 19.10 I can't save the VPN password using Store password for this user only. It seems the integration with the kwallet is failing somehow... The system logs seem to show that everything went ok, but the password is not saved: jan 02 11:40:40 NetworkManager[5530]: [1577965240.2166] audit: op="connection-update" uuid="4c05-911a-1d9161f05a19" name="ovpn" args="vpn.secrets" pid=14142 uid=1000 result="success" This also happens with a clean install. Operating System: Kubuntu 19.10 KDE Plasma Version: 5.16.5 KDE Frameworks Version: 5.62.0 Qt Version: 5.12.4 Kernel Version: 5.3.0-24-generic OS Type: 64-bit To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1858092/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1858092] Re: Network Manager not saving OpenVPN password
Is there an estimation when this will go from proposed to release? I'm working around it by looking up the connections' UID in the Network- Manager configuration and manually adding the corresponding entries in KWallet as of now.. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1858092 Title: Network Manager not saving OpenVPN password Status in NetworkManager: Fix Released Status in network-manager package in Ubuntu: Fix Released Status in network-manager source package in Eoan: Fix Committed Status in network-manager source package in Focal: Fix Released Bug description: [impact] network-manager no longer correctly saves VPN passwords [test case] on a 19.10 (or later) system, configure a VPN with network-manager and provide a password that it should save. On next connection, it will prompt for a password again. [regression potential] as this adjusts how n-m handles connections with secrets/passwords, any regression would likely cause secrets to fail to be stored for later use, and/or failure to correctly use the secrets at all to setup the connection. [scope] This is needed only in eoan. The patch: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/commit/cf557bf06f344bdbcd775dce35daa42335c645d7 is included in the 1.20.6 release: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/230#note_283402 focal-proposed currently has version 1.20.8, so this patch is already included in focal. This bug was introduced after version 1.18.2: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues/230#note_235976 disco-updates has version 1.60.0, so this patch is not needed in disco or earlier. [other info] original description: --- Hi everyone, After upgrading to kubuntu 19.10 I can't save the VPN password using Store password for this user only. It seems the integration with the kwallet is failing somehow... The system logs seem to show that everything went ok, but the password is not saved: jan 02 11:40:40 NetworkManager[5530]: [1577965240.2166] audit: op="connection-update" uuid="4c05-911a-1d9161f05a19" name="ovpn" args="vpn.secrets" pid=14142 uid=1000 result="success" This also happens with a clean install. Operating System: Kubuntu 19.10 KDE Plasma Version: 5.16.5 KDE Frameworks Version: 5.62.0 Qt Version: 5.12.4 Kernel Version: 5.3.0-24-generic OS Type: 64-bit To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1858092/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1764417] Re: Unrecoverable failure in required component org.gnome.SettingsDaemon.Color.desktop
Same bug ('org.gnome.SettingsDaemon.Color.desktop' failed to register) for me, but no NVIDIA card involved : VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) I'm using Ubuntu 18.04.3, and it happens randomly, but only since a few weeks... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1764417 Title: Unrecoverable failure in required component org.gnome.SettingsDaemon.Color.desktop Status in gnome-settings-daemon package in Ubuntu: Confirmed Bug description: I've had this happen a couple of times now since upgrading to 18.04: soon (perhaps within a minute) after logging in, Gnome session ends abruptly and I'm thrown back to the login screen. IIRC, in both instances this occurred on the first login after boot, so it does not reoccur on the subsequent re-login, and not on every login (very rarely in fact), and for now I have no better steps to reproduce this other than "boot, log in". Bug #1663839 (reported against 17.04) seems similar, as does bug #1731428 (reported against 17.10). journalctl output during the issue: Apr 16 07:00:30 saegusa gnome-session[4342]: gnome-session-binary[4342]: WARNING: Application 'org.gnome.SettingsDaemon.Color.desktop' failed to register before timeout Apr 16 07:00:30 saegusa gnome-session-binary[4342]: WARNING: Application 'org.gnome.SettingsDaemon.Color.desktop' failed to register before timeout Apr 16 07:00:30 saegusa gnome-session-binary[4342]: Unrecoverable failure in required component org.gnome.SettingsDaemon.Color.desktop Apr 16 07:00:30 saegusa gnome-session[4342]: gnome-session-binary[4342]: CRITICAL: We failed, but the fail whale is dead. Sorry Apr 16 07:00:30 saegusa gnome-session-binary[4342]: CRITICAL: We failed, but the fail whale is dead. Sorry ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: gnome-settings-daemon 3.28.1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-15.16-generic 4.15.15 Uname: Linux 4.15.0-15-generic x86_64 ApportVersion: 2.20.9-0ubuntu4 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Apr 16 17:07:14 2018 InstallationDate: Installed on 2016-10-13 (550 days ago) InstallationMedia: Ubuntu-Server 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fi_FI.UTF-8 SHELL=/bin/bash SourcePackage: gnome-settings-daemon UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1764417/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1823516] Re: Nvidia driver installed but X apps are using software rendering (LLVMpipe) in Wayland sessions
Is there any update on this? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1823516 Title: Nvidia driver installed but X apps are using software rendering (LLVMpipe) in Wayland sessions Status in mesa package in Ubuntu: Invalid Status in mutter package in Ubuntu: Invalid Status in nvidia-graphics-drivers-418 package in Ubuntu: Invalid Status in xorg-server package in Ubuntu: Triaged Bug description: Nvidia driver installed but X apps are using software rendering (LLVMpipe) in Wayland sessions. I am using kernel parameter nvidia-drm.modeset=1, which is required to get the "Ubuntu on Wayland" option. But after logging in I see: $ glxinfo | grep OpenGL OpenGL vendor string: VMware, Inc. OpenGL renderer string: llvmpipe (LLVM 8.0, 256 bits) OpenGL core profile version string: 3.3 (Core Profile) Mesa 19.0.1 OpenGL core profile shading language version string: 3.30 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile OpenGL core profile extensions: OpenGL version string: 3.1 Mesa 19.0.1 OpenGL shading language version string: 1.40 OpenGL context flags: (none) OpenGL extensions: OpenGL ES profile version string: OpenGL ES 3.0 Mesa 19.0.1 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00 OpenGL ES profile extensions: $ es2_info | grep ^GL GL_VERSION: OpenGL ES 3.0 Mesa 19.0.1 GL_RENDERER: llvmpipe (LLVM 8.0, 256 bits) ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: nvidia-driver-418 418.56-0ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.10-0ubuntu25 Architecture: amd64 Date: Sun Apr 7 17:26:07 2019 InstallationDate: Installed on 2018-12-04 (124 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20181203) SourcePackage: nvidia-graphics-drivers-418 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1823516/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825497] Re: flash player does not work in chromium
i've only installed the package adobe-flashplugin (it worked in both browsers until 20th april, now only works on firefox) from the canonical software repo. google-chrome (not chromium) it's supposed to have integrated flash, but it didn't work either. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1825497 Title: flash player does not work in chromium Status in chromium-browser package in Ubuntu: Confirmed Status in firefox package in Ubuntu: Invalid Bug description: after you allow it to run it doesn't. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: chromium-browser 73.0.3683.103-0ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 DRM.card0-DP-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-HDMI-A-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAEcqMAdkcABTIUAQOANR146mCFplZKnCUSUFSzDABxT4EAlQDRwIGAAQEBAQEBAjqAGHE4LUBYLEUAEyohAAAa/ABWMjQzSAogICAgICAg/QA4TB9TEgAKICAgICAg/wBMRlYwQzAyMTQwRjEKAPU= modes: 1920x1080 1280x1024 1440x900 1280x800 1152x864 1024x768 1024x768 800x600 800x600 640x480 640x480 720x400 DRM.card0-HDMI-A-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: Date: Fri Apr 19 04:29:19 2019 Desktop-Session: 'ubuntu' '/etc/xdg/xdg-ubuntu:/etc/xdg' '/usr/share/ubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop:/var/lib/snapd/desktop' DetectedPlugins: Env: 'None' 'None' ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2017-04-20 (729 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Load-Avg-1min: 1.18 Load-Processes-Running-Percent: 0.4% Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 04ca:0050 Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: System manufacturer System Product Name ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=71d156ea-3173-43e9-9a5e-00edcd2137f2 ro splash quiet vt.handoff=1 SourcePackage: chromium-browser UpgradeStatus: Upgraded to disco on 2019-04-19 (0 days ago) dmi.bios.date: 02/28/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4202 dmi.board.asset.tag: Default string dmi.board.name: H110M-A/M.2 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4202:bd02/28/2019:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH110M-A/M.2:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer etcconfigcpepperflashpluginnonfree: flashso="/usr/lib/pepperflashplugin-nonfree/libpepflashplayer.so" flashversion=`strings $flashso 2> /dev/null | grep LNX | cut -d ' ' -f 2 | sed -e "s/,/./g"` CHROMIUM_FLAGS="$CHROMIUM_FLAGS --ppapi-flash-path=$flashso --ppapi-flash-version=$flashversion" modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1825497/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825497] Re: flash player does not work in firefox or chromium
https://bbs.archlinux.org/viewtopic.php?id=245855 can be this?? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1825497 Title: flash player does not work in firefox or chromium Status in chromium-browser package in Ubuntu: Confirmed Status in firefox package in Ubuntu: Confirmed Bug description: after you allow it to run it doesn't. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: chromium-browser 73.0.3683.103-0ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 DRM.card0-DP-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-HDMI-A-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAEcqMAdkcABTIUAQOANR146mCFplZKnCUSUFSzDABxT4EAlQDRwIGAAQEBAQEBAjqAGHE4LUBYLEUAEyohAAAa/ABWMjQzSAogICAgICAg/QA4TB9TEgAKICAgICAg/wBMRlYwQzAyMTQwRjEKAPU= modes: 1920x1080 1280x1024 1440x900 1280x800 1152x864 1024x768 1024x768 800x600 800x600 640x480 640x480 720x400 DRM.card0-HDMI-A-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: Date: Fri Apr 19 04:29:19 2019 Desktop-Session: 'ubuntu' '/etc/xdg/xdg-ubuntu:/etc/xdg' '/usr/share/ubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop:/var/lib/snapd/desktop' DetectedPlugins: Env: 'None' 'None' ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2017-04-20 (729 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Load-Avg-1min: 1.18 Load-Processes-Running-Percent: 0.4% Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 04ca:0050 Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: System manufacturer System Product Name ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=71d156ea-3173-43e9-9a5e-00edcd2137f2 ro splash quiet vt.handoff=1 SourcePackage: chromium-browser UpgradeStatus: Upgraded to disco on 2019-04-19 (0 days ago) dmi.bios.date: 02/28/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4202 dmi.board.asset.tag: Default string dmi.board.name: H110M-A/M.2 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4202:bd02/28/2019:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH110M-A/M.2:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer etcconfigcpepperflashpluginnonfree: flashso="/usr/lib/pepperflashplugin-nonfree/libpepflashplayer.so" flashversion=`strings $flashso 2> /dev/null | grep LNX | cut -d ' ' -f 2 | sed -e "s/,/./g"` CHROMIUM_FLAGS="$CHROMIUM_FLAGS --ppapi-flash-path=$flashso --ppapi-flash-version=$flashversion" modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1825497/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1825497] Re: flash player does not work in firefox or chromium
in my case it works in firefox, but in chrome and chromium doesn't -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1825497 Title: flash player does not work in firefox or chromium Status in chromium-browser package in Ubuntu: Confirmed Status in firefox package in Ubuntu: Confirmed Bug description: after you allow it to run it doesn't. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: chromium-browser 73.0.3683.103-0ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 Uname: Linux 5.0.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 DRM.card0-DP-1: enabled: disabled dpms: Off status: disconnected edid-base64: modes: DRM.card0-HDMI-A-1: enabled: enabled dpms: On status: connected edid-base64: AP///wAEcqMAdkcABTIUAQOANR146mCFplZKnCUSUFSzDABxT4EAlQDRwIGAAQEBAQEBAjqAGHE4LUBYLEUAEyohAAAa/ABWMjQzSAogICAgICAg/QA4TB9TEgAKICAgICAg/wBMRlYwQzAyMTQwRjEKAPU= modes: 1920x1080 1280x1024 1440x900 1280x800 1152x864 1024x768 1024x768 800x600 800x600 640x480 640x480 720x400 DRM.card0-HDMI-A-2: enabled: disabled dpms: Off status: disconnected edid-base64: modes: Date: Fri Apr 19 04:29:19 2019 Desktop-Session: 'ubuntu' '/etc/xdg/xdg-ubuntu:/etc/xdg' '/usr/share/ubuntu:/usr/local/share:/usr/share:/var/lib/snapd/desktop:/var/lib/snapd/desktop' DetectedPlugins: Env: 'None' 'None' ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2017-04-20 (729 days ago) InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) Load-Avg-1min: 1.18 Load-Processes-Running-Percent: 0.4% Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 04ca:0050 Lite-On Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: System manufacturer System Product Name ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=71d156ea-3173-43e9-9a5e-00edcd2137f2 ro splash quiet vt.handoff=1 SourcePackage: chromium-browser UpgradeStatus: Upgraded to disco on 2019-04-19 (0 days ago) dmi.bios.date: 02/28/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4202 dmi.board.asset.tag: Default string dmi.board.name: H110M-A/M.2 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4202:bd02/28/2019:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH110M-A/M.2:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.sku: SKU dmi.product.version: System Version dmi.sys.vendor: System manufacturer etcconfigcpepperflashpluginnonfree: flashso="/usr/lib/pepperflashplugin-nonfree/libpepflashplayer.so" flashversion=`strings $flashso 2> /dev/null | grep LNX | cut -d ' ' -f 2 | sed -e "s/,/./g"` CHROMIUM_FLAGS="$CHROMIUM_FLAGS --ppapi-flash-path=$flashso --ppapi-flash-version=$flashversion" modified.conffile..etc.default.chromium-browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1825497/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1823516] Re: Nvidia-418 installed but apps are using LLVMpipe/Mesa in Wayland sessions
Is there anything one can do to help resolving this issue? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1823516 Title: Nvidia-418 installed but apps are using LLVMpipe/Mesa in Wayland sessions Status in mesa package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-418 package in Ubuntu: Confirmed Status in xorg-server package in Ubuntu: Confirmed Bug description: Nvidia-418 installed but apps are using LLVMpipe/Mesa in Wayland sessions. I am using kernel parameter nvidia-drm.modeset=1, which is required to get the "Ubuntu on Wayland" option. But after logging in I see: $ glxinfo | grep OpenGL OpenGL vendor string: VMware, Inc. OpenGL renderer string: llvmpipe (LLVM 8.0, 256 bits) OpenGL core profile version string: 3.3 (Core Profile) Mesa 19.0.1 OpenGL core profile shading language version string: 3.30 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile OpenGL core profile extensions: OpenGL version string: 3.1 Mesa 19.0.1 OpenGL shading language version string: 1.40 OpenGL context flags: (none) OpenGL extensions: OpenGL ES profile version string: OpenGL ES 3.0 Mesa 19.0.1 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00 OpenGL ES profile extensions: $ es2_info | grep ^GL GL_VERSION: OpenGL ES 3.0 Mesa 19.0.1 GL_RENDERER: llvmpipe (LLVM 8.0, 256 bits) ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: nvidia-driver-418 418.56-0ubuntu1 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.10-0ubuntu25 Architecture: amd64 Date: Sun Apr 7 17:26:07 2019 InstallationDate: Installed on 2018-12-04 (124 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Alpha amd64 (20181203) SourcePackage: nvidia-graphics-drivers-418 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1823516/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1822754] Re: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup
** Description changed: To try the new support for EGLStreams and Wayland I have directly tried some programs to see how this performs. Unfortunately there are multiple problems: Chrome does not use GPU hardware acceleration anymore (I get huge CPU spikes while scrolling on normal pages). - Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The programs then are still scaled 2x on the Non-HIDPI screen. + Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The other programs are scaled 2x on the Non-HIDPI screen. I am running the latest NVIDIA Drivers with 418.56. Is there a fix for this behaviour? - Best + Best Nicolas ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Ist ein Verzeichnis: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: - NVRM version: NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 - GCC version: gcc version 8.3.0 (Ubuntu 8.3.0-3ubuntu1) + NVRM version: NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 + GCC version: gcc version 8.3.0 (Ubuntu 8.3.0-3ubuntu1) ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Keine Berechtigung: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue Apr 2 11:25:53 2019 DistUpgraded: 2019-03-31 23:11:06,205 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: disco DistroVariant: ubuntu DkmsStatus: - nvidia, 418.56, 5.0.0-8-generic, x86_64: installed - rtl8814au, 4.3.21, 4.18.0-16-generic, x86_64: installed - rtl8814au, 4.3.21, 5.0.0-8-generic, x86_64: installed + nvidia, 418.56, 5.0.0-8-generic, x86_64: installed + rtl8814au, 4.3.21, 4.18.0-16-generic, x86_64: installed + rtl8814au, 4.3.21, 5.0.0-8-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: - NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] [10de:1b82] (rev a1) (prog-if 00 [VGA controller]) -Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1070 Ti] [1462:c303] + NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] [10de:1b82] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1070 Ti] [1462:c303] InstallationDate: Installed on 2019-01-04 (87 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: MSI MS-7976 ProcEnviron: - PATH=(custom, no user) - XDG_RUNTIME_DIR= - LANG=de_DE.UTF-8 - SHELL=/usr/bin/zsh + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=de_DE.UTF-8 + SHELL=/usr/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.0.0-8-generic root=UUID=367ba2c7-63e9-46a2-9d19-aa86d3dcc21d ro quiet splash nvidia-drm.modeset=1 vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to disco on 2019-03-31 (1 days ago) dmi.bios.date: 04/25/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.I0 dmi.board.asset.tag: Default string dmi.board.name: Z170A GAMING M7 (MS-7976) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.I0:bd04/25/2017:svnMSI:pnMS-7976:pvr1.0:rvnMSI:rnZ170AGAMINGM7(MS-7976):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: Default string dmi.product.name: MS-7976 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: MSI nvidia-settings: - ERROR: Unable to find display on any available system - - - ERROR: Unable to find display on any available system + ERROR: Unable to find display on any available system + + ERROR: Unable to find display on any available system version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.1-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.1-1ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bu
[Desktop-packages] [Bug 1822754] Re: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup
And funny sidenode which may be also relevant: nvidia-settings gives me an empty program. ** Attachment added: "Bildschirmfoto vom 2019-04-05 13-22-58.png" https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1822754/+attachment/5253049/+files/Bildschirmfoto%20vom%202019-04-05%2013-22-58.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1822754 Title: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup Status in mutter package in Ubuntu: Incomplete Bug description: To try the new support for EGLStreams and Wayland I have directly tried some programs to see how this performs. Unfortunately there are multiple problems: Chrome does not use GPU hardware acceleration anymore (I get huge CPU spikes while scrolling on normal pages). Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The programs then are still scaled 2x on the Non-HIDPI screen. I am running the latest NVIDIA Drivers with 418.56. Is there a fix for this behaviour? Best Nicolas ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Ist ein Verzeichnis: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 GCC version: gcc version 8.3.0 (Ubuntu 8.3.0-3ubuntu1) ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Keine Berechtigung: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue Apr 2 11:25:53 2019 DistUpgraded: 2019-03-31 23:11:06,205 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: disco DistroVariant: ubuntu DkmsStatus: nvidia, 418.56, 5.0.0-8-generic, x86_64: installed rtl8814au, 4.3.21, 4.18.0-16-generic, x86_64: installed rtl8814au, 4.3.21, 5.0.0-8-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] [10de:1b82] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1070 Ti] [1462:c303] InstallationDate: Installed on 2019-01-04 (87 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: MSI MS-7976 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/usr/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.0.0-8-generic root=UUID=367ba2c7-63e9-46a2-9d19-aa86d3dcc21d ro quiet splash nvidia-drm.modeset=1 vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to disco on 2019-03-31 (1 days ago) dmi.bios.date: 04/25/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.I0 dmi.board.asset.tag: Default string dmi.board.name: Z170A GAMING M7 (MS-7976) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.I0:bd04/25/2017:svnMSI:pnMS-7976:pvr1.0:rvnMSI:rnZ170AGAMINGM7(MS-7976):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: Default string dmi.product.name: MS-7976 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: MSI nvidia-settings: ERROR: Unable to find display on any available system ERROR: Unable to find display on any available system version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.1-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.1-1ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1822754/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1822754] Re: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup
Ok thank you and sorry for the late reply I caught a cold over the last days: This is after installing the mutter builds: ➜ dpkg -l | grep 'mutter' ii gir1.2-mutter-4:amd64 3.32.0-1 amd64GObject introspection data for Mutter ii libmutter-4-0:amd643.32.0-1 amd64window manager library from the Mutter window manager ii libmutter-4-0-dbgsym:amd64 3.32.0-1 amd64debug symbols for libmutter-4-0 ii libmutter-4-dev:amd64 3.32.0-1 amd64Development files for the Mutter window manager ii mutter 3.32.0-1 amd64lightweight GTK+ window manager ii mutter-common 3.32.0-1 all shared files for the Mutter window manager ii mutter-dbgsym 3.32.0-1 amd64debug symbols for mutter Unfortunately Chrome,Firefox and other programs seem to run only software accelerated and do not adjust their scaling for example if moved from screen A (HiDPI) to screen B (low-DPI). ** Attachment added: "Here is the glxinfo.txt run during opened Chrome with one Window on each screen opened, so one is correctly scaled (on HIDPI) and one twice as large on screen 2" https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1822754/+attachment/5253043/+files/glxinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1822754 Title: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup Status in mutter package in Ubuntu: Incomplete Bug description: To try the new support for EGLStreams and Wayland I have directly tried some programs to see how this performs. Unfortunately there are multiple problems: Chrome does not use GPU hardware acceleration anymore (I get huge CPU spikes while scrolling on normal pages). Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The programs then are still scaled 2x on the Non-HIDPI screen. I am running the latest NVIDIA Drivers with 418.56. Is there a fix for this behaviour? Best Nicolas ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Ist ein Verzeichnis: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 GCC version: gcc version 8.3.0 (Ubuntu 8.3.0-3ubuntu1) ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Keine Berechtigung: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue Apr 2 11:25:53 2019 DistUpgraded: 2019-03-31 23:11:06,205 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: disco DistroVariant: ubuntu DkmsStatus: nvidia, 418.56, 5.0.0-8-generic, x86_64: installed rtl8814au, 4.3.21, 4.18.0-16-generic, x86_64: installed rtl8814au, 4.3.21, 5.0.0-8-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] [10de:1b82] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1070 Ti] [1462:c303] InstallationDate: Installed on 2019-01-04 (87 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: MSI MS-7976 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/usr/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.0.0-8-generic root=UUID=367ba2c7-63e9-46a2-9d19-aa86d3dcc21d ro quiet splash nvidia-drm.modeset=1 vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to disco on 2019-03-31 (1 days ago) dmi.bios.date: 04/25/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.I0 dmi.board.asset.tag: Default string dmi.board.name: Z170A GAMING M7 (MS-7976) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.I0:bd04/25/2017:svnMSI:pnMS-7976:pvr1.0:rvnMSI:rnZ170AGAMINGM7(MS-7976):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: Default string dmi.product.name: MS-7976 dmi.product.sku: Default string dmi.product.vers
[Desktop-packages] [Bug 1822754] Re: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup
Forgot to mention: I did of course restart after installing the new mutter packages. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mutter in Ubuntu. https://bugs.launchpad.net/bugs/1822754 Title: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup Status in mutter package in Ubuntu: Incomplete Bug description: To try the new support for EGLStreams and Wayland I have directly tried some programs to see how this performs. Unfortunately there are multiple problems: Chrome does not use GPU hardware acceleration anymore (I get huge CPU spikes while scrolling on normal pages). Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The programs then are still scaled 2x on the Non-HIDPI screen. I am running the latest NVIDIA Drivers with 418.56. Is there a fix for this behaviour? Best Nicolas ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Ist ein Verzeichnis: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 GCC version: gcc version 8.3.0 (Ubuntu 8.3.0-3ubuntu1) ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Keine Berechtigung: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue Apr 2 11:25:53 2019 DistUpgraded: 2019-03-31 23:11:06,205 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: disco DistroVariant: ubuntu DkmsStatus: nvidia, 418.56, 5.0.0-8-generic, x86_64: installed rtl8814au, 4.3.21, 4.18.0-16-generic, x86_64: installed rtl8814au, 4.3.21, 5.0.0-8-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] [10de:1b82] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1070 Ti] [1462:c303] InstallationDate: Installed on 2019-01-04 (87 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: MSI MS-7976 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/usr/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.0.0-8-generic root=UUID=367ba2c7-63e9-46a2-9d19-aa86d3dcc21d ro quiet splash nvidia-drm.modeset=1 vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to disco on 2019-03-31 (1 days ago) dmi.bios.date: 04/25/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.I0 dmi.board.asset.tag: Default string dmi.board.name: Z170A GAMING M7 (MS-7976) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.I0:bd04/25/2017:svnMSI:pnMS-7976:pvr1.0:rvnMSI:rnZ170AGAMINGM7(MS-7976):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: Default string dmi.product.name: MS-7976 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: MSI nvidia-settings: ERROR: Unable to find display on any available system ERROR: Unable to find display on any available system version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.1-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.1-1ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1822754/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1822754] [NEW] Chrome and other programs not resizing on HiDPI and Non-Hidpi setup
Public bug reported: To try the new support for EGLStreams and Wayland I have directly tried some programs to see how this performs. Unfortunately there are multiple problems: Chrome does not use GPU hardware acceleration anymore (I get huge CPU spikes while scrolling on normal pages). Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The programs then are still scaled 2x on the Non-HIDPI screen. I am running the latest NVIDIA Drivers with 418.56. Is there a fix for this behaviour? Best Nicolas ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature: Ubuntu 5.0.0-8.9-generic 5.0.1 Uname: Linux 5.0.0-8-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Ist ein Verzeichnis: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 GCC version: gcc version 8.3.0 (Ubuntu 8.3.0-3ubuntu1) ApportVersion: 2.20.10-0ubuntu23 Architecture: amd64 BootLog: Error: [Errno 13] Keine Berechtigung: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue Apr 2 11:25:53 2019 DistUpgraded: 2019-03-31 23:11:06,205 DEBUG Running PostInstallScript: './xorg_fix_proprietary.py' DistroCodename: disco DistroVariant: ubuntu DkmsStatus: nvidia, 418.56, 5.0.0-8-generic, x86_64: installed rtl8814au, 4.3.21, 4.18.0-16-generic, x86_64: installed rtl8814au, 4.3.21, 5.0.0-8-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070 Ti] [10de:1b82] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] GP104 [GeForce GTX 1070 Ti] [1462:c303] InstallationDate: Installed on 2019-01-04 (87 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: MSI MS-7976 ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/usr/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.0.0-8-generic root=UUID=367ba2c7-63e9-46a2-9d19-aa86d3dcc21d ro quiet splash nvidia-drm.modeset=1 vt.handoff=1 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to disco on 2019-03-31 (1 days ago) dmi.bios.date: 04/25/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.I0 dmi.board.asset.tag: Default string dmi.board.name: Z170A GAMING M7 (MS-7976) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.I0:bd04/25/2017:svnMSI:pnMS-7976:pvr1.0:rvnMSI:rnZ170AGAMINGM7(MS-7976):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.family: Default string dmi.product.name: MS-7976 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: MSI nvidia-settings: ERROR: Unable to find display on any available system ERROR: Unable to find display on any available system version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.97-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.1-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 19.0.1-1ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.0.1-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20180925-2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: wayland (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug disco performance possible-manual-nvidia-install ubuntu wayland-session ** Package changed: xorg (Ubuntu) => wayland (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1822754 Title: Chrome and other programs not resizing on HiDPI and Non-Hidpi setup Status in wayland package in Ubuntu: New Bug description: To try the new support for EGLStreams and Wayland I have directly tried some programs to see how this performs. Unfortunately there are multiple problems: Chrome does not use GPU hardware acceleration anymore (I get huge CPU spikes while scrolling on normal pages). Also the automatic resizing when a program is moved from one display to another only works with system applications such as settings, terminal etc. The programs then are still scaled 2x on the Non-HIDPI screen. I am running the latest NVIDIA Drivers with 418.56. Is there a fix for this behaviour? Best Nicolas ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: xorg 1:7.7+19ubuntu12 ProcVersionSignature:
[Desktop-packages] [Bug 1075923] Re: nautilus hangs copying large directories from a samba share
I confirm that on 18.10 is impossible to copy large files / directories from NAS via Samba Share. Everything works fine on Windows 10. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1075923 Title: nautilus hangs copying large directories from a samba share Status in gvfs: Fix Released Status in gvfs package in Ubuntu: Fix Released Status in gvfs source package in Precise: Confirmed Status in gvfs source package in Raring: Fix Released Bug description: Impact: copies from/to samba share often end up hanging Test case: - visit a smb location in nautilus - copies data from/to it (some non trivial directories makes the issues easier to trigger) - the copy should complete without hanging Regression potentiel: Check that nautilus is still working correctly and than you don't have issues copying data from/to remote locations --- Problem === Copying files to and from samba shares (this includes Windows shares) is unreliable in Ubuntu 12.10 and Ubuntu 13.04 when using nautilus' integrated samba client (gvfs-smb): The copy randomly hangs after a few files or a few GB. Workaround == Until gvfs-smb is fixed, use the kernel samba client (cifs) that works reliably, is faster, but needs some terminal commands to get going: # sudo -s # mkdir /mnt/cifs # mount -t cifs -o user=YOUR_SAMBA_USER -o uid=YOUR_LINUX_USER "//SAMBA_SERVER/SAMBA_SHARE" /mnt/cifs It will ask for you password, you can then access the shared files at /mnt/cifs. To manage notifications about this bug go to: https://bugs.launchpad.net/gvfs/+bug/1075923/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1773345] [NEW] package thunderbird-locale-nl 1:52.7.0+build1-0ubuntu1 failed to install/upgrade: kan uitgepakte gegevens voor './usr/lib/thunderbird-addons/extensions/langpack.
Public bug reported: I don't know ProblemType: Package DistroRelease: Ubuntu 18.04 Package: thunderbird-locale-nl 1:52.7.0+build1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.9-0ubuntu7 AptOrdering: thunderbird-locale-nl:amd64: Install thunderbird-locale-en:amd64: Install thunderbird:amd64: Install thunderbird-gnome-support:amd64: Install NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nico 1340 F pulseaudio BuildID: 20180522092033 Channel: Unavailable Date: Fri May 25 12:36:14 2018 ErrorMessage: kan uitgepakte gegevens voor './usr/lib/thunderbird-addons/extensions/langpack...@thunderbird.mozilla.org.xpi' niet kopiëren naar '/usr/lib/thunderbird-addons/extensions/langpack...@thunderbird.mozilla.org.xpi.dpkg-new': onverwacht einde van bestand of stroom ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2018-05-14 (10 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) IpRoute: default via 192.168.0.1 dev eno1 proto dhcp metric 100 169.254.0.0/16 dev eno1 scope link metric 1000 192.168.0.0/24 dev eno1 proto kernel scope link src 192.168.0.123 metric 100 NoProfiles: True PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.6, Python 3.6.5, python3-minimal, 3.6.5-3 PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal, 2.7.15~rc1-1 RelatedPackageVersions: dpkg 1.19.0.5ubuntu2 apt 1.6.1 RunningIncompatibleAddons: False SourcePackage: thunderbird Title: package thunderbird-locale-nl 1:52.7.0+build1-0ubuntu1 failed to install/upgrade: kan uitgepakte gegevens voor './usr/lib/thunderbird-addons/extensions/langpack...@thunderbird.mozilla.org.xpi' niet kopiëren naar '/usr/lib/thunderbird-addons/extensions/langpack...@thunderbird.mozilla.org.xpi.dpkg-new': onverwacht einde van bestand of stroom UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/18/2017 dmi.bios.vendor: Intel Corp. dmi.bios.version: BNKBL357.86A.0047.2017.0518.1824 dmi.board.name: NUC7i5BNB dmi.board.vendor: Intel Corporation dmi.board.version: J31144-305 dmi.chassis.type: 3 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2 dmi.modalias: dmi:bvnIntelCorp.:bvrBNKBL357.86A.0047.2017.0518.1824:bd05/18/2017:svnIntelCorporation:pnNUC7i5BNH:pvrJ31169-306:rvnIntelCorporation:rnNUC7i5BNB:rvrJ31144-305:cvnIntelCorporation:ct3:cvr2: dmi.product.family: Intel NUC dmi.product.name: NUC7i5BNH dmi.product.version: J31169-306 dmi.sys.vendor: Intel Corporation ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package bionic -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/1773345 Title: package thunderbird-locale-nl 1:52.7.0+build1-0ubuntu1 failed to install/upgrade: kan uitgepakte gegevens voor './usr/lib/thunderbird- addons/extensions/langpack...@thunderbird.mozilla.org.xpi' niet kopiëren naar '/usr/lib/thunderbird-addons/extensions/langpack- n...@thunderbird.mozilla.org.xpi.dpkg-new': onverwacht einde van bestand of stroom Status in thunderbird package in Ubuntu: New Bug description: I don't know ProblemType: Package DistroRelease: Ubuntu 18.04 Package: thunderbird-locale-nl 1:52.7.0+build1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-22.24-generic 4.15.17 Uname: Linux 4.15.0-22-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.9-0ubuntu7 AptOrdering: thunderbird-locale-nl:amd64: Install thunderbird-locale-en:amd64: Install thunderbird:amd64: Install thunderbird-gnome-support:amd64: Install NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nico 1340 F pulseaudio BuildID: 20180522092033 Channel: Unavailable Date: Fri May 25 12:36:14 2018 ErrorMessage: kan uitgepakte gegevens voor './usr/lib/thunderbird-addons/extensions/langpack...@thunderbird.mozilla.org.xpi' niet kopiëren naar '/usr/lib/thunderbird-addons/extensions/langpack...@thunderbird.mozilla.org.xpi.dpkg-new': onverwacht einde van bestand of stroom ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2018-05-14 (10 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) IpRoute:
[Desktop-packages] [Bug 1754274] [NEW] ubuntu-desktop is removed while applying security upgrade
Public bug reported: Hello, I use to apply only security upgrade using the update-manager popup (therefore there are always remaining a bunch of minor upgrades that are not critical and I choose not to apply). This morning I applied the security updates. Unfortunately it ended up removing ubuntu-desktop:amd64 package leaving the ubuntu installation broken. Here is the extract of the apt log : ``` Start-Date: 2018-03-08 07:04:43 Commandline: aptdaemon role='role-commit-packages' sender=':1.1271' Upgrade: unity-schemas:amd64 (7.4.5+16.04.20171201.3, 7.4.5+16.04.20180221-0ubuntu1), compiz-plugins-default:amd64 (1:0.9.12.3+16.04.20171116-0ub untu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), libdecoration0:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), compiz config-settings-manager:amd64 (1:0.9.12.2+16.04.20160823-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), python:amd64 (2.7.11-1, 2.7.12-1~16.04), libpq5:amd64 (9.5.11-0ubuntu0.16.04, 9.5.12-0ubuntu0.16.04), libpython-stdlib:amd64 (2.7.11-1, 2.7.12-1~16.04), unity-services:amd64 (7.4.5+16.04 .20171201.3, 7.4.5+16.04.20180221-0ubuntu1), compiz-gnome:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), libcomp izconfig0:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), code:amd64 (1.20.1-1518535978, 1.21.0-1520420608), pyth on-compizconfig:amd64 (1:0.9.12.2+16.04.20160823-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), compiz-core:amd64 (1:0.9.12.3+16.04.20171116-0ubu ntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), python-minimal:amd64 (2.7.11-1, 2.7.12-1~16.04) Remove: ubuntu-desktop:amd64 (1.361.1), unity:amd64 (7.4.5+16.04.20171201.3), session-shortcuts:amd64 (1.2ubuntu0.16.04.1), libunity-core-6.0-9:a md64 (7.4.5+16.04.20171201.3), unity-tweak-tool:amd64 (0.0.7ubuntu2) End-Date: 2018-03-08 07:05:20 ``` To repair it I had to manually install the package : ``` Start-Date: 2018-03-08 09:30:05 Commandline: apt install ubuntu-desktop Requested-By: thm (1000) Install: unity-schemas:amd64 (7.4.5+16.04.20180221-0ubuntu1, automatic), ubuntu-desktop:amd64 (1.361.1), unity:amd64 (7.4.5+16.04.20180221-0ubuntu1, automatic), deja-dup:amd64 (34.2-0ubuntu1.1, automatic), session-shortcuts:amd64 (1.2ubuntu0.16.04.1, automatic), libunity-core-6.0-9:amd64 (7.4.5+16.04.20180221-0ubuntu1, automatic), gnome-screensaver:amd64 (3.6.1-7ubuntu4, automatic) End-Date: 2018-03-08 09:30:17 ``` Maybe there is a package dependency problem here ? ** Affects: software-center (Ubuntu) Importance: Undecided Status: New ** Attachment added: "lsb_release.txt" https://bugs.launchpad.net/bugs/1754274/+attachment/5072733/+files/lsb_release.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1754274 Title: ubuntu-desktop is removed while applying security upgrade Status in software-center package in Ubuntu: New Bug description: Hello, I use to apply only security upgrade using the update-manager popup (therefore there are always remaining a bunch of minor upgrades that are not critical and I choose not to apply). This morning I applied the security updates. Unfortunately it ended up removing ubuntu-desktop:amd64 package leaving the ubuntu installation broken. Here is the extract of the apt log : ``` Start-Date: 2018-03-08 07:04:43 Commandline: aptdaemon role='role-commit-packages' sender=':1.1271' Upgrade: unity-schemas:amd64 (7.4.5+16.04.20171201.3, 7.4.5+16.04.20180221-0ubuntu1), compiz-plugins-default:amd64 (1:0.9.12.3+16.04.20171116-0ub untu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), libdecoration0:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), compiz config-settings-manager:amd64 (1:0.9.12.2+16.04.20160823-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), python:amd64 (2.7.11-1, 2.7.12-1~16.04), libpq5:amd64 (9.5.11-0ubuntu0.16.04, 9.5.12-0ubuntu0.16.04), libpython-stdlib:amd64 (2.7.11-1, 2.7.12-1~16.04), unity-services:amd64 (7.4.5+16.04 .20171201.3, 7.4.5+16.04.20180221-0ubuntu1), compiz-gnome:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), libcomp izconfig0:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), code:amd64 (1.20.1-1518535978, 1.21.0-1520420608), pyth on-compizconfig:amd64 (1:0.9.12.2+16.04.20160823-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), compiz-core:amd64 (1:0.9.12.3+16.04.20171116-0ubu ntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), python-minimal:amd64 (2.7.11-1, 2.7.12-1~16.04) Remove: ubuntu-desktop:amd64 (1.361.1), unity:amd64 (7.4.5+16.04.20171201.3), session-shortcuts:amd64 (1.2ubuntu0.16.04.1), libunity-core-6.0-9:a md64 (7.4.5+16.04.20171201.3), unity-tweak-tool:amd64 (0.0.7ubuntu2) End-Date: 2018-03-08 07:05:20 ``` To repair it I had to manually install t
[Desktop-packages] [Bug 1754274] Re: ubuntu-desktop is removed while applying security upgrade
apt history ** Attachment added: "apt_history.log" https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1754274/+attachment/5072734/+files/apt_history.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1754274 Title: ubuntu-desktop is removed while applying security upgrade Status in software-center package in Ubuntu: New Bug description: Hello, I use to apply only security upgrade using the update-manager popup (therefore there are always remaining a bunch of minor upgrades that are not critical and I choose not to apply). This morning I applied the security updates. Unfortunately it ended up removing ubuntu-desktop:amd64 package leaving the ubuntu installation broken. Here is the extract of the apt log : ``` Start-Date: 2018-03-08 07:04:43 Commandline: aptdaemon role='role-commit-packages' sender=':1.1271' Upgrade: unity-schemas:amd64 (7.4.5+16.04.20171201.3, 7.4.5+16.04.20180221-0ubuntu1), compiz-plugins-default:amd64 (1:0.9.12.3+16.04.20171116-0ub untu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), libdecoration0:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), compiz config-settings-manager:amd64 (1:0.9.12.2+16.04.20160823-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), python:amd64 (2.7.11-1, 2.7.12-1~16.04), libpq5:amd64 (9.5.11-0ubuntu0.16.04, 9.5.12-0ubuntu0.16.04), libpython-stdlib:amd64 (2.7.11-1, 2.7.12-1~16.04), unity-services:amd64 (7.4.5+16.04 .20171201.3, 7.4.5+16.04.20180221-0ubuntu1), compiz-gnome:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), libcomp izconfig0:amd64 (1:0.9.12.3+16.04.20171116-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), code:amd64 (1.20.1-1518535978, 1.21.0-1520420608), pyth on-compizconfig:amd64 (1:0.9.12.2+16.04.20160823-0ubuntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), compiz-core:amd64 (1:0.9.12.3+16.04.20171116-0ubu ntu1, 1:0.9.12.3+16.04.20180221-0ubuntu1), python-minimal:amd64 (2.7.11-1, 2.7.12-1~16.04) Remove: ubuntu-desktop:amd64 (1.361.1), unity:amd64 (7.4.5+16.04.20171201.3), session-shortcuts:amd64 (1.2ubuntu0.16.04.1), libunity-core-6.0-9:a md64 (7.4.5+16.04.20171201.3), unity-tweak-tool:amd64 (0.0.7ubuntu2) End-Date: 2018-03-08 07:05:20 ``` To repair it I had to manually install the package : ``` Start-Date: 2018-03-08 09:30:05 Commandline: apt install ubuntu-desktop Requested-By: thm (1000) Install: unity-schemas:amd64 (7.4.5+16.04.20180221-0ubuntu1, automatic), ubuntu-desktop:amd64 (1.361.1), unity:amd64 (7.4.5+16.04.20180221-0ubuntu1, automatic), deja-dup:amd64 (34.2-0ubuntu1.1, automatic), session-shortcuts:amd64 (1.2ubuntu0.16.04.1, automatic), libunity-core-6.0-9:amd64 (7.4.5+16.04.20180221-0ubuntu1, automatic), gnome-screensaver:amd64 (3.6.1-7ubuntu4, automatic) End-Date: 2018-03-08 09:30:17 ``` Maybe there is a package dependency problem here ? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1754274/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1583182] Re: error on 01ifupdown script
The first error message I'm getting is ``` Sep 12 14:28:41 foobar nm-dispatcher[27267]: /usr/sbin/fanctl: 41: /usr/sbin/fanctl: arithmetic expression: expecting primary: " (32-)/4 " ``` (Followed by the error messages in the original post.) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1583182 Title: error on 01ifupdown script Status in One Hundred Papercuts: Confirmed Status in network-manager package in Ubuntu: Confirmed Bug description: When bring the interface up or down I see this message on the logs May 18 10:03:36 count0 nm-dispatcher[8608]: req:1 'up' [enp2s0], "/etc/NetworkManager/dispatcher.d/01ifupdown": complete: failed with Script '/etc/NetworkManager/dispatcher.d/01ifupdown' exited with error status 1. May 18 10:03:36 count0 NetworkManager[791]: [1463576616.8466] dispatcher: (29) 01ifupdown failed (failed): Script '/etc/NetworkManager/dispatcher.d/01ifupdown' exited with error status 1. Tracing the problem I see that the call to /usr/sbin/fanctl is done with incorrect parameters. If I execute /etc/NetworkManager/dispatcher.d/01ifupdown enp2s0 down I get this error run-parts: /etc/network/if-post-down.d/ubuntu-fan exited with return code 1 ubuntu-fan is doing the call in following way /usr/sbin/fanctl net "$MODE" "$IFACE" and the parameters passed by ubuntu-fan are $MODE=stop $IFACE=enp2s0 but fanctl expect other parameters as showed on the script's header -- details lsb_release -rd Description: Ubuntu 16.04 LTS Release: 16.04 $ apt-cache policy network-manager network-manager: Installed: 1.1.93-0ubuntu4 Candidate: 1.1.93-0ubuntu4 Version table: *** 1.1.93-0ubuntu4 500 500 http://ar.archive.ubuntu.com/ubuntu xenial/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: network-manager 1.1.93-0ubuntu4 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Wed May 18 10:50:24 2016 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-04-23 (24 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) IpRoute: default via 192.168.1.1 dev enp2s0 proto static metric 100 169.254.0.0/16 dev enp2s0 scope link metric 1000 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown 172.18.0.0/16 dev br-76f79dfb13e0 proto kernel scope link src 172.18.0.1 linkdown 192.168.1.0/24 dev enp2s0 proto kernel scope link src 192.168.1.8 metric 100 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH br-76f79dfb13e0 bridgeconnected /org/freedesktop/NetworkManager/Devices/2 br-76f79dfb13e0 0a9f5c9b-cd67-4fb8-a72d-1811ca6fbb68 /org/freedesktop/NetworkManager/ActiveConnection/1 docker0 bridgeconnected /org/freedesktop/NetworkManager/Devices/3 docker0 e5f99f7d-532f-4c52-8749-c78afa9271dd /org/freedesktop/NetworkManager/ActiveConnection/2 enp2s0 ethernet connected /org/freedesktop/NetworkManager/Devices/0 Wired connection 1 ee3ec6ee-7242-4956-9d19-20ccb19c5fe5 /org/freedesktop/NetworkManager/ActiveConnection/8 lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/1 -- -- -- nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1583182/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1624317] Re: systemd-resolved breaks VPN with split-horizon DNS
Can confirm: #82 does the trick. Thanks Nicholas, you're awesome! Let's hope this goes into 17.04 release or at least in zesty-updates. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1624317 Title: systemd-resolved breaks VPN with split-horizon DNS Status in NetworkManager: Unknown Status in network-manager package in Ubuntu: Confirmed Status in network-manager source package in Zesty: Confirmed Status in network-manager source package in Artful: Confirmed Bug description: [Impact] * NetworkManager incorrectly handles dns-priority of the VPN-like connections, which leads to leaking DNS queries outside of the VPN into the general internet. * Upstream has resolved this issue in master and 1.8 to correctly configure any dns backends with negative dns-priority settings. [Test Case] #FIXME# * detailed instructions how to reproduce the bug * these should allow someone who is not familiar with the affected package to reproduce the bug and verify that the updated package fixes the problem. #FIXME# [Regression Potential] * If this issue is changed DNS resolution will change, for certain queries, to go via VPN rather than general internet. And therefore, one may get new/different results or even loose access to resolve/access certain parts of the interent depending on what the DNS server on VPN chooses to respond to. [Other Info] * Original bug report I use a VPN configured with network-manager-openconnect-gnome in which a split-horizon DNS setup assigns different addresses to some names inside the remote network than the addresses seen for those names from outside the remote network. However, systemd-resolved often decides to ignore the VPN’s DNS servers and use the local network’s DNS servers to resolve names (whether in the remote domain or not), breaking the split-horizon DNS. This related bug, reported by Lennart Poettering himself, was closed with the current Fedora release at the time reaching EOL: https://bugzilla.redhat.com/show_bug.cgi?id=1151544 To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1624317/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211110] Re: network manager openvpn dns push data not updating system DNS addresses
Can confirm: Still present in Kubuntu 17.04. Excerpt from /var/log/syslog: May 9 10:52:20 edbook NetworkManager[938]: [1494319940.4289] vpn-connection[0x561ae8e38690,34bc52ee-321f-42eb-af39-9dfc33ee2c5c,"WorkVPN",7:(tun0)]: Data: Internal DNS: 10.42.10.2 May 9 10:52:20 edbook NetworkManager[938]: [1494319940.4289] vpn-connection[0x561ae8e38690,34bc52ee-321f-42eb-af39-9dfc33ee2c5c,"WorkVPN",7:(tun0)]: Data: DNS Domain: '[localdomain_propagated_by_vpn]' ico@edbook:~$ nmcli device show tun0 GENERAL.DEVICE: tun0 GENERAL.TYPE: tun GENERAL.HWADDR: GENERAL.MTU:1500 GENERAL.STATE: 100 (connected) GENERAL.CONNECTION: tun0 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/10 IP4.ADDRESS[1]: 10.52.0.2/24 IP4.GATEWAY: IP4.ROUTE[1]: dst = 10.42.0.0/18, nh = 10.52.0.1, mt = 50 IP4.ROUTE[2]: dst = 10.42.90.0/24, nh = 10.52.0.1, mt = 50 IP4.ROUTE[3]: dst = 10.42.80.0/24, nh = 10.52.0.1, mt = 50 IP6.ADDRESS[1]: fe80::e9e3:17e7:f72:e672/64 IP6.GATEWAY: Also, since dnsmasq appears not to be used anymore in favor of systemd-resolved, the "old" workaround of commenting out the dns=dnsmasq line in NetworkManager.conf isn't applicable anymore. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/120 Title: network manager openvpn dns push data not updating system DNS addresses Status in network-manager package in Ubuntu: Expired Status in openvpn package in Ubuntu: Expired Bug description: [Triage Notes] This bug can no longer make progress. Please see comment 50 for details and further instructions. [Original Description] When IPv4 Method is set to Automatic VPN, DNS address recieved from OpenVPN server do not update resolv.conf. This can be achieved when using a standard openvpn config file by adding the lines: script-security 2 up /etc/openvpn/update-resolv-conf down /etc/openvpn/update-resolv-conf In Network-manager there seems to be no option to run connection specific scripts and the DNS data from the server is ignored. Ubuntu 13.04 Network-manager 0.9.8.0-0ubuntu6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/120/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1680301] [NEW] package thunderbird-locale-es-es 1:45.8.0+build1-0ubuntu0.16.10.1 failed to install/upgrade: El paquete está en un estado grave de inconsistencia - debe reinstal
Public bug reported: Every time I boot my system I encounter this error. It popups every time I boot my system ProblemType: Package DistroRelease: Ubuntu 16.10 Package: thunderbird-locale-es-es 1:45.8.0+build1-0ubuntu0.16.10.1 ProcVersionSignature: Ubuntu 4.8.0-46.49-generic 4.8.17 Uname: Linux 4.8.0-46-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.3-0ubuntu8.2 AptOrdering: NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicosafull 1808 F pulseaudio BuildID: 20170315131404 Channel: Unavailable Date: Sat Apr 1 14:01:04 2017 DpkgTerminalLog: [1mdpkg:[0m error al procesar el paquete thunderbird-locale-es-es (--configure): El paquete está en un estado grave de inconsistencia - debe reinstalarlo antes de intentar su configuración. ErrorMessage: El paquete está en un estado grave de inconsistencia - debe reinstalarlo antes de intentar su configuración. ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-06-09 (666 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) IpRoute: default via 192.168.0.1 dev wlan0 proto static metric 600 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.13 metric 600 NoProfiles: True PackageArchitecture: all PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: dpkg 1.18.10ubuntu1 apt 1.3.4 RunningIncompatibleAddons: False SourcePackage: thunderbird Title: package thunderbird-locale-es-es 1:45.8.0+build1-0ubuntu0.16.10.1 failed to install/upgrade: El paquete está en un estado grave de inconsistencia - debe reinstalarlo antes de intentar su configuración. UpgradeStatus: Upgraded to yakkety on 2017-02-28 (36 days ago) dmi.bios.date: 08/10/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K53E.221 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K53E dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK53E.221:bd08/10/2012:svnASUSTeKComputerInc.:pnK53E:pvr1.0:rvnASUSTeKComputerInc.:rnK53E:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: K53E dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package yakkety -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/1680301 Title: package thunderbird-locale-es-es 1:45.8.0+build1-0ubuntu0.16.10.1 failed to install/upgrade: El paquete está en un estado grave de inconsistencia - debe reinstalarlo antes de intentar su configuración. Status in thunderbird package in Ubuntu: New Bug description: Every time I boot my system I encounter this error. It popups every time I boot my system ProblemType: Package DistroRelease: Ubuntu 16.10 Package: thunderbird-locale-es-es 1:45.8.0+build1-0ubuntu0.16.10.1 ProcVersionSignature: Ubuntu 4.8.0-46.49-generic 4.8.17 Uname: Linux 4.8.0-46-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.3-0ubuntu8.2 AptOrdering: NULL: ConfigurePending Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicosafull 1808 F pulseaudio BuildID: 20170315131404 Channel: Unavailable Date: Sat Apr 1 14:01:04 2017 DpkgTerminalLog: [1mdpkg:[0m error al procesar el paquete thunderbird-locale-es-es (--configure): El paquete está en un estado grave de inconsistencia - debe reinstalarlo antes de intentar su configuración. ErrorMessage: El paquete está en un estado grave de inconsistencia - debe reinstalarlo antes de intentar su configuración. ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-06-09 (666 days ago) InstallationMedia: Xubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422.1) IpRoute: default via 192.168.0.1 dev wlan0 proto static metric 600 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.13 metric 600 NoProfiles: True PackageArchitecture: all PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: dpkg 1.18.10ubuntu1 apt 1.3.4 RunningIncompatibleAddons: False SourcePackage: thunderbird Title: packa
[Desktop-packages] [Bug 1554117] Re: gnome-software search bar duplicates letters while typing
THis affects me too.I tried installing the newer version of gnome- software from the developers options and still get the same exact letters duplicating. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1554117 Title: gnome-software search bar duplicates letters while typing Status in GNOME Software: Unknown Status in gnome-software package in Ubuntu: Confirmed Bug description: When entering text into the search bar at the top of the gnome- software application, the letters typed are doubled. In other words, if you enter, say, the letter "R", it the search bar will now contain "RR". Also, sometimes hitting the left arrow key in the search bar will delete both letters that were entered. Backspace does the same. The only way to get rid of the double letters is to try to navigate to the second letter and hit the delete key. Sometimes even that solution is inconsistent. This was tested on Ubuntu MATE 16.04 Beta 1. To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-software/+bug/1554117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1666318] Re: Disconnecting and reconnecting docking station breaks DNS
If it helps, commenting out/removing # dns=dnsmasq from /etc/NetworkManager/NetworkManager.conf makes the problem go away. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1666318 Title: Disconnecting and reconnecting docking station breaks DNS Status in network-manager package in Ubuntu: New Bug description: I'm not sure which package this bug should be submitted to as service troubleshooting in the latest few Ubuntu releases is a jumbled mess. Anyway, here's how to repro the problem: - Lenovo Carbon X1 2016 (4th gen), OneLink+ docking station - Ethernet connected to docking station - Disconnect docking station - Reconnect docking station From this point on all DNS requests fail. Workarounds I found so far: - reboot the machine (not really a solution) - sudo system network-manager restart (requires sudo access) - usually in older releases I'd just poke around with the resolver config files, but anything I do seems to be ignored now so I gave up and posted a bug instead. Here's the journalctl log for NetworkManager, followed by an example of the problem: nico@nico-lenovo-ubuntu:~$ journalctl -u NetworkManager -f -- Logs begin at Sun 2017-02-19 00:10:56 GMT. -- Feb 20 20:22:41 nico-lenovo-ubuntu NetworkManager[6715]: [1487622161.9976] dns-mgr: Writing DNS information to /sbin/resolvconf Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: setting upstream servers from DBus Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.4.100#53(via lan1) Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.8.100#53(via lan1) Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.4.100#53(via wifi0) Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.8.100#53(via wifi0) Feb 20 20:22:42 nico-lenovo-ubuntu NetworkManager[6715]: [1487622162.0156] device (wifi0): Activation: successful, device activated. Feb 20 20:22:42 nico-lenovo-ubuntu NetworkManager[6715]: [1487622162.0169] manager: startup complete Feb 20 20:22:43 nico-lenovo-ubuntu NetworkManager[6715]: [1487622163.1408] manager: WiFi hardware radio set enabled Feb 20 20:22:43 nico-lenovo-ubuntu NetworkManager[6715]: [1487622163.1409] manager: WWAN hardware radio set disabled Feb 20 20:27:40 nico-lenovo-ubuntu dhclient[6736]: receive_packet failed on lan1: Network is down Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1588] manager: NetworkManager state is now CONNECTED_LOCAL Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1589] manager: NetworkManager state is now CONNECTED_GLOBAL Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1590] policy: set 'Auto ITADINANTA' (wifi0) as default for IPv4 routing and DNS Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1590] device (lan1): state change: activated -> unmanaged (reason 'removed') [100 10 36] Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1594] dhcp4 (lan1): canceled DHCP transaction, DHCP client pid 6736 Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1595] dhcp4 (lan1): state changed bound -> done Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1618] dns-mgr: Writing DNS information to /sbin/resolvconf Feb 20 20:27:40 nico-lenovo-ubuntu dnsmasq[6728]: setting upstream servers from DBus Feb 20 20:27:40 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.4.100#53(via wifi0) Feb 20 20:27:40 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.8.100#53(via wifi0) Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1799] platform-linux: do-change-link[5]: failure changing link: failure 19 (No such device) Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1800] device (lan1): failed to disable userspace IPv6LL address handling Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1803] devices removed (path: /sys/devices/pci:00/:00:14.0/usb2/2-4/2-4.1/2-4.1.3/2-4.1.3:2.0/net/lan1, iface: lan1) Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.6972] device (eth0): failed to find device 6 'eth0' with udev Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.6990] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/4) Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.7679] device (eth0): interface index 6 renamed iface from 'eth0' to 'lan1' Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.7742] devices added (path: /sys/devices/pci:00/:00:14.0/
[Desktop-packages] [Bug 1666318] [NEW] Disconnecting and reconnecting docking station breaks DNS
Public bug reported: I'm not sure which package this bug should be submitted to as service troubleshooting in the latest few Ubuntu releases is a jumbled mess. Anyway, here's how to repro the problem: - Lenovo Carbon X1 2016 (4th gen), OneLink+ docking station - Ethernet connected to docking station - Disconnect docking station - Reconnect docking station >From this point on all DNS requests fail. Workarounds I found so far: - reboot the machine (not really a solution) - sudo system network-manager restart (requires sudo access) - usually in older releases I'd just poke around with the resolver config files, but anything I do seems to be ignored now so I gave up and posted a bug instead. Here's the journalctl log for NetworkManager, followed by an example of the problem: nico@nico-lenovo-ubuntu:~$ journalctl -u NetworkManager -f -- Logs begin at Sun 2017-02-19 00:10:56 GMT. -- Feb 20 20:22:41 nico-lenovo-ubuntu NetworkManager[6715]: [1487622161.9976] dns-mgr: Writing DNS information to /sbin/resolvconf Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: setting upstream servers from DBus Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.4.100#53(via lan1) Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.8.100#53(via lan1) Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.4.100#53(via wifi0) Feb 20 20:22:42 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.8.100#53(via wifi0) Feb 20 20:22:42 nico-lenovo-ubuntu NetworkManager[6715]: [1487622162.0156] device (wifi0): Activation: successful, device activated. Feb 20 20:22:42 nico-lenovo-ubuntu NetworkManager[6715]: [1487622162.0169] manager: startup complete Feb 20 20:22:43 nico-lenovo-ubuntu NetworkManager[6715]: [1487622163.1408] manager: WiFi hardware radio set enabled Feb 20 20:22:43 nico-lenovo-ubuntu NetworkManager[6715]: [1487622163.1409] manager: WWAN hardware radio set disabled Feb 20 20:27:40 nico-lenovo-ubuntu dhclient[6736]: receive_packet failed on lan1: Network is down Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1588] manager: NetworkManager state is now CONNECTED_LOCAL Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1589] manager: NetworkManager state is now CONNECTED_GLOBAL Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1590] policy: set 'Auto ITADINANTA' (wifi0) as default for IPv4 routing and DNS Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1590] device (lan1): state change: activated -> unmanaged (reason 'removed') [100 10 36] Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1594] dhcp4 (lan1): canceled DHCP transaction, DHCP client pid 6736 Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1595] dhcp4 (lan1): state changed bound -> done Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1618] dns-mgr: Writing DNS information to /sbin/resolvconf Feb 20 20:27:40 nico-lenovo-ubuntu dnsmasq[6728]: setting upstream servers from DBus Feb 20 20:27:40 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.4.100#53(via wifi0) Feb 20 20:27:40 nico-lenovo-ubuntu dnsmasq[6728]: using nameserver 194.168.8.100#53(via wifi0) Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1799] platform-linux: do-change-link[5]: failure changing link: failure 19 (No such device) Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1800] device (lan1): failed to disable userspace IPv6LL address handling Feb 20 20:27:40 nico-lenovo-ubuntu NetworkManager[6715]: [1487622460.1803] devices removed (path: /sys/devices/pci:00/:00:14.0/usb2/2-4/2-4.1/2-4.1.3/2-4.1.3:2.0/net/lan1, iface: lan1) Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.6972] device (eth0): failed to find device 6 'eth0' with udev Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.6990] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/4) Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.7679] device (eth0): interface index 6 renamed iface from 'eth0' to 'lan1' Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.7742] devices added (path: /sys/devices/pci:00/:00:14.0/usb2/2-4/2-4.1/2-4.1.3/2-4.1.3:2.0/net/lan1, iface: lan1) Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.7742] device added (path: /sys/devices/pci:00/:00:14.0/usb2/2-4/2-4.1/2-4.1.3/2-4.1.3:2.0/net/lan1, iface: lan1): no ifupdown configuration found. Feb 20 20:27:56 nico-lenovo-ubuntu NetworkManager[6715]: [1487622476.7745] device (lan1): state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Feb 20 20:27:56 nico-lenovo-ubuntu NetworkM
Re: [Desktop-packages] [Bug 1663763] [NEW] Firefox menu bar cannot be enabled
Found the solution: about:config ui.use_unity_menubar=false Who thought it was a good idea to enable it by default? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1663763 Title: Firefox menu bar cannot be enabled Status in firefox package in Ubuntu: New Bug description: On Xubuntu/desktop 16.10 - Menu bar appears on indicator - Menu bar cannot be enabled in customize This is a deal breaker. One of the main reasons why I use Firefox rather than Chrome on Linux is the menu bar. Should I use Chrome instead? ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: firefox 51.0.1+build2-0ubuntu0.16.10.2 ProcVersionSignature: Ubuntu 4.8.0-37.39-lowlatency 4.8.16 Uname: Linux 4.8.0-37-lowlatency x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nico 2150 F pulseaudio BuildID: 20170201174907 Channel: Unavailable CurrentDesktop: XFCE Date: Fri Feb 10 22:34:03 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2016-10-20 (113 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) IpRoute: default via 10.1.0.1 dev wifi0 proto static metric 600 10.1.0.0/16 dev wifi0 proto kernel scope link src 10.1.8.81 metric 600 169.254.0.0/16 dev wifi0 scope link metric 1000 Locales: extensions.sqlite corrupt or missing Plugins: Google Talk Plugin Video Renderer - /opt/google/talkplugin/libnpo1d.so (google-talkplugin) Google Talk Plugin - /opt/google/talkplugin/libnpgoogletalk.so (google-talkplugin) Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/foxypr...@eric.h.jung/defaults/preferences/prefs.js Profiles: Profile0 (Default) - LastVersion=51.0.1/20170201174907 (In use) RelatedPackageVersions: google-talkplugin 5.41.0.0-1 RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/02/2016 dmi.bios.vendor: LENOVO dmi.bios.version: N1FET43W (1.17 ) dmi.board.asset.tag: Not Available dmi.board.name: 20FBCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN1FET43W(1.17):bd08/02/2016:svnLENOVO:pn20FBCTO1WW:pvrThinkPadX1Carbon4th:rvnLENOVO:rn20FBCTO1WW:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20FBCTO1WW dmi.product.version: ThinkPad X1 Carbon 4th dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1663763/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1663763] [NEW] Firefox menu bar cannot be enabled
Public bug reported: On Xubuntu/desktop 16.10 - Menu bar appears on indicator - Menu bar cannot be enabled in customize This is a deal breaker. One of the main reasons why I use Firefox rather than Chrome on Linux is the menu bar. Should I use Chrome instead? ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: firefox 51.0.1+build2-0ubuntu0.16.10.2 ProcVersionSignature: Ubuntu 4.8.0-37.39-lowlatency 4.8.16 Uname: Linux 4.8.0-37-lowlatency x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nico 2150 F pulseaudio BuildID: 20170201174907 Channel: Unavailable CurrentDesktop: XFCE Date: Fri Feb 10 22:34:03 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2016-10-20 (113 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) IpRoute: default via 10.1.0.1 dev wifi0 proto static metric 600 10.1.0.0/16 dev wifi0 proto kernel scope link src 10.1.8.81 metric 600 169.254.0.0/16 dev wifi0 scope link metric 1000 Locales: extensions.sqlite corrupt or missing Plugins: Google Talk Plugin Video Renderer - /opt/google/talkplugin/libnpo1d.so (google-talkplugin) Google Talk Plugin - /opt/google/talkplugin/libnpgoogletalk.so (google-talkplugin) Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/foxypr...@eric.h.jung/defaults/preferences/prefs.js Profiles: Profile0 (Default) - LastVersion=51.0.1/20170201174907 (In use) RelatedPackageVersions: google-talkplugin 5.41.0.0-1 RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/02/2016 dmi.bios.vendor: LENOVO dmi.bios.version: N1FET43W (1.17 ) dmi.board.asset.tag: Not Available dmi.board.name: 20FBCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN1FET43W(1.17):bd08/02/2016:svnLENOVO:pn20FBCTO1WW:pvrThinkPadX1Carbon4th:rvnLENOVO:rn20FBCTO1WW:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20FBCTO1WW dmi.product.version: ThinkPad X1 Carbon 4th dmi.sys.vendor: LENOVO ** Affects: firefox (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug yakkety -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1663763 Title: Firefox menu bar cannot be enabled Status in firefox package in Ubuntu: New Bug description: On Xubuntu/desktop 16.10 - Menu bar appears on indicator - Menu bar cannot be enabled in customize This is a deal breaker. One of the main reasons why I use Firefox rather than Chrome on Linux is the menu bar. Should I use Chrome instead? ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: firefox 51.0.1+build2-0ubuntu0.16.10.2 ProcVersionSignature: Ubuntu 4.8.0-37.39-lowlatency 4.8.16 Uname: Linux 4.8.0-37-lowlatency x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nico 2150 F pulseaudio BuildID: 20170201174907 Channel: Unavailable CurrentDesktop: XFCE Date: Fri Feb 10 22:34:03 2017 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2016-10-20 (113 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) IpRoute: default via 10.1.0.1 dev wifi0 proto static metric 600 10.1.0.0/16 dev wifi0 proto kernel scope link src 10.1.8.81 metric 600 169.254.0.0/16 dev wifi0 scope link metric 1000 Locales: extensions.sqlite corrupt or missing Plugins: Google Talk Plugin Video Renderer - /opt/google/talkplugin/libnpo1d.so (google-talkplugin) Google Talk Plugin - /opt/google/talkplugin/libnpgoogletalk.so (google-talkplugin) Shockwave Flash - /usr/lib/flashplugin-installer/libflashplayer.so PrefSources: prefs.js [Profile]/extensions/{3d7eb24f-2740-49df-8937-200b1cc08f8a}/defaults/preferences/flashblock.js [Profile]/extensions/f
[Desktop-packages] [Bug 1662147] Re: Cannot stop pulseaudio
It is probably a bug of indicator-sound? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1662147 Title: Cannot stop pulseaudio Status in pulseaudio package in Ubuntu: New Bug description: I need to kill pulseaudio as I'm using Jackd instead. I don't want to delete it as I may need it back again. So far the only workaround I found was to delete /usr/bin/pulseaudio (or move it out of the way). norru@GBWWSRUNUBWS02:~$ pulseaudio -k norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30111 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30230 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30250 28914 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30252 28942 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30297 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29941 1 1 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30469 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29941 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30486 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ pulseaudio -k norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30489 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30493 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30506 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ubuntu-bug pulseaudio norru@GBWWSRUNUBWS02:~$ sudo service pulseaudio stop norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30493 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ kill 30493 norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32318 1 1 11:32 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ kill -9 32318 norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32361 8557 0 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32363 32361 0 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32364 32363 1 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32364 1 1 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32381 29396 0 11:34 pts/000:00:00 grep --color=auto pulse ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: pulseaudio 1:9.0-2ubuntu2.1 ProcVersionSignature: Ubuntu 4.8.0-34.36-generic 4.8.11 Uname: Linux 4.8.0-34-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: norru 30493 F pulseaudio /dev/snd/controlC0: norru 30493 F pulseaudio CurrentDesktop: X-Cinnamon Date: Mon Feb 6 11:28:49 2017 InstallationDate: Installed on 2015-06-10 (606 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: Upgraded to yakkety on 2016-10-31 (97 days ago) dmi.bios.date: 10/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4502 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9X79 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufactu
[Desktop-packages] [Bug 1662147] Re: Cannot stop pulseaudio
Seems to be respawned by norru 8557 1 0 Jan23 ?00:00:15 /usr/lib/x86_64-linux- gnu/indicator-sound/indicator-sound-service -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1662147 Title: Cannot stop pulseaudio Status in pulseaudio package in Ubuntu: New Bug description: I need to kill pulseaudio as I'm using Jackd instead. I don't want to delete it as I may need it back again. So far the only workaround I found was to delete /usr/bin/pulseaudio (or move it out of the way). norru@GBWWSRUNUBWS02:~$ pulseaudio -k norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30111 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30230 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30250 28914 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30252 28942 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30297 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29941 1 1 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30469 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29941 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30486 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ pulseaudio -k norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30489 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30493 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30506 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ubuntu-bug pulseaudio norru@GBWWSRUNUBWS02:~$ sudo service pulseaudio stop norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30493 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ kill 30493 norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32318 1 1 11:32 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ kill -9 32318 norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32361 8557 0 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32363 32361 0 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32364 32363 1 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32364 1 1 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32381 29396 0 11:34 pts/000:00:00 grep --color=auto pulse ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: pulseaudio 1:9.0-2ubuntu2.1 ProcVersionSignature: Ubuntu 4.8.0-34.36-generic 4.8.11 Uname: Linux 4.8.0-34-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: norru 30493 F pulseaudio /dev/snd/controlC0: norru 30493 F pulseaudio CurrentDesktop: X-Cinnamon Date: Mon Feb 6 11:28:49 2017 InstallationDate: Installed on 2015-06-10 (606 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: Upgraded to yakkety on 2016-10-31 (97 days ago) dmi.bios.date: 10/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4502 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9X79 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx d
[Desktop-packages] [Bug 1662147] [NEW] Cannot stop pulseaudio
Public bug reported: I need to kill pulseaudio as I'm using Jackd instead. I don't want to delete it as I may need it back again. So far the only workaround I found was to delete /usr/bin/pulseaudio (or move it out of the way). norru@GBWWSRUNUBWS02:~$ pulseaudio -k norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30111 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30230 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29938 8557 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29940 29938 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru29941 29940 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30250 28914 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30252 28942 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30297 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29941 1 1 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30469 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru29941 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30486 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ pulseaudio -k norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30489 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30493 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru30506 29396 0 11:27 pts/000:00:00 grep --color=auto pulse norru@GBWWSRUNUBWS02:~$ ubuntu-bug pulseaudio norru@GBWWSRUNUBWS02:~$ sudo service pulseaudio stop norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru30493 1 0 11:27 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ kill 30493 norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32318 1 1 11:32 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ kill -9 32318 norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32361 8557 0 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32363 32361 0 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32364 32363 1 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru@GBWWSRUNUBWS02:~$ ps -ef | grep pulse norru32364 1 1 11:34 ?00:00:00 /usr/bin/pulseaudio --start --log-target=syslog norru32381 29396 0 11:34 pts/000:00:00 grep --color=auto pulse ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: pulseaudio 1:9.0-2ubuntu2.1 ProcVersionSignature: Ubuntu 4.8.0-34.36-generic 4.8.11 Uname: Linux 4.8.0-34-generic x86_64 NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: norru 30493 F pulseaudio /dev/snd/controlC0: norru 30493 F pulseaudio CurrentDesktop: X-Cinnamon Date: Mon Feb 6 11:28:49 2017 InstallationDate: Installed on 2015-06-10 (606 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) SourcePackage: pulseaudio UpgradeStatus: Upgraded to yakkety on 2016-10-31 (97 days ago) dmi.bios.date: 10/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4502 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9X79 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4502:bd10/15/2013:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP9X79:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** T
[Desktop-packages] [Bug 1653787] Re: gs does not terminate and does not produce output when writing with pdfwrite
** Description changed: - The following command never terminates: + The following command never terminates, one CPU/thread up 100%: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. I have obtained this test case from an old debian bug report at the URL below, as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. + Terminating the process with ctrl+c, output file is generated but + contains no data. + https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ghostscript in Ubuntu. https://bugs.launchpad.net/bugs/1653787 Title: gs does not terminate and does not produce output when writing with pdfwrite Status in ghostscript package in Ubuntu: New Bug description: The following command never terminates, one CPU/thread up 100%: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. I have obtained this test case from an old debian bug report at the URL below, as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. Terminating the process with ctrl+c, output file is generated but contains no data. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/1653787/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1653787] Re: gs does not terminate and does not produce output when writing with pdfwrite
Small file ** Attachment added: "test.ps" https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/1653787/+attachment/4799531/+files/test.ps -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ghostscript in Ubuntu. https://bugs.launchpad.net/bugs/1653787 Title: gs does not terminate and does not produce output when writing with pdfwrite Status in ghostscript package in Ubuntu: New Bug description: The following command never terminates: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. I have obtained this test case from an old debian bug report at the URL below, as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/1653787/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1653787] Re: gs does not terminate and does not produce output when writing with pdfwrite
Large file (bunzip to manual.ps to reproduce) ** Attachment added: "manual.ps.bz2" https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/1653787/+attachment/4799532/+files/manual.ps.bz2 ** Description changed: The following command never terminates: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. - - I have obtained this test case from an old debian bug report at , as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. Let me know if you need the larger file. + I have obtained this test case from an old debian bug report at , as I + have originally encountered the problem with a *much larger* postscript + file (214MB), which I've left running for 24 hours with no progress. I + have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) ** Description changed: The following command never terminates: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. - I have obtained this test case from an old debian bug report at , as I - have originally encountered the problem with a *much larger* postscript - file (214MB), which I've left running for 24 hours with no progress. I - have attached both files. + I have obtained this test case from an old debian bug report at the URL + below, as I have originally encountered the problem with a *much larger* + postscript file (214MB), which I've left running for 24 hours with no + progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ghostscript in Ubuntu. https://bugs.launchpad.net/bugs/1653787 Title: gs does not terminate and does not produce output when writing with pdfwrite Status in ghostscript package in Ubuntu: New Bug description: The following command never terminates: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. I have obtained this test case from an old debian bug report at the URL below, as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/1653787/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1653787] [NEW] gs does not terminate and does not produce output when writing with pdfwrite
Public bug reported: The following command never terminates: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. I have obtained this test case from an old debian bug report at the URL below, as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ghostscript (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug yakkety -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ghostscript in Ubuntu. https://bugs.launchpad.net/bugs/1653787 Title: gs does not terminate and does not produce output when writing with pdfwrite Status in ghostscript package in Ubuntu: New Bug description: The following command never terminates: gs -sDEVICE=pdfwrite -sOutputFile=test.pdf -f test.ps This is more or less what ps2pdf test.ps does. I have obtained this test case from an old debian bug report at the URL below, as I have originally encountered the problem with a *much larger* postscript file (214MB), which I've left running for 24 hours with no progress. I have attached both files. Both files (the small one and the large one) get read by gv and displayed perfectly on screen. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=786827 ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: ghostscript 9.19~dfsg+1-0ubuntu6.3 ProcVersionSignature: Ubuntu 4.8.0-32.34-lowlatency 4.8.11 Uname: Linux 4.8.0-32-lowlatency x86_64 ApportVersion: 2.20.3-0ubuntu8.2 Architecture: amd64 CurrentDesktop: X-Cinnamon Date: Tue Jan 3 20:48:44 2017 InstallationDate: Installed on 2016-10-20 (74 days ago) InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2) SourcePackage: ghostscript UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/1653787/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1451728] Re: [master] kde-config-telepathy-accounts package install error
You can use dpkg --remove. It'll complain that you can't uninstall package $X because $Y depends on it; when that happens, try dpkg --remove $Y (and so on, until it doesn't complain anymore). You won't be able to install the package you needed but at least apt-get should be usable again. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libaccounts-glib in Ubuntu. https://bugs.launchpad.net/bugs/1451728 Title: [master] kde-config-telepathy-accounts package install error Status in Kubuntu PPA: Fix Released Status in meta-telepathy: Fix Released Status in kaccounts-integration package in Ubuntu: In Progress Status in kaccounts-providers package in Ubuntu: Triaged Status in ktp-accounts-kcm package in Ubuntu: Triaged Status in libaccounts-glib package in Ubuntu: Fix Released Status in kaccounts-providers source package in Wily: Triaged Status in ktp-accounts-kcm source package in Wily: Triaged Bug description: Installing from Kubuntu 15.04 backports: Unpacking kde-config-telepathy-accounts (15.04.0-0ubuntu1~ubuntu15.04~ppa1) over (0.9.0-0ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/kde-config-telepathy-accounts_15.04.0-0ubuntu1~ubuntu15.04~ppa1_amd64.deb (--unpack): trying to overwrite '/usr/share/accounts/services/facebook-im.service', which is also in package account-plugin-facebook 0.12+15.04.20150415.1-0ubuntu1 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) To manage notifications about this bug go to: https://bugs.launchpad.net/kubuntu-ppa/+bug/1451728/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1574045] Re: Can't install account-plugin-google; kaccounts-providers already provides /usr/share/accounts/providers/google.provider
*** This bug is a duplicate of bug 1451728 *** https://bugs.launchpad.net/bugs/1451728 This has been broken for at least two releases now. The solution seems to be to wipe the whole installation and hope you don't install the wrong package next time. Preparing to unpack .../account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb ... Unpacking account-plugin-google (0.12+16.04.20160126-0ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb (--unpack): trying to overwrite '/usr/share/accounts/providers/google.provider', which is also in package kaccounts-providers 4:15.12.3-0ubuntu1 Errors were encountered while processing: /var/cache/apt/archives/account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to account-plugins in Ubuntu. https://bugs.launchpad.net/bugs/1574045 Title: Can't install account-plugin-google; kaccounts-providers already provides /usr/share/accounts/providers/google.provider Status in Online Accounts: Account plugins: New Status in kaccounts-providers: Fix Released Status in account-plugins package in Ubuntu: Confirmed Status in kaccounts-providers package in Ubuntu: Fix Released Bug description: I installed Kubuntu 16.04, later tried to install unity with `sudo apt-get install unity` which has a dependency (unity-scope-gdrive) requiring account-plugin-google and that wouldn't install since '/usr/share/accounts/providers/google.provider' is already provided by kaccounts-providers: $ sudo apt-get install unity Reading package lists... Done Building dependency tree Reading state information... Done unity is already the newest version (7.4.0+16.04.20160415-0ubuntu1). You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: unity-scope-gdrive : Depends: account-plugin-google but it is not going to be installed $ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following additional packages will be installed: account-plugin-google The following NEW packages will be installed: account-plugin-google 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 250 not fully installed or removed. Need to get 0 B/3,368 B of archives. After this operation, 29.7 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 214947 files and directories currently installed.) Preparing to unpack .../account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb ... Unpacking account-plugin-google (0.12+16.04.20160126-0ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb (--unpack): trying to overwrite '/usr/share/accounts/providers/google.provider', which is also in package kaccounts-providers 4:15.12.3-0ubuntu1 Errors were encountered while processing: /var/cache/apt/archives/account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1Preparing to unpack .../account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb ... Unpacking account-plugin-google (0.12+16.04.20160126-0ubuntu1) ... dpkg: error processing archive /var/cache/apt/archives/account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb (--unpack): trying to overwrite '/usr/share/accounts/providers/google.provider', which is also in package kaccounts-providers 4:15.12.3-0ubuntu1 Errors were encountered while processing: /var/cache/apt/archives/account-plugin-google_0.12+16.04.20160126-0ubuntu1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: account-plugin-google (not installed) ProcVersionSignature: Ubuntu 4.4.0-21.37-generic 4.4.6 Uname: Linux 4.4.0-21-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 CurrentDesktop: KDE Date: Sat Apr 23 11:09:16 2016 InstallationDate: Installed on 2016-04-23 (0 days ago) InstallationMedia: Kubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160417.1) SourcePackage: account-plugins UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/account-plugins/+bug/1574045/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1362848] Re: ubuntu 14.04 after install nvidia binary driver 331.89 black screen and freeze
Similar problem here in 14.04: "Black screen with nvidia drivers enabled, fine with Intel drivers, and the workaround of closing the lid worked." Solution proposed by #40 solved it in ubuntu 14.04. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1362848 Title: ubuntu 14.04 after install nvidia binary driver 331.89 black screen and freeze Status in nvidia-graphics-drivers-331 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-340 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-346 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-352 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-355 package in Ubuntu: Confirmed Bug description: I'm using Ubuntu 14.04 64bit, after install nvidia binary driver 331.89 from Additional Drivers application then reboot, it shows black screen, no login window, I even can't use ctrl+alt+F2 to switch to text mode, then I reboot and go to recovery mode, use 'prime-select intel' to switch to intel GPU and reboot, everything is fine, but as soon as I switch to nvidia GPU, still same issue. OS: Ubuntu 14.04 64bit Laptop: HP ENVY 15t Nvidia GeForce GT 740M + Intel HD 4600 Desktop: Unity Kernel: 3.13.0 CPU: Intel® Core™ i7-4700MQ Thanks! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1362848/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1494184] [NEW] package software-center 13.10-0ubuntu8 failed to install/upgrade: triggers looping, abandoned
Public bug reported: je ne sais pas ce qu'il se passe ProblemType: Package DistroRelease: Ubuntu 15.10 Package: software-center 13.10-0ubuntu8 ProcVersionSignature: Ubuntu 4.2.0-9.9-generic 4.2.0 Uname: Linux 4.2.0-9-generic x86_64 ApportVersion: 2.18-0ubuntu9 AptOrdering: app-install-data: Install app-install-data: Configure NULL: ConfigurePending Architecture: amd64 Date: Thu Sep 10 10:35:53 2015 DuplicateSignature: package:software-center:13.10-0ubuntu8:triggers looping, abandoned ErrorMessage: triggers looping, abandoned PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.2ubuntu3 apt 1.0.9.10ubuntu6 SourcePackage: software-center Title: package software-center 13.10-0ubuntu8 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: software-center (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1494184 Title: package software-center 13.10-0ubuntu8 failed to install/upgrade: triggers looping, abandoned Status in software-center package in Ubuntu: New Bug description: je ne sais pas ce qu'il se passe ProblemType: Package DistroRelease: Ubuntu 15.10 Package: software-center 13.10-0ubuntu8 ProcVersionSignature: Ubuntu 4.2.0-9.9-generic 4.2.0 Uname: Linux 4.2.0-9-generic x86_64 ApportVersion: 2.18-0ubuntu9 AptOrdering: app-install-data: Install app-install-data: Configure NULL: ConfigurePending Architecture: amd64 Date: Thu Sep 10 10:35:53 2015 DuplicateSignature: package:software-center:13.10-0ubuntu8:triggers looping, abandoned ErrorMessage: triggers looping, abandoned PackageArchitecture: all RelatedPackageVersions: dpkg 1.18.2ubuntu3 apt 1.0.9.10ubuntu6 SourcePackage: software-center Title: package software-center 13.10-0ubuntu8 failed to install/upgrade: triggers looping, abandoned UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1494184/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1453655] Re: desktop icons disappear on Ubuntu 15.04 when clicking Open Dropbox folder
I have just installed 15.04 and experienced the same issue that Ilan reported. Upon reading this thread, I upgraded Nautilus to the proposed version (1:3.14.2-0ubuntu9.1), and can confirm that the problem is gone. So far, no other problems detected. Thanks for the support. -Nico -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1453655 Title: desktop icons disappear on Ubuntu 15.04 when clicking Open Dropbox folder Status in Nautilus: Fix Released Status in nautilus package in Ubuntu: Fix Released Status in nautilus-dropbox package in Ubuntu: Invalid Status in nautilus source package in Vivid: Fix Committed Status in nautilus source package in Wily: Fix Released Bug description: I've been using both Ubuntu and dropbox for several years. With Ubuntu 15.04 there is a new problem that my desktop icons disappear when I click on the dropbox icon in the status bar and choose Open Dropbox Folder. Then the desktop icons will disappear - but will remain visible in Files -> Desktop. The only way I know to get the desktop icons back is to log out and then log back in again. The bug is 100% reproducible, and it never appeared before 15.04. I also have Copy on my status bar. Clicking on Copy -> Open Copy Folder has no problems. Likewise I can use File with a right click and use Open a New Window and that too is OK. Only dropbox has a problem and only since 15.04 If I can help in any way, please contact me ilan.tal - at - gmail.com [Impact] DE-agnostic programs that invoke nautilus using "nautilus --no-desktop" will make the nautilus-rendered desktop vanish. Dropbox is one such case. [Test Case] 1. Launch nautilus, and make sure it is currently rendering the desktop. 2. Run "nautilus --no-desktop /" 3. See if the desktop vanishes. [Regression Potential] The patch is relatively trivial, only affecting the --no-desktop codepath. As a worst case, --no-desktop would not function correctly in cases where nautilus is not already running (--no-desktop when nautilus is not already running means nautilus should not render the desktop at all). Just to make sure, this additional test case should be used: 1. Kill nautilus, and make sure it doesn't get relaunched. 2. Check to see what the desktop looks like (shouldn't be rendered by nautilus, at least) 3. Launch "nautilus --no-desktop /" 4. Make sure that nautilus really doesn't render a desktop. To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1453655/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1416875] Re: apache-2.4.10 dies in reload
We are having the same problem with Ubuntu 14.04 and the following modules: core_module (static) so_module (static) watchdog_module (static) http_module (static) log_config_module (static) logio_module (static) version_module (static) unixd_module (static) access_compat_module (shared) alias_module (shared) auth_basic_module (shared) auth_form_module (shared) authn_core_module (shared) authn_file_module (shared) authnz_ldap_module (shared) authz_core_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) filter_module (shared) headers_module (shared) ldap_module (shared) mime_module (shared) mpm_prefork_module (shared) negotiation_module (shared) php5_module (shared) request_module (shared) security2_module (shared) session_module (shared) session_cookie_module (shared) session_crypto_module (shared) session_dbd_module (shared) setenvif_module (shared) socache_shmcb_module (shared) ssl_module (shared) status_module (shared) unique_id_module (shared) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to redland-bindings in Ubuntu. https://bugs.launchpad.net/bugs/1416875 Title: apache-2.4.10 dies in reload Status in redland-bindings package in Ubuntu: Confirmed Bug description: net3# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.10 Release: 14.10 Codename: utopic Different than https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/669005 which has to do with php5-curl. I deinstalled php5-curl + had no effect. Using trace8 provides no additional detail. Unable to get apache to generate a core dump, even after reading many articles + trying many command line incantations. Someone tell me how to get a core dump + I'll post the stack trace of failure. Thanks. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/redland-bindings/+bug/1416875/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1447956] Re: Banshee interface unresponsive after upgrade to 15.04
Any ETA for vivid-proposed or vivid-updates? Thanks! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to banshee in Ubuntu. https://bugs.launchpad.net/bugs/1447956 Title: Banshee interface unresponsive after upgrade to 15.04 Status in Banshee Music Player: New Status in banshee package in Ubuntu: Fix Released Status in banshee source package in Vivid: New Status in banshee package in Debian: Fix Released Bug description: I upgraded to the newest version yesterday. Some times it ran yesterday but i had some issues too. Today I cannot run it at all. When I start it from terminal I get amongst others: [Info 10:07:03.122] All services are started 0.997291 But all I get is an unresponsive white window. I will attach the entire terminal output bellow. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: banshee 2.9.0+really2.6.2-2ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Apr 24 10:10:53 2015 ExecutablePath: /usr/lib/banshee/Banshee.exe InstallationDate: Installed on 2013-12-29 (480 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) InterpreterPath: /usr/bin/mono-sgen SourcePackage: banshee UpgradeStatus: Upgraded to vivid on 2015-04-23 (0 days ago) [Impact] The SQLite performance regression has caused Banshee to hang on startup and become completely unusable. [Test Case] Launch banshee. See if it starts up correctly. [Regression Potential] Negligible -- it's hard to get any worse than completely unusable. [Other info] The fix has been in Debian unstable for a couple of months now with no new related bugs. To manage notifications about this bug go to: https://bugs.launchpad.net/banshee/+bug/1447956/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1458329] [NEW] hplip has wrong order of udev rules ⇒ scanner ACLs not set
Public bug reported: hplip installs 56-hpmud.rules in /lib/udev/rules.d/, which comes *after* 40-libsane.rules. For HP scanners recognized by 56-hpmud.rules, but not by 40-libsane.rules, ENV{libsane_matched} is set to ‘yes’, which is correct. But as 56-hpmud.rules is evaluated *after* 40-libsane.rules, the rule from 40-libsane.rules which has ‘RUN+="/bin/setfacl -m g:scanner:rw $env{DEVNAME}"’ is not executed anymore. This leads to the ACLs for the scanner group *not* being set for the device. In my case, the device is 03f0:4f11 (an HP OfficeJet 5610, known as “Hewlett-Packard OfficeJet 5600”). hplip version is 3.14.3-0ubuntu3.2 on Ubuntu 14.04.2 LTS (trusty). What I tried: copied /lib/udev/rules.d/56-hpmud.rules to /etc/udev/rules.d/10-localoverride.rules – worked fine, ACLs set properly. ** Affects: hplip (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1458329 Title: hplip has wrong order of udev rules ⇒ scanner ACLs not set Status in hplip package in Ubuntu: New Bug description: hplip installs 56-hpmud.rules in /lib/udev/rules.d/, which comes *after* 40-libsane.rules. For HP scanners recognized by 56-hpmud.rules, but not by 40-libsane.rules, ENV{libsane_matched} is set to ‘yes’, which is correct. But as 56-hpmud.rules is evaluated *after* 40-libsane.rules, the rule from 40-libsane.rules which has ‘RUN+="/bin/setfacl -m g:scanner:rw $env{DEVNAME}"’ is not executed anymore. This leads to the ACLs for the scanner group *not* being set for the device. In my case, the device is 03f0:4f11 (an HP OfficeJet 5610, known as “Hewlett-Packard OfficeJet 5600”). hplip version is 3.14.3-0ubuntu3.2 on Ubuntu 14.04.2 LTS (trusty). What I tried: copied /lib/udev/rules.d/56-hpmud.rules to /etc/udev/rules.d/10-localoverride.rules – worked fine, ACLs set properly. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1458329/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1354924] Re: Networkmanager does not autoconnect to wireless network
Same problem here on Kubuntu 14.10 on a Dell Latitude E6410 (Intel 5 Series Chipset). Everything worked flawlessly before the upgrade from 14.04 to 14.10. I also tried the supposed fix from #51, but that didn't help. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1354924 Title: Networkmanager does not autoconnect to wireless network Status in network-manager package in Ubuntu: Confirmed Bug description: When adding a net wireless network and enable "connect automatically' networkmanager does not automatically connect to the network wenever possible. I'm running kubuntu 14.10 daily. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: network-manager 0.9.8.8-0ubuntu23 ProcVersionSignature: Ubuntu 3.16.0-6.11-generic 3.16.0-rc7 Uname: Linux 3.16.0-6-generic x86_64 ApportVersion: 2.14.5-0ubuntu4 Architecture: amd64 CurrentDesktop: KDE Date: Sun Aug 10 21:30:03 2014 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2014-07-11 (29 days ago) InstallationMedia: Kubuntu 14.10 "Utopic Unicorn" - Alpha amd64 (20140710) IpRoute: default via 192.168.0.2 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.213 metric 9 SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1354924/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1375782] Re: Unable to perform search error when syncing Evolution with Google Contacts
I have the same problem too. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1375782 Title: Unable to perform search error when syncing Evolution with Google Contacts Status in “evolution” package in Ubuntu: Confirmed Status in “evolution” package in Arch Linux: New Bug description: Hello, When trying to synchronise Google Contacts with Evolution, I am getting the error message: The backend for this address book was unable to parse this query. GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._e_2dclient_2derror_2dquark.Code16: Invalid request URI or header, or unsupported nonstandard parameter: http://schemas.google.com/g/2005";> GData invalid Bad updated-min timestamp format: 2014-09-30T12:48:18.01 00:00 My system is Ubunru 14.10, Evolution 3.12.6. Before updating to Ubuntu 14.10 (in 14.04) it worked without an error. Ruben To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1375782/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1211110] Re: network manager openvpn dns push data not updating resolv.conf
I can confirm that this bug does not occur when you disable dnsmasq for NetworkManager. However, I wanted to add how you can do so: Open /etc/NetworkManager/NetworkManager.conf in an editor and change dns=dnsmasq to this: #dns=dnsmasq Then, restart NetworkManager: sudo service network-manager restart -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/120 Title: network manager openvpn dns push data not updating resolv.conf Status in “network-manager” package in Ubuntu: Confirmed Status in “openvpn” package in Ubuntu: Confirmed Bug description: When IPv4 Method is set to Automatic VPN, DNS address recieved from OpenVPN server do not update resolv.conf. This can be achieved when using a standard openvpn config file by adding the lines: script-security 2 up /etc/openvpn/update-resolv-conf down /etc/openvpn/update-resolv-conf In Network-manager there seems to be no option to run connection specific scripts and the DNS data from the server is ignored. Ubuntu 13.04 Network-manager 0.9.8.0-0ubuntu6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/120/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1371811] [NEW] cheese crashes when try to record video
Public bug reported: Cheese display "There was an error playing video from the webcam" webcam logitec ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: cheese 3.10.2-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic i686 ApportVersion: 2.14.1-0ubuntu3.4 Architecture: i386 CurrentDesktop: Unity Date: Fri Sep 19 23:13:44 2014 InstallationDate: Installed on 2014-09-15 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release i386 (20140722.2) SourcePackage: cheese UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: cheese (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cheese in Ubuntu. https://bugs.launchpad.net/bugs/1371811 Title: cheese crashes when try to record video Status in “cheese” package in Ubuntu: New Bug description: Cheese display "There was an error playing video from the webcam" webcam logitec ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: cheese 3.10.2-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic i686 ApportVersion: 2.14.1-0ubuntu3.4 Architecture: i386 CurrentDesktop: Unity Date: Fri Sep 19 23:13:44 2014 InstallationDate: Installed on 2014-09-15 (4 days ago) InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release i386 (20140722.2) SourcePackage: cheese UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cheese/+bug/1371811/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1221593] Re: ibus-ui-gtk3 crashed with SIGABRT in _g_log_abort()
?? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1221593 Title: ibus-ui-gtk3 crashed with SIGABRT in _g_log_abort() Status in “ibus” package in Ubuntu: Triaged Bug description: ? ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: ibus 1.5.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 CasperVersion: 1.336 Date: Fri Sep 6 07:53:22 2013 ExecutablePath: /usr/lib/ibus/ibus-ui-gtk3 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130905) MarkForUpload: True ProcCmdline: /usr/lib/ibus/ibus-ui-gtk3 ProcEnviron: TERM=linux PATH=(custom, no user) LANG=de_DE.UTF-8 Signal: 6 SourcePackage: ibus StacktraceTop: ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0 g_assertion_message () from /lib/i386-linux-gnu/libglib-2.0.so.0 g_assertion_message_expr () from /lib/i386-linux-gnu/libglib-2.0.so.0 ?? () ?? () Title: ibus-ui-gtk3 crashed with SIGABRT in g_assertion_message() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1221593/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 521070] Re: simple-scan crashed with SIGSEGV in g_thread_create_proxy()
? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to simple-scan in Ubuntu. https://bugs.launchpad.net/bugs/521070 Title: simple-scan crashed with SIGSEGV in g_thread_create_proxy() Status in “simple-scan” package in Ubuntu: Fix Released Bug description: Binary package hint: simple-scan I had scanned a document as text and then went on to scan again but this time as a photo when simple-scan crashed. My scanner is actually connected to another system and I'm using sane to connect to it. Here are some messages from the server's syslog file: Feb 12 08:22:20 bizarro saned[5645]: check_host: access by remote host: :::192.168.10.2 Feb 12 08:22:20 bizarro saned[5645]: init: access granted to saned-user@:::192.168.10.2 Feb 12 08:22:28 bizarro saned[5645]: process_request: bad status 22 Feb 12 08:22:28 bizarro saned[5645]: quit: exiting Feb 12 08:22:39 bizarro saned[5647]: check_host: access by remote host: :::192.168.10.2 Feb 12 08:22:39 bizarro saned[5647]: init: access granted to saned-user@:::192.168.10.2 Feb 12 08:22:48 bizarro saned[5647]: quit: exiting ProblemType: Crash Architecture: amd64 Date: Fri Feb 12 08:22:25 2010 DistroRelease: Ubuntu 10.04 ExecutablePath: /usr/bin/simple-scan Package: simple-scan 0.8.2-0ubuntu1 ProcCmdline: simple-scan ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/zsh ProcVersionSignature: Ubuntu 2.6.32-13.18-generic SegvAnalysis: Segfault happened at: 0x40e58b: mov(%rax),%rdi PC (0x0040e58b) ok source "(%rax)" (0x) not located in a known VMA region (needed readable region)! destination "%rdi" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: simple-scan StacktraceTop: ?? () g_thread_create_proxy (data=0xf9a4d0) start_thread (arg=) clone () ?? () Title: simple-scan crashed with SIGSEGV in g_thread_create_proxy() Uname: Linux 2.6.32-13-generic x86_64 UserGroups: adm admin audio cdrom dialout dip family floppy fuse libvirtd lpadmin plugdev pulse pulse-access sambashare sbuild scanner video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/521070/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1326842] [NEW] can't click on warning window, window not active
Public bug reported: http://askubuntu.com/questions/477228/cant-click-on-warning-window- window-not-active When I want to connect to a network using a certificate, and I don't provide one, the network manager will open the window "No Certificate Authority certificate chosen", with the buttons "Ignore" and "Choose a CA certificate". I would like to "Ignore", but I can't click on the popped-up window. The window below ("Authentication required by Wi-Fi network") remains active, and I can click anything there, e.g., "Cancel". Pressing the tab-key doesn't to anything, and the alt+tab list just contains one entity "Network". Consequence: I cannot connect to the network. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11 Uname: Linux 3.13.0-27-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: GNOME Date: Thu Jun 5 17:05:27 2014 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-15 (202 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) IpRoute: default via 192.168.43.1 dev eth1 proto static 192.168.43.0/24 dev eth1 proto kernel scope link src 192.168.43.14 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to trusty on 2014-04-17 (48 days ago) nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth1 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1326842 Title: can't click on warning window, window not active Status in “network-manager” package in Ubuntu: New Bug description: http://askubuntu.com/questions/477228/cant-click-on-warning-window- window-not-active When I want to connect to a network using a certificate, and I don't provide one, the network manager will open the window "No Certificate Authority certificate chosen", with the buttons "Ignore" and "Choose a CA certificate". I would like to "Ignore", but I can't click on the popped-up window. The window below ("Authentication required by Wi-Fi network") remains active, and I can click anything there, e.g., "Cancel". Pressing the tab-key doesn't to anything, and the alt+tab list just contains one entity "Network". Consequence: I cannot connect to the network. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-27.50-generic 3.13.11 Uname: Linux 3.13.0-27-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: GNOME Date: Thu Jun 5 17:05:27 2014 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2013-11-15 (202 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) IpRoute: default via 192.168.43.1 dev eth1 proto static 192.168.43.0/24 dev eth1 proto kernel scope link src 192.168.43.14 metric 9 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to trusty on 2014-04-17 (48 days ago) nmcli-dev: DEVICE TYPE STATE DBUS-PATH eth1 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1326842/+subscriptions -- Mailing list: https://launchpad.ne
[Desktop-packages] [Bug 1205055] Re: Impossible to change column width of Nautilus in list view
*** This bug is a duplicate of bug 1243806 *** https://bugs.launchpad.net/bugs/1243806 Same problem here on fresh install of Ubuntu 14.04 x64. How can problems like this happen? There have been thousands of table-like browsers with multiple columns for decades. Why the need for changing everything in every new release??? Functionality changes, location of buttons, or options appear and disappear like random in each release! It's so annoying!!! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1205055 Title: Impossible to change column width of Nautilus in list view Status in “nautilus” package in Ubuntu: Confirmed Bug description: In Gnome Nautilus 3.8.2 under kernel 3.8.0-26-generic (64-bit), using the mouse to change column width is unavailing. It's as if these widths are hard coded. This seems to be a reversion, since the problem has been reported by various people ever since 2007. Now, 6 years later, the bug remains unswatted. This sort of thing is an embarrassment to Ubuntu. Can something be done? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1205055/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1277238] [NEW] The shortcut to the current playing song does't always work
Public bug reported: When I use a inteligent playlist (in my case the list of songs never played), I am unable to use the menu option (or ctrl+j) to go to the current playing song. While the music is playing (started from the inteligent playlist) if I go to the list of all the music I can't go to the current song with ctrl+J. It works with standard playlist (m3u). Please let me know if I can be of any help. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: banshee 2.6.1-2ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Thu Feb 6 20:50:42 2014 MarkForUpload: True SourcePackage: banshee UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: banshee (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug saucy third-party-packages -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to banshee in Ubuntu. https://bugs.launchpad.net/bugs/1277238 Title: The shortcut to the current playing song does't always work Status in “banshee” package in Ubuntu: New Bug description: When I use a inteligent playlist (in my case the list of songs never played), I am unable to use the menu option (or ctrl+j) to go to the current playing song. While the music is playing (started from the inteligent playlist) if I go to the list of all the music I can't go to the current song with ctrl+J. It works with standard playlist (m3u). Please let me know if I can be of any help. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: banshee 2.6.1-2ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Thu Feb 6 20:50:42 2014 MarkForUpload: True SourcePackage: banshee UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/banshee/+bug/1277238/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 875002] Re: choosing quit from unity launcher doesn't close rhythmbox if music is playing
There are also this unconsistency where right clicking on the dash icon and selecting the quit option behaves like clicking on the cross and not like the file->quit option. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/875002 Title: choosing quit from unity launcher doesn't close rhythmbox if music is playing Status in Ayatana Design: New Status in One Hundred Papercuts: Triaged Status in “rhythmbox” package in Ubuntu: Confirmed Bug description: To reproduce: Start rhythmbox. Start playing a song. Left click rhythmbox icon in unity launcher. Choose Quit. Application doesn't quit, music keeps playing, only the window closes. To really quit the application, put the song on pause and then choose quit. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: rhythmbox 2.90.1~20110908-0ubuntu1 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 1.23-0ubuntu3 Architecture: amd64 Date: Sat Oct 15 15:43:51 2011 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LC_CTYPE=en_GB.UTF-8 PATH=(custom, user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: rhythmbox UpgradeStatus: Upgraded to oneiric on 2011-10-14 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-design/+bug/875002/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1258966] [NEW] Inconsistent behavior when quitting rhythmbox
Public bug reported: For a user there are three ways I know for quitting an application : - File->quit - Alt+F4 - Click on the cross of the window - Right click on the icon in the dash and select quit According to these 4 methods there are two cases to consider : either a music is played or not. While not playing : the application is always unloaded from the memory whichever the way used (that is good) While playing : only the quit option in the file menu really unload the application. The three others options rather hide the main windows (background play) so that : - it is impossible to remove the application from the memory without opening a new window; - it is difficult to predict what will be the behavior of closing the window or using the dash quit option. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: rhythmbox 2.98-0ubuntu5 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Sun Dec 8 22:09:52 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/rhythmbox InstallationDate: Installed on 2013-06-10 (181 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: rhythmbox UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: rhythmbox (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 raring -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1258966 Title: Inconsistent behavior when quitting rhythmbox Status in “rhythmbox” package in Ubuntu: New Bug description: For a user there are three ways I know for quitting an application : - File->quit - Alt+F4 - Click on the cross of the window - Right click on the icon in the dash and select quit According to these 4 methods there are two cases to consider : either a music is played or not. While not playing : the application is always unloaded from the memory whichever the way used (that is good) While playing : only the quit option in the file menu really unload the application. The three others options rather hide the main windows (background play) so that : - it is impossible to remove the application from the memory without opening a new window; - it is difficult to predict what will be the behavior of closing the window or using the dash quit option. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: rhythmbox 2.98-0ubuntu5 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Sun Dec 8 22:09:52 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/rhythmbox InstallationDate: Installed on 2013-06-10 (181 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: rhythmbox UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1258966/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1254376] [NEW] Brightness settings changes have no effect.
Public bug reported: On my laptop (acer aspire one V5-131) which uses Ubuntu 13.04, the change of the brightness settings have no effect on the brightness in the settings application. When I press the shortcut for changing the brightness (Fn+Left & Fn+Right), the notification of the new brightness level is correctly displayed but again it has no effect on the brightness of the screen (and it neither update the level in the settings application). Please, see in the attached file (Brightness.txt) what I do for changing the brightness on my computer from the console. I don't know anything about the settings software stack but since it works from the console I don't think it is a driver problem but rather a software problem somewhere or maybe a missing symlink. Though the keyboard shortcut are not working properly, the problem could also be below gnome-control-center. Please contact me for any question or if I can be of any help for the correction. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Sun Nov 24 07:39:09 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-06-10 (166 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 raring ** Attachment added: "Change the brigtness from the console." https://bugs.launchpad.net/bugs/1254376/+attachment/3915713/+files/Brightness.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1254376 Title: Brightness settings changes have no effect. Status in “gnome-control-center” package in Ubuntu: New Bug description: On my laptop (acer aspire one V5-131) which uses Ubuntu 13.04, the change of the brightness settings have no effect on the brightness in the settings application. When I press the shortcut for changing the brightness (Fn+Left & Fn+Right), the notification of the new brightness level is correctly displayed but again it has no effect on the brightness of the screen (and it neither update the level in the settings application). Please, see in the attached file (Brightness.txt) what I do for changing the brightness on my computer from the console. I don't know anything about the settings software stack but since it works from the console I don't think it is a driver problem but rather a software problem somewhere or maybe a missing symlink. Though the keyboard shortcut are not working properly, the problem could also be below gnome-control-center. Please contact me for any question or if I can be of any help for the correction. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: gnome-control-center 1:3.6.3-0ubuntu24.1 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Sun Nov 24 07:39:09 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/gnome-control-center InstallationDate: Installed on 2013-06-10 (166 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: deja-dup26.0-0ubuntu1 gnome-control-center-signon 0.1.6bzr13.04.05-0ubuntu1.1 gnome-control-center-unity 1.3daily13.06.19~13.04-0ubuntu1 indicator-datetime 12.10.3daily13.03.26-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1254376/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1248888] Re: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout
Referenced 712145 in gnome bugzilla . -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/124 Title: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout Status in “nautilus” package in Ubuntu: New Bug description: Step to reproduce : - select the french bepo keyboard in the list of layouts - open nautilus and create a folder - when it asks a name for the folder, try to give a name containing an underscore (AltGr+space on the bépo layout) - as soon as you press the AltGr key the focus is lost and the name of the folder stays «Untitled Folder» Remarks : - I am using a qwerty keyboard with the french bépo layout - There is no problem for entering underscore when I am renaming the previously created «Untitled Folder» ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu16 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Thu Nov 7 14:59:56 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'1315x714+49+24'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'153' InstallationDate: Installed on 2013-06-10 (149 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/124/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1248888] Re: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout
Additional remark : it only happens in list mode. In icon mode it works fine. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/124 Title: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout Status in “nautilus” package in Ubuntu: New Bug description: Step to reproduce : - select the french bepo keyboard in the list of layouts - open nautilus and create a folder - when it asks a name for the folder, try to give a name containing an underscore (AltGr+space on the bépo layout) - as soon as you press the AltGr key the focus is lost and the name of the folder stays «Untitled Folder» Remarks : - I am using a qwerty keyboard with the french bépo layout - There is no problem for entering underscore when I am renaming the previously created «Untitled Folder» ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu16 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Thu Nov 7 14:59:56 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'1315x714+49+24'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'153' InstallationDate: Installed on 2013-06-10 (149 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/124/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1248888] Re: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout
I think this key is not binded to anything but just to make sure I launched the keyboard tool. It seems binded to nothing but in english layout, pressing the key open the «command menu» (such as the left alt key does). But in bépo layout, it does nothing. So, in the tab «shortcut» I tryed to temporary set the AltGr key to some unused shortcut functionality : - When the qwerty layout is selected the key is recognize as a "Alt R" key; - When the bépo layout is selected the key is recognize as a "Level 3 shift" key. Please see the uploaded screenshot I don't know what is this kind of key "Level 3 shift". Bépo layout is the equivalent of the dvorak layout (but applied to french). On a bépo keyboard layout, this AltGr key is useful for dealing with foreign language and input char like ñ ã ú ś ¿ ¡ ù ï © ß ... Remark, whenever I try to bind this "Level 3 shift" to a shortcut, the shortcut never works when the key is pressed. ** Attachment added: "Two layout recognize the same physical key differently" https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/124/+attachment/3902360/+files/ShortcutBindingRecognition.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/124 Title: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout Status in “nautilus” package in Ubuntu: New Bug description: Step to reproduce : - select the french bepo keyboard in the list of layouts - open nautilus and create a folder - when it asks a name for the folder, try to give a name containing an underscore (AltGr+space on the bépo layout) - as soon as you press the AltGr key the focus is lost and the name of the folder stays «Untitled Folder» Remarks : - I am using a qwerty keyboard with the french bépo layout - There is no problem for entering underscore when I am renaming the previously created «Untitled Folder» ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu16 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Thu Nov 7 14:59:56 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'1315x714+49+24'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'153' InstallationDate: Installed on 2013-06-10 (149 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/124/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1248888] [NEW] Folder creation naming is canceled when name contains underscore with french bepo keyboard layout
Public bug reported: Step to reproduce : - select the french bepo keyboard in the list of layouts - open nautilus and create a folder - when it asks a name for the folder, try to give a name containing an underscore (AltGr+space on the bépo layout) - as soon as you press the AltGr key the focus is lost and the name of the folder stays «Untitled Folder» Remarks : - I am using a qwerty keyboard with the french bépo layout - There is no problem for entering underscore when I am renaming the previously created «Untitled Folder» ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu16 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Thu Nov 7 14:59:56 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'1315x714+49+24'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'153' InstallationDate: Installed on 2013-06-10 (149 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 raring -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/124 Title: Folder creation naming is canceled when name contains underscore with french bepo keyboard layout Status in “nautilus” package in Ubuntu: New Bug description: Step to reproduce : - select the french bepo keyboard in the list of layouts - open nautilus and create a folder - when it asks a name for the folder, try to give a name containing an underscore (AltGr+space on the bépo layout) - as soon as you press the AltGr key the focus is lost and the name of the folder stays «Untitled Folder» Remarks : - I am using a qwerty keyboard with the french bépo layout - There is no problem for entering underscore when I am renaming the previously created «Untitled Folder» ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: nautilus 1:3.6.3-0ubuntu16 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic i686 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: i386 Date: Thu Nov 7 14:59:56 2013 EcryptfsInUse: Yes ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'1315x714+49+24'" b'org.gnome.nautilus.window-state' b'sidebar-width' b'153' InstallationDate: Installed on 2013-06-10 (149 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/124/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1165452] Re: evolution-source-registry crashed with SIGABRT in raise()
j'y connais peu de choses mais je n'ai plus unity affiché -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution-data-server in Ubuntu. https://bugs.launchpad.net/bugs/1165452 Title: evolution-source-registry crashed with SIGABRT in raise() Status in “evolution-data-server” package in Ubuntu: Confirmed Bug description: . ProblemType: Crash DistroRelease: Ubuntu 13.04 Package: evolution-data-server 3.6.4-0ubuntu1 ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5 Uname: Linux 3.8.0-16-generic x86_64 ApportVersion: 2.9.2-0ubuntu5 Architecture: amd64 Date: Mon Apr 1 22:33:14 2013 ExecutablePath: /usr/lib/evolution/evolution-source-registry MarkForUpload: True ProcCmdline: /usr/lib/evolution/evolution-source-registry ProcEnviron: SHELL=/bin/bash XDG_RUNTIME_DIR= PATH=(custom, no user) LANGUAGE=en_US:en LANG=en_US.UTF-8 Signal: 6 SourcePackage: evolution-data-server StacktraceTop: raise () from /lib/x86_64-linux-gnu/libc.so.6 abort () from /lib/x86_64-linux-gnu/libc.so.6 g_assertion_message () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_assertion_message_error () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0 Title: evolution-source-registry crashed with SIGABRT in raise() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip libvirtd lpadmin plugdev sambashare sbuild sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1165452/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075923] Re: nautilus hangs copying large directories from a samba share
Kanehekili, please can you explain how to remove gvfs and replace it with cifs in Ubuntu 12.10? This would be a workaround Thanks! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1075923 Title: nautilus hangs copying large directories from a samba share Status in “gvfs” package in Ubuntu: Confirmed Bug description: I have a large directory, almost 50Gb and 45.000 files shared by samba on ubuntu 12.04.1 LTS server. I used to copy the whole directory regularly on my desktop, and execute a backup with deja dup on that. I did also often backup directly from the samba share. After upgrading my client to 12.10, copying the directory hangs randomly, sometimes after having copied just 1 Gb, others having almost completed the whole transfer. It just hangs, without any crash. I noted the also Deja -dup shows the same behaviour, now it's impossible to complete a backup from the share, it just hangs. It seems to me that a bug in the samba client might be the cause of these issues, since neither nautilus nor Deja-dup have problems with local large directories. my system: Ubuntu 12.10 AMD64 nautilus: 1:3.5.90.really.3.4.2-0ubuntu4 deja-dup: deja-dup 24.0-0ubuntu1 smbclient 2:3.6.6-3ubuntu5 samba-common: 2:3.6.6-3ubuntu5 samba-common-bin: 2:3.6.6-3ubuntu5 ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: nautilus 1:3.5.90.really.3.4.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 Date: Wed Nov 7 12:05:58 2012 GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'825x550+853+471'" InstallationDate: Installed on 2012-10-22 (16 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1075923/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075923] Re: nautilus hangs copying large directories from a samba share
I do not understand why, after over two months, this confirmed bug is still Unassigned... :-( -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1075923 Title: nautilus hangs copying large directories from a samba share Status in “gvfs” package in Ubuntu: Confirmed Bug description: I have a large directory, almost 50Gb and 45.000 files shared by samba on ubuntu 12.04.1 LTS server. I used to copy the whole directory regularly on my desktop, and execute a backup with deja dup on that. I did also often backup directly from the samba share. After upgrading my client to 12.10, copying the directory hangs randomly, sometimes after having copied just 1 Gb, others having almost completed the whole transfer. It just hangs, without any crash. I noted the also Deja -dup shows the same behaviour, now it's impossible to complete a backup from the share, it just hangs. It seems to me that a bug in the samba client might be the cause of these issues, since neither nautilus nor Deja-dup have problems with local large directories. my system: Ubuntu 12.10 AMD64 nautilus: 1:3.5.90.really.3.4.2-0ubuntu4 deja-dup: deja-dup 24.0-0ubuntu1 smbclient 2:3.6.6-3ubuntu5 samba-common: 2:3.6.6-3ubuntu5 samba-common-bin: 2:3.6.6-3ubuntu5 ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: nautilus 1:3.5.90.really.3.4.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 Date: Wed Nov 7 12:05:58 2012 GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'825x550+853+471'" InstallationDate: Installed on 2012-10-22 (16 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1075923/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075923] Re: nautilus hangs copying large directories from a samba share
It also affects me. When I try to copy files from QNAP NAS share, samba randomly hangs without any notice. Using a clean install of Ubuntu 12.10 (32 bit). This problem was not present in Ubuntu 12.04. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1075923 Title: nautilus hangs copying large directories from a samba share Status in “nautilus” package in Ubuntu: Confirmed Bug description: I have a large directory, almost 50Gb and 45.000 files shared by samba on ubuntu 12.04.1 LTS server. I used to copy the whole directory regularly on my desktop, and execute a backup with deja dup on that. I did also often backup directly from the samba share. After upgrading my client to 12.10, copying the directory hangs randomly, sometimes after having copied just 1 Gb, others having almost completed the whole transfer. It just hangs, without any crash. I noted the also Deja -dup shows the same behaviour, now it's impossible to complete a backup from the share, it just hangs. It seems to me that a bug in the samba client might be the cause of these issues, since neither nautilus nor Deja-dup have problems with local large directories. my system: Ubuntu 12.10 AMD64 nautilus: 1:3.5.90.really.3.4.2-0ubuntu4 deja-dup: deja-dup 24.0-0ubuntu1 smbclient 2:3.6.6-3ubuntu5 samba-common: 2:3.6.6-3ubuntu5 samba-common-bin: 2:3.6.6-3ubuntu5 ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: nautilus 1:3.5.90.really.3.4.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 Date: Wed Nov 7 12:05:58 2012 GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b"'825x550+853+471'" InstallationDate: Installed on 2012-10-22 (16 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1075923/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1074779] Re: llvmpipe used after clean install instead of intel
** Information type changed from Public to Public Security -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1074779 Title: llvmpipe used after clean install instead of intel Status in The Linux Mint Distribution: Confirmed Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: After installing ubuntu 12.10 llvmpipe is loaded instead of intel graphics driver, before in ubuntu 12.04 it was working very well with the intel drivers out of the box. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: xorg 1:7.7+1ubuntu4 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None Date: Sat Nov 3 23:53:55 2012 DistUpgraded: Fresh install DistroCodename: quantal DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 07) (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:5140] NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) (prog-if 00 [VGA controller]) Subsystem: CLEVO/KAPOK Computer Device [1558:5140] InstallationDate: Installed on 2012-11-03 (0 days ago) InstallationMedia: Ubuntu GNOME Remix 12.10 "Quantal Quetzal" - Release amd64(20121018) MachineType: CLEVO CO. W150HNM/W170HN MarkForUpload: True ProcEnviron: LANGUAGE=pt:pt_BR:en TERM=xterm PATH=(custom, no user) LANG=pt_PT.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=9f0065ef-dbaf-4c00-92a1-f4397031fb22 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/07/2011 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: HR_2.1.0.128 X64 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: W150HNM/W170HN dmi.board.vendor: CLEVO CO. dmi.board.version: D03 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: CLEVO CO. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrHR_2.1.0.128X64:bd10/07/2011:svnCLEVOCO.:pnW150HNM/W170HN:pvr0.1:rvnCLEVOCO.:rnW150HNM/W170HN:rvrD03:cvnCLEVOCO.:ct9:cvr0.1: dmi.product.name: W150HNM/W170HN dmi.product.version: 0.1 dmi.sys.vendor: CLEVO CO. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.99.99~git20120913.8637f772-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/linuxmint/+bug/1074779/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04)
Hello, I confirm that the patch works fine on Precise. So, +1 for going to release on Precise Technical details: a 32 bit Precise fresh live usb was confirmed to have the bug with the default Brasero 3.4.1-0ubuntu1 and a DVD RW. After enabling the proposed repository and the update to 3.4.1-0ubuntu1.1, the problem is solved (even without a reboot, on the same DVD, after blanking it with the dvd+rw-format commands). Many thanks to all, Nico -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) Status in A disc burning application for gnome 2: New Status in OEM Priority Project: Fix Released Status in OEM Priority Project precise series: Fix Released Status in “brasero” package in Ubuntu: Fix Released Status in “brasero” source package in Precise: Fix Committed Status in “brasero” source package in Quantal: Fix Released Status in Baltix GNU/Linux: In Progress Status in “brasero” package in Fedora: New Bug description: SRU Justification ~ Impact: Currently Brasero will fail to write files to a disc in on-the-fly mode using the libburnia plugin resulting in 'coastered' media. This is the default mode of operation and unless the user is writing a pre-built ISO image, this fails 100% of the time and has since Oneiric -- possibly Natty. Fix: Complete/fix part of the following commit: http://git.gnome.org/browse/brasero/commit/?id=1b8397ee252df2d554682ca2d694d5937fbf6e39 Particularly the change to plugins/libburnia/burn-libisofs.c around line 200 that hoisted the priv->libburn_src->read_xt() call out of the if() statement should have actually removed it instead of duplicating it. Patch: http://git.gnome.org/browse/brasero/commit/?id=253031b69c5dcbcf079c445ec530afb7ccd9ea82 Test Case: * Insert blank CD or DVD in drive: (1) Attempt to write files to the writable optical disc by dragging files from Nautilus to a blank disc. (2) Click on the 'Write Files to Disc' button in nautilus. (3) Make sure 'on the fly' mode is enabled by selecting 'Burn image directly without saving to disc' (which should be the default). (4) Click on the 'burn' button. * If the bug is fixed, you should have a properly written and readable disc. Otherwise, the procedure will fail and the disc will be unusable. -- Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04)
I do confirm that this proposed patch resolves this nasty bug on quantal. So, from my point of view, this is a big THANK YOU to all the upstream developers and the smart Ubuntu guys!!! Some notes (I always use a fresh standard live 32 bit USB key with the same DVD-RW): - the patch is still not "proposed" on 11.10 and 12.04 (see https://launchpad.net/ubuntu/+source/brasero/), so I cannot rightly test it there - the "unreadable coasters" produced from other Ubuntu versions are seen as blank disk from standard brasero 12.10, and can be easily blanked with it. This is different from old versions of brasero that does not recognise it at all as a DVD medium. - the bug (don't ask me why) is quite different on 12.10. Here sometimes you can have a readable DVD, but never on the first recording! It seems that it's somehow and sometimes able to record a second recording session on what it thinks it's a blank disk. +1 for going to stable on quantal! ** Changed in: brasero (Ubuntu Quantal) Status: Fix Committed => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) Status in A disc burning application for gnome 2: New Status in OEM Priority Project: In Progress Status in OEM Priority Project precise series: In Progress Status in “brasero” package in Ubuntu: In Progress Status in “brasero” source package in Precise: In Progress Status in “brasero” source package in Quantal: Confirmed Status in Baltix GNU/Linux: In Progress Status in “brasero” package in Fedora: New Bug description: SRU Justification ~ Impact: Currently Brasero will fail to write files to a disc in on-the-fly mode using the libburnia plugin resulting in 'coastered' media. This is the default mode of operation and unless the user is writing a pre-built ISO image, this fails 100% of the time and has since Oneiric -- possibly Natty. Fix: Complete/fix part of the following commit: http://git.gnome.org/browse/brasero/commit/?id=1b8397ee252df2d554682ca2d694d5937fbf6e39 Particularly the change to plugins/libburnia/burn-libisofs.c around line 200 that hoisted the priv->libburn_src->read_xt() call out of the if() statement should have actually removed it instead of duplicating it. Patch: http://git.gnome.org/browse/brasero/commit/?id=253031b69c5dcbcf079c445ec530afb7ccd9ea82 Test Case: * Insert blank CD or DVD in drive: (1) Attempt to write files to the writable optical disc by dragging files from Nautilus to a blank disc. (2) Click on the 'Write Files to Disc' button in nautilus. (3) Make sure 'on the fly' mode is enabled by selecting 'Burn image directly without saving to disc' (which should be the default). (4) Click on the 'burn' button. * If the bug is fixed, you should have a properly written and readable disc. Otherwise, the procedure will fail and the disc will be unusable. -- Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type
[Desktop-packages] [Bug 1048193] Re: "Forecast Information Cannot be fetched. Connection cannot be established"
** Also affects: weather-indicator Importance: Undecided Status: New ** No longer affects: weather-indicator -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to indicator-weather in Ubuntu. https://bugs.launchpad.net/bugs/1048193 Title: "Forecast Information Cannot be fetched. Connection cannot be established" Status in “indicator-weather” package in Ubuntu: Fix Committed Bug description: For days the weather bug Forecast button's usefullness has been replaced with this error message "Forecast Information Cannot be fetched. Connection cannot be established" I've tried both the google and Yahoo option and neither works. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: indicator-weather 11.11.28-0ubuntu1.2 ProcVersionSignature: Ubuntu 3.2.0-30.48-generic 3.2.27 Uname: Linux 3.2.0-30-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 Date: Sun Sep 9 07:09:32 2012 ExecutablePath: /usr/bin/indicator-weather InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) InterpreterPath: /usr/bin/python2.7 PackageArchitecture: all SourcePackage: indicator-weather UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-weather/+bug/1048193/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 975227] Re: Gnome-Terminal Launched in KDE Is Resized to Small Window
*** This bug is a duplicate of bug 880734 *** https://bugs.launchpad.net/bugs/880734 ** This bug has been marked a duplicate of bug 880734 gnome-terminal window changes size to one-line in KDE -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/975227 Title: Gnome-Terminal Launched in KDE Is Resized to Small Window Status in “gnome-terminal” package in Ubuntu: Confirmed Bug description: *** This is likely a bug with the way KDE launches gnome-terminal, but I'm unsure what packaged that would be. Also, I'm ignorant whether gnome-* apps should even work under KDE at all... If I launch gnome-terminal in KDE, it is opened at normal size, and right away is resized to a tiny window, 264 x 80px (though final size seems to vary). This is always reproducable on this install and another machine at home (same versions though). ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-terminal 3.4.0.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-22.35-generic 3.2.14 Uname: Linux 3.2.0-22-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0-0ubuntu4 Architecture: amd64 Date: Fri Apr 6 11:05:15 2012 ExecutablePath: /usr/bin/gnome-terminal InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120328) ProcEnviron: LANGUAGE=en_CA:en LANG=en_CA.UTF-8 SHELL=/bin/bash SourcePackage: gnome-terminal UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/975227/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 867806] Re: df -h permission denied error
This bug also affects anyone trying get disk usage statistics using Cacti. The script executed by Cacti is $ perl /usr/share/cacti/site/scripts/query_unix_partitions.pl get available /dev/sda4 which fails with /bin/df: `/var/lib/lightdm/.gvfs': Permission denied --Nico -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/867806 Title: df -h permission denied error Status in Light Display Manager: New Status in “lightdm” package in Ubuntu: Fix Released Bug description: Running "df -h" from the cli as a normal user returns: FilesystemSize Used Avail Use% Mounted on /dev/md0 37G 6.6G 29G 19% / udev 796M 8.0K 796M 1% /dev tmpfs 322M 888K 321M 1% /run none 5.0M 0 5.0M 0% /run/lock none 805M 92K 805M 1% /run/shm /dev/sda3 1.8T 265G 1.6T 15% /mnt/d1 /dev/sdb3 1.8T 1.7T 102G 95% /mnt/d2 /dev/sdc3 893G 33M 893G 1% /mnt/d3 df: `/var/lib/lightdm/.gvfs': Permission denied $ running with "su" $ sudo df -h FilesystemSize Used Avail Use% Mounted on /dev/md0 37G 6.6G 29G 19% / udev 796M 8.0K 796M 1% /dev tmpfs 322M 888K 321M 1% /run none 5.0M 0 5.0M 0% /run/lock none 805M 92K 805M 1% /run/shm /dev/sda3 1.8T 265G 1.6T 15% /mnt/d1 /dev/sdb3 1.8T 1.7T 102G 95% /mnt/d2 /dev/sdc3 893G 33M 893G 1% /mnt/d3 $ ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: bash 4.2-0ubuntu4 ProcVersionSignature: Ubuntu 3.0.0-10.16-server 3.0.4 Uname: Linux 3.0.0-10-server x86_64 ApportVersion: 1.23-0ubuntu2 Architecture: amd64 Date: Tue Oct 4 14:17:28 2011 InstallationMedia: Ubuntu-Server 11.04 "Natty Narwhal" - Release amd64 (20110426) ProcEnviron: SHELL=/bin/bash LANG=en_US.UTF-8 SourcePackage: bash UpgradeStatus: Upgraded to oneiric on 2011-09-05 (29 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/867806/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04)
Hi Ayan, thank you for the support and dedication - I really appreciate it. I've made a couple of tests, on a fresh 12.04 standard 64 bit installation. - a default data burnt DVD is still unreadable. As already pointed out, it is not even anymore possible to change (nor see) the on-the-fly option - after applying your PPA, there is no problem at all So, from my point of view, go on urgently with the patch! Note: for testing, use a DVD-RW. And resurrect it with: sudo dvd+rw-format -force /dev/cdrw sudo dvd+rw-format -lead-out /dev/cdrw Thank you again, Nico -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) Status in A disc burning application for gnome 2: New Status in OEM Priority Project: Triaged Status in OEM Priority Project precise series: Triaged Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04)
I also think it's better to disable on-the-fly burns on Brasero until this is fixed... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) Status in A disc burning application for gnome 2: New Status in OEM Priority Project: Triaged Status in OEM Priority Project precise series: Triaged Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 804662] Re: jockey-gtk crashed with TypeError in _execute_child(): execv() arg 2 must contain only strings
Crahed while I tried to install the post-release drivers for a HD 4850 1GB GPU, using Ubuntu 12.04 Beta 2 x64. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to jockey in Ubuntu. https://bugs.launchpad.net/bugs/804662 Title: jockey-gtk crashed with TypeError in _execute_child(): execv() arg 2 must contain only strings Status in “jockey” package in Ubuntu: Confirmed Bug description: just came up during ATI driver installation ProblemType: Crash DistroRelease: Ubuntu 11.10 Package: jockey-gtk 0.9.2-0ubuntu7 ProcVersionSignature: Ubuntu 3.0-2.3-generic-pae 3.0.0-rc4 Uname: Linux 3.0-2-generic-pae i686 NonfreeKernelModules: fglrx Architecture: i386 Date: Sat Jul 2 04:31:30 2011 ExecutablePath: /usr/bin/jockey-gtk InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Alpha i386 (20110701) InterpreterPath: /usr/bin/python2.7 MachineType: System manufacturer System Product Name PackageArchitecture: all ProcCmdline: /usr/bin/python /usr/bin/jockey-gtk ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0-2-generic-pae root=UUID=69fb0a75-ad30-41d2-a270-fa5b2ac7d56d ro quiet splash vt.handoff=7 PythonArgs: ['/usr/bin/jockey-gtk'] SourcePackage: jockey Title: jockey-gtk crashed with TypeError in _execute_child(): execv() arg 2 must contain only strings UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 04/14/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0906 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: M4A785-M dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0906:bd04/14/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A785-M:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/jockey/+bug/804662/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04)
YES, I do confirm both solutions: - the bring-again-to-life commands for RW disks of Tom Jaeger (thjaeger) on https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/780117/comments/17 - the libisofs low priority fix of Cyrus Lien (cyruslien) I've tested both on an fresh USB Live of Ubuntu 11.10. Do you think this should be applied as a fix? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) Status in A disc burning application for gnome 2: New Status in OEM Priority Project: Triaged Status in OEM Priority Project precise series: Triaged Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04)
** Summary changed: - Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10) + Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04 ->12.04) Status in A disc burning application for gnome 2: New Status in OEM Priority Project: New Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10)
2012/2/15 Ayan George : > ** Changed in: brasero (Ubuntu) > Assignee: (unassigned) => Ayan George (ayan) > Hi Ayan, thank you for your support! I've written to you in order to let you know of other tests I've done following some hints from Luis Medinas . I'm writing the results down here - I hope they're useful. Best regards, and let me know if I can help you somehow, Nico ** On my updated Ubuntu 11.10 32 bit: 1) In dconf-editor I've changed: apps - brasero -plugin growisofs priority to 50 (before it was 0) wodim priority to -50 (before it was 0) -->> same problem of unreadable DVD without any error from the program. 2) setting growisofs priority to -50 wodim priority to 50 gives a visual error around 60% of the process : stderr: wodim: Cannot fixate disk. > Even with growisofs there's some setup that might solve your problem... > check on dconf-editor -> org -> gnome ->brasero -> config -> dao_flag > > also you have other options here that might help you solve the problem > 3) I've tried to set all the flags there: dao-flag + immed-flag + raw-flag -->> same problem of unreadable DVD without any error from the program. > I suggest you to try cdrecord not wodim (cdrkit) which comes installed > by default on Ubuntu. 4) This is not so clear to me... I had a look in the Software Center but I cannot find anything ready to install. Googling around I've found that in a PPA: sudo add-apt-repository ppa:ferramroberto/cdrtools sudo apt-get update sudo apt-get install cdrecord cdda2wav mkisofs + reboot The installed cdrecord is now 3.0.0. I cannot find any cdrecord entry in dconf-editor. I tried with the normal settings, but: -->> same problem of unreadable DVD without any error from the program. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10) Status in A disc burning application for gnome 2: New Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10)
As I've written on the Brasero bug (https://bugzilla.gnome.org/show_bug.cgi?id=655601) it clearly started with Ubuntu 11.04 and it's still here on 11.10, and even with Fedora 16. I hope someone will have a look, because it happens to everyone using default settings! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10) Status in A disc burning application for gnome 2: New Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10)
** Summary changed: - Brasero finishes without error but unusable media [no simulation mode] (Ubuntu 11.04) + Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [on-the-fly mode] (Ubuntu 11.04-11.10) Status in A disc burning application for gnome 2: New Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 780117] Re: Brasero finishes without error but unusable media [no simulation mode] (Ubuntu 11.04)
** Also affects: brasero (Fedora) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/780117 Title: Brasero finishes without error but unusable media [no simulation mode] (Ubuntu 11.04) Status in A disc burning application for gnome 2: New Status in “brasero” package in Ubuntu: Triaged Status in Baltix GNU/Linux: New Status in “brasero” package in Fedora: New Bug description: Binary package hint: brasero When I burn a DVD (4,7 and 8,5 GB) Brasero show the progressbar till about 30-40% (exact point is randomly) and than says, that it is finalizing the media. This finalizing messages is showing for the rest of the burning process (~10min @8x 8,5GB). After that, it ejects the media without any error. But when I insert the media again, nothing happens, except, that the DVD-Drive disappears from the "computer:///" location in nautilus. This problem only exists when burning On-The-Fly. Burning ISO Images or automatic creation of ISO Images before burning works without problems. The burning speed doesn't matter to this problem. I test 8x, 4x and 2x. All the same problem. On-The-Fly burning using K3B works quite well @8x speed. One thing I also notice is, that Brasero uses 100% CPU on one core, while K3B uses just about 5-15%. I attached the last Brasero log. I don't know, why it just says, that it was only at 49% and then says it's finished. The burning took about 28 minutes. The media was unusable on all my three devices (Linux/Windows). ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Mon May 9 22:10:24 2011 ExecutablePath: /usr/bin/brasero InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) ProcEnviron: LANGUAGE=de_DE:en LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) XsessionErrors: (brasero:2453): GLib-CRITICAL **: the GVariant format string `(u)' has a type of `(u)' but the given value has a type of `()' (brasero:2453): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value)' failed (:4557): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/780117/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 867570] Re: direct burning of data-cd results in unreadable disk
*** This bug is a duplicate of bug 780117 *** https://bugs.launchpad.net/bugs/780117 ** This bug has been marked a duplicate of bug 780117 Brasero finishes without error but unusable media [no simulation mode] (Ubuntu 11.04) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/867570 Title: direct burning of data-cd results in unreadable disk Status in “brasero” package in Ubuntu: Confirmed Bug description: If you burn a data-cd and choose the first option, "burn directly, do not save on hard disk", (I don't know how it is labeled in English, my GUI is German) brasero will burn and tell that it did successfully, but the disk is unreadable. If you disable and burn with first creating an image, the disk is okay. I tried it with audio-cd, it is not affected. Appeared on two laptops, mine being a Toshiba C650D and my girlfriend's being a Packard Bell TK85. Workaround worked on both laptops. Please test on other systems to confirm! Trying to read disk: /var/log/syslog remains quiet if you wait for automount. Trying "mount -t iso9660 /dev/dvd /media/test" results in error-message: ISOFS: Unable to identify CD-ROM format. Trying "mount -t iso9660 -o loop /dev/dvd /media/test" results in longer message: Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494266] sr 1:0:0:0: [sr0] Unhandled sense code Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494272] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494277] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494283] sr 1:0:0:0: [sr0] Add. Sense: Unrecovered read error Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494289] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 bb 1e 00 00 01 00 Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494299] end_request: I/O error, dev sr0, sector 453752 Oct 4 16:45:12 isk-Satellite-C650D kernel: [18210.494306] Buffer I/O error on device sr0, logical block 113438 Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607798] sr 1:0:0:0: [sr0] Unhandled sense code Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607809] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607818] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607827] sr 1:0:0:0: [sr0] Add. Sense: Unrecovered read error Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607837] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 bb 1e 00 00 01 00 Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607855] end_request: I/O error, dev sr0, sector 453752 Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607866] Buffer I/O error on device sr0, logical block 113438 Oct 4 16:45:14 isk-Satellite-C650D kernel: [18211.607930] Buffer I/O error on device loop0, logical block 226876 Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721635] sr 1:0:0:0: [sr0] Unhandled sense code Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721641] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721645] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721650] sr 1:0:0:0: [sr0] Add. Sense: Unrecovered read error Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721655] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 bb 1e 00 00 01 00 Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721663] end_request: I/O error, dev sr0, sector 453752 Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721670] Buffer I/O error on device sr0, logical block 113438 Oct 4 16:45:15 isk-Satellite-C650D kernel: [18212.721717] Buffer I/O error on device loop0, logical block 226877 Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835885] sr 1:0:0:0: [sr0] Unhandled sense code Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835890] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835894] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835898] sr 1:0:0:0: [sr0] Add. Sense: Unrecovered read error Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835905] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 01 bb 1e 00 00 01 00 Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835912] end_request: I/O error, dev sr0, sector 453752 Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835917] Buffer I/O error on device sr0, logical block 113438 Oct 4 16:45:16 isk-Satellite-C650D kernel: [18213.835979] Buffer I/O error on device loop0, logical block 226876 Oct 4 16:45:17
[Desktop-packages] [Bug 774203] Re: Brasero makes coasters when using the Burn Directly To Disk option
*** This bug is a duplicate of bug 780117 *** https://bugs.launchpad.net/bugs/780117 ** This bug has been marked a duplicate of bug 780117 Brasero finishes without error but unusable media [no simulation mode] (Ubuntu 11.04) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/774203 Title: Brasero makes coasters when using the Burn Directly To Disk option Status in A disc burning application for gnome 2: New Status in “brasero” package in Ubuntu: Triaged Bug description: Binary package hint: brasero If I try creating a CD by adding files in Brasero then buring directly to disk (using defaults all the way through) brasero creates coasters every time. If I add files, then build an ISO, then burn the ISO instead, Brasero seems to work fine. but so far, I've tried 5 times on three different machines and each time, Brasero made a nice plastic coaster instead of a usable CD or DVD. When I use an ISO image instead, Brasero successfully burns a useful disk ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: brasero 2.32.1-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 Architecture: i386 Date: Sat Apr 30 11:21:39 2011 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: brasero UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/brasero/+bug/774203/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 854940] Re: Brasero burns unreadable data discs
*** This bug is a duplicate of bug 780117 *** https://bugs.launchpad.net/bugs/780117 ** This bug has been marked a duplicate of bug 780117 Brasero finishes without error but unusable media [no simulation mode] (Ubuntu 11.04) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to brasero in Ubuntu. https://bugs.launchpad.net/bugs/854940 Title: Brasero burns unreadable data discs Status in “brasero” package in Ubuntu: New Bug description: I was trying to burn some data DVDs containing pictures from my camera. Never had problems with Brasero before; this is the first attempt to burn discs in Oneiric, Brasero 3.1.90. First tried with default settings. The burn completed, then I re-inserted the disc to see if everything is ok and it can be read. Unfortunately, nothing happened, it was not mounted automatically. I even tried to mount the cdrom via the terminal, but had no success. The second time I tried with all the plugins disabled. The same result, so I had to fallback to installing and using K3b for the job. Don't know if it matters or not, but my burner supports Lightscribe, and the disc was lightscribe. Here's some system info: doru@doru-laptop:~$ lsb_release -rd Description: Ubuntu oneiric (development branch) Release: 11.10 doru@doru-laptop:~$ apt-cache policy brasero brasero: Installed: 3.1.90-0ubuntu1 Candidate: 3.1.90-0ubuntu1 Version table: *** 3.1.90-0ubuntu1 0 500 http://archive.ubuntu.com/ubuntu/ oneiric/main amd64 Packages 100 /var/lib/dpkg/status doru@doru-laptop:~$ lshw [...] *-ide description: IDE interface product: 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller vendor: Intel Corporation physical id: 1f.1 bus info: pci@:00:1f.1 logical name: scsi0 version: 03 width: 32 bits clock: 33MHz capabilities: ide bus_master emulated configuration: driver=ata_piix latency=0 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:50c0(size=16) *-cdrom description: DVD-RAM writer product: DVDRAM GSA-T20L vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: NC08 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc [...] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/854940/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 875070] Re: gnome terminal intercepts my alt key combinations when it shouldn't
A workaround is described on http://askubuntu.com/questions/66371/gnome- terminal-keeps-the-menubar-even-when-the-profile-is-configured-to-hide- it -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/875070 Title: gnome terminal intercepts my alt key combinations when it shouldn't Status in “gnome-terminal” package in Ubuntu: Confirmed Bug description: If I'm logged in to the "Gnome classic" interface then the "Show menubar" option is not respected and my alt key combinations get intercepted. If I'm logged in to the Ubuntu interface then you can't turn off the menubar and my alt key combinations are always intercepted. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: gnome-terminal 3.0.1-0ubuntu3 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic-pae 3.0.4 Uname: Linux 3.0.0-12-generic-pae i686 ApportVersion: 1.23-0ubuntu3 Architecture: i386 Date: Sat Oct 15 10:49:38 2011 ExecutablePath: /usr/bin/gnome-terminal InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-terminal UpgradeStatus: Upgraded to oneiric on 2011-10-14 (1 days ago) XsessionErrors: (gnome-settings-daemon:2132): GLib-CRITICAL **: g_variant_new_string: assertion `string != NULL' failed (gnome-panel:2150): Gtk-CRITICAL **: gtk_orientable_get_orientation: assertion `GTK_IS_ORIENTABLE (orientable)' failed (gnome-panel:2150): Gtk-CRITICAL **: gtk_orientable_get_orientation: assertion `GTK_IS_ORIENTABLE (orientable)' failed (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/875070/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp