Re: Howto send ott files
No, MCC/MNC are for operator logo only. But picture messages are concatenated, so you might want to check how they were split/assembled. - Original Message - From: Ritesh Shah [EMAIL PROTECTED] To: Dziugas Baltrunas [EMAIL PROTECTED] Cc: Kannel [EMAIL PROTECTED] Sent: Wednesday, November 27, 2002 2:39 PM Subject: Re: Howto send ott files Hi, I am using nokia 3310. Pls. correct me do I have to send the MCC and MNC for picture msg. also. Regards Ritesh - Original Message - From: Dziugas Baltrunas [EMAIL PROTECTED] To: Ritesh Shah [EMAIL PROTECTED] Cc: Kannel [EMAIL PROTECTED] Sent: Wednesday, November 27, 2002 6:57 PM Subject: Re: Howto send ott files Hello, what model of Nokia are you using? actually, i have the same problem - nokia 5110 shows the picutre correctly, but others don't. and are you using correct code of your mobile phone operator? Dziugas On Wed, 27 Nov 2002, Ritesh Shah wrote: Hi All, I am having two problems. (1.) Howto send ott files through kannel (2.) I am able to send hexadecimal codes of logos and ringtones but when I am sending picture msg. I am getting message not displayed here. I am sending the pic msg. like this, Pls. let me know where I am doing wrong. /cgi-bin/sendsms?username=userpassword=passfrom=fromnoto=mobilenoudh=%06 %05%04%15%8A%00%00text=%00%48%1C%01%00%00%00%00%03%F0%00%36%66%00%00%00%00% 03%18%00%30%CC%00%00%00%00%03%18%00%30%CC%00%00%0C%00%03%18%F1%F6%EE%00%00%E F%80%03%F1%9B%36%CC%00%07%3B%60%03%19%FB%36%CC%00%08%F9%90%03%19%83%36%CC%00 %10%EA%88%03%19%9B%36%CC%00%27%CA%74%03%18%F1%F6%CC%00%23%8E%E7%00%00%00%00% 00%00%33%84%CC%80%01%F0%00%00%01%79%C7%98%20%00%D8%0C%00%0F%3C%7E%3E%30%00%D 9%DE%00%3F%07%1C%F8%60%00%DB%6C%00%7F%8F%CF%F1%E0%00%DB%6C%00%E3%F3%F7%3F%F0 %01%F1%C6%00%0E%F0%7D%8F%F8%00%00%00%00%1F%F8%D8%1F%FC%00%00%00%00%0F%FF%8C% 27%FC%3E%00%00%00%1F%FD%FF%F0%CE%63%00%00%00%3F%F9%FF%F0%22%60%00%00%00%7F%F 3%BF%F0%00%60%3C%FE%00%07%C4%7F%E0%00%60%66%DB%00%00%00%7F%C0%00%60%66%DB%00 %00%00%3F%00%00%60%66%DB%00%00%00%3D%00%00%63%66%DB%00%00%00%18%00%00%3E%3C% DB%00%00%00%08%00%00%00%00%00%00 Regards Ritesh
Re: Looking for deveopers..
I wonder what would be the customer : developer exchange ratio ? *lol* :) - Original Message - From: Andrea Viscovich [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, May 02, 2002 6:24 PM Subject: Re: Looking for deveopers.. Hehe, since you ppl already asked I can say the same.. We need kanneldevelopers mucho... =) Well, we need... customers :-) We can even exchange developers for customes :-)) Andrea
Re: New Stable release
As regarding to SIM buffering patches : I don't think these are to be included in any type of stable version, and there's a very simple and clear reason. Sim card has flash memory where it stores those messages if they are not requested to be output to the prompt by terminal. Every flash memory card has it's life circle , which is pretty short comparing to count of messages one would want to receive/send with it in production environment. Let's say normal Sim will not live if you save to it over 10.000 - 50.000 sms. While 10.000 seems to be a huge number, it is not actually that big, and in production environments I personally saw a sim card which received over 100.000 sms. This would not be possible if it would be over the Sim buffering technics, the card would simply go screwed. So far, I suppose this buffering conception is for risky people only, and we definately would not want to include in stable release something that could damage user's hardware. - Original Message - From: Stipe Tolj [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Monday, February 25, 2002 5:19 AM Subject: Re: New Stable release Oded Arbel wrote: I'm not absolutly sure we don't need AT anymore, but I think it would probably be a good idea. if we need something that only AT does (nothing AFAIK) we can always grab it from the CVS. what about the SIM buffering patches - do you think these should be merged in the old/new AT module ? I haven't reviewed them and I'm out of time scope until next Sunday. If anyone other can suggest in merging the patch in please take your heads up on the list and present your review results and tell us how far you have tested it. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: Webmin Module
you mean this one ? http://www.webmin.com/webmin/modules.html - Original Message - From: Bjoern Buettner [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, February 25, 2002 8:57 AM Subject: Webmin Module Hi all, has anybody the new URL of Philippe Barnetche's Webmin module Page? Or has anybody the mod.? This site is not available (http://www.agisphere.com/~barnetch/webkannel.html) I want to have a look @ the module. Thanx Bjoern kind regards Vodafone TeleCommerce GmbH Architecture Engineering Bjoern Buettner Daniel Goldbach Str. 17-19 40880 Ratingen Tel. +49 (0) 21 02 / 97 20 13 Fax +49 (0) 21 02 / 97 15 14 mailto:[EMAIL PROTECTED] www.vodafone.com www.vodafone-telecommerce.de
Re: SMSC support SL45i and T68
You mean you could not RECEIVE the sms with those devices ? I guess no sms was actually sent than. Kannel sends pretty standard sms packet, so if your device usually gets any sms messages, should be no problem to get one from kannel. As regarding to driver support for those phones, I am not sure it is in kannel already, but since both devices have AT modem internal and could be connected with serial cable, fitting current AT to support them should not be a problem. - Original Message - From: Stone Zhang [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, February 25, 2002 10:04 AM Subject: SMSC support SL45i and T68 hi, Just wonders does Kannel SMSC support SL45 and T68? I tried to send SMS via Nokia Premicell to SL45 and T68, but both failed. Cheers Stone NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
Re: SMPP causing smsbox to crash?
Well, I was just analizing the SMPP protocol and checking the speed. Trust me, Kannel supports SMPP v 3.3 very well, I guess better than Sim runs the emulations even :) Afaik The SMPPSim does save the messages in some log file, and u can parse it if you need those .. I was running Kannel as SMPP Entity for around a year in production environment, and it was pretty stable, and very fast. - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 22, 2002 3:59 PM Subject: Re: SMPP causing smsbox to crash? I set up smppsim, and im just trying to test that kannel works with SMPP. I grabbed SMPPSim and I just want to verify that sending to smppsim works, and having smppsim send back works. (smppsim is also not storing the messages it recieved in its log file either) What configuration were you using w/ smppsim and what were you trying to accomplish? What is it exactly that you are trying to do so far ? :) I have used the Kannel with SMPPSim, and it was working quite fine for me .. - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 22, 2002 3:00 PM Subject: SMPP causing smsbox to crash? Hey guys, I've set up SMPPSim, and ive created the proper entries in my kannel.conf to use it as an smsc to connect to, and all is well. it connects and the whole 9 yards. When i send a message to it, it accepts it, and loops it back to kannel. So far we're okay. When kannel GETS this message looped back to itself, it freaks out and crashes. I sent the original message (to the smsc) with From=12345 To=16047289785 Text=haha Here is the log output from smsbox from the point of getting the message back, and dying. (I am using cvs from 2 days ago) 2002-02-22 11:54:07 [4] WARNING: No translation found for haha from 12345 to 16047289785 2002-02-22 11:54:07 [4] ERROR: request failed 2002-02-22 11:54:07 [4] DEBUG: message length 14, sending 1 messages 2002-02-22 11:54:08 [4] WARNING: No translation found for Request Failed from 16047289785 to 12345 2002-02-22 11:54:08 [4] ERROR: request failed 2002-02-22 11:54:08 [4] ERROR: Start marker was damaged for area 0x81bcd60 2002-02-22 11:54:08 [4] ERROR: Could not find area information. 2002-02-22 11:54:08 [4] PANIC: gwlib/octstr.c:2056: seems_valid_real: Assertion `gw_check_is_allocated(ostr)' failed. (Called from gwlib/octstr.c:252:octstr_len Any help?
Re: picture mess
Hi, try to analize the SMPP packet dump. Edit gw/smsc_smpp.c, enable debug, and see what it sends, you might send me if you want me to takea look on it. Than send message concatenated manually and see the difference. I had some scripts to manually concatenate messages, might be sharing with you if you want. - Original Message - From: P. A. Bagyenda [EMAIL PROTECTED] To: Valter Santos [EMAIL PROTECTED] Cc: Peter Löfman [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, February 21, 2002 6:56 AM Subject: Re: picture mess Hi, I'm not sure that that solves the problem. Even with the current snapshot, any attempt at setting concatenation=true (using SMPP code), causes the phone to receive junk. And you need this to be able to send operator logos. Using the snapshot of 16th, with concatenation = true (SMPP, Comverse SMSC) doesn't seem to work for text or data. Any ideas anybody? P. Valter Santos wrote: Hi there! I'm trying to send a nokia picture message, but I believe that I have something wrong. This is how it looks: udh=%06%05%04%15%82%00%00text=%00%48%1c%01%1d%c9%82%62%61%c8% . the udh that you are using is to send operator logos... for normal picutes you should use udh=%06%05%04%15%8A%00%00 Anyway, if you still wanna to send logos you should include MCC/MNC information before the text message. You can see this information for your operator in http://users.zipworld.com.au/~rmills/MCCandMNCValues.htm hope this help /valter - Original Message - From: Peter Löfman [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, February 19, 2002 10:05 AM Subject: picture mess Hi, I'm trying to send a nokia picture message, but I believe that I have something wrong. This is how it looks: udh=%06%05%04%15%82%00%00text=%00%48%1c%01%1d%c9%82%62%61%c8% . is the udh incorrect? Does anyone have an example of a working picture? /Peter Lofman
Re: concatenation = true
This is VERY smsc module dependant. - Original Message - From: Angel Fradejas [EMAIL PROTECTED] To: Stipe Tolj [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; P. A. Bagyenda [EMAIL PROTECTED] Sent: Thursday, February 21, 2002 11:20 AM Subject: RE: concatenation = true Concatenated messages works for me, using current CVS. Never had a problem with that. Angel. -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]En nombre de Stipe Tolj Enviado el: jueves 21 de febrero de 2002 20:19 CC: [EMAIL PROTECTED]; P. A. Bagyenda Asunto: Re: concatenation = true P. A. Bagyenda wrote: I'm still trying to figure out what's going wrong with the concatenation = true. It doesn't work for text or binary, for the current snapshot. I notice two interesting things: in access.log there is dump of each message sent out, plus udh header. However I note that in each case, the reported length is one greater than should be. For instance for the udh it reports a length of 6, the message a length of 153. Is this part of the problem? concatenated messages used to work?! Can you re-post the things you are seeing as mis-behaviour in a new mail with attached logs, so the developers could see. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: Optional parameters in smpp pdu's?
Well, according to sema spec's , it only supports Sema2000 protocol, which is implemented in OIS module, and you use SMPP. Afaik, your operator has written some propriatory translator for SMPP protocol, or has made changes to the original smsc. Kannel SMPP module supports only the standard SMPP functionality, thus if you need anything beyond, you will have to make it yourself. Should not be too much difficult if you know the exact structure of packets you get and have them documented. I suggest you adding the new packets support and probably new functions for treating those packets in a new kannel module, call it smpp-[your-operator-name] and try adjusting. If there will be more than one user for this module, it might be included in Kannel mainstream. Those are my 2 cents .. - Original Message - From: Wartan Hachaturow [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, February 21, 2002 12:36 PM Subject: Re: Optional parameters in smpp pdu's? On Thu, Feb 21, 2002 at 10:33:33AM -, Ronan Derby wrote: Are you connecting to a SEMA SMSC? Hmm. No idea, to be honest :) I've been just said it supports SMPP v3.4. But I'll ask. If so, I would suggest trying to set the SMPP version to 0x33 (SMPP v3.3) in smsc_smpp.c and rebuilding Kannel. That didn't helped, unfortunately :( The SMPP spec is a little vague about the use of the message payload functionality, it says to use it for messages over a certain length, but it doesn't say that it can't be used for smaller messages. The SEMA SMSC uses it for all messages (I think). Yeah, my smsc also use it for all messages (even those that are 160 octets). So the problem is still in question: are there any patches for optional smpp parameters support (e.g., message payloading, for example)? If not, will you be interested in adding such a support, and, maybe, give me some recommendations? (I have to write the patch this weekend, so it should be out shortly :). -- Regards, Wartan. echo Your stdio isn't very std. -- Larry Wall in Configure from the perl distribution
Re: loadable modules ?
I think idea of having the listening http interface inside bearerbox instead of running two executables could be usefull too. Obviously this should be configurable .. - Original Message - From: Nisan Bloch [EMAIL PROTECTED] To: Stipe Tolj [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Thursday, February 21, 2002 1:08 PM Subject: Re: loadable modules ? At 08:09 PM 2/21/02 +0100, Stipe Tolj wrote: Oded Arbel wrote: yep, that brings us to 2 API architectures we should think about: 1) module API to load-on-the-fly smsc modules (smpp, emi2, at2, etc.) 2) module API to load-on-the-fly sms-services (so that there is no need to SIGHUP smsbox for processing) it might also be worth looking at splitting smsbox: 1. interface - at moment HTTP 2. processing bearerbox connections. this way we would have an smsbox api and could bolt other frontends onto it. eg our applications or even something like SMPP. nisan Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: I don't want to run bearerbox as root
Stipe, what other languages do you speak ? Did St.Valentine's day impressed you that much ? Lol :) - Original Message - From: Stipe Tolj [EMAIL PROTECTED] To: Miroslav Vrankic [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, February 15, 2002 9:02 AM Subject: Re: I don't want to run bearerbox as root Miroslav Vrankic wrote: We are using Kannel 0.10.3. ajme meni, zar koristite taku statu verziu :)) -- najbolje uzmite trenutno CVS stablo, koje je najbolje sta se tice stabiliteta. (some croatian for those who are interested :) Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: EMS and splitting
I think as the kannel target is to stay as simple as possible, all the functionality for advanced sms services (EMS, SMART-SMS, WAP PUSH etc) should be implemented externally, so that kannel would not deal with things custom applications take care about, besides it gives more freedom for application developers. The only thing usefull indeed could be sharing the example code for such functionality. In my opinion, best way to achive kannel compatibility with udh-containing messages is to continue development of php scripts, as it was started long time ago, but depricated now. I can personally take care of this part, if there're enough interested developers. At the moment I have written scripts to support Nokia and Siemens gfx/ringtones implementations. As another usefull functionality there's a way to implement mySQL+PHP based retry mechanism for kannel, since currently Kannel does not deal with failed messages out of the box. Alexei. I'm working on an application that uses EMS to send graphic elements in messages. It's almost done, but I've came up with a problem with large messages that needs splitting: smsbox fails to do the work, it exists with a failed assertion. If the message fits in a single sms, everything is fine. Of course I have a workaround for this: my application takes care of correctly splitting the message into fragments, then send the fragments individually through Kannel. But I'm interested in contributing to Kannel a patch to do the required splitting for EMS correctly. Anyone with EMS knowlegde has any ideas or advise on how to acomplish this? I mean, currently Kannel duplicates the UDH part of a large SMS into all the fragments after splitting. That's not the case win EMS, we'll have to avoid that under certain scenarios,and maintain it for others (Nokia NBS headers for example). So, traversing the UDH and treating each of the IE's separately, based on known IEI's, could be a solution.Anyone with a more elegant idea? Of course, is there any interest in doing EMS stuff inside kannel? (I mean only proper splitting, not message composition). Angel Fradejas.
Re: A question about PDU encoding in smsc_at2
(for example - the square brackets which I like to use), the modem rejects the message with error 304 invalid PDU mode parameter. Well, this will probably hurt you, but I'm afraid square brackets are not part of GSM character set. At least I didn't see them there.
Re: SMS protocol supported by Kannel
Kannel works with Sema SMS2000 G6.0 over X.25 with Cisco routers to enable TCP-X.25 translation just fine. If you have specs on G7.4 protocol, please public them, or show me where to drop a glance, and I will tell you if it will support it and if not, how many afforts are required to make it support it. - Original Message - From: Olivier Monreal To: [EMAIL PROTECTED] Sent: Tuesday, December 11, 2001 6:31 PM Subject: SMS protocol supported by Kannel Hi All, Could someone one tell me if Kannel support the following protocol SEMA SMS2000 (G7.4) OIS 5.5rev1 over X.25 And if not, what are the differences with SEMA SMS2000 (G6.0) OIS 5.0 over X.25 that I think is supported by Kannel. Thank you for your answers. Olivier Bewoopi.com
Re: smsbox eating CPU ?
Hi all, some off-topic question. I have a cisco router for X.25-TCP/IP translation. Every time it connects to the SMSC, in telnet session router says Trying 2...Open How do I disable these ? Thanks.
Re: convertors
A good point. Will do that. - Original Message - From: Stipe Tolj [EMAIL PROTECTED] To: Alexei Pashkovsky [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Tuesday, November 20, 2001 5:46 PM Subject: Re: convertors oh, the midi2rtttl is compiled under linux, and will not run on other systems. Tested with Redhat 6.x/7.x and Mandrake 7.x/8.x and works fine. why not adding the source to the cvs tree and integrating it to kannel, so we can compile and use if on any platform? Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: php-admin/send*.php
MCC/MNC codes are mobile country and network
operator codes.
The submitting script I use for my scripts looks
smth like this :
table
form method=post action="http://localhost/MT.php3"
trtd bgcolor=fefefeId:/td
td colspan=2input size=60 name=id
value=0001/td/tr
trtd bgcolor=fefefeTo:/td
td colspan=2input size=60 name=to
value=1234/td/tr
trtd
bgcolor=fefefeValidity:/td td colspan=2input size=60
name=validity value=10/td/tr
trtd
bgcolor=fefefeType:/tdtd colspan=2select
name=type
OPTION VALUE=text
SELECTEDtextOPTION VALUE=operatorOperator LogoOPTION
VALUE=groupGroup LogoOPTION VALUE=ringtoneRing
ToneOPTION VALUE=picturePictureOPTION VALUE=cleanRestore
logoOPTION VALUE=vcardvCardOPTION
VALUE=vcalendarvCalendar/SELECT/td/tr
trtd bgcolor=fefefeData:/td
td colspan=2textarea cols="60" name="text" rows=4
wrap=virtual/textarea/td/tr
trtdMCC/td
tdinput size=3 name=mcc
value=234/tdtrtdMNC/td
tdinput size=3 name=mnc
value=15/tdtrtdRouteTo/td
tdinput size=7 name=RouteTo
value=kstream0/tdtdinput type=submit
value="Send"/td/tr
/form
/table
in the above, mcc/mnc are set for Vodafone
UK.
- Original Message -----
From:
Steve Rapaport
To: Alexei Pashkovsky
Sent: Tuesday, November 20, 2001 3:27
PM
Subject: RE: php-admin/send*.php
Thanks, Alexei!
I
didn't see any operator codes included in the
pictures/group/logos.
Or
did you hardcode those? I know that part had me
stumped
for
a couple of days.
-steve
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Alexei
PashkovskySent: Monday, November 19, 2001 10:12 AMTo:
[EMAIL PROTECTED]Cc: [EMAIL PROTECTED]Subject:
Re: php-admin/send*.php
Ok.
Just a few cuts from my scripts
(php):
To encode mnc/mcc from usual
values:
$code.=substr($mcc,1,1);$code.=substr($mcc,0,1);$code.="F";$code.=substr($mcc,2,1);$code.=substr($mnc,1,1);$code.=substr($mnc,0,1);
Now the binary data codings :
function symbolize($input){
/*this gets a hex string and puts "%" after every second
char*/ $len = strlen($input);
$i=0; for
($j=0;$j$len;$j=$j+2){
$char .= "%" ; $char .=
substr($input, $j, 1); $char
.= substr($input, $j+1, 1); }
return ($char);}
function http_send($URL,$port){$connection =
fsockopen(BEARERBOX_HOST,$port,$error_number,$error_description,60);if(!$connection)
{// echo "p$error_description
($error_number)br\n";// echo "The SMS message was NOT
sent!/p\n";} else { fputs($connection, "GET $URL
HTTP/1.0\r\n\r\n"); while (!feof($connection)) {
$myline = fgets($connection, 128);
switch($myline) { case
(strstr($myline, 'Content-')): break; case
(strstr($myline, 'HTTP/1')): break; case "":
break; case "\r\n":
break; default: echo "\n";
} } fclose ($connection);
}}
switch ($type)
{
case "text":
$udh="";
break; case
"clean":
$udh="udh=".symbolize("0605041582");
$text="01";
break; case
"operator":
$udh="udh=".symbolize("0605041582");
$text=$code."00480E01".$text;
break; case
"group":
$udh="udh=".symbolize("0605041583");
$text="00480E01".$text;
break; case
"profile":
$len=strlen($text);
$count=ceil($len/257); for ($i
= 1; $i = $count; $i++)
{ $temp =
substr($text,256*($i-1),256*$i);
$data="symbolize($temp);<BR">
$udh="udh=";
$temp="0B0504158A0003010".$count."0".$i;
$udh.=symbolize($temp);
$URL="/cgi-bin/sendsms?username=".USERNAME."smsc=$smscpassword=".PASSWORD."to=$to$udhtext=$data";
$URL.="from=A38700validity=$validitypriority=$priorityapp_id=$sql_id";
http_send($URL,$port);
}
exit; break;
case
"ringtone":
$len=strlen($text);
$count=ceil($len/257); for ($i
= 1; $i = $count; $i++)
{
$temp =
substr($text,256*($i-1),256*$i);
$data="symbolize($temp);<BR">
$udh="udh=";
$temp="0B050415810003AA0".$count."0".$i;
$udh.=symbolize($temp);
$URL="/cgi-bin/sendsms?username=".USERNAME."smsc=$smscpassword=".PASSWORD."to=$to$udhtext=$data";
$URL.="from=A38700validity=$validitypriority=$priorityapp_id=$sql_id";
http_send($URL,$port);
} exit;
break;
case "picture":
$len=strlen($text);
$count=ceil($len/257); for
convertors
Hi list, for those who need nokia smart-messaging format convertors, here's one I made some time ago. You need to put these files somewhere in your apache htdocs and change path in convertor.php3 file. index.php should be a ln -s to convertor.php3. run chmod a+rw [convertor directory] so it will be able to write temp files there. thats all. oh, the midi2rtttl is compiled under linux, and will not run on other systems. Tested with Redhat 6.x/7.x and Mandrake 7.x/8.x and works fine. I am working on a new much improved convertor, supporting ems and other things, if someone is willing to help, contact me. Thanks. convert.tgz Description: application/compressed
Re: At modules
All of our devices are Siemens M20T firmware 5.4 Regarding the speed : the measurement was altered since kannel counted same message many times while it could not delete it from sim. don't hurry with the update, I already found some minor bugs. There's one strange thing when new AT cannot delete a mesage from SIM, it reads it again and again. The position cursor is mismatched. Log : 2001-11-13 19:14:57 [21] DEBUG: AT: Command: AT+CMGD=12001-11-13 19:14:57 [21] DEBUG: Read from modem: '+CMS ERROR: 321'2001-11-13 19:14:57 [21] DEBUG: deleteing index at mem index : 1 Ah - are you using a Siemens M20T with firmware revision 4.2 or earlier ? If so, then I think this is a geniune bug in the firmware. I have a note from Siemens saying that error 321 when attempting to delete a message from the SIM is a confirmed defect in the firmware. Also, why do you think AT3 is so much faster than AT and AT2 ? I had thought that the radio link capacity limited the throughput to 1 message every 5 - 7 seconds ?
Re: siemens firmware
www.pashkovsky.com/siemens/ Good luck. p.s. try searching through list before you ask a question, cause it was answered many times already .. - Original Message - From: Steffen Lindemann [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 14, 2001 12:31 PM Subject: siemens firmware I am looking for a page with Siemens M20 firmware and I can't find it. Anyone have a link? Best regards Steffen Lindemann
Re: 10 msg/sec performance
Only direct SMSC connection will give you such a performance. You need TCP/X.25/ISDN link. No GSM modem is able to work at this traffic. - Original Message - From: Ozkan ERENER To: [EMAIL PROTECTED] Sent: Wednesday, November 14, 2001 6:29 PM Subject: 10 msg/sec performance Hi list - I need to offer a solution with 10 msg/sec incoming message rate. Can I get to that level of performance with the AT2 driver? Would anyone recommend any special GSM modem for that performance measure? thanks very much, Ozkan Erener VeriPark
At modules
Hi all, since we still had some troubles with recent AT2 module, I have tried the new AT module made by Matthew. The kannel I got from his page was installed in production machine. I was amazed by performance, it was really nice to discover that siemens could actually be this fast! The speed is greatly improved, and I didn't speak about stability yet. I think the new AT is way better than the previous one and if you compare stability+productivity, than better than AT2 too, though I really like the changes Andreas made to AT2. Look at this line to understand : 6 AT: /dev/usb/ttyUSB6 (online 218s, rcvd 155, sent 0, failed 0, queued 0 msgs) This is fantastic. The previous At module's best result was 1 sms per 5 sec. I think we should change the AT in CVS with this one. Extremely recommended.
Re: At modules
Hi all, don't hurry with the update, I already found some minor bugs. There's one strange thing when new AT cannot delete a mesage from SIM, it reads it again and again. The position cursor is mismatched. Log : 2001-11-13 19:14:56 [15] DEBUG: Read from modem: 'OK'2001-11-13 19:14:56 [15] DEBUG: AT: Command: AT+CMGR=62001-11-13 19:14:57 [9] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:57 [7] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:57 [11] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:57 [21] DEBUG: Read from modem: '+CMGR: 1,,240791449737019037200C9144876171453110'2001-11-13 19:14:57 [21] DEBUG: Read from modem: '+CMGR: 1,,240791449737019037200C91448761714531104100840005CCFCF83D07 OK'2001-11-13 19:14:57 [21] DEBUG: AT: Command: AT+CMGD=12001-11-13 19:14:57 [21] DEBUG: Read from modem: '+CMS ERROR: 321'2001-11-13 19:14:57 [21] DEBUG: deleteing index at mem index : 1 2001-11-13 19:14:57 [21] DEBUG: smscconn (AT: /dev/usb/ttyUSB7): new message received2001-11-13 19:14:57 [21] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:57 [6] DEBUG: boxc_sender: sent message to 127.0.0.12001-11-13 19:14:57 [5] DEBUG: boxc_receiver: got ack2001-11-13 19:14:57 [15] DEBUG: Read from modem: 'OK'2001-11-13 19:14:57 [15] DEBUG: AT: Command: AT+CMGR=72001-11-13 19:14:57 [19] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:57 [21] DEBUG: AT: Command: AT+CMGR=12001-11-13 19:14:58 [13] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:58 [15] DEBUG: Read from modem: 'OK'2001-11-13 19:14:58 [15] DEBUG: AT: Command: AT+CMGR=82001-11-13 19:14:58 [21] DEBUG: Read from modem: '+CMGR: 1,,240791449737019037200C9144876171453110'2001-11-13 19:14:58 [21] DEBUG: Read from modem: '+CMGR: 1,,240791449737019037200C91448761714531104100840005CCFCF83D07 OK'2001-11-13 19:14:58 [21] DEBUG: AT: Command: AT+CMGD=12001-11-13 19:14:58 [17] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:58 [21] DEBUG: Read from modem: '+CMS ERROR: 321'2001-11-13 19:14:58 [21] DEBUG: deleteing index at mem index : 1 2001-11-13 19:14:58 [21] DEBUG: smscconn (AT: /dev/usb/ttyUSB7): new message received2001-11-13 19:14:58 [21] DEBUG: AT: Command: AT+CPMS="SM"2001-11-13 19:14:58 [6] DEBUG: boxc_sender: sent message to 127.0.0.12001-11-13 19:14:58 [5] DEBUG: boxc_receiver: got ack2001-11-13 19:14:59 [21] DEBUG: AT: Command: AT+CMGR=12001-11-13 19:14:59 [15] DEBUG: Read from modem: 'OK'2001-11-13 19:14:59 [15] DEBUG: AT: Command: AT+CMGR=9 - Original Message - From: "Nick Clarey" [EMAIL PROTECTED] To: "Alexei Pashkovsky" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Tuesday, November 13, 2001 8:17 PM Subject: Re: At modules Howdy, The previous At module's best result was 1 sms per 5 sec. I think we should change the AT in CVS with this one. Extremely recommended. Great, I'd love to. Now if someone could just submit a properly formatted patch for review...it might get applied. Feeling keen, Alexei? See ya, Nick
Re: EMS Specs
I've done some tests so far. The bad news are EMS is not a standard but rather a unified format, not supported in same way by handset manufacturers. I've been able to send a picture message to Siemens handsets, but it doesn't work for ericsson. This means we got lots of problems again , as in smart messanging case. Every manufacturer makes his own standard. - Original Message - From: Oleg Podolsky [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 02, 2001 9:36 PM Subject: RE: EMS Specs Hi all! Still, is there somebody, who already tested EMS. If any, could you send an example of short_message for Kannel? Oleg. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Steffen Lindemann Sent: Monday, October 15, 2001 9:19 AM To: [EMAIL PROTECTED] Subject: RE: EMS Specs Try 3gpp.org or http://www.3gpp.org/ftp/Specs/2001-09/Rel-5/23_series/23040-510.zip Steffen Lindemann -Original Message- From: Alexei [SMTP:[EMAIL PROTECTED]] Sent: Sunday, October 14, 2001 3:33 PM To: [EMAIL PROTECTED] Subject: EMS Specs Hi all, recently I got the Siemens ME45 handset. I'd like to try it's EMS functionality. Anyone got the spec or string example to send with Kannel? Thanks.
Re: For your kind attention!
Hi all, reminding the location of siemens firmware i uploaded : www.pashkovsky.com/siemens/ Just FYI, we currently run AT2 module from lastest CVS with 8(!) siemens m20T devices connected on same machine and we use them for both incoming and outgoing traffic. System is stable, and works smooth. If you wonder how one connected 8 serial devices to a PC, check this : http://www.ionetworks.com/products/edgeport.html - Original Message - From: Stipe Tolj [EMAIL PROTECTED] To: idowu oduntan [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, October 30, 2001 10:47 AM Subject: Re: For your kind attention! I am presently setting up Kannel to run as an SMS gateway using compiled version of 1.0.3. I am using a siemens GSM modem as the SMSC. With my present configurations, I can send messages through my smsc from the admin html console via a browser. But messages sent to me are not received and no indications of these are made in any form, even in the logs. If you are running an older firmware version on your Siemens M20 then this may be the cause. Please search the mailing list archive for an update location someone posted recently, where you can get the update for the firmware software. Anyway, 1.0.3 is quite old, considered in terms of smsc_at.c (the GSM modem SMSC implementation). You should be using a CVS snapshot instead. Unfortunatly we currently don't have any latest stable release, so CVS is appropriate for now. I am not receiving messages via the smsc. Is there a specific receive-thread that must be started before messages can be recieved? No, bearerbox is responsible for serial com communication and smsbox for the processing. Does the bearerbox listen continuosly to the smsc and is there a way I can dictate the frequency at which the bearerbox retrieves messages from the smsc(phone modem). No, bearerbox does (or should :)) listen continously for incomding messages. Can you send as much messages as you want via the SMSC, but don't receive any? Or may it be that you send a couple of messages, the SMSC connection drops and you try to receive and wonder why it does not come? Anyway, a bearerbox and smsbox log (not to heavy please :)) would be best for the list to review what you are trying. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: For your kind attention!
No Windoze, pure Linux. System runs Mandrake 7, and it's a dual PIII with 1Gb RAM Compaq Server. Ionetworks USB drivers are very nice and fun to use, the only thing I miss in their devices are rack compatibility for rack mounting .. and siemens didn't think about it neither. If you wonder how one connected 8 serial devices to a PC, check this : http://www.ionetworks.com/products/edgeport.html This is indeed interesting, since we would need that kind of setup Are you running Linux system or Windows? I noticed that IOnetworks has Linux drivers, I'm just interested if they are reliable. Switching to Windows isn't really an option for us. -- Mikko Kiesilä +358 40 900 9924 [EMAIL PROTECTED]
Re: For your kind attention!
1)open minicom or any serial terminal and type ATI you should get Siemens firmware version 2)if you loose power during the upgrade.. well, what happens if you drop a hummer on your siemens ? I think these are equal, and the answer would be - go to the service center. - Original Message - From: Patrick Mignott [EMAIL PROTECTED] To: Alexei Pashkovsky [EMAIL PROTECTED] Sent: Tuesday, October 30, 2001 6:39 PM Subject: Re: For your kind attention! two questions, how do i know what frameware my m20t is running? also what if i lose power during upgrade? what recover efforts can be made? - Original Message - From: Alexei Pashkovsky [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, October 30, 2001 12:50 AM Subject: Re: For your kind attention! Hi all, reminding the location of siemens firmware i uploaded : www.pashkovsky.com/siemens/ Just FYI, we currently run AT2 module from lastest CVS with 8(!) siemens m20T devices connected on same machine and we use them for both incoming and outgoing traffic. System is stable, and works smooth. If you wonder how one connected 8 serial devices to a PC, check this : http://www.ionetworks.com/products/edgeport.html - Original Message - From: Stipe Tolj [EMAIL PROTECTED] To: idowu oduntan [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, October 30, 2001 10:47 AM Subject: Re: For your kind attention! I am presently setting up Kannel to run as an SMS gateway using compiled version of 1.0.3. I am using a siemens GSM modem as the SMSC. With my present configurations, I can send messages through my smsc from the admin html console via a browser. But messages sent to me are not received and no indications of these are made in any form, even in the logs. If you are running an older firmware version on your Siemens M20 then this may be the cause. Please search the mailing list archive for an update location someone posted recently, where you can get the update for the firmware software. Anyway, 1.0.3 is quite old, considered in terms of smsc_at.c (the GSM modem SMSC implementation). You should be using a CVS snapshot instead. Unfortunatly we currently don't have any latest stable release, so CVS is appropriate for now. I am not receiving messages via the smsc. Is there a specific receive-thread that must be started before messages can be recieved? No, bearerbox is responsible for serial com communication and smsbox for the processing. Does the bearerbox listen continuosly to the smsc and is there a way I can dictate the frequency at which the bearerbox retrieves messages from the smsc(phone modem). No, bearerbox does (or should :)) listen continously for incomding messages. Can you send as much messages as you want via the SMSC, but don't receive any? Or may it be that you send a couple of messages, the SMSC connection drops and you try to receive and wonder why it does not come? Anyway, a bearerbox and smsbox log (not to heavy please :)) would be best for the list to review what you are trying. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: For your kind attention!
Nice indeed, they say it even has the rackmount interface :) The only thing is it has PCI/ISA interface which is not always the best solution, while edgeport use USB port. Does it work good with simultaneous multiport traffic loads? - Original Message - From: Frederik Ammitzbøll [EMAIL PROTECTED] To: KannelDevel [EMAIL PROTECTED] Sent: Tuesday, October 30, 2001 4:53 PM Subject: SV: For your kind attention! As an alternative to Alexei's link below you might want to check out: http://www.moxa.com/product/intellio/C320.htm Works like a charm on any linux platform. cheers, Frederik Ammitzbøll Unwire Vestergade 12A, 3. 1456 København K Denmark Tlf.: +45 33 33 08 70 Mobil: +45 27 11 99 99 Fax : +45 33 33 09 70 Web: www.unwire.dk Just FYI, we currently run AT2 module from lastest CVS with 8(!) siemens m20T devices connected on same machine and we use them for both incoming and outgoing traffic. System is stable, and works smooth. If you wonder how one connected 8 serial devices to a PC, check this : http://www.ionetworks.com/products/edgeport.html - Original Message - From: Stipe Tolj [EMAIL PROTECTED] To: idowu oduntan [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, October 30, 2001 10:47 AM Subject: Re: For your kind attention! I am presently setting up Kannel to run as an SMS gateway using compiled version of 1.0.3. I am using a siemens GSM modem as the SMSC. With my present configurations, I can send messages through my smsc from the admin html console via a browser. But messages sent to me are not received and no indications of these are made in any form, even in the logs. If you are running an older firmware version on your Siemens M20 then this may be the cause. Please search the mailing list archive for an update location someone posted recently, where you can get the update for the firmware software. Anyway, 1.0.3 is quite old, considered in terms of smsc_at.c (the GSM modem SMSC implementation). You should be using a CVS snapshot instead. Unfortunatly we currently don't have any latest stable release, so CVS is appropriate for now. I am not receiving messages via the smsc. Is there a specific receive-thread that must be started before messages can be recieved? No, bearerbox is responsible for serial com communication and smsbox for the processing. Does the bearerbox listen continuosly to the smsc and is there a way I can dictate the frequency at which the bearerbox retrieves messages from the smsc(phone modem). No, bearerbox does (or should :)) listen continously for incomding messages. Can you send as much messages as you want via the SMSC, but don't receive any? Or may it be that you send a couple of messages, the SMSC connection drops and you try to receive and wonder why it does not come? Anyway, a bearerbox and smsbox log (not to heavy please :)) would be best for the list to review what you are trying. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
converting for nokia
Hi list, long time ago I made some bmp2ota and txt2nok convertors to convert graphics and ringtones from windows bmp and txt format to nokia over the air format. Somehow I lost the convertors scripts, but I remmember posting it to community. If anyone of you still has them, please email to me. Thanks a lot !
compiling warnings
Hi all, currently the cvs compilation has these warnings : gcc -D_REENTRANT=1 -I. -g -O2 -I/usr/local/include/libxml -I/usr/local/include -o gw/wap_push_si_compiler.o -c gw/wap_push_si_compiler.cgw/wap_push_si_compiler.c: In function `si_compile':gw/wap_push_si_compiler.c:160: warning: assignment makes pointer from integer without a castgcc -D_REENTRANT=1 -I. -g -O2 -I/usr/local/include/libxml -I/usr/local/include -o gw/wml_compiler.o -c gw/wml_compiler.cgw/wml_compiler.c: In function `wml_compile':gw/wml_compiler.c:283: warning: assignment makes pointer from integer without a castgcc -D_REENTRANT=1 -I. -g -O2 -I/usr/local/include/libxml -I/usr/local/include -o gw/xml_shared.o -c gw/xml_shared.c Anyone knows what causes them and tried to solve ? Besides, --disable-docs flag didn't work this time.
Re: Siemens M20 (this modem have some bugs)
Well, actually I'd say it's not the ideal modem, but it is still better than wavecom devices. We have ordered Siemens in the first place, than changed to Wavecom, worked for about 2 months and reverted back to siemens, cause they made less problems. I guess you will be fine with M20T, just upgrade the firmware. You may find soft for this here : www.pashkovsky.com/siemens/ i say this statment in the updated manual Siemens M20 (this modem have some bugs) now this is bad for me seeing that i just order one, does anyone know what the bugs are?
Re: Does Kannel work with PDA
Title: Re: Statistics Well, I guess Kannel does not RUN on PDA's currently if thats the question. But, it's opensource, thus you have it's sources and if you want it to run on lets say some iPAQ machine that runs Linux as a primary OS, it IS possible to accomplish such a task. There were some ideas about porting Kannel to imbedded platform, but I'm not sure if they were ever finished. - Original Message - From: guru To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, October 24, 2001 9:41 AM Subject: Does Kannel work with PDA Hi List, I wanted to know whether Kannel can work with PDA's. Any pointers will be appreciated. regards Guru
Re: no one knows about leading spaces??!
Hi all, Hamid Yusefzadeh wrote: Dear kannelers, I asked the meaning of leading spaces in smpp specification and another question. But I have not received any responses yet. No one knows about it??? thanx Hamid Yusefzadeh Well, leading spaces means spaces at the start of a message ;) Or have you something more specific in your mind ? This is an interesting point of view .. What I think there was a mistake with the spaces word, and the correct phrase was leading zeros , thus addressed to the whole democratic election system, when people are electing their leaders. Since this is too much political and we are only software developers, I think, dear Hamid, we might consider this discussion topic closed. *Sigh* Alexei.
Re: syntax error in current CVS (HTTP_PORT)
I saw the same error. Besides, current SMPP module is faulty. It drops core if u try to get http status with a web browser. I reverted back to the 1.0.4 version and it works better. - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, October 22, 2001 5:17 PM Subject: syntax error in current CVS (HTTP_PORT) Hi. If I try to build from the files currently in CVS, I get this gcc -D_REENTRANT=1 -I. -g -O2 -I/usr/include/libxml2/libxml -I/usr/include/libxml2 -DBROKEN_PTHREADS=1 -o gw/wap_push_ppg.o -c gw/wap_push_ppg.c gw/wap_push_ppg.c: In function `wap_push_ppg_init': gw/wap_push_ppg.c:262: `HTTP_PORT' undeclared (first use in this function) gw/wap_push_ppg.c:262: (Each undeclared identifier is reported only once gw/wap_push_ppg.c:262: for each function it appears in.) make: *** [gw/wap_push_ppg.o] Error 1 but if I change HTTP_PORT to DEFAULT_HTTP_PORT, it compiles OK.
General question
Hi all, anyone knows how may I contact this person : Jouko Koski (EDS) ? Thanks.
Re: [Fwd: RE: EMS]
well.. damn :( anyone not updated read the news. God help all of us. Bye.
OIS module bug
smime.p7m
Re: SMPP message delivery report
No, as proposed by Andreas, you will get an MO to the sender gateway with some special word and all the DN data. You might than parse it in your application to send emails or anything else. - Original Message - From: Erick Fuentes [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, September 10, 2001 10:08 PM Subject: SMPP message delivery report Hi all, Is the implementation of the delivery reports working for SMPP? How will it work? I would like to have a webpage where you can enter either another phone number or email in order to receive the confirmation via another short message or via email. Thanks, Erick
Re: Unicode messages
Did not work for me .. where was this added ? I am using 1.1.4 stable at the moment. - Original Message - From: Bruno David Rodrigues To: Alexei Pashkovsky ; [EMAIL PROTECTED] Sent: Monday, September 03, 2001 2:09 PM Subject: Re: Unicode messages Try latest cvs with http://.text=ãäÜôêcharset=ISO-8859-1coding=3 - Original Message - From: Alexei Pashkovsky To: [EMAIL PROTECTED] Sent: Sunday, August 26, 2001 3:19 PM Subject: Unicode messages Hi all, anyone tried sending unicode text with Kannel ? I want to send messages using hebrew and other alphabets, but the most urgent are messages with special letters from european alphabets, like german, french, spanish etc (Üôê) Any tips ?
Unicode messages
Hi all, anyone tried sending unicode text with Kannel ? I want to send messages using hebrew and other alphabets, but the most urgent are messages with special letters from european alphabets, like german, french, spanish etc (Üôê) Any tips ? smime.p7s
Re: Mobile screen savers
well, nokia specs say it is, but never saw such screensaver. - Original Message - From: Oleg Podolsky [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, August 03, 2001 11:08 AM Subject: RE: Mobile screen savers Is it even possible to send animated screensavers (similar to animated gifs)? I succeed to send one-frame screensaver, but don't manage to do the same for multi-frame. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alexei Pashkovsky Sent: Thursday, August 02, 2001 5:29 PM To: Oleg Podolsky; [EMAIL PROTECTED] Subject: Re: Mobile screen savers hi there.. we have this ability on sema and smpp. 4-sms packet for each screensaver. - Original Message - From: Oleg Podolsky [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, August 02, 2001 4:08 PM Subject: Mobile screen savers Hello! I am trying to send a mobile screen saver over SMPP, but somehow it doesn't reach the phone. Everything seems to be ok in the messages. Has anybody tried to sent a screen saver and succeeded? Oleg.
Re: Mobile screen savers
hi there.. we have this ability on sema and smpp. 4-sms packet for each screensaver. - Original Message - From: Oleg Podolsky [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, August 02, 2001 4:08 PM Subject: Mobile screen savers Hello! I am trying to send a mobile screen saver over SMPP, but somehow it doesn't reach the phone. Everything seems to be ok in the messages. Has anybody tried to sent a screen saver and succeeded? Oleg.
Re: Sema 2000 protocol issue
What module do you use ? OIS ? Sema ? I have patches for sema to support udh, and ois supports already. - Original Message - From: Venugopal Panchamukhi To: [EMAIL PROTECTED] Sent: Wednesday, August 01, 2001 2:19 PM Subject: Sema 2000 protocol issue Hi, Does Sema 2000 protocol support binary messages. I'm using the stable version of kannel using Sema 2000 protocol. When i'm sending a ring tone using a lynx brower, my 3310 phone was displaying "Message cannot be displayed here". What could be the problem? I presume the SMSC is supporting binary messages. And how to go ahead to check whether kannel is supporting it or not. Thanks for the earliest attention. Rgds, Venu -- Venugopal Panchamukhi Mobile# +358-(0)9-4110 1675 E-Mail: [EMAIL PROTECTED] [EMAIL PROTECTED]
Re: Vodafone UK Connection
If help still needed, contact me. Best regards ..
Kannel heartbeat
Hi all, I have another question .. When I run kannel, from the beginning it runs the pending message function once every 2 seconds, and this works nicely. When I have an incoming message (MO), it starts the pending message function (which checks for MO's) much more often, and than I have problems with physical device, being unable to read with that speed .. How can I reduce Kannel heartbeat after MO receival, so it will keep in range of 1-2 pening function opens per second, and not 10-20 .. ? Thanks. smime.p7s
OCTSTR error ..
Hi all, does anyone know where could be the problem ? 2001-07-07 17:58:10 [5] INFO: -=-=sema_msglist_pop=-=-2001-07-07 17:58:10 [5] ERROR: Start marker was damaged for area 0xbeffdbb42001-07-07 17:58:10 [5] ERROR: Could not find area information.2001-07-07 17:58:10 [5] PANIC: gwlib/octstr.c:2034: seems_valid_real: Assertion `gw_check_is_allocated(ostr)' failed. (Called from gwlib/octstr.c:277:octstr_duplicate_real.) function name is as stated in info, msglist_pop .. could it be that octstr containing message was somehow corrupted, or may be octstr structure is not correct ? Thanks. smime.p7s
Re: Archives up
Hi all, I have a general question regarding Kannel and Serial device interfaces it uses with Sema, AT, may be other modules.. I saw a few times situations when serial port call returns cut or corrupted packet string, both in Sema and AT module (you may see this in AT when message is coming and you try to send one same time, this causes Kannel to make retries etc). Same problem is with Sema (when there's an incoming packet request, and gw tries to send outgoing one same time, reading from port gives corrupted string). Any serial device specialists with tips or propositions ? Thanks :)
