Re: [Dx4win] Cluster connects but no updates after

[Duane Calvin]

Thanks for a new clue, Kostas - around the same time the trouble started I 
switched from an AT Uverse modem/router to one from Time-Warner.  I will also 
check out VE7CC's client . . . 

73, Duane

Duane Calvin, AC5AA
Austin, Texas
ac...@ac5aa.com 


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Sunday, November 15, 2015 4:43 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Cluster connects but no updates after

I had also problems with clusters in the past. Clusters' connection braked 
after some time. I used VE7CC's client program which has a function to keep the 
connection alive. Dx4win was connected on this program and I could watch the 
spots. After a lot of time I  found that it was a problem in my adsl 
router/modem as when I changed this, I can connect to the clusters directly 
without a problem. I don' t know if this is your problem but just in case.

By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a 
cluster interface but just a connection to ve7cc (beside this I wouldn't make a 
rig control routine also but just a connection to omnirig). My problem with 
ve7cc, is that many times I get bored to run another program and make the 
connection routine also. A nice solution would be if a future version of dx4win 
has an option to run ve7cc and connect to it automatically. Maybe there is an 
external program do this. Any info?

73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:
> Hi all - I have a peculiar problem that has cropped up.  I can't tell 
> if it's due to an MS update, or from my installing the latest Norton 
> Security software.  All has been working fine for some time, but as of 
> the last couple of weeks (roughly since I did the Norton install) I 
> can connect to a cluster, do a SH/DX to list the last series of spots, 
> but then nothing after that and I lose connection.  Now, I've got my 
> spots limited to 5-land, and there are not a lot of people actively 
> spotting in 5-land, but somehow the connection gets lost.  I don't see 
> any disconnect messages unless I try to send a spot, or do another 
> SH/DX in which case there is no response, and eventually I get a 
> message that the connection is closed.  I've looked through the Norton 
> settings but probably don't know what to look for.  If anyone can give me 
> some hints, I'd sure appreciate it.
>
>   
>
> 73, Duane
>
>   
>
> Duane Calvin, AC5AA
>
> Austin, Texas
>
> ac...@ac5aa.com
>
>   
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Kostas SV1DPI]

I had also problems with clusters in the past. Clusters' connection 
braked after some time. I used VE7CC's client program which has a 
function to keep the connection alive. Dx4win was connected on this 
program and I could watch the spots. After a lot of time I  found that 
it was a problem in my adsl router/modem as when I changed this, I can 
connect to the clusters directly without a problem. I don' t know if 
this is your problem but just in case.


By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a 
cluster interface but just a connection to ve7cc (beside this I wouldn't 
make a rig control routine also but just a connection to omnirig). My 
problem with ve7cc, is that many times I get bored to run another 
program and make the connection routine also. A nice solution would be 
if a future version of dx4win has an option to run ve7cc and connect to 
it automatically. Maybe there is an external program do this. Any info?


73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:

Hi all - I have a peculiar problem that has cropped up.  I can't tell if
it's due to an MS update, or from my installing the latest Norton Security
software.  All has been working fine for some time, but as of the last
couple of weeks (roughly since I did the Norton install) I can connect to a
cluster, do a SH/DX to list the last series of spots, but then nothing after
that and I lose connection.  Now, I've got my spots limited to 5-land, and
there are not a lot of people actively spotting in 5-land, but somehow the
connection gets lost.  I don't see any disconnect messages unless I try to
send a spot, or do another SH/DX in which case there is no response, and
eventually I get a message that the connection is closed.  I've looked
through the Norton settings but probably don't know what to look for.  If
anyone can give me some hints, I'd sure appreciate it.

  


73, Duane

  


Duane Calvin, AC5AA

Austin, Texas

ac...@ac5aa.com

  


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Radivoj Kar, F6GNZ via DX4WIN]

I think the DX4WIN Updater has DXcluster update that contains the "keep alive" 
mode...
73, Radi F6GNZ
 


 Le Dimanche 15 novembre 2015 14h51, Duane Calvin <ac...@ac5aa.com> a écrit 
:
   
 

 Thanks for a new clue, Kostas - around the same time the trouble started I 
switched from an AT Uverse modem/router to one from Time-Warner.  I will also 
check out VE7CC's client . . . 

    73, Duane

Duane Calvin, AC5AA
Austin, Texas
ac...@ac5aa.com 


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Sunday, November 15, 2015 4:43 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Cluster connects but no updates after

I had also problems with clusters in the past. Clusters' connection braked 
after some time. I used VE7CC's client program which has a function to keep the 
connection alive. Dx4win was connected on this program and I could watch the 
spots. After a lot of time I  found that it was a problem in my adsl 
router/modem as when I changed this, I can connect to the clusters directly 
without a problem. I don' t know if this is your problem but just in case.

By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a 
cluster interface but just a connection to ve7cc (beside this I wouldn't make a 
rig control routine also but just a connection to omnirig). My problem with 
ve7cc, is that many times I get bored to run another program and make the 
connection routine also. A nice solution would be if a future version of dx4win 
has an option to run ve7cc and connect to it automatically. Maybe there is an 
external program do this. Any info?

73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:
> Hi all - I have a peculiar problem that has cropped up.  I can't tell 
> if it's due to an MS update, or from my installing the latest Norton 
> Security software.  All has been working fine for some time, but as of 
> the last couple of weeks (roughly since I did the Norton install) I 
> can connect to a cluster, do a SH/DX to list the last series of spots, 
> but then nothing after that and I lose connection.  Now, I've got my 
> spots limited to 5-land, and there are not a lot of people actively 
> spotting in 5-land, but somehow the connection gets lost.  I don't see 
> any disconnect messages unless I try to send a spot, or do another 
> SH/DX in which case there is no response, and eventually I get a 
> message that the connection is closed.  I've looked through the Norton 
> settings but probably don't know what to look for.  If anyone can give me 
> some hints, I'd sure appreciate it.
>
>  
>
>                73, Duane
>
>  
>
> Duane Calvin, AC5AA
>
> Austin, Texas
>
> ac...@ac5aa.com
>
>  
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

 
  
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Jim Reisert AD1C]

On Sun, Nov 15, 2015 at 12:55 PM, Radivoj Kar, F6GNZ wrote:

> I think the DX4WIN Updater has DXcluster update that contains the "keep 
> alive" mode...

It does, but it doesn't work nearly as well as the VE7CC user program.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster connects but no updates after

[Duane Calvin]

Hi all - I have a peculiar problem that has cropped up.  I can't tell if
it's due to an MS update, or from my installing the latest Norton Security
software.  All has been working fine for some time, but as of the last
couple of weeks (roughly since I did the Norton install) I can connect to a
cluster, do a SH/DX to list the last series of spots, but then nothing after
that and I lose connection.  Now, I've got my spots limited to 5-land, and
there are not a lot of people actively spotting in 5-land, but somehow the
connection gets lost.  I don't see any disconnect messages unless I try to
send a spot, or do another SH/DX in which case there is no response, and
eventually I get a message that the connection is closed.  I've looked
through the Norton settings but probably don't know what to look for.  If
anyone can give me some hints, I'd sure appreciate it.  

 

   73, Duane

 

Duane Calvin, AC5AA

Austin, Texas

ac...@ac5aa.com 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html