Re: [Elecraft] KXPD1 as a sideswiper?
John, Certainly, but it is a permanent change (until changed back) and requires soldering. Leave the wire to the dot side board (the one connected to the tip of the plug - use your ohmmeter) connected, but remove the wire to the dash side (goes to the ring). Then wire the dot side and dash side boards together. Set the INP menu to HND and swipe away. 73, Don W3FPR On 5/9/2016 2:53 PM, John Flynn wrote: Good Day Everyone, Is it possible to re-jigger the KXPD1 as a sideswiper (not a straight key)? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPD1 and Loctite 242
Moe wrote: Being a connoisseur of the various grades of Loctite, frustration with the loosening of the KXPD1 thumbscrew tempts me to use a drop of #242, know as, and the color of, blue. This is the removable grade. My question is, has anyone here (especially W3FPR) used this successfully? The 'blue' grades of Loctite are designed to allow removal with hand tools, and 242/243 is superb for antennas and rotators. However, these grades may be too strong for use with very small screws. Maybe you could try one of the 'pink' grades of Loctite which are specifically designed for small instrument screws and clock repairs. -- 73 from Ian GM3SEK http://www.ifwtech.co.uk/g3sek __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KXPD1 and Loctite 242
Moe, I would shudder to think of locktite of any variety being used on the KXPD1 thumbscrew - you just might want to remove it someday. Removable is just not that much removable - it works for things that need wrenches to remove, but the thumbscrew is a small diameter. Newer KXPD1s come with an internal toothed lockwasher that can be optionally used instead of the normal flat lockwasher, so you might want to give that a try instead - use a #6 lockwasher, and beef it down with your strongest fingers, it should hold. 73, Don W3FPR On 2/12/2011 8:16 PM, Moe wrote: Being a connoisseur of the various grades of Loctite, frustration with the loosening of the KXPD1 thumbscrew tempts me to use a drop of #242, know as, and the color of, blue. This is the removable grade. My question is, has anyone here (especially W3FPR) used this successfully? 73 de Moe AB8XA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KXPD1 Paddle Action
Steve, The KXPD1 can be very sensitive. The action will feel stiff if you are in the habit of applying pressure to the paddles with your thumb and finger well up onto the cover pads. If you make contact near the outer ends of the finger pads, the action can be very sensitive. The outward curving springs are usually just fine, and in many cases are not curved out enough and make contact with no pressure at all on the pads. If you are already pressing the paddles near the outer ends, then yes, you can try bending the silver wires up a bit - do only a tiny bit at a time until you get it right for you. You can always bend the wires back down if you go too far. 73, Don W3FPR Steven Pituch wrote: Hi All, I wonder if I made an assembly error when putting together my KXPD1 paddle. Its action is very stiff. I need to hold the radio to be able to apply enough pressure to make the dots and dashes. If you look at this SQ5M video that I found on YouTube the action is very light. http://tinyurl.com/yac6c52 I would love to have my paddle action just as light as SQ5M's. Any suggestions? The springs are curved outwards and appear to be very stiff. I notice that Figure 6 in the manaul shows a flat spring. Could this be the reason the action is stiffer? I am hesitant to pull up the silver wires a bit until I get some feedback from other users. Thanks, Steve Pituch, W2MY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
RE: [Elecraft] KXPD1 key bail clamp FS
The clamp is sold. Thanks! Greg -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of AB7R Sent: Saturday, January 12, 2008 12:56 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] KXPD1 key bail clamp FS I have a bail clamp for the KXPD1 sitting here bored with nothing to do. :) If anyone would like it for $30 please let me know. The Elecraft item number is KXPD1-K2. Thanks Greg AB7R No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.2/1221 - Release Date: 1/12/2008 2:04 PM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.2/1221 - Release Date: 1/12/2008 2:04 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.2/1221 - Release Date: 1/12/2008 2:04 PM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 screw
What I did was to put a couple small drops Liquid Electrical Tape on the paddles around the screw on the side that goes against the KX1 case and after it dried well there was no more slipping when attached. 73 - Mike WA8BXN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 screw
Jeremiah McCarthy wrote: How many hams have a 6-32 die in their tool kit to use on the paddle screw?...And, if they did have one, it would not be necessary to thread it onto the screw beforehand... Jerry, wa2dkg I for one have dies and taps from 4-40 to at least 3/8-24 plus a few metrics. Given enough projects over enough years, a tool box will grow, until it contains every tool, except the one you need for todays project. The other side of my garage is just the same but with parts. This repeats until we reach the status of SK. 73 and happy father's day, take the time to enjoy the best part of our lives. John WA8KNE ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 screw
In a message dated 6/17/06 8:09:53 AM Eastern Daylight Time, [EMAIL PROTECTED] writes: How many hams have a 6-32 die in their tool kit Me! also 4-40 and 8-32 Thread-a-nut-before-you-cut works well, though. 73 de Jim, N2EY ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KXPD1 cold WX operation?
I can't help directly since a cold day outside here would be anything below room temperature. But try Paul, W0RW, the pedestrian mobile expert. He's out in the CO cold at night in winter. If it is a chronic problem, I bet he has seen it and solved it. [EMAIL PROTECTED] Post the solution if you find one. Eric KE6US www.ke6us.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of n0tu/Steve Sent: Sunday, March 12, 2006 6:24 AM To: [EMAIL PROTECTED]; elecraft@mailman.qth.net Subject: [Elecraft] KXPD1 cold WX operation? Has anyone come up with a solution for their KXPD1 for cold wx operation? Or a modification not using the rubber pads? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KXPD1 Question
Paul, N8XMS wrote: I would be very interested in hearing your opinions about the KXPD1 Plug-in Keyer Paddle for the KX1. How does it feel? Is it adjustable? Is it worth the price? etc. I'm trying to decide if I want to include one when I order a KX1. I've been using a Whiterook Products MK-64 mini keyer/paddle for a few years now for portable QRP work. It's light-weight and not adjustable, but I've gotten used to it and generally like it. I usually hold it in my lap at about a 45 degree angle with my left hand and work it with my right. It feels fine. It is not adjustable. It works great for me. But then I've met very few paddles or keys over the years that I didn't like one way or another. I'm just lucky, I guess. I don't need to spend big bucks on a key or paddles in order to enjoy CW. But then I consider 30 wpm QRQ, and almost all of my QSO's are at between 15 and 25 wpm. Ron AC7AC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 Question
I can speak up on this, it's a VERY NICE little paddle! When you build it you'll see how it works, and there's some adjustability but it's difficult to explain, just get one and see. You can take this paddle and mount it to a stand with a little stereo jack and a threaded hole to accept the retaining screw, not hard to homebrew and that enables you to use it with any rig. I made one of wood and showed it to Wayne Burdick, he thought it was neat and others have made one or two of their own design, Elecraft may come out with a stand for that little paddle, sometime. I'm just starting a woodwork class myself and may crank out some stands some time soon, I'll keep ppl posted. DEFINATELY get one of these paddles with your KX1, to me it's part of what the KX1 is all about, a little spy radio with a little spy (and amazingly good) paddle. 73 de Alex NS6Y. Paul, N8XMS wrote: I would be very interested in hearing your opinions about the KXPD1 Plug-in Keyer Paddle for the KX1. How does it feel? Is it adjustable? Is it worth the price? etc. I'm trying to decide if I want to include one when I order a KX1. I've been using a Whiterook Products MK-64 mini keyer/paddle for a few years now for portable QRP work. It's light-weight and not adjustable, but I've gotten used to it and generally like it. I usually hold it in my lap at about a 45 degree angle with my left hand and work it with my right. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 Question
My experience with the KX1 paddle is that it is a pain It will start out working good and the more I use it on a QSO it finally goes crazy and I cannot even send my own call letters. My call is KD3JF and after I use it a while on a QSO when I get to send my call I can never make the D for it always sends a N. Now recently I can send pretty good with it as long as I am sending at least 20 WPM Paul Gates, KD3JF Elecraft Kits: K1 #0231 KX1 #1186 XG1: Signal Generator - Original Message From: Alexandra Carter [EMAIL PROTECTED] To: Ron D'Eau Claire [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Tuesday, January 24, 2006 5:42:23 PM Subject: Re: [Elecraft] KXPD1 Question I can speak up on this, it's a VERY NICE little paddle! When you build it you'll see how it works, and there's some adjustability but it's difficult to explain, just get one and see. You can take this paddle and mount it to a stand with a little stereo jack and a threaded hole to accept the retaining screw, not hard to homebrew and that enables you to use it with any rig. I made one of wood and showed it to Wayne Burdick, he thought it was neat and others have made one or two of their own design, Elecraft may come out with a stand for that little paddle, sometime. I'm just starting a woodwork class myself and may crank out some stands some time soon, I'll keep ppl posted. DEFINATELY get one of these paddles with your KX1, to me it's part of what the KX1 is all about, a little spy radio with a little spy (and amazingly good) paddle. 73 de Alex NS6Y. Paul, N8XMS wrote: I would be very interested in hearing your opinions about the KXPD1 Plug-in Keyer Paddle for the KX1. How does it feel? Is it adjustable? Is it worth the price? etc. I'm trying to decide if I want to include one when I order a KX1. I've been using a Whiterook Products MK-64 mini keyer/paddle for a few years now for portable QRP work. It's light-weight and not adjustable, but I've gotten used to it and generally like it. I usually hold it in my lap at about a 45 degree angle with my left hand and work it with my right. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 Question
Paul, The KXPD1 is a bit pricier than the Whiterook, but the ATU and the paddle go together to make a rig that really does work with nothing else, just a couple of short wires. I started out without either, but realized that Elecraft was right, and making it self-contained is a big deal. The good news is that you can add one later! Another good idea from Wayne N6KR is the waist pack. Mine is quite full (http://wa5znu.org/log/2005/03/kx1-bag.html) and the KXPD1 fits nicely. 73, Leigh / WA5ZNU Paul Huff wrote: Hello everybody, I would be very interested in hearing your opinions about the KXPD1 Plug-in Keyer Paddle for the KX1. ... I usually hold [whiterook] in my lap at about a 45 degree angle with my left hand and work it with my right. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
re:[Elecraft] kxpd1
Hi, Tom My KX1 is brand new. I didn't know if I'd like the KXPD1 either, but I decided to give it a try. My usual paddle is an old Brown Bros. iambic-- comparable to the Bencher. I use single lever techniques (never quite got the hang of the squeeze techniques). As I was assembling the KXPD1, I thought I was going to hate it. It gives nothing back in terms of touch. Yet, when put it on the air, I can send very well with it using the iambic mode B setting. That's the proof for me. I'm happy with it! 73, Chuck NI0C KX1 s/n 1287 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] kxpd1
I find the KXPD1 to be just fine. For a lot of rag chewing, I prefer my Benchers, but that really isn't what goes on (for me at least) with the KX1. I tend to make QRP QSO's, maybe 3 or 4 exchanges, or do some QRP contesting like the Spartan or FOBB. The KXPD1 doesn't offer much tactile feedback, but it is sure convenient and a lot lighter than the Bencher. I find I can get some adjustment in the feel by sliding the boots in and out a little. YMMV, Fred K6DGW Auburn CA CM98lw tom wrote: hello to all, a general question.. considering the kx1 with the kxpd1. Not sure if the paddles will be to my liking. I am a long time Bencher paddle fan. If anyone can give me any thoughts on what I might expect by comparision? thanks for reading and responding 73 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] kxpd1
Tom, I am strictly a 'single lever paddle' person - in fact I have trouble with most dual lever paddles --- but the KXPD1 is quite easy for me to use. I really don't know why, but it just feels 'natural' to me. I don't own one myself, but have built several for others and found it to be a pleasant paddle to operate. I may buy one of my own even though I likely will not own a KX1 - I will have to create something to mount it on. 73, Don W3FPR -Original Message- hello to all, a general question.. considering the kx1 with the kxpd1. Not sure if the paddles will be to my liking. I am a long time Bencher paddle fan. If anyone can give me any thoughts on what I might expect by comparision?thanks for reading and responding 73 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] kxpd1
Tom, I've been working hamfests around here, showing off my K2 and having lots of fun. I asked the guys at Elecraft to find me someone with a KX1 to help me out as I was getting a lot of questions about it. Wayne talked me into getting one myself, and when I ordered it, I said I wasn't going to get that crazy paddle as I liked my own homebrew paddles better. He threw it in anyway, and warned me that It would grow on me. I built it, I tried it, and I found that for some strange reason I like it. It has a feel that's totally different than any other paddles I've ever used, but it took all of 30 seconds to get used to it. The last hamfest I attended was the first one I took the KX1 to. It was well received by everyone, and everyone that handled it was amazed at how easy the Funny Looking Paddle was to operate with. All I have to say about the KXPD1 is Try it, you'll like it. 72/73 Jim - W0EB -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of tom Sent: Monday, November 28, 2005 7:12 PM To: elecraft@mailman.qth.net Subject: [Elecraft] kxpd1 hello to all, a general question.. considering the kx1 with the kxpd1. Not sure if the paddles will be to my liking. I am a long time Bencher paddle fan. If anyone can give me any thoughts on what I might expect by comparision?thanks for reading and responding 73 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] kxpd1
A Brown Brothers paddle isn't really comparable to a Bencher (it's much better IMHO, and feels almost as good as my Begali Simplex). I've been concerned about the same thing, but maybe I'll give the KXPD1 a try. At least it is a lot lighter than any of my other keys (except the White Rook, which is more like a toy). 73, Bob N7XY On Nov 28, 2005, at 6:09 PM, Chuck Guenther wrote: Hi, Tom My KX1 is brand new. I didn't know if I'd like the KXPD1 either, but I decided to give it a try. My usual paddle is an old Brown Bros. iambic-- comparable to the Bencher. I use single lever techniques (never quite got the hang of the squeeze techniques). As I was assembling the KXPD1, I thought I was going to hate it. It gives nothing back in terms of touch. Yet, when put it on the air, I can send very well with it using the iambic mode B setting. That's the proof for me. I'm happy with it! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] kxpd1
On Mon, 28 Nov 2005, Bob Nielsen wrote: A Brown Brothers paddle isn't really comparable to a Bencher (it's much better IMHO, and feels almost as good as my Begali Simplex). Wow...I have two Brown Brothersthe paddle and the paddle/key combo... Love how they work...and nice to know that they are comparable to the high price spread. 73,Thom-k3hrn www.zerobeat.net Home of QRP Web Ring, Drakelist home page, Free Classified Ads for amateur radio, QRP IRC channel Elecraft Owners Database www.tlchost.net/hosting/ *** Web Hosting as low as 3.49/month ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1
My KX1 has trouble receiving CW reliably at more than 20WPM, and by 25WPM it only gets isolated words .. .. Leigh / WA5ZNU On Fri, 9 Sep 2005 8:36 am, [EMAIL PROTECTED] wrote: ...it works well (took a test run at 20 wpm, 25 wpm,30 wpm and 35 wpm with no sending errors... ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1
Mine has the same problem. I discovered the headphones were clogged by a large dense hairy object between the two earphones. Unfortunately, it can't be fixed. Odd, all of my headphones exhibit that same problem ... but the large dense object is not hairy. Fred K6DGW Auburn CA CM98lw ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1
Could it be caused by the person with the headphones on?...LOL 73 Jim K4ZM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KXPD1
Mine has the same problem. I discovered the headphones were clogged by a large dense hairy object between the two earphones. Unfortunately, it can't be fixed. Eric KE6US www.ke6us.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leigh L Klotz, Jr. Sent: Friday, September 09, 2005 9:01 AM To: [EMAIL PROTECTED]; elecraft@mailman.qth.net Subject: Re: [Elecraft] KXPD1 My KX1 has trouble receiving CW reliably at more than 20WPM, and by 25WPM it only gets isolated words .. .. Leigh / WA5ZNU On Fri, 9 Sep 2005 8:36 am, [EMAIL PROTECTED] wrote: ...it works well (took a test run at 20 wpm, 25 wpm,30 wpm and 35 wpm with no sending errors... ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KXPD1
Mine has the same problem. I discovered the headphones were clogged by a large dense hairy object between the two earphones. Unfortunately, it can't be fixed. True, large dense hairy objects cannot be fixed, but they can be divorced. *DISCLAIMER* This is humor. No Flames Please. Paul N8NOV
Re: [Elecraft] KXPD1 sensitivity
Try swapping the rubber grips. My craftsmanship left the wire on the dit side is a little bumpy, even after squishing it with needle nose pliers-it sends continuous dits with one of the rubber sleeves, but not the other. Also, make sure the spring steel levers are aligned so that they fit into the cavities molded into the rubber grips-if they are out of alignment even a little, they will be trapped against the contact wire-I had this momentary problem when I first assembled mine. (Also, at the risk of telling you something you don't need to know, check that your dit wire is not accidentally grounding to the aluminum bracket somewhere.) 73 Eric N0HHS I just got done with my KX1 construction, including the KXPD1 paddles. Another very nice setup from Elecraft! My question is how do I make the paddles less sensitive to touch. I find that the left side (dits) is very sensitive, and at one point, it started sending dits all on its own. I have squeezed the wires inside down as close to the PC board as they can be, but that didn't help. The right side of the paddle is working fine. Anyone have any other suggestions?? Thanks, Dan W1RDB ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KXPD1 assembly question
I don't know if it is right, but I rotated the lugs themselves so that one was in the channel at the bottom and then just bent the other one down towards the center of the hole and there was enough room to slide a piece of hooked wire in. On Mon, 14 Jun 2004 1:36pm, Eric Ward wrote: I am at the step where you solder the two pieces of hook-up wire to the lugs of the stereo plug. Does anyone have advice about how to best carry that out? 73, WA5ZNU Leigh ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com