Re: CAS 2010 load balance recommentation
The price for the Citrix Netscaler was over $100K. We would have to upgrade our F5 so that is still an option. One of the reasons for the KEMP is that it has integration with UCS. On Tue, May 7, 2013 at 11:09 PM, xyz x...@minneapolis.edu wrote: Greetings Todd, ** ** In addition to the Kemp posts , if you are really doing an evaluation, you may want to look at CITRIX Netscaler, as they have both virtual and hardware redundant options. This may be in the $10K range for a pair of LBs, but do your own vendor investigation, as YMMV. ** ** F5 is another impressive option, but is very expensive – unless you need all the features. ** ** Regardless, if your production environment is critical, consider having a redundant LB system and discuss with your selected vendor regarding recovery options in the event of a LB failure. ** ** HTH. ** ** Thanks ** ** Dana ** ** ** ** ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Wednesday, May 01, 2013 10:44 AM *To:* MS-Exchange Admin Issues *Subject:* CAS 2010 load balance recommentation ** ** Our two Exchange 2010 CAS servers run in VMware 5.0 UCS environment. I am looking for load balance suggestions. -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist
RE: Exchange 2010 TLS setup question
Thank you. I found out that it is even easier with our Barracuda email filter devices. No config changes on the Exchange CAS/HUB servers is needed. It is all done on the Barracuda devices. Enable TLS for the domains add in the receiving fqdn . Done Todd Lemmiksoo sent from my Samsung Android On May 7, 2013 4:52 PM, Michael B. Smith mich...@smithcons.com wrote: I’m not aware of one. It is pretty straight forward. ** ** Create a send-connector that has the relevant destination domain. ** ** Edit the send-connector to specify the FQDN that should be used for originating. ** ** Make sure the certificate for that FQDN is loaded on the exchange servers with the mapped hub transports. ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Monday, May 6, 2013 11:39 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2010 TLS setup question ** ** Is there a document that walks one through the process. All articles I have read talk about importing certificates on the Edge server and running powershell commands there. ** ** On Mon, May 6, 2013 at 10:29 AM, Michael B. Smith mich...@smithcons.com wrote: It does not require an edge server. *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Monday, May 6, 2013 11:13 AM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2010 TLS setup question Subject: Exchange 2010 TLS setup question We currently have Exchange 2010 SP1 no rollups. Two HUB/CAS servers an a DAG wit two mailbox servers. When asked to set up TLS secured mail with one of our vendors. Can this be done without an Edge server? We use two Barracuda email filter boxes as our smart hosts. -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist
Re: Exchange 2010 TLS setup question
Ok i will check the Barracuda certificate that is installled on them. That is how our mail is smart hosted. Todd Lemmiksoo sent from my Samsung Android On May 7, 2013 7:34 PM, Sean Martin seanmarti...@gmail.com wrote: Keep in mind you may need a valid certificate from a trusted certificate authority. If it just worked, it may be using a self-signed cert. This may adequate for some but a lot of entities enforce certificate verification for TLS. - Sean On Tue, May 7, 2013 at 3:42 PM, Todd Lemmiksoo tlemmik...@gmail.comwrote: Thank you. I found out that it is even easier with our Barracuda email filter devices. No config changes on the Exchange CAS/HUB servers is needed. It is all done on the Barracuda devices. Enable TLS for the domains add in the receiving fqdn . Done Todd Lemmiksoo sent from my Samsung Android On May 7, 2013 4:52 PM, Michael B. Smith mich...@smithcons.com wrote: I’m not aware of one. It is pretty straight forward. ** ** Create a send-connector that has the relevant destination domain. ** ** Edit the send-connector to specify the FQDN that should be used for originating. ** ** Make sure the certificate for that FQDN is loaded on the exchange servers with the mapped hub transports. ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Monday, May 6, 2013 11:39 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2010 TLS setup question ** ** Is there a document that walks one through the process. All articles I have read talk about importing certificates on the Edge server and running powershell commands there. ** ** On Mon, May 6, 2013 at 10:29 AM, Michael B. Smith mich...@smithcons.com wrote: It does not require an edge server. *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Monday, May 6, 2013 11:13 AM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2010 TLS setup question Subject: Exchange 2010 TLS setup question We currently have Exchange 2010 SP1 no rollups. Two HUB/CAS servers an a DAG wit two mailbox servers. When asked to set up TLS secured mail with one of our vendors. Can this be done without an Edge server? We use two Barracuda email filter boxes as our smart hosts. -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist
Exchange 2010 TLS setup question
Subject: Exchange 2010 TLS setup question We currently have Exchange 2010 SP1 no rollups. Two HUB/CAS servers an a DAG wit two mailbox servers. When asked to set up TLS secured mail with one of our vendors. Can this be done without an Edge server? We use two Barracuda email filter boxes as our smart hosts. -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist
Re: Exchange 2010 TLS setup question
Is there a document that walks one through the process. All articles I have read talk about importing certificates on the Edge server and running powershell commands there. On Mon, May 6, 2013 at 10:29 AM, Michael B. Smith mich...@smithcons.comwrote: It does not require an edge server. ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Monday, May 6, 2013 11:13 AM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2010 TLS setup question ** ** Subject: Exchange 2010 TLS setup question We currently have Exchange 2010 SP1 no rollups. Two HUB/CAS servers an a DAG wit two mailbox servers. When asked to set up TLS secured mail with one of our vendors. Can this be done without an Edge server? We use two Barracuda email filter boxes as our smart hosts. -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist
Re: CAS 2010 load balance recommentation
Would you mind sharing your opinion on the KEMP product. On Wed, May 1, 2013 at 10:50 AM, Candee can...@gmail.com wrote: I've heard good things about Kemp; we're actually evaluating their product now. On Wed, May 1, 2013 at 11:43 AM, Todd Lemmiksoo tlemmik...@gmail.comwrote: Our two Exchange 2010 CAS servers run in VMware 5.0 UCS environment. I am looking for load balance suggestions. -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: or send an email to with the body: unsubscribe exchangelist
Re: Installing Exchange 2010 RU updates
Thank you all for the tips. Todd Lemmiksoo On Wed, Apr 3, 2013 at 8:07 AM, Randal, Phil phil.ran...@hoopleltd.co.ukwrote: Not sure if this is absolutely necessary, but it might prevent a problem or two. Run the update from an admin (elevated rights) command prompt. Doing it via RDP is fine. If your boxes run Forefront for Exchange, you might find this blog post of mine useful, though it might not be needed for the latest RU updates: http://www.rebee.clara.net/blog/archives/2012/05/entry_199.html It won’t hurt to do that anyhow. And it’s probably time to start thinking about applying SP3 for Exchange 2010. Cheers, Phil -- *Phil Randal* *Infrastructure Engineer* *Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT* Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* 03 April 2013 13:52 *To:* MS-Exchange Admin Issues *Subject:* Installing Exchange 2010 RU updates As I have not had the pleasure of doing an Exchange 2010 RU install. Do you have to do the install from a console session or can it be done through an RDP session. Currently scheduled to install RU8 on our SP1 servers, HUB/CAS DAG MB. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist Hoople Ltd, Registered in England and Wales No. 7556595 Registered office: Plough Lane, Hereford, HR4 OLE Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: 2010 migration
yes On Wed, Mar 27, 2013 at 12:30 PM, Jimmy Tran ji...@jt-solution.com wrote: Well the architect isn’t really an architect, just a system admin who is adamit about his design. The problem is, he doesn’t know anything about exchange 2010… ** ** Anyways, will a NAT rule from the firewall to the CAS work instead of an edge server? ** ** *From:* Oz Casey Dedeal [mailto:telne...@gmail.com] *Sent:* Wednesday, March 27, 2013 8:30 AM *To:* MS-Exchange Admin Issues *Subject:* Re: 2010 migration ** ** Change your architect obvious he does not know what he/ she is doing , sorry for coming staight like this but this is pretty exchange 101 , no Exchange server to be placed in DMZ ( edge is exception ** ** Classis configuration would be all inside ** ** 2 cas hts combined 2 mbx in a DAG ** ** ** ** Now there it depends it could be all 3 roles in a single server , stretched DAG etc. all depends on what you have and how you like to do it. If you R me a side I can share some design Visio with you later on today so you get clear picture ** ** Good luck Oz ** ** On Wednesday, March 27, 2013, Jimmy Tran wrote: My question is for the new 2010 design. My architect wants to put the 2 CAS servers in the DMZ and 2 MBX/HT in the Domain/Trust zone. When we do that I get a lot of WinRM errors in the EMC and topology errors. When I move the CAS into the save trust zone as the MBX/HT all the errors go away. After reading a lot of KB’s, it looks like Microsoft doesn’t recommend putting the CAS in the DMZ. What do you guys have setup and recommend? Do you guys segment the CAS and HT/MBX networks? TIA, Jimmy --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- ** ** --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Can replies to an Exchange 2010 mailbox be stopped in Exchange
Sorry, Exchange 2010 SP1 no UR On Wed, Mar 20, 2013 at 4:54 PM, John Cook john.c...@pfsf.org wrote: You didn’t mention the version of Exchange but in 2007/2010 you should be able to do this with a transport rule. *John W. Cook* *Network Operations Manager* *Partnership For Strong Families* *5950 NW 1st Place* *Gainesville, Fl 32607* *Office (352) 244-1610* *Cell (352) 215-6944* *MCSE, MCP+I, MCTS, CompTIA A+, N+, VSP**4, VTSP4* *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Wednesday, March 20, 2013 5:51 PM *To:* MS-Exchange Admin Issues *Subject:* Can replies to an Exchange 2010 mailbox be stopped in Exchange I have a request from the admin for our temp CEO to block email replies to the CEO's mailbox. Can this be done in Exchange or is this an Outlook rule. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- CONFIDENTIALITY STATEMENT: The information transmitted, or contained or attached to or with this Notice is intended only for the person or entity to which it is addressed and may contain Protected Health Information (PHI), confidential and/or privileged material. Any review, transmission, dissemination, or other use of, and taking any action in reliance upon this information by persons or entities other than the intended recipient without the express written consent of the sender are prohibited. This information may be protected by the Health Insurance Portability and Accountability Act of 1996 (HIPAA), and other Federal and Florida laws. Improper or unauthorized use or disclosure of this information could result in civil and/or criminal penalties. Consider the environment. Please don't print this e-mail unless you really need to. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Error when making a change to a closed distribution group
I fixed the DL by enabling the AD account and added a mailbox to it. After that the Hancock account appeared in the allowed senders list. And I was able to make any changes to the DL that I wanted. At one time the Hancock account had been an allowed sender and was disabled without being removed from DL correctly . On Fri, Mar 1, 2013 at 10:45 AM, Miller Bonnie L. mille...@mukilteo.wednet.edu wrote: Have you tried unlocking the DL completely, then locking it back to just the users you want? If that doesn’t work, maybe also verify the AD permissions on the “Hancock” user account include the Exchange groups that all the other accounts have (so Exchange can access the object). ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, March 01, 2013 7:35 AM *To:* MS-Exchange Admin Issues *Subject:* Error when making a change to a closed distribution group ** ** Still getting the following error when trying to make any change to the distribution group All Users. I need to add an allowed sender to the group. The user Hancock exists in AD as a disabled user. Have tried enabling him with no success. Microsoft Exchange Error The following error(s) occurred while saving changes: Set-DistributionGroup Failed Error: Couldn't find object ghsbtr.net/PHNS Users/Hancock, Tim. Please make sure that it was spelled correctly or specify a different object. OK -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
send-as to distribution group failed 5.7.1
We have a mail universal security group of all employees that has only three users allow to send to it. One of these people did a send to the group as the CEO. The email did not go error 5.7.1 not authorized. They do have permissions to send as the CEO. My question is ... did the email get not sent because it looks like it came from the CEO and not from the person that sent it. When I try to add the CEO to the list of allowed to send to the DL I get an error about object X not being found and the change fails. How can I find object X. Object X used to be a external contact that was removed from AD. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: send-as to distribution group failed 5.7.1
No, the object does not appear. On Tue, Feb 26, 2013 at 2:42 PM, Peter Johnson johnson.pet...@gmail.comwrote: Affirmative to the CEO thing. The system will see the email as coming from the CEO IIRC! Does the object show up in AD when you check the members of the DL? Sent on the run! On 26 Feb 2013, at 22:29, Todd Lemmiksoo tlemmik...@gmail.com wrote: We have a mail universal security group of all employees that has only three users allow to send to it. One of these people did a send to the group as the CEO. The email did not go error 5.7.1 not authorized. They do have permissions to send as the CEO. My question is ... did the email get not sent because it looks like it came from the CEO and not from the person that sent it. When I try to add the CEO to the list of allowed to send to the DL I get an error about object X not being found and the change fails. How can I find object X. Object X used to be a external contact that was removed from AD. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Is New-MailboxExportRequest available in Exchange 2010 SP1
Thanks, learn new things everyday in Exchange. On Tue, Feb 12, 2013 at 11:35 PM, Heaton, Joseph@Wildlife joseph.hea...@wildlife.ca.gov wrote: Actually, by default, no one has the rights for that cmdlet. You have to manually add people using that Mailbox Import Export role. Then, close and reopen the Shell, and the cmdlet will be available. Just went through this myself last week. -Original Message- From: James R. Rupprecht [mailto:jimruppre...@ku.edu] Sent: Tuesday, February 12, 2013 8:27 PM To: Heaton, Joseph@Wildlife; MS-Exchange Admin Issues Subject: RE: Is New-MailboxExportRequest available in Exchange 2010 SP1 If you get that error it usually means that the account you are using doesn't have the appropriate rights. If I recall correctly, New-MailboxExportRequest requires Organization Management rights or can be individually delegated using Mailbox Import Export Role. Jim Rupprecht Enterprise Architect, Microsoft Technologies The University of Kansas Information Technology - Original Message - From: Todd Lemmiksoo [mailto:tlemmik...@gmail.com] Sent: Tuesday, February 12, 2013 8:54 PM To: MS-Exchange Admin Issues Subject: Is New-MailboxExportRequest available in Exchange 2010 SP1 I Get this error message when I try to run New-MailboxExportRequest The term is not recognized as the name of a cmdlet, function, script file, or operable program. -- T. Todd Lemmiksoo --- --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Spam relay problem
What steps should I take to troubleshoot this type of relay? That source IP is not ours. X-ASG-Debug-ID: 1359697244-058e841d914e4a30001-uhLaEQ Received: from biblio (lvelizy-156-45-11-122.w80-11.abo.wanadoo.fr [80.11.32.122]) by securemail1.brgeneral.org with ESMTP id etJOQQqUPhHTkKXN for vacacu2ped...@gmail.com; Thu, 31 Jan 2013 23:40:44 -0600 (CST) X-Barracuda-Envelope-From: ad...@brgeneral.org X-Barracuda-Apparent-*Source-IP: 80.11.32.122 *MIME-Version: 1.0 From: ad...@brgeneral.org To: vacacu2ped...@gmail.com Date: 1 Feb 2013 06:49:58 +0100 Subject: 69.2.47.143 X-Barracuda-Connect: lvelizy-156-45-11-122.w80-11.abo.wanadoo.fr[80.11.32.122] X-Barracuda-Start-Time: 1359697244 X-Barracuda-URL: http://securemail1.brgeneral.org:8000/cgi-mod/mark.cgi X-Barracuda-Orig-Rcpt: vacacu2ped...@gmail.com X-ASG-Orig-Subj: 69.2.47.143 X-Virus-Scanned: by bsmtpd at brgeneral.org X-Barracuda-Spam-Score: 0.14 X-Barracuda-Spam-Status: No, SCORE=0.14 using global scores of TAG_LEVEL=1000.0 QUARANTINE_LEVEL=1000.0 KILL_LEVEL=9.0 tests=MISSING_MID, NO_REAL_NAME X-Barracuda-Spam-Report: Code version 3.2, rules version 3.2.2.121486 Rule breakdown below pts rule name description -- -- 0.14 MISSING_MID Missing Message-Id: header 0.00 NO_REAL_NAME From: does not include a real name Running Barracuda Spam/Email filter appliances and Exchange 2010 SP1 -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Replication error Exchange mixed 2003 2010
Sorry about that. It was an inline paste. I did find an answer for the error message. On Fri, Sep 21, 2012 at 9:51 AM, Sobey, Richard A r.so...@imperial.ac.ukwrote: There is no picture J ** ** *From:* bounce-9550288-8066...@lyris.sunbelt-software.com [mailto: bounce-9550288-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 21 September 2012 15:23 *To:* MS-Exchange Admin Issues *Subject:* Replication error Exchange mixed 2003 2010 ** ** Anyone seen this error in Exchange 2003 Exchange 2010 mixed environment. [image: Description: Image removed by sender.] -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist~WRD000.jpg
Re: Outlook 2003 Exchange 2010 SP1 help
I sent a message from my gmail account, in the message tracking log I see a receive and deliver entry. Nothing else. On Fri, Jun 15, 2012 at 7:58 AM, Todd Lemmiksoo tlemmik...@gmail.comwrote: OK, This morning I sent two messages to the mailbox (from my work PC), 1 from Outlook remembered 1 from GAL. Neither one shows up in Message Tracking. But the ones I sent on 6/14 6/13 show up. On Fri, Jun 15, 2012 at 4:01 AM, Sobey, Richard A r.so...@imperial.ac.ukwrote: Send a message from outside your org and follow the tracking logs up to the point it disappears. Your logs should at least show the message arriving at your HT/Edge server. ** ** *From:* bounce-9524864-8066...@lyris.sunbelt-software.com [mailto: bounce-9524864-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 15 June 2012 03:30 *To:* MS-Exchange Admin Issues *Subject:* RE: Outlook 2003 Exchange 2010 SP1 help ** ** Are You saying that 10 different people have a send problem to one mailbox. Not one mailbox having a receive problem from the rest of the org. I am confused, that is the same as saying one mailbox cannot receive sent mail from the rest of the org. Must be to late for today to work on this. On Jun 14, 2012 5:13 PM, Steve Hart sh...@wrightbg.com wrote: That would imply that the problem is on the sending side, rather than the receiving side. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Outlook 2003 Exchange 2010 SP1 help
No messages hung in the queues. I see entries that say receive for me but nothing else. I have never used the Exchange 2010 Message Tracking Log search before. Always been a EX 2003 guy. On Fri, Jun 15, 2012 at 8:35 AM, Kennedy, Jim kennedy...@elyriaschools.orgwrote: If you sent them from your mailbox they have got to be in message tracking…at least showing a sent from your mailbox. Also check your queues and see if they are hung in there. ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, June 15, 2012 9:03 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Outlook 2003 Exchange 2010 SP1 help ** ** OK, This morning I sent two messages to the mailbox (from my work PC), 1 from Outlook remembered 1 from GAL. Neither one shows up in Message Tracking. But the ones I sent on 6/14 6/13 show up. On Fri, Jun 15, 2012 at 4:01 AM, Sobey, Richard A r.so...@imperial.ac.uk wrote: Send a message from outside your org and follow the tracking logs up to the point it disappears. Your logs should at least show the message arriving at your HT/Edge server. *From:* bounce-9524864-8066...@lyris.sunbelt-software.com [mailto: bounce-9524864-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 15 June 2012 03:30 *To:* MS-Exchange Admin Issues *Subject:* RE: Outlook 2003 Exchange 2010 SP1 help Are You saying that 10 different people have a send problem to one mailbox. Not one mailbox having a receive problem from the rest of the org. I am confused, that is the same as saying one mailbox cannot receive sent mail from the rest of the org. Must be to late for today to work on this. On Jun 14, 2012 5:13 PM, Steve Hart sh...@wrightbg.com wrote: That would imply that the problem is on the sending side, rather than the receiving side. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist ** ** -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Outlook 2003 Exchange 2010 SP1 help
Since I have moved the mailbox to another Mailstore. How soon can I move the mailbox back into the original mailstore. I see that there is a mailbox in the disconnected for his ID. Will this cause any problems if I try to move the mailbox back. On Fri, Jun 15, 2012 at 9:40 AM, Todd Lemmiksoo tlemmik...@gmail.comwrote: No messages hung in the queues. I see entries that say receive for me but nothing else. I have never used the Exchange 2010 Message Tracking Log search before. Always been a EX 2003 guy. On Fri, Jun 15, 2012 at 8:35 AM, Kennedy, Jim kennedy...@elyriaschools.org wrote: If you sent them from your mailbox they have got to be in message tracking…at least showing a sent from your mailbox. Also check your queues and see if they are hung in there. ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, June 15, 2012 9:03 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Outlook 2003 Exchange 2010 SP1 help ** ** OK, This morning I sent two messages to the mailbox (from my work PC), 1 from Outlook remembered 1 from GAL. Neither one shows up in Message Tracking. But the ones I sent on 6/14 6/13 show up. On Fri, Jun 15, 2012 at 4:01 AM, Sobey, Richard A r.so...@imperial.ac.uk wrote: Send a message from outside your org and follow the tracking logs up to the point it disappears. Your logs should at least show the message arriving at your HT/Edge server. *From:* bounce-9524864-8066...@lyris.sunbelt-software.com [mailto: bounce-9524864-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 15 June 2012 03:30 *To:* MS-Exchange Admin Issues *Subject:* RE: Outlook 2003 Exchange 2010 SP1 help Are You saying that 10 different people have a send problem to one mailbox. Not one mailbox having a receive problem from the rest of the org. I am confused, that is the same as saying one mailbox cannot receive sent mail from the rest of the org. Must be to late for today to work on this. On Jun 14, 2012 5:13 PM, Steve Hart sh...@wrightbg.com wrote: That would imply that the problem is on the sending side, rather than the receiving side. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist ** ** -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Outlook 2003 Exchange 2010 SP1 help
NO On Thu, Jun 14, 2012 at 12:08 PM, Michael B. Smith mich...@smithcons.comwrote: Does the email appear in OWA? ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, June 14, 2012 12:41 PM *To:* MS-Exchange Admin Issues *Subject:* Outlook 2003 Exchange 2010 SP1 help ** ** I have several mailboxes that do not receive email sent inside the Exchange organization, all are Outlook 2003. I have tried changing the security setting for the connection to Exchange 2010, to require an encrypted connection. Deleted the outlook profile and rebuilt it. None of these worked. I had the raid 5 set that housed the mail stores fail, Two drives failed. After getting new raid controller card 1 hard drive, restored all of the mailstores from the previous evening. Did not have to restore Exchange itself. Did not trust the hardware, decided to virtualize to NMware. Did a P2V to a ESXi 4.1 host powered up and has been working OK since. I have also moved two of the mailboxes to another mailstore with the same results. Any suggestions a welcome. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Outlook 2003 Exchange 2010 SP1 help
nothing On Thu, Jun 14, 2012 at 3:43 PM, Steve Hart sh...@wrightbg.com wrote: ** Was does message tracking show? ** ** ** ** ***Steve Hart*** Network **Administrator** 503.491.4343 -Direct | 503.492.8160 - Fax -- *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, June 14, 2012 11:59 AM *To:* **MS-Exchange Admin Issues** *Subject:* Re: Outlook 2003 Exchange 2010 SP1 help ** ** NO On Thu, Jun 14, 2012 at 12:08 PM, Michael B. Smith mich...@smithcons.com wrote: Does the email appear in OWA? *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, June 14, 2012 12:41 PM *To:* **MS-Exchange Admin Issues** *Subject:* Outlook 2003 Exchange 2010 SP1 help I have several mailboxes that do not receive email sent inside the Exchange organization, all are Outlook 2003. I have tried changing the security setting for the connection to Exchange 2010, to require an encrypted connection. Deleted the outlook profile and rebuilt it. None of these worked. I had the raid 5 set that housed the mail stores fail, Two drives failed. After getting new raid controller card 1 hard drive, restored all of the mailstores from the previous evening. Did not have to restore Exchange itself. Did not trust the hardware, decided to virtualize to NMware. Did a P2V to a ESXi 4.1 host powered up and has been working OK since. I have also moved two of the mailboxes to another mailstore with the same results. Any suggestions a welcome. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist ** ** -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Outlook 2003 Exchange 2010 SP1 help
no messages are displayed On Thu, Jun 14, 2012 at 4:52 PM, Steve Hart sh...@wrightbg.com wrote: ** Do you mean that the messages show delivered or that the messages don’t show up at all? ** ** ***Steve Hart*** Network **Administrator** 503.491.4343 -Direct | 503.492.8160 - Fax -- *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, June 14, 2012 2:48 PM *To:* **MS-Exchange Admin Issues ** *Subject:* Re: Outlook 2003 Exchange 2010 SP1 help ** ** nothing On Thu, Jun 14, 2012 at 3:43 PM, **Steve Hart** sh...@wrightbg.com wrote: Was does message tracking show? ***Steve Hart*** Network **Administrator** 503.491.4343 -Direct | 503.492.8160 - Fax -- *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, June 14, 2012 11:59 AM *To:* **MS-Exchange Admin Issues** *Subject:* Re: Outlook 2003 Exchange 2010 SP1 help NO On Thu, Jun 14, 2012 at 12:08 PM, Michael B. Smith mich...@smithcons.com wrote: Does the email appear in OWA? *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, June 14, 2012 12:41 PM *To:* **MS-Exchange Admin Issues** *Subject:* Outlook 2003 Exchange 2010 SP1 help I have several mailboxes that do not receive email sent inside the Exchange organization, all are Outlook 2003. I have tried changing the security setting for the connection to Exchange 2010, to require an encrypted connection. Deleted the outlook profile and rebuilt it. None of these worked. I had the raid 5 set that housed the mail stores fail, Two drives failed. After getting new raid controller card 1 hard drive, restored all of the mailstores from the previous evening. Did not have to restore Exchange itself. Did not trust the hardware, decided to virtualize to NMware. Did a P2V to a ESXi 4.1 host powered up and has been working OK since. I have also moved two of the mailboxes to another mailstore with the same results. Any suggestions a welcome. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist ** ** -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: RIM BlackBerry services open up to iOS, Android
You can look into Mobile Iron for iPhone and Android On Tue, Nov 29, 2011 at 11:56 AM, N Parr npar...@mortonind.com wrote: ** Hmm, so do I continue to investigate an alternative solution like Good for my non BB devices. Or wait a few month for a most likely buggy, feature lacking release of this. Considering myself, and probably a lot of other companies, have extra BB licenses on their server that can be used because of users moving to other devices. http://news.cnet.com/8301-1035_3-57332782-94/rim-blackberry-services-open-up-to-ios-android/?part=rsssubj=newstag=2547-1_3-0-20tag=nl.e703 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: OWA question
I believe no, as the form only comes from TMG. Not sure you would want to have your internal users access TMG from the external interface. It my work by copying the HTM files from the TMG to your CAS IIS directory and rebuild the VDir. Have not see this to work. On Thu, Nov 17, 2011 at 1:36 PM, Joseph Heaton jhea...@dfg.ca.gov wrote: I'm setting up an OWA listener in TMG. The blog I'm following says to turn off FBA in the Exchange console, and let TMG do the forms based authentication. But, if I do this, then users internally hitting the OWA site don't get forms based auth, just the normal authentication window that comes up connecting to any network resource. Is there a way to have both, without making the external users log in twice? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Public Folder item purge
We had a Exchange 2003 Public folder that has 51,000 items in it. I have finally gotten permissions to clean it out. But the users purge criteria calls for one of the date fields to be valued and be between 365 days and 730 days. Can this be scripted and how? -- Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 Disk Configuration
Have a look/read here : http://blogs.technet.com/b/exchange/archive/2011/01/07/robert-s-rules-of-exchange-storage-planning-and-testing.aspx On Tue, Aug 2, 2011 at 8:06 AM, McCready, Rob rob.mccrea...@dplinc.comwrote: Greetings Gurus, We currently have 400GB worth of data on our Exchange 2007 setup. From what I’ve read, we can expect that to double or triple when we move to Exchange 2010 and lose single instance storage. What type of disk configuration are you using for 2010? Local disks or a SAN? Thanks, ** ** ** ** ** ** ** ** --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
How to exmerge/export a mailbox 2GB
Have an e-discovery request on a user that has an 8 GB mailbox (Exchange 2003). Can I use a Exchange 2007 CAS to export the mailbox to a pst. Or do I need a third party application. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: How to exmerge/export a mailbox 2GB
Thanks, does this script remove the mail items or does a copy. On Fri, Jul 29, 2011 at 2:18 PM, Kurt Buff kurt.b...@gmail.com wrote: MBS has a script that uses exmerge to export multiple PST files of sizes less than 2gb, by date range. http://theessentialexchange.com/blogs/michael/archive/2009/10/16/exporting-mailboxes-larger-than-2-gb-on-an-exchange-server.aspx Kurt On Fri, Jul 29, 2011 at 11:48, Todd Lemmiksoo tlemmik...@gmail.comwrote: Have an e-discovery request on a user that has an 8 GB mailbox (Exchange 2003). Can I use a Exchange 2007 CAS to export the mailbox to a pst. Or do I need a third party application. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Local delivery queue slow again today....Exchange 2003
This afternoon the Local Delivery queue is slow again (same as yesterday afternoon). All the performance counters look OK. Stopped outbound mail for a while with no effect. Should I try moving the working directory to another drive ( all are 15K drives on a DELL MD3000 DAS). And some users are complaining about slow Outlook. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Local delivery queue slow again today....Exchange 2003
One server 4 SG and 19 MS. RPC packets/sec are 30 with a max of 145. To my see all coutner look with in reason. When you say path, ? On Thu, Jul 28, 2011 at 2:41 PM, KevinM kev...@wlkmmas.org wrote: All in one server? Are you looking at perfmon on the HUB or MBX? – what counters are good ? – What about RPC on the MBX server? ** ** Where are things slow in the path ? ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, July 28, 2011 12:18 PM *To:* MS-Exchange Admin Issues *Subject:* Local delivery queue slow again todayExchange 2003 ** ** This afternoon the Local Delivery queue is slow again (same as yesterday afternoon). All the performance counters look OK. Stopped outbound mail for a while with no effect. Should I try moving the working directory to another drive ( all are 15K drives on a DELL MD3000 DAS). And some users are complaining about slow Outlook. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Slow local delivery on Exchange 2003
Local delivery queue has items being delayed and queuing up. seeing avg disk que lnth for the working directory drive of 1027 and max of 1333. Can anything be done to relieve the queuing? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Slow local delivery on Exchange 2003
LOL, you have me LOL. Thanks for bring me back. Management here has such a small tolerance for any issue with email at the hospital. On Wed, Jul 27, 2011 at 4:55 PM, Michael B. Smith mich...@smithcons.comwrote: Stop the smtp service? ** ** Regards, ** ** Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Wednesday, July 27, 2011 4:39 PM *To:* MS-Exchange Admin Issues *Subject:* Slow local delivery on Exchange 2003 ** ** Local delivery queue has items being delayed and queuing up. seeing avg disk que lnth for the working directory drive of 1027 and max of 1333. Can anything be done to relieve the queuing? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: RE: RE: Ex2007 mailbox deletion/recreation question - LegacyExchangeDN X500
://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto: listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- Jonathan, A+, MCSA, MCSE --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Exchange 2003 question on Master router change.
I'm in the process of planning the removal of our first Exchange 2003 server from the Exchange organization. When I make the change to which server is the Master router. Will this cause an outage to the user base. I would like to do this change ahead of time. I have already added the new server to the MX records for the domain. All mailboxes have been moved and mailstores deleted except for the mailstore that houses the System Attendant mailbox. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 question on Master router change.
No I have not. Just add the new server to the smarthost SMTP connector. Or create a new one with just the new server as the local bridgehead? On Fri, Jul 8, 2011 at 10:06 AM, Michael B. Smith mich...@smithcons.comwrote: Have you updated your SMTP Connector? Or created a new one for the new server? Once that is done, changing the routing master should have no effect. ** ** Regards, ** ** Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, July 08, 2011 10:36 AM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2003 question on Master router change. ** ** I'm in the process of planning the removal of our first Exchange 2003 server from the Exchange organization. When I make the change to which server is the Master router. Will this cause an outage to the user base. I would like to do this change ahead of time. I have already added the new server to the MX records for the domain. All mailboxes have been moved and mailstores deleted except for the mailstore that houses the System Attendant mailbox. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 question on Master router change.
Thanks! On Fri, Jul 8, 2011 at 10:48 AM, Michael B. Smith mich...@smithcons.comwrote: Either one of those will work fine. ** ** In the Exchange 2003 timeframe, I usually preferred to have a connector-per-server. Today (2007/2010 timeframe) a connector-per-AD-site is what I usually do. ** ** Regards, ** ** Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com ** ** *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, July 08, 2011 11:45 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2003 question on Master router change. ** ** No I have not. Just add the new server to the smarthost SMTP connector. Or create a new one with just the new server as the local bridgehead? On Fri, Jul 8, 2011 at 10:06 AM, Michael B. Smith mich...@smithcons.com wrote: Have you updated your SMTP Connector? Or created a new one for the new server? Once that is done, changing the routing master should have no effect. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, July 08, 2011 10:36 AM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2003 question on Master router change. I'm in the process of planning the removal of our first Exchange 2003 server from the Exchange organization. When I make the change to which server is the Master router. Will this cause an outage to the user base. I would like to do this change ahead of time. I have already added the new server to the MX records for the domain. All mailboxes have been moved and mailstores deleted except for the mailstore that houses the System Attendant mailbox. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
IS the storage limit per mailbox limited to 2GB?
I am in the process of implementing mailbox quotes for NOSEND. Management wants me to override the Mailstore setting for a number of accounts. When I go into ADUC to input a limit for a user I get a message the says to input a value from 0 to 2097151. Can I change the upper limit value somewhere? I need to be able to allow a limit greater than 2 GB. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: IS the storage limit per mailbox limited to 2GB?
I found my answer have to use ADSIedit to input a larger value in AD. On Thu, Jun 30, 2011 at 8:19 AM, Todd Lemmiksoo tlemmik...@gmail.comwrote: I am in the process of implementing mailbox quotes for NOSEND. Management wants me to override the Mailstore setting for a number of accounts. When I go into ADUC to input a limit for a user I get a message the says to input a value from 0 to 2097151. Can I change the upper limit value somewhere? I need to be able to allow a limit greater than 2 GB. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 Crisis
The 8000 messages are for a bad appointment in his calendar. He needs to delete (remove) the appointment and re-enter it. It will cause more problems the long it is in his calendar. The ESE messages are informational, and appear then Exchange maintenance runs. On Mon, Jun 13, 2011 at 11:23 AM, Jim Dandy jda...@asmail.ucdavis.eduwrote: Thanks for your response back Here are some event log entries that may be of interest There are a bunch of these. Although they may be more frequent, they aren’t new. It’s been happening for years. They are always in the early AM – perhaps backup related? Source: ESE Category: General Event ID: 101 Description: ESEUTIL (6048) The database engine stopped. Source: ESE Category: General Event ID: 100 Description: ESEUTIL (5372) The database engine 6.05.7638.0002 started. These have occurred in the past but not frequently. He uses an iPhone. I suppose it could have something to do with it. My concern is that these might be generated if the IS is corrupted and looses the time of an appointment? Source: EXCDO Category: General EventID: 8206 Description: Calendaring agent failed with error code 0x80040229 while saving appointment. Source: EXCDO Category: General EventID: 8239 Description: An appointment with the subject Working Group Mtg. was saved to mailbox myu...@ucdavis.edu. The start time is missing, so the calendaring agent cannot publish the free/busy information for this appointment. To correct this, please delete the appointment and recreate it. Source: EXCDO Category: General EventID: 8241 Description: An existing appointment with the subject Working Group Mtg. in mailbox myu...@ucdavis.edu was modified. The start time, or both the duration and end time of the existing appointment were missing. Other than that, there isn’t anything out of the ordinary in the logs – certainly nothing really scary like your “Your IS is corrupt” or even “an IS error was detected and resolved.” Curt *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Sunday, June 12, 2011 8:15 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2003 Crisis before trying to do anything ...is the store still mounded, look in event log for Information store messages. Then post back On Sun, Jun 12, 2011 at 1:13 AM, Jim Dandy jda...@asmail.ucdavis.edu wrote: Thursday morning I came to work and my exchange server was not receiving mail. The antivirus engine had stopped and after that the event log registered thousands of entries that the Ninja VSAPI had refused Microsoft Exchange InfoStore request to scan a message because the Ninja Store Scanner is down. (I’m using Vipre E-mail Security for antivirus/antispam). No other unusual entries were found in the event log. I rebooted the server and it took a really long time to shut down. When it came back up the Ninja Store scanner service was not started but I was able to start it manually. Without going into a lot more detail I’ll just say the info store wasn’t working right. Subsequent attempts to stop the IS service failed. I disabled Vipre, rebooted again and everything resumed normal function (except no antivirus/antispam). I updated Vipre and reenabled its services. The following morning the server had crashed in the same way. When it crashes messages are not delivered to inboxes and the sender does not get an NDR. Since then I’ve had a user claim that he tried to move some messages from one folder to another and they disappeared. Later he told me that he had an important message in his inbox and when he tried to open it, it disappeared. So, the questions I have are 1) Could a corrupt info store cause the av scanner to fail like this? If so, how can I check for/repair the store? 2) Does this guy’s claims seem possible that messages are just disappearing? Details Exchange Server 2003 with both front and backend servers. Vipre E-mail security latest version. Thanks for your help. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 Crisis
To do any testing you would dismount the store and use eseutil. On Mon, Jun 13, 2011 at 3:30 PM, Jim Dandy jda...@asmail.ucdavis.eduwrote: Is there a way to test for a corrupt info store or can I just assume since there aren’t any unusual messages in the logs that the info store is OK? Curt *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Monday, June 13, 2011 10:13 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2003 Crisis The 8000 messages are for a bad appointment in his calendar. He needs to delete (remove) the appointment and re-enter it. It will cause more problems the long it is in his calendar. The ESE messages are informational, and appear then Exchange maintenance runs. On Mon, Jun 13, 2011 at 11:23 AM, Jim Dandy jda...@asmail.ucdavis.edu wrote: Thanks for your response back Here are some event log entries that may be of interest There are a bunch of these. Although they may be more frequent, they aren’t new. It’s been happening for years. They are always in the early AM – perhaps backup related? Source: ESE Category: General Event ID: 101 Description: ESEUTIL (6048) The database engine stopped. Source: ESE Category: General Event ID: 100 Description: ESEUTIL (5372) The database engine 6.05.7638.0002 started. These have occurred in the past but not frequently. He uses an iPhone. I suppose it could have something to do with it. My concern is that these might be generated if the IS is corrupted and looses the time of an appointment? Source: EXCDO Category: General EventID: 8206 Description: Calendaring agent failed with error code 0x80040229 while saving appointment. Source: EXCDO Category: General EventID: 8239 Description: An appointment with the subject Working Group Mtg. was saved to mailbox myu...@ucdavis.edu. The start time is missing, so the calendaring agent cannot publish the free/busy information for this appointment. To correct this, please delete the appointment and recreate it. Source: EXCDO Category: General EventID: 8241 Description: An existing appointment with the subject Working Group Mtg. in mailbox myu...@ucdavis.edu was modified. The start time, or both the duration and end time of the existing appointment were missing. Other than that, there isn’t anything out of the ordinary in the logs – certainly nothing really scary like your “Your IS is corrupt” or even “an IS error was detected and resolved.” Curt *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Sunday, June 12, 2011 8:15 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2003 Crisis before trying to do anything ...is the store still mounded, look in event log for Information store messages. Then post back On Sun, Jun 12, 2011 at 1:13 AM, Jim Dandy jda...@asmail.ucdavis.edu wrote: Thursday morning I came to work and my exchange server was not receiving mail. The antivirus engine had stopped and after that the event log registered thousands of entries that the Ninja VSAPI had refused Microsoft Exchange InfoStore request to scan a message because the Ninja Store Scanner is down. (I’m using Vipre E-mail Security for antivirus/antispam). No other unusual entries were found in the event log. I rebooted the server and it took a really long time to shut down. When it came back up the Ninja Store scanner service was not started but I was able to start it manually. Without going into a lot more detail I’ll just say the info store wasn’t working right. Subsequent attempts to stop the IS service failed. I disabled Vipre, rebooted again and everything resumed normal function (except no antivirus/antispam). I updated Vipre and reenabled its services. The following morning the server had crashed in the same way. When it crashes messages are not delivered to inboxes and the sender does not get an NDR. Since then I’ve had a user claim that he tried to move some messages from one folder to another and they disappeared. Later he told me that he had an important message in his inbox and when he tried to open it, it disappeared. So, the questions I have are 1) Could a corrupt info store cause the av scanner to fail like this? If so, how can I check for/repair the store? 2) Does this guy’s claims seem possible that messages are just disappearing? Details Exchange Server 2003 with both front and backend servers. Vipre E-mail security latest version. Thanks for your help. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http
Re: Exchange 2003 Crisis
before trying to do anything ...is the store still mounded, look in event log for Information store messages. Then post back On Sun, Jun 12, 2011 at 1:13 AM, Jim Dandy jda...@asmail.ucdavis.eduwrote: Thursday morning I came to work and my exchange server was not receiving mail. The antivirus engine had stopped and after that the event log registered thousands of entries that the Ninja VSAPI had refused Microsoft Exchange InfoStore request to scan a message because the Ninja Store Scanner is down. (I’m using Vipre E-mail Security for antivirus/antispam). No other unusual entries were found in the event log. I rebooted the server and it took a really long time to shut down. When it came back up the Ninja Store scanner service was not started but I was able to start it manually. Without going into a lot more detail I’ll just say the info store wasn’t working right. Subsequent attempts to stop the IS service failed. I disabled Vipre, rebooted again and everything resumed normal function (except no antivirus/antispam). I updated Vipre and reenabled its services. The following morning the server had crashed in the same way. When it crashes messages are not delivered to inboxes and the sender does not get an NDR. Since then I’ve had a user claim that he tried to move some messages from one folder to another and they disappeared. Later he told me that he had an important message in his inbox and when he tried to open it, it disappeared. So, the questions I have are 1) Could a corrupt info store cause the av scanner to fail like this? If so, how can I check for/repair the store? 2) Does this guy’s claims seem possible that messages are just disappearing? Details Exchange Server 2003 with both front and backend servers. Vipre E-mail security latest version. Thanks for your help. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 - Creating a new storage group and moving mailboxes
Did they create the SG on a different server or on the same server in a different Org? Need more details. On Thu, Jun 9, 2011 at 10:44 AM, Eric seag...@gmail.com wrote: One of my clients attempted to create a new storage group and move mailboxes to this new storage group. Its been a while since I worked with Exchange 2003 and haven't done this before so I was wondering if anyone could point me to a good article or resource that outlines the proper way to create a new storage group and move mailboxes. I'd like to have a better understanding of this process so I can more efficiently assit them. They are reporting problems with the GAL not updating and recipient policies not functioning properly. Any help would be appreciated. Thanks! Eric --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 - Creating a new storage group and moving mailboxes
OFF-LOADED??? Did they use the Move Mailbox Wiz? If not that is the problem. On Thu, Jun 9, 2011 at 1:03 PM, Eric seag...@gmail.com wrote: Good questions. Yes this is on the same server. They just created a new storage group and offloaded the mailboxes from the default storage group. Thanks, Eric On Thu, Jun 9, 2011 at 10:31 AM, Todd Lemmiksoo tlemmik...@gmail.comwrote: Did they create the SG on a different server or on the same server in a different Org? Need more details. On Thu, Jun 9, 2011 at 10:44 AM, Eric seag...@gmail.com wrote: One of my clients attempted to create a new storage group and move mailboxes to this new storage group. Its been a while since I worked with Exchange 2003 and haven't done this before so I was wondering if anyone could point me to a good article or resource that outlines the proper way to create a new storage group and move mailboxes. I'd like to have a better understanding of this process so I can more efficiently assit them. They are reporting problems with the GAL not updating and recipient policies not functioning properly. Any help would be appreciated. Thanks! Eric --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Exchange 2003 Powershell help
I need to produce a report listing all mailboxes with display name, storage group, Mailstore, size, last logged on time, sam account and last logged on by. I can not get the sam account or last logged on by account to be selected for the report. Any help is greatly appreciated. Get-Wmiobject -Namespace root\MicrosoftExchangeV2 -Class Exchange_Mailbox -ComputerName $computer | Sort-Object -Descending MailboxDisplayName | Select-Object MailboxDisplayName,StorageGroupName,StoreName,Size,LastLogonAcount,LastLogonTime | Export-Csv -Path d:\scripts\browning08.csv } -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 Powershell help
Thanks, I will work on it tonight. On Wed, Jun 8, 2011 at 4:54 PM, Michael B. Smith mich...@smithcons.comwrote: I don’t think you can get everything you want from a single source. First, I’ll refer you to a script I wrote: http://theessentialexchange.com/blogs/michael/archive/2007/11/13/a-script-for-getting-mailbox-sizes-using-wmi-in-powershell.aspx Then a scriptcenter article that displays everything you can get from Exchange_Mailbox: http://gallery.technet.microsoft.com/scriptcenter/fcf4fe8b-2260-4382-aee5-d737f6cb6627 Between the two you should be able to get everything you want. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Wednesday, June 08, 2011 5:23 PM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2003 Powershell help I need to produce a report listing all mailboxes with display name, storage group, Mailstore, size, last logged on time, sam account and last logged on by. I can not get the sam account or last logged on by account to be selected for the report. Any help is greatly appreciated. Get-Wmiobject -Namespace root\MicrosoftExchangeV2 -Class Exchange_Mailbox -ComputerName $computer | Sort-Object -Descending MailboxDisplayName | Select-Object MailboxDisplayName,StorageGroupName,StoreName,Size,LastLogonAcount,LastLogonTime | Export-Csv -Path d:\scripts\browning08.csv } -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Exchange mailstore size question
Is there another way to shrink the size of a mailstore other than taking it off-line and esutil it? I am in the process of decommission'g a server but not ready to delete the mailstore that houses the System Attend mailbox. Getting pressure to return the SAN storage. Need to reduce the size of the EDB file to move it to local disk, all mailboxes have been moved off of the mailstore to another server. Would creating a new storage group and moving the mailstore to it reduce the actual size? Current size is 190 GB plus 89 GB for the STM. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Anyone use PowerPoof before
I am trying to PowerPoof a number of users calendars. I get error code 0x8004010F cannot find calendar. I have tried another account that is just a domain admin and my account with the same error. Google has not helped! -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Anyone hear of any ATT outage in southern Alabama?
Yes, we did. Was able to get the CEO working by having him move outside of the condo. On Fri, May 27, 2011 at 11:54 AM, Koivisto, Steve steve.koivi...@goracine.org wrote: Have you tried calling ATT to verify an outage? *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Friday, May 27, 2011 11:45 AM *To:* MS-Exchange Admin Issues *Subject:* Anyone hear of any ATT outage in southern Alabama? Our CEO cannot send email or connect to internet from his iPhone. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 SP3?
Which ActiveSync hotfix? On Thu, May 26, 2011 at 6:31 AM, Paul Hutchings paul.hutchi...@mira.co.ukwrote: Exchange 2003 SP2 was the last service pack wasn’t it? Doing this migration and I just came to download the ActiveSync hotfix for our 2003 boxes and the Microsoft website suggests it is for 2003 SP3 whilst http://technet.microsoft.com/en-us/exchange/bb288482.aspx only seems to show SP2. Not going mad am I? Paul -- *MIRA Ltd* Watling Street, Nuneaton, Warwickshire, CV10 0TU, England Registered in England and Wales No. 402570 VAT Registration GB 100 1464 84 The contents of this e-mail are confidential and are solely for the use of the intended recipient. If you receive this e-mail in error, please delete it and notify us either by e-mail, telephone or fax. You should not copy, forward or otherwise disclose the content of the e-mail as this is prohibited. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2003 SP3?
Yes, it means post SP2. I made that change manually. On Thu, May 26, 2011 at 7:49 AM, Paul Hutchings paul.hutchi...@mira.co.ukwrote: http://support.microsoft.com/?kbid=937031 When you go to download it it shows as “sp3”. It may be that they mean “post-SP2” and I’ve simply misinterpreted their terminology. *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* 26 May 2011 13:48 *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2003 SP3? Which ActiveSync hotfix? On Thu, May 26, 2011 at 6:31 AM, Paul Hutchings paul.hutchi...@mira.co.uk wrote: Exchange 2003 SP2 was the last service pack wasn’t it? Doing this migration and I just came to download the ActiveSync hotfix for our 2003 boxes and the Microsoft website suggests it is for 2003 SP3 whilst http://technet.microsoft.com/en-us/exchange/bb288482.aspx only seems to show SP2. Not going mad am I? Paul -- *MIRA Ltd* Watling Street, Nuneaton, Warwickshire, CV10 0TU, England Registered in England and Wales No. 402570 VAT Registration GB 100 1464 84 The contents of this e-mail are confidential and are solely for the use of the intended recipient. If you receive this e-mail in error, please delete it and notify us either by e-mail, telephone or fax. You should not copy, forward or otherwise disclose the content of the e-mail as this is prohibited. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Question on moving public folders vs replication
Using ESM , click on Public folder instances all tasks change server. Would this be wrong? On Wed, May 11, 2011 at 3:46 PM, Michael B. Smith mich...@smithcons.comwrote: How, pray tell, would you “move them”? Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Wednesday, May 11, 2011 4:44 PM *To:* MS-Exchange Admin Issues *Subject:* Question on moving public folders vs replication In my planning for decommissioning the first Exchange 2003 server have come to what to do with Public Folders. Should I move the Public Folders to the replacement server or just replicate them. Is one way better then the other? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: BES - Lookup Failed?
/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Moving Mailstores in Exchange 2003
I am in the process of building a new Exchange 2003 EE box (don't ask). It will replace our current Exchange 2003 box as we have had problems with the box. I have read that it possible to move a mailstore from one Exchange server to another Exchange server instead of doing individual mailbox moves. Has any one done this or any suggest as to what to watch out for. This would save a lot of time as I would be moving about 1700 mailboxes in total from 4 storage groups. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Moving Mailstores in Exchange 2003
Thanks for all of the comments and links. I had not come across the part about re-homing the mailboxes. This I would not like to do for 1700 mailboxes. The mailstore reorg of mailboxes is already being planned as I want to get the stores down to about 100 GB each. On Wed, Apr 20, 2011 at 9:36 AM, Ellis, John P. johnel...@wirral.gov.ukwrote: We went through this last year. We built some new Ex2k3 servers and then used the ESM to move the mailboxes over night. This gave us fresh information stores, no white space and helped reduce mailbox sizes, because the recoverable deleted items dont get moved across We had around 4500 mailboxes and had very few issues scheduling them out of hours with much interuption to users. HTH John -- *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* 20 April 2011 14:43 *To:* MS-Exchange Admin Issues *Subject:* Moving Mailstores in Exchange 2003 I am in the process of building a new Exchange 2003 EE box (don't ask). It will replace our current Exchange 2003 box as we have had problems with the box. I have read that it possible to move a mailstore from one Exchange server to another Exchange server instead of doing individual mailbox moves. Has any one done this or any suggest as to what to watch out for. This would save a lot of time as I would be moving about 1700 mailboxes in total from 4 storage groups. -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.clearswift.com ** --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2007 CAS as front end for Exchange 2003
Thanks. Management refuses to consider going to Exchange 2007 or 2010 for cost (licenses). How do I fix calendar sync issues with iPhones. Already tried to open a case with MS. On Thu, Mar 24, 2011 at 11:48 AM, Michael B. Smith mich...@smithcons.comwrote: +1 Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com http://theessentialexchange.com/ -- *From:* Sobey, Richard A [r.so...@imperial.ac.uk] *Sent:* Thursday, March 24, 2011 12:30 PM *To:* MS-Exchange Admin Issues *Subject:* RE: Exchange 2007 CAS as front end for Exchange 2003 If anything you may get more issues doing it that way. Personally speaking, it’s always preferable to use the same CAS version as MBX version, so if you’re not moving mailboxes to 2007 too, I’d forget adding a 2007 CAS and focus on fixing the issue. But, it is of course possible J *From:* bounce-9304784-8066...@lyris.sunbelt-software.com [mailto: bounce-9304784-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 24 March 2011 16:01 *To:* MS-Exchange Admin Issues *Subject:* Exchange 2007 CAS as front end for Exchange 2003 We are having problems with iPhone calendar sync'g with Exchange 2003 and Activesync. One of the options we are looking at is to add a Exchange 2007 CAS to replace the Exchange 2003 OWA box. Are there any problems that anyone has come up against with this type of environment. Is this a bad idea? Best practices? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2007 CAS as front end for Exchange 2003
Appointments in Outlook do not show up in iPhone; not all just some. Have requested the executives to not accept or create appointments on the phone, just in Outlook. On Thu, Mar 24, 2011 at 1:14 PM, sms adm sms...@gmail.com wrote: What problems specifically? On Thu, Mar 24, 2011 at 2:09 PM, Todd Lemmiksoo tlemmik...@gmail.comwrote: Thanks. Management refuses to consider going to Exchange 2007 or 2010 for cost (licenses). How do I fix calendar sync issues with iPhones. Already tried to open a case with MS. On Thu, Mar 24, 2011 at 11:48 AM, Michael B. Smith mich...@smithcons.com wrote: +1 Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com http://theessentialexchange.com/ -- *From:* Sobey, Richard A [r.so...@imperial.ac.uk] *Sent:* Thursday, March 24, 2011 12:30 PM *To:* MS-Exchange Admin Issues *Subject:* RE: Exchange 2007 CAS as front end for Exchange 2003 If anything you may get more issues doing it that way. Personally speaking, it’s always preferable to use the same CAS version as MBX version, so if you’re not moving mailboxes to 2007 too, I’d forget adding a 2007 CAS and focus on fixing the issue. But, it is of course possible J *From:* bounce-9304784-8066...@lyris.sunbelt-software.com [mailto: bounce-9304784-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 24 March 2011 16:01 *To:* MS-Exchange Admin Issues *Subject:* Exchange 2007 CAS as front end for Exchange 2003 We are having problems with iPhone calendar sync'g with Exchange 2003 and Activesync. One of the options we are looking at is to add a Exchange 2007 CAS to replace the Exchange 2003 OWA box. Are there any problems that anyone has come up against with this type of environment. Is this a bad idea? Best practices? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- smsadm --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2007 CAS as front end for Exchange 2003
iOS 4.2.? Recurring and single appointments. A couple of users iPhone's have been reset, do not know about telling the iPhone to not sync the calendar and then enable it. I do not get to handle the phone physically, these users are hospital execs. The Activesync has been rebuild from scratch as we had to rebuild the server 2 1/2 weeks ago. And restore the store DB's. The calendar issues existed before the rebuild. store.exe is 6.5.7655.7 MS Support already told me to contact Apple. Did not know Apple would not open a case. On Thu, Mar 24, 2011 at 1:45 PM, Knoch, James W james.kn...@intergraph.comwrote: What version of iOS? What type of appointments (Recurring? Single Instance?)? What happens if you tell the iPhone to not sync the calendar and then re-enable it? How about if you redo the Activesync connection entirely? What version is your store.exe? There have been various ActiveSync hotfixes in the past few years that may help. My 2003 store.exe is at 6.5.7655.5 and was prior to our Exchange 2010 migration. We had minimal iPhone issues besides a specific overload issue due to iOS4 when it was first released. I have to run to an appointment, so I can’t tell you what hotfixes I have installed in my 2003 environment at the moment. MS Support will tell you to contact Apple. Unfortunately Apple will not want to support the issue since 2003 is EOL. *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, March 24, 2011 1:23 PM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2007 CAS as front end for Exchange 2003 Appointments in Outlook do not show up in iPhone; not all just some. Have requested the executives to not accept or create appointments on the phone, just in Outlook. On Thu, Mar 24, 2011 at 1:14 PM, sms adm sms...@gmail.com wrote: What problems specifically? On Thu, Mar 24, 2011 at 2:09 PM, Todd Lemmiksoo tlemmik...@gmail.com wrote: Thanks. Management refuses to consider going to Exchange 2007 or 2010 for cost (licenses). How do I fix calendar sync issues with iPhones. Already tried to open a case with MS. On Thu, Mar 24, 2011 at 11:48 AM, Michael B. Smith mich...@smithcons.com wrote: +1 Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com http://theessentialexchange.com/ -- *From:* Sobey, Richard A [r.so...@imperial.ac.uk] *Sent:* Thursday, March 24, 2011 12:30 PM *To:* MS-Exchange Admin Issues *Subject:* RE: Exchange 2007 CAS as front end for Exchange 2003 If anything you may get more issues doing it that way. Personally speaking, it’s always preferable to use the same CAS version as MBX version, so if you’re not moving mailboxes to 2007 too, I’d forget adding a 2007 CAS and focus on fixing the issue. But, it is of course possible J *From:* bounce-9304784-8066...@lyris.sunbelt-software.com [mailto: bounce-9304784-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 24 March 2011 16:01 *To:* MS-Exchange Admin Issues *Subject:* Exchange 2007 CAS as front end for Exchange 2003 We are having problems with iPhone calendar sync'g with Exchange 2003 and Activesync. One of the options we are looking at is to add a Exchange 2007 CAS to replace the Exchange 2003 OWA box. Are there any problems that anyone has come up against with this type of environment. Is this a bad idea? Best practices? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- smsadm --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http
Re: Exchange 2007 CAS as front end for Exchange 2003
Thanks Micheal! On Thu, Mar 24, 2011 at 5:21 PM, Michael B. Smith mich...@smithcons.comwrote: Long story short – don’t accept or modify any appointments – ESPECIALLY recurring appointments on an iOS device unless you are running Exchange 2010. iOS expects a minimum of ActiveSync v14 (Exchange 2010 RTM). I believe, in fact, that apple support will tell you that modifying or accepting appointments is not supported unless you are running Exchange 2010. AT least, that was the party line a few months ago. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, March 24, 2011 3:41 PM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2007 CAS as front end for Exchange 2003 iOS 4.2.? Recurring and single appointments. A couple of users iPhone's have been reset, do not know about telling the iPhone to not sync the calendar and then enable it. I do not get to handle the phone physically, these users are hospital execs. The Activesync has been rebuild from scratch as we had to rebuild the server 2 1/2 weeks ago. And restore the store DB's. The calendar issues existed before the rebuild. store.exe is 6.5.7655.7 MS Support already told me to contact Apple. Did not know Apple would not open a case. On Thu, Mar 24, 2011 at 1:45 PM, Knoch, James W james.kn...@intergraph.com wrote: What version of iOS? What type of appointments (Recurring? Single Instance?)? What happens if you tell the iPhone to not sync the calendar and then re-enable it? How about if you redo the Activesync connection entirely? What version is your store.exe? There have been various ActiveSync hotfixes in the past few years that may help. My 2003 store.exe is at 6.5.7655.5 and was prior to our Exchange 2010 migration. We had minimal iPhone issues besides a specific overload issue due to iOS4 when it was first released. I have to run to an appointment, so I can’t tell you what hotfixes I have installed in my 2003 environment at the moment. MS Support will tell you to contact Apple. Unfortunately Apple will not want to support the issue since 2003 is EOL. *From:* Todd Lemmiksoo [mailto:tlemmik...@gmail.com] *Sent:* Thursday, March 24, 2011 1:23 PM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2007 CAS as front end for Exchange 2003 Appointments in Outlook do not show up in iPhone; not all just some. Have requested the executives to not accept or create appointments on the phone, just in Outlook. On Thu, Mar 24, 2011 at 1:14 PM, sms adm sms...@gmail.com wrote: What problems specifically? On Thu, Mar 24, 2011 at 2:09 PM, Todd Lemmiksoo tlemmik...@gmail.com wrote: Thanks. Management refuses to consider going to Exchange 2007 or 2010 for cost (licenses). How do I fix calendar sync issues with iPhones. Already tried to open a case with MS. On Thu, Mar 24, 2011 at 11:48 AM, Michael B. Smith mich...@smithcons.com wrote: +1 Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com http://theessentialexchange.com/ -- *From:* Sobey, Richard A [r.so...@imperial.ac.uk] *Sent:* Thursday, March 24, 2011 12:30 PM *To:* MS-Exchange Admin Issues *Subject:* RE: Exchange 2007 CAS as front end for Exchange 2003 If anything you may get more issues doing it that way. Personally speaking, it’s always preferable to use the same CAS version as MBX version, so if you’re not moving mailboxes to 2007 too, I’d forget adding a 2007 CAS and focus on fixing the issue. But, it is of course possible J *From:* bounce-9304784-8066...@lyris.sunbelt-software.com [mailto: bounce-9304784-8066...@lyris.sunbelt-software.com] *On Behalf Of *Todd Lemmiksoo *Sent:* 24 March 2011 16:01 *To:* MS-Exchange Admin Issues *Subject:* Exchange 2007 CAS as front end for Exchange 2003 We are having problems with iPhone calendar sync'g with Exchange 2003 and Activesync. One of the options we are looking at is to add a Exchange 2007 CAS to replace the Exchange 2003 OWA box. Are there any problems that anyone has come up against with this type of environment. Is this a bad idea? Best practices? -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- T. Todd Lemmiksoo --- To manage subscriptions click here: http://lyris.sunbelt
RE: No Emails since Friday
I have received a few yesterday and 1 today. Todd Lemmiksoo From: Carol Fee [mailto:c...@massbar.org] Sent: Tuesday, March 09, 2010 10:02 AM To: MS-Exchange Admin Issues Subject: No Emails since Friday Have there been any posts to this list ? Carol Fee Network Administrator 617-338-0623 c...@massbar.org mailto:c...@massbar.org Massachusetts Bar Association 20 West Street Boston, MA 02111-1204 (617) 338-0500 image001.gif
