RE: EXCHANGE 2010 SP2 UR3 two node DAG and 1 FileShare witness server
You should not use FCM for Exchange. Use Get-DatabaseAvailabilityGroup -status and Get-DatabaseAvailabilityGroupNetwork. From: xyz [mailto:x...@minneapolis.edu] Sent: Wednesday, January 23, 2013 10:17 PM To: MS-Exchange Admin Issues Subject: EXCHANGE 2010 SP2 UR3 two node DAG and 1 FileShare witness server Greetings W2K8 R2 SP1 EXCHANGE 2010 SP2 UR3 two node DAG and 1 FileShare witness server for quorum. Very simple configurations as listed above and has been working for a couple of years with no changes. Recently, when we tried to roll DBs on the DAG for MS UPDATES, we found our witness server was not working even though it was on line so we were stuck. We determined that the FileShare witness server directory had lost all rights for unknown reasons so even though the witness server was on line, the failover cluster could not properly access the witness server directory. We recreated all the folder rights and eventually got everything working - so far with no errors. My question is how can we proactively monitor the quorum status to make sure it is all working? Failover Cluster Manager DAG1 shows Quorum Configuration and shows the proper path to the witness server. Failover Cluster Manager NODES shows both our EXCHANGE servers up. Failover Cluster Manager NETWORKS shows both our EXCHANGE servers up. What I cannot find yet in the Failover Cluster Manager GUI is where we verify the witness server is up at the application witness server level? (We know the witness server is up and running as it is a DC.) Am I missing another GUI screen? Is there any non-invasive command line to check to make sure all three hosts are responding and on line for a quorum? Thanks for any suggestions. Dana --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 which rollup
The message in the KB is actually telling you that the native image thing is normal, but if you don't have internet connectivity, you can't do that step, but it takes time for the request to time out, which causes the extreme length of time for the install. From: gsaunders.myitanal...@gmail.com [mailto:gsaunders.myitanal...@gmail.com] On Behalf Of Greg Saunders Sent: Wednesday, January 23, 2013 4:13 PM To: Heaton, Joseph@Wildlife; MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 which rollup I think the wording on the documentation should be better. I also now think the message is what you normally see, but they worded it in such a way that it can be misleading. It had me thinking maybe it should be saying something different than native images. But all looks good. It installed and no errors in the logs or otherwise. Thanks again for the reply! On Wed, Jan 23, 2013 at 7:14 PM, Micallef J. joh...@westbourne.vic.edu.aumailto:joh...@westbourne.vic.edu.au wrote: Hi Greg. Just recently installed these roll ups. Got the same message and took a couple of minutes before letting us actually install. I noticed they took longer on our mailbox servers (for what ever reason). I actually did go into the IE settings and unchecked the Check for publisher's certificate revocation and then enabled it after setup was complete (even though the servers have internet access). I would think that the message should come up regardless and will take time depending on how long it takes to compile the images. From: gsaunders.myitanal...@gmail.commailto:gsaunders.myitanal...@gmail.com [mailto:gsaunders.myitanal...@gmail.commailto:gsaunders.myitanal...@gmail.com] On Behalf Of Greg Saunders Sent: Thursday, 24 January 2013 10:26 AM To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 which rollup Hmmm maybe that is what it should say and the problem (if one has it) is very slow install which is not happening. Perhaps someone could confirm... as I don't have long install time, but I do see that message during install. On Wed, Jan 23, 2013 at 6:16 PM, Greg Saunders gsaund...@myitanalyst.commailto:gsaund...@myitanalyst.com wrote: Guys... not sure if this is a problem or not. I am installing Rollup 5 v2 and I see the following in the dialog box as it installs: setup wizard is generating native images for .net assemblies and following screen says: The setup wizard has finished generating native images for .NET assemblies Now my concern is over what I read here http://support.microsoft.com/?kbid=2785908http://support.microsoftcom/?kbid=2785908 which states: When you install this update rollup on a computer that is not connected to the Internet, you may experience long installation times. Additionally, you may receive the following message: Creating Native images for .Net assemblies. This behavior is caused by network requests to connect to the http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl website. These network requests represent attempts to access the certificate revocation list for each assembly that native image generation (NGen) compiles to native code. However, because the Exchange server is not connected to the Internet, each request must wait to time out before the process continues. I have full internet connectivity so I don't know if I am experiencing the issue they are talking about or not. I went ahead and followed the work around in the document and started again, but I see the same thing. Am I running into the problem they are describing or not? Should it be NOT saying native images? Greg On Wed, Jan 23, 2013 at 2:23 PM, Tobie Fysh tobie.f...@freebridge.org.ukmailto:tobie.f...@freebridge.org.uk wrote: Fine here on 5 v2, running two servers one UM, one CHM both on W2K8R2 on Hyper-V Sent from my Windows Phone From: Greg Saundersmailto:gsaund...@myitanalyst.com Sent: 23/01/2013 17:06 To: MS-Exchange Admin Issuesmailto:exchangelist@lyris.sunbelt-software.com Subject: Exchange 2010 SP2 which rollup With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist This message has been scanned by MimeCast on behalf of Freebridge Community Housing and found to be free of viruses and not SPAM. If you have any concerns about the message contents please contact the ICT ServiceDesk. http://www.freebridge.org.uk This e-mail (including any attachments), is confidential and intended only for the use of the addressee(s
Re: Exchange 2010 SP2 which rollup
Hi Greg I am on the latest rollup and it is working fine. Steve On Wed, Jan 23, 2013 at 10:31 AM, Greg Saunders gsaund...@myitanalyst.comwrote: With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 which rollup
Ditto... the interesting update will be SP3. Brandon From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, January 23, 2013 11:33 AM To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 which rollup Hi Greg I am on the latest rollup and it is working fine. Steve On Wed, Jan 23, 2013 at 10:31 AM, Greg Saunders gsaund...@myitanalyst.commailto:gsaund...@myitanalyst.com wrote: With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 which rollup
We're on 5 v2 John W. Cook Network Operations Manager Partnership For Strong Families 5950 NW 1st Place Gainesville, Fl 32607 Office (352) 244-1610 Cell (352) 215-6944 MCSE, MCP+I, MCTS, CompTIA A+, N+, VSP4, VTSP4 From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, January 23, 2013 12:33 PM To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 which rollup Hi Greg I am on the latest rollup and it is working fine. Steve On Wed, Jan 23, 2013 at 10:31 AM, Greg Saunders gsaund...@myitanalyst.commailto:gsaund...@myitanalyst.com wrote: With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist CONFIDENTIALITY STATEMENT: The information transmitted, or contained or attached to or with this Notice is intended only for the person or entity to which it is addressed and may contain Protected Health Information (PHI), confidential and/or privileged material. Any review, transmission, dissemination, or other use of, and taking any action in reliance upon this information by persons or entities other than the intended recipient without the express written consent of the sender are prohibited. This information may be protected by the Health Insurance Portability and Accountability Act of 1996 (HIPAA), and other Federal and Florida laws. Improper or unauthorized use or disclosure of this information could result in civil and/or criminal penalties. Consider the environment. Please don't print this e-mail unless you really need to. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 which rollup
Fine here on 5 v2, running two servers one UM, one CHM both on W2K8R2 on Hyper-V Sent from my Windows Phone From: Greg Saundersmailto:gsaund...@myitanalyst.com Sent: 23/01/2013 17:06 To: MS-Exchange Admin Issuesmailto:exchangelist@lyris.sunbelt-software.com Subject: Exchange 2010 SP2 which rollup With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist This message has been scanned by MimeCast on behalf of Freebridge Community Housing and found to be free of viruses and not SPAM. If you have any concerns about the message contents please contact the ICT ServiceDesk. http://www.freebridge.org.uk http://twitter.com/Freebridge http://www.facebook.com/pages/Kings-Lynn-United-Kingdom/Freebridge-Community-Housing/192690183387?v=box_3 This e-mail (including any attachments), is confidential and intended only for the use of the addressee(s). It may contain information covered by legal, professional or other privilege. If you are not an addressee, please inform the sender immediately and destroy this e-mail. Do not copy, use or disclose this e-mail. E-mail transmission cannot be guaranteed to be secure or error free. The sender does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard copy version. Freebridge Community Housing Ltd is a Charitable Industrial and Provident Society - Reg No IP29744R Registered with the Housing Corporation - No L4463. VAT Registration Number 860762121 Freebridge Community Housing, Juniper House, Austin Street, Kings Lynn, Norfolk PE30 1DZ This email message has been scanned for viruses by Mimecast. Mimecast delivers a complete managed email solution from a single web based platform. For more information please visit http://www.mimecast.com --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelistinline: 113012319233701601.gifinline: 113012319233701801.gifinline: 113012319233702001.gif
Re: Exchange 2010 SP2 which rollup
Guys... not sure if this is a problem or not. I am installing Rollup 5 v2 and I see the following in the dialog box as it installs: setup wizard is generating native images for .net assemblies and following screen says: The setup wizard has finished generating native images for .NET assemblies Now my concern is over what I read here http://support.microsoft.com/?kbid=2785908 which states: When you install this update rollup on a computer that is not connected to the Internet, you may experience long installation times. Additionally, you may receive the following message: Creating Native images for .Net assemblies. This behavior is caused by network requests to connect to the http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl website. These network requests represent attempts to access the certificate revocation list for each assembly that native image generation (NGen) compiles to native code. However, because the Exchange server is not connected to the Internet, each request must wait to time out before the process continues. I have full internet connectivity so I don't know if I am experiencing the issue they are talking about or not. I went ahead and followed the work around in the document and started again, but I see the same thing. Am I running into the problem they are describing or not? Should it be NOT saying native images? Greg On Wed, Jan 23, 2013 at 2:23 PM, Tobie Fysh tobie.f...@freebridge.org.ukwrote: Fine here on 5 v2, running two servers one UM, one CHM both on W2K8R2 on Hyper-V Sent from my Windows Phone -- From: Greg Saunders gsaund...@myitanalyst.com Sent: 23/01/2013 17:06 To: MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com Subject: Exchange 2010 SP2 which rollup With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned by MimeCast on behalf of Freebridge Community Housing and found to be free of viruses and not SPAM. If you have any concerns about the message contents please contact the ICT ServiceDesk. -- [image: Freebridge Community Housing Logo]http://www.freebridge.org.uk [image: twitter.com/Freebridge] http://twitter.com/Freebridge [image: Freebridge on Facebook]http://www.facebook.com/pages/Kings-Lynn-United-Kingdom/Freebridge-Community-Housing/192690183387?v=box_3 This e-mail (including any attachments), is confidential and intended only for the use of the addressee(s). It may contain information covered by legal, professional or other privilege. If you are not an addressee, please inform the sender immediately and destroy this e-mail. Do not copy, use or disclose this e-mail. E-mail transmission cannot be guaranteed to be secure or error free. The sender does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard copy version. Freebridge Community Housing Ltd is a Charitable Industrial and Provident Society - Reg No IP29744R Registered with the Registered with the Homes Communities Agency - No L4463. VAT Registration Number 860762121 Freebridge Community Housing, Juniper House, Austin Street, Kings Lynn, Norfolk PE30 1DZ -- This email message has been scanned for viruses by Mimecast. Mimecast delivers a complete managed email solution from a single web based platform. For more information please visit http://www.mimecast.com -- --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 SP2 which rollup
Hmmm maybe that is what it should say and the problem (if one has it) is very slow install which is not happening. Perhaps someone could confirm... as I don't have long install time, but I do see that message during install. On Wed, Jan 23, 2013 at 6:16 PM, Greg Saunders gsaund...@myitanalyst.comwrote: Guys... not sure if this is a problem or not. I am installing Rollup 5 v2 and I see the following in the dialog box as it installs: setup wizard is generating native images for .net assemblies and following screen says: The setup wizard has finished generating native images for .NET assemblies Now my concern is over what I read here http://support.microsoft.com/?kbid=2785908 which states: When you install this update rollup on a computer that is not connected to the Internet, you may experience long installation times. Additionally, you may receive the following message: Creating Native images for .Net assemblies. This behavior is caused by network requests to connect to the http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl website. These network requests represent attempts to access the certificate revocation list for each assembly that native image generation (NGen) compiles to native code. However, because the Exchange server is not connected to the Internet, each request must wait to time out before the process continues. I have full internet connectivity so I don't know if I am experiencing the issue they are talking about or not. I went ahead and followed the work around in the document and started again, but I see the same thing. Am I running into the problem they are describing or not? Should it be NOT saying native images? Greg On Wed, Jan 23, 2013 at 2:23 PM, Tobie Fysh tobie.f...@freebridge.org.ukwrote: Fine here on 5 v2, running two servers one UM, one CHM both on W2K8R2 on Hyper-V Sent from my Windows Phone -- From: Greg Saunders gsaund...@myitanalyst.com Sent: 23/01/2013 17:06 To: MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com Subject: Exchange 2010 SP2 which rollup With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned by MimeCast on behalf of Freebridge Community Housing and found to be free of viruses and not SPAM. If you have any concerns about the message contents please contact the ICT ServiceDesk. -- [image: Freebridge Community Housing Logo]http://www.freebridge.org.uk [image: twitter.com/Freebridge] http://twitter.com/Freebridge [image: Freebridge on Facebook]http://www.facebook.com/pages/Kings-Lynn-United-Kingdom/Freebridge-Community-Housing/192690183387?v=box_3 This e-mail (including any attachments), is confidential and intended only for the use of the addressee(s). It may contain information covered by legal, professional or other privilege. If you are not an addressee, please inform the sender immediately and destroy this e-mail. Do not copy, use or disclose this e-mail. E-mail transmission cannot be guaranteed to be secure or error free. The sender does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard copy version. Freebridge Community Housing Ltd is a Charitable Industrial and Provident Society - Reg No IP29744R Registered with the Registered with the Homes Communities Agency - No L4463. VAT Registration Number 860762121 Freebridge Community Housing, Juniper House, Austin Street, Kings Lynn, Norfolk PE30 1DZ -- This email message has been scanned for viruses by Mimecast. Mimecast delivers a complete managed email solution from a single web based platform. For more information please visit http://www.mimecast.com -- --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 which rollup
Hi Greg. Just recently installed these roll ups. Got the same message and took a couple of minutes before letting us actually install. I noticed they took longer on our mailbox servers (for what ever reason). I actually did go into the IE settings and unchecked the Check for publisher's certificate revocation and then enabled it after setup was complete (even though the servers have internet access). I would think that the message should come up regardless and will take time depending on how long it takes to compile the images. From: gsaunders.myitanal...@gmail.com [mailto:gsaunders.myitanal...@gmail.com] On Behalf Of Greg Saunders Sent: Thursday, 24 January 2013 10:26 AM To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 which rollup Hmmm maybe that is what it should say and the problem (if one has it) is very slow install which is not happening. Perhaps someone could confirm... as I don't have long install time, but I do see that message during install. On Wed, Jan 23, 2013 at 6:16 PM, Greg Saunders gsaund...@myitanalyst.commailto:gsaund...@myitanalyst.com wrote: Guys... not sure if this is a problem or not. I am installing Rollup 5 v2 and I see the following in the dialog box as it installs: setup wizard is generating native images for .net assemblies and following screen says: The setup wizard has finished generating native images for .NET assemblies Now my concern is over what I read here http://support.microsoft.com/?kbid=2785908 which states: When you install this update rollup on a computer that is not connected to the Internet, you may experience long installation times. Additionally, you may receive the following message: Creating Native images for .Net assemblies. This behavior is caused by network requests to connect to the http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl website. These network requests represent attempts to access the certificate revocation list for each assembly that native image generation (NGen) compiles to native code. However, because the Exchange server is not connected to the Internet, each request must wait to time out before the process continues. I have full internet connectivity so I don't know if I am experiencing the issue they are talking about or not. I went ahead and followed the work around in the document and started again, but I see the same thing. Am I running into the problem they are describing or not? Should it be NOT saying native images? Greg On Wed, Jan 23, 2013 at 2:23 PM, Tobie Fysh tobie.f...@freebridge.org.ukmailto:tobie.f...@freebridge.org.uk wrote: Fine here on 5 v2, running two servers one UM, one CHM both on W2K8R2 on Hyper-V Sent from my Windows Phone From: Greg Saundersmailto:gsaund...@myitanalyst.com Sent: 23/01/2013 17:06 To: MS-Exchange Admin Issuesmailto:exchangelist@lyris.sunbelt-software.com Subject: Exchange 2010 SP2 which rollup With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist This message has been scanned by MimeCast on behalf of Freebridge Community Housing and found to be free of viruses and not SPAM. If you have any concerns about the message contents please contact the ICT ServiceDesk. http://www.freebridge.org.uk http://www.freebridge.org.uk http://www.freebridge.org.uk This e-mail (including any attachments), is confidential and intended only for the use of the addressee(s). It may contain information covered by legal, professional or other privilege. If you are not an addressee, please inform the sender immediately and destroy this e-mail. Do not copy, use or disclose this e-mail.http://www.freebridge.org.uk E-mail transmission cannot be guaranteed to be secure or error free. The sender does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard copy version.http://www.freebridge.org.uk Freebridge Community Housing Ltd is a Charitable Industrial and Provident Society - Reg No IP29744R Registered with the Registered with the Homes Communities Agency - No L4463. VAT Registration Number 860762121http://www.freebridge.org.uk Freebridge Community Housing, Juniper House, Austin Street, Kings Lynn, Norfolk PE30 1DZhttp://www.freebridge.org.uk http://www.freebridge.org.uk This email message has been scanned for viruses by Mimecast. Mimecast delivers
Re: Exchange 2010 SP2 which rollup
I think the wording on the documentation should be better. I also now think the message is what you normally see, but they worded it in such a way that it can be misleading. It had me thinking maybe it should be saying something different than native images. But all looks good. It installed and no errors in the logs or otherwise. Thanks again for the reply! On Wed, Jan 23, 2013 at 7:14 PM, Micallef J. joh...@westbourne.vic.edu.auwrote: Hi Greg. ** ** Just recently installed these roll ups. Got the same message and took a couple of minutes before letting us actually install. ** ** I noticed they took longer on our mailbox servers (for what ever reason). I actually did go into the IE settings and unchecked the Check for publisher's certificate revocation and then enabled it after setup was complete (even though the servers have internet access). ** ** I would think that the message should come up regardless and will take time depending on how long it takes to compile the images. ** ** *From:* gsaunders.myitanal...@gmail.com [mailto: gsaunders.myitanal...@gmail.com] *On Behalf Of *Greg Saunders *Sent:* Thursday, 24 January 2013 10:26 AM *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2010 SP2 which rollup ** ** Hmmm maybe that is what it should say and the problem (if one has it) is very slow install which is not happening. Perhaps someone could confirm... as I don't have long install time, but I do see that message during install. On Wed, Jan 23, 2013 at 6:16 PM, Greg Saunders gsaund...@myitanalyst.com wrote: Guys... not sure if this is a problem or not. I am installing Rollup 5 v2 and I see the following in the dialog box as it installs: setup wizard is generating native images for .net assemblies and following screen says: The setup wizard has finished generating native images for .NET assemblies Now my concern is over what I read here http://support.microsoft.com/?kbid=2785908 which states: When you install this update rollup on a computer that is not connected to the Internet, you may experience long installation times. Additionally, you may receive the following message: Creating Native images for .Net assemblies. This behavior is caused by network requests to connect to the http://crl.microsoft.com/pki/crl/products/CodeSigPCA.crl website. These network requests represent attempts to access the certificate revocation list for each assembly that native image generation (NGen) compiles to native code. However, because the Exchange server is not connected to the Internet, each request must wait to time out before the process continues. I have full internet connectivity so I don't know if I am experiencing the issue they are talking about or not. I went ahead and followed the work around in the document and started again, but I see the same thing. Am I running into the problem they are describing or not? Should it be NOT saying native images? Greg On Wed, Jan 23, 2013 at 2:23 PM, Tobie Fysh tobie.f...@freebridge.org.uk wrote: Fine here on 5 v2, running two servers one UM, one CHM both on W2K8R2 on Hyper-V Sent from my Windows Phone -- *From: *Greg Saunders gsaund...@myitanalyst.com *Sent: *23/01/2013 17:06 *To: *MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com *Subject: *Exchange 2010 SP2 which rollup With Exchange 2010 SP2 there are some rollup's available. Which one is recommended by the gurus at this time? I know a number of people who are just on rollup 3, some one rollup 4 and a few on rollup 5v2. Should I go ahead and go with 5v2 or step back to 3 or 4? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist ** ** -- This message has been scanned by MimeCast on behalf of Freebridge Community Housing and found to be free of viruses and not SPAM. If you have any concerns about the message contents please contact the ICT ServiceDesk. -- http://www.freebridge.org.uk http://www.freebridge.org.uk http://www.freebridge.org.uk http://www.freebridge.org.uk This e-mail (including any attachments), is confidential and intended only for the use of the addressee(s). It may contain information covered by legal, professional or other privilege. If you are not an addressee, please inform the sender immediately and destroy this e-mail. Do not copy, use or disclose this e-mail. http://www.freebridge.org.uk E-mail transmission cannot be guaranteed to be secure or error free. The sender does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification
RE: Exchange 2010 SP2 UR3 upgrade - load balance issues
Sigh, Nice vendor, they should have at least walked you through the logs to see why the lb thinks node1 is not available. Did you look in the iis logs on the first node? From: xyz [x...@minneapolis.edu] Sent: Saturday, November 10, 2012 6:06 PM To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 UR3 upgrade - load balance issues Greetings, Exchange 2010 SP2 UR3 W2K8 R2 SP1. Two Node DAG. SERVER1 and SERVER2 each run MAILBOX, CAS and HUB TRANSPORT roles. Hardware load balancer (Not MS NLB). SP2 UR3 applied successfully ( thank for all the list planning tips as that was a big help). SERVER1 is the active mailbox and mailboxes are available. End users are not seeing issues best we can tell. SMTP load balancing appears to be working per Hardware load balancer connection screens. However, looking at Hardware Load Balancer screens, we see about 160 connections to SERVER2, and only a couple to SERVER1 and normal on this LB is pretty even 50/50 mix. The load has not evened out over the last 24 hours. We verified server1 is responding by bypassing LB and going direct to SERVER1/OWA with no issues. I have a call to LB vendor support, but of course they want me to verify that all is well on the MS end and rule out anything that might have been caused by the SP2 UR3 upgrade. I have looked at the SERVER1 basic EVENT logs for anything that sticks out and not seeing anything. However I don’t have any experience troubleshooting the EXCHANGE LB application operations side, just the configs on the Hardware LB, and from what I can tell at this point, the Hardware LB all looks normal and connected to both SERVER1 and SERVER2. The load is simply not balancing and most connections seem to be going to SERVER2. Where would I check on the MS EXCHANGE side for data on what is happening for load balancing. Thanks for any ideas as I sift through google searches and TIDs. Dana --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 and CuCM v851
8.6.2. From: bounce-9552771-8066...@lyris.sunbelt-software.com [mailto:bounce-9552771-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:24 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 That is helpful to hear, thank you. I would be interested to know what your CuCM version is tomorrow, and just to confirm you are using the Exchange UC features for your voicemail platform as opposed to the Cisco Unity product? Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.com | www.stinson.comhttp://www.stinson.com From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Tuesday, October 02, 2012 4:17 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 Not sure. We’re using CUCM but I believe it’s more around v7.5. Can double check tomorrow – but otherwise, we’re on SP2 and it’s working fine. From: bounce-9552767-8066...@lyris.sunbelt-software.com [mailto:bounce-9552767-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:01 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 and CuCM v851 We are using the UC features of Exchange 2010 SP1 RU5 to satisfy our voicemail service requirements in conjunction with Cisco Unified Call Manager. This was a near perfect solution until we updated our CuCM servers to version v8.5.1.13900-5, and the outsourced engineer cautioned management against upgrading to Exchange 2010 SP2. I have opened Cisco TAC tickets to confirm compatibility with no success. Clearly they have no incentive to validate the interoperability of these two systems. Can anyone confirm a successful coexistence with a similar Cisco CuCM v8.51 Exchange SP2 UC environment? Your time and trouble are greatly appreciated. Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.commailto:kbe...@stinson.com | www.stinson.comhttp://www.stinson.com Please consider the environment before printing this e-mail. This communication is from a law firm and may contain confidential and/or privileged information. If it has been sent to you in error, please contact the sender for instructions concerning return or destruction, and do not use or disclose the contents to others. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 and CuCM v851
That is helpful to hear, thank you. I would be interested to know what your CuCM version is tomorrow, and just to confirm you are using the Exchange UC features for your voicemail platform as opposed to the Cisco Unity product? Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.com | www.stinson.comhttp://www.stinson.com From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Tuesday, October 02, 2012 4:17 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 Not sure. We’re using CUCM but I believe it’s more around v7.5. Can double check tomorrow – but otherwise, we’re on SP2 and it’s working fine. From: bounce-9552767-8066...@lyris.sunbelt-software.com [mailto:bounce-9552767-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:01 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 and CuCM v851 We are using the UC features of Exchange 2010 SP1 RU5 to satisfy our voicemail service requirements in conjunction with Cisco Unified Call Manager. This was a near perfect solution until we updated our CuCM servers to version v8.5.1.13900-5, and the outsourced engineer cautioned management against upgrading to Exchange 2010 SP2. I have opened Cisco TAC tickets to confirm compatibility with no success. Clearly they have no incentive to validate the interoperability of these two systems. Can anyone confirm a successful coexistence with a similar Cisco CuCM v8.51 Exchange SP2 UC environment? Your time and trouble are greatly appreciated. Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.commailto:kbe...@stinson.com | www.stinson.comhttp://www.stinson.com Please consider the environment before printing this e-mail. This communication is from a law firm and may contain confidential and/or privileged information. If it has been sent to you in error, please contact the sender for instructions concerning return or destruction, and do not use or disclose the contents to others. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 and CuCM v851
Yes, Exchange voicemail. From: bounce-9552771-8066...@lyris.sunbelt-software.com [mailto:bounce-9552771-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:24 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 That is helpful to hear, thank you. I would be interested to know what your CuCM version is tomorrow, and just to confirm you are using the Exchange UC features for your voicemail platform as opposed to the Cisco Unity product? Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.commailto:kbe...@stinson.com | www.stinson.comhttp://www.stinson.com From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Tuesday, October 02, 2012 4:17 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 Not sure. We’re using CUCM but I believe it’s more around v7.5. Can double check tomorrow – but otherwise, we’re on SP2 and it’s working fine. From: bounce-9552767-8066...@lyris.sunbelt-software.commailto:bounce-9552767-8066...@lyris.sunbelt-software.com [mailto:bounce-9552767-8066...@lyris.sunbelt-software.com]mailto:[mailto:bounce-9552767-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:01 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 and CuCM v851 We are using the UC features of Exchange 2010 SP1 RU5 to satisfy our voicemail service requirements in conjunction with Cisco Unified Call Manager. This was a near perfect solution until we updated our CuCM servers to version v8.5.1.13900-5, and the outsourced engineer cautioned management against upgrading to Exchange 2010 SP2. I have opened Cisco TAC tickets to confirm compatibility with no success. Clearly they have no incentive to validate the interoperability of these two systems. Can anyone confirm a successful coexistence with a similar Cisco CuCM v8.51 Exchange SP2 UC environment? Your time and trouble are greatly appreciated. Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.commailto:kbe...@stinson.com | www.stinson.comhttp://www.stinson.com Please consider the environment before printing this e-mail. This communication is from a law firm and may contain confidential and/or privileged information. If it has been sent to you in error, please contact the sender for instructions concerning return or destruction, and do not use or disclose the contents to others. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 and CuCM v851
Been a while but had SP2 thru TAP last year and no issues against CUCM 7.3.x IIRC, worked fine. Again, Exchange Unified Messaging. Steve From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: 02 October 2012 22:37 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 Yes, Exchange voicemail. From: bounce-9552771-8066...@lyris.sunbelt-software.commailto:bounce-9552771-8066...@lyris.sunbelt-software.com [mailto:bounce-9552771-8066...@lyris.sunbelt-software.com]mailto:[mailto:bounce-9552771-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:24 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 That is helpful to hear, thank you. I would be interested to know what your CuCM version is tomorrow, and just to confirm you are using the Exchange UC features for your voicemail platform as opposed to the Cisco Unity product? Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.commailto:kbe...@stinson.com | www.stinson.comhttp://www.stinson.com From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Tuesday, October 02, 2012 4:17 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 and CuCM v851 Not sure. We’re using CUCM but I believe it’s more around v7.5. Can double check tomorrow – but otherwise, we’re on SP2 and it’s working fine. From: bounce-9552767-8066...@lyris.sunbelt-software.commailto:bounce-9552767-8066...@lyris.sunbelt-software.com [mailto:bounce-9552767-8066...@lyris.sunbelt-software.com]mailto:[mailto:bounce-9552767-8066...@lyris.sunbelt-software.com] On Behalf Of Beahm, Keith Sent: 02 October 2012 22:01 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 and CuCM v851 We are using the UC features of Exchange 2010 SP1 RU5 to satisfy our voicemail service requirements in conjunction with Cisco Unified Call Manager. This was a near perfect solution until we updated our CuCM servers to version v8.5.1.13900-5, and the outsourced engineer cautioned management against upgrading to Exchange 2010 SP2. I have opened Cisco TAC tickets to confirm compatibility with no success. Clearly they have no incentive to validate the interoperability of these two systems. Can anyone confirm a successful coexistence with a similar Cisco CuCM v8.51 Exchange SP2 UC environment? Your time and trouble are greatly appreciated. Keith D. Beahm | Network Engineer | Stinson Morrison Hecker LLP 1201 Walnut Street, Suite 2900 | Kansas City, MO 64106-2150 T: 816.691.3374 kbe...@stinson.commailto:kbe...@stinson.com | www.stinson.comhttp://www.stinson.com Please consider the environment before printing this e-mail. This communication is from a law firm and may contain confidential and/or privileged information. If it has been sent to you in error, please contact the sender for instructions concerning return or destruction, and do not use or disclose the contents to others. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 sp2
It might have been worth waiting. The bugs fixed in SP2 RU1 aren't minor. We're happily running SP2 RU2 here. Cheers, Phil -- Phil Randal Infrastructure Engineer Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk From: steve ens [mailto:stevey...@gmail.com] Sent: 23 May 2012 19:40 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 sp2 LOL - the RSS feed perhaps just got updated? Sent from my BlackBird. From: Heaton, Joseph@DFG jhea...@dfg.ca.govmailto:jhea...@dfg.ca.gov Date: Wed, 23 May 2012 18:02:58 + To: MS-Exchange Admin Issuesexchangelist@lyris.sunbelt-software.commailto:exchangelist@lyris.sunbelt-software.com ReplyTo: MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.commailto:exchangelist@lyris.sunbelt-software.com Subject: RE: Exchange 2010 sp2 Aww, Steve got a late Christmas present. Congrats! From: Jim Kennedy [kennedy...@elyriaschools.org] Sent: Wednesday, May 23, 2012 10:36 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Exchange 2010 sp2 New to you. :) It came out in December. From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, May 23, 2012 1:33 PM To: MS-Exchange Admin Issues Subject: Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 sp2
Yeah, we installed SP2 back in January, but I have a colleague who is hesitant about installing RU2. (eyeroll) fortunately we are not in production yet.. Jonathan, A+, MCSA, MCSE On May 24, 2012 5:38 AM, Randal, Phil phil.ran...@hoopleltd.co.uk wrote: It might have been worth waiting. The bugs fixed in SP2 RU1 aren’t minor. We’re happily running SP2 RU2 here. Cheers, Phil -- *Phil Randal* *Infrastructure Engineer* *Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT* Tel: 01432 260415 | Email: phil.ran...@hoopleltd.co.uk *From:* steve ens [mailto:stevey...@gmail.com] *Sent:* 23 May 2012 19:40 *To:* MS-Exchange Admin Issues *Subject:* Re: Exchange 2010 sp2 LOL - the RSS feed perhaps just got updated? Sent from my BlackBird. -- *From: *Heaton, Joseph@DFG jhea...@dfg.ca.gov *Date: *Wed, 23 May 2012 18:02:58 + *To: *MS-Exchange Admin Issuesexchangelist@lyris.sunbelt-software.com *ReplyTo: *MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com *Subject: *RE: Exchange 2010 sp2 Aww, Steve got a late Christmas present. Congrats! -- *From:* Jim Kennedy [kennedy...@elyriaschools.org] *Sent:* Wednesday, May 23, 2012 10:36 AM *To:* Heaton, Joseph@DFG; MS-Exchange Admin Issues *Subject:* RE: Exchange 2010 sp2 New to you. J It came out in December. *From:* Steve Ens [mailto:stevey...@gmail.com stevey...@gmail.com] *Sent:* Wednesday, May 23, 2012 1:33 PM *To:* MS-Exchange Admin Issues *Subject:* Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist “Any opinion expressed in this e-mail or any attached files are those of the individual and not necessarily those of Hoople Ltd. You should be aware that Hoople Ltd. monitors its email service. This e-mail and any attached files are confidential and intended solely for the use of the addressee. This communication may contain material protected by law from being passed on. If you are not the intended recipient and have received this e-mail in error, you are advised that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender immediately and destroy all copies of it. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 sp2
No. It's been out a couple months and is already on it's second rollup. -- Sent using BlackBerry From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, May 23, 2012 01:28 PM To: MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com Subject: Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 sp2
New to you. :) It came out in December. From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, May 23, 2012 1:33 PM To: MS-Exchange Admin Issues Subject: Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 sp2
Aww, Steve got a late Christmas present. Congrats! From: Jim Kennedy [kennedy...@elyriaschools.org] Sent: Wednesday, May 23, 2012 10:36 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Exchange 2010 sp2 New to you. :) It came out in December. From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, May 23, 2012 1:33 PM To: MS-Exchange Admin Issues Subject: Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 sp2
LOL - the RSS feed perhaps just got updated? Sent from my BlackBird. -Original Message- From: Heaton, Joseph@DFG jhea...@dfg.ca.gov Date: Wed, 23 May 2012 18:02:58 To: MS-Exchange Admin Issuesexchangelist@lyris.sunbelt-software.com Reply-To: MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.comSubject: RE: Exchange 2010 sp2 Aww, Steve got a late Christmas present. Congrats! From: Jim Kennedy [kennedy...@elyriaschools.org] Sent: Wednesday, May 23, 2012 10:36 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Exchange 2010 sp2 New to you. :) It came out in December. From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, May 23, 2012 1:33 PM To: MS-Exchange Admin Issues Subject: Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 sp2
Two of them, no? Blackberry From: Maglinger, Paul [mailto:pmaglin...@scvl.com] Sent: Wednesday, May 23, 2012 02:24 PM To: MS-Exchange Admin Issues exchangelist@lyris.sunbelt-software.com Subject: RE: Exchange 2010 sp2 No… they’ve even got a release update since that service pack now. From: Steve Ens [mailto:stevey...@gmail.com] Sent: Wednesday, May 23, 2012 12:29 PM To: MS-Exchange Admin Issues Subject: Exchange 2010 sp2 is out...that's new isnt it? --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 sp2 and ios 5 logfile issue
Only iOS version 4.0 caused problems here. We quickly got them upgraded. No problems since. Androids, that's another story. 2012/1/25 Joseph L. Casale jcas...@activenetwerx.com So stopping MSExchangeSyncAppPool quashed the insane growth, the only change that day was the CO's new fuggin POS iPhone that got updated straight away to the latest ios. Anyone else seen this? I cant leave his new toy disable for long:) jlc --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- smsadm --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 sp2 and ios 5 logfile issue
Tell you the truth, I am not convinced its ios5 anymore, that phone had been disabled yet with the app pool enabled, the logs grow madly. I logged a case with PSS... jlc From: Adm [sms...@gmail.com] Sent: Thursday, January 26, 2012 7:24 AM To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 sp2 and ios 5 logfile issue Only iOS version 4.0 caused problems here. We quickly got them upgraded. No problems since. Androids, that's another story. 2012/1/25 Joseph L. Casale jcas...@activenetwerx.com So stopping MSExchangeSyncAppPool quashed the insane growth, the only change that day was the CO's new fuggin POS iPhone that got updated straight away to the latest ios. Anyone else seen this? I cant leave his new toy disable for long:) jlc --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- smsadm --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Thx, we are waiting a few weeks just to make sure there is not some crazy issue. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:07 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I asked, but got no response. I would suggest you go with 5.0.3. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 10:17 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Just an FYI.. http://us.blackberry.com/support/software/server_express_exchange_aug_10_11.pdf Their site is not updated for Sp2 yet. Haven't been able to find anything through google. Do you have any direct links? Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:25 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I personally have not, but many members of the TAP were using BES. I know it works, but I believe there was some minimum level required. It should be on the RIM site. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 9:21 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Been running it in corp for some time now. BPOS next. M -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Wednesday, December 07, 2011 8:48 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Thx, we are waiting a few weeks just to make sure there is not some crazy issue. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:07 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I asked, but got no response. I would suggest you go with 5.0.3. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 10:17 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Just an FYI.. http://us.blackberry.com/support/software/server_express_exchange_aug_10_11. pdf Their site is not updated for Sp2 yet. Haven't been able to find anything through google. Do you have any direct links? Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:25 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I personally have not, but many members of the TAP were using BES. I know it works, but I believe there was some minimum level required. It should be on the RIM site. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 9:21 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage
RE: Exchange 2010 SP2 is now available
Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
I personally have not, but many members of the TAP were using BES. I know it works, but I believe there was some minimum level required. It should be on the RIM site. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 9:21 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Anyone done any testing with the sp2 hosting yet? Can't find much out there in regards to commands. -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: 06 December 2011 14:21 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Awesome. Thx Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:25 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I personally have not, but many members of the TAP were using BES. I know it works, but I believe there was some minimum level required. It should be on the RIM site. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 9:21 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Just an FYI.. http://us.blackberry.com/support/software/server_express_exchange_aug_10_11.pdf Their site is not updated for Sp2 yet. Haven't been able to find anything through google. Do you have any direct links? Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:25 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I personally have not, but many members of the TAP were using BES. I know it works, but I believe there was some minimum level required. It should be on the RIM site. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 9:21 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
http://www.microsoft.com/download/en/details.aspx?id=28192 ExtendASP's product is already working. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Paul Cookman [mailto:paul.cook...@selection.co.uk] Sent: Tuesday, December 06, 2011 9:36 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Anyone done any testing with the sp2 hosting yet? Can't find much out there in regards to commands. -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: 06 December 2011 14:21 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Any powershell stuff? -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: 06 December 2011 16:43 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available http://www.microsoft.com/download/en/details.aspx?id=28192 ExtendASP's product is already working. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Paul Cookman [mailto:paul.cook...@selection.co.uk] Sent: Tuesday, December 06, 2011 9:36 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Anyone done any testing with the sp2 hosting yet? Can't find much out there in regards to commands. -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: 06 December 2011 14:21 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Not to my knowledge. The goal was to provide guidelines which, when used along with ABP's, were supportable; and then to provide a certification program for vendors. There is a webpage that lists the vendors who are either certified or in the process of being certified here: http://technet.microsoft.com/en-us/exchange/hh563895.aspx Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Paul Cookman [mailto:paul.cook...@selection.co.uk] Sent: Tuesday, December 06, 2011 12:06 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Any powershell stuff? -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: 06 December 2011 16:43 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available http://www.microsoft.com/download/en/details.aspx?id=28192 ExtendASP's product is already working. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Paul Cookman [mailto:paul.cook...@selection.co.uk] Sent: Tuesday, December 06, 2011 9:36 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Anyone done any testing with the sp2 hosting yet? Can't find much out there in regards to commands. -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: 06 December 2011 14:21 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
I asked, but got no response. I would suggest you go with 5.0.3. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 10:17 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Just an FYI.. http://us.blackberry.com/support/software/server_express_exchange_aug_10_11.pdf Their site is not updated for Sp2 yet. Haven't been able to find anything through google. Do you have any direct links? Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 06, 2011 9:25 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available I personally have not, but many members of the TAP were using BES. I know it works, but I believe there was some minimum level required. It should be on the RIM site. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Greg Sweers [mailto:gswe...@acts360.com] Sent: Tuesday, December 06, 2011 9:21 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Curious if anyone has loaded SP2 with BES services in the mix. We have two clients that still run BES with Exchange 2010 and the Gal segmentation is a biggie for them. Greg Sweers CEO ACTS360.com P.O. Box 1193 Brandon, FL 33509 813-657-0849 Office 813-758-6850 Cell 813-341-1270 Fax -Original Message- From: Steve Goodman [mailto:st...@goodman.net] Sent: Monday, December 05, 2011 8:10 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Any documentation on setting up the hosting side yet? From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: 05 December 2011 10:38 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 is now available http://www.microsoft.com/download/en/details.aspx?id=28190 Note, the SP requires a schema update to your AD. Enjoy! Richard --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
Re: Exchange 2010 SP2 is now available
Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
That's an easy one: deploy it when you feel that your own testing is completed, and/or you have appropriate recovery procedures in place should the worst happen. For me, I'm going to deploy it on a single server basic installation, and build a full Exchange test site based on 2010 SP1 where SP2 will be the first to get the testing treatment. Richard -Original Message- From: bounce-9463861-8066...@lyris.sunbelt-software.com [mailto:bounce-9463861-8066...@lyris.sunbelt-software.com] On Behalf Of Philip Cobb Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Wrong person to ask - but I'd start checking Technet and other common resources. Richard From: bounce-9463852-8066...@lyris.sunbelt-software.com [mailto:bounce-9463852-8066...@lyris.sunbelt-software.com] On Behalf Of Paul Cookman Sent: 05 December 2011 11:03 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Any documentation on setting up the hosting side yet? From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: 05 December 2011 10:38 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 is now available http://www.microsoft.com/download/en/details.aspx?id=28190 Note, the SP requires a schema update to your AD. Enjoy! Richard --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
Documentation will follow as the west coast of the USA wakes up. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Monday, December 05, 2011 6:59 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Wrong person to ask - but I'd start checking Technet and other common resources. Richard From: bounce-9463852-8066...@lyris.sunbelt-software.commailto:bounce-9463852-8066...@lyris.sunbelt-software.com [mailto:bounce-9463852-8066...@lyris.sunbelt-software.com]mailto:[mailto:bounce-9463852-8066...@lyris.sunbelt-software.com] On Behalf Of Paul Cookman Sent: 05 December 2011 11:03 To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available Any documentation on setting up the hosting side yet? From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: 05 December 2011 10:38 To: MS-Exchange Admin Issues Subject: Exchange 2010 SP2 is now available http://www.microsoft.com/download/en/details.aspx?id=28190 Note, the SP requires a schema update to your AD. Enjoy! Richard --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
I've been running it several months with no problems; as have a lot of other companies, large and small. Of course, that doesn't speak to any particular environment but my own. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Monday, December 05, 2011 6:58 AM To: MS-Exchange Admin Issues Subject: RE: Exchange 2010 SP2 is now available That's an easy one: deploy it when you feel that your own testing is completed, and/or you have appropriate recovery procedures in place should the worst happen. For me, I'm going to deploy it on a single server basic installation, and build a full Exchange test site based on 2010 SP1 where SP2 will be the first to get the testing treatment. Richard -Original Message- From: bounce-9463861-8066...@lyris.sunbelt-software.com [mailto:bounce-9463861-8066...@lyris.sunbelt-software.com] On Behalf Of Philip Cobb Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
I think that Address Book Policies are pretty important. I think that the return of OMA is pretty important. But you've gotta test what's important to you. It's worked well for me. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: Monday, December 05, 2011 6:38 AM To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Exchange 2010 SP2 is now available
As others said you need to test where it matters to you; no doubt the technet forums will be awash with people who'd had issues and it's worth watching for anything not caught by TAP. My personal experience with SP2 via TAP was that it was a fairly painless upgrade (across a fairly large multi-site Exchange environment); as with SP1 reading the release notes, using ExBPA to clear up any underlying issues and looking for any non-default/unsupported settings should assist with making sure nothing bites you; and of course having a test environment with a similar configuration to your production environment will help no end in testing. Steve -Original Message- From: Philip Cobb [mailto:philip.c...@gmail.com] Sent: 05 December 2011 11:38 To: MS-Exchange Admin Issues Subject: Re: Exchange 2010 SP2 is now available Richard Sobey wrote: http://www.microsoft.com/download/en/details.aspx?id=28190 How long before it's safe to deploy this into our live environments? Is there a must have that should drive me to install this SP? SP2 of 2007 gave me no end of nightmares! Cheers, Phil. -- Philip Cobb Infrastructure Manager, Holy Trinity Brompton. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
